Do-it-yourself paper fortress model. Do-it-yourself tricky locks

It is relatively simple, with just a little effort and a little patience, to make a beautiful castle out of paper, which will surely please not only the boy, but also the girl. It will be possible to take the scheme found on the Internet as a basis, but this does not mean that this is where creativity should end. It would be nice to turn on the imagination and create your own unique palace. Additionally, this product can be used as a decoration, for example, as a stand for various confectionery products.

What do you need to make a paper castle?

You will need a cardboard box, sand, paints, fabric, sawdust, as well as cans of chips, glue; scissors and pen.

Advice

If you are doing this for the first time, it is advisable to use the step-by-step instructions with illustrations.

First, you should disassemble the box, leaving its bottom as the bottom of your future castle. On one of the walls it would be nice to draw a gate, then cut it out, leaving the connection only with the bottom of the box. Next, you need to make teeth on the top of the box, then they need to be completely bent through one in order to further glue a cardboard roof on them. After that, you can combine sand and paint. It is necessary to divide the sand into piles, and then combine them with yellow, red and blue paints. Before proceeding to the next step, you will need to wait until the sand is completely dry. It is necessary to apply glue to the walls of the future castle and sprinkle them with yellow sand. As a lining of the front wall, several pieces are cut out of cardboard, which will visually resemble stones. They will need to be glued along the edge of the castle gate. After that, you need to take a can of chips and cut out a kind of window in it. And a cone is glued on top, which will serve as a roof. Glue is applied to the tower, and then blue sand is poured. Red sand is used to decorate the castle roof. The paper castle should be fixed to the base. For this, cardboard is taken, which is then painted over in blue - it will be like a moat with water around the cardboard structure. The grass supposedly growing between the castle and the moat is made on the basis of sawdust, painted over in a green tint. Now it remains only to come up with some interesting and fascinating story to please the child with the story and give him a new game.

Creating a believable, paper castle

In order for a cardboard castle created at home, with your own hands, based on paper to become the most exact copy of your original, you need to follow a few rules. First, you need to make towers. To do this, you should use tubes, at one end of which teeth are cut. This will become the top of the castle. They must be the same, and also located at approximately the same distance between them. To implement this, you must first draw everything with a ruler with a pencil, only then you can, in fact, start cutting it out. It is also important not to forget to draw windows and doors. First, mark them with a pencil.

Advice

You can decorate the towers as you like, at your own discretion.

Walls

After that, you can go to the walls. Cut out 4 patterns. Each of them has a rectangular shape and an approximate height of 9 centimeters and a width of 7 centimeters. Castles have always been built of stones, therefore, in order for the cardboard structure to become as similar as possible to the prototype, you need to draw stones. To do this, you need to paint over 3 walls in gray paint, and then, after it dries, draw arbitrary stones using a felt-tip pen or marker. And on the last castle wall, it is necessary to equip the gate, they must first be drawn and then cut out. They are painted under a tree, and, for the sake of greater credibility, you can draw hinges on which the door leaves are held. The last wall will need to be connected to the rest.

Tower

Now it's time for the towers. Their circles are conditionally divided into 4 parts, after which in 2, located nearby, it is necessary to make small cuts, in height, like the walls of a castle. Then connect each of them to the walls. The roof can be made on one or all towers. It depends on the creative mind. For the roof, you should take cardboard, from which then cut a circle. After that, it is cut into 2 parts, on which it is necessary to draw a semblance of a tile. Next, the roof is fixed on a cardboard lock.

Output:

Making a palace out of paper or cardboard is not as difficult as it might seem. Moreover, using the step-by-step instructions, you will save yourself from mistakes. Such a craft will arouse the interest of the child for a long time and will become one of his favorite toys.

How to make a paper castle

Cardboard castle

paper castle

For the resourceful and creative, nothing is impossible, right? Why spend your personal savings on an expensive construction set if it can be made from waste material... and in just half an hour! Do not trust? Then watch how easily cardboard rolls, trays and boxes are transformed into luxurious medieval castle, and You will want to make such a miracle yourself.

But the most interesting thing is that each time the fortress can be built in a different way - depending on the mood and circumstances of the game.

Prepare, please:

• rolls of paper towels, foil, etc.,
• cardboard boxes and inserts,
• egg tray,
• cones, nuts,
• toothpicks,
• scissors,
• stationery knife,
• PVA glue (glue gun)
• stapler.

Get started and do not be afraid to fantasize, the main thing is passion and love for nature! Recycling of raw materials - another step towards the preservation of the natural resources of the Earth.

At first let's make a dragon. Here is such a cute dinosaur that will perfectly cope with his role. Cut out the silhouette of a dinosaur from the cardboard piece. Cut the kitchen towel roll in half and make two longitudinal cuts on both halves. These are dinosaur limbs. Glue gray spots on the back of the dragon, and colored ribbed spikes on top. It remains quite a bit - to make dinosaur eyes, draw a mouth and fix the body in cuts of cardboard rolls. Ready!

Let's move on to making a paper castle. The courtyard towers will consist of rolls of various diameters and heights. Cut windows and balconies with a clerical knife or nail scissors. Cutting rolls is best left to mom or dad.

Trees are easy to make by gluing nuts and cones inside small cardboard cylinders with hot glue.

Feel free to glue a cardboard base to the narrowest and highest towers - a circle or a coil from a decorative tape. Otherwise, the rolls will fall and destroy the structure.

The roofs of a fairytale castle are very easy to make! Grease the inside of the egg carton cut out and attach to the tower. The sharp tops of the towers are easy to make from cardboard circles. One has only to cut a small sector with the top in the center of the circle, roll the workpiece into a cone and fasten it with a stapler or PVA glue.

Make the walls and corridors of the palace from cardboard parts from packages of household appliances. In shape, they should resemble a brick.

The pride of every castle is its flag. Multi-colored flags (if, of course, You paint them) will decorate Your fortress on fasteners made of toothpicks.

What is a palace without a princess? Settle her in one of the towers of the fortress. And do not forget about the courtiers, guards and other puppet people.

Add details: cut out the image of the crown - a symbol of royal power, make flower beds and an entrance to the fortress with a drawbridge.

Take the old railway out of the closet - and you already have a whole fairy-tale country with amazing inhabitants and medieval architecture. Fun game!

And after playing enough, do not forget to assemble the designer in a box or a plastic container. Fairy tale castle will come in handy more than once.

To protect the house from the entry of strangers, locks are installed on the doors. They come in different types and types, so choosing the model of interest, taking into account your requirements, will not be difficult.

Classification of door locks

According to the degree of protection and according to the opening mechanism, locks can be divided into the following groups:

• constipation - hook, valve, etc.;
• locks - mechanical, electromechanical, electromagnetic.

A simple option for the unlocking method is constipation. They do not contain a secret locking mechanism and no keys are used to unlock.

Of the locks that have a mechanism, a simple option is mechanical devices. To open or close them, you need a key that is inserted into the well and, depending on the design, is either turned or moved back and forth. As a result, the lock works and the door opens.

An electrical signal is used to control electromechanical and electromagnetic devices. They allow the use of a remote control to open the system remotely. It is possible to use fingerprint or palm reading, voice control, etc.

According to the mounting option, locks are:

• overhead,
• mortise / built-in,
• mounted.

Overheads are less practical, so their use is gradually fading away. The lock consists of two important elements: on the one hand, there is a secret mechanism and a latch, on the other hand, a striker.

Mortise-type door devices are more practical and popular. The main part during fastening is located in the body of the door. From the outside, only a keyhole, a decorative panel and a handle to open the door are visible. The counterpart is located in the same way in the door frame.

Built-in type lock is more practical. It is also located inside the door leaf, but with the only difference that it does not crash into it, but is installed during the manufacturing process of the door. A distinctive feature of such devices is the presence of crossbars, which can be located not only in the lock area, but also around the entire perimeter of the door.

The padlock is used only for locking outbuildings. Because its use on the entrance or interior doors is impractical.

Almost any castle contains the same set of elements:

• castle larvae;
• retractable crossbars;
• pens;
• fake tongue;
• patch panel.

A distinctive feature of locks for interior doors is the absence of a secret mechanism, while door devices for entrance blocks cannot do without them. The more combinations of the lock, the more reliable the locking device.

There are certain types of door structures that fall into the category of burglar-resistant. It is impossible to open such a lock without a native key.

According to the type of locking mechanism, door devices are divided into lever and cylinder.

Locks can be either purchased in specialized stores or on the construction market, or made on the door with your own hands. For such a constipation, it is much more difficult to find a key, it is assembled from high-quality elements, and only the developer knows the scheme of the secret part.

In addition, locks are divided according to the scope, in connection with which they are:

• for entrance doors;
• for interior doors.

Their device is approximately the same, but there are still differences, which allows you to distinguish between devices for their intended purpose.

Lock mechanism

The larva is the main part of the castle. The safety of personal property depends on its reliability and secrecy.

Depending on the design, the larvae are:

• cylinder;
• level;
• disk;
• crossbar;
• cross.

Cylinder devices are characterized by the location of the secret mechanism in a kind of cylinder. It consists of several pins that are responsible for opening and closing the lock. In order to unlock such a device, a key is needed, with special notches, which, when the key is turned, will mix the pins into a certain position.

Level types are considered more reliable. This is due to the presence of special levers that rise to a certain level when the key moves in the keyhole.

The disk device is less reliable, but no less popular. To unlock such a mechanism, you need a key, in the form of a rod cut in half, with characteristic notches. When turning such a key inside the keyhole, a kind of tunnel is formed and the disks turn, as a result of which the mechanism is unlocked.

Crossbar mechanisms are less reliable, so they are used very rarely. The principle of unlocking consists in the movement of two bolts, which are pulled apart by special keys.

The cross-type larva is the most unreliable. You can crack this type of lock with a Phillips screwdriver at your disposal.

Homemade latch lock

The principle of operation is as follows: a bolt (such as a furniture bolt) is installed in the door, which is turned with a hex key. The bolt goes through the entire thickness of the blade. On the reverse side of the sash there is a rail (latch), which is attached to the bolt. For this, a flat flat is made at the end of the hardware. It is performed using a needle file. The rail is mounted on a flat. So that the steel plate does not fall off the bolt, it is supported with a nut, which is screwed on one and the other side of the heck.

To lock the door, the latch must be in the striker.

Now, to open the door, insert a hex key into the head of the bolt and turn. Simultaneously with the turn of the bolt, the latch also turns.

Hidden mechanical device

The trick of such a heck is that it is difficult to find the head of the unlocking bolt on the surface of the canvas.

DIY mechanical lock

Such a valve can be made by hand. It is a metal plate that looks like in the picture.

A small hole is made in the sash (about 10 mm). The key stem has a plate at the end that can rotate around its axis. When the key is pushed into the keyhole, the plate with the rod form a single straight line. A limiter is marked on the rod, and the key is inserted into the well clearly along this limiter. Further, the plate is lowered under its own weight and fixed in one of the slots on the valve.

Diagram of a homemade mechanical device

To prevent the rail from falling out during movement, a limiter or stopper is installed for it, made in the form of a stop and two supporting brackets. Thus, on the one hand, the course of the rail is controlled by the stop - limiter, on the other hand, it moves to the first bracket.

Only a private key made for this lock can open such a system, since it is impossible to find out from the outside the length of the plate attached to the rod.

Electromechanical door device

When the door is locked, the crossbar, consisting of a rod and a head, enters the reciprocal bar, while the spring associated with it is stretched or cocked. The spring is connected to a coil or solenoid. When the electricity is turned off, the spring is released, and the bolt is drawn into the lock.

The design of the electromechanical device

Attention! If there is no electricity, the lock can be opened from the outside with a key, and from the inside the door is opened using a special lever or button.

Electromagnetic door locks

To understand how to make a magnetic lock with your own hands, first consider its device.

Castle and its device

The main element of the mechanism is an electromagnet, which is a core made of transformer steel in the shape of the letter Sh. Such steel does not have a memory effect and is a magnetically soft material. The core is recruited from a large number of thin plates or made from a single plate.

Around the core is a winding of copper wire coated with enamel. The coil has a large number (up to a thousand or more) turns. When an electric current passes through the winding, an electromagnetic field is created in the core, which controls the operation of the lock.

However, over time, there is a weakening of the mechanical characteristics of the door due to the effect of residual magnetization. To combat it, the effect of changing the polarity of the voltage is used when the locking device is demagnetized. However, in this case, force is required to open the door.

Due to the absence of moving parts, the lock has a long service life.

Since low-alloy steel is used for the manufacture of lock parts, which is easily corroded, they must be protected. For protection, varnishing, galvanizing or nickel plating is used.

The main parameter of the lock is the force of holding the door. To increase the force that is applied to hold the door, it is possible to install several locks. This value depends on the material from which the core and armature are made, the current strength and the number of turns in the coil winding. Performed overhead type.

Electromagnetic or electromechanical locks are installed on fire doors, entrance structures in entrances, etc.

Types of electromagnetic locks

Depending on the work of the anchor, the structures are divided into holding and shear. In holding models, the anchor acts on separation, and in shear models, it shifts in the transverse direction.

For locks of the holding type, when voltage is applied, the resulting magnetic field in the armature-core circuit keeps the sash from opening.

The principle of operation of the holding electromagnetic lock

For shear-type devices, the armature has holes, and the core has protrusions for these holes. When voltage is applied, the armature is brought to the core and is attracted to it. In this case, the protrusions of the magnetic circuit enter the corresponding grooves of the armature. In this case, the holding force is characterized by the force that must be applied to move the anchor, and the design features of the protrusions and holes.

Sliding locks are installed using a tie-in in the end of the leaf and, thanks to this, this type allows you to install a secret magnetic deadbolt on the front door.

We assemble an electromagnetic lock with our own hands

Consider one of the options for assembling the mechanism.

To assemble an electromagnetic lock using your experience, which would be opened using the remote control, you must:

• Pushbutton mortise panel.
• Power Supply.
• Electromagnetic relays. If we are going to open with a four-digit code, then we use at least 5 relays.
• The castle itself.
• Button to open the door from the inside.
• Reed switch and electromagnet.

Electromagnetic lock scheme

A keypad, such as model CBD-10V, can be purchased from the market.

Thus, with your own hands you can assemble a lock of any type. And it is important not only to build and beautifully decorate a house or garage, but also to protect it from unwanted visitors with a reliable lock.

In contact with

Comments

Unfortunately, there are no comments or reviews yet, but you can leave your own ...

New Articles

New comments

Artem

Grade

Elena

Grade

nezabudka-1

Grade

Ekaterina

Grade

Vladimir

I propose to look at the original decorative locks that Eleksys made on his garden plot with his own hands.

The first castle-flower bed was made about eight years ago. The rest is recent - last year and the year before last. The lighthouse is real - it glows at night.

And here are some other garden crafts you can make from gypsum with your own hands.

And now the master class!

I had an idea-fix to make a craft for the garden that amuses the eye, with my own hands. The choice fell on a mini-castle, since it is the easiest to enter it anywhere in the site, taking into account its geological features. Moreover, you can build creatively, adding or changing its elements on the go.

The main material is sand and cement for the longevity of the composition. After experimenting, I settled on a composition of 2 to 1 (i.e. 2 parts sand and 1 part cement). Sand is best dried in the sun, then it is easier to mix with cement, and also sifted for use in elements with fine detail, as debris can ruin the part.
The castle has a fairly decent volume, so building it all at once is unrealistic. To do this, first I make separate parts of the castle, so that later I can build it from cubes in a couple of days. The last, third castle was assembled in two days. Neighbors thought he fell from the sky when they saw him.
So, consider the elements of a typical design.

Let's start with the towers. A cylinder of the desired radius is rolled up from a sheet of iron (I have about 2-30 cm). The cylinder is fixed with wire or self-tapping screws so that it can be easily disassembled later. Anything is placed inside the cylinder - bottles, cans - to reduce the consumption of the solution, but the thickness to the ballast must be at least 5 cm. Fill it with a sufficiently thick solution. We give him several hours to set to such a state that when the formwork is removed, it does not crumble. You can choose the height of the cylindrical formwork yourself. It can be equal to the height of the tower, or less, but then the formwork will have to be disassembled and assembled above the already seized lower part.

We immediately begin to cut the raw, slightly seized solution. The cutting technology is the same as that of the sandboxes. For cutting, I use a set of tools available to everyone. I have these screwdrivers, chisels, a medical scalpel, a hacksaw blade for metal and various strips of tin to form various architectural elements.
A simple cylinder is boring, and this is where the flight of fancy begins. I make various grooves by wrapping a cylinder with a long strip of tin, using this strip as a guide, I select annular recesses with a screwdriver or chisel. Then, in the lower part, you can imitate masonry, destruction, plaster chips, cracks - after all, the castle is ancient.

For me, aging is the most exciting part of the process. At the same time, we do not amuse ourselves with making windows, loopholes, picking out the desired recess with a knife. If there is a desire to make a turret in the upper part of the tower, then we turn off a cylinder with a diameter a couple of centimeters larger and a height of 10-15 cm, insert a plastic bottle inside to save the solution (it will be removed after complete setting).

We fill the form with a solution and, after partial setting, carefully remove the cylinder formwork and make the required number of windows, teeth - as fantasy tells. I cut the teeth with a hacksaw blade for metal - I make cuts of the required depth and pick off the excess solution between the cuts.

The roof can be made from tin cones, and you can use this tin cone as a mold for pouring mortar (I do this). After complete setting, carefully knock out our roof from the mold. Do not forget that we are still preparing individual elements of the castle. We'll put it all together later. So we figured out the tower. We have all the elements ready and stacked somewhere in the corner.

Let's start building walls. Our walls will be either fortress (1) or an element of the building (2).

There is no difference in their production. We assemble a rectangle of the right size from boards 5 cm wide. We put it on a flat surface (I have an old kitchen table) after placing either a film or a piece of roofing material so that the solution that is then poured is not absorbed. You can place a metal arch in this frame - this will be a door or gate. Pour the solution into the frame. Where no windows or doors are planned, gravel or broken bricks can be poured to the bottom to save mortar. After the solution is poured to the desired height, you can take pretty pebbles from gravel and poke them at the base of the foundation so that they protrude with flat edges above the general plane of the solution by about 5 mm.
If there is no gravel, then after partial setting with a sharp knife or scalpel, you can imitate the foundation. You can also mark future windows with pebbles. Thus, your task is to make such flat elements. To speed up, I make 2-3 such rectangles at the same time. Having made such a wall once, you will understand that they are made easily and very quickly. As a rule, we are interested in the outer side of the castle, the inner part does not represent anything, because it is not visible.

So, after a few hours, the mortar of our future walls seized very (!) This moment so that it was pliable, but did not collapse, and if it was overexposed, it would be difficult to process. We carefully disassemble the frame and we are left with a flat rectangle on the table. If you make a wall with teeth, then we make the gaps between the teeth by gradually removing the solution with a flat tool (I use a metal ruler for this). Next, loopholes and windows are made. Draw whatever your fantasy tells you. To remove the remnants of the solution, I use a soft brush (probably seen in the movies how archaeologists work). In the end, you will have something like the following on your table.

Leave the finished walls for about a day on the table. Then they can safely be removed from the table and also put in a corner. When the required number of elements has already been made, we select a sunny day for installation in a summer cottage. There is another important point here. The castle looks more beautiful on some kind of elevation, on a pile of stones. So prepare a foundation for it. If you use stones, always place the stones on a small layer of mortar first. If this is not done, then the stones will move over time and destroy your beauty.
When the foundation is prepared, we proceed to the assembly. First, we install it on a cement mortar previously applied to the foundation, for example, tower No. 1. We attach wall No. 1 to the tower for mortar. Then we install the tower number 2.

The castle is already beginning to take shape. You are filled with excitement. Next, add wall No. 2 and finish with the installation of tower No. 3. My towers were heavy, so men need to tinker. Thus, at this stage, we got this design (top view)

But wall #2 will be part of the building, so I take some bricks and form a rectangle of this building. In order to prevent the solution from getting into windows or doors from the inside, I close them with something flat from the inside (I use pieces of flat slate or fragments of flat tiles).
I have the inside of the castle hidden. But if you want it to have a beautiful look, you need to make both wall No. 3 and the inside for the monolith, fill it with concrete mortar or fill it with construction debris.

When this structure grabs, form a gable roof over the building. It takes me two or three bricks to do this (a mortar is thrown with a spatula and leveled under a cone).
So, from the main basic elements, slightly changing them depending on your imagination (for example, you are tired of round towers - make rectangular formwork and the towers will be square, etc.) you can make a complex castle - like this for example.

A castle made of concrete is not very beautiful. Need to decorate it.

About imitation. The boulders at the base of the foundation are made very easily as they are of arbitrary shape. Imitation brick requires more patience. Under the ruler, I scratch a series of horizontal lines and then make vertical notches at characteristic intervals. We brush off the debris with a brush. Where the surface is very rough, it can be smoothed by moistening with water from a spray and ironing with a soft brush. When the assembled castle is completely dry, you can tint it a little. Roof to give the appearance of tiles. I use acrylic paint with the right color, for painting brick imitation I purchased such colors for acrylic - black, red, brown, yellow. Green can be taken to simulate moss. With a soft brush, lightly touching the masonry with different colors of color I paint the surface. In this case, only the convex surface is painted, while the recessed part remains gray. The effect is amazing. From half a meter it seems that everything is made of small bricks. In one place of the castle, I even simulated a destroyed brick wall. I did not expect such an effect. For a year the castle survived the winter and the paint is like new.

Can you make parts at home? I work in a garage. But in principle, you can do it at home if you don’t litter too much. In this case, the details can be broken down into even smaller ones. Those. for example, make a wall in two parts - the upper one where the teeth and the lower one where the gate. Similarly, make a tower from two or three cylinders or cubes. Then it's easier to transport. This allows you to prepare the castle even in the winter-spring time, and in the summer to assemble it in a couple of days. This is how I prepare dry mix. I fill half a bucket with dry sand, add cement and it mixes very easily with a small children's spatula. I pour all this into a small tub and do the next batch until I fill it. Thus, the dry solution is always in sufficient quantity.

I wish you all success in your work. And be sure to share your results.

Perhaps, quite unexpectedly, you have free evening time, and you want to spend it with your child. Maybe you just like to create unusual and original things with your own hands. In any case, we suggest that you learn how to make a cardboard castle quickly and easily with your own hands.

How to build an original cardboard castle with your own hands: preparation for the process

For the manufacture of an original and unique cardboard structure, you need, first of all, to prepare the source materials. To build the walls and towers of your house, you need to find large sheets of thick cardboard. As a building material for the phased formation of walls, old cardboard boxes are suitable for you. Such boxes can be collected after buying household appliances or new furniture.

Cut out windows and at least one door on the surface of your cardboard box. Now you need to find boxes from small TVs, or just small boxes from which you will build turrets, otherwise what kind of castle is this.

From an egg carton, you can make a balcony for a tiny doll. Such a template is easy to mount on a wall made of thick cardboard.

You can use multi-colored stationery to form tiles on the roofs of your castle turrets. You can do the interior design of the building completely at your discretion.

Making layouts and diagrams is a very important component of children's creativity. After all, by assembling a model, the child not only develops his imagination, spatial thinking, fine motor skills of the hands, but also a detailed accurate idea of ​​the subject. We offer readers detailed information and a master class on the process of making a castle model.

For work, you will need to prepare the following materials and tools:

• thick cardboard;
• PVA glue;
• ruler;
• simple pencil;
• compass;
• sharp scissors;
• watercolor paints.

Now proceed to the process of making a layout for your structure. If you and your child decide to make a layout of the royal castle, then first decide on the material for creativity. You can use wooden panels or cardboard sheets as building material.

If you opt for a wooden material, then you will get a strong, durable royal castle - a real reason to be proud. The main disadvantage of a wooden castle is the difficulty in cutting out details from a sheet of wood. However, if you are good with a jigsaw, then this will not be any particular difficulty for you.

Making your own cardboard castle seems very easy and simple. The process of cutting and gluing the separate parts of the composition together looks very easy and simple to perform. However, difficulties may arise when any fragment of the structure is not completely glued. In this case, it is necessary to add a small amount of PVA glue. As a result of such actions, a few drops of glue can get on the front "wall" of the castle, because of this, the paint on it is stained, and so on. It is also quite difficult to maintain the flawless appearance of a product made of such a fragile paper material.

Having decided on the desired material, proceed to the manufacture of drawings of your design. Decide on the design of the castle that you want to bring to life. When using cardboard sheets as a starting material, you can make locks of any complexity. These can be buildings with rounded walls and turrets, carved windows or drawbridges. Cardboard is a very malleable material, so your imagination in this case is not limited.

At the moment when you already have a finished idea, draw a sketch of the future design. Then, directly on your template, mark the approximate height, length and width of your castle. Based on the basic dimensions, proceed to build a more detailed and detailed drawing. Use a compass to build the rounded parts of your structure.

After that, transfer the drawing to the selected material. Paint all the fragments of the building in the selected color. After complete drying, cut out all the details along the contour and glue. Now your original and unique castle is ready.

Video on the topic of the article

We offer a selection of videos on the topic of the article. In the presented material you will find a visual demonstration of the manufacturing process of a cardboard castle. Happy viewing and learning!