Frequently occurring dishwasher breakdowns. Bosch dishwasher does not wash the dishes - the reasons stopped working dishwasher

Dishwasher (PMM) - a wonderful assistant for the hostess in the kitchen. She is able to work for years to work reluctantly and please their owners with impeccable quality of utensil washing and its functionality. Sometimes during the operation, you begin to notice that the dishwasher is badly washing the dishes.

Some of the hosts are negligurated to different factors affecting high-quality washing, explaining such an attitude that the device and so well copes with its task. But if you have noticed white divorces on plates, food remnants or falls, then the cause of trouble can serve:

unreasonable preventive cleaning PMM parts;
incorrect operation of the machine by the user;
incorrect dosage or replacement special Tools for washing third;

Dishwasher, like any household appliances, requires careful care and timely cleaning separate details and nodes. The following items are subject to regular cleaning in the unit:

Washing PMM with use special tools It should be done 1 time in half a year. And it does not depend on the frequency of use of the aggregate.

After each completion of the Utensarian washing program, the device should be checked for food residueswhich can be in the tank of the car or under the door, especially if it is dishwasher bosch car.

Incorrect operation

The reasons for the fact that the dishwasher is badly washing dishes may be in typical errors using the aggregate hostess:

the user loads a very large amount of dishes and cutlery;
utensils in baskets fit incorrectly;
the wrong washing program is selected.

The instructions describe in detail about proper placement Dishes in baskets. This issue of the manufacturers of PMM (Electrolux, Siemens, Bosch) pays great attention. Therefore, it is recommended to carefully read these tips before using the device.

One of the most important rules The arrangements of the utensils in the basket is the location of it in such a way that there are lumens between her, and water could flock down without staying in plates.

It should also be paid to the fact that the dishes in the lower basket do not overlap the flow of water to the top basket. Mixed utensils should not interfere with the opening of the compartment with the tablet, as well as the rotation of the rumor. The content is loaded more, the more dense it is located. That tight accommodation It interferes with good water circulation with soap solution, and it can remain not washed.

Another reason why the dishwasher does not work efficiently - this is a choice incorrect programFor example, for washing a strongly contaminated utensils. At the same time, a fast washing is launched (in this mode, water heating goes to a temperature of 45-50 s °). In this case, with a highly contaminated content with dried residues, you should not expect a quality sink (it will be more correct to choose a washout program with soaking). This is also described in the instructions for an aggregate, which few people read.

In order for the machine filter less contaminated, before loading utensils in the device, clean it from food residues.

Replacing detergents or incorrect dosage

The following possible reasons for the fact that the Electrolux dishwasher does not work and similar to it - Bosch, Hansa and others can be directly related to the use of detergents. More often such a problem occurs due to shift detergent on the poor-quality or fake. This trouble is easily eliminated if you return to the previously used medium. Also, you can try to choose detergent until the highest quality and efficient option is found. In case you deteriorate not changed, and the dishwasher sometimes began to wash the dishes, the problem may be in incorrect dosage funds.

If the user refuses to apply a special salt, which restores the ability of the ion exchanger to soften water, then with time (if the rigidity of water in the highway is high) it is clogged and fails. The use of comprehensive tablets "3 in 1", with very hard water, it is not possible to replace the salt and everything else needs to be added to the unit.

When you need to call masters

The reasons were addressed above poor wash Cookware dishwasher, which are obvious and can be eliminated without contacting the service center. But there are moments when you can't do without calling the wizard.

These faults are eliminated only by a qualified specialist who have knowledge and experience in this profile of equipment. Only the master is able to diagnose and repair the device. With independent attempts to do this, you can get a deplorable result, and even a specialist can not be corrected by the consequences of your actions.

The device that helps housewives in households is very difficult. Despite this, some service actions (cleaning filters, additional setting) You can do it yourself. Some recommendations described in this article will help perform repairs. dishwasher do it yourself.

Consider how the principle of device data is operating. You can smash the entire wash cycle into several stages:

preliminary sink;
basic;
rinsing;
drying.

These devices have both conventional modes of operation and several non-standard. The dishwasher is powered by the water supply, and the water fence occurs through a special salt softener. Water under pressure in the system enters the car through inlet valve. Float and pressure switch is intended to adjust required amount water. If the water typed enough, water overlaps and begins to warm.

It is heated to a temperature required for a certain stage during washing. For example, the rinsing cycle involves a high temperature, so that drying happened as quickly as possible.

After the water is heated, it is injected with a pump into a wicked area, where it is spared around with splinker nozzles around. The jets are directed in such a way that the impeller rotation is created.

Water that has already been used is applied to washing again, it becomes possible due to several filtering steps. During washing to the workspace, some, asked by the program, the amount of washing agent is supplied. Filtration occurs during the entire washing process, and only at the end of the water is displayed in the sewer.

After this cycle ends, the drying time comes. There are several types of this process:

Turbosushka. In this case, heated wet air It is displayed with a fan.
Condensation drying. Here, the drying is performed using a temperature that turned out due to rinsing. At the same time, the pairs are assembled on the walls and flows down.

Before washing, all the dishes are loaded inside the machine on special shelves that reliably hold it during the entire process. Thanks to the rotation of the sprinkler blades, water falls on all areas of dishes.

We find out which malfunctions are most often manifested by the methods of eliminating them.

The device does not respond to keystrokes. There is no indication

If there is no indication, the first thing is necessary using a tester or multimeter to check the voltage in the network. If the device shows that there is a voltage, then without opening the device can not do. For cases where there is an indication, but the pressing of the buttons do not lead to anything, you can check whether the door is closed tightly. If it did not help, the disassembly and finding out why the dishwasher does not function. Repair with your own hands in this case implies the following actions.

Most machines near the main panel have a terminal bar. Voltage comes to it and with the help of controls is distributed further. The first thing you need to open and check the quality of the contacts. Due to the fact that they can oxidize electrical connections Can be broken. In this case, it is necessary to clean the contacts, and maybe then you do not need the further repair of the dishwasher with your own hands. "Ariston" recommends asking for help in original service centers.

If the above-mentioned actions have not led to anything, the power circuit will have to be "ringing" in order to find out if there is damage. First you need to drain the water and disconnect the machine from the network. With the help of a multimeter, check the resistance lived, pre-disconnecting them from the terminal bar. If the wire is intact, the device must show if not, it means that the malfunction is found, and the cable should be replaced. It can be replaced by himself. Well, if this does not help and the dishwasher does not work, the most correct decision will not be at all the repair of the dishwasher with their own hands (Bosch, including). However, manufacturers themselves recommend contacting official service centers.

If you have deep knowledge of electrical engineering, you can try to find a malfunction and repair the dishwasher with your own hands. This will help the principal electric hammers of your car. Again, using a multimeter, you must check all the elements of the chain, and thus you can find a burnt or spoiled element.

For those who are weakly disassembled in electrical engineering, the small memo to read the schematic diagrams is presented below:

For ease of finding a faulty section of the chain using abbreviations on such schemes, the colors of the wires are indicated. Black - VK, TR - yellow-brown, W-VC - black and white, Br-o - brown-orange.
Terminum marks are indicated in the circuit in the form of circles. These places are subject to rupture when checking a multimeter.
The dotted edge says that the contacts enclosed in it are located in some block (push-button panel, relay case). In order to determine what this unit is, it is necessary to read his designation - it is somewhere near the dotted borders.

A slight retreat. The electrical chain always has both the beginning and the end. The principle is as follows: For the work of any element of the chain, it is necessary to come to it and plus, and minus. When checking the scheme, each element is considered, which has a dishwasher. Repair with your own hands will require patience and perfection.

Water supply is absent

If the fault lies in the fact that when the water is open, water is not inserted into the car, then the water supply valve is most likely failed or the filtering mesh closed. These elements can be found near the injection of water, at the bottom, which your dishwasher has. Repair with your own hands implies a disconnection of water, removing the panel and visual testing of these parts. The clogged grid must be cleaned by water pressure. With the valve check a little more difficult. Again, you will need a multimeter, with which it is necessary to measure the resistance on the outputs of the valve coil. Knowing resistance, you can make some conclusions:

Short circuit means that there is a closure of turns of the winding.
Resistance is zero - turning the winding.
If the resistance is present, it means that it is not in the winding, but in the valve itself.

Be that as it may, you have to remove the valve and acquire a new one corresponding to the characteristics of the broken.

Water fence occurs, but the car wash does not begin

First of all, you need to listen to: Does the engine work - the main element that is your dishwasher? Repair will need with your own hands and in the case of work, and in the opposite case. If it works, it means that it could either. In addition, the winding of the electric motor could be damaged. Whether this can be checked using a multimeter, similar to the valve check. That is, in the case of KZ, we have and if the resistance is zero - the winding break. Options for solving this problem a little - either replacing the electric motor, or repair in the service.

If the engine does not publish any sounds, you will have to look for a malfunction in the control circuit, resorting to the help of the concept.

Does not drop water

The most common causes of this malfunction are a plug in stock or filter contamination. It can also be a faulty pump. To check this, you must remove the pump and the multimeter to check the windings. If you cannot repair the dishwasher with your own hands, Beko and other manufacturers will offer their professional assistance.

Driving a dishwasher

This trouble may occur due to the wear of the sealer on the door. Detect wear can be visually, and if it takes place, you need to purchase a new one and make it a replacement. If the puddle was formed under the car, it should be found to be the place where she was traversed. Most often, water proceeds from the pump seal, feed hose or drain system. Repair of the dishwasher do it yourself - Bosch and other manufacturers - involves the replacement of these parts.

Strange noises

If instead of the usual noise you hear the sounds completely uncharacteristic for the machine, it is worth checking the camera to the presence of glass fragments and metal items. It is also possible that bearings were worn.

In the event that in addition to the strange sound you notice the low quality of the sink, it is possible to wear imperts. After checking the chamber for the presence of foreign objects, you should disassemble the engine and the pump to check the wear of bearings and repair the dishwasher with your own hands. "Electrolux" advises to acquire original spare parts, otherwise the warranty can be lost.

Water does not heat up

The lack of water heating can be a consequence of the malfunction of the Tan, the thermal sensor or the timer. The state of the Tan can be checked with their own hands, having a multimeter at hand. If the device shows zero resistance, then you are a direct road to the store for a new device.

The quality of the thermal sensor and timer test is independently very problematic, because for this you need to know the electronics work algorithm, which is responsible for heating. Repair of the dishwasher do it yourself - Bosch or other brands - in this case requires special vigilance.

Drying dishes

Dishwashers that have in their functionality the option of turbosky dishes are damaged in the power supply chain and fan windings. The process of checking the windings is described above, it is necessary to get to the fan, or rather its terminals. If the fan windings are integer, then it should be checked using the multimeter circuit of its power supply.

When touched the machine hosts current

Repair of the dishwasher with their own hands ("Electrolux" including) is inclined to replace one piece. Most likely, the problem is that "struck" the TEN. It is necessary to turn off the machine and remove the heating element. Visual inspection must detect its defect. In order to make sure the pierce of the Tane, you can conduct a small check.

It is necessary to measure the element itself into the container with salty water and using the multimeter to measure the resistance between it and the salt solution. If it is - it is a breakdown of isolation. However, such a check is not a panacea, some faulty heating elements Do not show ourselves on this test. The breakdown occurs due to wine and bad care. Therefore, in order not to carry out the repair of the dishwasher with your own hands (Siemens, for example, however,, like others famous marks), It is necessary to carefully operate your device.

Overheating of water in the dishwasher

It happens that, after the water enters the device, steam starts to throw out of it, and the washing of dishes does not begin at the same time. This is mainly due to the breakdown of the temperature sensor or the heating control system. Most often fails the thermal sensor. You must purchase a sensor with the same characteristics and replace.

On the dishes are formed white drips and divorces

This moment indicates that the incorrect number of the rinse is selected for the correct washing process.

If universal washing agents are used, such an effect is sometimes manifested. These funds are intended to simplify the process of cleaning the dishes. In their composition there is a rinser, however, to achieve a better result, it should be added separately. To be accurate, then clouding on the dishes is a sign of the re-fulfillment of the rinse. If, as a result, the washing of the dishes is obtained in the droplets - the amount of the rinse added added is to reduce. In this case, you do not need to repair the dishwasher with your own hands. "Indesit" and other manufacturers advise to use professional detergents, and then ensure that the dishes will be clean.

So, one day you found that the dishwasher does not turn on, does not merge water or flows. Do not rush to immediately call the masters, because sometimes the cause of the breakdown can be easily eliminated with your own hands without special skills and tools. Next, we will look at possible malfunctions of dishwashers and instructions for their independent repair at home.

What could cause failure?

If the technique served you over 5 years, and its warranty period has long expired, it means possible cause Malfunctions may be banal wear of spare parts.

In the event that you quite recently made a purchase and already dishwasher failed, then the causes of the breakage may be as follows:

Poor-quality assembly and spare parts themselves. It is found from cheap Chinese models from poorly well-known manufacturers.
Before loading dishes in the chamber, you do not wash off the residues of food that clog the filter. Very dirty plates Most of the dishwasher is not fully rinsed, as a result of which it has to be addicted to manually.
Fault outlet. Banal situation But still sometimes arises.
Incorrect (for example, the length of the drain hose is greater than the permissible value or the hose with cold water poorly fixed).
A bad detergent that does not waste well or does not wash the dishes at all.
Perhaps you just closed the door loosely (the mechanism is arranged so that the technique does not turn on until latches work). It should be noted that some models do not fix the door in the lower position. If the door does not hold it, it is not a breakdown of the dishwasher, but the flaw of the manufacturer.
Another pretty popular cause of a fault is incorrectly loading the dishes, as a result of which the technique is badly washes the bottom department or the upper shelf. Even in the instructions, properly loading is negotiated - the top must be filled with plates and circles, bottom - overall kitchenware (for example, with saucepans). Another important requirement - glasses and cups should fit upside down.

If not one of these reasons is not a culprit of failure, it means that we talk about which we will talk about.

Elimination of basic types of troubleshooting

The process of washing dishes does not start

This situation: You have included a specific mode, all indicators tanned, the sound of water filling out of the chamber, it warmed up, but the process of washing itself does not occur. In this case, probability causes of dishwasher can be:

Determine failure circulating pump It is possible by the characteristic sound of its work. If there is no noise after filling the water, most likely the cause of a malfunction in it! As you can see, the replacement does not represent anything complicated.

Workshop for repairing a dishwasher pump

It should also be noted that possible malfunction The dishwasher can be damage to the electric motor, or rather the winding. To make sure that the engine is self-functioning, check it with a multimeter for inter-touch closure and breaking the chain.

Water is overflow

Most likely, the water level sensor broke. It is located at the very bottom of the equipment, so it will be necessary to turn the dishwasher for access to access, after which the sensor replaces the new one.

We draw your attention to the fact that if the power is turned off and there is a pouring of water into the chamber, then the case is not in the sensor, but in electromagnetic valvewhich must overlap the flow of fluid. Valve replacement does not represent any difficulties.

Overheating / Water Hargends

It happens and such a case that the dishwasher overheats or vice versa does not heat the water. In the first case, the temperature sensor breaks, which entails the overheating of water, the formation of a large amount of steam and stop the work of the technique.

As for the underheating, there may be several causes of malfunction:

Does not take place

If, after the end of washing, the water does not flow into the sewer, it is possible a broken pump or the drain system is clogged, which is why the dishwasher does not drain water.

As for the first case, it is necessary to check the drain pump for the presence of garbage and the resistance of the windings. Most likely, water is in the dishwasher due to the fact that the pump just clogged, although sometimes the launch may not occur even due to pressure. If the pump is in order, check the entire drain system, including the siphon. Most likely, the hose closed, which simply needs to be cleaned, or a filter inside the chamber.

There is another frequent case when the dishwasher does not fully drain the water. Here most likely you threw too much drain hose And after a drain (when the pump turns off), part of the water returns back to the camera.

Video filter cleaning instructions

The body beats the current

If the dishwasher beats the current, then with a probability of 99%, it can be argued that the heating element is broken. All that needs to be done is to open access to Tan and visually examine it for the presence of cracks and other types of defects. If the heating element is really damaged, replace it with a new one.

The reason why TEN fails is poor water quality (too tough). Also, another malfunction may be the failure of the power switching relay. The instructions for replacing the details were visually demonstrated on the video:

Change the relay on the control module

Does not take the detergent

If you notice that the dishwasher does not take the powder or a tablet, most likely the cause of the breakage is the contamination of the nozzles or a weak water pressure, as a result of which it does not enter the dispenser. Also, a probable reason may be a breakdown of the valve opening mechanism from which the detergent is washed. If the valve does not open the water fence (or closes poorly), the tablet may not be dissolved completely, as a result of which the technique is blossoming dishes.

Lack of nutrition

If you notice that the time indicator is not even lit or the technique does not respond to pressing the button, the causes of the dishwasher malfunction may be as follows:

broken socket;
the door latch did not work, or the blocking device burned;
network button does not work;
does not work network filter.

In all cases, you need using a multimeter to check all the elements of the electrical circuit and the exclusion method find, why the dishwasher does not turn on. If in your case the dishwasher does not finish the cycle or you cannot switch the program - check the programmer and control unit, most likely the modes do not work because of its malfunction.

Foreign noise

Drying noise indicates that there has been damage to the pump bearings or an electric motor (supercharger). Bearings break due to the fact that they enjoy water, which in turn seeps through a damaged gland. The result is a dishwasher buzzing when working. In this case, you will need not only to replace the bearing, but also the gland itself, otherwise the same problem will arise again. By the way, another reason for extraneous noise can be connected with the pump - the garbage fell into the sprinkler or impeller area. Here everything is simple, remove the garbage and check the impeller for the presence of defects (perhaps already damaged blades, which causes noise).

The dishes will not dry

Some modern models Equipped with drying function washed utensils. This process It occurs when the fan installed inside the chamber is operational. If you find that the dishwasher does not dry the dishes (or does not dry), but the rest is normally functions, most likely broke the fan. All you need is to check its winding, as well as bringing contacts with a multimeter and if needed, replace the spare part to the new one. We were told in the relevant article.

Water leaks on the floor

Well, the latter, one of the most popular breakdowns of the dishwasher - the flow of water to the floor under the case.

There are four main causes of leakage:

Door seals in unsatisfactory condition, as a result of which the door is loosely closed. They need to be either changed, or if possible, clean from the plaque.
The pump seal that pumps water is damaged. It is best to replace the new one.
The clamps are poorly tightened on the drain and water supply hose, as a result of which the leakage is formed. Seals may also be installed in the connecting places of nozzles.
Damaged water reservoir, located on the side of the equipment. Most often, the repair tank is not subject to, so it is changed to the whole.

To correctly determine the place of seeping of water, it is recommended to remove the casing of the technology and put the floor of the newspaper. Where the newspaper is worst and breakdown.

Video lesson to eliminate leakage

So there are all the main malfunctions of dishwashers. We hope that now you yourself will be able to repair the technique, if it stops working, it will begin to make noise or will not merge water after washing the dishes.

Material

German quality household appliances undoubtedly, but sometimes such quality aggregates broke out for one reason or another. DIY repair Bosch dishwashers are successfully made by many home masters, the main thing is to correctly determine the reason for the refusal and eliminate all its consequences.

Some users who are absolutely not understood in difficulties household appliances, for each trivia calls to service centers. But many problems can be solved on their own:

water does not enter the unit;
water does not merge;
the product hangs when turned on.

In the above cases, you can try to reanimate the technique. First, check whether the water supply valve is open, then the door closing density, inspect the rosette, maybe the reason is its malfunction. Water may not leave due cloggingfilters or connections connections in the drain system. If everything is in order there - you need a master to diagnose all nodes.

Worked Aquastop

The display appears E15 error code? This code signals that a leak occurred somewhere, so the water fence was stopped - a typical "disease" dishwasher of this brand. The problem is solved quite simple: disconnect from the network, then neatly tilt the unit of the unit to drain the water from the pallet, while float Sensor will return to its original position.

If the error code occurs, the E15 error occurs, move neatly the car in different sides "This happens enough that the fitting float returns to the original state, and the code will disappear from the display.

The second common sore - gaskets on the site of connecting the filling hose with the system of the machine and water supply. If they are incorrectly installed, the water will be seamless, so when connecting the machine, you must carefully read the instructions.

The machine does not turn on

Immediately suspicion falls on the mechanism of the inclusion button: even though it is calculated for 1 million inclusions, but there are different cases due to weak contacts. If a house master knows how to handle the multimeter, then this is not a problem: call contact groupsTo make sure of their health.

It is worth checking the service of the power cable, the outlet - sometimes repairing the Bosch car with their own hands begins with these events. If everything is fine, then you need to test control module. At home this is not done - you need a professional master from a service center that dismails the desired part and tested it in the laboratory.

Start button on the control panel

Does not start after start

Modern models report themselves fault codeThe user remains to be completed with the table in the attached instruction manual to find out the cause. The system is quite convenient - it remains only to perform the repair of the dishwasher, focusing on the vertic toffee machine. The planned start may prevent thermostat faults, sensors, circulation pump and control systems.

Water does not come and does not merge

We disassembled one reason in detail - this concerns the aquastop system, the second may be due to the clogging of the filter. With his cleaning, it is possible to easily cope without special knowledge of the equipment - unscrew the hose of the bay, carefully pull out the mesh filter and rinse it under the jet of water.

Bulk valveLocated immediately at the filter, can also be faulty, but it is not repaired, but simply replaced with a new device. Repair details can be viewed on videos, which is a lot on the Internet.

Sometimes it happens: water enters the unit, but the car hangs on rinsing mode, in this case there are only three reasons:

Plum filter clogged - easily solved on their own.
There was a blistering of the water drain hose.
Pump requires repair or replacement.

In the first case, everything is simple: at the bottom of the working chamber (tank) net filter Coarse cleaning, near the filter element of fine cleaning. You will leave no more than 10 minutes for removal and cleaning.

Find out condition hose You can, viewing the car and visually determine its condition, if everything is normal, then the problem is not in it. To get to the pump, you will have to disassemble almost the entire car, as it is at the very bottom, besides this, the car turn upside down. Typical pump faults - clogging with unauthorized objects, and the plastic impeller is very often breaking or turning on the axis due to the blocking of the false object.

Important! Pump replacement refers to a fairly difficult repair of the dishwasher, so really evaluate your capabilities before you begin to disassemble the technique.

Before replacing the drain pump, it is better to call the supply voltage of the wire to make sure of their integrity. If you have found a defect or a break, then replace, but observe the amount of section.

Drain pump

No quality washing dishes

Quite often, users complain about poor-quality washing dishes. The reason often lies in the fact that the mode of operation was incorrectly set, but sometimes there are wines of the machine due to clogging nozzles or other annoying faults.

All the calculation of the quality of washing is based on injectors of rocker. The flow rate sometimes exceeds 150 km / h, due to the strong pressure of these basic elements working area Rotate and knocked down with elastic jets all the dirt and residues from the dishes.

Main reasons weak head Next:

clogging holes on the rockers;
clogged with a coarse or fine cleaning filter - because of this, the tank does not return the right amount water to ensure normal pressure;
temporary wear of the impeller of the circulation pump, so it cannot produce normal pressure;
small engine speed due to bearing wear And their beatings.

Clean the nozzles at the rockers is not much difficult for any user, there is no physical force here, on the contrary - it is better not to apply it when removing a fragile product. Rinse holes flowing waterIf extraneous enclosures remained - remove careless toothpicks.

Hostess for a note! The more food residues you remove from the plates before booking them in the basket, the less the filters and holes of the nozzles will be clogged, without requiring urgent repairs.

Foreign Summas

Sometimes users complain about the appearance of extraneous noise when working with household appliances. Once you met with such a problem - turn off the car and proceed to search for a malfunction so that the repair of the dishwasher does not break through a substantial breach in the family budget.

In this case, the search algorithm looks like this:

the reason may be in bearings of the circulation pump - water leaked through the glands, with all the ensuing consequences, sometimes replacing the pump;
pomp plum may also publish outsided sounds when overloading or breakage of the impeller;
rocker And their consolidation system, although such a malfunction is very rare.

There are no other sources of outsider in the car wash machine anymore.

Circulation pump

Water does not heat up

Bosch dishwasher repair professionals are very often faced with such problems, but the user independently can not cope with this if there are no specific knowledge and skills. First of all you need to be able to work with multimeter In different modes, in particular an ohmmeter.

It is necessary to check the health of the heating element - its resistance should not exceed several dozen ohm, if much more, then you can accurately approve the presence of a cliff, you need to change the TEN. Thermostatit is also subject to testing, like the entire wiring, leaving the current to the heater. The lack of current says that it is necessary to call the corresponding outputs from the control unit - no and there, it means the problem is in the module. A specialist call is inevitable, his master here is powerless.

Ten dishwasher

Does not dry the dishes

If the machine is equipped drying condensation type - Check for the rinse, because it strongly affects the quality of drying dishes, forcing excess water to flush to the bottom of the tank. Drying occurs natural way - There is just nothing to eat here.

In some modes, it does not function, so before resenting, re-read the instructions again. Turbosushkait is more difficult - it consists of a heater through which the fan is inserted into the working compartment hot air, so you need to check both elements.

Before it is worth checking the wiring for the integrity and electronic module for the issuance of the signal. Repair both items are easy: one is immediately replaced, since the heating elements are not repaired, and the second, as Surgeons say - "Opening will show."

There is current leakage

When the machine beats the current, it is extremely dangerous for all the inhabitants of the apartment and the first signal that somewhere inside there is a disturbed insulation of the wiring or there is a malfunction of the heating instrument. Therefore, there is a closure on the body - a thorough check of all electrical system. How to ring the element, we have already written, at the same time you need to check the same way all the wiring and other electrical components.

Repair of your hands Bosch brand dishwashers will cost users much cheaper than calling a service center specialist, which costs from 500 to 1.5 thousand rubles.

Statistics argue that Bosch's cars at the cost of repair occupy a firmly leading place in the world, and spare parts have astronomical prices. By doing all the work on your own, you can save a decent amount and spend it on something more pleasant in all respects. And this video will help everything right.

Dishwasher is a very important part of everyday life. big family. Mountains of dirty dishes - a situation, familiar to every hostess, which often spoils the mood, especially after a festive dinner. In such a situation, the dishwasher is a real salvation that saves strength, time, nerves, and retains good mood and purity in the house. However, like any technique, dishwashers can break. In this case, it is necessary to produce urgent repairs Cleaning dishwashers to keep harmony in the house.

Causes of breakdowns

If your device is more than five years old, then, most likely, some detail simply failed. Diagnostics and replacement of the damaged part will help quickly eliminate the malfunction. If you recently updated the technique, the reasons for the dishwasher breakage can be hidden in the following:

Cheap build or poor-quality details. As a rule, this occurs in models with suspiciously low cost. If you are the Bosch car owner, Indesin, Electrolux or Ariston, then, most likely, the reason for the breakdown is not in this.
Availability of food residues. The car is allowed to load dishes only with very small food particles. If this is not observed, the filters will be clogged, which will cause possible breakage.
No food. Frequent cause Disabled equipment is the outset outlet.
Poor-quality detergents. As a rule, such brands like Bosch, Indesit and Ariston recommended certain detergents that do not harm the car. If you get more cheap option, you will have to spend money on the repair of equipment.
Incorrect operation. This can be revealed general issues - a loose closure of the door, the wrong location of the dishes, loading items prohibited for washing in a dishwasher, etc.

These are all reasons, but how do the basic breakdowns of dishwashers look like?

Dishwasher does not start

The machine works, even completes the cycle, and the dishes remain dirty. There are several possible reasons:

Filters clogged to food residues;
The nozzles clogged and, as a result, the water ceased to circulate;
The circular pump came out of standing.

The owners of dishwashers Bosch, Indesit and Electrolux are all the first two problems. This is due, as mentioned above, with incorrect operation. Diagnostics and elimination of such problems are quite simple - it is enough to pull out and rinse the filters, and to clean the nozzles with a needle or toothpick. If the problem did not solve, then it is best to contact the service center.

It occurs overflow water

During the amount of water in the car corresponds to the water level sensor. If it occurs overflow, then, most likely, the sensor came into disrepair.

In this case, the repair is inexpensive and quite simple - you can replace the sensor with your own hands, turning the dishwasher (the sensor is located below).

Incorrect temperature

Many manufacturers of dishwashers, such as Bosch and Indesit, set to devices temperature mode - from 30 to 90 degrees. If you put a certain temperature, and you have a clearly inappropriate result, then problems with the temperature sensor are possible:

The sensor came out of standing;
Water is supplied to the system under insufficient pressure (during repair work on the water lines);
The heater breakdown occurred.

Repairing such a breakdown is best to entrust the experienced wizard in service center.

There is no drain of water

One of the frequent breakdowns of dishwashers is the lack of drain of water.

Drains of water occurs as follows: through the pump water passes into the hose and an internal filter. Improper operation can lead to contamination of any of these parts. For some reason, such a breakdown of the Bosch dishwasher is most often found. Perhaps this is due to the fact that the market for dishwashers, Bosch is a undoubted leader. It was this manufacturer who won the confidence of buyers, so the dishwasher is this brand stand in most houses.

Eliminate the problem with pollution of the pump will be more difficult than the problem with nozzles, but the essence is the same - it is necessary to remove the pump, the hose and the inner filter and rinse them thoroughly.

Another reason for the poor water drain is too high the location of the plum hose.

Dishwasher Beating Current

This problem is less likely to others, but applies to one of the main. The reason for this behavior of your dishwasher in the following - the electric heating element has not failed, but it has breakage.

Such a problem may arise due to a factory marriage, due to long-term operation, as well as due to increased rigidity of water.

Diagnosis and repair in this case are carried out in the service center. This is especially important if your device has not yet been removed from warranty service.

Other frequent malfunctions

One of the frequent malfunctions of Bosch dishwashers is not taking detergent. Here are two options: nozzles contaminated or broke the opening valve for detergent. In the first case, the problem is eliminated by simple cleaning, and in the second - replacement of the corresponding valve.

If, when opening the dishwasher, there is a complete lack of power, in most cases the main problem is outside the device - a socket or a network filter broke. You can check their performance by any other device. Other reasons for the occurrence of the problem may be damage to the power button or malfunction in the door latch mechanism.

Anyway, the dishwasher is a device that, like many others, can break. The main causes of breakdowns are usually invalid operation or quite a long service life. If you can not independently draw diagnostics and eliminate a malfunction, it is best to entrust this work to professionals, otherwise you can also damage the device.