Interior doors what color to paint. Do-it-yourself interior door painting

The house is planned to be renovated and the question arises whether to buy new doors or restore and update the old ones. How to paint a wooden door so that it looks like new? If you are in the mood for drastic changes, then it makes sense to buy new door. But it is necessary to take into account that the room looks harmonious, you will have to change all the interior doors. Painting wooden doors requires some investment. But you can try to return the former attractiveness to the old door leafs, if you have the desire, time and certain skills. So, how to repaint interior doors.

Range paintwork materials allows you to transform any door. The main types of wooden canvases:

Solid wood door. Solid wood, consists of tightly fitted and glued boards (shields), that's why they are called panel board, also the solid wood can be bleached.

The frame-bearing part is made of wood, and multilayer plywood or fiberboard is inserted between the bases. Such doors are called panel doors. They are visually different in that the wooden parts are thicker, and the inserts are thinner and look like blind windows.

Veneered doors. The frame part is made of wooden planks or MDF. MDF board is wood shavings, crushed almost to the dispersion composition and compressed in a vacuum way. Under the influence of vacuum pressure, adhesive resins are released from the chips. It turns out a dense plate. In fact, this is also a tree, but made from waste from processing the array. On top of the plate is covered with a layer of veneer (a thin cut of wood).

Cloths from fiberboard. Fibreboard is wood shavings glued together using hot pressing. From above, the plate is covered with a thin layer of polymer film.

Therefore, before painting interior doors, it is necessary to take into account the characteristics of the material. So painting old paneled doors is somewhat more difficult than from an array.

Types of paintwork

Painting interior doors requires certain stages of preparation and understanding of the types coatings. Manufacturers offer a fairly wide range of paintwork for wood and its derivatives. In general, they can be divided into: wood paints, various varnishes and coatings, impregnations, tinting agents.

Paints on wood

How to decide how to paint interior wooden doors. It is necessary to get acquainted with the main types of means for coloring. It is important to consider the following factors:

What is the array made of?
whether these surfaces were previously covered;
is there in the room high humidity air and temperature changes;
operational loads, that is, how often the doors will be subjected to mechanical stress. For example, you cannot compare the load of canvases that are in the kitchen or in the bathroom in small apartment, with doors to a bedroom in a large house.

Related article: How to update an old table with painting?

On the video: acrylate paint for doors.

Based on the above, we choose how to paint wooden doors.

The main properties of paints for wood

paint interior door it is possible only after deciding what paint to paint, what color, how to paint the door. The natural array can be covered with a transparent varnish or tinting agents, in order to preserve the natural texture of the wood.

Wood paints:

Quick-drying is nitro enamel obtained as a result of chemical action on cellulose nitrate with nitric acid. It lays well on the surface, creating an even layer, dries within half an hour. The main disadvantage is a rather pungent odor and toxicity. Therefore, this type of coating should be used, if possible, in a well-ventilated isolated room. It is better to process the canvas in the open air.

Based on alkyd varnish or resins, they produce alkyd enamels. The composition includes various additives, solvents. Alkyd resins form a moisture-resistant film, so it can be used for wet rooms, exterior door panels.

Acrylic paints are the most harmless, have almost no characteristic odor. They include polymers (polyacrylates, copolymers) mixed with a water-dispersion solution. They mix well with various pigments. Thanks to this, you can achieve any color and shade. The copolymers form, after drying, a film that protects the surface.

Previously, oil paints were often used, but now they are giving way to the above-mentioned paintwork. Nitro enamel and alkyd coatings penetrate deeper into the layers of wood, resistant to aggressive external influence, moisture. Have a wide color scheme. Therefore, it is fashionable to use them for bathrooms, kitchens, exterior doors.

Acrylic paint is often used to cover interior doors. To enhance the protective and aesthetic properties, you can walk on top with a layer of varnish.

Varnishes and tints

For wooden doors made of natural solid wood, in order to preserve the natural beauty of the wood structure, various varnishes, tinting stains and wax impregnations are used. Stains deeply impregnate the wood and give it a certain shade, while maintaining the structure. Transparent varnishes perform a protective and aesthetic function. Perfectly emphasize natural beauty natural wood.

Related article: Log house self-painting technology

On the video: how to cover the tree.

Door painting

How to paint doors? First you need to decide how to paint a wooden door, what color it will be. An important role is played by the interior of the room, in what conditions the canvas will be used. For example, white canvases are suitable for interiors in light colors. Dark, brown make accents. They must match the color of the floor, stretch ceiling, furniture.

But how to repaint wooden canvases so that they become snow-white. To do this, use a white primer as the basis. To repaint the doors, you must adhere to a certain technology.

How beautiful to paint interior doors? To begin with, the canvas must be removed from the hinges and laid on stands. For these purposes, stools are most often used. painted door, which is planted on non-removable hinges and cannot be dismantled, must be fixed. Door locks, handle, latches must be removed or sealed with masking tape.

Prepare as follows:

First, remove the remnants of the old paint. For these purposes, use a building hair dryer or a regular blowtorch. The old paint on the wooden door is starting to bubble and peel off. Clean the surface with a metal spatula.
Then the surface is cleaned with a coarse-grained sandpaper. You can use a grinder or grinder with special nozzles.
The canvas is primed with a special primer for wood. Close up cracks, smooth out irregularities. If they paint the door White color, then it is better to use a white or colorless primer.
Allow primer to fully absorb and dry. Then they are cleaned with fine-grained sandpaper or attachments for a grinder.

This must be done before painting interior doors.

What and how to paint a wooden door? coloring door leaf using a paint brush, roller or spray gun.

Painting should be done in a well-ventilated area or outdoors if it is possible to dismantle it.

array

How beautiful to paint interior doors::

The surface is cleaned of traces of dust, after cleaning it is primed.
Apply painter's tape to areas that do not need to be painted.
It is better to paint with a roller. The places around the castle, handles are carefully painted over with a brush. Apply paint in 2 layers. The second is covered when the first dries.
Masking tape must be removed after the second staining, until the paint has dried.

In order for the layers to lay evenly, it is necessary to apply the second layer in the opposite direction relative to the first.

Paneled doors

These canvases are best painted with a brush and roller. To paint wooden doors, you must follow the following sequence:

First, with a brush, paint over convex and uneven places.
The whole canvas is covered with a roller using a coloring composition. Allow to dry, then apply a second layer.
When using one paint brush, each layer is painted over in the opposite direction relative to the previous one.
The painted door is left to dry completely, then installed in place.

It is not difficult to paint an interior door or entrance door with your own hands. The question is, how much is enough? By following our recommendations, you can paint a wooden door with high quality and reliability, and most importantly, for centuries!

First of all, think about where you will paint your wooden door: if the door is an interior door, a persistent smell of paint in the apartment is provided for you, if the door is an entrance door, the smell of paint in the entrance will “please” all the neighbors for several days.

Do-it-yourself painting is desirable in the workshop or on the street.

You can paint wooden doors at home

We select paint for a wooden door

Before you go to the store, you ask yourself: what kind of paint to choose? And you are quite logical, choosing a paint for natural wood is not so easy.

The paint will determine the color of the door, its design, the smell in the house for the coming weeks, and worse, it can cause allergic reactions.

Door paint should be chosen very carefully

By consistency, all paints are conditionally divided:

Transparent. The paints contain special pigments in their structure, which allow preserving the natural structure of the tree after application.
Such paints include tinted varnishes, oil impregnations, stains, and other paints that give a new fresh color to wood.
Opaque. Paints contain organic solvents.
Such paints include opaque enamels, acrylic paints, polyurethane, alkyd and oil-based paints.

The most widely used alkyd enamel due to its affordable cost, a wide variety of colors and durability.

Painting wooden surfaces

water-based acrylic paints: have an optimal consistency, excellent vagueness;
alkyd paints: they have high water-repellent characteristics, are not exposed to temperature changes, dry quickly.

For painting entrance and interior doors, the second option is best suited - alkyd paints. Their technical characteristics allow you to maintain the appearance of a wooden door for many years.

Wooden door before painting

Preparatory work before painting

Experts believe that it is impossible to fully take into account the entire technology of painting a door if it is painted in an upright position. Leaks are definitely unavoidable. Therefore, before painting, remove the door.

For more convenient do-it-yourself painting, place the door on a paint table or homemade stools.

Painting a wooden door requires thorough pre-cleaning of the door leaf.
If there are patches of old paint on the door that are already peeling off, or rotten parts, they need to be removed. Then putty all the bumps and cracks on the door.

When the putty hardens, the door needs to be sanded. Use sandpaper. Wipe the door well with a damp cloth from dust and particles of dried putty.

Before you start painting the doors, you need to carry out preparatory work

For greater certainty, vacuum the door and wipe again with a damp cloth. The wooden door is ready for painting. Prepare the paint: if it is too thick, add thinner. Painting an entrance or interior door can be done with a roller and brush, or you can use a sprayer. A new brush must be rubbed before use so that it does not leave lint behind. Prepare a bath for the roller. These tools will help you achieve very neat but long lasting work.

Using a sprayer, you will reduce the time, but there is a chance that the paint will get on the metal hinges. Which negatively affects the functionality of the door. Therefore, professionals recommend removing fittings in advance.

Wood door color options

The technology of painting wooden doors is absolutely simple, but at the same time diverse. There are several painting options, but each of them requires the preparation of the door with a primer, putty, impregnation, etc.

First, check that you have all the tools. You will need:

paint table or 2-4 stools;
roller with a bath or spray;
putty knife;
wet rag;
sandpaper;
dye;
masking tape;
putty;
primer;
solvent;
good lighting.

Wooden doors before painting

Method number 1: for painting the entrance or interior door, use paints based on natural oils. Paints with a high percentage of dry residue will help to get a clearer and more natural color of the door.

If you are painting at home, you will need to apply the paint to a large section of the door and work it through several times with a rubber trowel, about 14 times. Experts recommend wiping the spatula after each use.

Such paints are also allowed to be applied with a foam rubber sponge. Dip the sponge into the paint and run along the fibers along the door. Longitudinal movements must be repeated for three minutes.

Method number 2: to paint the door, you need the same tinting composition, only with most of the dry residue. Use only high-quality compositions from natural oils.

This method involves the use of a foam sponge. Dip the sponge into the paint and rub it over the entire surface of the wooden sheet. Then press the sponge against the door and continue to drive along the grain of the wood for several minutes (2 or 3 minutes).

Method number 3: prepare two types of paint and liquid soap. First paint the door with one paint, wait until it dries. Then apply liquid soap to the door and rub well over the entire canvas.

Soap does not need to be washed off, just wait until it is completely dry. Apply the next coat of paint to the door leaf.

Method number 4: prepare two types of paint and yacht varnish. Apply a coat of paint to the wooden door. Once the paint is dry, apply a layer of yacht varnish. After the final drying of the varnish, paint the door with the next paint.

Painting can give your doors new life.

After you have completed all the preparatory work, you can start painting. If you used putty, the door needs to be primed.

First of all, paint over all the corners and hard-to-reach places with a brush. Paint large areas of the door leaf with a roller. It will guarantee a uniform layer of paint and will not leave lint behind.

After the paint has dried, the door must be sanded. Wipe the door with a damp sponge from dust. On top of the primer, apply a coat of the paint you have chosen for your front or interior wooden door.

Attention: the primer must be chosen a few tones lighter so that it does not affect the final result.

Now all you have to do is return your wooden door to its hinges and insert all the hardware. The entrance or interior door can be finished with your own hands quite simply. Following the instructions and advice of experts, you can easily apply paint or varnish to the canvas. And having received such an indispensable experience, you can easily update all the wooden furniture in the house!

In what color to paint interior doors, many people think at the time of the start of the repair. After all, the entire interior should be harmonious. And as well as how to paint interior doors, we will consider today.

In this matter, it is important to initially determine their appearance. After all, there are many options for finishing, and the photo and video in this article will help with this.

There are many different compositions for painting wooden surfaces (see Which paint is better to paint a tree: making a choice). First of all, it is necessary to determine what paint to paint the interior doors with. After all, it is different in its composition and characteristics.

It can also be a dense saturated layer. But if you wish, you can apply a coating with a thin transparent layer and simply emphasize the structure of the wood. Everything can be done with your own hands and the final price will not scare you.

How to paint doors

For creating good coverage you need to choose the composition, and it already depends on you personally.

In this question, you need to understand what kind of coverage you want to see:

Creates a dense, opaque coating. These are thick enamels and paints with a base of liquid acrylic, polyurethane, perchlorovinyl. Also, this group includes quite rare, outdated oil-based formulations.
Toning compositions. These are various impregnations that penetrate deep into the layers of wood, and not only give it a certain shade, but also protect it from destructive external influences.
Transparent coatings. These are a variety of varnishes, both glossy and matte, which cover the surface of the wood with a transparent layer that protects the wood from moisture.

For home use professional painters recommend using easy-to-apply formulations, such as:

Acrylic dyes for water based. They have the best consistency for brushing, good adhesion and excellent covering power. Acrylic paints are only slightly inferior oil paints by its surface flow, which is another advantage of these coatings.
Alkyd-based paints and varnishes. They dry quickly, are not affected by temperature fluctuations, and repel liquids well, protecting the wood surface.

Attention: The second option (alkyd paints and varnishes) is best suited for painting bath and kitchen doors.

Due to the high protective properties of these compounds, wood will last much longer and will remain in at its best. In addition to entrance doors, alkyd dyes can be used to paint interior doors in interior spaces.

It should be noted that for better adhesion all paints based on alkyd resin apply only to a carefully wiped surface. If this condition is not met, upper layer The paint will blister and eventually peel off.

Staining a wooden door is done in several steps:

Very often, several formulations are used. First of all, the door is cleaned of old paint (see How to wash off the paint without problems), then coated with a primer. Sometimes you have to prime again if the first layer lay unevenly.
Then the door leaf is painted. If it is possible to remove the door from the hinges, it is painted in a vertical state. If the door remains in place, then the staining starts from the top. Large even panels are covered with paint using a roller (see), small details are treated with a brush.
In order for the coating to lay down evenly, the layers are dried and the result is evaluated. If necessary, staining is repeated so that the paint lies evenly. Too thick layers of wet paint should be avoided, as they slide down, spoiling appearance surfaces.

door painting steps

In addition to the door itself, it is usually necessary to paint the jamb, door butt and hinges. In order to evenly cover all the details with paint, it is better to remove the door from its hinges. After that, all the details of the door frame are painted, and dried for the required time.

The door leaf can be covered with paint in two ways:

The door leaf is removed and taken out into the open air, where it is painted. Work on painting the interior surfaces of the room must be carried out in summer period to allow for ventilation.
The door leaf is not removed, but lifted with wedges, moved away from the jamb so that all the elements can be reached with a thin brush.

When the work is completed, the wedges do not need to be removed, otherwise the inner edges of the door will come into contact with the door butt, the paint will smear.

It is not always possible to remove the door. Sometimes there are designs with non-removable hinges, handles, door locks. If they cannot be dismantled, then they can be carefully pasted over with paper tape.

Wood surface preparation

The wooden surface must be carefully prepared before painting. It will take some diligence and accuracy to achieve a good result.

Cleaning a wooden surface is carried out in several stages:

The first stage is the complete removal of the paint. Nothing from the previous coating should remain on the surface. In order to make the paint easier to remove, the surface is coated with a special compound that reduces adhesion between it and the wood surface. Residues are removed with a spatula and sandpaper.
Another way to remove paint is to use a sander. When using it, you must follow all safety rules, and wear a protective face mask. On work surface machines set sandpaper with a large grain.

Heating also allows you to effectively remove the paint. The surface of the door leaf is heated building hair dryer. When bubbles appear, they are opened, and the paint is removed layer by layer from the surface to be cleaned.

The second stage is grinding. This processing method allows you to remove small scratches, abrasions, as well as pieces of paint. You can grind in different ways, manually or with sandpaper.
The third stage is putty (see Wood putty: how to do it wisely). It is necessary to choose a special composition for wood, which has a fine-grained structure. If the door is covered with a transparent composition, it is necessary to select the putty to match the surface, or paint it with special dyes. During processing, close attention should be paid to all small scratches and surface damage, especially in hard-to-reach places.
The fourth stage is the final polishing. It allows you to bring the surface "to zero", perfectly aligning it and all the details of the decor, if they are present on the surface of the door. It must be remembered that the last grinding is done very delicately, using fine-grained sandpaper. After all work is done, the surface is thoroughly wiped from dust and working debris with a dry rag.

Caution: If the dents are too deep, regular putty may not adhere well. It can be replaced with automotive, without fiberglass.

Old darkened solid wood, under a dense layer of paint or varnish, is easy to lighten. Requires chlorine bleach, diluted in water in a ratio of 1:3.

Coloring without applying various effects

The purchase of materials directly depends on the number of doors that need to be painted. If there are less than two of them, it is unprofitable to buy a spray gun, you can get by with an ordinary panel brush.

For large flat canvases without decorative elements it is better to take a roller. The brush must be well fluffed before painting so that poorly fixed hairs can fall out before painting.

The type of door determines the method of painting:

Painting the panel door will take a little time. It is painted in three steps. Since it has a flat surface, a roller is needed. The coating is first applied from all ends, then the entire canvas is painted over, starting from the upper left corner, and the movement is directed to the side. The next layer is applied at right angles to the first, the finishing layer is the same as at the beginning.
Doors with a complex surface are painted only with a brush. All protruding elements, recesses, wood carvings and patterns are painted over, then even surfaces on which you can pass with a roller.

How to stain doors

Before staining with a stain, the door is moistened, so the wood increases its adhesion, and the coating is better absorbed and lays down evenly.

All horizontal surfaces are stained along the fibers, then across, and for the last time - again along the fiber.
shoals, door frame and the canvas is covered with transparent stain or varnish from the bottom up, and with opaque compositions from top to bottom.
After treating the wood with a water-based stain, the wood fibers straighten out, and in order to level the surface, they must be leveled with sandpaper-zero. Then the surface is wiped with a dry cloth, and covered with stain again.

Attention: The color of the surface after drying is much lighter than that of a freshly painted door. A darker color can be achieved by repeatedly covering the surface with stain.

To avoid the final sanding step, you should choose an alcohol-based stain.

Create an imitation of wood

On almost any surface, you can create an imitation of wood fibers.

For this you need:

Wood canvas is painted with light paint of natural shades;
Then the dried surface is covered liquid soap with a brush;
The darker paint is applied on top of the soap, then the soap is washed off with water.

At home, you can create an imitation of a veneered door even on the surface of a plywood door. To implement this method, you will need a special brush sold in hardware stores.

It is necessary to “comb” the surface of the door leaf with its metal fibers, so that visible shallow grooves appear on it.
The surface is stained with contrast dyes. After drying, patterns characteristic of natural wood appear on the surface.

Now you know how to repaint interior doors. And following the basic rules, you can learn to paint and decorate any wooden surfaces. It won't be too difficult.

Having practiced on the doors, in the future it will be possible to restore more complex interior items - cabinets, tables and sideboards. Instructions for painting and finishing all types of doors are on our website.

03.09.2016 112157

Each theater begins with a hanger, and the interior of any room begins with a door that sets the mood and makes a significant contribution to the atmosphere of the interior and is an important element of the zoning of the room.

Many people underestimate the need for renovation, focusing on the choice of wallpaper, floor covering and furniture. As a result, an unpleasant contrast is created between the brand new room and the old door that has lost its appearance. But this can be avoided if you paint it yourself. Given that correct selection paint and adherence to staining technology, the result will be excellent, which will allow you to create a holistic harmonious interior and at the same time significantly save money.

What paint to choose?

There is such paint for interior doors:

alkyd enamels;
acrylic enamels;
nitro paint.

Alkyd enamels are inexpensive, while creating a resistant, smooth, durable coating on the surface. However, such paints have one significant drawback: when stained, bad smell, which will disappear only after the enamel layer dries, and this takes a couple of days. Therefore, alkyd enamels are used only for well-ventilated rooms or if there are no small children and people with allergies in the apartment.
The ideal choice for painting would be acrylic enamel, which dries quickly and does not emit bad smell. After staining, it may be necessary to apply an additional varnish layer to protect the canvas from moisture and to create a pleasant glossy effect.
Nitro paint creates a great, even finish and dries within minutes, but releases into the air toxic substances. Therefore, when using it, children, pregnant women and allergy sufferers are removed from the room where the painted interior days are located.
In addition, such paint is not suitable for painting a veneered door, since under its influence the veneer becomes covered with hard-to-remove stains.
As for the shade of paint, it should be chosen depending on color solution interior and personal taste preferences. You can choose the color of interior doors in accordance with the shade of the wallpaper, individual elements room decor or flooring. White will be a neutral and discreet option. Light beige, brown of various shades, the color "under the tree" is considered a classic. Extravagant colors - red, green, blue and other harsh tonality create the effect of tension and visually disturb the peace of the home.

Selection of paint depending on the material

When choosing a paint, you should consider what material the door is made of.
Painting a wooden canvas or chipboard is carried out with any paint.
If the door is made of, it is somewhat more difficult to paint it, since it is difficult to maintain the structure of the veneer. Therefore, it is desirable to have a varnish that matches the shade or paint with paints that include varnish, although ordinary acrylic water-based paint is also suitable.
It is easy to update the laminated surface. It creates excellent adhesion with any coloring composition.

Preparation for staining

Before proceeding to staining, remove. In the event that you only need to slightly update the paint layer, this is not necessary.
Painting doors in the apartment begins with the preparation of the workplace. The door removed from the hinges is laid horizontally on suitable supports at a height of at least 50 cm from the floor. Ordinary stools are successfully used as supports, on which boards the width of a door leaf are placed. The supports must be covered with a non-slip, lint-free dense cloth. The door is processed first on one side, then turned over to the other.
The first stage of work is the removal of a layer of old paint. For convenience, all fittings (handles, hinges, etc.) are first removed, and a small amount of cotton wool or rags is placed in the holes.
To remove a layer of old paint, use a solvent, a stiff metal brush or sandpaper.

After removing the paint, the surface of the interior door is leveled, the cracks are sealed with putty, and the surface is polished. grinder or fine-grained sandpaper and apply a layer of primer. The primer is prepared from the same paint, which will then be painted on the main background. For its preparation, the finished paint is diluted with a solvent in a ratio of 1: 3. The resulting composition primed the canvas in 1 layer. If necessary, after priming, putty again partially or completely.
All of the above applies to interior doors made of wood. When preparing for painting doors made of other materials, you need to remember some important points:

it is enough to remove the top layer of varnish from the veneer door. If only a slight update of the gloss is required, then the paint is applied over the previous coating;
only the top layer of wax dirt-repellent impregnation is removed from the laminate web;
doors made of MDF and chipboard are prepared for painting in the same way as wooden ones.

Painting

When the remnants of the old paint are removed from the door, and its surface is prepared for applying a new one, they begin to paint.
To paint a wooden door in an apartment, it is most convenient to use a roller, and to work out small parts and protrusions - with a small brush. It is convenient to use a special spray gun for applying paint. This is especially true in the case of painting MDF doors.
Before applying the paint, it is recommended to filter it thoroughly: this way the coating will be more dense and uniform.

Important! The door leaf is painted only in one direction! You can not put layers of paint towards each other. During operation, avoid direct sunlight on the door leaf. The room must be protected from dust and midges, which, sticking to fresh paint, will ruin the job.

If there is a desire to varnish the surface, be sure to wait until the paint layer has completely dried. This process takes a day for acrylic paints and two or three days for alkyd enamels.

Ideas for coloring

You can limit yourself to the color that matches the interior of the room, but why not show your imagination and turn the interior door into an interesting interior detail?
To give the door a more decorative look, it is recommended to use several tricks:

stencil application. In this case, the door is covered with a background layer of paint, after which, with the help of a stencil, an even, neat pattern is applied,
using multiple colors. In this case, you can create interesting patterns in the form of stripes, squares or rectangles. To create an even pattern, you will need a special masking tape, with which areas of the required shape are highlighted on a dried layer of background paint.
artistic painting. This option is only suitable for those who have certain skills in the field of drawing. Artistic acrylic paints and thin synthetic brushes are used to create the painting. At the same time, fairy tales are suitable for the door to the nursery, and floral ornaments for the bedroom or hall,
creating a textured surface. To make doors interesting decorative look it is recommended to use a special hard roller or brush, which works through a layer of recently applied paint. In addition, special paints are sold that, after drying, create a textured surface.

Having shown diligence, you will receive a real work of art.

As you can see, painting interior doors with your own hands is not so difficult. To achieve an excellent result, you need to be patient, take your time during work and use high-quality materials.

Interior doors for painting initially come in white. The surface of the sash is covered with a primer, which the owner paints in his favorite color. The old canvas can be similarly restored, but the method will depend on the material of manufacture.

Can interior doors be painted?

Any door that has served for several years loses its attractive appearance over time. Scratches, scuffs, paint fade appear on the surface. Sometimes a situation arises when, during the repair, the style of the room completely changes and the door block simply does not fit into it. In order not to make an expensive purchase, the sash is given new life with paint. The design will look no worse than new, if you follow the technology, choose the right paint and varnish material.

Features of painting interior doors with your own hands

The interior door block is made of different material. Depending on this nuance, the features of preparation, choice of tool, paintwork and painting itself will depend. IN in general terms adhere to the following plan:

The sash of the interior door block is removed from the hinges, laid horizontally. Remove the hardware from the canvas. If the lock is difficult to remove, it is sealed with tape.
The brush is soaked before work for at least an hour. A little trick helps prevent the bristles from falling out and sticking to the painted surface.
If the surface of the canvas is smooth without patterns, bulges and recesses, it is more profitable to prepare a roller for applying paint.
At the paneled door, recesses are first painted with a narrow brush. Paint is gaining a little so that it does not flow into the corners.
folding interior canvas"Accordion" is painted with a spray can or spray gun. Slots with reverse side the sashes are sealed with tape so that the paint under pressure does not fly out to the other side of the door.

When the work plan is built, paint is poured into the pallet, and the procedure begins.

Advice! After staining, the adhesive tape must be removed immediately, otherwise the sticky layer will eat into old paint and shoot with her.

On the video, the correct painting of the door:

Painting interior doors of a hidden type

The complexity of painting hidden doors is the impossibility of removing them from the loops. Interior sashes are installed together with the box. For coloring, the surface of the canvas is isolated, the remaining structural elements are covered with adhesive tape, film. The paint is applied with a roller. Moreover, paintwork materials use quick-drying to eliminate the likelihood of streaks.

What color to paint interior doors

To beautifully paint interior doors, it is not enough to look at photo examples. It is necessary to choose the right LCM. Varnishes are ideal for a new canvas. There should be no mechanical damage on the old door. In addition, it will have to be carefully prepared.

By gloss varnishes are:

matte;
glossy;
semi-gloss.

Color Differences:

transparent;
colored.

If we talk about colored varnishes, then they are similarly transparent, but have a certain shade. Hide mechanical damage such LMB will not succeed. The varnish can be applied over the paint, but they must be combined in composition.

Advice! Glossy varnish is applied only with an airbrush. From a brush and a roller, it will not be possible to achieve a gloss effect.

The best option is odorless, quick-drying paint for interior doors, as it allows you to hide minor mechanical defects. The lack of transparency effect allows you to apply bright hues on a dark surface.

Among the variety of varnishes for painting the interior door block, they use:

Oil varnishes are made from drying oil and a hardener. The advantage is environmental safety, but they dry out for at least three days.
Alkyd varnishes are made from resins and organic solvents. The advantage is improved performance. However, drying takes a long time, solvents emit an unpleasant pungent odor.
It is better not to use nitro-varnishes at home. Their advantage is only instant drying and shine. However, the surface will not shine for long, as varnishes disappear from UV rays. In addition, the toxic odor is hazardous to human health.
"Yacht" varnishes are best used for front door. The urethane-alkyd composition is resistant to fading, moisture, and mechanical stress.
Polyurethane varnishes considered great alternative"yacht" coatings. The compositions have similar characteristics, only the price is lower.
Acrylic varnishes are water based. This perfect choice for interior doors. LKM is environmentally friendly. The cured film is breathable. There is no unpleasant odor during operation.

If you choose paint for interior doors, then the variety is smaller, but the characteristics are similar:

Oil paints for modern interior door blocks are not used. LKM is suitable for painting an old sash in a pantry or other non-residential premises.
Alkyd enamels are well suited for wooden door blocks. The advantage is low cost, resistance to moisture. The disadvantage is long drying up to three days, a toxic pungent odor.
The best is considered acrylic paint for interior doors due to the absence of a toxic odor. LKM dries quickly, looks attractive, is resistant to fire.

To achieve an attractive effect, the interior door block can be painted first with paint, and after drying, varnished. However, both materials must match in composition.

Advice! lovers natural materials varnishes and paints can be replaced with special impregnations. They usually include paraffin, wax, flax oil, rosin. Solvents are turpentine or gasoline.

How to paint interior doors

At the request of the owner, interior doors can be repainted in white, blue, green or any other color. It all depends on personal preferences and the chosen paint. Preparatory activities and the process itself will depend on the material of manufacture of the sash.

If you want to give the canvas a truly attractive look, you can try to paint it under a tree. The essence of the process is the application of two layers of paintwork materials different color, creating a faded effect.

If oak imitation is supposed, wood-like paint for interior doors is taken chocolate and Brown with a light tint. If you want to imitate wenge, you will need paintwork in black and dark red.

Painting process:

apply with a brush or roller paintwork, which sets the main tone, give time to harden;
sandpaper in places make abrasions;
apply the second final coat of paint, draw stains with a comb.

The sash of the interior door block can be left as is or the effect of aging can be added. In the second version, the canvas is coated with craquelure varnish.

How to paint interior doors made of fiberboard

A feature of fiberboard is the porosity of the material. To reduce the intensity of paint absorption, the surface of the interior door is first primed. It is optimal to use drying oil heated to a temperature of + 50 ° C.

Painting process:

The sash is removed from the hinges, laid horizontally, and the fittings are removed. The surface of the door is wiped from dust with a rag moistened with alcohol.
Fiberboard is covered with two layers of drying oil. You can use special store primers.
Mechanical damage putty. After the putty has dried, fine-grained sandpaper is passed over the surface of the door.

After going through all the stages of preparation, interior doors are painted with alkyd or acrylic paint. If the door is sheathed with waterproof fiberboard, then water-based coatings cannot be used. The surface will reject the paint.

How to paint veneer interior doors

The preparatory stage consists of similar actions: removing the interior door from the hinges, dismantling the fittings, laying on a horizontal surface. The further procedure before painting is fraught with many difficulties. Veneer is considered a capricious material. If painting will take place in another room, then the door must be brought there at least a week before the start of work. The veneer needs to get used to the temperature and humidity.

An important step in preparing for painting is a thorough inspection of the surface of the interior door, which allows you to identify scratches, abrasions. Sometimes it is possible to restore the shine with wax polish or furniture varnishes, if the defects are practically not noticeable. Full painting is needed when scratches and scuffs are clearly visible from a distance of 50 cm.

To paint interior veneered doors with a large defect, first clean off the old varnish with fine-grained sandpaper. You can use special solvents to remove old layers of paint.

Attention! Veneer is a very thin material. It can only be sanded by hand. Grinders are able to select recesses if they accidentally linger during grinding in one place.

When the surface of the interior door is prepared, proceed to painting it in a horizontal position. Deep scratches, holes close up with a primer. After drying, the areas are rubbed with sandpaper. Varnishes are chosen on a water basis or special formulations for painting veneer. If the surface is free of defects, it is best to use transparent paintwork materials that allow you to preserve the natural pattern. To hide large defects, colored varnishes are used. For a special decoration, the veneer is stained with varnish before painting.

Attention! Painting of veneer with nitro paint is not allowed. Matte spots will appear on the surface of the door.

How to paint MDF interior doors

If the interior door is made of MDF, it is better to choose acrylic paint. The process requires the following steps:

The door is removed from the hinges, the fittings are dismantled, laid on a horizontal surface. sandpaper or solvents remove the old paintwork. Shallow scratches are rubbed with fine-grained sandpaper.
The entire interior door block is treated with a solvent to MDF is better paint was applied.
Painting MDF is done in three layers, giving each one time to dry.

For interior door block standard sizes it takes about 1 kg of acrylic paint.

How to paint paneled interior doors

The process of preparing for painting a paneled sash is similar previous options. The staining itself is different, which can be done in two ways:

If paint is selected, then the ends of the sash are first painted. Damaged areas are sanded on the panel, a primer is applied. When the primer is dry, paint the entire door in two layers. When a varnish or stain is chosen for an interior paneled door, the painting process is carried out strictly according to the instructions of the paintwork manufacturer, displayed on the package.
The second method of painting is based on tinting the sash. The technology is suitable for panels with a wood texture.

The paneled door has many bulges and depressions. For painting, high-quality brushes that do not spill bristles are better suited.

How to paint wooden interior doors

The door block from the array looks impressive if you keep the natural texture of the wood. It is optimal to open a new sash without damage with 2-3 layers of varnish. If desired, the stain creates the effect of aging. When painting an old canvas with defects, paints are used. The color is optimally matched to the tree.

The prep process for painting an old door starts with removing all the layers down to bare wood. Here you can use a grinder, solvents for washing off dry paint. After grinding, putty defects that could not be eliminated. Under the paint, the choice of putty color is unimportant. When interior wooden doors are being prepared for painting with varnish, the color of the putty is selected to match the shade of the wood. The final step is another polishing.

The canvas with patterns is painted with brushes. The painting tool is selected of high quality so that the bristles do not fall out. The shield door is painted with a roller in three layers, and each of them should lie in the opposite direction.

Simple at first glance, the painting process is fraught with many nuances. Knowing them, it will be possible to achieve the most positive result. To help the masters, here are some useful recommendations:

If it is possible to remove the canvas from the hinges, then it is better to dismantle it. WITH horizontal surface easier to work with, paint does not flow from it.
The first step is to carefully inspect the entire door block. Perform repairs if necessary. In the lower part of the veneered sash, the veneer can peel off from dampness. It must first be glued, pressing until the glue hardens with a heavy load. If a large area has peeled off, plywood is placed under the load. Pressing even planes will eliminate the formation of blisters.
Work with doors begins after dismantling the fittings. If some elements cannot be removed, they are sealed with tape. Sometimes the complex design of the door block does not allow the sash to be removed. It is sanded, primed and painted in an upright position. The adjacent sections of the wall are covered with a film or tape.
The shield door begins to be painted from the end. From the top left corner move to the right. Following the direction will get rid of the accumulation of paint at the bottom.
The roller is well squeezed out of the paint. It is better to apply several thin, even layers than one thick one, but with blisters and streaks.
If the canvas stands upright and streaks form from the brush, they are wetted with a sponge, rolled out with a roller.
Any accessories that have not been removed, including hinges and a latch, are not painted.
The section of the box in contact with the end of the door is covered with three layers of paint.
The bristles are falling out on new brushes. Before use, they are combed out, soaked in water.