What tool is needed to install interior doors? What tools are needed to install doors? DIY accessories for installing interior doors.

It is quite simple to choose and buy the door you like, but to install it correctly is more difficult. For the competent implementation of this process, you need to have everything necessary tools and fixtures, as well as have some building skills. Sometimes you may need special equipment - you also need to have it on hand just in case. So, what should be in stock for quality installation door leaves?

Installation interior doors- it is troublesome and it is not enough to have one door and a pair of screwdrivers to carry it out. It is also desirable to have a whole set the right tools to do this job well.

So, what are the basic tools needed to install door leaves:

• Drill- needed to drill required holes different sizes, fasten the hinges, tighten the screws;
• Puncher- this useful tool you can increase or level the door span, drill holes for dowels and perform other necessary actions;
• Jigsaw- with its help, the process of removing platbands and accessories becomes simple and easy (mainly used where it is difficult to use a saw);
• Manual milling cutter(plus cutters) - "helps" to prepare places for door hinges and the locking mechanism, removes the extra layer of wood from the door or door frames;
• Miter and circular (circular) saw- these types of saws allow you to make as smooth longitudinal cuts material, and at a certain angle;
• Bulgarian- it is used to fit the platbands if the walls are very curved;
• Screwdriver with attachments- allows fixing screws and other fasteners.

But apart from electrical appliances and equipment, when installing doors, you cannot do without hand tools, such as:

• Regular hammer- needed to hammer nails or other details;
• Construction knife- it is convenient for them to cut off all unnecessary;
• Chisel- perfect for inserting door hinges and other fittings;
• Screwdriwer set- it will be needed for fastening various parts;
• Building level- ideal "helper" for checking the flatness of the surface;
• Roulette – measuring tool(it is advisable to use a three or five meter tape).

If there is no screwdriver, it is advisable to have a Phillips and straight screwdrivers in the "tool" box, which will help fix all the necessary elements.

Accessories for installing interior doors

When working with interior doors, you may need not only the main tool, but also some auxiliary devices, as well as consumables.

Additional accessories required for door installation:

• Bubble level - used to measure the angle of inclination of vertical or horizontal surfaces;
• Steel ruler - very convenient for carrying out any small measuring work;
• Checking metal square - may be needed when setting up an electric tool, as well as for measuring angles;
• A gun filled with sealant or polyurethane foam is very convenient when applying sealants;
• Spacers as long as the width of the doorway;
• Pneumatic wedges are special wedges that are air cushions that can be used as supporting ballast while working with the door;
• Simple pencils or markers - do not pick up these devices with a very stiff shaft, otherwise the marks made will be difficult to erase.

In addition to additional tools, it should be borne in mind that you will need various consumables, without which you cannot do the job.

What else do you need to have on hand:

• Chisels and files for a perforator;
• Drill bits;
• Router cutters;
• Grinder circles;
• Masking tape;
• Polyurethane foam or sealant;
• Self-tapping screws for installing a lock, platbands and door hinges.

By the way, there are craftsmen who fix the platbands with finishing or liquid nails without using self-tapping screws. You can also try in action special micropins, which are attached with a pneumatic gun.

When working with door slopes and plastering, you may need trowels, brushes or rollers, mortar containers, trowels.

Essential tool for tapping locks when installing doors

Engaging in inserting locks into the door structure, you also cannot do without special tools... Some of them have already been mentioned above, but some devices will be discussed for the first time.

So, to embed the lock you will need:

• Vernier caliper - this tool is needed to adjust the depth of the insert of the locking mechanism, as well as to apply markings under the fittings;
• Roulette - with its help, the places where the holes for the lock will be drilled are determined;
• A screwdriver or drill - great for securing the elements of the lock: handles, latches or lining;
• Fraser - will help prepare holes for the future lock mechanism;
• Hole saw - needed to make holes for the handle;
• Pen drill - you cannot do without this device when cutting holes for the lining and latch;
• Corner cutter for wood drill;
• Ruler, pencil, tape measure, screwdriver set;
• Chisel and hammer;
• Self-tapping screws.

By the way, there are special kits on sale that contain all the necessary equipment for installing locks.

Competent and professional door installation

It often happens that people doubt their abilities and do not risk taking up the installation of doors on their own. In this case, professional work helps out. Specially trained people quickly and efficiently install the door, cut the lock, adjust the door leaf.

However, if a person has some carpentry skills, you can try to put the doors on your own, but for this you need to purchase a quality tool. Now you can purchase professional kits for such work.

These kits usually contain all the necessary fasteners and consumables that you might need. They also contain very detailed instructions, according to which the work can be done by a person who does not even have special knowledge.

The advantages of this set:

• Everything you need is at hand;
• The kit is suitable for any type of door installation work;
• No need to drill through the door frame;
• Many elements are flush-mounted;
• The decorative finish of the door will not be affected in the least.

Assembling the door yourself or using the services of a professional - the choice is yours.

Professional tool for installing doors (video)

When choosing a tool, you first need to figure out what work needs to be done. If you want to do everything on the highest level then it is better to buy professional kits. If the work is one-time and you don't want to spend a lot of money, you can think a little and replace some of the devices with simpler ones. All in your hands!

Buying your favorite interior doors is only half the battle: these structures still need to be installed correctly. The very installation of interior doors with your own hands is a very painstaking process that requires patience, time, as well as the availability of equipment for installing the structure and the ability to use it.

All kinds of devices for the installation of interior doors should be prepared in advance, because if you purchase equipment as needed, a lot of precious time can be spent on this. In addition, purchasing a tool in a hurry is fraught with a serious danger: it is highly likely that a low-quality mounting kit will be purchased.

In order to clearly understand what tools are needed, you should think over the entire cycle of work, from marking and ending with adjusting the hinges and finishing door slopes... A standard kit for door installation, numbering a dozen items, will not be able to help in performing all these manipulations. Therefore, it is prudent to prepare tools for installing doors according to a previously thought out list, which should be drawn up taking into account the entire cycle of work.

All the tools necessary for installing interior doors can be conditionally divided into two groups:

• electrical goods;
• hand tools.

1. Perforator.
   During construction, this tool is simply irreplaceable. During the installation of interior doors, it is used to level the opening, drill holes for the anchor dowel, etc.
2. Drill.
   This power tool is used for drilling mounting holes, screwing in screws, fastening hinges. Before starting work, make sure that the drill installed in the drill chuck is firmly fixed. If the drill is not properly secured, it can fly off during operation of the tool and damage the door leaf or harm the craftsman.
3. Electric jigsaw.
   A tool whose main purpose during installation door structure- execution of a wave cut of platbands.
4. Bulgarian.
   With a strong curvature of the wall, the platbands are adjusted with its help.
5. Fraser.
   Use this tool to cut hinges and door locks.
6. Electric planer.
   Such a tool is used to fit trims and fittings.

Hand tool

1. Marker or pencil (it must not be too hard, otherwise it will leave on varnished surface door leaf or casing indelible traces).
2. Roulette (preferably using measuring device 3 or 5 meters).
3. Vernier caliper with a depth gauge. This door fitting tool is used to measure the depth of the recess door lock, performing markings for fittings, etc.
4. Chisels. They are used for inserting hinges and other accessories.
5. Bubble level ( optimal length- 50 cm).
6. Steel measuring ruler.
7. Checking metal square. This device is used for checking angles as well as adjusting an electric tool.
8. Mallet and hammer.
9. A set of screwdrivers is needed to install hinges, awnings, locks, etc.
10. Miter box as well as saw.
11. Foam gun.

Consumable material

A set of consumables is represented by the following names:

• lances and chisels for a hammer drill.
• lobe end circles.
• jigsaw files.
• cutting wheels installed on the grinder.
• drills.
• masking tape.

In addition, self-tapping screws are needed to install the hinges, door lock and platbands.

Equipment

Often, interior doors offered to the attention of the buyer are sold without hinges and a lock: this hardware will need to be purchased separately.

Additional accessories

Additional work associated with the installation of interior doors includes the adjustment of the hinges and finishing the slopes.

In the course of adjusting the hinges, the tightness of the door leaf to the frame is checked and, if necessary, using screwdrivers, the fasteners are either tightened or loosened. To complete this stage of work, you only need a set of screwdrivers.

For plastering slopes, you will need a kit, which includes the following devices:

1. spatulas;
2. container for solution;
3. Master OK;
4. a set of brushes and rollers;
5. grout kit.

Of course, it is best to use professional equipment to install interior doors: it is tested and reliable, and therefore serves as a guarantee quality execution works. But, unfortunately, the cost of such a tool is too high.

Therefore, DIYers often have to make this difficult choice between expensive professional equipment and an amateur kit that does not require large costs.

In order for the process of installing interior doors to be successful, it is important to choose the right tool to complete it. There are many tools available today to make the job easier. The presence of some of them is optional, but in any case you cannot do without a certain set.

The right set of tools will greatly simplify the door installation process.

Features of installation work

In order to understand what tools you need to install interior doors, you should understand the very process of these works.

It may seem like a very dusty job for the first experience. In fact, for competent organization labor and the use of accessories, the amount of dirt can be reduced to a minimum.

The whole process can be broken down into several stages:

1. Deleting old construction... If necessary, the canvas is removed and the old frame is cut out.
2. Installation of the box. After preliminary assembly and adjustment, the new box is fixed in the opening. Then all the gaps are foamed.
3. Opening decoration. Excess foam is cut off, the gaps are plastered and covered with platbands. Slopes are drawn up separately.
4. Installation of doors and fittings. The hinges and the lock are inserted, the canvas is hung on the frame. Handles and additional fittings are also attached.

The main stages of installing an interior door

Necessary materials

In order for the installation work to be successful and not take much time, you need to prepare everything in advance necessary materials and stock up on tools for installing doors. Speaking specifically about consumables, the following can be distinguished:

• Polyurethane foam. With its help, the gap between the wall and the box is filled, as well as sound and thermal insulation, shock absorption when changing environmental conditions and reliable adhesion between materials are provided.
• Headless nails. Basically it is a way of joining frame parts and with minimal visual defects.
• Putty. It is used to mask defects on the wall, as well as to create a protective layer for foamed joints.
• Serpyanka. Required for particularly difficult areas to be plastered, especially if it comes about depressions and wide joints.
• Metallic profile. It is necessary to bring out even corners when finishing slopes.
• Drywall. Another material that allows you to tidy up the slopes in the opening.
• Wooden wedges. These are auxiliary materials for fixing the position of the box, installed between the wall and the frame before foaming the gaps.
• Spacers. Hold the frame in position as it expands and dries polyurethane foam.
• Dowel. Hammered into the wall to fix the position of the mountings.
• Bolts. The main fastening element for.
• Glue. Allows you to fix platbands and slopes without using nails.

List of materials required for door installation

Required tools

In order to work with the above materials, you need to have at your disposal certain tools for installing doors. A list of mandatory tools can be distinguished, without which it will be impossible to carry out such installation work:

• Roulette. This is the main measuring tool, without which it is impossible to carry out any construction process.
• Level. Allows you to check the correct position of this or that element both vertically and horizontally.
• Saw. It is used for cutting the elements of the box, add-ons, platbands, etc. For metal, it is better to use a grinder.
• Drill. Allows you to make holes in the wall for further fastening of the opening design elements, as well as in the door itself when installing fittings.
• Chisel. It is used to remove a layer of material when inserting hinges, a handle or a lock.
• Hammer. It is used for fixing platbands and adjusting patch elements.
• Putty knife... With its help, plaster is applied and leveled when finishing the opening.

Basic tools needed to install an interior door

Which one else additional tool may be needed to install an interior door? The following adaptations can be distinguished:

• screwdriver;
• jigsaw;
• trowel for plaster;
• construction mixer;
• nippers.

In case you do not have the entire arsenal of tools that are needed to install doors, some tools can be interchangeable, for example, a screwdriver and a screwdriver or drill.

If you want to achieve the perfect result without undue effort, prepare a maximum list of the described devices. Nevertheless, if you have knowledge and dexterity, you can get by with a minimum number of tools and this will not negatively affect the final work.

Sections of the article:

When planning renovation work in your home, great attention should be paid to the installation of interior doors. Choosing good quality doors is not enough. It is necessary to install them correctly so that the purchase will please for many years. Many who are faced with the installation problem note that the process is quite painstaking, requires perseverance and a certain skill. It is better to prepare a set of tools for installing interior doors in advance. You should think about what specific tools can be useful, what is already available, and what needs to be purchased.

The standardized set of tools includes more than ten different items, but such a list is not always exhaustive. The easiest way is to prepare a list of tools that you may need. In the list, it is necessary to divide the instruments into groups. As an example, one group might include a power tool and another a hand tool. The use of a large number of specialized tools will allow you to do the job efficiently and as quickly as possible.

What is the principle to follow when choosing a tool?

First of all, it is required to assess the scope of work and determine the list of tools, as already mentioned above. Thanks to such foresight, it will be possible to save a lot of time: you do not have to go to the store in the process of performing work, because this can make them endless.

Besides, preliminary preparation will allow you to purchase an instrument best quality, thoughtfully approach the choice, avoid a senseless waste of nerves and funds. If you choose a tool in a hurry, you can buy low-quality devices that will fail very soon.

Those tools that are in the house should be checked - they work or not. Equipment that has been idle for years can fail, rust, and stop working. In order to more accurately compile a list of everything you need, you need to mentally imagine the amount of work that lies ahead. Let's give an example.

It is necessary to replace the doors installed earlier, respectively, the dismantling of the box is required, since new box it is necessary to install it in the prepared opening, and in the walls it will be necessary to close up the slopes. For such work, you will need many different devices. If it is not required to remove the box for installation, the whole procedure will be much simpler and will require a small number of fixtures.

In addition to the tool, you should think about the materials that you may need in the process of performing the work. These can be materials such as self-tapping screws, nails, drills for drills, electric saws, etc.

All this will definitely be needed, therefore the planning stage is very important, it will make the installation of doors as simple and enjoyable as possible.

Power tool you may need

For comfortable work you will need a power tool that is designed to simplify the door installation procedure. In addition, the use of various electrical specialized devices will significantly speed up the work and make it better.

So, consider the required power tool:

Miter saw. This device allows you to cut various materials required angle. You can cut various elements boxes (for example, when joining bars), platbands. In addition, such a saw can be an excellent replacement for a jigsaw, because it allows you to cut longitudinally.

Fraser. Allows you to make cutouts for the lock both in the front and back of the canvas, and from the end. In addition, it is suitable for cutting wood for the installation of hinges.

Electric jigsaw. In order to cut various materials longitudinally without unnecessary hassle, a jigsaw is useful. Can be used instead of a miter saw.

Electric drill. To pre-drill holes for self-tapping screws.

Screwdriver. It is necessary in order to carry out the installation of various screws. In addition, a good screwdriver is quite capable of drilling holes using special drill bits.

Perforator. Allows you to drill holes in walls made of hard materials that a screwdriver will not take. It can be concrete or brick. It can be used to knock down excess mortar / concrete from the doorway.

This is a list of those door installation tools that are likely to be needed in any situation. The purchase of most of them is fully justified, since they will definitely come in handy on the farm. For example, using a screwdriver, you can always easily tighten any bolt, and a punch is needed in order to hang a picture or a shelf on a load-bearing wall.

Required hand tools

Which hand tool needed for high-quality and correct installation interior doors?

Consider the basic tools that will definitely come in handy:

Chisel. Its use will allow you to prepare places for installing door hinges and a lock, as well as its counterpart. Can replace a router in the absence of the necessary budget for its purchase.

Hammer. Anyone knows the purpose of this important household tool. It can be used to hammer in any fasteners. When installing doors, you will need it if you need to nail the platband.

Plumb line, or level. With their help, you can install the door frame in such a way that in the future the canvas does not sag. Without them, the installation will not be completed, since the box will not be installed evenly.

Saw. For trimming any wooden elements constructions. Since the tree is not too thick, to cut it with normal hand saw will be sufficient.

Scrap (mount). Without it important tool it is impossible to remove the old door frame. With the help of a scrap, this procedure can be carried out quickly and easily.

A device for extruding polyurethane foam (gun). When foaming the box this device will definitely come in handy. Otherwise, the procedure cannot be carried out.

Screwdriver. Suitable as a replacement for a screwdriver in the absence of funds for it. Better to stock up on a set of screwdrivers, or big amount special attachments for always easy selection required size under the screws.

Miter box. Allows you to cut wood at an angle, it may be useful when connecting the elements of the door frame.

Using these tools, you can easily complete the door installation procedure, which consists of several steps:

• Dismantling the old door frame;
• Placement of the door block;
• Installation of accessories on the canvas;
• Installation of the box in the doorway;
• Adjustment;
• Hanging the canvas on the hinges.

Hand tools are not very expensive, electric ones are more expensive. It should be understood that instruments are bought at long time and can serve a lifetime (with proper care).

How to install doors economically?

It is already clear that without a quality tool, it is impossible to properly complete the door installation procedure. Of course, it is better to make the choice towards professional quality tools, however, this will inevitably entail certain material costs. However, if you don't use a good tool, the results are likely to be disappointing. Currently, there are many companies on the market that rent out various fixtures for repair. For little money, you can get the whole required set- both manual and electrical devices.

When installing doors, you can use various tricks. For a better installation of any fasteners, it is better to pre-drill holes for them using a drill or screwdriver. Both the drill and screwdriver allow you to tighten screws and bolts at impressive speeds. It is better to use a drill and screwdriver with a comfortable handle, since this allows you to protect yourself from possible injuries, and an expensive door from damage.

In cases where a veneer or PVC door is installed, it is better to use a router. A pneumatic gun can be used to fix the platbands.

So, tools for installing interior doors can help you complete the job quickly and efficiently. Their use should not be neglected, since it was the tools that allowed man to become the dominant species on planet earth.

We can start preparatory work before installation metal door and consider a list of basic tools and materials that may be required to do this job.

The selection of the tool depends on which version of the door fastening you have chosen and on the place of installation (wooden house, stone house or apartment). To install doors in a stone house and an apartment, you will need the same tools to carry out installation works v wooden house slightly different tools and materials are used.

Front door dismantling tools

In the event that the work on installing a new front door starts with carrying out, then first we will consider the main types of tools that may be required to do this work: