How to open the lock: a few simple ways. Recommendations: how to open the lock without a key

Quite often, parents install slamming locks to prevent the child from accessing a certain room, but the opposite effect is not ruled out. In other words, the security properties work quite well, but they can close at the moment when the child is in the room, access to which is limited and the door should be opened as quickly as possible. How to crack an interior door on your own and not turn to specialists in such activities? To do this, pay attention to the recommendations below.

Did the door to the room slam shut or the owner lost the keys? The child was able to slam the door and stayed in the bathroom or toilet and cannot get out? What to do, and how exactly to get the baby out of the room quickly and without harm to the keyhole? Worth using the most traditional way– a master key suitable for mortise locks. With master keys, you can open a room keyhole, but where can I get it?

They are sold in stores, but to speed up the process, you can make it yourself at home:

You need to take 2 paper clips.
The long end unbends in one clip.
In the second paperclip, the long tip must be unbent at an angle of 90ᵒ. This will be a homemade tensioner, through which the lock will turn.

The tensioner is inserted into the keyhole larva, pressed or, in other words, tension is created, pressure is fixed and rotation is carried out. Using another paper clip, it is worth feeling for the pin. As a rule, there are 5 of them in the castle. At correct location paperclips, they can be opened.

Pressing on the pins must be carried out from the farthest, and as soon as the paper clip puts it in the desired position, there will be a click.

After 5 clicks are heard, the tensioner turns and the lock opens. So you can break open the doors in the toilet and other rooms, but this way is not universal.

Instructions: how to open a lever lock

Opening an English level door lock is not easy, but possible. It consists of many grooves, recesses. To lock or lock a door with such a lock, you need a key in the shape of a butterfly. It got its name because of its original look, however, if it is absent, and you need to unlock the door closed from the outside, then you will have to try a lot.

A lock with a high class of burglary resistance is installed mainly on expensive metal doors.

As a rule, the degree of protection that the lock is equipped with depends on how many plates are installed in it. In addition to the standard protection, they have an additional one, and this can be a magnetic element in the form of a shutter. It is not recommended for a non-professional to open such a door, since the lever is a particularly complex mechanism. It is permissible to use a special roll.

For this:

The tip of a thin screwdriver is bent, which will become a kind of roll;
The needle at the tip is bent in the form of a hook, which will become a master key;
The roll is inserted parallel to the master key into the keyhole larva.

The roll must be pushed all the way, turn it and fix it. Next, a gradual shift of the hook and a shift of each plate are carried out, while a gradual rotation of the roll is required. If the latch was able to be opened, then the plates succumbed, but this may still indicate that the lock was of poor quality, and the opening can be carried out not only by the owner of the house in an emergency, but also by any intruder.

How to open a door lock without a key

Have you ever seen a closed door in front of you? There are many reasons why this could happen. Be it a draft, a child, an animal, or just the door bounced off the wall when it was opened hard. If we are talking about a child, then leaving him in a room alone is categorically not desirable, this can lead to even more serious consequences.

In order to open a Chinese or any other door, if the core of the lock is jammed, you will need:

Inspection of the keyhole;
Selection of the necessary device;
Careful opening so as not to violate the integrity of the keyhole.

If the keyhole is round, then it is opened with a knitting needle, a large straightened paper clip, an awl or a toothpick. It is necessary to insert a thin device into the opening, press and turn, and not a tool, but a handle. The door will become unlocked in just a couple of movements, and subsequently it can be closed again, since the lock will remain intact.

If the keyhole flat view, then you will need to use scissors, a knife with a narrow blade, nail files, pens, a teaspoon. The principle of operation is the same.

We decide how to open a door with a cylinder lock

A cylinder lock is installed mainly on a gate or front door, and that is why it must be as strong as possible, with anti-burglary and not amenable to any improvised means for opening.

Cylinder lock open:

Hard;
It is almost impossible for a non-specialist;
It will not work with a knife, with a pen, with a hairpin or using a wooden stick.

For targeted hacking of such a tool, a set of special tools, a specific screwdriver, as well as carefully carrying out each stage of unlocking. An intelligent opening of such locks is required, or to be more precise, high-quality manipulation of several objects at once. By means of a specially made pin, the secret is closed and rotated to the correct position.

Doors can slam due to a broken handle. How to open the room in this case? You will have to completely disassemble the handle, and for this, a screwdriver, a pen or a nail file will do. You can use a knife. The screws are unscrewed, the mechanism is groped and turned. Attention should be paid to the fact that the cause of this situation is the door hitting the wall, which automatically breaks the handle and blocks the lock.

Sometimes you gotta know how to break the door

Broke lock? It can be noted that you are simply unrealistically lucky. Such locks are unique in that they are anti-vandal, since they are not afraid of a rough impact, but if you apply intelligent manipulations, you can open the door in a minimum amount of time. First you need to prepare the door opening mechanism without a key by lubricating the well with oil.

A wedge key may be used.
You can open the lock by pushing the door.

How to find the wedge key? It is enough just to pick up a real wooden peg, only suitable in size for the keyhole opening. It is best to choose a soft wood species. The peg is literally hammered into the lock and pulled out.

Notches will remain on the peg, like a real key, which means that the wedge can be used like a regular standard unlocking key.

The rack type lock is installed in such a way that it is possible to open the door due to strong squeezing. A crowbar must be inserted between the jambs and the door and at this moment a push-up is performed.

How to open an interior door without a key

It is unlikely that using improvised means, you can become a professional door breaker, however, if you research in advance various options opening keyholes, you can significantly simplify your life if the door slams shut and you have to open it without a key and in emergency mode.

Advice:

Interior doors without a key can be opened with a long ruler or a knife. To do this, the selected object is taken, it is pushed into the slot above the place where the crossbar is located and moves from side to side. The method is fast and hassle-free.
Few people can believe, but it is plastic credit card can become the very assistant in opening the door. The method is not very effective and even possibly extreme, but it has a lot of positive reviews. For hacking, it is worth swiping the card along the keyhole, but only if the tongue has simple design. In complex keyholes, this option will not be appropriate.
There are locks on the doors that are installed in the handle and have a special button. It can be blocked by a strong jerk of the door, again, from hitting the wall when opening, or simply due to a malfunction of the mechanism. In order to open the lock, you will need to use a carnation, knitting needles or hairpins. They are inserted into the keyhole hole, due to which the key is pushed outward and the door is opened.

If all the above methods are not effective or not suitable, then there is one more radical option. It consists in using a chisel, which is hammered into the opening between the door and door frame. It is driven in as deep as possible with a hammer and a number of attempts are made to wring out the tongue of the lock. In this case, you can damage the door, but you can open the lock, but it will also have to be repaired later.

How to open a lock without a key (video)

Such knowledge can be especially useful for those who have small children at home, since there are no such locking mechanisms that can be serviceable for a long time, and in order to sometimes quickly open them, you need to resort to simple methods using improvised means.

If the key is lost or broken and there is no duplicate, opening the door lock may be the only way to get inside the room. There are two ways to resolve this situation: try to open the door yourself, or contact a commercial company that provides such services. There is another option: to invite a locksmith from the Housing Office, but in this case you can’t count on a quick result, because first you have to fill out an application for a call, and then be patient and wait for the visit of the master, the only one for the quarter. It will not be easy to open the lock on your own, especially when it comes to the front door, on which two locks are installed. Let's take a closer look at all the possible options.

Opening an interior door causes the least problems, since simple locks are often installed in such structures. Such designs are equipped with a latch on the one hand, and a keyhole on the other. Parents of inquisitive kids often have to deal with this problem. A child can easily slam the door and turn the handle, but the reverse process can be difficult for him. Then parents face two tasks at once: how to open the lock, and how to keep the door itself safe and sound. Here's what to do in this situation:

examine the design of the castle, the shape of the well;
pick up a tool that can be inserted inside the well;
carefully open the door, being careful not to damage the canvas and the lock.

The choice of tool depends on the shape of the keyhole. If it is round, then you will need a thin solid object: an awl, a straightened paper clip, a knitting needle or a toothpick. For a well with an elongated shape, you will need something flat: a screwdriver, a nail file, scissors or a knife. To open the door lock, you must insert the tool into the well. Pressing on it, turn door handle. The main thing is not to overdo it so that the tool does not break and get stuck in the well.

There is another way to open a slammed door. To do this, a flat object is inserted between the end of the door and the box, with which you need to slightly push the latch towards the lock. It is enough to move it just a few millimeters.

If the lock has a well on each side, and an inserted key remains in one of them, it will not be difficult to deal with the problem if the design does not provide for a threshold. Under the door you need to push the spread out newspaper as far as possible. Then we push the key out of the well with a sharp object, which should fall on the newspaper. We take it out and open the door.

Opening entrance doors

More difficult task is the opening of entrance doors, since they usually have at least two locks. It is worth thinking carefully before trying to solve such a problem on your own: an unprofessional approach can adversely affect the state of the door itself, and replacing a metal entrance structure is not a cheap pleasure. When you get started, remember that the main objective– open locked locks, not break the door.

The process of this event will depend mainly on the type of castle. If a broken key became the reason for opening the door, you must first remove the chip from the larva. To do this, first pour a few drops of lubricant into the keyhole: WD-40 or engine oil. It will take 15–20 minutes for it to spread evenly over the well, after which the chip can be removed. If a small part of the debris protrudes, this simplifies the task. It should be carefully hooked with pliers or tweezers and, swinging from side to side, pull it out. If it is not possible to hook a chip on the outside, two thin objects will be required, for example, an awl. We grab the stuck part with the tips, swing it and try to move it. When the chip is removed, you will open the door to the apartment very soon: good master will make a duplicate of the two broken halves, and this will solve the problem.

Now let's look at ways to open the door without a key if the key has been lost and it is not possible to make a duplicate.

Options for opening a cylinder lock

If you set the task to open cylinder lock and keep it in working condition at the same time, then you need to have virtuoso abilities as a cracker. Such devices have high level secrecy, but experienced craftsman it will be easy to open the cylinder lock with a hairpin or an ordinary paper clip, however, it would be more convenient to use master keys. Consider an emergency option: how to open a door lock with a paper clip. We will use it as a master key, but we will also need a “fold”, which will serve as a screwdriver. The task is to straighten the paper clip, slightly crochet the edge and insert it into the larva. Now you have to focus on hearing. Our task: to put the pins of the secret mechanism in the correct position. They must be lifted in turn, using an impromptu master key and a roll. As already noted, this is a very difficult task, which is almost impossible to cope with without proper skills.

There is a less delicate but more affordable way break the door lock. It will require tools: an electric drill with a drill designed for metal, a flat screwdriver and a hammer. Sometimes the lock can be cracked without drilling, so you should first try this option:

insert a flat screwdriver into the larva as deep as possible;
with considerable effort, try to turn the screwdriver inside the lock;
on a successful attempt to pull out the screwdriver, along with which the secret should be removed.

This task is completed - the door can be opened. If this method was unsuccessful, you will have to take a drill. We direct the drill directly into the larva and drill until we have gone through the whole secret to the end. After that, we take out the larva and open the door.

It is important! The method of drilling or knocking out a cylinder lock is completely powerless if the device has burglary protection.

Ways to open a lever lock

Using master keys Drilling

The lever mechanism can be broken or you can try to open it in a delicate way.

To break the lock, it is necessary to remove the main pin of the structure, which is responsible for moving the levers. To do this, you need a drill with a drill for metal, a hook or a bent strong wire, a paper clip. But even with a tool, this task will not be easy, since you need to drill strictly in the place where the reference point of the secret mechanism is located. When it is drilled, you need to insert a bent hook into the hole and turn it. In this case, all levers move freely, and the door can be opened. As in the case of cylinder mechanisms, this method is completely ineffective for locks that have protection against picking.

Now let's look at how to open a door lock with a lever lock using master keys or items that can replace them: paper clips, hairpins, pins. The opening of lever door locks is performed with two master keys. The first is inserted into the keyhole until it stops against the main board. The second one must alternately select the desired position of the levers so that the main pin moves. You should be prepared for the fact that this process can take a lot of time and end in complete failure if you have never opened locks before. Therefore, it is more expedient to invite specialists after all.

How to open a rack lock

If a rack mechanism is installed on the entrance structure, it will not be very difficult to open the door lock without a key. Since the rack lock is well protected from rough impact, we will not consider options for how to crack the front door. With a normal tool at hand, we can carefully open the mechanism in one of three ways.

Take two flat screwdrivers. They must be thin in order to freely enter the well at the same time. First, we put one screwdriver into the well. We need to put it on the notch of the crossbar and move it to the side. Then we insert the second screwdriver and with its help we fix the position of the crossbar. Repeat these steps until the lock is open.
We can open front door door locks using wooden wedge key. For its manufacture, we need a wooden wedge made of soft wood. In size, it must correspond to the parameters of the well. The wedge must be driven into the well, then pulled out. Notches will be visible on the surface of the wood. We'll have to cut the wood a little to make it look like a key and open the door.
This option is available only if there is a distance between the door leaf and the frame where the crowbar can be inserted. The tool is placed in the gap between the jamb and the door, then wring it out until it stops. We have a gap where you can insert a flat screwdriver and move the crossbars inside the lock with it.

Opening a padlock

Method 1 Method 2 Method 3

Padlocks do not have great strength, but quite often they are used to protect utility rooms, sheds, basements. If the keys are lost, such locks are usually picked because they are of little value. Here's how to break padlocks:

Take two open-end keys and insert them in such a way that each of them captures one lock shackle. In this case, the keys must be in contact with the side ribs. The free edges of the keys must be pulled together. As a result, part of the lock near the latch breaks.
We cut out a small plate from a tin can, bend one edge. With the uncurved side, we insert the workpiece into the slot, which separates the lock body and the opening shackle. Push the plate inward with a screwdriver. As a result, the latch opens.
For the third option, we need a self-tapping screw and a nail puller. We screw the self-tapping screw into the lock cylinder, then we hook it with a nail puller and pull out the cylinder.

Conclusion

Losing your keys is not a reason to panic, but it's also not the best time to urgently master the skills of a locksmith. Opening doors without a key, even if you have the right tool at hand, is not an easy task. Inept handling of the lock can only aggravate the situation. If you are not confident in your abilities, it would be advisable to contact a specialized company whose specialists have everything necessary equipment and they know exactly how to open the front door without a key, so as not to spoil the door and lock.

There are many reasons why the lock does not open: breakage or loss of the key, clogging of the mechanism, subsidence door leaf other. It is better to entrust the problem to a specialist, but what to do if the master is busy or the breakdown occurred in dark time days? You can solve the problem yourself if you understand the types of castle and their weak points. There are several true household ways open if it is not possible to use the key.

If it is not known with what type of mechanism a breakdown occurred, you can take the following steps to open it (intruders often use these methods):

To pick up a key - it will work only with a cylinder mechanism.
Use a lockpick.
Drill - comb out the pins and try to open with a screwdriver.
Spin - move the door to the left and press (to secure the lock, you need to install a one-piece bent frame).
Remove the hardware and try using a screwdriver.
Acid - a special substance is poured into the hole, the door lends itself.

If the key is lost, you should not try to open the lock with the help of someone else, which at first glance fits: it will most likely get stuck and the problem will only gain momentum.

Types of lock mechanisms and types of keys

To open the lock mechanism without a key with minimal damage, you need to understand the type of lock, its device and then pick up necessary way autopsy.

In modern iron doors install two types of locks:

Mortise - the mechanism box is installed in the middle of the door leaf (which partially violates it);
Inset - differs from the first in that the lock is installed before the doors are assembled.

With regard to the mechanisms used, metal doors most often used:

Level - consists of plates, which, when the key is turned, become in a certain sequence (the more there are, the more reliable the device;
Cylinder (pin) - consists of blocks (washers, pins) that, when turned, act on the crossbars and the door opens.

Pin mechanisms are divided into secrecy groups:

Low secrecy (up to 10 thousand) - easy to open with master keys. Key type two and one-sided English (butterfly key), cross.
Medium (up to 5 million combinations) - opens with a punch card type.
High (more than 100 billion) - punched card and Finnish key.

Lever mechanisms are opened with a butterfly key. The degree of protection directly depends on the quality, and the quality, in turn, on the price.

Opening of cylinder mechanisms

To begin with, we will talk about cylinder (pin) types of locking mechanism.

The easiest way to open the "English key" type (butterfly key):

Find a hairpin, paper clip or piece of wire and divide it into 2 parts.
Bend at a right angle, (the bent tip should fit freely into the well).
With a bent wire, make a tension in the upper part of the mechanism in the direction in which the key turns.
With the straight part of the stud (wire), lift all the pins in turn.
Turn the bent part of the wire.

The same technique is used to break a lock with a double-sided English mechanism, except that in addition to the upper ones, the lower pins must be lowered.

The cross-type lock mechanism can be opened with a screwdriver. Action algorithm:

Remove the outer part;
Instead of a key, turn the screwdriver several times in the right direction (to scratch the pins).

The Finnish type of lock mechanism is one of the most reliable, it is not so easy to open it, even with the help of professional master keys. If this is not an expensive device, you can remove the outer part of the mechanism, pull out the plates and then try to open it with a screwdriver. If the model is expensive, more drastic measures are needed (for example, calling rescuers).

Hacking lever and tongue locks

Lever locks are very popular thanks to high degree reliability. To open such a mechanism without a key, you must:

Find a similar key, a heavy object to hit;
Insert the key at 75%, pull and strike.

It may not work the first time, but the method is reliable.

Another type of lever lock - single-row and double-row "laser" requires a different approach to solving the problem:

Find a small metal plate, scissors (for metal), pliers.
Cut out a semblance of a key from a segment, make waves with pliers.
Insert all the way;
To turn.

The first method is also suitable for solving problems with a pump lock - it is often used to protect a garage or driveway.

There are more elementary locks, but no less problematic when opened.

Tongue lock: you can use it like in a movie plastic card, but most likely the door will not open, and the card will break. It is better to use a metal plate, a screwdriver, a flat rod - the main thing is that the device crawls into the opening between the door frame and the canvas. If it works, you need to press down the tongue and push the door.

The lock with a latch can be opened in this way: remove the handle (you need to find a tool to unscrew the bolts), dismantle the plate that hides the core of the lock. Then feel for the latch, push and turn the door handle mount.

Broken key: what to do

There are disappointments in life: the key is broken and stuck in the keyhole. To solve the problem, you need hands and a set of tools:

The scrap is small.
Screwdriver Set.
Bulgarian.
Drill.
Nail file.

This and other ways to open the lock on the video:

This is a complete set of tools to solve the problem. Perhaps only a nail file or a screwdriver will come in handy.

The process of removing the key with a jigsaw file consists of the following actions:

Insert the nail file with the teeth up;
Slowly move, prying the key;
Pull out the file with the key.

If after the procedure the lock still does not open, the mechanism may have been damaged.

If you come across a butterfly lock, in addition to the aforementioned opening method, you can try this:

Make a hole above the well with a drill.
Neutralize larvae.
Hook the mechanism so that the crossbars move inward;
If it didn’t work out, you can cut them with a grinder.

If the door has backlashes, you can pry it off with a screwdriver, press it down - it will suddenly give in.

Whatever happens, you should not try to get into the room through the balcony of the neighbors - it is better then to pay for the call of a locksmith if you didn’t manage to open it yourself.

Surely each of us at least once in his life lost the key to the front door. When you see a door in front of you that closes access to a house or other room, you begin to think about how to get inside without having a key. To make it easier to understand, you first need to evaluate the design of the door, because on all models there are different types castles. Below you will learn about the most common methods to get into locked rooms without a key. However, I would like to remind you that for successful solution For this task, you will need some experience.

Is it possible to unlock the lock with your own hands if there is no key?

If you are left without a key and you urgently need to open the door, then there is no need to panic. Try to evaluate the problem. After all, when a flimsy interior door blocks the entrance, it can often be unlocked without a certain skill. But if you have to deal with metal front door from well-known manufacturer, then here even a specialist will have to sweat. If you are not sure of success, then do not waste time and effort and spoil the design doors with hand tools. In such situations, it is recommended to entrust this work to professionals.

If a specialist is taken to work, then he will be able to open the lock of any design. He is familiar with the features of many locking mechanisms, so it will not be difficult for him to unlock the door in an intelligent way, keeping the lock mechanism intact. Therefore, deciding to use the services of a specialist, it will not always be a reasonable decision. Reliability of some models may be imaginary, and therefore, if we have necessary tools, then you can open them quickly enough. We will talk about the most accessible of them further.

Opening the locking device of the interior door

How to open a lock without keys without resorting to the help of a professional? If you are dealing with interior door, then it will not be difficult for you to open it. Most often, such door blocks equipped with locking mechanisms, in the design of which a latch is provided on one side, and on the other there is a part resembling a keyhole. Given that these doors are rarely locked, owners lose their keys in the first weeks or months after installation.

Often the door is locked due to the carelessness of young children. Once in the room, they can slam the door, close the latch and, contrary to the persuasion of adults, do not want to open the door. Naturally, parents are afraid for their baby, as he remains alone in the room. Because of this, it is important to open the lock as quickly as possible so that it retains its working condition afterwards. You can solve this problem by performing the following operations.

find the keyhole and familiarize yourself with its design;
find a tool that is suitable for opening the lock;
start opening the door, doing everything very carefully.

How to open locks of different shapes?

There are such models of locks in which the well has a round shape. In this case, to open it, it is best to find a thin knitting needle, a large open paper clip, an awl or a toothpick. Having decided on a suitable tool, place it in the hole, after which push lightly with one hand and at the same time start releasing with the other hand or turn the knob. If everything is done correctly, the door will open.

The same should be done in a situation where the lock well has a flat shape. In order for you to be able to handle this lock, you will need to find a flat tool. For this purpose, you can use sharp scissors, a narrow-bladed knife, a nail file, or the handle of a teaspoon. Having chosen a tool, you need to stick it into the well, then press it with one hand and at the same time with the other we start to twist it and lower the door handle.

Unlocking the cylinder lock without a key

Great difficulties can arise if the locked door is equipped with a cylinder lock. Given the great secrecy of such locking devices, intelligent methods of opening will not always help to solve the problem. Although with experience, you can get inside if you use a paperclip or a very thin, curved screwdriver.

If we talk in more detail about the intelligent method of breaking cylinder locking mechanisms, then here from a person you need to perform certain actions with a paper clip and a screwdriver, where the first will be used as a master key, and the second will act as a fold. When trying to open a lock with such methods, keep in mind that here is the most important point- insert the hook well in such a way that the fonts of the secret take the correct position. They must be placed in turn, all the time helping with a roll. With due perseverance, the larva will begin to be sold. To understand if the fonts are installed correctly, you need to visually assess their location relative to each other and focus on the sound.

Using a paper clip, you need to move all the pins one by one, helping with a roll. And each time you need to check whether the cylinder can be rotated. Only when he starts to give in, you will be able to solve your problem. Pay attention to what what sounds come from the well while working on opening the lock. So you can stop in time if you do something wrong. Otherwise, you can simply break it.

Using the rough method

If a homemade master key did not help to cope with the lock, you can turn to a more rough method of breaking. However, here there is one important nuance : you can count on success only if the larval lock does not have protection against folding and drilling. If you decide to use this method, then you need to prepare the following tools:

electric drill - preferably as much power as possible;
drill for metal;
thick flat screwdriver;
hammer.

Immediately get ready for the fact that after applying such a hacking method, it will be necessary to install a new larva. First, try a powerful roll. To do this, take a screwdriver and place it in the lock as far as possible. You can even put a couple of blows on it with a hammer. After that, we begin to screw it. Realizing that the larva begins to spin after the screwdriver, you need to pull the screwdriver and extract the secret. After doing this, you will be able to get inside.

Opening a door with a padlock

If, after examining the doors, it turns out that it is equipped with rack lock then you can calm down. Of course, for such locking devices sufficient good protection from brute force. However, if you use intelligent methods against them, you can easily deal with them. To make it easier to open such a lock, it must be lubricated, for which WD-40 liquid is used. Next, you can choose any of the following hack methods.

As a tool, you can use two flat screwdrivers with thin rods. Keep in mind that here it is necessary to use screwdrivers that can work together without special efforts enter the castle well. First you need to place one screwdriver inside in such a way as to fix the notch of the crossbar with it. Then it needs to be shifted a little, after which it is necessary to take another screwdriver and fix its position. After that, you need to perform the above steps again: we find a new notch, move everything and move it with another screwdriver. We do this until the lock is opened.
We use a wooden wedge-key. You may not have a key wedge. However, don't worry about this. You can easily make it yourself. For this any soft wood will be required, from which it is necessary to make a wooden wedge suitable sizes. Next, we take this wedge and insert it into the lock well until it stops, applying physical effort if necessary. After that, it must be removed. After examining the wedge, you will see notches on it, thanks to which you can modify it to look like a real key.
We unlock the lock by pressing the door. Your task of opening the lock will be much easier if the locking mechanism is placed in such a way that you can wring out the door leaf. To do this, you need to take a "crowbar", place it between the jamb and the canvas, and then you need to try to squeeze it all the way. After that, insert a screwdriver into the created slot and remove the lock bolts to the side. The door will be open.

Most of us do not know how to behave in a situation where the key is lost, and it is urgent to get inside. Although experts know how to open door locks without damage, any of us can also solve this problem. There are quite a few quite easy to implement methods, allowing to open the lock, regardless of its design. Therefore, if you want to get inside yourself, try to do everything very carefully. If you do not have confidence in your abilities, it is better to contact a specialist.

Find yourself in front of the locked door of your apartment without your keys in the middle of the night? Or lost the key to the barn's padlock? Before spending money on a locksmith, try picking the lock yourself. The most common type of home and office locks is a pin cylinder lock, which can be opened relatively easily with picks (hook and tensioner), which can be made from improvised means.

Although this process is not difficult and becomes easier with experience, opening the lock requires a lot of patience. To open the lock, you need to insert a thick metal rod or needle into the keyhole and rotate it until you hear a click or turn of the mechanism. In this article, we'll show you how to do it.

Steps

Find out how your castle works. A pin cylinder lock consists of a cylinder that rotates in its body (see illustration below). When the lock is closed, the cylinder is held in place by a number of pins split in two. The top of the pin in each pair extends through the cylinder and through the body, preventing the cylinder from turning. When inserted correct key, the pins are pulled up to the exact position where the top of the pins no longer obstruct the rotation of the cylinder and the lock can be opened.

Pay attention to the five pins, consisting of two parts. The yellow pins go through the cylinder and the silver casing around it. Springs hold the pins in place.
When the correct key is inserted, the grooves and teeth on the key push the pins into the correct position, with the yellow pins fully out of the cylinder, allowing it to be turned and thereby open the lock.

Buy a set of picks (hook and tensioner). Each lockpick serves its own purpose. The tensioner is used to pressurize the cylinder when turning. Professional-grade lockpicks and tensioners can be purchased in a kit (see illustration), but many people who enjoy lockpicking as a hobby make quality lockpicks themselves. Refer to the "What You'll Need" section below for information on how to make your own lockpicks and tensioners.

Place the tensioner on the bottom of the keyhole.

Determine which direction the cylinder must rotate to open. If you often use the lock, you should know in which direction it rotates. If you do not know, then first try pulling the pick clockwise and then counterclockwise. At first, the cylinder will turn just a few millimeters until it stops. Try to feel how steadily the cylinder has stopped. If the cylinder is rotated to right direction, it will rest sharply and rigidly, but if the cylinder is turned in the right direction, then you will feel free place for swing.
- Some locks, especially padlocks, open regardless of the direction in which the cylinder is turned.
Turn the tensioner slightly in the correct direction and hold. Torque voltage may change according to different castles, or when working with different pins, it may take several attempts. Start with a little pressure.

Insert the pick hook into the top of the keyhole and feel the pins. Having inserted the pick into the hole, you should be able to feel and press the individual pins with the tip of the hook. You should be able to push the pins up and feel the pressure of the springs as you push the pick down. Try to lift each pin all the way up. Determine which of the pins is the hardest to lift. If they all give in easily to pressure, then increase the tension of the lower master key (tensioner). If one of the pins does not move at all, loosen the tension until the pin starts to move. Alternatively, you can “comb” the pins before starting the above process (see Tips below).

Press down on the stubborn pin until it snaps into place. Push the stud pin with enough pressure to overcome the spring pressure. Remember that the pin consists of two parts. The pick presses on the lower part of the pin, which in turn presses on the upper part. Your task is to completely push the top half of the pin out of the cylinder. After you stop pressing on the pin, Bottom part should return down to its original position, and the upper part, due to the tension with the second master key, and a slight smell between the holes in the body and cylinder, should fall into place and remain in the body. You should hear a slight click as the top pin hits the cylinder surface as it falls. You can also check the bottom pin - it should move up unhindered due to the lack of spring resistance - in this case you have most likely managed to get the top pin in the correct position.”

While continuing to hold the tensioner, repeat the last two steps with the rest of the pins. It is very important to hold the tensioner, otherwise the “put in place” upper pins will fall into the cylinder and everything will have to be started over. You will need to adjust the tension for each specific pin (increase/decrease the pressure).
Turn the cylinder with the tensioner to the end and open the lock. Once all the top pins are “in place”, you can turn the cylinder and open the lock. This is given that all this time you have been pulling the cylinder in the right direction. If it turns out that you worked in the wrong direction, you will have to return all the pins to their original position and start over.
- If you are very lazy, you can simply order a ready-made set of master keys on the Internet.
- Sometimes locks are installed upside down (especially in Europe). The pins in such locks are at the bottom, not at the top of the cylinder. The process of opening such locks is identical, with one difference: you will need to press on the pins from top to bottom and not from bottom to top. If the key is inserted into the lock with the teeth down, then the pins will be at the bottom of the cylinder. Once you insert the pick into the keyhole, you can easily tell if the pins are up or down.
- If you are dealing with simple lock, such as a cash drawer, then you most likely will not even need a lock pick-hook. Just insert something flat metal to the very end and, moving the “master key” up and down, turn. If you're lucky, the lock will open in a few seconds.
- Smoothly polished picks are easier to insert into the keyhole and maneuver them inside.
- The technique called “combing” or “combing” the lock is a simplified opening technique. To do this, insert a lockpick (preferably a comb-lockpick or paper clip bent in several places) until it stops against the keyhole without tensioning the cylinder. Then, with a quick movement, pull out the pick by applying pressure towards the pins and at the same time lightly turning the cylinder. Theoretically, you can open the lock by “combing” the pins once or twice, but usually this method will put several pins in place, and you will have to manually put the rest.
- Lockpicking enthusiasts generally frown on the use of paperclips, pins, and hairpins in this endeavor. Basically, because with these improvised means it is more difficult to open the lock than with special master keys. Although this is so, with special diligence and patience, you can adapt to effectively open locks with them.
- Picking locks has become a popular hobby among puzzle lovers. If you want to try this hobby, it's best to practice with simple, cheap locks, or even locks with all but one of the pins removed. Look for old castles online or in antique shops.
- in different castles different amount pins. In padlocks, usually 3-4, and in door locks more often from 5 to 8 pins.
- You can't see inside the castle, so use your hearing and touch sense to understand what's going on inside. Be patient and methodical, listening for weak clicks and resistance you feel. With the help of the information obtained in this way, you can visualize, internal organization castle.
- Pins are usually put in place in order from first to last or vice versa; you will need to experiment to find the right direction in the castle. Although most locks open from last to first pin, sometimes you will need to try the reverse order.
Warnings
- If the lock is opened correctly, it will not be damaged, but if the cylinder is pulled too hard or the pins are pressed too hard, there is a risk of damage to the lock mechanism.
- If the pin does not budge when you press it with a pick, then you may be pulling too hard on the cylinder, causing the holes on it and the body to separate. Try loosening the cylinder. In this case, there is a risk that the pins put in place will fall into the cylinder. Unfortunately, there is no other way. Try the next time you try to change the order of the pins you are working with.
- There are many different laws about picking locks, about owning master keys, about using improvised tools. In Russia, master keys (devices that allow you to open a lock without physically destroying it) are regarded as technical means intended for secret obtaining of information, the manufacture, purchase and sale of which is subject to licensing. Illicit trafficking (i.e. manufacture, purchase or sale without a license) of such products is a criminal offense punishable by up to 4 years in prison. Well, besides this, it’s not worth saying that open only your own locks!
What will you need
- Lockpick-tensioner (preload): many items can serve as your tensioner. They should be strong and not break when the cylinder is pulled, and be thin enough to fit slightly into the keyhole. The end of the tensioner should not be too thin and fall into the keyhole to the very end. He must also be small size to leave enough room for the second pick to freely maneuver when both tools are inside. You can use a small hex wrench that tapers at the end or a flat head screwdriver.
- Hook Pick: You can use a pin or paperclip. To make a pick from a paperclip, straighten it and bend one of the ends 90 degrees. You can also bend one end into a small loop. Sharp-nosed pliers will make the process much easier. Choose objects made of strong metal for picks, otherwise they will bend under pressure on the pins. Picks made from a hacksaw blade work best. Invisibles for hair - too good material for a pick. Cut off the rounded ends of the invisible and make a right angle out of it, and then bend one of the edges 90 degrees.