Adjusting the geberit fittings for the dora toilet. How to install a Geberit installation yourself

Geberit was founded in late XIX century. At the present time, this brand is associated with a very high quality The company has gained an excellent reputation over the years. Among modern consumers are very popular Geberit installations: This equipment is reliable and durable. In order not to be disappointed in the results installation work, when installing the installation, you need to take into account certain rules that will be discussed in this article.

Peculiarities

The Geberit installation looks like a frame made of metal frames, on which a sink, wall-mounted toilet or other sanitary ware is installed. All communications that are needed in a particular case are connected to this equipment. A drain tank is also attached to the frame.

Much of the structure is hidden, and for this reason, such equipment does not spoil the design of the room. The frame itself is usually attached to a main wall or plasterboard partition. It is in a vertical position.

Advantages

Geberit installations have many advantages.

Long service life. The company guarantees uninterrupted operation of the equipment for ten years.
Maximum reliability. You don't have to worry about the structure ever falling down.
Saving space in the room.

The ability to purchase various components: gaskets, fasteners, an exhaust valve to eliminate leaks, and so on.
The ability to use such a system to hide defects in the finish.
Ease and speed of assembly.
No risk of leaks.
Aesthetics appearance designs.

One of the main advantages of such installations is the regulation of water drainage. With the help of a special button, you can control the flow of liquid.

Frame types

There are the following types of such systems:

Frame. These structures are attached to load-bearing or main walls;
Block. Such systems are kept on plasterboard walls, thin partitions;
Universal. These installations are suitable for various walls.

The manufacturer creates structures that can be placed in the most different places indoors - even under windows. For this purpose, equipment is intended, the height of which is up to 82 meters. Omega systems belong to this variety.

Designs from the Delta series can be attributed to the economy class, they are set at relatively low prices, but at the same time, in terms of quality, these structures are in no way inferior to other products from Geberit. The lower supports of such systems are reinforced, they are suitable for installation on plasterboard sheathing.

The Plattenbau collection is designed specifically for buyers from the CIS countries. Such structures can be installed in walls with plumbing shafts. The manufacturer takes into account the thickness of the walls, partitions. The depth of Plattenbau structures does not exceed 12 cm.

Products from the Duofix collection are also popular. These systems are designed specifically for drywall partitions. Hanging toilet bowls can be mounted on such structures. Such plumbing products are very convenient, because dust will not accumulate on the toilet leg.

The Duofix system can be installed in such a way that it is suitable for people with disabilities. The toilet is mounted so that the load is distributed on the side racks and on the floor. For this reason, you do not have to worry that the hanging product will fall.

Constructions from the Kombifix collection are very well suited for installation in front of or in brickwork. Such a system can be attached to the floor or to the wall.

Tools

Geberit structures can be installed independently, without the help of professionals.

To do this, you must first prepare all the tools necessary for work:

perforator, drills;
marker (to make markup);
building level;
cap keys;
plumb, tape measure.

frame construction

First you need to choose a place where the structure will be installed. picking up suitable installation, the thickness of the partition or wall should be taken into account. It will also be necessary to pay attention to the features of the sewerage system.

Installation work must be carried out in a certain order.

Assemble the frame. It will be necessary to make a frame of metal, where the movable fasteners are located. The drain tank will be fixed on them. Since the fasteners are floating, you can set a suitable height at which the sanitary ware will be fixed. The frame can withstand a very significant weight (up to 500 kg).
Then you need to install the tank. A small distance should be left between the wall and the tank (about 15 mm). Position the drain button at a distance of 100 cm from the floor.

Attach the assembled structure to the wall. For this you need to use building level. First, bring the frame to the wall and mark where you will make the mounting holes.
Lead the pipeline to the tank. The direction is lateral or top. It is better not to choose flexible hoses for connecting the tank, otherwise it is quite possible that these elements will fail in the shortest possible time. It is recommended to opt for plastic pipes.
Then the system must be connected to the sewer. For this, corrugation is used.

Check how the installation works. Inspect all connecting elements: there should be no leaks. If everything is in order, you can close the frame.
Carry out the installation of drywall boxes. The frame for the box must be metal profile. It is recommended to opt for drywall, which is highly resistant to moisture (especially in cases where there is both a bath and a toilet in the same room). It is better to choose sheets with a thickness of 10 mm. You can lay drywall in two layers. It is necessary to pre-cut all the necessary holes in the sheets.
Install a toilet. Installation can be carried out approximately ten days after the installation of the box. The sanitary ware should be installed on pins. You can clad the box before or after installing the toilet.

Installation of a block structure

The installation of a block system will take a minimum amount of time.

This work will need to be done in the following way.

Decide where exactly you will install the structure. It should be borne in mind that the axis of the structure must coincide with the axis of the room.

Mark where the tank will be. Usually the height does not exceed 100 cm. Screw the dowels at the same distance from the axis. Holes should be made with a puncher: then you need to hammer dowels into them.
Carry out the installation of the tank.
Mount the pins: the toilet will be attached to them. Attach a bowl to the plum. Clamps must be used to attach the hose.

Possible problems

Geberit products should be purchased from a branded or certified store. It is not recommended to choose designs that are too cheap or go to unreliable sellers, otherwise it is quite possible that you will receive a low-quality product.

Owners of Geberit systems sometimes face different situations.

The plumbing fixture starts to wobble. It is very easy to deal with this problem: you just need to correct the fasteners, tighten them;
Fluid stagnates in sewer drain. This means that the slope of the pipes is not correct. Usually it is 45 degrees;
The drain tank is leaking. In such a situation, it will be necessary to check whether the gaskets are installed correctly;
The toilet is leaking. It is possible that there is not enough sealant at the joints. To fix this problem, sand the seams and reuse the silicone.

The Geberit installation is used for the hidden connection of mounted plumbing to the water supply, electricity, and sewerage of the house. The installation may contain a flush tank, branch pipes, fittings for connection to the engineering systems of the building, flush keys, mixers for nozzles of a bidet built into the toilet bowl.

The installation system is a set of profiles rigidly interconnected into a single frame structure with the possibility of adjusting the spatial position individual elements. The installation is used for attaching suspended plumbing fixtures, hidden plumbing to toilet bowls, urinals, bidets, sinks, cold water and hot water communications, sewerage, and electrics.

The Swiss manufacturer Geberit produces installations for fixing the following types of plumbing and fixtures:

toilets and;
urinals, bidets;
washbasins, drains, kitchen sinks;
bathtubs, shower systems;
shower with sewerage in the wall;
supports, handrails for the disabled.

The frame structure is separated from the wall at some distance or mounted as an island, sheathed on the outside with sheet material. This allows you to hide pipes, cables, flexible hoses, and other elements of engineering systems inside it.

Users often get confused with the name of Geberit installations. The correct name frame construction is considered Geberit Duofix. However, the manufacturer initially uses several options for completing it with mounting elements for a specific plumbing equipment. Therefore, other names of his products appear in the title. The marking is deciphered frame structure in the following way:

In other words, in the frame structures of installation systems, the distance between uprights and horizontal bars. The frame can be reinforced with two side posts for fixing handrails for people with disabilities.

frame structure with handrails for the disabled.

In free-standing installations, racks are usually reinforced with additional elements. Key flush tank can go to the front surface of the structure or be located on top or at the end.

All these factors affect the time of installation installation, the complexity of the work, the selling price of the frame structure kit.

Installation of the Geberit installation

The installation for the toilet bowl is installed on a place prepared in advance for this. Special tool and no fixtures are required. A minimum qualification of a home master, a standard arsenal, usually available to the average user, is enough.

Tools

Each Geberit installation kit is designed with low installation time in mind. To do this, the number of fasteners is reduced, standard hardware is used, traditional technologies. Home master to install the installation on your own, you need a tool:

level - bubble or laser;
tape measure - maximum 3 m;
marker or construction pencil - any color visible on the surface of the walls, flooring;
perforator - chipper, drilling, impact drilling mode;
head set or wrenches- 10 - 17 mm;
screwdriver - cordless or mains;
screwdrivers - cross-shaped, flat;
hacksaw - a blade for metal or plastic.

Attention: At the stage of rough finishing, you will need a clerical or carpentry knife "jamb" for cutting sheet material with which the tubular frame is sheathed. Holes for pipes in drywall can be cut with a knife or drilled with crowns.

Training

Before buying a Geberit installation, you need to consider the nuances:

The main task of the installation is a hidden wiring of communications, so everything engineering systems should be behind its tubular frame. That is, if pipes come out of an installation sheathed with plasterboard, tiled, there is no point in installing it.

Therefore, several options for implementing projects with installations are used:

Attention: Shutoff valves and water meters in 90% of cases are located near the toilet, for which the installation is used. They need access, so it is necessary to leave a place near the frame for a revision plumbing hatch.

Frame structures are fixed at least two points to the floor and two points to the wall. This allows you to withstand from 500 kg of operational load in the process of using suspended plumbing.

Installation of the frame structure

V this example the Geberit installation was integrated into a false plasterboard panel, reaching the height of the window sill.

The sequence of actions for transforming the interior is as follows:

dismantling of existing plumbing;
dismantling of facings of enclosing structures;
assembly of the frame structure;
the bottom stop is set at a height of 100 mm from the floor;
adjusting the height of the structure - 1 m to the upper mark on the right rack of the installation;
horizontal level adjustment;
marking the fastening of the upper supports to the wall;
markings for fastening the lower stops;
drilling blind holes for fasteners;
holes are filled with liquid nails to fix hardware;
Application of adhesive on the surface of the holes.
installation of polymer dowels in holes;
Installation of plastic dowels.
reapplying adhesive composition;
Refill with glue.
installation of a frame structure at the place of operation;
Mounting the installation in place.
fixing stops with anchors in dowels;
Fixing with anchors stops.
adjustment of the frame distance horizontally;
Correction of the vertical position of the frame.
installation of sewer outlet 90°;
Installation of a branch pipe for connection to the sewerage.
installation of studs for fixing the toilet bowl and the upper pipe from the flush tank;
connection of the flush tank to the cold water supply;
Installation of corrugations from the water supply to the flush tank.
wiring communications inside the flush tank;
Connecting hoses to the flush system.
installation of a panel with flush keys;

At this point, the installation of the Geberit installation is considered complete.

The manufacturer has provided three options for connecting the flush tank to the water supply - right, top, left. The outlet of the pipes to the outside is adjustable.

sheathing

After installation, the Geberit installation is checked for functionality without a toilet. To do this, water is drawn into the tank, at the same time, the water level inside it is adjusted. Then, a small, large, general (cascade) flush is carried out into a bucket of sufficient volume, depending on the modification of the tank.

Only after that you can decorate the installation:

galvanized profiles-racks are attached to the wall;
GKL sheet is attached to the frame and profiles with self-tapping screws;

The corrugated part of the pipes is cut to length, taking into account the thickness of the wall cladding (usually tiles + a layer of tile adhesive).

After finishing the walls with tiles, wallpaper, flexible stone, cork, panels, etc. facing materials a toilet bowl is put on the studs, fastened with nuts with polymer washers.

This method of installation provides high maintainability of plumbing and cladding. However, if the water supply breaks, you will have to dismantle the drywall in the emergency area.

Details about the sheathing of the installation with drywall.

Possible problems

When installing a Geberit installation, the following problems may arise due to the low qualifications of the builders of the building, finishers, plumbers, and the home master himself:

With a high cross, the installation is usually shifted sideways from it to solve the problem:

By changing the bending angles, it is possible to connect the outlet pipe of the toilet with the hole of the sewer cross with three bends, almost at the same horizontal level. In this case, the design of the installation should be taken into account.

V regular system Geberit Duofix mounts of the rack are single, the regular elbow with corrugation (black) can be scrolled towards the cross at any angle for docking with two other bends of the considered option.

In a reinforced type installation, two racks are used, the length of the standard outlet is not enough for rotation, it can only be mounted vertically.

The double frame of the reinforced installation does not allow the nozzle to be rotated.

In this case, a 120 degree elbow is used instead, as shown in the lower figure.

When cutting standard pipes - a diameter of 40 mm for a drain tank, 110 mm for a sewer, it should be noted that their length is different. The drain is closer to the sewer outlet. Therefore, it is better to cut the bends from the installation kit last - after plasterboard and tile sheathing, immediately before installing the toilet bowl.

Plastic adjusting pins for attaching the button are also cut off after the box is tiled.

Thus, the installation of the Geberit DuoFix installation system can be carried out in-house. Avoid mistakes, follow the instructions contained in each installation kit.

The Swiss company Geberit has been successfully manufacturing and selling various sanitary equipment for many years.

For example, the company produces components for flush tanks, supplying parts for various global concerns, as well as independently creating finished products.

The Geberit toilet system is very popular. High performance and reasonable cost make these devices very popular in the market.

More about fittings

Construction ( drain valve Geberit, located in the toilet bowl, works when flushing occurs. The drain mechanism consists of the following elements:

A tank is a container in which water is stored. The water hose can be connected either from below or from the side. As a rule, the volume of the tank is about 8-10 liters.
The locking system is a mechanism responsible for filling the tank, as well as stopping the water supply when its level reaches a predetermined maximum.
Flushing system - works when the button is pressed or the lever of the button is raised - depending on design features execution.

Lever models are now produced less and less - they are being replaced by modern push-button models, which are more convenient, look more beautiful and allow the use of flush modes. When exposed to the button (lever), a hole opens through which water from the tank enters the toilet bowl. The opening closes when the container is empty.

Almost always the system is offered as a kit, already assembled and ready for operation. If it fails, it can be replaced separately.

It should be borne in mind that if Geberit was installed, then you need to change it to the same one.

The drain system consists of two main elements: a lever and a siphon. The latter is needed to prevent water leakage: it closes the drain hole. As a rule, the type of siphon resembles a plunger.

The button lever activates the siphon, which rises and opens the drain.

V Lately appeared additional element, which is connected to the button (as mentioned above). Pressing it activates the button lever, which raises the siphon.

Moreover, many models are equipped with double buttons - which allow you to empty the tank completely (when fully pressed) or partially (respectively, with partial).

Product classification

One way to classify the drain mechanism is the material of manufacture. The most common are plastic and bronze. These types of products do a great job with the tasks assigned to them.

The use of such materials is relevant for the reason that they are neutral to corrosion under the influence of moisture (unlike metal structures).

Geberite are high-quality plastic elements, and in terms of strength characteristics they are almost as good as bronze.

Can also be classified drain mechanism(tank) by design features:

push-button - modern solution: draining occurs by pressing the button (tank);
exhaust (lever) - an outdated example when you need to pull the lever rod up.

Installation (push-button options) is divided into types:

full descent - when the button is pressed, the entire volume of the tank is drained;
dual-mode use - the button is divided into two parts, which makes it possible to use only a part of the volume of water in the tank: the first time you press the water starts, and the second - the supply to the tank stops.

In addition to the options considered, there is another modern solution - installation. This integrated system for concealed installation sanitary equipment.

Due to the special design, a number of advantages are formed:

communications are aesthetically hidden;
the space in the bathroom is saved - which is very important, given that the space in them is often very, very small;
plumbing fixtures - suspended;
simple installation and adjustment of Geberit fittings.

The installation distinguishes between two types of installations:

block - a tank with a mount; implies fixation on the main wall, the elements are hidden in a niche, only a drain button and leads for connecting communications are displayed;
frame - allows installation on the main walls, as well as on the tank or its partitions. There is corner models: with fastening on two walls.

The block system costs less, but the frame system opens up more possibilities for use.

Frame fittings (installation) for the Geberit toilet bowl are produced in three types:

universal;
for installation on lightweight walls, such as plasterboard;
to fix on load-bearing walls, for example, brick.

With regard to Geberit installation systems, two main groups of devices can be distinguished:

for sinks, urinals - a universal option for connecting plumbing equipment from different manufacturers;
for wall hung toilets- flushing tank and key.

Nuances of choice

You need to choose drain fittings, focusing on the toilet model. After all, the solution must be approached constructively - different models cannot be docked in any way.

So, if the use of a classic toilet bowl is supposed to be used, then the appropriate drain fittings should be selected. In this case, you can count on the reliability of products whose design has been tested over many years of operation.

If a more modern solution is used - installation, it is worth considering the features of the conditions in which the installation and configuration of Geberit fittings and the system as a whole will take place.

In this case, you can use a device that allows you to control it contactlessly, only approaching or moving away from the sensors.

An important factor when choosing is the price. The cost of conventional Geberit fittings is around $25. As for installations, in this case, of course, the price will be slightly higher - about $200.

In fact, this criterion is deterrent when choosing the right fittings, as well as all plumbing equipment.

Otherwise, installations outperform classical solutions in terms of aesthetics, ergonomics, functionality and durability.

Installation nuances (video)

Mechanism setting

The finished toilet bowl offered in the store always comes with the fittings installed and configured. However, in some cases, you may need to configure it yourself.

This can happen when replacing - installing an entire new node or its individual parts.

There is nothing particularly complicated about this - so it is not necessary to call a plumber to carry out such work (and he will need to pay at least $ 5-10 for such work).

Now - actually, to how exactly this work is performed. Initially, consider how to properly adjust the height of the valve:

The rod is disconnected from the overflow pipe.
The latch holding the "glass" is pressed out.
Rack - Moves up or down as needed.

Now let's figure out in what sequence the water level in the tank is adjusted:

The position of the “glass” changes - it must either be raised or lowered. In this case, there must be at least 45 mm distance from the top of the part to the upper edge of the container.
Overflow tube - installed above maximum level liquids, at least 20 mm higher. At the same time, it should be lower than the top of the rack - at least 70 mm.

If you want to set up a partial drain (in push-button models), you need to move its float higher or lower (relative to the overflow tube). An example is in the video below.

For the same procedure, only performed for complete draining, you need to move the damper itself (relative to the “glass”) - an example in the video below.

From such an adjustment, the amount of water that will be washed off when the button is pressed will change (up or down).

The Swiss company Geberit manufactures and supplies several models of installations to the Russian market. Compact designs are popular with consumers due to their reliability, aesthetics and ease of installation.

Features of the Geberit installation

Installation Geberit

The Geberit installation is available in two types of designs and three product lines. Block is designed for installation in a niche of main walls. Frame consists of a rectangular steel frame and accessories. Can be attached anywhere.

The Geberit WC system is available in three versions: "Sigma", "Omega" and "Delta".

Sigma is a premium line. The consumer is offered a wide range design solutions keys: from durable plastic to gilding. Delta is a budget offer with a limited set of buttons, there are no special differences in functionality. Geberit Omega is designed for installation under the window in private houses with pitched roofs.

The Delta and Sigma series are available in different options: ultra-thin 8 cm, standard 12 cm, for people with disabilities. The Plattenbau modification is designed for panel houses.

All Geberit products are distinguished by the following advantages:

saves space in the bathroom;
allows installation in any convenient place;
the possibility of selection for any apartment and private house.

The installation can be purchased complete with a toilet bowl.

Popular Models

Model “Geberit Duofix UP100 458.103.00.1”

A wide range of Geberit products is presented on the domestic market, popular models:

Geberit Duofix UP100 458.103.00.1 is attached to the wall and floor, has a top bar on the frame, on which a shelf can be built. The flush key is sold separately. There is a variation without the top bar.
Plattenbau 458.125.21.1 - a set for panel houses. Features of the model - in fixing the frame to the wall. Fasteners include studs 50 cm long and a special top bar, which allows installation around the pipes of the plumbing shaft.
Geberit Duofix UP320 111.300.00.5 belongs to the Sigma line. It has the ability to connect a wide range of flush keys in any design. Provides three types of control to choose from: pneumatic, mechanical or touch. Installation is carried out in a profile, there are no wall fasteners in the package.
Geberit Duofix UP320 Plattnebau 111.362.00.5 belongs to the Sigma premium line. It combines the possibilities of concealed installation together with a variety of design solutions.

The presented models differ in the type of frame structure and assignment to the budget or premium segment, depending on the control variations and the connection of the keys.

The standard equipment for the Geberit WC installation includes connecting pipes, frame fastening, shut-off valve, plugs, threaded studs, fasteners.

How to choose the right design

Choice suitable model carried out according to the following criteria:

Type of building envelope. For panel, only Plattnebau is suitable.
Mounting option - in the floor, load-bearing or non-capital wall, under the window.
Toilet dimensions. Basically, the models are presented with a width of 50 cm, a height of 112 cm, a depth of 8-12 cm. For persons with disabilities, the frame has a double width.
Price. Choice of budget or premium package.
Full or limited feature set.

The Geberit installation can be supplied with a complete toilet, include basic keys, a certain type of control.

Mounting and connection methods

Assembly of the structure

Mounting methods depend on the type of construction. To install a block and frame installation, a marker, a set of plumbing keys, and a puncher are required.

The block variant installation process consists of the following steps:

Determine installation location. For a standard bathroom, this is a niche with a riser or a wall behind which it is located. Previously, the riser or outlet to it must be replaced with a metal-plastic one.
Make markings according to the dimensions of the frame.
Mark the height for fixing the dowels. Exact dimensions indicated in the instructions.
Punch holes in the wall with a puncher and fix the dowels.
Mount the drain tank, connect the hose and tighten the necessary fasteners.
Connect water.
Check how water is collected and flushed into the toilet.

The frame installation is mounted as follows:

Assemble the frame. V ready-made the frame will have a height of 1.3 to 1.4 m.
Fasten the tank. Place the drain button at a height of 1 m from the floor, a wall-mounted toilet - at a height of up to 0.45 m, sewer outlet- at a height of 0.25 m.
When installing, use a level, otherwise the drain system will be disturbed. Set the level vertically, mark the holes for attaching the frame.
Punch holes for fasteners with a puncher. Mount the frame on the dowels to the floor and to the wall.
Connect the water supply to the drain tank.
Connect the riser to the toilet outlet.
Tighten fasteners, check tightness.
Cut to size the drywall to cover the frame.
Fix drywall and make finishing tile or other material.
Hang a toilet.

exploit installed design possible in a week.

The main types of breakdowns and how to avoid them

The following problems may occur:

Drain tank leak. In this case, you need to check the correct installation of the gaskets.
Toilet leak. The joints are most likely poorly covered with sealant. It is necessary to clean the seams and reuse silicone.
Toilet wobble. To solve the problem, you need to tighten the fasteners.
Stagnation in the drain of the sewerage water. The slope of the pipes does not correspond to the recommended 45 degrees. You will have to dismantle and front the angle of inclination.

It is better to entrust the installation and correction of problems to a specialist in order to avoid errors.