How and what to clean the blockage in the bathroom. The solution to the age-old problem: how to easily clear the blockage in the bathroom and sink

Blockages periodically form even in the most tidy owners. The accumulation of mechanical particles, grease and other debris in the sewer pipe leads to the formation of a plug that prevents the water from draining. Having an idea of how to clear a blockage in the bathroom, it is possible to fix the problem easily and in a short time.

Causes of pollution

Even good pipes get clogged from time to time.

The drain pipe in the bathroom is clogged due to the fact that they settle on its inner surface:

Threads from clothes when water is drained into the bathing container after hand wash and rinses.
Hair of any length.
Fur of pets.
body fat.
Remnants. No wonder, after all hygiene products have a fatty base, therefore, it also takes part in the formation of blockages.

As a result, the pipe from the inside is overgrown with a layer of debris, which eventually narrows the clearance in the pipe. A dense cork is formed. Once it completely covers the cavity and makes it impossible to drain the water, and hence the use of the bathroom.

Possible Solutions

Bathroom clogs are more difficult to clear than sinks.

Exists different ways problem solving. In some cases, special plumbing fixtures help, in others, improvised home remedies, and in others, household chemicals from the store.

Folk remedies

First you need to scoop out dirty water from the bath, pour half a pack into the drain baking soda, and after 10 minutes, pour 100 ml of vinegar into the hole. If there is no result after an hour, add a few liters of boiling water. You can do it differently: first pour in vinegar, and then boiling water with dissolved soda.

Method 1: water and baking soda with vinegar

Really clean up heavy blockage hot water. If this was not enough, it is recommended to connect vinegar, baking soda, and table salt.

Method 2: water with washing powder and soda with salt

Pour half a glass of salt and the same amount of soda into the drain and pour two to three liters of boiling water. After an hour, add a handful of washing powder and turn on the hot water.

As a rule, these options allow you to cope when the main cause of blockage is fat.

How to clean a blockage in the bathroom with a cable

A plumbing cable is a thick wire twisted in a spiral. For convenient use, one of its two ends is equipped with a handle made of wood or plastic.

Pipes are cleaned as follows:

Insert the end of the spiral into the drain hole.
One person rotates the cable by the handle with rotational movements, while the other at the same time pushes it deep into the pipe so that it goes through its bends as much as possible.
As soon as it becomes noticeable that the voltage in the pipes subsides, pull the cable several times and remove it.

There are devices with a hook at the end. They allow, having stumbled upon a blockage, to turn the wire, hook and remove the plug. This is convenient if it is not formed too deeply.

How to clear a blockage in the bathroom with a plunger

Before starting work with a plunger, close the overflow hole

When a washcloth made of hair became the cause of poor drainage in the bath, a plunger can help out. It perfectly cleans pipes from other types of mechanical dirt. Necessary:

If the bath is dry, add some water to it.
Place the plunger over the drain hole so that the rubber nozzle completely covers it.
Firmly take the plunger by the handle and move it up and down with force, without lifting the nozzles from the bottom of the bath. It's about the same as pumping hand pump bicycle wheel.

One minute of intensive work is enough to move the blockage from its place. When the dirt floats, you will have to pump the drain a little more with a plunger for the best result. Floating debris must be thrown into a bucket so that it does not get sucked in again. After that, it remains only to wash the bath.

How to get rid of the problem with household chemicals

Compositions for cleaning drain pipes can be bought for moderate money at a hardware store or hypermarket department. They give excellent results, and in terms of efficiency they are comparable to mechanical devices.

Mole

The composition has been used in liquid form for decades, and today it is also available in the form of a gel and powder. "Mole" is an inorganic alkali enriched with other active additives that dissolve dense debris.

Tiret Turbo Pipe Cleaner

It is a highly effective gel for quick removal blockages. It has a thick consistency, thanks to which it quickly penetrates deep into, eliminating the blockage in 5 minutes. The composition of Tiret Turbo includes antibacterial elements and fragrances. It is suitable for metal and plastic pipes.

Deboucher

Another powerful remedy for debris and greasy plugs in pipes. It contains chemically active components that ensure a quick and effective action of the product. The instructions say that you can clear the blockage after one hour, but this happens much faster.

Using chemical compositions, it is important to remember the means and rules of individual safety so that the procedure does not harm health. detailed information on this topic is always available on the packaging or in a paper application. In extreme cases (for example, if the font is too small), it is not difficult to find it on the Internet. As for general recommendations, they boil down to using:

rubber (household) gloves, which can be replaced with a double plastic bag worn on the hand;
medical mask for respiratory protection.

How to clear a blockage in a bathtub siphon

In some cases, to eliminate the blockage in the bathroom, you need to clean the siphon. It is done like this:

They cover the floor with a soft cloth and put an empty basin.
The lock nut is removed, followed by the flask, after which the water with debris elements will begin to drain.
The empty siphon is washed by hand, carefully cleaning the walls from plaque.

Having assembled the structure, it should be installed back in such a way that the drain pipe does not literally lie on the flask. If you ignore this, the water seal will break. To check the degree of tightness of the joints, as well as connections, open the tap and fill the water seal with water.

Anti-clogging magneto-mechanical brush HELPPIK (HELPPIK)

It has been on the market since 2010 and has a reputation for being efficient and a simple remedy, allowing you to get the trash out of the siphon. This is a stick made of plastic, with notches and built-in magnets. Its length is 38 cm, and its diameter is about 5 mm. The ruff is inserted into the hole of the siphon grate and scrolled. In 10 seconds, he will collect the blockage. The stick is easy to remove and does not slip. The presence of magnetic elements allows you to get small metal objects. The ease of use of the device and its functionality are confirmed by domestic housewives.

How to clear a strong blockage

In this case, it is recommended to start with a cable and a plunger, combining their use with powerful means household chemicals. If there is no effect, then the cork is hard, large and deep. Such a strong blockage can only be cleaned by professional plumbers.

They can be invited by contacting management company or local housing office. When the matter is urgent (masters can come the next day), it is easier to contact a specialized commercial company. Often, those who are engaged in the installation and dismantling of plumbing offer services for cleaning pipes.

Problem Prevention

Hot water will help get rid of body fat

One way or another, you can always deal with a blockage, but every time it is extra trouble and expense. To make your life easier, you should pay attention to prevention. For this you need:

Equip the drain hole of the bathtub with a device for collecting hair, threads and other mechanical debris. Items can be purchased at the store. They represent different variants plastic traps.
Periodically pour a little of any store-bought liquid or pipe cleaning gel into the drain.
At the slightest suspicion of a blockage (for example, when the water does not leave the bath as quickly as it should), use a plunger.

Compliance simple rules It will help to get rid of the problem of blockages, as well as ensure maximum patency of the sewer.

The above cleaning methods are not difficult for an adult, even if he is not a professional plumber. It is important to remember that normal work drain pipe completely depends on the prevention of plaque and dirt, as well as on the elimination of blockages at an early stage of their formation.

If water began to slowly drain in the sink or shower, then there is reason to believe that the pipeline is clogged. To fix the problem, you need to know how to clean the blockage in the bathroom with soda, vinegar and other improvised means.

To fix a problem, you must first determine the cause of its occurrence. If you frequently bathe your pets in the bathroom or clean fluffy textiles, they are the cause of clogged drains. In this case, a lump of thread, hair, fat, soap residues formed in the bend of the pipe, which not only interfere with the normal flow of water, but are also sources of bacteria and bad smell.

Photo: blockage in the bathroom sewer pipe

If you have metal pipes, then perhaps they are clogged due to mineral build-up. It happens mostly in houses. old building, because earlier only cast-iron or steel pipes. If you are sure that the problem is in the "overgrowth" of the inner diameter, then you cannot do without the intervention of a specialist.

How to eliminate

The easiest way that can be implemented at home is to fill the pipe hole with soda and add vinegar. You will need:

Half a pack of regular baking soda;
Half a glass of vinegar;
Hot water - as much as possible.

First, you need to pour soda into the drain hole, then wait 10-15 minutes, and pour vinegar into it. Be careful it starts chemical reaction, due to which pairs will appear. To protect yourself from their effects - after pouring vinegar, you can not be directly above the drain hole. After half an hour of exposure, pour a few liters of boiling water into the pipe and wait. Most often, simple blockages dissolve very quickly.

If the problem is serious and the hairball cannot dissolve the soda, then you can use special cleaning products. Any store sells "Mole". This is a powder designed for cleaning pipelines. It consists of serious chemical reagents, therefore it is able to dissolve almost any blockages (except for mineral ones). You just need to pour it into the problem drain and rinse it off with hot water after half an hour.

Video: Blockage in the bathroom. How to eliminate?

Eliminates odor very effectively and at the same time cleans the Domestos water passage. This tool dissolves not only fatty blockages, but also hair with dirt. For exposure, pour two caps of detergent into the bathroom pipe and leave for the maximum possible period of time. Best of all - at night. In the morning, rinse the communication with hot water. This method cannot be used to clean a clogged pipe if it is made of plastic - active substances can dissolve the molecules of the material and over time the pipe will leak.

How to get a blockage with a cable

Sometimes you can clean the lump that caused the blockage in the bathroom by hand.

Scheme: How the cable works

It is necessary to remove the cover that protects the downpipe from foreign objects;
Then insert a special plumbing cable into the hole. Unlike the wire that is used for the toilet, the cable for the washbasin or bathroom pipe has a smaller diameter, respectively. It's more flexible;
When introducing, it is necessary to gradually twist the wire so that it can pass along the bends of the pipeline to the site of blockage;
It remains to push the garbage to the main pipe. According to SNiP, the drain leading from the sink has a smaller diameter than the main sewer pipe. Therefore, if debris gets into a large communication, it will simply pass without problems and free the pipe.

At home, craftsmen also use ropes with a hook on a horse. They are designed not to push through the blockage, but to get it out. This technique is very effective for blockages close to the drain surface.

You need to take the wire and bend it at the end;
Enter the cable into the pipeline, scroll it gently;
Gradually push it inward, as soon as you feel resistance - turn the wire and hook the blockage with the tip.

If you need to quickly clean a small blockage in the bathroom, formed from hair, you can not do without a plunger. This universal tool, which perfectly copes with any type of mechanical pollution.

Fill a sink, bathtub or shower tray with some water;
Place the plunger over the water drain hole, then press it so that it sucks air from the pipeline;
After that, make several movements that contribute to the movement of the blockage inside the pipeline. It is very important, when you finish the work, to abruptly release the plunger so that water under a certain pressure enters the pipeline.

After that, you can use improvised means that will remove the remnants of grease and debris from the inside of the pipe.

How to clean a siphon

Sometimes the problem is not a clogged pipe, but a dirty siphon. In this case, it is required to clean this part of the sewer directly. Before you remove it, you need to place a container under the knee to collect water.

Using necessary tools, remove the nut and gasket that hold the siphon to the elbow. When removed, water will pour out of it, which has lingered in the pipe, so it is better to work with latex gloves. Then remove the debris from the knee and rinse it detergents and hot water, be sure to wipe the inside of the pipe with a brush - this will remove hair and other contaminants from it. Reinstall the siphon.

After installing the knee, it is advisable to spill it with a solution of vinegar and hot water - then eliminate bad smell from the pipeline. Sometimes home craftsmen use bleach, but it destroys sewer materials.

What is the best way to clear a blockage in a pipe? This is not an easy task, so many owners call a master whose services are paid. And so that the money remains in your wallet, and you don’t have to spend time waiting for a specialist, you can try to do everything yourself.

Why do pipes get clogged, how to clear a blockage in a pipe? The main cause of traffic jams is accumulated debris over time, soap residue, dirt, hair, and so on. Clogging suggests that water does not drain well or does not pass into the sewer at all. If the pipes are not cleaned in time, this can lead to flooding of the house, and in apartments, in addition to the fact that the bath will deteriorate, the neighbors below will also suffer. Therefore, before calling a plumber, you must first try to clean the pipes yourself.

Easy Ways to Clear Clogs

If you are faced with a blockage problem, there are several options for getting rid of it at home. Before you start cleaning, you will need to remove the visible causes of blockage (dishwashing residue, hair and other debris). Then you will need the easiest to use and inexpensive remedy for blockages - a plunger. Such a device is already for a long time helps the owners both clean the blockage in the bathroom and eliminate it in any other bathroom.

Whether it’s a clogged sink or tub, fill everything with water and plug the overflow hole with a rag. This is necessary so that when using a plunger when the sewer pipes become clogged, the pressure created by the water does not decrease.
Install the plunger over the stack hole, pressing down on the handle to pressurize the pipes. It is necessary to pump water several times, then sharply remove the plunger. The blockage should move to either side of the pipe.
If this does not happen, you need to boil the kettle and pour hot water directly into the drain. Then repeat the procedure with the plunger several times.

If it doesn’t help, the second method will definitely break through the blockage in the bathroom, since the blockage will be split by boiling water.

In addition, there are many ways to clean the drains in the bathroom using improvised means. Knowing them is useful, since such a problem is most often taken by surprise. To use folk remedies for cleaning, you will need a plumbing cable. It looks like a flexible steel spring with a spiral at the end.

First you need to put a container under the siphon.
Then remove it in order to see if it is clogged with debris, if necessary, clean it.
Next, insert the siphon back into the sink and turn on the water.
If it also continues to accumulate, then the spillway is completely clogged and pipe cleaning is required.
It is necessary to remove the siphon again and place the plumbing cable into the pipe.
At the first resistance, turn it clockwise. Most likely, it will be overcoming the first bend. And the next cleansing jerk will eliminate the cork. We push the cable and pull it out, collecting debris on it.
If the device does not pass, you do not need to push it there by force. It can break and stay there, and the pipes in the bathroom become unusable.

You can make an analogue of a plumbing cable yourself, there is a good and easy way. To do this, wrap a bottle (2 l) with paper (the thickness should be 2 cm). When it forms a spiral on the bottle, you need to circle it with a marker.

Next, you need to cut out the circled pattern, starting to cut from above. We make a handle from the bottom of the bottle. Then, along the entire spiral on both sides, we make notches, the so-called teeth. A home-made plumbing cable has formed, with which you can try to clean the pipe.

Effective cleaners

Today on the shelves of shops you can find a lot of chemicals, which will help in the question of how to eliminate blockages in the bathroom or sink. But there is a slight difficulty, because you need to decide what is the best way to do this. Sometimes it is difficult to choose from the abundance of chemicals that will really cope with the problem: it will be able to break through the blockage in the bathroom and make sure that the pipes will not become clogged in the near future.

Before using chemistry, it is still recommended to attempt to clean the pipes mechanically (cable, plunger). Any procedures for cleaning blockages with chemicals harm the material, which is especially true for plastic pipes.

Several simple ways and improvised means that will tell you what to do if this has already happened:

We save pipes with chemistry

There are many household chemicals that can be found in any supermarket. For instance:

Mole for clearing pipe blockages;
Domestos;
Mister Muscle;
Potkhan;
Typhoon.

Basically, to clear blockages, such products are poured into the sink, bathroom and left for half an hour. For more information, see the instructions that come with the pipe blockage products. It is best to leave it overnight or for a long period, so that it not only removes the blockage, but also cleans up all the dirt behind it, due to which the pipe is clogged.

Even if the house has been renovated, this is not a guarantee that the pipes will not clog over time. It would seem that new pipes are a way out, because old ones, in addition to user debris, can become clogged with many other products - rust, metal peeling, etc.

Just for new plastic pipes, there are restrictions on clearing the blockage. For example, as mentioned earlier, cleaning chemicals can damage the material, especially PVC. Therefore, it is not worth rushing to “save” pipes in this way. If they are new, it is enough to break through the blockage with a plunger.

From now on, you need to try to prevent food debris, hair and other things from getting in, because of which the drain in the sink or any other plumbing can become clogged. At the same time, it is useful to periodically carry out preventive measures so that the plumbing does not become clogged.

Video instruction

The situation when the water in the sink “does not want” to go through the pipes is familiar to many, so it is important to know how to clean the blockage in the bathroom. In this case, there are several options: chemicals or improvised. They have different efficiency and safety of use. The key in the fight against blockages is systematic, because the slow outflow of water does not happen just like that, you do not need to wait until the pipes are completely clogged.

Plastic device for pulling blockages from pipes called "snake"

Folk ways for cleaning pipes are also very effective

Why does clogging occur?

Before you start the fight, you need to know the enemy in person, which means to figure out what are the causes of blockages. The first, and perhaps most important, is human life. It is not always possible to control what and in what volumes gets into the sink, and hence into the pipes. The most difficult in terms of clogging are:

The hair, the longer, the more reliably the pipe is clogged.
Animal fur.
Pieces of rags (rags).
Paper, napkins.
Items that should not be in the pipes.

Blockages are different, and vary in the degree of passage of water. If it does not leave at all, then this is a complete blockage, this occurs if a cork of loose debris has formed in the pipes, the same hair, wool, paper. If the water leaves, but more slowly than usual, then this is an incomplete blockage. And this is even worse, because over time, an unpleasant smell will also be added to the difficulties with the outflow of water, because what is stuck is in a “favorable” environment with high humidity will start to rot and give off a smell.

incorrect operation. Do not wash pets in the bathroom, carpets;
incorrect installation of the piping system. If there is insufficient slope or sagging pipes, blockages will be common.

Note! It is possible to deal with blockages, but it is easier to prevent their formation.

Blockage Prevention

Preventive measures boil down to preventing foreign pipe debris from entering the sink. Preventing blockages is easier if it becomes a habit. Key measures:

Install a special mesh with small holes in the drain hole. She will not hold everything, but a lot of garbage remains on her.
Carry out preventive cleaning from time to time in the following ways.
Regularly - once a week, pour boiling water over the pipes. The volume of water is within 2-3 liters. This will wash away soap deposits on the walls.
When replacing pipes, check correct angle tilt.

How to clear a blockage in the bathroom: plunger

Using a plunger is the most common way to clean a blockage in the bathroom at home.

Note! Using a plunger is an excellent prevention of the formation of soap scum on the pipes in the bathroom.

It would seem that the most traditional way, but for its implementation you need an understanding of the process. If the blockage has formed in the sink, then cleaning is quite simple:

install a plunger on the drain hole;
make 10 sharp movements up and down.

Often this vacuum is sufficient for cleaning.

The bathroom is another matter. All due to the fact that there is another system for draining water. When water overflows, air enters the opening, and in such conditions it is impossible to create a vacuum. You need to act like this:

Close the hole for pouring water tightly with a cork.
Lubricate the plunger with Vaseline and press it against the drain.
Make 10 reciprocating movements. The sharper the better.

Note! When cleaning a blockage in the bathroom, you need to close the hole for pouring water well, just don’t plug it with a rag - this will not give the desired effect. The best solution it is to use another plunger, but this requires an assistant.

If this does not help to “break through” the blockage, you should use another method. To do this, draw water into the bathroom, and it must be hot. Level - half the height of the rubber cup of the plunger. The latter is immersed in water at an angle. At the last pitching down, the plunger must be pulled out of the water. Repeat the procedure several times if necessary.

Plumbing cable

The previous method is only suitable if the blockage is minor, it cannot cope with a serious blockage. Option - plumbing cable. It is suitable if:

Blockage deep in the pipe.
The “cork” that closes the outflow of water is strongly compressed.

The essence of the method is to get rid of the blockage mechanically, pull it out or push it deeper into a wider pipe. The length of the standard cable is 3 meters, and this is quite enough to extract deep blockages.

The technique of using the cable is simple, but it must be clearly maintained. Sequence:

the cable is inserted into the drain hole;
one person pushes, the other rotates the cable. This contributes to the destruction of the blockage and prevents the cable from breaking at pipe bends;

after the blockage has been passed, you need to make a couple of jerks back and forth. Opening after that hot water, you will wash away the dirt that has formed on the pipe;
Now you can carefully pull out the cable.

Such a cleaning tool can be purchased at any hardware store.

Note! It cannot be used for plastic and chrome pipes, the design of the cable may damage their inner surface.

Special funds

Ready-made chemicals that can get rid of blockages, the choice is huge, as well as the expansion of prices. Before you clean the blockage in the pipe in the bathroom with one of them, you need to familiarize yourself with the recommendations for using such products. If the blockage is running, then it will not be possible to do without chemical means, you will have to use the mechanical ones presented above to help.

Advice! When choosing, preference should be given to where it is indicated that it dissolves wool and hair.

Important Tips:

Powder and liquid products do not differ in effectiveness.
When buying, check with the seller whether the product is suitable for the type of pipes that are in your home.
Liquid products should be poured directly into the drain hole, powders after falling asleep, pour hot water (1 cup).
After the time specified in the instructions, spill the pipes with hot water in order to rinse the pipes well and remove debris.
When using these products, it is important not to use the bath for a while. It is best to clean at night.

Note! When using any chemical agent, it is important to strictly follow the instructions. After all, even the highest quality of them cause damage to the pipes.

Specific means

In the store in the thematic section, you can get confused, but there are a number of products that are especially popular with consumers. Among them:

"Mole" is a long-known remedy used by our mothers and grandmothers. But it cannot be used for plastic pipes;

"Mr. Muscle" is suitable for all pipes. Active substance penetrates all nooks and crannies sewer system. In addition to eliminating various types of blockages, it removes bacteria, thereby eliminating an unpleasant odor;

"Tiret" - eliminates blockages quickly. Has no smell of ammonia;

"Pothan" - dissolves all types of blockages, and quickly.

When working with any chemicals, use latex gloves, oilcloth apron and goggles.

After using the product, if there is a siphon in the bathroom and kitchen, it must be thoroughly cleaned.

Folk methods

If you are looking for methods on how to clean a blockage in the bathroom sink or in the bathroom itself and do not want to use chemicals, but mechanical methods for some reason they cannot be used, folk methods will come to the rescue.

There are many dubious methods that will not only not be able to get rid of the blockage in the pipe, but will also lead to additional expenses. Among them:

Use of a vacuum cleaner. handset household appliance bring it to the drain hole and turn it on at full power. The results are deplorable, and the most minimal of them is the purchase of a new vacuum cleaner.
Citric acid is simply not effective.

In practice, the effectiveness of soda has been confirmed, and it can be combined with salt or vinegar.

soda+vinegar

To implement this method, the following ingredients are needed:

soda;
vinegar (it is best to use white distilled);
boiling water;
rag or washcloth.

Cleaning sequence:

Pour half a package of soda into the drain hole. It is important that the soda is dry.
Pour vinegar in a volume - 0.5 tbsp. It's good if you warm it up a bit. Cover the opening immediately with a cloth. This will keep the volcano that forms from the baking soda and vinegar inside the pipe.
Leave everything like this for 30 minutes. During this time, the debris that blocked the outflow of water will dissolve.
Then boil the kettle.
As soon as the allotted time is up, pour boiling water into the hole.

If it was not possible to immediately completely get rid of the blockage, then the manipulations should be repeated.

soda+salt

Another option, how to clean a blockage in the bathroom with soda, is even easier to implement. You need to take 0.5 cups of salt and soda, hot water. Cleaning sequence:

Pour soda and salt into the drain hole.
Add 1.5-2 liters of boiling water there.
Leave for 8 hours. It is important that this drain period is not used.

Pipe cleaning is a simple task and there are many options that are suitable for different type pipes. When using them, you must follow the instructions and safety measures. But still the most simple option is prevention, and it is quite simple. You just need to get used to the fact that the pipes should be flushed regularly.

Sewer systems can become clogged not only in multi-apartment buildings, but also in private homes. Inner side pipes accumulate fat deposits, soap deposits and other debris, which serves as a barrier to the passage of water. There are many ways to clear a blockage in the bathroom or kitchen, as well as minimize the likelihood of a similar problem in the future.

Causes of blockages

Pipes can become clogged the following reasons:

Effective cleaning methods

To eliminate blockage in the bathroom, you can use one of the existing methods:

Pressure cleaning - in this case, a classic plunger is used.
Mechanical - debris is removed by disassembling the siphon or using a plumbing cable.
Chemical - corks are dissolved with industrial facilities containing harsh chemicals.
Thermal - you can eliminate the blockage with the help of hot water pressure.

The choice of method depends on the material from which the pipes are made.. Plastic products can be damaged by boiling water or a cable, and the use chemicals can only be carried out in strict compliance with all manufacturer's recommendations.

Cleaning with a plunger

The plunger remains easy to use, affordable and popular when it comes to clearing a blockage in a bathroom, toilet or sink. This device is in the form of a handle (plastic or wooden), one side of which has a rubber nozzle. Under the influence of its pressure, the debris accumulated in the pipes begins to move along them and collapse. With the help of a plunger, as a rule, it is possible to get rid of blockages, they are freely brought out and removed.

But to clean the pipes like this simple fixture, you need to use it correctly:

When using a plunger, it is extremely important that the water level in the sink or bathtub does not exceed the rubber valve. To remove the remnants of blockages and achieve the best result, a repeated procedure will allow.

Household chemicals

There are many ways to clean the drain in the bathtub and sink, but one of the most popular is the use of household chemicals. With its help, it is possible to effectively break through all blockages without replacing parts. The advantage of these tools is that they do all the work themselves, a person does not need to make physical efforts.

These products are characterized by a different consistency: foam, gel, powder and liquid, they can also cost in different ways. The principle of their use is simple: the required amount of cleaning agent is poured or poured into the drain and left for a certain time, which should be indicated on the label. After this time, the water must be turned on, which will ensure proper flushing of the pipes.

The use of any chemicals requires attention. Their contact with the skin or mucous membranes is unacceptable (all work must be carried out with protective gloves). In addition, it is not recommended to allow the product to come into contact with chrome-plated surfaces.

In order not to remove blockages, you should regularly carry out preventive procedures using household chemicals: a small amount of chemical liquid or gel is poured into the drain hole, after which hot water is turned on to flush the pipes.

Siphon cleaning

Replacing parts is a last resort, in most cases cleaning the siphon is sufficient. The algorithm of actions should be as follows:

This method of cleaning is recommended to be carried out regularly for prevention. Rinsing the siphon once every 2-3 months will minimize the formation of fetid deposits on its inner surface, which cause an unpleasant odor in the room.

Using boiling water

If the blockage in the sink is taken by surprise, then you can use a simple and often effective way pipe cleaning - boiling water. The effectiveness of the method lies in the fact that, under the influence of high temperatures, dissolve fat, which causes most blockages.

First of all, it is necessary to assume the scale of the problem: if water has accumulated in one place, then the blockage is local in nature, and when water is in all drains, then the blockage is considered to be global. The solution to this problem is to clean the entire sewerage system, and with a local one, it is enough to clean one pipe.

You can use boiling water only if the plumbing system is made of metal pipes. The principle of operation is very simple: you need to heat up to 4 liters of water, and then send it to the drain. If necessary, cleaning is repeated. To achieve the desired effect, it is recommended to use a plunger or brush.

You should refrain from boiling water if water accumulates on the surface of the bathtub or sink. It should be taken into account that boiling water simply cannot affect trouble spot. In addition, you should be careful not to scald. For plastic pipes, you can use hot, but not boiling water.

metal cable

The debris accumulated deep in the pipes is unlikely to be eliminated with the help of household chemicals, boiling water or a plunger. In this case, it is recommended to resort to the use of a plumbing cable. This cable is characterized by the appearance of a thick twisted wire, one side of which is equipped with a drill, and the other with a handle. The length of the cable reaches no more than 10 meters, which is quite enough to eliminate the blockage. It should be borne in mind that this device is only suitable for dealing with contamination of metal pipes.

To successfully carry out cleaning, you should use the following recommendations:

The use of folk remedies

Remove blockages in sewer pipes time-tested folk remedies will help. Such procedures for removing blockages are easy to perform, environmentally friendly and do not require large financial costs, since ordinary soda is the active ingredient. Why not be convinced of the effectiveness of the product on your own experience, if the bath is clogged.

Let's take a closer look at how to clean blockages at home:

Table vinegar and soda should be prepared in proportions of 1: 1, but not more than one full glass of each component.
First you need to pour soda into the drain hole, and then pour the vinegar solution on top.
The drain is closed with a stopper and left to rest for at least 3 hours.
After this time, the pipes must be thoroughly rinsed with boiling water.

What to do if the pipe in the bathroom is clogged, many sources will tell you. Based on the feedback from households, effective folk remedy is a fragrant lemon. To eliminate the blockage, you will need to purchase several large citrus fruits and squeeze the juice out of them into the drain hole (it is important that the bones do not get there). Leave at rest for at least 1 hour, after which you can start using the bathroom or sink in the usual way.