Chamomile from the wheel. Tire beds: interesting ideas for do-it-yourself implementation

Old car tires are a popular replacement for traditional flower beds. It is convenient to place them in small yards without lawns, along roads, in places with high lying groundwater. The flowerpot from the tire is easy to move to any place on the site, if desired, it can be installed on legs. Another popular garden form- wheels laid in the form of a pyramid.

To create flower beds, it is better to use winter rubber products, they are much easier to cut. Old tires are thoroughly cleaned of gravel and other foreign matter, washed and dried. Then they can be painted in the desired shade, painted with an original pattern. Another popular option is flowerpots in the form of volumetric bowls. To make them, zigzag cuts are made on the top of the tire with a sharp knife or electric jigsaw. Turning the product is difficult, this will require significant physical strength.

In order for plants to develop well, fertile soil is necessary with big amount compost. During the planting season in tires, they are periodically fed with complex fertilizer for flowers. It is important to ensure that the soil does not dry out; planting in a limited capacity should be watered daily.

What flowers can be planted in tires

Most often, annuals are used for planting in flowerbeds from tires. Seeds germinate for several weeks, so it is more convenient to use grown seedlings. When planting, the needs of each particular plant are taken into account. For example, for the normal development of a bush petunia, at least 5 liters of soil are needed, ampelous forms will require up to 7 liters.

Flyers with beautiful shape buds and various colors. Regular and terry petunias, bush or cascade are popular. It is best to use modern hybrid forms, they form lush compact bushes with a large number of buds.

Nasturtiums look very impressive: orange, red, yellow. Nasturtium does not tolerate transplanting well, so seedlings are planted in tires in peat cups or sow swollen seeds. In rubber beds, you can plant decorative calendula and escholcia, these species form a beautiful composition. Another example of successful color combination- silver cineraria and bright red salvia.

Suitable annuals include viola, verbena, marigolds, subulate phloxes, celosia. Look more interesting tall plants- lupins, cosmea, saffron, fragrant tobacco. As an accompaniment, you can plant ground cover plants, such as alyssum with a delicate honey aroma.

Some gardeners plant perennials in homemade planters. When dividing the bushes, a lot remains planting material, tires will be an excellent field for experimentation. Small-flowered chrysanthemums can be planted in tires, different types carnations, primroses, daisies, daylilies, ornamental onions. Beautiful flowering plants worth adding fragrant herbs with elegant leaves - thyme, oregano, lemon balm, mint. They not only look beautiful, but also repel pests.

Do interesting flower bed with your own hands you can even from a car tire. Crafts from tires have long been a success for decorating the garden, and today we will tell you how to old tire make a simple mini-flower bed.

DIY tire flower bed

The easiest option is when you use the whole tires, putting them in the chosen place and filling them with earth. But before that, a drainage layer of pebbles, expanded clay or organic mulch must be laid under the rubber.

Such a mini-bed looks good from large tires when the usable area is wide enough to accommodate several rows. different plants creating an interesting composition. It is advisable to choose for landing unpretentious flowers- tall zinnias in the center; marigolds, ageratum or cineraria - along the edge.

If you make the flower bed higher by putting the tires one on top of the other, this will create additional convenience when caring for it. In this case, you can plant an ampelous petunia or lobelia along the edges to hide the view of the cracked cord.

If you are using small car tires, then to increase the area of \u200b\u200bthe mini-flower bed, cut off the top with an electric saw or a special knife.

However, black tires themselves look gloomy and trite. Take it one step further and paint them a bright color. And you will see flower beds, and the whole garden will become much more comfortable and more fun.

How to paint flower bed tires

In order for the old and cracked tire to take a bright color well, the rubber is degreased with acetone or white spirit, first painted with white or yellow paint, and only then applied bright. Then the color will not fade and will last a long time.

Good advice: do not put a thick layer of paint - under the influence of rain and frost, it will fall off in pieces.

What brand of paint< использовать, в принципе, не имеет значения.

Special paint for rubber does not crack in the cold and covers cracks and depressions well, but is quite expensive. Feel free to use old enamel or oil paint, which was left from the last repair.

Paint in spray cans will also work - it is even preferable, as it penetrates well into the cracks and is applied in a thin layer. With such a can, you can make any pattern on a painted surface, and without much difficulty get a multi-colored base for a flower bed.

Paint the tires in different colors and place them side by side or one above the other, or arrange them in a chaotic manner throughout the garden, or group them in one place - and your garden will noticeably come to life.

For those who know how to create crafts from tires using a special knife or saw, you can cut out flower beds in figurines of animals, birds or flowers with your own hands. If you need ideas and ways to make beautiful and intricate tire beds, I recommend reading another.

Used photos rlibunao, Jules.

(18 ratings, average: 4,17 out of 5)

Guided by the intentions to decorate the courtyard of their private house or transform their summer cottage, many owners are trying to find inexpensive, or better free, design options. In fact, there are quite a lot of such opportunities, and in skillful economic hands any site can be turned into a cozy and beautiful corner where you can enjoy all the delights that nature and man-made design give.

One of the most significant elements of the design of their acres are, of course, flower beds. Flowerbeds became widespread from old car tires. Such a product does not require large expenditures. The maximum investment is the cost of shipping tires and the cost of paint, everything else depends only on imagination and the ability to think outside the box.

It is possible to turn your yard or plot into a beautiful flower garden, where each flower is elegantly emphasized and brightly highlighted, or into an amazing garden, where each tree is decorated in an individual style, if you learn how to make flowerbeds from tires with your own hands.

Tire advantage

Old tires fully justify their popularity. You can find them anywhere, you do not need to pay for them, and in skillful hands ready product will have a stunning sophisticated look. Equally important is the durability of rubber, such a flower bed can serve for several years, over time it will only need paint and clean up debris.

Separately, we can note the fact that the more the tire is worn, the easier it is to cut, bend and turn inside out. Thanks to this, work on creating a flower bed will proceed faster and easier.

Tire products are not subject to destruction and deformation due to temperature changes. Neither summer heat, nor very coldy will not be afraid of a flower bed of wheels.

Tire beds perform an important function - they protect the plants growing inside them. Tire coloring in bright hues will help protect plants from overheating in extreme heat. By the way, flowerbeds of their tires have been used in city courtyards for a very long time. It is thanks to them that it becomes possible to grow seedlings in adverse urban conditions.

Making a flower bed

Tire beds are used not only for planting small trees or bushes, but quite often tires are used to create flower beds. Conditionally such flower beds from automobile rubber can be divided into two types:

Flower beds from whole tires
Cut rubber flowerbeds

Whole

This option does not require much work. Simply wash the tire, clean it of dirt and other debris, and then install it in the right place. Having created a drainage gravel layer, soil is poured into the wheel and flowers are planted. Laying the first layer of gravel is a mandatory procedure for flower bed. If this is not done, then there is an increased risk of rotting of the roots of the plant from excessive moisture, which will be concentrated in the tire.

The installation of such flower beds in the country or in the yards is usually carried out in one plane or in several tiers. In the latter case, the wheels are selected different diameter and height, which allows you to play with the design. You can install high flower beds from below, and low ones from above, or use special stands for them. The coloring of tires is selected individually in accordance with the ideas and ideas of the owner of the site.

Split

Here you can give complete freedom your imagination and thought. Among this type of flower beds you can find many absolutely incredible design solutions decorating the yard or cottage. Tires with cut edges in the form of teeth or geometric shapes- These are the simplest options.

It will be much more difficult to make a flower garden in the form of a parrot or a beautiful rooster that has the appropriate coloring. However, this, if desired, can be built from tires with your own hands.

Pyramid Flower Garden

You can often meet craftsmen who build entire pyramids of their tires at their dacha. Making this is very simple, but you will need to find car tires of different diameters. After installing the pyramid and filling it with soil, the flowers are planted along these very protruding edges of the tires. Starting from 2-3 tires from the ground, you can plant ampelous plants in the remaining tires, which will gracefully hang down, beautifully complementing the overall picture. The coloring of such a flower bed can be any, but taking into account that the plants will hang and trail, the coloring of the lower tires can not be given much importance.

decoration

Old car tires are not very aesthetic appearance. Gray and tattered tire and beautiful flower- not the most the best combination. Therefore, special attention is paid to the coloring of tires.

Before as, start coloring the flower garden, one should decide on overall design and color scheme. The appearance of the flower bed will become brighter when using several shades that combine with each other. Instead of the usual monotonous coloring, you can add drawings, which can give the flower garden more personality.

For coloring car tires Suitable for the following colors:

Nitro paint
enamel
oily
Automotive

Before painting car tires, it is recommended to clean and prime the wheel. For a primer, you can use the composition GF-021, this will reduce paint consumption. Painting should be done only after the primer has completely dried. To increase the service life of the painted surface, you can add to the paint some pva glue. Paint an old car tire from all sides to prevent the appearance of black spots.

How to turn a tire

For some design decisions, it may be necessary to turn it inside out. This technique is usually used to create a flower bed that resembles a flower in shape.

Turning an old car tire inside out is a simple matter, but for the successful implementation of the plan, you will need not just a tire, but a wheel assembly with car drive. Directly on the disk, it is necessary to make the necessary cuts in the form of triangles, after which the petal by petal is bent into reverse side. In conclusion, you need to turn the rubber on the contrary with the help of a disk.

Fence from old car tires

Often this solution is used in summer cottages, where it is very important role economy plays. but appearance such a fence will look much more beautiful against the background of a profiled sheet or others building materials, standing out among them for its originality.

A fence made of car tires can be successfully combined with flower beds, which will give it more personality. The main advantages of this solution will be durability, low cost, availability and ease of installation.

One of the most simple options is the installation of a fence made of old tires half buried in the ground. The outer part of the tires can be whitewashed or painted in bright colors.

To build high fences, you will need a lot of automotive rubber. After necessary cleaning and tire processing are staggered up to desired height. Such fences consist of 10 - 12 rows of tires from cars middle class. Soil is filled inside the cavity of the tires, in which flowers or other plants can be planted.

Tire beds are decorated with many summer cottages. The desire to ennoble the cottage and create a beautiful corner where you can relax in comfort is quite natural. Most gardeners and gardeners prefer to arrange a variety of flower arrangements on the site. Due correct design containers for flowering plants, you can create interesting elements landscape design, which enliven the site and give it an original look.

many owners summer cottages they are trying to establish flowerbeds of tires in their possessions. This material, which usually ends up in a landfill, can be turned into a real work of art. With some skill, you can create beautiful flower beds with it quickly and very simply.

Of course, no one forbids purchasing factory-made flowerpots to decorate the site. But a do-it-yourself flowerbed of tires is more preferable for many, it acts not only as an element of landscape design, but also as a source of pride for the owners who make wonderful little things on their own.

To make flower beds from car tires with your own hands, you do not need to have any special skills. All it takes is a few of the most simple tools, as well as unusable tires anymore. Determine what the product will be, choose the place where it will look the best way and not disturb the composition that has developed on the site. It would be useful to make a sketch of the structure that you want to see on the site upon completion of the work.

If the area in need of arrangement is small, you can place a beautiful single figure from car tires on it, it can be a graceful swan or a bright parrot, a cute frog or a carriage from a fairy tale.

If you want to equip a large lawn, you will need large-sized installations. These can be flowerbeds of tires, arranged in several tiers, or voluminous vertical structures.

Do-it-yourself flowerbeds from tires can be made in the following forms:

ovals and circles;
multi-tiered structures;
high and low;
objects, figures, animals.

When the shape and location of the structures have already been determined, you should prepare the tools and materials that will be useful to you in your work. Tires, a sharp knife for cutting, any covering paints are needed. In addition to them, you may find it useful:

stones of different sizes (even decorative ones will do);
technical marble;
metal mesh;
remnants of any building materials.

The choice of tires for making a flower garden

If it is possible to choose between tires from imported and domestic manufacturers, it is better to choose the first of them. For imported tires, the rubber is softer and thinner, it is more convenient to work with it. Winter tires cutting lends itself better than summer.

To make a flower bed out of a tire, choose a material with as much tread wear as possible. Products with a worn layer are softer, turning inside out is more convenient.

Be sure to clean the tires if they have dirt, sand. It is much more pleasant to work with a cleaned product, and the blades cutting tools dull much more slowly.

Working moments

Before you make a bed of tires, decide what it will be. The easiest option for execution is to install a tire in the right place, paint it in the desired color and fill it in the “well” in the middle right amount earth. After that, flowers can be planted in it.

Another, slightly more complicated, option is to cut off the upper side surface of the rubber. The resulting product is filled with soil mixture. But if you want to get a more original flowerpot, bordered with a beautiful fringe or mounted on a leg, or arrange the product in the form of a large flower, a little more effort is required.

A step-by-step instruction for making a flower bed from tires will look like this:

1 Consider how the finished item will look like. It can be a bowl of a simple shape with smooth edges, large flowerpot, cut along a wavy line, a flower with a border of petals or fringe.
2 When developing the shape of the cut, be guided by the fact that the result should be a design that resembles a pan with a lid. It should have a deep bottom and a cut top. The cut outline around the entire circumference is drawn with chalk or a marker.
3 If you are going to cut petals along the edge of the cut, their size should not be more than 10-12 cm. Otherwise, when turning the material, it will not bend in the right places and flower beds with a round shape simply will not work. Lubricate the knife blade for easier cutting liquid soap. For curly sawing, it is recommended to use a jigsaw. After cutting along the drawn contour, make longitudinal cuts along the grooves of the tread.
4 To cope with cutting the steel cord, a grinder is used: with its help, cuts are made from the outside. All actions should be performed smoothly. The fact that the disc has come into contact with the cord can be guessed by the appearance of white smoke and plaque that forms on the surface of the product. Cuts should be made in increments of 15-20 cm.
5 Turn the tire inside out after cutting as follows. Turn it cut side down and place it on a flat surface. Place your foot on the part of the tire where the rim meets the tread. Now start turning the rubber from the middle outward, at an angle of 45 °. Try to make an effort to turn out at least a small part first. After that, the rest will turn out very easily.

After carrying out all the operations listed above, the flower garden is almost over. It is only necessary to correct the shape of the edges, if necessary, and arrange it in accordance with other elements of the landscape. It should be painted immediately, until the walls of a freshly made flowerpot have time to become covered with dust. You can use for this purpose oil or enamel paints, nitro paints. A layer of colorant applied to a clean, fat-free surface can last for a long time, perhaps even several seasons.

To decorate the flower garden, the remnants of car paints contained in aerosol cans. They can be sprayed on the walls of the made flower bed in just a few minutes. When painting, it is desirable not only to pay attention to the outer surface, but also to hook 10-15 cm of the inner edge.

You can complement the ornament by gluing small glass pebbles to it. They create an imitation of dew. But do not be too zealous: when planting climbing or creeping plants, the walls of flower beds will be closed.

Original installations in which annual or perennial flowers grow will help decorate and enliven any summer cottage.

For them, you will need to stock up on several tires of different sizes. They can be trimmed at the top to form rings, or used as they are. Perhaps, in your conditions, beds of tires resembling a well, with a small hole at the top, are more suitable.

You can assemble the following design from the wheels:

make a sketch of the future installation;
place the largest of the prepared tires on the ground;
pour a layer of crushed stone and sand on the bottom, on top - the right amount of fertile land;
next arrange the same design;
install a smaller tire on them in the middle, fill it in exactly the same way (the bottom can be covered with boards);
make as many tiers as you think you need;
in the gaps formed between the rings, plant flowering plants or berry bushes.

In conclusion, the wheels can be painted in the desired colors.

Flower garden in the form of a swan

A flower bed, original in appearance, can be created from tires, giving the image of a swan. In this case, the inner part should not be cut out - this will help maintain the shape.

Step back from the edge of the tread 3-4 cm and make cuts on both sides parallel to the existing circle. Dimensions - approximately 2/3 of the surface. At the same time, wings are obtained from the wide parts on the sides, and the neck of the bird is obtained from the narrow part in the middle. A piece is cut off from the middle part and a triangular head is formed at the end.

Now the cut tire must be turned out. Wings will turn out, if necessary, refine them by making cuts to simulate feathers. You can bend the wings the way you want, giving them any angle of inclination. At the end of the work, color the resulting figure in White color, leave to dry. Then place in desired area manor, fill the hole with earth and plant plants.

A flower garden hedge looks beautiful and unusual, which can also be made using tires painted in different colour. You will need to stock up on tires of different diameters. Those of them that are larger serve as flower beds, they are buried a little into the ground in the right places of the site. Those that are smaller act as a hedge, they are installed vertically, placed between those laid horizontally.

You can complicate the design a little, its appearance will only benefit from this. In those tires that are going to be installed vertically, a cross section is made. They shrug it off and thread two larger tires into the ring. The incision is directed down and fastened with staples or metal wire. Visually, it looks like a large rubber chain. All this is buried in the ground, then painted.

Quite simply and quickly, you can make flower beds from old tires in the form of tea cups. To build one cup, you need 2 tires different sizes. The larger of them must be hoisted on top of the smaller one and strengthened. For a larger tire, the top is cut off, it can be thrown away, or it can be installed as a base under the “cup”. Outwardly, it looks like a cup is standing on a saucer. On the side, attach a handle from a strip of rubber or tin.

In the “well” formed in the middle, earth is poured and flowers are planted. Choose a color for painting that is in harmony with the surrounding decor. Cups painted in bright colors and decorated with white polka dots will look simple and elegant.

worn out car tires can be called universal material, which allows you to embody many different ideas of garden decor. Creating a variety of crafts from wheels will decorate and enliven any corner of the garden plot.

Rubber needs to be replaced every 50-60 thousand kilometers. Worn tires can be taken to a collection point for a penny. And you can use it as a basis for creative experiments. The donut shape is perfect for creating a flower bed. If you connect your imagination, you can create stunning multi-level designs.

Where to get enough tires

For old tires, go to your neighbors in the garage cooperative or to the nearest tire shop. Unfortunately, suitable material can also be found in natural dumps in nature. Under natural conditions, rubber decomposes for more than 100 years! Take used tires back to work - this way you will make a feasible contribution to caring for the environment!

What tires are best for crafts

When choosing between domestic and imported rubber, give preference to the second. Foreign-made products are softer and easier to cut. Famous foreign brands: Michelin, Yokohama, Hankook.
Rubber designed for use in winter conditions, most often more pliable than summer. It is easy to cut and process.
The longer a tire has been used and the more worn it is, the thinner and softer it is. So, it will be easier to work with her. Sometimes you will have to not only cut, but also turn the rubber.

The tread pattern is almost worn out - it is not safe to ride on such tires, but they are ideal for creativity

What else do you need to work

Reliable, sharp knife.
Electric drill for drilling holes in rubber for the entry of a knife.
Sander or file.
Electric jigsaw.
Metal brush to remove dirt.
Chalk or marker for marking.
Primer, PVA, degreaser, machine oil for lubrication.
Rigid wire with a diameter of 5-6 mm, plastic clamps.
Roulette.

It is convenient to carry out work in gloves. Regular cotton items from the hardware store will do. Gloves will protect the skin of the hands from dirt, scratches, small cuts.

How to paint a tire

The choice of paint for rubber is an important and responsible decision. The appearance and service life of the finished object depends on the hiding power, brightness, durability of the coating. In principle, all automotive paints and street finishes are suitable.

Best Options:

Aerosols are highly penetrating. With their help, you can evenly paint over even the most hard-to-reach places. In order for the paint to be evenly distributed, the can must be kept at a distance of 30–40 cm from the surface to be painted. The drawing dries on average per day.
Universal rubber paints (For example, "Rezal +") are easy to mix. Polymerized in an hour (at room temperature), completely freeze and acquire maximum strength a day later. Subsequently, they are not afraid of exposure to moisture, sudden temperature changes.

It is convenient to apply liquid paints with a large brush, sponge. Permanent markers are useful for drawing thin lines.

The first step to creating a craft is preparing the material. Thoroughly clean the surface of dirt, and immediately before priming and painting - degrease.
An excellent knife for rubber - sharp, with a thin butt. How to check sharpening? Swipe the notebook paper over the blade. A well-sharpened knife will cut paper like a razor.
While cutting the tire, lubricate the knife blade with machine oil - the work will go easier and faster.
Before cutting out curly elements, do not be lazy to apply markup. Focusing on the eye or the tread pattern, you can bevel the line and ruin the part.
Before painting the tire, prime the surface. A primer with a small amount of PVA will increase the strength of the coating and reduce paint consumption. Quick-drying compounds harden in 6-7 hours, conventional solutions require 10-12 hours.

Want to unusual flower bed? decorative trim for tires can be found literally underfoot. For example, the surface can be pasted over with beautiful pebbles or smooth pebbles, cones, pieces of colored tiles or covers from plastic bottles. Small fragments are well glued to a primed surface, to Moment glue.

Tiered compositions

Imagine that tires are the details of the designer. And now come up with compositions from them: pyramids, turrets and other figures. To prevent the earth from waking up, geotextile inserts are laid at the bottom of the tires located on the upper tiers. Don't forget to make holes for draining water.

Photo gallery: multi-tiered flowerbeds from tires

For a flowerbed of tires, choose tenacious and unpretentious flowers: marigolds, phloxes, marigolds. Old textured rubber also has decorative properties. Head ladybug can be made from an old bucket or canister, antennae - from knitting needles Use tires of large and small sizes, with different tread patterns
Of three tires of the same diameter, a pair of boards and a piece roofing material you can make a well Your favorite cartoon can be a source of inspiration

If the appearance of the tires is not to your liking, they can be trimmed with stones.

Stones are fixed on the concrete mix

Smooth sea pebbles are also well suited for decoration.

The handle can be made from a separate piece of tire

Tires can be cut into different parts. Then the “assembly of the constructor” becomes even more exciting.

Photo gallery: prefabricated flowerbeds from tires

The flower bed is made in the form of an oval. To create a flower bed, it is enough to cut three tires in half. Details can be fixed with building brackets.

Tire flower bed

Chamomile from a tire is and independent model, and the base part of many designs. Flower beds can be arranged in a row, decorate the approach to the house or a recreation area.

1. Mark the rubber.

The lines go from thick to thick

2. Before cutting the tire, you need to make sure that there are no metal cords inside. They are not found in ordinary passenger car tires, but may be present in truck tires.

Petals can be triangular, semicircular, square

3. Cut off the side from the opposite side.

We make transverse cuts before the beginning of the tread, every 20 - 25 cm

4. We turn the part inside out.

Inside the product, you can make the bottom of the geotextile

5. It remains to paint the flower bed!

A flower bed can be placed on a "pedestal"

Photo gallery: compositions based on the basic "flower bed" scheme

The flower is assembled from two tires, the lower petals are fixed with the help of building brackets Two tires were used for the construction, one was cut along a zigzag line The turtle's head is molded from a plaster mixture on a wire frame

Flowerbed-bowl from a tire with a disk

1. We mark a zigzag cut line along the entire frontal circumference of the tire.

Thanks to the triangular petals, the flowerpot will look like a big flower.

2. We begin to cut the part along the contour.

Don't forget to sharpen your knife well before use!

3. Check if there are any uncut sections left. And we “turn out” the workpiece slowly, in parts.

Work is more convenient to do together with an assistant

4. If there is a chamber in the wheel, it must be carefully cut out.

We remove everything superfluous, we definitely won’t need a tire for a flower bed

5. The bowl is ready!