Lenovo service center. We enter the "Safe Mode" through the BIOS

Experienced PC users are aware of such a Windows option as "Safe Mode". It is necessary in modern operating systems, because the latter are by no means sinless. Mistakes happen, and sometimes they cannot be corrected in working order. With XP and 7 everything was more or less clear. But with version 10, things got a lot more complicated. Standard entrance to safe mode turned off. Now this is not so easy to do. What caused such a decision of the developers - it is not clear. But the fact that the seventh version was much more understandable than the newfangled "tens" is undeniable. However, in the days of XP, they said so. So, most likely, users will get used to this "miracle". So how do you enter safe mode in Windows 10? We'll talk to them about it.

What is "safe mode"?

Safe Mode is a way to boot the system with only the most important drivers. That is, only those components that are necessary for the minimum system performance will be loaded. No additional codecs, flash and other unnecessary nonsense. This mode is used to fix operating system errors, return to an earlier state using system restore. Also, some viruses can only be removed in this way. Therefore, everyone needs to know how to enter Windows 10 safe mode.

Sometimes this state of the OS requires an "account" fix or a local conversion. Naturally, to carry out this procedure, you need access to the Internet. And here the option "Safe Mode with Network Driver Loading" will help. Users of the "dozens" need to choose this option, because it will not work to fix the account without the Internet. And this brings us back to the question of how to enter safe mode.

How to log in if the OS starts up?

There is various options by loading "dozens" in safe mode, if everything works fine. The easiest way is to click on "Shut down" in the "Start" while holding the "Shift" key. Then you will be prompted to select the type of download. It remains only to choose the one you need. Also try to "bring back" the launch of the mode when you press F8. You just need to write the desired text in the command line. How to enter safe mode in Windows 10 via command line? More on this below.

There is one more option. Enter "Options" and further - A lot of unnecessary text will appear with the available options. Among others, there will be items "Restart the computer in safe mode" and "Restart the computer in safe mode with support for network drivers." Choose the one you need this moment, and restart the PC or laptop.

You can also try this procedure. Go to "Start", select "Run", type "msconfig" (without quotes). A dialog will appear with a "Download" tab. Among the fair amount of items there will be "Boot Options" and "Safe Mode" with a bunch of options. This is where it should be ticked. And then just restart your PC.

Using the command line

Go to "Start", select the "Command Prompt" item and enter the text in the commander: "bcdedit / set (default) bootmenupolicy legacy" (without quotes). Then reboot the machine and press F8. The Windows start options window will appear. Here we select "Safe Mode". And whether network drivers will be needed - decide for yourself. This is one of the answers to the question of how to enter safe mode

A variety of problems are usually solved through the commander. But in the "top ten" it is best to use Windows Power Shell - a console borrowed from the Linux OS family. This tool allows you to run commands as an administrator and is much faster than the standard commander. Yes, and it is clearer to those who have ever used Ubuntu or Mint. The command line method works on any Microsoft operating system (except XP). The company from Redmond did something adequate. Honor and praise to her!

What to do if the OS does not start?

There is only one way here. You won't be able to start Windows in Safe Mode. Therefore, you need a flash drive with the "dozens" distribution kit. When loading the installer, you can turn the trick with the commander and force Windows to boot from the HDD in safe mode. You just need to find the inscription "System Restore" in the welcome window of the installer. A commander will appear there, into which we enter the text already familiar to us (without quotes). Now restart your PC or laptop. This is one of the answers to the question of how to enter Windows 10 safe mode through BIOS.

Many people think that if operating system does not want to work, then the easiest way is to reinstall the OS. On the one hand, this is true - a clean system always runs faster. But on the other hand, frequent reinstallations of the operating system are certain death for hard drive. Not to mention a lot of time to kill on full customization systems. This does not include installation time. Therefore, it is easier to solve all problems that can be fixed using safe mode.

ASUS laptops

There are some nuances here. The fact is that ASUS laptops have a kind of entrance to the boot menu (media selection during boot). Before performing actions with the commander in the "dozens" installer, you need to force the laptop to boot from the drive with the distribution kit. To do this, just hold down Tab at startup and select desired type downloads. How to enter safe mode in Windows 10? ASUS - the same PC. That is, the method with the commander from the "dozens" installer also works.

In general, Asus laptop manufacturers have their own concept of convenience and ergonomics. That is why the engineers have moved away from the standard canons and assigned some insane keys for low-level control of the laptop. Therefore, before trying to change the BIOS settings, you need to read the instructions very carefully. Otherwise, your "correct and standard" actions can lead to very sad consequences.

Acer laptops

The most problematic in this regard is the E5-731 laptop. In order to get into the boot menu of this laptop, you need to do whole line operations. First you need to press Enter to get into the BIOS of the laptop. Then move to the "Boot priority" tab and select our flash drive with the "dozens" installer. Now be sure to reboot the device. The laptop will boot from the drive, not from the HDD. How to access Windows 10 Safe Mode in Acer E5-731? Using the commander in the installer. Exactly the same as in the previous examples.

With Asers, everything is somehow incomprehensible. This way to get to drives with distributions was used in ancient times. system blocks with processors from AMD and Why the manufacturers decided to choose this particular method is unknown. But in this situation, after manipulating the commander, you will have to return to the BIOS again and set the start from the HDD as a priority. And this is quite inconvenient.

Lenovo laptops

How to enter safe mode in Windows 10 through the BIOS of laptops from Lenovo? Here is the easiest. It is enough to press the F12 button at the start of the device - and the media selection menu will appear. We select a flash drive and boot. And then we act according to the already known scenario with the command line and the right team. Laptops from Lenovo are the simplest in this regard. The Chinese company clearly knows a lot about ergonomics.

In general, Lenovo laptops are in no way inferior to more famous brands in terms of quality and location of controls. And in the case of Windows 10, they behave more adequately than other models. It even has interesting option with Safe Mode for those using UEFI. It is enough to hold Delete at the start - and launch options will appear. Well, why not charm?

Conclusion

Of course, entering Safe Mode in Windows 7 was much easier. But even in the "top ten" he has not gone anywhere. The developers just made it less accessible. But with the help of certain commands or actions, it is quite possible to boot the operating system in this mode. And after that, you can fix the errors of the drivers, the operating system itself and its components. The main thing is to do everything clearly according to the instructions. Then there will be no problem.

If none of the above methods helped fix system errors, then there are at least two ways. The first is to reinstall the entire operating system. This advice is not devoid of common sense, since the latest Windows always works better and faster. If you do not know how to install, or you do not have free time, then there is only one way out - to bring your laptop or PC to the professionals in the workshop. They will do everything quickly and painlessly. But it will cost money.

How to enter safe mode in Windows 8!?

The safe boot mode of the operating system is a minimal boot option. required amount functions and software.

When logging in in safe mode, the corresponding markings are displayed in the corners of the screen.

This is used to diagnose system problems. The absence of a problem while running in safe mode allows you to exclude essential services from the suspected causes.

Also, a large number of problems can only be fixed from.

To initiate a system startup in this format, there are several possibilities. For this, both a simple keyboard shortcut and a bootable optical / flash drive are used.

Method #1: Keyboard Shortcut During Boot

This option is known to most confident users early versions of the OS that know how to enter safe mode windows 8 while loading.

It consists of a few quick presses of "F8" before the system boots.

In some cases, you will need to use "Shift + F8". As a result, a screen with a list of boot options should appear.

Use the arrow buttons to select the "Safe Mode" item and confirm the selection with the "Enter" key.

In the latest version of the operating system, this option may not be compatible on all PCs.

If it is not possible to use the combination of buttons mentioned above, then the following actions should be taken:

After these manipulations, loading can be done using hot keys.

The described method will help answer such a question as how to enter windows 8 safe mode on an hp laptop.

Method #2: OS Configuration Tool

To call the utility to configure the operating system parameters, you will need to press "Win + R". This action will open the execution bar, in which you need to write "msconfig".

After pressing “Enter” or “OK”, the settings window will appear directly. In it you need to open the "Download" tab.

At the bottom of the window, in the "Boot Options" field, select the "Safe Boot" and "Minimum" items.

After agreeing to all the above settings, you will be prompted to reboot.

It can be confirmed or postponed. This will allow the computer to apply the settings after the first restart of the OS.

Note! The system will always boot in safe mode until the user deselects the boot options. After fixing the problems, it is important not to forget to return the settings back to normal.

Method number 3: Diagnostic tools

If you need to activate the buffer format of a running OS, then it is better to use the following method. To do this, you need the "Options" button, which is on the sidebar.

Then you need to select "Shutdown" and, while holding down the "Shift" button, click on the "Restart" item.

These steps will launch a diagnostic screen. On the "Select action" screen, click on "Diagnostics".

In the "Diagnostics" window, you will need to open the "Advanced Options".

On this screen, you need to select the "Boot Options" item.

Here you will see a list of conditions under which the OS will boot. After reviewing the settings, click the "Restart" button.

In the next step, the diagnostic program will provide several boot options. The selection is made using the F1-F9 keys.

The fourth item is required in the list, that is, you need to press F4.

After these manipulations, the computer will boot in safe mode and it will be possible to perform necessary actions.

Some users think: “how to enter windows 8 safe mode through bios?”.

So this is impossible to do, because the BIOS is not related to the OS.

If you experience a significant computer problem, you may need to log in through Safe Mode. When launched correctly, this function will make it possible to boot a PC with a set of basic drivers - a mouse, monitor, keyboard, video adapter, disks. Standard services are also included to help the system software function. Using this method, as a rule, it is possible to eliminate most of the failures associated with computer work. Find out how to carry out this procedure correctly.

What is Windows Safe Mode

Safe Mode is inherently diagnostic, it helps identify problems with device drivers. If you have problems starting your PC normally, you should try turning it on with a basic set of services. If the device is working normally with such parameters, the essence of the failures should be sought in the recently appeared additional elements. Such a Windows download allows you to remove software that prevents the adequate functioning of a laptop or desktop PC.

If the computer turns on immediately in safe mode, then there is a problem that prevents the operating system from starting. As a rule, this is affected by the programs that you have installed in Lately. To fix the problem, you can use the "system restore" function, which you will find in the "Start" tab, "Control Panel".

How to boot windows 7 in safe mode: instructions

Two methods are used to start in safe mode, they differ fundamentally from one another. In the first variant, the procedure occurs at boot, and installed windows the seven does not start, so you can easily make changes to the devices. In the second case, the inclusion of a basic set of services comes from the OS environment, which imposes some restrictions and will not make it possible to fully carry out repair procedures. However, both of these methods can solve some problems that arise during operation. Read more about them below.

Entering Windows 7 Safe Mode at OS Startup

If you encounter problems in the functioning of your PC, you need to know how to enter windows 7 safe mode. If the device is turned on, click the "Restart" button in the "Start" tab. You need to switch to special mode when the computer is turned off. Before the icon appears, indicating that Windows is starting, you must click the F8 key several times. Try not to miss the moment, otherwise the OS will start and you will have to reboot the device again. A window with the following connection parameters should appear on the screen:

Safe mode. With it, you can launch using a set of standard driver programs. Only those services that are needed to start and run the computer are enabled.
With loading of network drivers. You will need to select this method if you want to use the Internet or connect via local network.
With command line support. The familiar desktop interface will not launch. Selecting this option causes the command line to appear instead.

In addition to the tabs described above, you will see other options. For example, enabling boot logging creates a special file that records all the drivers that are in Autorun. This helps to detect a broken program. Running VGA will help you set the ideal monitor resolution. Selecting Last Known Good Configuration will restore windows to the settings it had during a healthy boot. The remaining options (restoring the directory service, debugging) are intended for IT professionals.

Use the arrow keys to select the tab that best suits your task. After the selection is made, press the Enter button on your keyboard. Then you can enter Windows and figure out the causes of the problems. Using this method, you will be able to restore the system by rolling back to the moment when the device was working fine, remove virus programs, broken drivers, and much more.

Possible problems when turned on:

A window is launched, indicating that Windows is turned on. This can happen if you are too slow or an insufficient amount press F8 once. Repeat the procedure by restarting your computer.
Disabled F1 to F12 buttons. If this happens, you need to know which key turns them on. Hold down the Fn button, and then press F8, and the device will boot.

How to get into safe mode from the OS environment

In some cases, system logon can be performed using a minimum number of services from the operating system environment. This method is able to help in solving many problems, although it is less popular. If failures windows work too serious, the inclusion of the OS may not bring proper results. How to get into the mode you need (safe) using the operating system:

Find the Win key on your keyboard (it may have the Windows icon displayed when you turn it on). Hold it together with the R button.
The command line will appear. Enter the following letters there without quotes "to". Press the "OK" key.
This will bring up the settings window. Among the tabs, open the section called "download".
Select the desired operating system. As a rule, most computers have one OS - in your case, windows 7, which is loaded by default.

Below you will see a section called Boot Options. Select the "Safe Mode" item, check the box next to the "Minimum" value.
Click Apply, then OK.
Next, a small window will appear where you will see two tabs "Reboot" and "Exit without restarting". If you want to restart your computer now, choose the first option. In the second case, the next time you turn on the PC, the device will launch a basic set of programs.

What to do if safe mode does not start on a laptop

On some laptop models, there is a problem that prevents you from turning on the device with minimum set services. Then, when pressing F8 several times, the window in which you can select such a function does not appear, and the operating system starts to start. This may be due to the default key combination, which provides for the simultaneous holding of the Fn + F8 button. If this option does not work, the problem may be related to a broken keyboard.

During normal boot of the operating system, you can enable the minimum set of services required for operation using the command line:

To do this, press "Win + R", enter a combination of letters "msconfig" without quotes. Click OK.
Next, you can go to the tab where you need to select "Download", mark the desired OS.
In the Boot Options section below, look for Safe Mode and select Minimal. Finally, click "Apply", "OK".
Select "Restart" or "Exit without reboot" if you need to start with a minimum set of programs later.

Video: how to enable safe mode on windows 7

If you have never entered safe mode using the operating system, then the first time you may not understand how to do it according to the instructions. Explore below step by step video an experienced PC user who will help you solve this issue and fix the problem that has arisen. The host of the video explains in a few minutes how to enable the basic software set effortlessly. The method is simple, even those people who have never encountered such a problem will cope with it. look step by step video instruction:

Sometimes you need to start your laptop in safe mode on windows 7, windows 8, vista or XP. Differences are only in the eight, the rest are almost the same.

To enable safe mode on samsung (samsung), asus (asus), acer, hp laptops, sony xperia, lenovo, sony vaio, msi or Packard bell, you can use one of the three methods below.

Why three? Anything can happen - suddenly one does not work - try the second. In general, safe mode is the same as usual, only some services / programs on the laptop do not work.

I turn on safe mode on my laptop mainly to disable (remove) antivirus applications and non-removable programs.

The first way to start a laptop in safe mode on windows 7

To download, go, open, call, install, get, translate, select, restart or switch to safe mode, click the restart option and immediately after turning it on (while there is no Windows logo), click the f8 button.

V rare cases you may need to press another key: f1 to f12. Then you have to experiment or go straight to the second method.

Starting Windows in safe mode: the second way

You can start safe mode in Windows (I’m writing about windows 7) through the “control panel”, by clicking “administration”, clicking on “system configuration” and moving to the boot tab, and just check the box in the appropriate place (see picture below).

You can do it differently by using the "msconfig" utility. Paste it into the laptop search (without quotes). It will appear at the very top - click once, and then do as described above.

The third way to enable safe mode on a laptop on win 7

This method is for the lazy - just force shutdown the laptop. For example: remove the battery and disconnect the mains.

It can be easier. Press and hold the power button for a few seconds (until everything goes dark).

Then just turn it on and you will see a menu for 30 seconds in which you can select various ways starting a laptop - the very first one on the list is the one you need.

That's all, I think one of the three options will definitely suit you. good decision tasks.

Category: Uncategorized

Safe Mode in Windows 10 is required for debugging and troubleshooting the operating system and software: problems with drivers, to remove viruses, fix errors, etc. In Safe Mode, only standard programs and drivers necessary for the system to function in safe mode are loaded with the system.

In Windows 7, to enter safe mode, at the very beginning of the system boot, you need to press the "F8" key. On Windows 10, this method does not work. According to Microsoft representatives, starting with the operating Windows systems 8, to speed up the computer boot, the use of the "F8" key was disabled, because this key did not have time to work.

How to enter safe mode in Windows 10? You can start Safe Mode in Windows 10 using other methods. In this article, I will talk about four of the most simple ways, with which you can enter the safe mode of Windows 10 (there are even more complicated ways).

Three methods for booting Windows 10 in safe mode can be used on a healthy operating system, and the fourth method will help when the Windows operating system does not boot at all on the computer.

How to boot into Windows 10 Safe Mode

The first way is to enter Safe Mode using the system tool, which works on Windows 7, Windows 8, Windows 8.1, Windows 10 operating systems.

Press the key combination "Win" + "R" on your keyboard. In the Run window, type: "msconfig" (without quotes) and then click on the "OK" button.

In the System Configuration window, open the Boot tab. At the bottom of the window, activate the "Safe Mode" item. By default, the minimum load is selected. Therefore, if you need network connections in safe mode, check the "Network" item to load network drivers.

After that, the Windows 10 operating system will start in safe mode. Before exiting Safe Mode, enter Computer Configuration as described above to disable Safe Mode.

How to Enable Safe Mode in Windows 10

Second the way is fine for users of operating systems Windows 10, Windows 8.1, Windows 8. A new item "Safe Mode" (or something like that, at your discretion) will be added to the boot menu that opens before starting Windows 10.

Right click on the start menu. In the menu that opens, click on "Command Prompt (Admin)". In the command line interpreter, enter the command:

Bcdedit /copy (current) /d "Safe Mode"

This text must be entered with spaces where they are, quotation marks from the English keyboard layout. After entering the first quotes, switch to the Russian keyboard layout, enter the text: "Safe Mode" (or something similar), then switch to English layout, enter the second quotation marks.

After that, simultaneously press the "Win" + "R" keys on the keyboard. In the "Run" window, enter: "msconfig", click on the "OK" button

In the "System Configuration" window, in the "Boot" tab, you will see that a new entry "Safe Mode" has appeared among the list of operating systems. Here you can choose the minimum safe mode boot, or boot with the network. In the "Timeout" field, you can change the time the boot menu is displayed. By default, the menu will be displayed for 30 seconds, you can choose a different period of time, for example 10-15 seconds.

Before starting the operating system, the "Select an operating system" window will open. This window offers a choice of two options: "Windows 10" and "Safe Mode". Use the arrow keys on your keyboard to highlight "Safe Mode" and then press the "Enter" button.

If you do not select anything in this window, then after a certain period of time, Windows 10 (Windows 8.1, Windows 8) will be launched.

This window will open before every start of the operating system.

To remove the system selection menu, enter System Configuration, highlight Safe Mode, and then click the Remove button. After the reboot, Windows 10 will be loaded immediately.

Booting Windows 10 in Safe Mode

The third way is to boot into safe mode using a special boot option. Press and hold the "Shift" key on the keyboard, enter the "Start" menu, click on the "Shutdown" button, and then in the context menu that opens, click on the "Restart" item.

This will open the Choose an Action window in the Windows Recovery Environment (Windows RE). Click on "Troubleshooting".

In the Advanced Options window, select Boot Options.

In the Boot Options window, click the Restart button.

In the next window, you will need to select one of the following Safe Mode options:

Enable Safe Mode (F4).
Enable safe mode with network driver loading (F5).
Enable safe mode with command line support (F6).

To select boot options, use the number keys, or function keys"F4", "F5", "F6".

After selecting the appropriate mode, the Windows 10 operating system will start in safe mode.

Entering Windows 10 Safe Mode if the system does not boot

The previous methods work with a working operating system: Windows 10 boots first, and then you enter Safe Mode. If the operating system does not boot at all, then you can enable safe mode in Windows 10 using a bootable USB flash drive, or an installation DVD with an image of the operating system.

Boot your computer from a bootable USB flash drive, or from a DVD. After that it will start Windows installation"(Don't worry, we won't install the system).

Next, the "Select Action" window will open (see image #6 for the previous method above, the images are identical for both methods). Next, in the "Diagnostics" window (image No. 7), click on "Advanced options". In the "Advanced Options" window (image #8), select "Command Prompt".

In the next window you will be prompted to enter a password from account. If your computer is logged in without entering a password, do not enter anything. Next, click on the "Continue" button.

A command line interpreter window will open. Enter the following command at the command line:

bcdedit /set (globalsettings) advancedoptions true

After entering the command, press the "Enter" key. Close the command prompt window when the operation is complete.

In the Select Action window, click Continue.

After restarting your computer, you will see the Boot Options window (see image #10 above for the previous method). Here, using the keyboard keys, you need to select the appropriate item to boot the system in safe mode: "Enable safe mode", "Enable safe mode with network driver loading", "Enable safe mode with command line support".

With each new Windows boot, you will see the Boot Options window. For a normal system boot, you need to press the "Enter" key (Enter).

In order to remove the "System Settings" window every time you boot Windows, you must boot again from a bootable USB flash drive or DVD, and then select "System Restore" in the "Install Windows" window. Alternatively, press and hold the Shift key, enter the Start menu, click the Power button, and then click Restart.

bcdedit /deletevalue (globalsettings)advancedoptions

Close Command Prompt, and then turn off your computer. Now after starting Windows, you will no longer see the "Startup Options" window.

Article Conclusions

Windows 10 Safe Mode can be entered using the system tool. After adding an additional item to the boot menu, you can choose to boot into safe mode when you start Windows 10. Using the special boot methods in the Windows RE recovery environment, you can start various options for Windows 10 safe mode. Using a bootable USB flash drive or installation DVD, you can boot Windows 10 in safe mode when the system does not boot.