Do-it-yourself corner bedside table made of wood. Do-it-yourself TV stand: how, where and why

Compact and almost invisible, the bedside table plays quite important role... It is convenient to put a lamp on it for reading or knitting before going to bed, put the phone down and set the alarm. Inside small drawers and open niches, it is convenient to store all the little things for a comfortable stay: favorite books and glasses, chargers for a laptop and tablet, care and hygiene items. Making a bedside table with your own hands will not be difficult. As a rule, such furnishings are endowed the simplest design and not difficult to assemble.

Ideas how and from what you can make a bedside table yourself

Purchase material separately to make bedside table do it yourself is unlikely to be a good idea. The expense is small. Therefore, they usually “figure out” from the leftovers.

There are incredibly many options for the designs of bedside tables:

It can be an open cantilever structure, a light shelf unit and a full-fledged chest of drawers.
Be made from the remnants of laminate, plywood, pallets, timber, MDF, solid wood and, of course, laminated chipboard.

Go through models and photos different ideas you can endlessly. As per modular bedroom collections renowned manufacturers, and just in the search in the pictures of google and yandex.

But in the end, the execution will rest only on the desire to do something and the available remnants of materials.

An example of how you can make a bedside table with your own hands, drawings and diagrams

Consider a typical do-it-yourself bedside furniture model. Drawing and diagram with instructions overall dimensions will look like this.

Making a bedside table from laminated chipboard of such a plan is separately unprofitable. It is more economical to do two of them at once or, for example, together with. It will cost much less than buying it ready-made.

The model is easy to assemble and can easily be made by a beginner. In fact, you will need to assemble the cabinet body and the box of the box. Pre-drilled several holes for confirms.

Do-it-yourself bedside table, calculation of parts and cut map

The detailing with the indication of the sides for edging is most clearly painted in the eksel plate. In fact, three types will be used sheet materials- laminated chipboard, fiberboard and MDF for the front of the box. However, in order to save money, it can also be made from chipboard.

If you spread out the details of the bedside table on a whole sheet, you can see that not much material will go away.

That is why I wrote above that making one copy is extremely unprofitable if there are no leftovers. After all, you have to buy a whole sheet of chipboard.

Drilling details and assembling the bedside table

After the parts have been cut, all visible ends are pasted over with an edge, you can proceed to the next stage. Drill blanks for assembly for confirmation.

I wrote in more detail about the nuances of drilling and subsequent assembly in the article on manufacturing. In fact, the products are similar in design. Therefore, I will not repeat myself. I will give only an additional drawing of the bedside table in three dimensions.

What you need to make your own bedside table

In fact, it all depends on what stages of work you do yourself, and which you delegate to the relevant firms.

For example, cutting and edging of parts can be ordered in the same place where laminated chipboard is purchased. And you can do it yourself. In this case, you will need a jigsaw for sawing, a sander for aligning the ends under the edge banding and an iron. As well as small improvised items:

tape measure, square pencil / marker for measuring blanks and drawing details;
sandpaper, shoemaking and stationery knife for cutting and sanding the edges after gluing the melamine edge with an iron.

For assembly, you need cross and hex screwdrivers (it is convenient to use a ratchet), a screwdriver.

In addition to tools and improvised means, which, in principle, any master has in stock, you will need to purchase accessories and components for assembly. All this is given in the tabular form of the estimate.

Just create a similar Excel form for yourself, type in the formulas and prices to calculate the total amount of forthcoming expenses. I am sure that if you make a bedside table complete with a more significant item and lay out the detailing for the rest, the savings will be significant and will completely satisfy you. Good luck!

Self-assembled furniture will become excellent decoration any interior, moreover, will help to save money and emphasize the taste of its owner. Do-it-yourself bedside table is easy to manufacture, drawings for any selected model and assembly diagram are available for public access, and materials can be purchased at any hardware store. However, starting to make furniture, namely a bedside table with your own hands, you need to familiarize yourself with some of the features of the process and technologies.

Having decided to make a bedside table with your own hands, you need to decide on its future dimensions. To determine the parameters of a future piece of furniture, it is important to understand in advance what place in the room will be allocated for this element. Standard sizes the determination of the height by the level of the bed is considered, standard width is 50 cm, and the depth varies from 30 to 35 cm. A bedside table of this size is most often found in a furniture store.

If space in the room allows, then you can independently make furniture of any size. Height can be more or less than a standard bed. The dimensions of the bedside tables will depend only on the chosen design, as well as the materials from which it will be made.

Features of design and selection of materials

Having decided on the size of the future bedside table, you can proceed to the planning stage. To do this, it is necessary to determine in what style the furniture will be made, and to roughly imagine its appearance. You can choose already finished project presented on the Internet, or you can develop your own.

To do this, it is enough to depict a future table, a cabinet with your own hands on a piece of paper. Then draw each detail separately and paint their dimensions. A computer can greatly simplify the design process. There are many programs on the Internet that are used to create designs and drawings, many of which are used by furniture designers. For a start, the basic version of the simplest program is fine. It will help you understand exactly how the furniture design process takes place, in particular, how to make bedroom furniture.

A bedside table is a diverse concept. This can be a bedside storage for newspapers and a tea mug, or a stand for a huge TV with built-in speakers and an electronic rotary system to attract the viewer's attention. Such a simple concept - and an infinite number of execution options. A do-it-yourself bedside table is quite simple, but it is important to decide on necessary construction... A friend of mine needed a kitchen cabinet with one top drawer. Excuse me.

Appearance of the manufactured bedside table

To make a bedside table, you need

Here I give a list of tools that would be better for everyone to keep in constant readiness, along with a fishing rod, favorite gun and chess:

Drill screwdriver. The best will be a rechargeable one if the farm also has a hammer drill.
Set of drills. In this case, wood.
Bit set. If you want to assemble furniture with your own hands, the set should include a bit, which is a hexagon for confirms.
Hinge cutter 35 mm in diameter.
Iron.
Roulette.
Pencil.
A carpenter's tool called a right angle, with a ruler.
Sandpaper, dry cloth.

I will immediately notice about the iron and other objects that were incomprehensible from the first time. Since you will be forced to order sawing on the side (sheet Chipboard size 1830x2440 mm is the smallest), it makes sense to save on gluing the edge. Now we sell a melamine edging with a thickness of 0.5 mm in the color of the material, which is easy to glue yourself. Since it is with an adhesive base, it is enough to attach it to the required end with the beautiful side up and iron it with a heated iron. Press the edge while still hot with a dry cloth to achieve good adhesion. Surplus edges are removed with a blunt knife and the edges are sanded.

Detail of the bedside table

A do-it-yourself curbstone can differ in content, functionality and appearance. This largely depends on the amount that you are willing to spend on fittings. Here I am writing the detailing of the simplest and cheapest curbstone. Box without runners, facades - laminated chipboard.

772x500 - 2 pcs., Curbstone sides.
368x500 - 2 pcs., Bottom and shelf.
368x100 - 3 pcs., Plinth and two upper strips.
480x110 - 2 pcs., Drawer sides.
334х110 - 2 pcs., Box front and rear walls.
150x395 - drawer front.
515x395 - cabinet door.

All dimensions are for 16 mm chipboard.

We take a special kitchen countertop, 28 mm thick. Its size is 525x400 mm.

Fiberboard for the back wall of the cabinet and the bottom of the drawer:

670x395 mm - back wall.
475х365 mm - drawer bottom.

I already wrote how to glue the edge, now it's time to prepare the parts for assembly. The main fasteners for us are confirmations, for which it is necessary to drill holes. We drill into the plane with a diameter of 8 mm, into the end of the parts - with a diameter of 5 mm. The figure shows which parts are drilled into the end, and which into the plane - simply based on the general design of the pedestal.

Bedside table assembly diagram

List of required fittings

Do-it-yourself bedside table is also ours business card in front of everyone who doubted our strength, therefore even inexpensive option fasteners must be taken as seriously as possible. We buy furniture accessories in a store:

Confirmates 5x70 - 22 pieces. It is enough to screw the tie bars and the plinth onto one confirmation on each side.
Self-tapping screws 4x30 - packing. They will be useful for other household chores, but specifically here they are needed in order to screw the countertop to the upper slats, and the drawer front to the front wall of the drawer box. All this turns from the inside.
Self-tapping screws 4x16 - packing. This is a fastener for hinges and hardboard (fiberboard). You should buy with a secret hat, and deepen it into the bottom of the drawer so that you don't scratch the shelf.
Furniture hinges - 2 pcs. Since our cutter is 35 mm in diameter, we also buy the corresponding hinges.
Furniture handles - 2 pcs. On the front of the drawer, it is better to additionally buy screws for handles, 35 mm long.

Assembly diagram of the drawer of our pedestal

Making a bedside table

It is better to coordinate the manufacture of bedside tables of such a model with friends or acquaintances - simply because two and a half pieces of them can be made from a chipboard sheet. The assembly is so simple that you can start selling "extra" bollards. For the complete satisfaction of potential customers and your own, screw the furniture legs, the so-called "hooves", onto the sidewalls from below. They will help to set the cabinet on uneven floors. Adjustable feet of this type can also be found in specialist furniture stores.

Ready bedside table

How to make a bedside table with your own hands in general outline we have already understood - it remains to take into account two very important technical points.

Selection for hinges. There is one constant to remember: The distance from the edge of the front to the center of the hinge hole is always 22 mm. Naturally, for hinges with a landing dimension of 35 mm. Above and below the door, it is usually marked at a level of 60-80 mm - this is not critical, if not design features... Then you can simply attach the facade with the hinges screwed to the sidewall on the right height and fasten to the body.
Right angles. When assembling a drawer or box of a pedestal, always check the geometric correctness of the resulting parallelepiped. Otherwise, the product will turn out to be lopsided and with badly opening facades.

That's all, good luck with your work.

Making any furniture, whether , hallway- always starts with creation drawing, sketch or project... Call it whatever you like, the essence of this still does not change. Draw a blueprint for the future Anyone can, even the most novice master, who has basic knowledge of descriptive geometry and arithmetic and who has by hand clean paper, a pencil, a ruler, and an eraser.

Professional furniture designers approach this business, more seriously armed with a computer and a special software... The advantages of this method are obvious:

minimizing the likelihood of possible errors.
complete presentation appearance future furniture in 3D.
accurate calculation of the amount of consumables and project estimates.
obtaining all drawings for future assembly

But if you are not going to be engaged in the production of cabinet furniture professionally and, say, you want to assemble a wardrobe, kitchen or hallway with your own hands, for yourself or your relatives, then you absolutely have nothing to buy expensive programs, spend weeks and nerves, for something, to master them and, ultimately, get the long-awaited blueprint.

For this we need all the items listed at the beginning of the article. Let's add another calculator, who is bad with arithmetic, and, of course, we will have patience.

Consider how to create your own furniture projects using a simple bedside table as an example. If, after a thoughtful reading of this article, you can independently calculate the bedside table, then I can assure you that you will be able to design any cabinet furniture, be it a kitchen, a wardrobe or a hallway (you just have to order.). The word project means not just a sketch or drawing, but also detailing of the product, without which it is absolutely impossible. So, we draw a bedside table:

Let's set the conditional dimensions and show them in the drawing. Let the height of our bedside table be 800 mm; width 400 mm and depth 500 mm.

In order to calculate the detailing of this product, it is necessary to know several basic dimensions, namely: the thickness of the chipboard panels, the thickness of the table top and the distance necessary to fasten the drawer pull-out system. Depending on what materials will be used, these dimensions may vary. For example, the thickness chipboard plates can be 16 mm, 18 mm and 22 mm.

In our bedside table, we will use a traditional 16 mm thick chipboard, a traditional 28 mm thick tabletop and traditional roller guides that add 13 mm to the width of the drawer on each side (therefore, 26 mm on both sides). By the way, if you use telescopic drawer systems, the 26 mm size remains in effect. Take our word for it - these three sizes are fundamental when creating ANY furniture project, so I recommend you just keep them in your head.

For simplicity of calculations, it will be better to draw the product without facades, drawers and countertops, so that all elements of the frame are clearly visible, as shown in the figure below. It is worth noting that it is better to show the product in isometric view and draw the thickness of the panels and the principle of their joining as shown in the drawing.

Please note that now the height of the bedside table is no longer 800 mm, but 772 mm. we have subtracted the tabletop thickness equal to 28 mm.

Now we need to calculate the dimensions of all the frame parts, which in our case will be made of chipboard 16 mm thick. Let's start with the side struts. Their dimensions are visible in the drawing 772 * 500 - 2 pcs. I think you guessed that 2 pcs. this is the number of parts. I would like to note that if you deal with texture material(imitating a woody texture), the consistency of sizing is important. The first dimension is ALWAYS along the texture, the second ALWAYS across the texture. If the material has no texture, then consistency is not important. While everything is clear, then let's move on.

Let's calculate the base of the bedside table. To do this, set the size of the bottom height from the bottom edge of the product, as well as the distance of the middle shelf from the top bar. Let the first size be 100 mm, and the second 150 mm. Like all sizes of our bedside table - we also set these conventionally. Now let's show these dimensions in our drawing:

The height of the base of the bedside table, as can now be seen from the drawing, is equal to 100 mm, and we find the width by subtracting the thickness of the two racks from 400, i.e. 32 mm (16 + 16 = 32). We get 368 mm. So, our base 100 * 368 - 1 pc.

Next, we calculate the shelf and the bottom. The length of the shelves is the same as the base / plinth width of 368 mm, and the depth is equal to the depth of the entire structure, i.e. 500 mm. We get - shelf and bottom: 368 * 500 - 2 pcs. It is worth noting that when calculating the shelves at the curbstone with MDF facade under glass, the depth of the shelves must be made 10 - 15 mm less than the case, so that when the door is closed, the applied glass does not rest against the shelf.

And finally, the last details of the frame of our bedside table are the upper strips, to which the tabletop will be attached through the holes with screws. Of course, it was possible to put a whole panel in place of the slats, but in order to save material, we will not allow ourselves this.

The length of the strip is calculated in the same way as the length of the shelf, bottom and width of the base and is equal in our case to 368 mm. We will set the width of the plank ourselves. We will have it 80 mm (this is quite enough). We get 368 * 80 - 2 pcs.

Next, let's calculate the details of the box. To do this, it is not at all necessary to draw a box in the drawing, but in our case I will do it for clarity (for more details on how boxes for telescopic guides are calculated, see).

The length of the side of the drawer is ALWAYS equal to the length of the rail and is equal to or less than the depth of the body of the entire structure. In our case, 450 mm. To calculate the boxes, you need to know that the guides are 250 mm, 300 mm, 350 mm long. etc. up to 600 mm. Telescopic rails can still be 700 mm and 800 mm. As you can see, all the numbers are round, which greatly simplifies the calculations. The height of the side of the drawer is ALWAYS equal to the height of the back and front walls and is calculated based on the specified size between the top bar and the shelf. In our case, it is 150 mm. If we want our drawer to be as deep as possible, it is necessary to set the minimum distance between the bottom of the drawer and the shelf is 10 mm and between the top edge of the drawer and the top bar is 30 mm. Only 40 mm. We get the height of the side, rear and front walls of the box 150-40 = 110 mm.

Further, we consider the length of the back and front walls of the box. To do this, subtract 32 mm from the thickness of the two side racks from 400 mm, we get 368 mm. Now we subtract 26 mm from 368 mm (we keep this size in our head from the beginning of the article) onto the guides we get 342 mm. We subtract another 32 mm (the thickness of the two sides of the box) and as a result we get 310 mm. So, the dimensions of the details of our box. Sidewall: 450 * 110 - 2 pieces; back and front walls of the box: 310 * 110 - 2 pcs.

Now that we have calculated all the detailing of the cabinet of the bedside table, we can start calculating the facades. There are only two facades in our product, these are the drawer facade and the bedside table door. Determining the width of the facades is not difficult at all. This requires from total width structures (and we have it equal to 400 mm), subtract 2 mm on each side, only 4 mm. We get the width of the facades 400-4 = 396.

Next, we calculate the height of our door and the front of the drawer. Let's start with the door. Before calculating its height, you need to know the distance between the bottom and the shelf. We look at the drawing and see that if from the entire height of the structure (772 mm) we subtract three thicknesses of chipboard (48 mm), the height of the base (100 mm) and the distance between the shelf and the upper bar (150 mm), then we get 772-48-100-150 = 474 mm. Let's show this size in our drawing.

Now to this value it is necessary to add 14 mm to the facade whip to the bottom and 6 mm to the shelf. Note that the whips are different. Why? Our door finds itself completely at the bottom of the facade, so we retreat from the edge of only 2 mm (16-2 = 14), but the door finds only half on the shelf, now we retreat 2 mm from the middle of the shelf thickness, i.e. 16: 2 = 8; 8-2 = 6. It turns out that the amount for whips to the bottom and the shelf is 14 + 6 = 20. Now add these 20 mm to the previously obtained distance of 474 mm between the bottom and the shelf, then we get the height of our door: 474 + 20 = 494 mm. The height of the drawer is calculated in the same way: to the distance between the shelf and the top (150 mm bar), we add the amount for whips (20 mm), we get the height of the drawer front: 150 + 20 = 170. So the dimensions of our facades: door 494 * 396 - 1 pc; box 170 * 396 - 1 pc.

For ease of calculating the width and height of the facades, it is necessary to remember three CONSTANT sums for whips.
1) with a façade whip on both sides for the entire thickness of the cabinet wall 28 mm.
2) with a whip of the facade on one side for the whole, and on the other half for the thickness of the wall of the body 20 mm (as in our case).
3) with a facade whip on both sides by half the body wall thickness of 12 mm.

All three amounts are relevant only with a chipboard thickness of 16 mm.

And the last thing that remains for us to calculate is the size of the back wall, the bottom of the fiberboard box, and the width of the table top. Let's look at our drawing again. To calculate the height of the rear wall, subtract the height of the base (100mm) from the height of the case (772mm). And stepping back 2mm on each side, we get: 772-100-2-2 = 688mm. The width of the back wall is the width of the entire structure (400mm) with 2mm indents on each side. We get 400-2-2 = 396mm. So, the size of the back wall of our bedside table: 688 * 396-1pc. The bottom of the box is calculated based on the dimensions of the box perimeter. The length of the bottom is equal to the length of the side wall of the box, i.e. 450mm, and the width is equal to the length of the front wall in total with the double thickness of the sidewall of the box, namely 310 + 16 + 16 = 342mm. Received the size of the bottom of the box: 450 * 342 - 1 pc.

And finally, the width of the table top is equal to the width of the entire structure, namely 400 mm. The size of the depth of the tabletop can be set independently or you can use the standard 600mm.
As a result, we got a drawing of the bedside table with detailed detailing:

772 * 500 - 2 pcs. racks
100 * 368 - 1 pc. plinth
368 * 500 - 2 pcs. shelf and bottom
368 * 80 - 2 pcs. upper planks
450 * 110 - 2 pcs. drawer side
310 * 110 - 2 pcs. front and back walls of the drawer

494 * 396 - 1 pc. door
170 * 396 - 1 pc. box

688 * 396 - 1 pc. back wall
450 * 342 - 1 pc. bottom of the box

table top

400 * 600 - 1 pc.

Now you just have to choose and order it. Remember, high-quality cutting of chipboard will help you avoid problems when assembling the product you have designed.

Successful work!

Source - http://mebel-id.com

Televisions are becoming more compact. TV models make it easy to mount them on the walls, on special brackets. Despite all the newfangled interior solutions, the TV stand does not lose its relevance.

The interior itself does not always contribute to the possibility of wall fixing. This can be prevented by the window opening or the materials from which the walls are made, which do not allow the bracket to be fixed. In addition, the functionality of the TV bedside table allows you to place a variety of equipment or other items on it.

Each buyer draws an ideal model for himself, which will not only fit into the interior in terms of dimensions, but will also correspond to it in terms of colors and style.

Not every material requires finishing.

Wooden elements can also be decorated with artistic carvings on external walls or countertops.

Each buyer draws an ideal model for himself, which will not only fit into the interior in terms of dimensions, but will also correspond to it in terms of colors and style. A wide selection of furniture products, including TV cabinets, allows you to purchase, it would seem, any model. Faced, however, with a specific task of choice, a person is often faced with the fact that either the size, the color, or the design do not fit. It is this factor that pushes many people to start making furniture with their own hands.

Making a TV stand with your own hands is quite simple. To do this, you just need to choose the right model, focusing on your professional level. The choice of material for the fabrication of the structure is also critical. Some materials make it easy and convenient to work with them even for beginners, while others require not only skills, but also special tools for processing. Assembling a TV bedside table with your own hands requires scrupulousness and a properly built step-by-step scheme for mounting parts.

Faced, however, with a specific task of choice, a person is often faced with the fact that either the size, the color, or the design are not suitable

In addition, you will need screws, self-tapping screws and four guides for further fixing the manufactured boxes on them.

The inner wall should not be removed, because it gives the structure additional strength, preventing it from sagging under the weight of the TV.

We draw a drawing of the future bedside table

For novice furniture craftsmen and just amateurs, it is best to use ready-made bedside table drawings. A lot of options can be found on specialized sites. When choosing a drawing, you need to focus not only on the final result, but also on the complexity of manufacturing and assembly. An important factor is the material recommended for manufacturing.

Some designs require certain materials that may not be suitable for the craftsman in terms of price or durability. For example, models with narrow countertops and shallow cabinet depths can support a lot of weight when made from solid wood. The use of chipboard in such cases will sharply reduce, possibly, allowable rate load on such a bedside table. Therefore, it is extremely important to assess the weight and width of the TV that will stand on it. It is also necessary to remember about additional accessories that will be needed when using the TV, it can be speakers, a video player, and more.

Often, a TV bedside table can hold CDs, magazines, newspapers and decor items. This should also be taken into account before starting the drawing with your own hands.

Making a TV stand with your own hands is quite simple.

The list of tools can be shortened or expanded depending on the complexity of the product and the materials selected.

Often, the decor of TV cabinets is to combine various materials and decorating it with glass pieces.

We choose the best options for materials for work

A variety of materials allows you to make both very cheap and simple models, and aim at chic. Not every TV cabinet can be made with your own hands using any material at hand. Some designs involve only wood or only plywood. There are more universal designs, which you can make with your own hands from existing scraps or leftovers from other furniture.

When making a curbstone, you can use:

Plywood.
Bar.
Wood, in the form of glued panels.
Array.

You can also make a curbstone partially from glass or decorative plastic. These materials are most commonly used for countertops and furniture doors.

Chipboard is the most unpretentious option for work; it does not require any special cutting tools or grinders... It is easy to cut and process. Its obvious advantage is the price.

When buying wood, you should pay attention to its quality. An important nuance is the absence of defects and dryness of the purchased material. Damp wood can deform indoors, thereby damaging the finished product.

An important nuance is the absence of defects and dryness of the purchased material.

Damp wood can deform indoors, thereby damaging the finished product.

You can make a bedside table with your own hands only with a jigsaw.

Preparing tools for work

You can make a bedside table with your own hands only with a jigsaw. Some craftsmen do even without it, ordering sawing according to a drawing when buying a material. Do-it-yourself furniture assembly still requires the following professional and non-professional tools:

Pencil, marker, or other writing object.
Thick cardboard for making patterns.
Ruler and tape measure.
Compass if some workpieces will have a round shape or rounded edges.
Jigsaw with files of the required size.
Clamps for gluing parts.
Glue.
Tape for trimming trimmed edges.
Screws, self-tapping screws, confirmations.
Grinding machine.
Drawer guides for bedside tables.

The list can be shortened or expanded depending on the complexity of the product and the selected materials.

Chipboard is the most unpretentious option for work; it does not require any special cutting tools or grinders.

When buying wood, you should pay attention to its quality.

Stained-glass doors look beautiful, although these structures are more fragile than solid sheets glass.

Step-by-step instructions for making a bedside table

Preparing the drawing. We take a ready-made and verified drawing, or we develop it ourselves, taking into account the size of the TV and its weight.
We make patterns for all the elements. This stage will allow you to accurately calculate the material consumption and not make a fatal mistake.
We cut out materials.
Grinding cut edges. When working with wood, you will have to grind not only the cuts, but also the rest of the surfaces.
We glue the edges with tape. This step is necessary when using chipboard material. You will need an iron and a soft cloth to glue the tape.
We assemble the cut out parts. The assembly is always carried out according to the same scheme. You should start from the countertop. Legs or side backs are attached to it. Then the bottom shelf is screwed on. After general construction assembled, we fill the curbstone with additional details - middle shelves. The backrest and doors are attached in the penultimate order. If there are boxes, it is necessary to provide for the preliminary fastening of the guides to inner sides side walls.
The last step in the assembly is attaching the legs, rollers, or overlaying heel pads.

Assembling a TV bedside table with your own hands requires scrupulousness and a properly built step-by-step scheme for mounting parts.

Not every TV cabinet can be made with your own hands using any material at hand.

There are also more versatile designs that you can make with your own hands from existing scraps or leftovers from other furniture.

You can also make a curbstone partially from glass or decorative plastic.

We make a long TV stand with our own hands

To make a cabinet with our own hands, we take a laminated chipboard of the color you like. Chipboard width 16 mm or 18 mm.

Insert a picture - http://prntscr.com/fit8k0

Required details:

Two sheets of 1600x454 mm for the table top and the bottom of the product.
Three walls 545x454 mm.
Shelf 767x454 mm.
The back wall is made of MDF 1600x545 mm.
Two drawers measuring 759x223 mm.
4 decorative handles.
4 legs.
4 heel pads.

In addition, you will need screws, self-tapping screws and four guides for further fixing the manufactured boxes on them. Between the drawers, it is advisable to make a shelf made of MDF, measuring 767x454 mm.

To make the boxes, you will need two pieces of MDF, 750x445 mm each, which will be used to create the bottom of the box. The side walls of the drawers will require four pieces of chipboard measuring 450x220 mm. And two pieces of chipboard measuring 755x220 mm, from which the back wall of the box will be formed. Assembly drawer starts with the connection of the side and rear walls... Then the MDF bottom is attached. The last element is screwed on the front part, on which the decorative handles are preliminarily fixed.

It is quite difficult to make a bedside table with drawers, so this model should be taken only by craftsmen who already have certain skills in assembling furniture.

The same model can be assembled without using a cradle. The second compartment can be left without a partition in order to be able to put there more voluminous elements of equipment or decor. Or it can be made identical to the first compartment. The inner wall should not be removed, because it gives the structure additional strength, preventing it from sagging under the weight of the TV.

Having assembled a TV stand with your own hands, you can get not only a unique design, but also significantly save on buying a finished model.

A variety of materials makes it possible to make both very cheap and simple models, and to be chic.

You can use clear, dark, mirror glass.

We customize the curbstone by means of decor

Not every material needs finishing. Film faced plywood looks completely self-sufficient and without additional decoration. Chipboard has glued decorative surfaces and besides pasting the cut edges, they will not require painting. Solid wood is perhaps the finest in this sense. It must be primed and stained without fail. This coating helps to accentuate the wood grain and protect the wood from dullness, dust and moisture. If desired, the tree can be painted or varnished. Wooden elements can also be decorated with artistic carvings on the outer walls or countertops. Any materials can be painted, covered with decorative foil, stencils applied.

Often, the decor of TV cabinets consists of combining various materials and decorating it with glass parts. The glass used must not be less than 8 millimeters thick. You can use clear, dark, mirror glass. Stained-glass doors look beautiful, although these structures are more fragile than solid sheets of glass.