Homemade from a Husqvarna chainsaw. What can be done from a chainsaw with your own hands

At all times there were "Kulibins" who could make something truly innovative and useful out of ordinary things. In the event that there are no ideas in your head, and the desire to do something with your own hands does not give rest, then you can start with the already existing and proven developments. Do-it-yourself homemade chainsaws are perfect for this. Especially for those who are not used to sitting idly by, our editors have prepared a review with detailed photos and video instructions on how and what you can make from an old chainsaw.

Not sure how best to use a chainsaw? Read site recommendations

Read in the article

What and how can be made from a chainsaw with your own hands

The chainsaw is a versatile machine. The size of the tool is small, but the power of the motor allows you to use it for almost any purpose. The "Rotor Heart" will feel great when transplanted into an ice ax or any other device where an autonomous drive is needed. Let's take a closer look at some know-how.

How to make a snow blower from a chainsaw

If you have a chainsaw and parts from an old car, then you can start designing. Typically, a rotary drive is used to drive the screw. This is a special shaft designed in a special way to collect snow.

Illustration	Action Description
	As the main shaft, we use rods from the front pillars of the VAZ 2110, welded together.
	To connect the joints, we use just such a coupling.
	These are sheets for welding auger blades. Size - 140 × 100 mm, traditional thickness - 2 mm.
	For the drive, you can adapt a star from the Voskhod motorcycle. The back of the part is welded with a prepared 5 mm metal disc. With a hole made for the diameter of the shaft.
	This is what the details looked like before.
	We make the blades of the auger from a metal sheet of 2 mm. To do this, a circle is cut out on the outside with a diameter of 300 mm, and inside - 220 mm, and stretched from the star to the shoulder blade.
	We cook the frame from the same "two" and bearing strips with a radius of 160 mm.
	We bend the body from a sheet of 1 mm. We weld with sidewalls.
	This is the screw we ended up with.
	The diameter of the hole for the "ejector" of snow is 160 mm. For rotary mechanism you can use a plastic pipe.
	But the gutter itself is best made from a galvanized sheet of 0.75 mm.
	We remove everything superfluous from the saw, clean it, paint it black. We disassemble the saw star.
	We clean all the details, center, weld the star from the Java motorcycle.
	The chainsaw engine is laid on rubber cushions.
	We put the frame for mounting the motor on the shock absorbers.
	We paint the whole structure and do a test run. Everything works!

Do-it-yourself chainsaw snowmobile

To make a homemade snowmobile from a chainsaw, you will need some factory-made parts (for example, a gas cable to the steering wheel) and a children's snow scooter.

Illustration	Action Description
	To create a snowmobile from the Druzhba-4 chainsaw, we need a children's snow scooter.
	To create a caterpillar, take 25 polypropylene pipe, cut off by 20 cm, cut in half lengthwise.
	As a tape for a caterpillar, you can take old tire from a car tire.
	In our work we use sprockets of the MHC elevator drive.
	Further, in this way, with the help of screws and prepared plastic pipes create our caterpillar.
	We begin to assemble the drum with the shaft.
	We fix the plastic stars and the Karpatka driven from the moped.
	We take tensioner rollers from the Ryazanets potato harvester.
	The next step is to manufacture track tensioners and the frame itself.
	We install the chainsaw on the frame, and now you know how to make a snowmobile out of a chainsaw.
	We remove the plastic from the snow scooter and modify the frame, attach the "motorized dog".
	The connections are fastened like a rear fork, like on a motorcycle, only without shock absorbers.

Homemade chainsaw sawmill

Craftsmen offer dozens of different options for how to "adapt" a chainsaw for. Most often, such structures require a frame to be connected to install a “carriage” under or a so-called tire. As guides, improvised tools are used, for example, an ordinary ladder.

The most important thing is to firmly weld the frame, controlling yourself by level. Rivne and solid foundation help to avoid distortions and vibrations during operation. Consider also at what distance and height the chainsaw will be fixed. The durability of its work depends on this. Carriage attachment too close to working area will lead to clogging of the chain mechanisms and failure of the motor.

If you do not plan to cut large logs, you can do manual version sawmills. More in this video.

How to make an ice drill from a chainsaw with your own hands - diagrams

The drill is an indispensable thing for those who know how and love to work around the house: it is used when construction work, installing supports for the vineyard, and, as well as ice fishing to prepare holes.

To make an ice drill from a chainsaw with your own hands, you need a diagram and the following devices:

Chainsaw motor.
Gearbox for a chainsaw for a drill.
Boer himself.
Metal pipe.
Drill.

The most important thing is to choose the right gearbox for the motor, make necessary calculation compatibility of their characteristics. The chainsaw motor may be too "frisky" for a simplified gearbox design.

The first thing to do, if you put aside the humor and take the task seriously, is to determine the dimensions of the input shaft and choose the correct mounting points for the drive gear. Fixation around the perimeter is best done with studs and dowels. Such a mount will simplify the process of changing nozzles in the future. If you do not have the skills of a turner, then a turner and our schemes will help you make a special adapter for the auger auger.

Do-it-yourself boat motor from a chainsaw

It can be expensive to buy a ready-made sample of a boat motor, and if you have an old motor from the Druzhba chainsaw lying around and you are friends with and, then making such a homemade product is not difficult.

Illustration	Action Description
	Remove the clutch and tire from the chainsaw. Only a shortened crosspiece remains.
	On the rod we make a groove under this cross, put the bearing.
	Below we also install bearings, the clamps are taken from the Soviet outboard motor.
	From the grinder we take a 250 gearbox, screw and keel. Everything is fixed on silicone with additional glands. Transmission grease is filled inside.
	And the water engine is mounted on the base with a slight movement of the hand along the guides, the structure is fixed with standard nuts.

Among the main advantages of homemade products are high power, which provides a decent speed of movement across the water surface, and economical consumption of fuel material. For an hour, a homemade chainsaw consumes 1 liter of gasoline at a speed of 20 km / h.

How to make a moped from a chainsaw and a bicycle

For manufacturing you will need:

chainsaw;
old hand winch;
a rigid frame on which everything will be installed;
two sprockets and a durable motorcycle chain to transfer torque from the saw engine to the gear of the gearbox.

Options for attachments for a chainsaw with a winch function:

If you have not yet found a homemade option for yourself, read further in the review of our editors what else can be done from the Druzhba chainsaw.

How to make a motor drill from a chainsaw with your own hands

Consider the option of assembling a nozzle on a chainsaw using a part from a conventional drill.

Illustration	Action Description
	We disassemble the electric drill, dismantle the working gearbox.
	We bore the anchor from the drill, from the parts of the sleeve and the head we weld the structure, which will transmit the rotation to the shaft.
	We make the mount for the gearbox from a piece of metal and a pipe.
	The design is fixed to the saw body with two bolts.
	This is what it looks like finished construction bushing gearbox.
	We insert a drill into the sleeve, it will continue to transmit torque to the drill.

By the same principle, it is also made from a chainsaw, only a plow is used as an additional device for it.

Do-it-yourself petrol cutter from a chainsaw

However, such models will cost much more. homemade nozzle, which you can do with your own hands.

Illustration	Action Description
	We disassemble the electric drill, the main task is to remove the asterisk, which will be replaced by a pulley in the future.
	We put the pulley, bearing and plate. After that, install the "native" clutch.
	In order to fix the piston in a dead center and facilitate the assembly and disassembly of the pulley, you can use a regular cord with knots.
	Next, install the starter and close the lid, you just have to attach the nozzle with the disk.

A homemade gas cutter is much more powerful than a grinder. It can be used for cutting metal pipes large diameter, as well as their grinding.

RC car powered by a chainsaw

If your child really wants a radio-controlled car, but what is sold in the store, he considers a toy "for girls", you can try to make a real racing car with a chainsaw engine.

Illustration	Action Description
	We get such a piston, we assemble a carburetor.
	They took a ready-made racing car as a basis.
	Our task is to make the drive and exhaust pipe and ensure that stones or bolts do not get into the piston.

This video shows the machine in action!

How to make a grinder from a chainsaw

Actually, this is a continuation of our story in the paragraph about how to create a gas cutter, only for reincarnation it is necessary to adapt it to a special nozzle.

Nozzles for a chainsaw with a belt drive:

To reduce the chance of blade breakage, the saw can be equipped with protective cover, and reduce the number of revolutions with a high-speed gearbox.

Features of creating homemade products from the Ural chainsaw

The choice of a chainsaw for rework should be taken extremely seriously. It is very important to calculate the power of the device and the tasks that the new product will have to solve. For example, the Ural chainsaw is considered one of the most powerful in its class.

Using a Ural chainsaw to convert a children's bike into a moped is extremely dangerous. Too much revs can simply break the chain and cause injury. But the huge advantage of the Ural is that chainsaws have not been discontinued and are still in service. Therefore, replacement parts can always be found.

Features of creating homemade products from the Druzhba chainsaw

Although it is quite old, it is a proven "friend" of all skilled people. This saw, no matter how many decades it would gather dust in the garage, will always help out in a difficult moment and become assistants in solving a large number of important tasks. The motor, although it does not differ in an excess of “horses”, will quite pull for reworking devices that are useful in everyday life and in the country.

At all times, there were craftsmen who could make, it would seem, something truly amazing from ordinary things. It is thanks to such people that the development of science and technology does not stand still, but strides forward by leaps and bounds. In the event that there is no head innovative ideas, and the desire to do something with your own hands does not give rest, then you can start with the already existing and proven developments. A homemade chainsaw for such a situation is the best fit.

Today you can find many ways to use a chainsaw for other purposes. There are a lot of things that can be done with this tool, as well as from it. Looking at some devices, I want to exclaim: “How did I not think of this before ?!”

The engine is the main technological link on the basis of which homemade products can be made. We have already learned how to design the following useful devices from a chainsaw:

sawmill;
means of transportation (land, water, air);
cutting tool;
portable compact power plants;
water pump.

These are just the most common and popular options. Below will be presented more detailed information about some transformations.

The simplest upgrade

A sawmill is a homemade chainsaw that does not require much effort, but it can greatly facilitate the process of sawing logs into boards. We can say that in this case the saw in a somewhat modernized state is used for its intended purpose.

It is almost impossible to dissolve a long log on weight. The problem can be solved elementarily. This will require, firstly, a metal frame on which the saw will be rigidly attached. Secondly, the rail track along which the workpiece will be fed.

Moped

This transformation is somewhat different from that described earlier, since the very purpose of the device changes here. The motor of the tool is proposed to be used not for cutting anything, but for moving in space. Of course, homemade products from the Ural chainsaw will by no means be able to compete in power and speed with the motorcycle of the same name, but the moped will turn out to be quite efficient.

The owners are very proud of this vehicle. It's not about the running characteristics of their offspring, but in principle. A moped assembled “on the knee” shows the skill and thriftiness of a person, demonstrates to everyone his

The base of such a vehicle is on the frame of which the motor is mounted from the same ancient chainsaw. Best for energy transfer

Some enthusiasts go a little further in their research and take a mountain bike as the basis for a homemade vehicle. In this case, it will be possible to control the speed of movement. To do this, you just need to equip the moped with a gearbox.

Motor cultivator

You can list for a long time in which areas of activity home-made products from people with land are used in our country, which has led to the fact that such "masterpieces" are quite often used on summer cottages as motor cultivators.

As far as this device is useful in everyday life, it is so easy to assemble it. To do this, you only need a transmission system consisting of a pair of gears. With the help of it, the energy of the engine will be transferred to the drive wheel, which sets the working mechanism in motion. The disadvantage of this design is the small power, which will not be enough to plow virgin soil, but for a small well-groomed area she's enough.

Power station

A portable power plant capable of providing power to those in the most remote places from civilization is one of the marvels of engineering.

Such a homemade chainsaw can be designed by a person who is at least a little versed in mechanics and electrical engineering. The parts list should look like this:

chainsaw;
gear reducer;
drive belt;
metal bar;
generator;
Remote Control.

snow blower

Since winters in middle lane are very severe, and there is no lack of snow, then enlist such an assistant as manual snow blower everyone dreams. This is a completely doable task. It's all about the principle of the engine, which is based on the fact that its rotational energy can be used for any purpose.

A chainsaw with a power of 3 kW or more can be converted into a snow blower. The whole trick will only be how to mount the screw assembly. Its blades must be made of a durable, but at the same time sufficiently light and elastic material, such as rubber. Further actions do not differ at all from what was described in other paragraphs. With the help of a chain, the motor is connected through a gear pair to the screw assembly. From a practical point of view, it would be correct to use sled skids instead of wheels, and take a curved one as a snow thrower. water pipe large diameter.

What can be made from a chainsaw - chainsaw homemade

The principle of rework

The basis of virtually any homemade chainsaw is its implementation as a universal drive that can be used for a huge number of different devices. The scope of their use is very wide: cutting stone and metal, pumping out water, cleaning snow, drilling wells and holes, driving, moving various objects, swimming and even flying.

They realize the potential abilities of a chainsaw with the help of various devices and attachments. The basis of any alteration is the usual principle of power take-off of the motor: the device necessary for the master is connected to the output shaft. The presence of a massive motor, small dimensions and the comparatively light weight of this tool, autonomy and the ability to work in virtually extreme conditions make its capabilities truly endless. Equally important is the convenient design of the clutch, which protects the components and systems of the saw from damage and overload. What kind useful homemade can be made from what can be made from thicker saws. Do-it-yourself chainsaw crafts. A tool made from a chainsaw has its own density, so it can be used in virtually any position.

What can be made from a chainsaw

All homemade products can be divided into 2 groups:

more ordinary devices (grinder, ice drill, pump, winch, walk-behind tractor, outboard motor, great, moped);
more complex mechanisms and objects (sawmill, snow blower, snowmobile, snowmobile, power plant, helicopter, solid forged knife).

For the production of all of the above devices, you can use different brands of chainsaws. When choosing them, you should take into account the required power for the normal operation of the alteration. What can be made from. In most cases, for the production of different devices, the following brands of chainsaws are used: Friendship, Calm, Ural.

The simplest homemade chainsaw

Below are different variants devices made from chainsaws. Everyone who wishes will be able to use such ideas in their own household. From a chainsaw with a small amount additional materials can do:

Bulgarian. The main system of such a device is a bearing assembly with a shaft. Do-it-yourself chainsaw crafts. At one end, a driven pulley is installed, which rotates with a V-belt. On the other, a mandrel for cutting wheels is fixed. Depending on their brand, such a grinder can cut stone, metal, brick and other building materials.

ice drill. For good operation of the device, the screw speed should not be high, so it is necessary to use a gearbox made in the form of a worm or V-belt drive. Such a device can be used in the construction of a foundation from screw piles and for other earthworks.

Read also

Water transfer pump can be used for watering the garden, emergency water supply, drainage of reservoirs or flooded basements. This nozzle is a simple centrifugal pump, equipped with a bracket to attach to the saw and a pulley that drives the pump turbines.

Winch, which uses a chainsaw drive. chainsaw potato hiller The first do-it-yourself potato hilling. The traction force of such a device directly depends on the power of the saw motor. Using additional block it can be increased significantly. This device equipped with such additional details as a tap-off block, hooks, belts, anchors.

Cool ideas for a chainsaw. Interesting fixtures and fittings. What can be made from a Homemade snow blower can be made from a saw. Unusual use of a chainsaw.

ItalianLight Sergey Rybakov Murmuration in Florence.

A moped from a chainsaw and a great one with your own hands! #one

special extension ALITOOLS. cheap chainsaw.

Outboard motor from a chainsaw- a great alternative to buying an expensive engine. To ensure movement of 20 km / h, it is enough to install a home-made outboard motor with a gearbox (gear ratio 2: 1) and a 3-blade propeller with a diameter of 210 mm on the boat. At the same time, fuel consumption will be only 1 liter per hour of engine operation.

Motor cultivator almost anyone can assemble from a chainsaw. Everything about repairing a chainsaw with your own and from the hole where this hole (breather) can. This requires a transmission system (2 gears). Everything about repairing a chainsaw with your own hands is in order to assemble. pen from hand. With its help, the energy of the motor is transferred to the drive wheel, thanks to which the working mechanism is set in motion. Of course, such a cultivator is of little use for cultivating a huge field, but for personal plot its power is sufficient.

Chainsaw moped. For such a vehicle, you will need a base, for example, old bike. What useful homemade products can be made from a chainsaw? A chainsaw motor is attached to its frame. As a rule, a gear is used on such a vehicle. If a mountain bike is used for conversion, then a gearbox will be needed to control the speed of movement.

For the manufacture of the following devices, the master needs some technical knowledge and experience with various mechanisms and materials. From a chainsaw using various components, you can create the following homemade products:

Chainsaw sawmill, which can be done with metal frame. A chainsaw is rigidly attached to this frame. Workpieces can be guided along the rail track. Do-it-yourself homemade chainsaws: photo. There are other options for sawmills. So for a device designed for longitudinal sawing, you will need an adapter attached to the tire located at its base and a guide that sets the direction of movement of the adapter. The guide is installed on a board attached to the sawn log. Do-it-yourself sawmill from a chainsaw drawings. Do-it-yourself sawmill from a chainsaw drawings. With the help of such a sawmill, logs can be divided into 2-4 parts.

Read also

Chainsaw portable power plant is able to provide energy in any places remote from the power grid. To create it, the following components are needed: a gear reducer, a generator, a metal bar, a drive belt, a control panel. Powerful saws Druzhba and Ural are most suitable for such a device.

Homemade snow blower can be made from a saw whose power exceeds 3 kW. For it, it is necessary to mount a screw assembly with blades made of durable but elastic material. Do-it-yourself sawmill from a chainsaw: assembly and video. The chain connects the motor to the screw assembly through a pair of gears. You can attach both wheels and skids to the snow blower. Any large diameter pipe can be used to throw snow.

Homemade snowmobile from a chainsaw its design is a little more complicated than a sawmill. The snowmobile consists of a frame, engine, track and steering. He also needs skids for movement. To create it on the steering wheel, you need to take out the gas and clutch. Do-it-yourself walk-behind tractor, from a chainsaw description, photo, video. You should also consider a shock-absorbing suspension system of the carrier frame. Since the chainsaw does not have a transmission, the clutch on a homemade snowmobile is centrifugal. A poly V-belt and a chain are also used. For the steering mechanism, you can use the parts of an old bicycle. It is being redesigned so that the central axis moves the turning skis of the thrust. Do-it-yourself chainsaw repair Stihl. To enhance traction, a traction gear is installed on the caterpillar drive shaft. Engine power must be at least 5 hp.

Snowmobile from a chainsaw much easier to make than a snowmobile. A large propeller driven directly by the chainsaw's engine provides the driving force. A serious limitation on the use of such snowmobiles due to their insufficient cross-country ability is the low power of the chainsaw engine. For trips on snowy fields, an engine with a power of at least 12 hp is required.

Helicopter knapsack type from a chainsaw. Do-it-yourself snowmobile from a chainsaw. Such aircraft can take to the air only when at least four engines are used in its design, with a total power of 20 hp or more, operating in a coordinated mode. It will not work to make it from one chainsaw. The use of such homemade device may be life-threatening.

One-piece forged chain knife can be done by people familiar with blacksmithing. To do this, first of all, the old chains are divided into pieces, which are then welded into blanks. Garden chopper: how to make it yourself A garden chopper is an indispensable tool for a gardener and gardener. They are heated in a furnace to 850°C. The blanks are pressed until they get rid of the voids between the links. Next, the metal is subjected to forging until the workpiece is given the required shape and strength.

Table for manual circular saw Created by: admin-hm · Posted 20 nine July two thousand 10 · Updated thirteen February 2012 stationary saw(lightness, the highest specific power, the lowest price, etc.), tool) the myth has a number of n...

Homemade chainsaws are an interesting topic for craftsmen and craftsmen. Using this gasoline-powered device, you can create a variety of units that are useful for home use and not only. The main thing is to have some skills and let your imagination fly.

The basis of any homemade device from a chainsaw is its use as a drive. Such homemade products from gasoline saws are used:

in cutting stone and metal materials;
in pumping out water;
in well drilling;
in snow removal;
driving and even flying.

What can be made from a chainsaw? A question that worries many craftsmen.

Homemade devices assembled from petrol saw divided into 2 types:

simple in design. This includes, for example, a grinder, a winch, etc.;
more complex in design. This group includes: sawmill, snowmobile, power plant, etc.

One of the hand-made units can be a chainsaw generator. It is especially useful for cottages and areas where there is no centralized power supply. famous the simplest design a gas generator assembled from a chainsaw and an electric motor of an old washing machine is considered.

Using a saw engine, you can build a device similar to a grinder. A chainsaw chainsaw can be used for cutting metal, wood, concrete, tiles, for trimming and grinding.

A cultivator can be made from a saw, the work of which is based on the fact that the motor, by rotating a pair of gears, transfers the increased traction force to the drive wheel. A chainsaw cultivator can handle small areas.

Is it possible to build a trencher from a gasoline saw? Probably yes. But it is clear that the possible technologies are complex, and the idea itself is not so rational. However, it is hard enough to find good guide for the manufacture of such a unit.

Masters can independently design a motor drill from a chainsaw - the so-called gas drill. The following components are used to assemble this device:

Saw motors.
Reducers.
Boers.
Metal pipes.

Such a motor drill is used for earthworks (create recesses with the desired diameter and depth in order to strengthen load-bearing structure any building).

Simplify the work of a fisherman in winter when drilling ice can also homemade device based on a chainsaw - ice drill. For the construction of such a unit will need whole line tools and materials.

A self-made device - an ice drill will still come out cheaper than buying an analogue in stores.

With the help of a gasoline saw, you can build a compressor. To do this, you must have good knowledge, including engineering graphics, because such a craft is quite complicated.

Some craftsmen are interested in the question of how to make a snowmobile from a chainsaw. For the construction of snowmobile transport, the following main parts and materials are required:

frame;
engine (with a power equal to at least 5 hp);
caterpillars;
steering mechanism (bicycle parts will also fit);
skids for movement.

It is necessary to develop and depreciation. You should also take into account some other nuances in the design of such a snowmobile.

A motor pump is essentially the same pump, only powered by a gasoline or diesel engine. Therefore, a motor pump can also be assembled from a chainsaw. The unit consists of a centrifugal pump having a support that serves to fix it with a saw, and a wheel that drives the pump turbines (pulley).

How you can make your own pump from a gasoline saw and a vane pump is very clearly shown in the following video.

About others homemade inventions more details below.

Do-it-yourself motoblock from a chainsaw

For the construction of this device, a gasoline saw engine and a 2-stage chain drive are used. The frame with the structure located on it can be welded from a metal profile (32x32). The engine with the gearbox is attached to the transverse corners top frame. The fuel tank is mounted on a support from a 15x15 corner.

Do-it-yourself sawmill from a chainsaw

For such homemade sawmill a metal frame is used to which the saw is attached. Workpieces can be guided along the rail track. There are different variations of sawmills. For the design of the unit for longitudinal cut you need an adapter that is attached to the tire, and a guide that sets the direction of its movement. The guide is installed on the board, which is attached directly to the log. With the help of this sawmill, logs can be divided into several parts (2 - 4).

DIY chainsaw kart

Kart is a small car that does not have a suspension and is able to quickly develop a decent speed. Such a car without a body consists of the following main components:

steering system.
brake system.
Engine.
Chassis.

Homemade karts often use a chainsaw engine. Before assembling the kart, the engine must be prepared (remove all unnecessary details: tanks, chains, etc.). Chainsaw sprocket teeth are ground down, giving the sprocket right size. The next step is to install the engine mount.

Do-it-yourself karting from a chainsaw and other materials is relatively cheap and fun. Although the process of assembling a map is quite complicated and requires certain skills.

You can also build a buggy from a chainsaw.

Chainsaw ATV

Homemade karting has very similar construction steps to an ATV. Using a chainsaw engine, you can build children's quad bike. This will require a gearbox or intermediate shaft to increase traction and torque. Among other things, a children's ATV has some other assembly features in comparison with the manufacture of a kart.

Homemade snow blower

Snow blower - a device that clears snow, which can be built on the basis of a chainsaw with a power of more than 3 kW. Many craftsmen do not use wheels, but install the simplest sleigh skids. A particularly important part in the creation of such a unit is the installation of a screw assembly driven by a gear pair and a chain. In the manufacture of the blades, rubber is used; in the construction of the intake device, steel is used. Sewage pipe made of plastic, mounted on the intake, can serve as a snow thrower.

Great with a chainsaw engine

You can install a chainsaw engine on a bicycle. On such a bike, you can accelerate to 50 km / h, and sometimes even higher. In order to design this transport, an engine from a chainsaw with a power equal to 1.5 - 2 hp is required. - this is enough to develop a speed of 30 - 40 km / h. It is clear that you need a container used as a gas pack, you can’t do without wires and a switch to connect the engine ignition, etc.

A chainsaw bike consumes a minimum amount of fuel.

How to make a motor for a bicycle out of a chainsaw, they tell in detail different masters in the Internet.

Homemade winch

AT homemade winch a gasoline saw motor can be used, on the power of which the traction force of the entire unit depends. In addition, a chainsaw winch is equipped with:

bypass block;
hooks;
belts;
anchors.

Chainsaw powered scooter

On homemade scooter a chainsaw motor can also be installed. The engine must be prepared: the saw bar and chain must be removed. Other constituent parts remain intact. The preserved motor housing makes it easier to attach it to the scooter platform.

Chainsaw crafts can be very different. They are assistants in the economy, help to keep the budget. However, to create a safe device, you need to have certain skills and knowledge. Therefore, it is important that homemade products are made by really craftsmen.

In the hands of craftsmen conventional chainsaw, originally intended for sawing wood, becomes truly multifunction device. At the same time, the breadth of its application is simply amazing in its diversity. On sale meet different kinds special nozzles that greatly expand the capabilities of chainsaws. These include the following attachments: a petrol cutter, a scorcher, a pump for pumping water, a motor, a brush cutter, a snow blower, and others. But, despite this, many craftsmen remake chainsaws on their own, using improvised materials. Do-it-yourself homemade chainsaws can be made by almost anyone who is more or less versed in technology.

The principle of rework

At the heart of almost any homemade chainsaw is its use as a universal drive that can be used for huge number various devices. The scope of their use is very wide: cutting stone and metal, pumping out water, cleaning snow, drilling wells and holes, driving, moving various objects, swimming and even flying.

Realize the potential of a chainsaw with a variety of attachments and attachments. At the heart of any alteration is the simple principle of engine power take-off: a necessary for the master device. The presence of a powerful motor, compact dimensions and relatively light weight of this tool, autonomy and the ability to work in almost extreme conditions make the possibilities truly limitless. Equally important is the practical design of the clutch, which protects the components and systems of the saw from damage and overload. A tool made from a chainsaw is distinguished by its tightness, so it can be used in almost any position.

What can be made from a chainsaw

All homemade products can be divided into 2 groups:

most simple devices(grinder, ice drill, pump, winch, walk-behind tractor, outboard motor, bicycle, moped);
more complex mechanisms and objects (sawmill, snow blower, snowmobile, snowmobile, power plant, helicopter, solid forged knife).

For the manufacture of all of the above devices, you can use various brands of chainsaws. When choosing them, one should take into account required power for normal operation alterations. Most often, for the manufacture of various devices, the following brands of chainsaws are used: Friendship, Calm, Ural.

The simplest homemade chainsaw

Below are various options devices made from chainsaws. Anyone can use these ideas in their household. From a chainsaw with a small amount of additional materials, you can make:

Bulgarian. The main system of such a device is a bearing assembly with a shaft. At one end, a driven pulley is installed, which rotates with the help of a V-belt. On the other, a mandrel for cutting wheels is fixed. Depending on their brand, such a grinder can cut stone, metal, brick and other building materials.

Winch, which uses a chainsaw drive. The traction force of such a device directly depends on the power of the saw motor. When using an additional block, it can be significantly increased. This device is equipped with such additional parts as a tap-off block, hooks, belts, anchors.

Motor cultivator almost anyone can assemble from a chainsaw. This requires a transmission system (2 gears). With its help, the energy of the motor is transferred to the drive wheel, thanks to which the working mechanism is set in motion. Of course, such a cultivator is of little use for cultivating a huge field, but its power is quite enough for a personal plot.

Chainsaw moped. For such a vehicle, you will need a base, for example, an old bicycle. A chainsaw motor is attached to its frame. As a rule, a gear is used on such a vehicle. If a mountain bike is used for conversion, then a gearbox will be needed to control the speed of movement.

Chainsaw sawmill, which can be done with a metal frame. A chainsaw is rigidly attached to this frame. Workpieces can be guided along the rail track. There are other options for sawmills. So for a device designed for longitudinal sawing, you will need an adapter attached to the tire located at its base and a guide that sets the direction of movement of the adapter. The guide is installed on a board attached to the sawn log. With the help of such a sawmill, logs can be divided into 2-4 parts.

Homemade snow blower can be made from a saw whose power exceeds 3 kW. For it, it is necessary to mount a screw assembly with blades made of durable but elastic material. The chain connects the motor to the screw assembly through a pair of gears. You can attach both wheels and skids to the snow blower. Any large diameter pipe can be used to throw snow.

Homemade snowmobile from a chainsaw its design is a little more complicated than a sawmill. The snowmobile consists of a frame, engine, track and steering. He also needs skids for movement. To create it on the steering wheel, you need to take out the gas and clutch. You should also consider a shock-absorbing suspension system of the carrier frame. Since the chainsaw does not have a transmission, the clutch on a homemade snowmobile is centrifugal. A poly V-belt and a chain are also used. For the steering mechanism, you can use the parts of an old bicycle. It is being redesigned so that the central axis moves the turning skis of the thrust. To enhance traction, a traction gear is installed on the caterpillar drive shaft. Engine power must be at least 5 hp.

Helicopter knapsack type from a chainsaw. Such an aircraft can take to the air only when at least four engines with a total power of 20 hp or more working in a coordinated mode are used in its design. It will not work to make it from one chainsaw. Using such a homemade device can be life threatening.

Can be done by people familiar with blacksmithing. To do this, first of all, the old chains are divided into pieces, which are then welded into blanks. They are heated in a furnace to 850°C. The blanks are pressed until they get rid of the voids between the links. Next, the metal is subjected to forging until the workpiece is given the required shape and strength.

What did you do with a chainsaw?