How to build scaffolding from planks. We make scaffolding from wood or pipes with our own hands

Scaffolding- one of the most popular structures, without which almost no construction can be completed. If you are building a house, cottage or country cottage, then do not rush to give money for ready product. In our material we will share the best instructions How to make a design yourself.

1. What is scaffolding: a brief educational program

In the most general sense, a scaffold is a framed device made from components and sections, the parameters of which are standardized to international standards. They are designed to protect the activities of workers who are working on the construction or restoration of multi-story buildings.

1.1. Types of scaffolding

Scaffolding is made from metal and wood. Now let's figure out what modifications there are, depending on the type of connection of their components:

Wedges. They are indispensable when using massive materials and assemblies. This means you can be sure that they will not let you down even with the most extensive workload. Another significant advantage is the speed of dismantling.

Pin. They are especially loved by foremen for the speed of assembly/disassembly of the product. Based on the name, it is the pin that is the connection point.

Frame. They are relevant for finishing manipulations with plaster and paint. They differ from the others by a special frame, which is rigidly fixed with nodal fastenings to diagonal and horizontal posts. The cost won't hurt your wallet.

Clamps. They themselves are quite complex in execution: they are applicable to objects of increased importance. Issued in accordance with individual parameters premises. Literally every nuance is taken into account here.

Let's take a closer look at the installation methods for each type. scaffolding.

1.2. Device

The products have details such as:

flooring lintels;
spacers;
enclosing element;
stops;
plank flooring;
racks;
stepladder (ladder).

2. Rules for installing wooden and metal scaffolding with your own hands

The first step begins with a well-designed drawing. Listen to advice professional builders: the width of the flooring should not exceed one meter; product height - six meters; the gap between the racks is in the range from two to two and a half meters. The standard level of lintels for the initial flooring is about half a meter from the ground.

For the next one, it is mounted at a height of 180 to 200 cm. And finally, for the third, it is installed at a height of 360-400 cm.

2.1. Wooden scaffolding: how to make it yourself

Do-it-yourself scaffolding from boards involves the following materials:

boards 4-5 cm thick (for flooring and lintels);
boards (width - from 10 cm, thickness - 5 cm) or timber with a special section (10*10 cm). They will be needed for processing thrust braces and racks;
edged board “30” is useful when forming railings, couplers and spacers;
screws and nails. The former are relevant when disassembling and assembling tall scaffolding, and the latter - at a break and for compact products.

Step No 1. Four posts are cut to the height of the scaffolding. In an area cleared of debris and foreign objects, they are laid out parallel to each other.

Step No 2. Then we securely fix with horizontal jumpers those of the racks on which you plan to place the flooring.

Step No 3. As a result, we have two “ladder” frames. Next, we mount them in a vertical position relative to each other. We strengthen with ties (horizontal and diagonal).

Step No 4. We prepare a strong flooring from bars. Then we securely mount it on the horizontal jumpers.

Step No 5. Now comes the turn of direct manipulation of the forests. They are connected at two side bevels.

Step No. 6. And only after this the railings and stairs are nailed. Ready!

2.2. Products made from profile pipes: detailed instructions

According to its principle, this type of scaffolding is assembled in a similar way. However, consider some nuances. They consist in the use of adapters, with the help of which an increase in product levels is achieved.

However, let's figure out what you need to buy to create one section:

Bolts with nuts and washers (ten pieces). They are very easy to fasten diagonal ties and then fix the base of the scaffold to the posts.
Profile pipe. You need to take about eight pieces of them. Material parameters: 25×25 mm or 35×35 mm. Provide an additional copy for installing railings. You will need one piece (up to two meters).
For the thrust bearings, buy four plates. Their material: metal. Thickness: two to three millimeters. Other parameters: 10×10 cm.
For racks and lintels, take eight segments: equally 1 and 1.5 meters, respectively.
Diagonal ties must be formed from four segments ( optimal length- about two meters) round pipe. It is best if its value does not exceed two centimeters.

Now let's get to work

The first thing to do is to start assembling scaffolding with your own hands from profile pipe, is: the connection of the structure rack to OSB sheet, which is the assembly shield. Clamps are ideal for this manipulation.
Next, we securely attach the jumpers (horizontal) to the racks, and only then fix the adapters (from parts of pipes) into the upper ends of the racks (the optimal indentation is five centimeters). We use a welding machine.
Afterwards, the finished device (tandem jumpers with racks) is first unfastened from the assembly board for the following manipulation: after changing the orientation (rotated by 90 degrees), it is returned to the structure: clamps are also useful for connecting to the board.
Let's not forget about this at the right moment during installation, as correct processing thin-walled pipes (for diagonal braces). For our purposes, we beat off their ends and middle with a hammer. Using a drill, we obtain spans for the bolts.
Very carefully (in the center) screw the bolts into a pair of diagonal ties. Pre-measure the areas where the rack fixation points will be located.
We join the racks with ties with nuts and bolts.
Now let's deal with the railings and posts separately. We make a few holes on them with a drill.
Thrust bearings (plates) are fastened to pieces of pipes. For this we use a welding machine.
At the final stage, the structure is installed in a strictly vertical position. But it is necessary to provide thrust bearings. They are attached to the lower ends of the pipes.
From the usual edged boards We make high-quality and solid flooring, which is placed above the side lintels. Experts recommend using lumber called “magpie” for these purposes.

Pay attention to the secrets that everyone who decides to assemble scaffolding themselves should know:

If you are faced with the task of increasing the length of the scaffolding, then you need to obey the following logic: in the existing sections (in the upper and lower parts) make holes. The bolts that will be located there will be the connecting link with the subsequent racks.
When you attach the ties, make sure to alternate: on scaffolding they are mounted on different sidewalls.
Not always, but when major renovation or large-scale construction, you may be faced with the need to add sections of the third tier (4.5 m). And then you cannot do without a profile pipe for a persistent mowing, which serves for the stability of the scaffolding. What you need to do: Create holes in the posts.
Metal corners (3*3 cm) will prevent the flooring from shifting. They are mounted in the area where the contact contacts the jumpers.

3. Universal dismantling scheme

This procedure has its own characteristics: the technology involves dismantling the structure from top to bottom in a sequence reverse installation. However, do not forget that before the main manipulations you must:

inspect the scaffolding flooring for the absence of any foreign objects: garbage, equipment, etc.;
fence the site to avoid unforeseen situations;
All exits to the balcony and window openings are tightly closed;
make sure that the tools are in working order;
a safety belt is required when the structure has not been used for a long time and there is a possibility that defects or traces of rust may form.

All types of products are dismantled tier by tier, section by section. Special attention Pay attention to the fastenings to the wall, which are disassembled according to a similar principle: remove the fastening hooks, which are located above the tier subjected to manipulation. When disassembling almost all scaffolding (except for the clamp variety), craftsmen advise removing the components of the tier and placing them on the ground.

So let's get started.

First, take into account the strict sequence: fences - posts and fastening devices above the flooring of each tier - diagonal connections within the boundaries of this tier.
Secondly, we move on to the flooring panel. It is not completely removed: one of the fragments will be useful for laying the tier under the one in question.
Thirdly, the railings of the staircases are removed, then the counters. And then - the boards of the platforms and stairs. And finally, it’s the turn of the tier frame: the crossbars (transverse and longitudinal) are removed.
The wall mounts are disassembled. And the holes from them are rubbed with a special compound.

Throughout the entire process, you cannot do without ropes and blocks - reliable lifting devices. The elements obtained after dismantling must be inspected and packaged in order to store or transport scaffolding.

4. Video: making scaffolding yourself

Having mastered the technology of scaffolding installation, it’s time to put the acquired knowledge into practice. And if you are seriously wondering where, then the Stroika ru portal will come to the rescue here too. In our catalog you can always find and order high-quality products from reliable suppliers.

Photos and videos: www.google.ru.

During the construction or finishing of a house, you cannot do without scaffolding. To build them, you don’t have to turn to professionals; you can easily do everything yourself. The structure can be erected either from wood or from a profile pipe. The first structures will be disposable, but the second ones can be used a large number of times. Next, we’ll look at how to properly build both types of scaffolding with your own hands.

What does the structure consist of?

Before proceeding to the construction of scaffolding, it is necessary to clearly determine what elements they consist of. So, the design includes:

various braces that give rigidity to the structure;

floor crossbars;

boards that will serve as the floor of each floor;

supports that will give stability;

fencing;

staircase for ascending to the floors of a structure.

A homemade structure – isn’t it dangerous?

It’s very easy to make scaffolding yourself, but is it worth it? First of all, I would like to note that this is not a small portable design, but quite a voluminous structure, which then needs to be stored somewhere. Even if it is disassembled, the existing boards and pipes will need to be attached somewhere. It’s good if the house can be heated with wood, then it can be useful, but if not, the wood will simply deteriorate over time. With metal scaffolding, everything is somewhat simpler - they can be rented out, but again, if there is a demand for them.

It is also worth noting that the use of hand-made structures is possible no higher than the second floor. The construction of scaffolding, especially of wood, at a higher height can be hazardous to health. In addition, you need to understand that if the structure will no longer be used, is it worth spending a lot of time on its construction? It might be easier to rent. Having assessed all of the above, you can decide whether homemade scaffolding is needed during the construction or renovation of a house. If the answer is yes, it will be necessary to create drawings where not only appearance design, but also indicates the amount of material required.

Installation of a wooden structure

In order to create a structure made of wood, you will need to prepare the following materials:

wooden boards for racks approximately 5x10 centimeters thick;

boards for the floor and crossbars 5 centimeters thick;

wooden boards for fencing and braces with a thickness of at least 3 centimeters;

In this case, the step between the posts should be approximately 2.3 meters, the width of the floor, in order for it to be safe to walk on, should be at least 1 meter, and the height of the structure should be no more than 5 meters. So, in order to create scaffolding from boards with your own hands you need:

use braces to fasten four posts together;

secure the crossbars at the required height;

fasten the boards that serve as the floor to the crossbars;

attach boards that will act as a fence;

install supports;

fix the ladder in the right place;

check the drawings.

All work on creating a structure made of wood is carried out only with the help of nails and a hammer (see video).

Metal structure

A structure made from a profile pipe is more reliable than a structure made from boards. When building a structure, it is necessary to take into account that the dimensions of one section should be approximately 1.5x1x1.6 meters (see photo). You also need to prepare materials such as:

pipe for supports cross section 3x3 centimeters and 1.5 meters long;

pipe for braces with a diameter of 1.5 centimeters;

pipe for connections with a cross section of 2.5x2.5 centimeters;

the floor is made of boards about 5 centimeters thick and approximately 2 meters long;

So, in order to create a structure from a profile pipe you need:

cut pipes for braces for horizontal elements of 1 meter and for vertical elements of 2 meters;

cut two-meter braces at each end, which will greatly simplify their fastening;

connect two supports to each other with horizontal braces, the distance between which should be approximately 30 centimeters;

secure the connecting elements;

drill holes for bolts on the braces and supports;

assemble the structure from a profile pipe to the end;

clean the structure and paint it;

check the available drawings.

How to do without forests?

It is worth thinking about scaffolding even at the stage of creating house drawings, but if this does not happen, what is the right thing to do? If the construction or finishing work of the building is carried out by professionals, then there is no need to think about them, because every team should have such structures. If they have a chance self-construction lost or no more work is planned where they might be needed, the structure can easily be rented.

But in order for scaffolding to really no longer be needed, everything Finishing work immediately need to be carried out with the highest quality possible. For example, it is better to use as finishing materials facing brick or other similar ones, because, for example, plaster and siding will require additional attention.

Even a one-story residential building or outbuilding is problematic to build without platforms or scaffolding. Some kind of elevation is still needed and it would be absolutely correct if it were good scaffolding. They will ensure safety on the construction site and high speed of work, not to mention the convenience of foremen and helpers. It’s not always profitable to rent, much less buy, spatial structures for construction, so let’s try to save money.

What are they and why are they needed?

Building scaffolding with your own hands will not pose any difficulties, but they can solve a lot of issues related to the construction of walls, roofing, and façade finishing. The price of metal scaffolding is about 200 rubles per square meter. On the one hand, not so much, but on the other hand, why buy if home-made ones are three times cheaper in cost, and no worse in quality and functionality, if you adhere to certain rules and regulations.

The main task of scaffolding is to provide the ability to work at a certain height. In this case, safety and convenience are considered first. Regardless of the design and height, or the material, scaffolding must be equipped with either handrails or mesh, be easy to install and compact during storage and transportation. There is no need to reinvent the bicycle, everything has already been invented before us and is described in GOSTs and standards.

Parameters and characteristics of wooden and metal structures

Before choosing a material for scaffolding, you need to decide on its size, taking into account the requirements building codes. They are worth observing, if only for the reason that, first of all, they are designed to take care of our safety. First of all, before the actual construction of the structure, a drawing is made taking into account the following parameters:

the maximum height of the spatial structure should not exceed six meters;
any scaffolding rests on posts, the distance between which must be at least two meters;
the workspace, regardless of height, must be at least a meter wide; this is necessary both for ease of work and to prevent tools and materials from falling.

The following options are considered to help avoid extra costs material. For example, from an ergonomic point of view, it is most convenient to work when the working area is 40 cm below the thoracic region. Therefore, it is at this distance that the lowest platform should be installed. The second level platform is located at a height of 175 to 200 cm from the level of the first platform. It is also worth considering a system of braces or fixing to the wall, which will prevent the structure from moving away from the surface being treated. Now, armed with general parameters and drawing up a drawing, we begin to assemble the scaffolding from wood or metal.

Collecting metal scaffolding

Frame metal structure With wooden flooring- this is what you need for private construction. Such scaffolding is cheaper than clamp scaffolding, more expensive than wooden scaffolding, but is stronger and can be used many times. Framed metal scaffolding consists of sections 2x2x1 m. Dimensions can be changed according to permissible limits, which we have already talked about. To assemble the scaffolding you will need the following materials:

pipe 30 mm;
pipe 15 mm;
sorokovka edged board;
attached assembly ladder;
threaded fasteners;
grinder, drill, welding, building level and the simplest metalworking tool.

Installation of metal scaffolding is carried out in several stages:

Making spacers from 15 mm pipe. A spacer made of a thinner pipe will help maintain the rigidity of the structure without making it too heavy. Transverse (horizontal) struts must be at least a meter long, and diagonal ones - 2 m. The cut pipes are flattened at both ends, after which a hole is drilled in the deformed ends corresponding to the diameter of the hardware.
Manufacturing of adapters. In order to be able to increase the height of the vertical supports, it is necessary to make adapters that will be inserted into the racks and the continuation of the vertical rack will be placed on them. The number of adapters is calculated depending on the height of the scaffolding. For their manufacture, a 25x25 mm profile is used, the length is about 300 mm; for fixing, a coupling 6-8 cm long from a 30x30 profile is put on the adapter.

Assembling the frame and flooring

Each vertical stand connected by horizontal jumpers, which are welded every 30-35 cm.
Support plates in the form of a square with a side of 70-80 mm are welded to the lower ends of the support posts so that the structure does not fall into the ground.
Every two racks are installed vertically strictly according to a plumb line or level. Diagonal struts are fitted to them. A marker marks the drilling locations. Drill holes in the spacers and in the racks for the bolt.
From boards 40 mm thick, boards are assembled along the length of the section, knocked down back side and strengthened so that there is no deflection.
Along the edges of the flooring, a U-shaped profile is fixed with self-tapping screws to the size of the cross member on a vertical stand.
The laid flooring will be fixed with a U-shaped profile, which will prevent the shield from moving.

Now all that remains is to treat the new scaffolding with an anti-corrosion compound, primer and, if desired, paint it. The structure is completely ready for use. Happy construction everyone!

It is difficult to carry out construction work without loess, especially if it needs to be done at high altitudes. The design will help you safely climb to the top, do everything you need, and place materials nearby that will help you in your work. Lease construction scaffolding from a profile pipe is inconvenient, as it will constantly draw funds, which some may not like. Alternatively, you can make loess yourself. They will be made in a way that is convenient for the owner and will provide the ability to rise to the desired height.

Types of loess

There are several types of loess that you can make yourself. Suitable for manufacturing metal pipes, can be added to the board design. If you make everything out of wood, it will be much cheaper than metal ones. But such installations will not be able to withstand significant loads; there is a possibility of breakage with a large weight installed on them.

In terms of time, a metal frame will take longer to complete, but gradually the costs of its production will be covered by reliable service. If necessary, the structure can be disassembled and rebuilt. In addition to wooden ones, there are other types of loess:

1. Clamps. As a priority, they are used to work with buildings that have a complex configuration. Assembling such products is problematic, but there is an option to bend them as required.

2. Wedge. A significant amount of mass can be placed on them.

3. Pin. They are quite simple to assemble and disassemble. They will go for small ones construction work, which do not require serious preparation.

4. Frame. Their advantage is lightness and ease of assembly. They can be collected very high, up to 50 meters. They can withstand about 200 kg per meter of base surface. They are most often used in construction because they are easy to make with your own hands.

Important:DIY construction scaffolding from a profile pipe, should not be subjected to significant loads. It is not recommended for two people to stand on them.

Making loess

Making loess from pipes is not at all difficult. To do this, you need to select the required elements and connect them in the correct sequence. To make the work go faster, it is recommended to purchase and prepare the required parts in advance. After that, you will only need to do certain actions with them and connect them into one structure.

Materials for making loess

To make loess, the drawings of which are given in the material, you need steel racks and frames. The footrest is made from boards. It can be made of aluminum, but it will withstand less load. The recommended height of one section is 150 cm; it is most convenient to make it about a meter wide. The length will be 1.5-2 meters. In terms of height, it is necessary to make scaffolding depending on the height of the house.

Before you start assembling the structure, you need to purchase materials for manufacturing. You will need:

Profiles are 1.5 m long and 3x3 cm in cross section. They are suitable for making vertical edges.
Pipes with a diameter of 15 mm, which will serve for the construction of spacers.
Profile for connecting elements. The section is 2.5x2.5 cm. The flooring will be supported on these elements.
Ladder. You can insert a ready-made one, but if not, you can also execute it from the profile.
Bolts, nuts and washers that will secure each element. Self-tapping screws to connect wooden parts with.

To work, you will need to use a drill, grinder or hacksaw for metal, welding. Connections can be made by making necessary elements carving The earth at the installation site must be well compacted to avoid distortions during the manufacturing process. If work takes place in the rain, you should think about making a drainage system. The ground under the loess will be strong, and there will be no danger for people at heights.

It is important to remember that even minimal wobble at the joints of parts leads to a strong tilt of higher elements and construction may slow down due to the inability to rise to a height. Therefore, all elements must be connected reliably and efficiently.

Collection of loess

Construction scaffolding is assembled in the following order:

1. First, you need to cut the blanks: diagonal parts holding the structure together, 2 meters each. They need to be cut along the edges and flattened to about 6-7 cm. Horizontal elements - 1 meter each.

2. 2 racks located vertically are connected using spacers. They must be strictly horizontal.

3. The horizontal parts are connected using ties, at a distance of approximately 30 cm. Then the boards will be laid there.

4. The connecting parts are secured.

5. Holes for bolts must be made on the supports.

6. The structure is assembled completely, with boards. Wooden elements connected with self-tapping screws. The diagrams will help you understand what and how to do.

It makes sense to paint the scaffolding so that it lasts longer. If you plan to frequently disassemble and reassemble the structure, you can connect the elements using adapters. It is necessary to cut pipes 3x3 cm by 10 cm. A piece of 2.5x2.5 cm profile is inserted into them and the elements are welded.

Many people wonder whether it is worth making scaffolding themselves. On the one hand, this design is bulky; you will have to look for a place to store all the parts. If you make everything out of wood, you can simply disassemble the parts, but this will take a long time. Wooden loess is connected only with nails, not with self-tapping screws. The boards will be intact after work; they can be used for other needs.

On the other hand, if construction work will be carried out frequently, and the height will be at the level of the second floor and beyond, you cannot do without your own loess.

If you decide to make scaffolding, you will have to choose from two materials: wood or metal. In the first case, you will get a disposable structure that can be made by anyone who knows how to work with wood, and in the second, it will be reusable, but also quite easy to make. In this article we will tell you how to make scaffolding with your own hands from metal (profile pipes) and also from wood (boards), demonstrate diagrams, photos and video instructions.

Although metal or wood is predominantly used for the manufacture of scaffolding, they may differ in the method of fastening, and accordingly have different functional elements in their design. So, let's look at the main types of forests.

The component elements are connected by a special wedge fixation. Scaffoldings of this design are different high reliability. They are able to withstand quite heavy loads. At the same time, they are easy to use and can be quickly assembled and disassembled. The use of wedge scaffolding is especially important during construction and lifting of heavy materials and components.

The main element of this design is a rigidly mounted frame. They are mainly used for painting or plastering works. The frame in this design is connected to horizontal posts and diagonal braces thanks to node connections. The main advantage of frame scaffolding is its low cost. Their construction does not require large investments.

In these scaffoldings, the connection point, as is obvious from their name, is the pin. This type of scaffolding is very popular among builders, as they are very easy to assemble and disassemble directly on site. construction site. It often takes a day or even two to assemble the scaffolding. In this case, assembling the pin scaffolding will not take much time.

If the object where repair work is carried out has a complex configuration, then clamp scaffolding is great solution. The fastening method used is professional. And for their manufacture important role height and size play a role working area, distance between tiers and pitch of racks. All this is selected individually for each facility.

We invite you to familiarize yourself with a simple guide to making scaffolding from boards. To do this, follow a few simple sequential steps:

Lay out 4 racks or boards parallel to each other on a flat area. Their size must immediately correspond to the height of the scaffolding.
The racks are connected to each other by horizontal jumpers, on which the flooring will later be laid.
Place the 2 frames made horizontally opposite each other, tie them diagonally and horizontally with boards that will serve as ties.
Lay the flooring from the boards on the horizontal ties and attach it to the lintels with self-tapping screws.
Attach the railings to the posts and secure the stairs.

If it is necessary to lengthen the scaffolding structure, connect several similar sections of boards together. The boards are placed on the support posts.

When assembling wooden scaffolding, if nails are used, it is recommended to pre-drill holes to prevent the boards from splitting.

Design

All forests consist of the following elements:

racks;
diagonal and horizontal struts (they give spatial strength to the structure);
flooring lintels;
a flooring made of boards on which a person will stand;
stops (to create stability of the scaffolding and prevent it from falling away from the wall);
a fencing element (so that a person standing on the flooring does not fall down);
ladder (stepladder) for climbing to the desired level of scaffolding.

Made of wood and boards

You can find quite a lot of advice on how to make scaffolding on the Internet. Moreover, the recommended designs differ mainly from each other only in the thickness of the board and the size of the scaffolding itself. To avoid getting confused in all this “diversity,” try to focus on the following values:

Let's get started:

Prepare the necessary materials in advance:

boards with a thickness of at least 50 mm and a width of 100 mm (or round timber, or timber 10x10 cm) - for racks and stops;
boards for spacers and fencing 30 mm thick;
boards for lintels and flooring 50 mm thick;
nails (screws in this case are less reliable).

Attach the four posts using diagonal spacers (on all four sides) at the recommended distances.

On required height secure the lintel boards.

Secure the deck boards to the lintels.

Nail a board to fence off the work area.

Install stops.

Position and secure the ladder.

Photo instructions

We invite you to view a number of photographs on the topic of how to make wooden scaffolding yourself:

From a profile pipe

Now about how to make scaffolding (collapsible) from metal (dimensions of one section: height - 1.5 meters, width 1 meter, length 1.65 meters). Determine the number of sections based on the height of the scaffolding you need.

Prepare the necessary materials:

for racks - profile pipe (square section) 30x30 mm - length 1500 mm;
for spacers - a pipe with a diameter of 15 mm;
for connecting inserts (adapters) – profile pipe 25x25 mm;
Make the flooring from boards 40-50 mm thick and 210-220 cm long.

Cut the pipe for spacers according to the following calculation:

for diagonal elements – 2 meters;
for horizontal elements connecting the racks from the sides of the structure - 96 cm each.

Cut diagonal two-meter spacers at both ends (by 6-8 cm) and flatten them (this will make it easier to attach them).

Connect two posts together by welding them together with horizontal spacers in increments (vertical) of 30 cm.

Assemble the adapters: put a small section of 30x30 cm profile pipe (7-8 cm long) onto a profile pipe with a cross-section of 25X25 mm and a length of 25-30 cm and weld in the center.

Drill holes for bolts on the posts and diagonal braces.

Assemble the entire structure, sand and paint.

Place one section on top of another (connecting them using adapters), lay the flooring from the boards in the right place.

"Pros and cons"

Firstly, scaffolding is not a small scaffolding, but a rather bulky structure that will need to be stored somewhere after the need for it disappears.

Wooden scaffolding, of course, can be disassembled later, but the work is labor-intensive, and the boards, if you don’t need them in the near future, also need to be stored somewhere. Do not forget that wooden scaffolding They are assembled using nails rather than self-tapping screws, so the boards will no longer be completely intact. In addition, when working on scaffolding, the wood often gets dirty with mortar or paint.

Self-made metal scaffolding can not only be disassembled, but also rented out in the future.

Secondly, non-prefabricated scaffolding is designed to work maximum at the second floor level (from the ground). At higher altitudes, the operation of self-made scaffolding becomes dangerous.

Thirdly, scaffolding is required quite rarely (only for repairing the facade of a building), so the assembly and disassembly of such a temporary structure is not profitable in terms of the time spent on this work.

Fourthly, scaffolding often has to be made long (for example, at least 6 meters for installing siding). Accordingly, their weight increases, and moving homemade wooden scaffolding to the other side of the house becomes a problem even for three or four people.

It is worth thinking about forests at the stage of designing a house.

If facade works you do not plan to do it yourself (but are going to hire construction team), then you don’t have to think too much about scaffolding, since builders usually come to the site with their own scaffolding and scaffolding.

However, upon completion of construction (and after some time has passed), scaffolding may be needed for small façade works. repair work. Can this be avoided?

Certainly. And first, make sure that the facade of your house does not require repairs for many years. To do this, it is enough to use facing bricks when constructing walls. Now it is produced by many manufacturers and in a fairly wide range of colors.

But others facing materials(such as siding, plaster and others) will periodically require your attention and, accordingly, additional expenses, since you won’t be able to make scaffolding (buy or rent) for free.