How to make a coffee table with your own hands? DIY coffee table - a creative design for decorating your home interior DIY coffee table from a chair.

Do you love designer items, but sigh in frustration when you look at the price tags that adorn them in stores? Try becoming a designer yourself. Do you think it's difficult? Nothing like this! By following the instructions, you can easily create with your own hands original a piece of interior from scrap materials. And we suggest starting with coffee table- such a simple, but very important subject furniture. Believe me, at such a table you will be happy to serve tea to your guests, who will admire your skills. In addition, by creating Coffee table ik with your own hands, you will literally fill your house warmth and put a piece of your soul into it. So it's definitely worth a try.

DIY coffee table in a marine style

Idea in the style of "romantic". All year round, while sipping your favorite drink at this table, you will remember the warm sea, gentle surf and lunar path. « Nautical"The table is tenderness, sophistication and originality in the very heart of your home.

How to do it?

1. Take the old window frame and clean it of dust and dirt. If the previous glass cracked, insert a new one, then get rid of the old layer paints and sand the surface. Next, you should remove the metal corners, which additionally secure the parts. frames.

Ready! Enjoy your creation and bring joy to your guests!

Suitcase table for travel lovers

Very original solution for an old favorite suitcase that has seen other lands with you and that you don’t want to throw away because of the memories.

How to do it?

First, go to the store where you will need to purchase furniture legs ( wooden or metal). If you want to make a mobile table, then you need to take wheels. You will also need plywood, screws and a screwdriver.

Now we make markings on the bottom of the suitcase for future legs and drill holes. Since it will not be possible to attach the legs to the fabric, we put plywood inside the suitcase, make markings on it through the holes and also drill them. Now we attach the mount to the bottom of the suitcase and attach the legs. Using hot glue, glue the felt inside the suitcase.

To give the table an original appearance, reminiscent of distant travels, you can decorate it with stickers made in the form of stamps, or decorate it at your discretion.

That's all - the unusual coffee table is ready! By the way, there are a huge number of options for turning suitcases into tables: by choosing the legs to your liking, you can make a table into style retro or classical. You don’t have to attach the legs at all if you have a massive suitcase - it will look truly incredible: such a table will bring into the interior a sense of adventure and adventure, the spirit of travel and unknown distant countries.

Table made of logs for nature lovers

Let's take it wooden beams(in this case birch) of the same height and width, 32 pieces in total. You also need to take a base for the table, legs (4 pieces), putty to match the wood, a screwdriver and glue intended for wooden surfaces.

First you need to assemble the base for the table, then glue wooden beams around the perimeter, and sew up the middle with cardboard. Then we screw the legs to the bottom. Next, we glue thin wooden dies to the inner surface - this will make it seem like the table is completely wooden. Now we take the putty and carefully fill in all the voids, after which we rub it in until we create a completely flat surface. Voila! Now you are the owner of an extraordinary table that will become the highlight of your interior.

If you like the idea, you can create other tables using this scheme, using, for example, branches instead of bars. To create such a table you need to take a plywood box, painted black paint, the size of which is 40x40x60 cm (or any other size at your discretion).

To paste the frame, we take branches from which we first remove the loose bark (we do this with sandpaper). What is the order of gluing: first we glue the branches on the long side of the table, and then we select wooden dies and, as mosaic, lay them out on the ends. The thickness of the dies should be approximately 1 cm; they can be cut into parquet or circular saw. And finally, install the glass that will serve as the tabletop. If desired, you can make it mobile by screwing the wheel supports to the table.

Using the same technology, you can create many more unusual pieces of furniture. You can lay out the branches horizontally and then you will get such a wonderful table. Such furniture looks not only very original, but also incredibly stylish.

Original table made from pallets

An idea that came to the mind of someone truly brilliant. It would seem that one can come up with pallets, which are probably lying around at every dacha? And you can make them into a very convenient and functional element of the interior.

How to do it?

First, collect all the tools necessary for your idea: the pallet itself, drill, clamps, hammer, screws, nail puller, wood glue, wheels, soap, primer, screwdriver. In addition, take paint brushes, a flap brush with abrasive bristles for a drill, varnish and a clear primer.

First of all, you should take a drill with an attachment designed for wood processing, and clean the surface of the boards from dirt. Now carefully disassemble the sanded pallet into pieces. Lightly tap out the rusty nails with a large hammer and carefully pull them out with a nail puller. Glue the broken pieces of boards with wood glue. At this stage you will need clamps. They need to carefully clamp the boards and wait until they dry.

Now the parts prepared for the tabletop need to be nailed and glued with reverse side, then clamp them with clamps and wait until they dry.

Then coat the table with a colorless primer, and then varnish. Next, on the back of the table, mark places for screws to attach the wheels. Drill holes for the fasteners with a drill. To ensure that the screws fit into the wood easily, lubricate them with soap. Using a ratchet wrench, you can quickly and conveniently tighten hex head screws.

A stylish, compact and quite functional table is ready!

Table made of drawers

Another one original idea captivates with its simplicity and unexpectedness - who would even think of building a table from boxes? But it has come, and now you yourself can create such an unusual piece of furniture at home. Surely you yourself will be delighted, and your guests will appreciate the originality of this idea.

How to do it?

Take 4 wooden boxes, sandpaper, water-based varnish, roller and brush, dowels, 10 mm plywood sheet, PVA glue, 4 wheels and self-tapping screws.

First you need to sand the drawers and coat them with varnish. Then, using a drill with a stop, make holes at the ends of the drawers. Using wood glue, you need to fix the dowels at the fastening points and connect the ends of the boxes together. Attach wheels to a sheet of plywood, and then attach the sheet to the boxes with self-tapping screws. The table is ready!

Such extraordinary things can be created from quite ordinary materials. Having imagination and a desire for originality and comfort in your home, you can easily create miracles. Look around: maybe an old window frame has every chance of turning into an interesting interior element?

Or maybe a huge wooden reel of industrial cable that can become an elegant piece of furniture?

Coffee table was an integral attribute of Soviet kits upholstered furniture. According to the plan, such a set necessarily included a sofa, a couple of armchairs and, in fact, a table. The times of the Union of the Indestructible have long since sunk into oblivion, but the coffee table is still in demand. Of course, it can be used not only for storing magazines and other periodicals, but also, for example, for serving a romantic dinner, for handicrafts and other necessary little things. He will successfully play the role bedside table or stands for pots or vases of flowers. In general, this piece of furniture will be needed both in the living room and in the bedroom. Modern furniture stores are ready to offer many options for such tables, but real craftsmen can create their own exclusive version. This is also a way to save money, and sometimes an opportunity to extend the life of some things if you make it from scrap materials. In this article we will look at how to make a coffee table with your own hands and what you will need for this.

The simplest and most common material for making this interior element is, of course, wood. In addition, wood is perhaps the most affordable and easy-to-work material. With the help of the tools that every self-respecting man has in his arsenal, any board can become a coffee table.

Wooden coffee table - an imperishable classic

In order to make such a table-bench with your own hands you will need following materials(all dimensions are in cm) and tools:

boards 2.5×7.5 (3 pcs.);
boards 2.5×10 (1 pc.);
boards 2.5x5 (8 pcs.);
legs of the required length (4 pcs.), fastenings for them;
screws - 3.5;
self-tapping screws - 3;
finishing nails - 3.75;
glue for carpentry;
putty, paint, primer;
sandpaper;
saw;
drill;
a pair of short and long clamps;
roulette;
hammer;
Kreg Jig for hidden holes;
sander

Everything is prepared, then let's start manufacturing:

The ends of two 2.5×7.5 boards sawn along the length of the table must be cut at an angle of 45º. And cut 2.5x5 boards with a length equal to the length of the previous boards along the internal cut.

Place the pieces, aligning their edges, and measure the width of the table. Next, you need to cut two parts equal to the required width from a 2.5×10 board. Secure with self-tapping screws to each board.

Make hidden holes at the ends of the crossbars. Later they will help to fasten the products with the sides.
Use wood clamps to secure the side boards, aligning the ends, and attach with screws into the drilled countersunk holes.

The following parts - cut out the end boards 2.5x7.5 carefully, you may need to adjust the blanks, so make them a little longer, and then gradually grind off the excess. Glue the finished ends using wood glue and secure with a belt until dry.

Thoroughly sand the surface of the finished product. If necessary, apply putty to the joints of the boards, let it dry and sand again.
Apply paint or stain and varnish (whatever you prefer).

Screw on the leg mounts and screw in the legs themselves.

A handmade wooden coffee table is ready to delight you with its versatility. It can be used both as a table and as a bench.

Wooden coffee tables can be round. Let's figure out how to make such a round coffee table with your own hands. To make it you will definitely need:

boards;
screws;
wood glue;
protective agent for wooden products;
paint, stain, varnish;
drill;
jigsaw;
level;
roulette;
Miter saw;
clamp clamps.

You can make a drawing for a coffee table yourself, there is nothing complicated about it. When the diagram with the dimensions you need is ready, you can start working.

Action plan:

First, make a support. Here you need to act as your imagination and level of skill suggest. It should look something like the picture. To hold the support parts together, it is best to drill hidden holes using a Kreg Jig, secure with screws, and cover the holes with plugs.

The support must be sanded and then treated protective agent and paint or stain.
To make the top of such a coffee table with your own hands, the boards should be cut into parts equal to its diameter. Lay out, leveling the edges and surface (you can’t do without a level here). Glue with glue and secure the structure with clamps until completely dry.

From the resulting square blank, using a special curved cutting machine, you can cut a perfectly round tabletop. A simple carpenter is unlikely to have such equipment; a company specializing in furniture manufacturing can help here. If you decide to do this operation yourself, you will have to try. To begin, mark a circle of the required diameter on the workpiece. Then secure the circular cut guide with a nail in the center of the marked circle and make the cut.
The tabletop, like the base, should be carefully sanded, especially its edge, then treated with an antiseptic and painted (varnished).

If you wish, you can use stencils to apply a design, for example a dial, as in the photo, or maybe something else. It all depends on your imagination. This homemade table will decorate any interior, even the most sophisticated one.

Coffee table made from pallets

Construction pallets are very versatile construction material. If you wish, you can use them to make many useful, comfortable, and most importantly, exclusive pieces of furniture.

DIY coffee table made from pallets - simply quickly unforgettable

If you have already had thoughts about how to make a coffee table from construction pallets with your own hands, we will help you to realize them. To do this, we need the pallets themselves and the usual set of tools and materials for working with wooden products, namely:

hacksaw or jigsaw;
sanding machine or sandpaper;
drill;
screws;
wood antiseptic;
paint, stain, varnish (at your discretion).

Operating procedure:

To make a table from pallets, first select suitable material. Select pallets carefully. The boards should not have large knots, as well as mold and signs of destruction. It is best to disassemble the pallet into planks before starting work. Clean each of them, then saw off the necessary part, sand it and coat it with an antiseptic. You can paint it right away, it will be much more convenient, because once assembled it will be impossible to get into some places. Then tighten with screws necessary design and finally varnish.

It is best to make such a table on wheels. For this you can use furniture wheels, and better wheels for trolleys. The latter are more reliable, and their appearance is more suitable.
Another option is to make small legs for such a table from small bars, and the surface of the table can be covered with durable glass of the required size.

Your DIY pallet table is ready. As it turns out, you can create an exceptional thing by spending very little time, and most importantly, money. But construction pallets not the only available material from which you can make a small coffee table. For example, standard wooden boxes will cope well with this task.

This handmade coffee table will serve you faithfully for a long time, if you approach the issue of its creation seriously, despite all its apparent simplicity.
It would be advisable to make a table from a log or a picturesque stump, for example. It will decorate the interior in country style. It can be on wheels and have a tabletop unusual shape made of durable glass.

Folding coffee table, how to make

We all want to save more free space in our apartment. An abundance of furniture cluttering everything free place, has not been welcomed for a long time. However, having little furniture is also not the ultimate dream. There is only one way out - interior items that easily perform several functions. This is what a transformer table is. When folded it small size and plays the role of a cabinet or coffee table, and when disassembled it is a full-fledged dinner table, which will help you host guests or arrange a family dinner. How to make such a transformer with your own hands?

Computer programs will help you create drawings of such a table. With their help, you can calculate all the nuances.

The best material for creating a transformer is laminated chipboard.

Take a responsible approach to purchasing the necessary accessories. The durability of the mechanism, and, consequently, the table as a whole depends on it. Mechanisms for folding tables can be purchased in the store.

Thus, when unfolded, this table is very stable and can easily become a dining table.

100 examples of coffee tables

Now you know that you can easily make a small coffee table yourself. At your request, it will be foldable or non-collapsible, on legs or on wheels, in the color of wood or painted. Imagine, try, and your interior will be unforgettable for little money.

Coffee tables are as relevant today as they were many years ago; they can be purchased separately from an upholstered set or as a set, however, like all other pieces of furniture, this one has a high cost, despite its small size. That is why you can make it yourself.

Coffee tables have relatively high prices in furniture stores, however, unlike other pieces of furniture, they are quite easy to make yourself.

Preparatory work

In order to make a wooden table yourself, you need to stock up on the following tools and materials:

solid pine;
varnish on water based;
white spirit;
acrylic paint;
brush;
self-tapping screws;
electric jigsaw;
screwdriver;
radial sander;
milling cutter;
drill.

As for solid pine, you need to purchase material whose thickness is 25 mm. The dimensions of the workpiece for this table are 1500x500 mm. This model does not require separate legs. In order to cover the table, you will need 300 g of water-based varnish. Acrylic paint must be purchased with a shine, which will give the product a tone; about 100 g of this product will be spent. To apply the composition, you need to purchase a brush or take one that is available, you should only take into account that it will have to be disposed of after the work, so how it will be impossible to get rid of glitter.

Tools for making a coffee table.

The coffee table should be assembled using self-tapping screws of two sizes: 4x60 and 4x40 mm. To be used for wood processing electric jigsaw, which comes with a set of files designed for clean cutting of wood. It is preferable to use a self-clamping chuck; it is more convenient for the master when carrying out work. In any case, it should be possible to install a drill with a diameter of 10 mm in the chuck. The radial grinder can be replaced with a regular screwdriver, which has an appropriate attachment.

Related article: Selecting the color of an interior door

From hand router You can also refuse in favor of a traditional plane, since not every craftsman has the first version of the tool. It will be necessary to remove more impressive chamfers.

Drills should have the following sizes: 10 and 5 mm, the first option should be used instead of a separate countersink. A set of bits with an extension cord will also come in handy.

When cutting the material, you don’t have to try to calculate the size of the radius; for this you can use a traditional steel hula hoop as a template.

Preparing for the assembly process

When making a coffee table, you have to perform two stages of product processing: preliminary and finishing. The first stage includes cutting, beveling and sanding.

You need to remove the chamfer by approximately 5 mm; it looks aesthetically pleasing and will not “eat up” the thickness of the countertop externally. Even before covering the elements with tone, sanding should be done in three approaches in the area of the ends.

Drawing of a coffee table.

Such work must be carried out using the technology below.

After you have sanded the sections, you should cover them with a layer of varnish.

You must be prepared for the wood structure to become brittle under the coating. After drying, sanding and varnishing should be done again, this should be done until a smooth cut can be achieved. In this case, care must be taken not to damage the plane.

Wooden table installation technology

When making a coffee table, before you start gluing the elements together, you need to prime the joints with PVA, which can be replaced with wood glue, then the surface should be left to dry. The planks with legs must be mated with self-tapping screws with dimensions 4x40, while when fastening to the tabletop, fasteners with dimensions 4x60 should be used.

The coffee table should not have a resinous surface; in order to get rid of it, you should use white spirit and a large number of rags. It is advisable to carry out such work on open space. Otherwise, the smell will remain in the apartment for a long time.

Related article: Electrical wiring in a wooden house

The varnish must be mixed with shiny paint and covered the surface of the table. You can experiment a little with the remaining acrylic by drawing patterns under the final layer of varnish; they will not be very noticeable and intrusive, you can only see them in reflected light.

Wooden coffee table with legs

Coffee table assembly diagram.

The coffee table can be made by analogy with the one described above, however, it can also have legs in its design. To do this, you will need to use a workpiece from an array of the required size. It is necessary to saw off material from the element on four sides (not two). The size of the tabletop of such a table can be 950x650 mm. The array in this case should have a thickness in the range of 35-40 mm. The blank for this table will be a material with dimensions of 1280x980 mm. The legs can be ready-made balusters, which can be purchased from the construction department; their top should be square, the side of which can be limited to 60 mm. The blanks for the legs can be sawed off so that the table is of the required height.

If you saw off the table top radially from 4 sides, then instead of the elements that in the first case served as legs, you will be able to get a finished table base in four parts. To fasten them, they must be tightened with confirmats with dimensions of 5x90 mm. In this case, the blanks should form the shape of a rectangle, which should be screwed to the tabletop using corners. Do not forget that the elements of the “box” part must be sawn off to length; this will allow you to obtain a structure of the correct shape after assembling the table.

When installing the legs, you should use self-tapping screws, mounting them from the inside. The reliability of the base box will be achieved by the fact that the structure of the wood on the long elements is horizontal.

This way the model will have legs. If desired, such a table can be turned into a dining table at the installation stage; to do this, it will be necessary to cut the legs, leaving a more impressive length. When making cuts using a jigsaw, you can make curly movements.

Making furniture with your own hands is not only a great way to save money, but also an opportunity to put your creative potential into practice!

We will talk about making coffee tables with your own hands. There is no such thing as too many side tables. They can be placed next to the sofa to place a vase of flowers or a mug of tea, used as a bedside table or as a stand for potted indoor plants. However, monotonous wooden tables are unlikely to liven up a dull interior. I want something stylish and unexpected...

Stylish table made of wooden slats with your own hands

This bench can serve as a coffee table, extra seating or storage space indoor plants. This piece of furniture will “fit” well into almost any interior!

DIY coffee table photo

Materials:

Tools:

Step one: Using a hacksaw, cut the ends of two 2.5 x 7.5 cm boards at a 45 degree angle. Cut out fragments from 2.5x5 cm bars, the length of which will correspond to the internal length of 2.5x7.5 cm blanks.

how to make a coffee table with your own hands. Photo

Step two: Place 2.5x5 cm of the workpiece in the middle, and 2.5x7.5 cm on the edges. Make sure the ends of the inner slats are aligned.

Step three: Measure the distance between the outermost 2.5x7.5 cm bars and cut two pieces of this length from 2.5x10 cm boards. They will serve as lower supports for the bench. Secure them by screwing self-tapping screws into each longitudinal rail.

Step four: Using a Kreg Jig, drill two pocket holes at each end of the support crossbars. These holes will be used to connect to the 2.5 x 7.5 cm edge bars.

Tip: It is difficult to give specific recommendations regarding how far from the edge to attach a Kreg Jig. This depends on the length of the screws used, the exact thickness of the board, etc. We advise you to first practice on unnecessary scraps of boards.

unusual coffee table with your own hands. Photo

Step five: Place 2.5x7.5 cm blanks along the edges of the structure. After making sure that their ends are at the same level, secure them with clamps.

Tip: If you use soft wood (for example, pine) to make the table, place unnecessary scraps of boards under the clamp supports. Otherwise, marks from the clamps will remain on the wood.

Step six: Securely attach the outer 2.5x7.5 cm bars to the base of the bench by screwing 3.5 cm screws into the countersunk holes that you made a little earlier at the ends of the support crossbars.

coffee table made of wood. Master Class

Step seven: Measure the width of the fabricated base to determine how long you need to cut the 2.5 x 7.5 cm blank for the ends of the bench. We recommend that you make a cut with a small margin in length, and then slowly grind off the excess until you achieve the perfect fit.

Step eight: Wet the ends of all slats with water and apply a small amount of Gorilla Glue.

Step nine: Place the end boards in their intended place and secure the entire structure with a belt so that it does not fall apart while the glue is wet. For reliability, you can additionally secure the ends with several finishing nails.

Step ten: Sand the surface of the bench sandpaper 120 grit to eliminate all unevenness at the joints. Fill all gaps in the seams and recesses from nail heads (the latter must be recessed into the wood) with putty. Once the putty is dry, sand the surface again, this time with 220 grit sandpaper.

Step eleven: Paint the bench. We recommend that you sand the surface again using 400 grit sandpaper and water before painting.

Step twelve: Install special mounting plates on the lower support crossbars to secure the legs. When attaching them, make sure that you drill holes in places where there are no screws already screwed in. The distance from the fastening to the edge of the base of the bench should be about 2.5 cm. Screw the legs themselves into the fastenings.

Coffee table made of copper pipes. Master Class

The material for making the next table can perhaps be called the most unexpected. This time we decided to tell you how to make a table with your own hands from... copper pipes OK.

Materials and tools:

The figure below shows all the parts (pipes (A-E) and various connecting elements (F-H)) with their sizes and quantities. All that remains for you is to take it in your hands pipe cutter and sit in front of the TV, which will brighten up the tedious cutting process a little. It's not difficult, just a little boring. 😉

When all the pieces are ready, you can begin assembling the lower part of the table. How to do this is shown in the figure.

Having assembled the lower tier, you can proceed to the upper one. The only parts not listed in the parts list are the four 2.5cm pieces of pipe that fit into the tees at the top. corner posts. Without these inserts you will not be able to put on decorative caps, because... the latter have the same diameter as the tees.

Reliable connection of the tubes with each other will ensure glue, but we recommend applying it only after preliminary assembly of the structure, i.e. after you make sure that all the cut tubes are the correct length and fit together well.

Wooden shelves, which you can pre-paint if you wish, are secured using special clamps that are placed on the underside of each board. Now you're ready to decorate your home with a new, handmade table!

DIY lightweight cement table

Concrete countertops and other interior elements in Lately are becoming more and more popular. However, for all their attractiveness, they are not without a number of disadvantages. Firstly, pouring large quantities of concrete can sometimes be quite an expensive undertaking. Secondly, if we're talking about about small side tables, another one comes to light serious problem- such furniture turns out to be too heavy. On the one hand, there is a desire to get a good, solid thing, on the other hand, you want to be able to move a table you made with your own hands without the help of professional movers. The solution found can be considered an insight.

Materials and tools:

Step one: Mark and cut out the foam sheet. From a 120x240 cm piece you can cut 18 squares of 40x40 cm. By stacking them on top of each other, you will get a parallelepiped 40x40x45 cm.

DIY foam table. Photo

Step two: Glue the cut pieces together. 3M Super 77 aerosol adhesive is ideal for this. It is better to perform this stage of work outdoors. Don't forget to wear gloves and a long sleeve shirt. Apply an even layer of glue to one side of the first square, then do the same with the second. Wait ~15 seconds, then connect the squares, making sure their edges meet. Repeat this until all the square pieces are joined into one piece. Wait about 30 minutes before moving on to step 3.

Step three: Now the most interesting thing... giving the resulting parallelepiped the outline of the future table. We decided to make a table in the shape of a cylinder. You can come up with something more original or, on the contrary, keep the original block with right angles. Cutting foam is easy and fun. Your design will have a rough, angular appearance at first, but don't worry! After the table is given required form, it's time for sanding. Using 36 grit sandpaper will quickly smooth out any rough edges. As you get closer to the ideal, gradually move on to sandpaper with a finer grain size. Do not strive to achieve a super smooth surface; at this stage it is important for you to achieve only the required shape.

Step four: The surface of the future table has been sanded, it’s time to cement it. The first layer, applied over the entire foam mold, will fill in the voids and texture of the foam. You only have ~20 minutes, so work quickly so you have time to smooth out any rough edges. Once the applied cement mortar has dried, you can apply the next layer. The number of coats depends on how smooth and even the final surface you want (usually four to five coats are required). It should be remembered that the smoother the surface of the final layer before it dries, the less sanding it will have to do!

Tip: When cooking cement mortar follow the manufacturer's instructions. You should not prepare more mortar than you need to apply one layer (for example, we used 220 ml of water and 450 g of cement). Make sure you don't forget to cover the surface of your workbench or workshop floor, because this job is quite dirty.

Step five: After the last cement layer has dried, you can sand the surface if desired. We wanted to achieve a glossy finish on at least the top of the table, so we sanded it using varying grit sandpaper ranging from 100 to 2000 grit.

Tip: If you are planning this operation, purchase a protective mask that will help you protect your lungs from cement dust

(The table made in this project turned out to be very durable and strong, but at the same time it weighed no more than a kilogram.)

DIY stump table

The material for the next table is sometimes literally lying under your feet. Even residents of megacities will be able to find a suitable stump if they wish.

log table. Photo

Materials and tools:

wooden block;
white acrylic paint;
hand grinder;
chisel;
hammer;
decorative upholstery nails;
molar tape.

Step one: Find a table base! This should not be an old rotten stump, but a freshly cut log. Allow it to dry for at least 6 months (nothing is worse than waiting, but it must be done) until the bark begins to separate from the trunk.

Step two: Using a chisel, use a downward motion to carefully scrape away the bark from the log. If the stump is dry enough, you won't have to use too much force to do this.

Step three: By using grinder with medium-grit sandpaper, sand the surface, removing any remaining bark and smoothing sharp corners. Don't forget to sand the surfaces of the lower and upper cuts. Wipe the wood with a damp cloth.

Step four: It's time for painting. We used white semi-gloss paint that included a primer (we needed three coats for full coverage). You can choose a different type and color of paint, focusing solely on your taste. Don't forget to prime the surface of the wood first. Make sure you don't forget to trim the bottom cut.

Step five: Prepare decorative nails. Place a strip of masking tape along the top edge of the side surface of the block, thereby marking the place where the first row of nails will be located.

Step six: Use a hammer to hammer in the first row of decorative nails. To ensure that the distance from them to the top edge is the same throughout the entire “line” of nails, use the strip of masking tape you previously glued as a guide. Once the first row is completed, repeat with the second and third row of nails (we needed almost 150 nails for three rows).

Tip: Cover the bottom surface of the stump with furniture felt so that you can move the table around the room without damaging the flooring.

The work is done. You can enjoy your new piece of furniture and be proud that you made this charming coffee table yourself.

Coffee tables: do it yourself

Wooden table: how to make?

Many people are interested in how to make a wooden table with their own hands to get a model with an original appearance. Let's consider one of the options.

To make an original coffee table with your own hands, you should take timber with a section of 5x10cm. It is cut into pieces of the following lengths: 130cm - 9 pieces, 21cm - 12 pieces, 34cm - 2 pieces.

The prepared timber is placed in three rows, leaving space for attaching the legs.

The top two rows are removed. The timber in the third row is moved slightly to create an interesting appearance. Next, mark the places for attaching the transverse parts.

Lay the outer bars of the second row and mark the places of cuts. Then the cuts are made circular saw or a hacksaw with a chisel.

The bars of the second row are secured with screws.

Lay the third row, move the parts and secure them.

An empty space is formed under the tabletop, in which they fix legs.

The wood is processed protective composition , preserving the wood texture.

Original model of a wooden coffee table with your own hands

First, to make a table with your own hands, prepare planks: 6pcs - 22.5x45cm, 2pcs - 22.5x41cm, 8pcs - 20x4cm, 8pcs - 40x4cm.

Planks 20x4 and 40x4 are glued in pairs. To ensure they stick together securely, they are clampedclamps.

While the leg blanks are drying, assemble box from the remaining parts. They are connected with wood glue and nailer.

Legs They are attached to the box with countersunk screws. Crossbars are placed between the legs at the bottom.

cover for a wooden table they are also made using 22.5x45cm planks. They are glued together, and then the resulting square is sawn into two triangles.

One triangle is secured with screws, and the second triangle is secured with slats so that it is removable.

All parts are sanded and painted.

Stylish coffee table. Master Class

Start making a stylish table with your own hands by marking the sheet Chipboard 16mm thick. The center is found on the sheet at the intersection of two diagonals.

A nail is driven into the center, to which a thin rope or harsh thread is tied.

A pencil is tied to the free end. This allows you to draw a circle.

If you want to make a table with your own hands that is not round, but more interesting shape, then the shape of the circle is changed by drawing bends.

The table top is cut out jigsaw or a reciprocating saw.

Edges are processed sandpaper.

Legs secured with screws. If they are located obliquely, then the slope should be outward.

Table surface paint in the desired color.

Simple coffee table

To make a coffee table with your own hands, take boards 40x15cm - 2 pieces and 50x19cm - 2 pieces. In addition, you will need legs and mounting plates.

A larger one is fixed on one of the boards plates for attaching legs. You should step back a little from the edges.

The sides and top of the table are secured with wood glue.

It dries in about half an hour.

DIY log table

A self-made coffee table with this appearance will decorate your cottage or country house. Work begins by assembling the frame. To do this, take sheets plywood two centimeters thick. A base with dimensions of 60x80cm is cut out of them. A box 68cm long, 45cm wide and 40cm high is attached to the base.

DIY log table. Photo

After this, thirty round pieces are cut logs 45 cm long and twenty-four round cuts, the thickness of which is 3 cm.

The prepared logs are secured around the perimeter of the box. Fixed from below to the base rollers. They are installed at a distance of three centimeters from the edge.

In addition to glue, it would be useful to secure the logs with screws from below.

Installed on the box plywood cover. Round circles are glued onto it. The space between them is filled with wood putty, which does not shrink when dried. Apply it in stages so that the previous layer has time to dry.

After the putty has dried, the surface polished. For this, a surface grinder is used. After this, the log table can be used.

Country style table

If you are interested in how to make a table from wood cuts with your own hands, then you should read the instructions.

They begin making such a coffee table with their own hands by choosing the appropriate material.

Selected slept We inspect for any interesting parts or parts that need to be removed.

Excessively rough, protruding parts are cut off. On the side where the tabletop will be, the surface level.

Used for work cleaver, which moves at an angle of forty-five degrees.

The sides also need to be leveled.

All surfaces polished, using ever-decreasing grain sizes.

Glossy varnish mixed with resin in equal parts.

The resulting composition is applied to the wood in a thick layer. It will take a long time to dry. If cracks appear during the drying process, they must be filled.

Bottom side clearing out. If there are voids in the tree, they are filled with resin gradually until the hole is filled.

If there are air bubbles in the dried resin, the surface is heated with a heat gun or burner.

A second layer of resin is applied and again left to dry for two days. The entire surface of the tabletop should be glossy.

The part of the ax handles is cut off at an angle of 22 degrees. The surface is sanded and painted in the desired color.

Mark places for legs and make holes.

Glue is poured into the holes and the legs are installed. Special pads are attached to each.

White coffee table

Make such a coffee table with your own hands from plywood And glass First, prepare a drawing and determine the dimensions. Then they proceed directly to production.

DIY coffee table. Blueprints

Plywood acts as a tabletop box with partitions, covered with glass on top. Triangular legs are attached to it.

You can make a door at the box to access what's inside, or you can lift the glass.

LegsFor a table with your own hands, it is better to cut it out of fairly thick plywood. It must be remembered that double legs are easier to make than large quantity single.

When all the parts are ready, they are assembled together and fastened. The table is painted or varnished.

DIY table made from pallets

If you know how to make a table from pallets with your own hands, you can get interesting option furniture for home. Pallets must first be sanded, sawn into pieces and primed.

table made from pallets. Instructions

A table is assembled from the prepared material. To do this, attach legs or wheels. A pallet directly or a surface assembled from individual planks can be used as a table cover.

After all the parts are connected, the structure needs to be painted or varnished. After this, the table made from pallets is ready.

Second version of a table made from pallets

To make such a table with your own hands, you will need one or two pallets. You should first draw a sketch of the future product, taking into account all dimensions.

The table will have a shelf for small things under the table top. The structure is assembled from prepared parts.

The surface is painted black, but this is not the only possible variant. There are many other decorating possibilities.

Coffee table stand

Option on how to make a table from copper pipes with your own hands, may be of interest to many craftsmen.

The pipes are first marked and cut. Then they are coated epoxy glue and assemble the base for the table.

This base is applied to the board and the fastening points are outlined. In these places you will need to drill holes by pipe diameter.

Four holes are drilled, but not all the way through.

The board is impregnated polyurethane and cover stain.

The remaining one is collected from the pipes frame.

Legs and base cover paint in the color of the tabletop.

Made from a piece of cloth pocket, which is hung on the transverse parts of the legs.

All parts are assembled together, adding epoxy glue for reliability.

DIY marine style table

This table is from an old one window frame looks very romantic. The frame is cleaned of dust. If necessary, replace the glass.

Wooden surface paint white acrylic paint. After drying, the paint layer is sanded so that the wood appears. An option is also available in blue and white.

To make the legs, take stalk and sawed into pieces of 34 cm. After this, it is treated with sandpaper to remove roughness.

The blanks are drilled in four places. Next, each leg is attached to the base, and the base with legs is attached to the frame. All this is done with self-tapping screws.

The legs are covered with coarse rope.

For peeled and low-fat glass glue sea souvenirs and seafood. They must be covered with glass on top, which is cut in the workshop to the size of the frame.

A loop is made at one end of the rope. The rope is glued around the perimeter of the frame, leaving the loop free. When the other end reaches it, an interesting sea knot is tied.

Many things can be done with your own hands. This is difficult in most cases, only at first glance. The new review collected examples of unique and amazing coffee tables that craftsmen made with our own hands.

1. Old suitcase

Old suitcases are real finds for designers and out-of-the-box thinkers. Through simple manipulations, suitcases are transformed into unique furniture and decorative items. For example, you can turn an unnecessary suitcase into an original coffee table by simply screwing legs to it. This table will add charm to both a bachelor’s apartment and a family living room decorated in a classic style.

2. Boards

Instead of going to a furniture store and buying ready product, get creative and go to a construction shop wooden blocks and metal legs. Next, you should connect the boards together and screw the boards to them. A table made by yourself is a unique and universal thing, as wooden furniture fits perfectly into any interior.

3. Battery

Have you purchased new batteries? However, do not rush to throw away the old one. cast iron radiator. Buy a piece of glass and turn an old battery into an original coffee table that you definitely won’t see either in the store or among your friends.

4. Framed window

An old framed window is a wonderful material to create a charming coffee table for your living room. Screw the wrapped legs to the frame rough ropes, and decorate the table surface with beads and shells.

5. Logs

A stunning low table can be made from small logs. First you need to assemble the base of the table from plywood, glue wooden beams around the perimeter, and cover the middle with a plywood lid. Next, you need to glue thin wooden cuts onto the plywood lid so that it seems as if the table is made entirely of logs, screw on the legs and thoroughly seal all the cracks.

6. Wooden cuts

Large wooden cuts are an amazing material for creating a beautiful and original table that will become a real highlight of the living room and will last for many years. Making such a table is as easy as shelling pears. You need to carefully process the wood and fasten the two cuts together, glue a wide wooden block-leg in the center and open the surface with varnish.

7. Pallet

Wooden pallets- an excellent material for creating your own different furniture: sofas, beds, chairs and of course tables. To begin with, you should get a pallet, thoroughly clean it and paint it in the desired color. All that’s left is to screw the legs and put the glass tabletop on top.

8. Wire reel

A large wooden reel for wires is a practical ready-made coffee table. Of course, it’s not so easy to get it, but if you’re lucky enough, you know what to do with it.

9. Tire

There are many ideas for creating original furniture from unnecessary car tires. For example, you can make a charming table out of a tire, a piece of plywood, a few pieces of wood and some rough rope.

10. Glass

A budget-friendly and very original table for a modern living room, the creation of which will require square-shaped glass and low wheeled legs.

11. Glass and books

An original idea for recycling unwanted books. Of course, this is not about fiction and works of classics, but here are old textbooks that gather dust idle on the shelves. In addition to books, you will also need a small piece of glass and a frame. Insert the glass into the pre-painted frame and attach finished design to columns of books.

12. Chest

Wooden table and basin.

Sometimes even a broken trough can do a good job. For example, it is useful for creating coffee table. In addition to the metal vessel that acts as a leg, you will also need a round tabletop made of chipboard or wood.

15. Old table

An old coffee table can be an excellent material for creating a new table. You just need to paint the legs and cover the table with fabric of the desired color.