How to decorate wooden doors. Old doors are like new! Decor in the force of "decoupage"

Interior doors, regardless of their features, are designed to simultaneously perform two of the most important functions. Firstly, they serve as delimiting elements located between adjacent rooms of a house or apartment. Well, secondly, it is a full-fledged element of the interior, which plays an important role in the formation of the general entourage.

In many ways, the general appearance of the rooms depends on the external state of the interior doors. When there is a desire to refresh the existing furnishings of the premises, it is not at all necessary to start a global or cosmetic renovation. A noticeable result can be obtained by decorating the door.

Many methods are used to improve the appearance of interior doors. Some of these methods require significant labor and time. However, there are options that are simple and fairly easy to implement.

Consider the most popular, relatively inexpensive and simple methods of decorating interior doors with your own hands.

Watch a video with a selection of photos of interior door decor

Using paints to decorate doors

An ordinary door, previously painted white, does not look very presentable. To change the situation and make the door match the overall interior as much as possible, you can paint it decoratively.

The paint and varnish material should be selected for work only corresponding to the tone of furniture, curtains or wallpaper. The ornament or drawing should be selected in advance.

Read also: Lining ceiling (photo). Characteristics and types of lining, types of finishing with lining, stages of installation

In principle, it is not necessary to use a brush, especially when there are no special artist skills, a very good result is obtained when applying paint with a sponge or roller through a stencil matrix. Today, you can select and purchase the required stencil in special departments of building hypermarkets. You need to choose the ornament that will harmoniously correspond to the general style of the room.

The technology of decorating with paints is simple, it is carried out in layers in several stages. First, apply one paint (base coat) and let it dry completely. Then, using a stencil, paint of a different color is applied. When applying paints, color mixing will not occur as the base coat will be dry. Thus, each layer will retain its color, and the borders, thanks to the stencil, will be clear.

Application for decorating frosted glass doors

Any room will gain greater coziness and comfort if the transparent glass inserted into the door is replaced with a matte one or a special matting film is glued.

Advice! An excellent result (haze) is obtained when a mixture of fused chalk and liquid glass is applied to transparent glass. Care must be taken not to form smudges!

Decorating in this way should be carried out on the door removed from the hinges and laid on the floor. The working solution must be thoroughly prepared and mixed until smooth. Immediately after the preparation of the matting mass, you should start applying it to the glass, which has been cleared of grease and dust in advance. For a high-quality result, it is necessary to perform at least 2 layers of the matting mixture.

Interior door decor with wooden mosaic - simple and effective

Another type of decorative door decoration is wooden mosaic, fixed (usually with wood glue) on their surface. When choosing this option, you should not try to create a very intricate pattern or any composition of geometric shapes. Complex wood mosaic decoration requires a lot of experience with small wood elements.

Read also: Do-it-yourself parquet looping

Take into account! A modest look will look great if made with quality structural veneer made from two or more wood species!

The decorating technique is step-by-step and consists of the following sequence of actions performed:

- the door must be removed from the side hinges, and then laid flat on the table;

- with the help of tracing paper, the drawing is transferred to the door leaf;

- wooden mosaic elements are cut with a jointer or jigsaw;

- the prepared parts are alternately lubricated with adhesive and applied to the door surface strictly according to the previously applied sketch drawing;

- after the completion of the entire layout, the mosaic should be pressed down with some kind of weight for better adhesion of the parts to the door;

- the final stage - processing of the mosaic with fine-grained sandpaper after the adhesive has dried.

Decorating an interior door with wallpaper

The cheapest and fastest way to decorate a door is to wallpaper the surface. Technically, the method is similar to gluing wallpaper on the walls.

A canvas of beautiful wallpaper is taken, impregnated with special glue and attached to a pre-cleaned door surface. After that, using a soft cloth, the wallpaper is smoothed from the center to the edges of the door.

You can also decorate the door in the decoupage style, for which you will need beautiful, exclusive pictures from wallpaper or napkins. A single image is formed from the pictures, which is transferred to the door leaf.

Do-it-yourself door decor is a great way to add variety and a touch of creativity to the interior or exterior of your home. This is especially true on the eve of the holidays. In addition, over time, small defects may appear at the door, which decoration will again help to eliminate. How to decorate your door so that it looks stylish and beautiful - read this article.

A good technique for giving a room a bohemian-style charm is to decorate simple budget interior doors with rows of half-beads or rivets from a handicraft store.

A common idea is to paint and decorate the door with baguettes, repeating the theme of wall decoration. In this case, you can decorate the door with one or more framed paintings. In the photo - an unusual decor of the doorway by gluing a golden braid in several rows

Decor for a doorway Do not ignore not only the door itself, but also the space around the doorway. A good New Year's decor can be made by attaching colored ribbons around it. And at the top of the doorway, place such a festive element as a bow. On February 14, you can make an impromptu curtain of hearts by stringing them on long strings. And on March 8, the top of the doorway can be wrapped with a wreath of artificial flowers.

Door decor when it is damaged However, the need for door decor is not always associated with such pleasant chores as decorating for the New Year. Sometimes this decor is caused by necessity. After all, doors are short-lived and can lose their original appearance over time.

Painting an old, simple, budget interior door a mint color will freshen up the entire space and make it even lighter. How to do it - in the photo below

Refreshing a simple door and giving it a bohemian chic with a polyurethane chandelier socket and mint paint. Step-by-step photo instructions Scratches, chips, cracks - they are all enemies of the excellent appearance of the door. What to do in this case? Of course, the door can be replaced, repaired, but there is another option. Decorating the defect, hiding it from the eyes, will come to your aid. You can consider the following interesting options for decorating the door with your own hands: paste over the door with wallpaper; use mirrors; use a vintage style technique.

Door decor with wallpaper and mirrors Let's consider these options in more detail. So, to paste over the door with wallpaper, you can use both classic options and wallpaper made of fabric. The latter option is perhaps more preferable from an aesthetic point of view.

Pasting cabinet doors with fabric wallpaper

Before pasting, the door should be prepared in advance, removing all irregularities so that the material lies flat. You will also need to remove the paint coat and sand the surface. Apply a coat of primer. And only then start decorating the door with wallpaper. Instead, you can use regular fabric, which must be prepared in advance. It is not necessary to decorate the entire object in this way. It is enough just to mask the defect. For example, using cat stencils, you can glue the pattern onto the crack. Any shape can be used as a stencil. A door like the one in the photo will no doubt become a bright spot in your apartment.

If this option does not suit you, then mirrors can be used as decor. So, you can use acrylic panels with amalgam. And in this case, special attention should be paid to the preparation of the door. You can also use curly acrylic mirrors in the form of animals, flowers and other shapes. This decoration will also look good on sliding doors. In a similar style, you can make the decor of the doorway. In addition, the cabinet doors can also be decorated.

Decorating a door in vintage style This style is extremely popular at the present time and by decorating your front door or cabinet door in this way, you will not only disguise flaws, but also follow the latest fashion trends in decor. To decorate an entrance door in vintage style, you will need the following elements: sandpaper, rough; brushes, rollers; mounting glue; black baguette; PVA glue; sheets from music books or old unnecessary newspapers; transparent varnish.

The door must first be removed from the hinges and carefully processed: putty and sand. Next, we proceed directly to the decor.

Color the object white. When the paint is dry, we will achieve the aging effect by sanding it with coarse sandpaper.

We decorate the panels and the central part of the door. To do this, newspapers and notebooks need to be torn chaotically. On the doors, using a pencil, draw squares and rectangles at random. Lubricate them with glue. And randomly glue paper on them, smoothing it out immediately with our hands. Apply varnish on top in two layers.

Along the perimeter of the resulting wallpaper, glue a baguette. Additionally, any retro-style element can be used to decorate the door.

To decorate the door in this style, you can use ready-made stencils. Your version of the artificially old door is ready! (see photo) This decor can be done on the sliding doors of the cabinet, and for the doorway.

https://youtu.be/OQH94GGQNWI Source: http://happymodern.ru/dekor-dveri-svoimi-rukami/http://dvernoigid.ru/dekupazh-dveri-svoimi-rukami
Chic and austerity - this is how you can characterize the highlighting of individual elements on the door leaf with a bright color. For example, a snow-white door with black moldings looks beautiful. If this combination of colors seems trivial to you, feel free to experiment with contrasting shades. The door, painted in the following colors, looks great: sky blue with delicate yellow, green with white or red with blue. It is not a problem if there are no clearly marked moldings on the door, you can make them yourself - nail thin wooden slats on the door. Only at first it is advisable to paint them in the desired color, and then fix them with small carnations. Then you will have to brush over the surface again to freshen up the inserts. Another unusual solution - on an absolutely flat door leaf, you can highlight bright areas and build frames from wooden planks painted white. The bright pink door with white accents looks gorgeous.

If there is a need to update your home interior, but you do not have a lot of funds, then the best way out would be to decorate the doors with your own hands. Such work will cost quite inexpensively and will look luxurious and exclusive.

For these purposes, a variety of materials are used: paint of all sorts of shades, unique decoupage, luxurious moldings, colorful wallpaper, decorative stained-glass windows, etc.

The use of these materials and possible options for decorating doors are discussed in detail below.

Irreplaceable wallpaper

Wallpaper is a versatile material. They are used to decorate walls, ceilings and even doors. Usually, to implement design ideas, the remnants of wallpaper for walls or ceilings are used, which can be either plain or patterned. But the most popular are the most varied wallpapers.

The order of finishing is as follows:

• the door is cleaned of old paint;
• the wooden surface is sanded with fine sandpaper;
• wood putty is used to grout existing cracks;
• for good adhesion (adhesion) of the wallpaper to the door, dust is removed from its surface, and, if necessary, the door leaf is degreased;
• on all sides, the door is covered with one-color, solid wallpaper or a composition composed of separate elements of the wallpaper pattern.

Amazing fabric

A door covered with fabric looks no less attractive. However, the fabric is not suitable for every room. For example, it is highly undesirable to use it for the bathroom and kitchen, since the material can get dirty rather quickly, it will constantly absorb moisture and be saturated with extraneous odors.

A door decorated with fabric will look beautiful in a children's room. Thanks to the simple work with this material, it is possible to create original, attractive, bright drawings on the door surface or, using draperies, to give the children's room an atmosphere of fairy tale and magic.

To cover the door leaf with fabric, the following are used:

• special glue;
• wooden glazing beads;
• carnations;
• stapler for furniture.

When decorating a door with a cloth, it is necessary to ensure that the glue does not come out and that the edge of the cloth does not sprinkle.

The paint familiar to everyone

Painting is still one of the popular methods for renovating door surfaces. Pre-treatment of a door leaf for painting is similar to processing it for wallpapering. However, all work should be done more carefully so that the surface to be treated becomes as smooth as possible. Otherwise, after painting, all flaws will remain visible.

In addition, the door can be additionally impregnated with an antiseptic. On glass doors, if necessary, the glazing beads should be replaced.

Painting is carried out in a vertical or horizontal direction on a surface, conventionally divided into squares with a side of 50 cm.

In a paneled door, the inserts are painted first, and then the central and side parts of the frame. You can also apply patterns on the door for painting, which will make it exclusive and attractive.

Vinyl stickers and self-adhesive films

Ready-made vinyl stickers can be purchased at any hardware store today. Such stickers help to freshen up the interior and bring its own flavor to it.

An excellent alternative to wallpaper and painting is decorating interior doors with self-adhesive film. This is the easiest and fastest way to renew the door surface, transforming its appearance literally before our eyes.

Unique decoupage

Today, a rather fascinating way of hand finishing is gaining great popularity - decoupage. With this treatment, the door turns out to be unique, stylish and vintage. She organically fits into the surrounding interior.

Before drawing the pattern, the door leaf is cleaned and primed, then covered with napkins or special paper. From above, using a brush, it is gently covered with a solution consisting of water and PVA glue. After drying, it is covered with a layer of varnish.

Gorgeous moldings

Thanks to the moldings, it became possible to create an imitation of stucco molding on the door. These doors are perfect for a classic or antique style.

To fix moldings made of polyurethane or foam, it is enough to use glue similar in properties to liquid nails. Ease of use allows you to create real masterpieces on the door. The only drawback of this treatment is that it cannot be used on sliding doors.

Colorful mosaic

Mosaic is one of the rarer finishing methods, since its use significantly makes the door heavier and increases the thickness of its leaf. However, mosaic lovers can use it fragmentarily, which allows them not to put a lot of stress on the door and at the same time make it original and attractive. For pasting the door with glass elements, special tile glue, liquid glass or epoxy mastic are used.

Fascinating stained glass

Looking through the photos of beautiful door decoration, it is impossible not to pay attention to the stained glass windows. They just attract the eye. You can buy stained glass from a store, but it's much more tempting to make your own stained glass door.

To create decorative stained glass, mastic is used, which acts as a contour. This outline creates an imitation of a metal frame. In order for the glass surface to be evenly coated with paint, it is applied only in a horizontal position. Dried stained glass is attached to the door with glazing beads.

Whichever of the listed methods of door finishing is used, it will definitely transform the appearance of the interior and make it stylish, luxurious and unique.

Photos of beautiful options for decorating doors

Having completed repairs in the room, the owners may be faced with the fact that the old interior door does not correspond to the new interior, although in terms of its functional abilities it can still serve for some time. In this case, you should think about how to update the interior door with your own hands. There are several decorative techniques that differ in the complexity of execution and the cost of materials. You just have to choose the most suitable one.

Preparatory work

Before decorating interior doors, they are prepared. For this, the following tools are used:

• construction glue;
• tracing paper;
• Press.

It is necessary to dismantle the door. Then examine the canvas for defects. If the old box has scratches, they need to be repaired with wood putty. You can decorate the canvas with photo wallpaper. If in some places the doors are peeling, then an adhesive mixture is applied, tracing paper is applied, pressed. An adhesive mixture is also used to seal cracks and micro-crevices. If the defects are large, finely dispersed shavings are added to the adhesive.

Doors update methods

Simple ways to update the canvas include:

• applying varnish;
• staining;
• the use of stain and veneer;
• stained glass window.

Painting, varnishing and staining

Old wooden doors can be renovated by painting, varnishing and staining.

For the used water, synthetic and organic dyes. After that, the door takes on a neat appearance.

The door leaf is possible. Wood varnish is well absorbed into the wood, evenly covering the entire surface of the structure. The main plus of the protective and decorative composition is the presence of a toning base.
To apply varnish, use a spray gun or brushes. Experts advise to ennoble the tree with a brush that easily repeats the structure of the structure, soaking hard-to-reach areas well. To increase the protective properties, it is recommended to paint the door in 2 layers.

If you have to freshen the box again, stain is used. Then the coating is varnished. Stain can be used to update the color scheme of the canvas. It prevents mixing of tones, and due to subsequent varnishing, the brightness of the color is enhanced. Sanding gives a matte finish.

If there is no need to create a matte surface, polishing and drying is carried out after grinding. This technology gives the door a crystal shine.

Veneering

Veneer is used to decorate the door. This technique of decorating wooden canvases is used if they are made from cheap sawdust. Due to veneering, the door acquires an aesthetic appearance. Veneer must be glued transversely to the wood fiber.

Veneer gives the door a noble appearance of a real solid wood

Self-adhesive film

You can decorate the box with self-adhesive vinyl imitating wood. With this technique, coating defects are easily hidden. Before you paste over a wooden door, you will need to prepare a hair dryer, fabric, scissors.

At the first stage, the coating is cleaned from various defects. This stage is considered the most difficult. Next, the marking is performed using a tape measure. These canvases are transferred to the millimeter markings made by the manufacturer on the back of the film. A knife is used to cut the product.

The film hides all minor defects and makes the surface look like natural wood

The cut pieces of self-adhesive are applied to the desired section of the door. There is a protective layer on the seamy side of the film, under which there is glue. Carefully peel off a few centimeters of the layer to adhere the product to the door.

The cover, completely applied to the door, is smoothed out with a rubber trowel or soft material. Self-adhesive is wrapped on all ends of the coating. The corners of the PVC product are immediately cut, a lock with a handle is installed.

Wallpaper

With the help of modern photo printing, an image of the required size is transferred onto paper. Wall murals on wooden doors look beautiful. Any image is printed. To do this, you can use the services of an advertising agency or printing house. The image can be selected at home or with the help of specialists.

Photo wallpaper is one of the options for updating interior doors.

On plain wallpaper, you can stick polyurethane or foam moldings. In this case, the style in which the doors were decorated will change. The resulting design is suitable for a room decorated in a classic style. If you use a colored background or curved moldings, then the doors will be decorated in Provence style.

Before drawing the pattern, the surface is leveled, processed with glue. If paint comes off the door, it is removed. Wallpaper is also processed with glue.

A rubber roller is used to level the canvas. If bubbles remain, remove them with a plastic spatula. Then, the remaining air is removed from the center of the structure to the edges. With the help of this spatula, the joints of the wallpaper (if any) are ironed. If the technology is performed correctly, then the joints are not visible.

Wallpaper with moldings is suitable for classic interiors

The edges of the wallpaper must be cut with a knife. This is done until the glue softens the wallpaper. Otherwise, they will tear and stretch easily. Leave to dry for several hours. The process of decorating fiberboard or solid wood continues in 12-24 hours. It depends on the temperature and humidity level.

A simple pencil is used for marking. After the drawing has been applied, you will need to measure the length of the molding components with a tape measure. Then they are cut off, and the edges are sawn at an angle of 45 degrees. With the help of PVA glue, the back surface of the pieces is spread. They need to be glued along the exposed markings. When the canvas is dry, you can put it back. According to this principle, at home, you can update the doors of the bedroom, nursery, kitchen.

Drawings and paintings

The advantages of this decor include:

• beautiful and original appearance;
• simple execution;
• the ability to use ready-made stencils;
• wide range of materials;
• the embodiment of different ideas.

The downside of this method is that it requires artistic skill to apply..
At the first stage, the coating is degreased with alcohol and treated with a primer. The last composition is applied twice. Acrylic paint is used in the same way. Each next layer of paint is applied after the first layer has dried.

When zoning, the shape of the paneling part of the covering and the geometry of the ornament are taken into account. To give the surface a vintage look, the contours of the zones are covered with a different color. The paint can be applied with a sponge. The stripes that protrude on the door can be painted gold. Then the ornament is transferred to the surface and painted in suitable colors.

Decorating using decoupage technique

Decoupage does not require dismantling the door structure. You just need to wash and dry the coating. The opening is pre-pasted over with mounting tape. The tree is well and efficiently primed. The surface is rubbed with a simple paraffin candle and then painted. The next stage is gluing a decoupage card. It is pre-soaked in water for 12 minutes. The remaining water drops are wiped off with a cloth. The back of the strips and the door surface are processed with PVA glue.

For decoupage the door, special decoupage cards are used.

Each piece is glued tightly. In this case, you need to ensure that folds and bubbles do not appear. If such defects are not eliminated immediately after their appearance, the coating will turn out to be uneven.... If the coating is dry, putty is applied to the edge of the components. Excess composition will need to be removed with a wet rag or emery. A lacquered box will require a longer preparation for painting. The varnish is preliminarily removed, defects are eliminated.

If necessary, the edges of the canvas are processed, scuffs are left. This technology will give the flooring a vintage look. If the step-by-step instructions are followed, then the finished decorated doors will look original with details of different shapes. They can be cut from napkins. The color of the future canvas is selected taking into account the shade of the interior of the entire room. The gluing of the material is carried out according to the above method. The finished coating is varnished with an acrylic base.

Antique decoration

An antique wooden door can be seen not only in apartments, but also in houses and offices. At the same time, decor that imitates antiques is rare. It gives individuality to the door leaf. Craquelure means a two-layer application of varnish on the door. Particular attention is paid to the selection process of the varnish - each layer should have a different composition and different drying times. Preliminary cleaning, degreasing and drying of the coating is carried out.

Craquelure gives the door the look of old wood

To age the door, you will need some materials:

• special varnish for craquelure;
• bituminous varnish, which gives the effect of antiquity;
• acrylic paint.

Craquelure varnish is applied to the prepared coating. If 1 layer is dry, 2 layer is applied - bituminous varnish. It is needed to enhance contrast when using a white background. If a dark tone is applied, acrylic paint is applied. This technology is considered the best. If necessary, the craquelure varnish is replaced with simple PVA glue, vinegar, egg white or gelatin. This door renovation technique is suitable for people who like antique style.

Decor with stencils

If you have skill in the processing of wood products, you can use a more complex renewal of the canvas. To apply decor with a stencil, you will need:

• leather;
• glass or mirror tiles;
• stained glass;
• mat;
• bamboo curtains;
• bars;
• veneer.

To carry out such a decor requires perseverance and good imagination. As a result, it will be possible to make an original door that will perfectly fit into any interior.

Using stencils, you can change the design of the door

The door, the leaf of which has been replaced by a stained-glass window, gives the room an unusual look. To implement this idea, water paint is used. Previously, the desired pattern is thrown onto the surface. Paint is used to transfer the design to the glass cover. This procedure is performed in a specific sequence:

• preparation of a sketch of a drawing on paper;
• glass processing by cleaning and degreasing;
• substitution of the picture to the glass, followed by a stroke from the back with a thin brush;
• receipt of the contours of the drawing in different colors of paints.

After the completion of the process, the paints should dry within 22 hours. Then a piece of glass is mounted in the door, well fixed.

Opening and Slope Updates

In addition to the door itself, the doorway is also being updated. If this is not done, then the canvas will have an unfinished look. In order to successfully complete the above work, it is recommended to think over the finishing step by step.

The decoration of the slopes and the opening must match the interior of the door and room

In the first step, support guides are processed. Then they are repainted in the same color as the door leaf. In case of severe wear, plasterboard sheathing is mounted on the guides. In the presence of roughness, perforated corners are used for cladding. Then the opening is repainted.

In the future, it will be required correctly. For their installation, special clamps are used that hold the platbands well. In the absence of clamps, glue or self-tapping screws are used.

If the door is updated only with the opening, and the slopes remain the same, then the decor process is considered incomplete. For finishing the slopes, different methods are used. More often, special MDF strips are used to update the slopes. You can also install plasterboard slopes, which are fixed to perforated corners or glue.

Another technique for finishing the slope is plastering. This process is the most time consuming and requires experience and qualifications in this matter. Experts believe that the best solution is plastering followed by installation of pearlite slopes, which are not cheap. But in the end, you can get strong and durable slopes. Mold does not appear on them.