How to restore your old table with your own hands. How to make a new piece of furniture from an old "bored" kitchen table Restore a coffee table with your own hands

Furniture, which is varnished, is returned to use. After all, lacquered products look rich, and give originality and solidity to the interior. Although, what to prevaricate, her surface is quite problematic. It can be easily damaged. A very common defect is the occurrence of scratches. You should not immediately get rid of the damaged table, but you should try to restore it. You can entrust this process to master restorers or try to restore a lacquered table with your own hands.

Restoration technique

Let's figure out how to restore a varnished table by the restoration method. This is one of the most better ways returning a decent look to a varnished table. For example, to eliminate scratches, it is necessary to remove a layer of varnish on defective places, and then apply a new one. This method is quite effective and allows you to get rid of any scratches. But not only scratches are a problem for lacquered furniture. The next disadvantage that may appear over time is darkening. lacquered surface. As a result of clouding of the surface of the countertop, appearance the table begins to lose significantly in relation to other furniture. Such a defect is corrected in a similar way: removing the old layer of varnish and re-applying a new one. This method is quite simple, and it is quite possible to varnish old table with your own hands.

The sequence of restoration work

You can update an old lacquered table in several stages. But first you should prepare some tools and materials and think about your safety. So, let's get acquainted in detail with the algorithm for performing work on the restoration of a varnished table.

Determining the degree of wear

Before restoring the varnish on the table, you should initially assess the degree of defects formed.

Choosing a material

The question arises how to remove the varnish from the table. To ensure the quality of the restoration, it is necessary to choose the right materials. Many people think that problem areas can be removed with alcohol. In some cases, minor defects can indeed be applied with alcohol, but unforeseen consequences may occur, such as roughness, light areas, and so on. Therefore, we will focus on specialized materials that will be good helpers for beginners.

Shellac polish. Such material not only helps to restore the surface, but emphasize its originality. This is one of the oldest and most proven materials. The consistency of the polish is more like a liquid than a varnish. To achieve a high-quality result, this composition is applied about 50 - 60 layers. It is because of this that the original deep color is achieved. This is very good option, which will allow you to remove scratches on a varnished table.
Nitrocellulose varnish. This solution is used to restore large surfaces of the table. For its application, sprayers are used, which provide a very fast and uniform spray. At a lower speed, the droplets of the solution begin to solidify, and it will be quite difficult to achieve the desired effect of a smooth and uniform surface. That is why the use of standard spray guns is not recommended, which additionally form air bubbles, which are almost impossible to get rid of.
Pentaphthal varnish. This perfect material for the restoration of the table, as it is quite simple to use. It does not require special devices for application and dries fairly quickly. Apply it in at least 4 layers. It is possible to exclude the purchase of primer solutions, since the first layer of pentaphthalic varnish will act as a primer. After applying the composition and its complete drying, grinding should be done.

After you have decided on the choice of the restoration composition, you need to pay attention to such a moment as the definition of color. You can use a colorless varnish, or you can purchase a varnish that mimics the color of any wood. In the second case, it is necessary to correctly determine the tone of the varnish.

Step-by-step instruction

Let's bring detailed instructions, which will answer the question of how to properly varnish a wooden table. It consists of several stages:

The preparatory stage consists of the following aspects:
the surface of the table is thoroughly cleaned with a specialized composition or with ordinary warm water;
remove the damaged layer with a scraper;
we begin to grind the surface with sandpaper until it becomes dull;
clean the surface from dust.
Applying varnish to water based:
the surface is covered with several layers of water-based varnish;
each subsequent layer is applied after the previous one has completely dried;
after last layer completely dry, perform surface grinding;
clean the surface from dust.
Performing work with acrylic-based varnish:
initially we choose a varnish that matches the surface of the table in terms of shade and gloss;
diluting the varnish by 15% with white spirit, we prime the surface;
after the primer layer has dried, we perform intermediate grinding;
we cover the surface of the table with undiluted varnish in several layers, allowing the previous layer to dry first;
We perform surface polishing.
Please note that after applying all layers to give the surface a glossy sheen, the surface should be sanded.

By following all the recommendations, you can get a very high quality varnished surface. It is clear that in order to get decent quality, you should use an airbrush. Below is a translated video on varnishing the table and given helpful tips for restoration.

Video: Varnishing. Original and simple workshop at home.

Video: The varnish is dry. What to do? New life old furniture.

Video: Common mistakes when painting with a gun

Video: We turn pine into wenge.

To give gloss, exclusivity and chic, to make an unusual accent in the interior, you can use original table. And no one will guess that this piece of furniture used to be an unsightly ruin.

Restoration methods

There are many ways to improve, decorate and restore an old table. But before starting work, it is necessary to prepare the future “canvas” - remove the old coating, sand it, tighten all the nuts and screws (so as not to stagger and hang out), putty, cover with stain (if necessary) or varnish. Then start decorating. Conventionally, all methods of decorating a wooden table can be divided into two groups:

Surface painting, including self-painting, coloring through a stencil or using stamps;

Surface pasting special materials - wallpaper, self-adhesive film, decoupage with napkins or interesting clippings, pasting with leaf, photo printing, the use of mosaics or tiles.

The glass table will have to be updated a little differently. It is quite possible to glue it with wallpaper, film or decoupage from the inside.

You can also paint the glass surface with special paints and get an interesting design.

How to update a glass table?

Beautiful glass coffee table fairly common in modern apartments. As a result of improper care glass top loses its attractive appearance.

The legs are loosened, chips and scratches appear on the glass. If scratches have formed on the countertop that can fit a nail, then it is better to give the table to a special workshop, dispose of it or replace the glass with a new one.

If the damage is not so terrible, then you can try to reanimate this piece of furniture.

You can save a glass countertop from scratches at home as improvised (toothpaste, soda, transparent nail polish), and by special means(GOI paste, car polishes, polishing agents for precious metals).

First you need to clean the surface, then gently rub or apply the composition into the scratch. Do not overdo it, otherwise, instead of one scratch, you can get several more. Wait a little for the composition to set and clean the glass again.

To get rid of scratches, use the most ordinary, non-gel toothpaste. Soda is dissolved with water to the state of slurry, approximately in a ratio of 1: 1. GOI paste must be used proven, real. Clear varnish will not completely eliminate the problem, but only partially. At a certain angle of illumination, it will be noticeable that there were scratches in that place.

Wobbling table legs are also repairable. Usually, table legs are attached with special glue. This glue may dry out over time. It can be removed and replaced with a new adhesive. If the legs are attached to screws, self-tapping screws, then they can be untwisted and replaced with new ones.

Now the table can be given a completely new sound with the help of various decorating techniques:

Paste the table from the wrong side with a decorative film. When pasting the table with a film, do not allow the formation of bubbles. It is better to glue the film little by little, gradually moving the substrate away. If bubbles still appear, then you can pierce them with a needle and smooth them out;

Make decoupage. To do this, you will need pictures (for example, from napkins or on rice paper, or images specially prepared for this), PVC glue or special for these works, brushes, a file, decoupage varnish. The necessary equipment can be purchased at craft and scrapbooking stores;

Paint with stained glass paints. Acrylic contour, stained glass paints, cotton swabs and napkins, alcohol for degreasing the surface, a sketch of a drawing, adhesive tape - this is a set of items that will be needed for this work;

Fix the backlight around the perimeter of the table, led strip;

If the design allows, make a mini-garden, an aquarium or a bright composition of stones, shells. When the table has a small box that is covered with a tabletop on top, you can lay a pallet on its bottom and plant succulents there (plants that do not need frequent watering). Or decorate the box with shells, stones or other things.

How to restore a wooden table?

Wooden table can be made from MDF or chipboard, or from solid wood. In any case, the restoration of the old table at home will take place in several stages. Let's take a look at all these steps.

Preparatory- check all fastenings, disassemble the table and re-fix, clean the surface.

Removing the old cover. Sometimes it just takes special compound, which removes varnish, paint. But most often you also have to use coarse-grained and fine-grained sandpaper, grinder. You need to sand along the fibers, in order to avoid the formation of new scratches.

Repair of cracks and chips. To do this, you need wood putty or a polyester equivalent. After puttying, re-sanding. At this stage, you can stop and not carry out further work (except for varnishing), cover the wood with stain, which will give the table new color and view. For example, turn an oak table into an imitation of wenge or another type of wood. But when the damage is significant, the next stage is necessary.

Priming and subsequent puttying. Without a primer, the varnish will lie poorly and unevenly. For wood, an alkyd or shellac primer is suitable.

Giving the final design. At this stage, painting, pasting the table is carried out. If the table is to be painted, the paint must be applied in at least 2 coats.

Final coating with varnish or wax. Lacquer and wax must be covered in several layers.

This refurbished polished table will last for years to come.

Written or magazine, children's or toilet - regardless of its purpose, it will become an interior decoration, because you spent so much time on it and put your soul into it.

How to repaint?

Table painting is the most popular way of restoration. What could be more concise than a white table? Only black. Therefore, the choice of paint (acrylic or oil, enamel) is very important. It depends on what kind of paint the repair was made, or rather on its characteristics, how long the restored table will last.

To choose the paint, you need to understand where and how the table will be used, what materials it is made of.

Water-dispersion acrylic paint suitable for heated rooms, withstands moisture well. Dries quickly. Can be washed off with water during application. But after drying, it is not affected by water. Alkyd compounds are considered more reliable.

Oil paints lose their popularity due to unreasonably high consumption.

Enamels for wood attract with their glossy surface and high performance. Nitro-enamel paints also set quickly.

The paint is selected and purchased, further repair of the table involves painting it.

Surfaces must be pre-treated, cleaned, old coating removed, scratches and chips removed, puttied, primed, protected decorative inserts, for example, glass, adhesive tape. And only after the primer has dried, you can paint.

To give an even color, the paint is applied in several layers. The first layer is actually rubbed into the surface.

Two or three coats is enough to bring out the rich color.

To apply an additional pattern to the countertop, you can use pre-prepared stencils or the most common tulle. When the base color has dried, the tulle (or stencil) is fixed and the pattern is painted. You can do this with a brush, but it is better to use a sponge or a can of paint. Ready product, to give greater aesthetics and strengthen the surface, varnished.

To give a graphic pattern (lines, zigzags, rhombuses, squares), you can use adhesive tape. Mark the future drawing with adhesive tape, apply the first color with paint. If necessary, repeat the procedure with other colors. Varnish the finished tabletop.

If it is necessary to achieve the effect of aged wood, then first a special composition is applied to the treated surface (cleaned, sanded and primed).

Patination can be done with a dark stain. Then the first layer of paint is applied to the tree. Then a second layer is applied, lighter and more liquid paint. When the paint is dry, go over the surface of the sandpaper. The desired effect has been achieved.

The table is ready for top coat varnish.

We update the plastic table

Many are afraid to start decorating a plastic table because of its material. In fact, the plastic surface is a more grateful material for restoration. It does not require preliminary and long-term processing.

The maximum is getting rid of scratches and chips. Well, if the surface is even, then it is enough just to sand it a little to roughen it, paint or primer could better adhere, or degrease for further work– gluing films, wallpapers, tiles, mosaics, eggshell or decoupage.

To decoupage a plastic table, you will first need to process the countertop. Sand it, put acrylic primer. Then think about how you will arrange the drawings. Make small outlines of their future location. Usually, napkins or drawings on rice paper are used for decoupage, but for these purposes, you can use any clippings and even pictures printed on a printer.

At the end of the work, the tabletop is varnished.

For effective decoupage, you can use fabric. For decorating purposes, cotton material with a bright pattern is suitable. The decoupage procedure is the same, only PVC glue is applied immediately to the entire fabric.

Decor options

Restoration and subsequent decoration of the table is a very long process. But the result is worth it, because you can get an exclusive designer item with which memories are already associated. Furniture decor can be completely original and at the same time very organically fit into the concept of using the object and the room.

Suitable for a book table or folding table concise design. It can be dyed in one or two colors. And you can give nobility and accentuate the natural structure of the tree.

If you own an old table that needs to be updated, or you have purchased a table that looks very dull and you want to decorate it with something, then the tips below are just for you!

In fact, changing the look of a piece of furniture like a table is quite easy. And there are many ways in which this can be done.

Adhesive tape

Let's start from the very easy way- This is the use of self-adhesive film. Surely you have seen such a film in stores. It is sold, as a rule, in rolls, like wallpaper.

At the same time, it has a smooth surface that is easy to clean and which simply cannot be damaged or deformed in any way.

To get started, take measurements at home - exactly how much you will need to purchase this film. Take it a little with a margin so that there are no ugly joints on your table.

The very process of applying self-adhesive film is very simple - there is no need to prepare furniture before that. You simply separate the film from the paper and apply it to your table, gently pressing it against the surface.

The table does not even have to dry. It will immediately be ready for use in an already updated form.

Paint and stencils

If you're ready to go a little further than sticking a self-adhesive film on your piece of furniture, armed with paints and a brush, you can appear as a graphic designer.

The most important thing is to come up with a plot for your table. Think about what you would like to depict on it? It can be anything you wish. If you have the makings of an artist, you can start painting right away, with or without a sketch.

Note! Cape on the sofa - what should it be? 100 photos fashion novelties and design!

But if you are “on you” with art, do not despair! Stencils will come to the rescue. You can purchase a stencil at an office supply store or make your own.

To do this, it is enough to cut out a drawing from a magazine and use it as a kind of template, according to which this drawing will be transferred to your furniture.

Or draw any of the objects you like with a pencil on a sheet of paper, cut it out and, putting it on the table, paint over the gap of the cut out stencil with paint. After removing the stencil, you will see the drawing on the table.

If this method seems difficult to you, you can seek the help of a professional artist, for whom this type of work will not be difficult.

True, the services of the artist will need to be paid for and this method can no longer be called budgetary.

As for the paint that should be used, it must be moisture resistant. Most the best option considered acrylic paint. It is odorless and dries very quickly.

In addition, acrylic does not fade in the sun, is resistant to water and high humidity generally.

We can safely say that a table covered with acrylic paint will last you a century, and this will not be an exaggeration.

Decoupage

There is another way to decorate the table, which is very similar to using stencils. This method is simply called decoupage. What is it?

Any fragments of drawings from magazines, napkins, various albums are taken. It can even be photos from your personal archive or just pictures you like from the Internet.

In general, anything. You cut out the elements you are interested in and put them on the countertop. First, see if it looks nice. If you like the option and you are ready to decorate the table with these fragments, then you can get to work.

A piece of furniture must be carefully sanded, removed paint or get rid of the lacquer coating. The surface of the table must be clean, dry and perfectly flat. In general, it should return to its original appearance.

After that, you take pre-prepared elements or photographs, cover the back with PVA glue and put them on the countertop.

Such manipulations must be done with each photo. After that, you should cover all the superimposed pictures with varnish.

The varnish will prevent your table from unwanted damage, scratches and other kinds of deformations. Your photos (decoupage) will be under reliable protection. At the same time, table decoration will not only update it, but will also delight your eyes!

There are many table decor options. Most importantly, don't be afraid to experiment! And you will definitely succeed.

Photo ideas for decorating the table

Furniture items occupy a central place in the interior. So, in the kitchen or in the dining room, the main attribute is the kitchen table. In order for the product to serve for a long time, the housewives cover the countertop with a tablecloth or special napkins. But what to do if the furniture is damaged or deformed? In this case, you can restore the kitchen table with your own hands. Exists various ways and technologies for improving the appearance of the structure. Therefore, worn items should not be thrown away, because they are easy to repair, decorate and decorate.

Covering with self-adhesive film is the most economical option for updating the table.

Preparatory work

Before decorating the kitchen table with your own hands, you need to prepare the product. It must be free of dust and dirt. To do this, all elements of the table must be wiped with a damp cloth. In case of severe contamination of the product, special household chemicals can be used. After wet processing of structural parts, everything must be thoroughly dried. Otherwise, the accumulated moisture will contribute to the appearance of mold and fungal infections, which will negatively affect the quality of operation.

The wooden kitchen table must be carefully inspected. If cracks or gaps appear on its surface, then they must be processed with sandpaper. This will help strengthen the structure and make it easier to apply a new coating.

It is not only in its aesthetic transformation. It is necessary to take care of the reliability of fastening. Therefore, in order to update the kitchen table, it is recommended to detach all its elements. If the fastening mechanism is deformed, then it should be replaced. Strengthen fixation kitchen table It is possible with the help of additional metal corners and brackets.

Very often, the countertop of a kitchen set is equipped with a polishing coating. In order to update the old kitchen table, you need to remove the cover. Experts recommend doing most of the work in an open, well-ventilated room. The floor should be covered with unnecessary cloth or paper.

For finishing work you will need the following tools:

dry rag;
means for removing the polishing coating;
putty knife;
metal wool;
alcohol solution;
brushes;
gloves;
mask for the face;
sandpaper.

The brush is moistened in a special solution that serves to remove the polishing coating. It can be liquid or thick. For convenience, it is recommended to pour a small amount of the mixture into a separate container. This consistency is applied in a thick layer to a specific area. After that, you must wait until the surface absorbs the solution. For some areas, you can use a hard brush. Thus, cleaning the kitchen table with your own hands will not be difficult. To do this, you need to choose the right materials for processing.

Experts recommend that after removing the polishing layer, treat the surface of the table with sandpaper and metal wool, after which the base will become even. The resulting surface will be perfect place for decorating and creating a new design.

Tiling update

Decorative tiles are one of the most popular materials for facing kitchen sets. For self-design countertops, you need to measure it and choose the right material for it.

Tiles of various textures are durable and reliable for countertop cladding. The tile is good because it is convenient to wash it and that you can safely put hot dishes on it. To finish the kitchen table, it is recommended to choose elements with matte finish. For work you will need:

tile;
grout for seams;
plastic crosses;
special glue;
edge profile;
brush;
notched spatula;
building level;
dry rag (sponge).

A special tile adhesive is applied to the prepared and cleaned base of the countertop. This procedure should be done using a notched trowel. During fixation, the material will be firmly and securely fixed.

The tile is firmly pressed to the base of the table. The elements of the product are interconnected in the desired composition. Seams between materials are recommended to be strengthened with plastic crosses. Thus, the products will be fixed to each other at an equal distance. Via building level you need to keep track of the position of the parts.

After the main work is done, it is necessary to wipe the seams between the tiles. To do this, use a special mixture that can be purchased at any hardware store. The grout is applied to the base of the table after the glue has completely dried.

In order for the kitchen table to look beautiful and festive, it is recommended to decorate the side parts of the countertop. This procedure can be carried out using special edge profiles. They can be matched to match the appearance of the tile.

Restoration with paint

This method, which allows you to unusually update the kitchen table, is available for everyone. You can paint both the tabletop and the legs of the product. The color and design of the new construction depends on the preferences of the owners. In order for the kitchen table to become the central attribute of the room, it can be painted with bright paint. Decorating an interior item allows you to show imagination and skill and create an original masterpiece at home.

For work, it is recommended to purchase quick-drying paint and a brush. The work area should be spacious. The surface of the table is recommended to cover. Some homeowners prefer to use a solid color paint, but combining different shades will help create a unique furniture design. Some craftsmen use stencils for decoration: the main part is painted in one tone, and an original pattern is created on the sides or in the center of the tabletop using a stencil.

Decoupage technique

Decoupage napkins are ideal for decorating any kind of furniture.

Spray paint applies quickly and dries completely in 2 hours.

With their help, you can unusually decorate the table in the kitchen. The attribute should be decorated, taking into account the theme and style of the room. There is a large selection of applications that will perfectly complement the look of the countertop. In addition, the decoupage technique can be used for the side parts of the structure and frame the legs with it.

To work, you need to prepare tools:

napkins for decoupage;
PVA glue;
capacity;
brush.

With the help of glue, the pattern is transferred to the surface of the table. For work, you can use both special napkins and images from magazines and newspapers. If defects appear, they can be masked with paint. At the end of the work, it is recommended to treat the surface with varnish. This will significantly increase the service life of the product.

Table decoration methods

The variety of decoration methods allows the owners to radically change kitchen set. An affordable and practical method of decorating is self-adhesive film, which helps to decorate furniture on your own. It is enough to choose the desired shade of the material with increased density. Sticking a film on the base of the countertop allows you to update the product in the shortest possible time.

Some owners use old cuts of wallpaper to decorate furniture. To work, you need to purchase a special glue. Decoration with wallpaper will make the interior unusual and original. In addition, you can purchase wallpaper with imitation of stone, brick or tile.

In the reconstruction of old furniture, you can show imagination, ideas and skill. You should not be limited only to decorating the countertop. Replacing the legs will create new design in your own kitchen. Updating the table is available even to people who have never encountered such work. It is enough to use various decorative overlays and homemade decorations to radically transform this piece of furniture.

After all, this is a very exciting and creative process. In addition, it is much more pleasant to have unique interior items at home than to buy replicated furniture. It is also necessary to take into account the fact that repairing worn-out chairs and cabinets is much cheaper than buying new furniture.

Painting a table using the doodling technique is a complex and time-consuming process, but you only need a sketch, a marker or paints, and varnish.

But if this is your first time taking on such work, then you should start by reworking a fairly simple item. For example, restoring a coffee table with your own hands does not require special knowledge and skills. And you can completely restore it in just a couple of evenings.

Preparing to remodel the table

Before giving a coffee table a new look, it must be carefully prepared. To do this, you will need the following tools:

grinder or a special nozzle for a drill;
a set of sandpaper of varying degrees of graininess;
flat metal spatula;
Screwdriver Set;
wrench.

Restoration of a coffee table in the style of craquelure - creating a cracking effect.

First you need to disassemble the table, remove the tabletop, legs, disconnect the shelves and drawers. Remove all fasteners very carefully, trying not to damage the wood. If necessary, dried bolts can be cut or drilled. Be sure to remove all fittings, even if you intend to reuse them.

Next you need to remove decorative coating. The veneer is easily separated if its edge is picked up with a spatula. Lacquer coating at home, restoration is not subject, so it must also be removed. old oil paint it is easier to scrape off if it is preheated, for example, with a building hair dryer. Be extremely careful not to scratch the surface.

Each detail must be carefully sanded to bare wood.

All large cracks and chips must be puttied. For this, a tool designed for woodworking is suitable. If desired, it can be tinted with a few drops of water-based paint or a special pigment that is sold in stores. small scratches and cracks are filled with epoxy glue. After the putty is completely dry, the surface of the furniture must be processed again with fine-grained sandpaper.

Now the coffee table needs to be reassembled, replacing all fasteners with new ones. Be sure to coat the sockets for fastening with glue and tighten them with clamps for about a day. At the last stage of preparing furniture for decoration, all surfaces must be thoroughly degreased.

Back to index

Mosaic table top decoration

Figure 1. With the help of a mosaic, you can not only make a coffee table unique, but also hide the cracks and stains that have appeared. In addition, the whole process will not take much time and money.

Any alteration of a coffee table begins with its painting. You can cover the entire surface with stain, then the structure of the wood will come through more clearly. Typically, a transparent agent or stain is used, which includes coloring pigments. In this way, furniture is given a resemblance to expensive woods: oak, sandalwood or ebony.

If you want to paint your table, then it is wiser to use acrylic paints. They dry quickly, do not leave streaks and have virtually no unpleasant odor.

In combination with a tabletop decorated with a tiled panel, both dark and light furniture looks great. Therefore, the appearance of a coffee table depends entirely on your taste and the overall interior of the room in which you are going to use it.

But it should be remembered that yellow spots may appear under light paint on old furniture over time. In order to prevent this from happening, the table must first be covered with 1 layer of transparent acrylic varnish.

After the varnish is completely dry, 2 coats of primer are applied to all surfaces. It will add strength to the final coating. Lastly, the coffee table is painted. It is most convenient to use spray paint in cylinders. Such a coating is obtained even, with a slight glossy sheen. In addition, using a spray gun is easier to paint over hard-to-reach places. But sometimes such dyes (unlike traditional acrylic paints) have a pungent odor. Therefore, it is more reasonable to carry out work in a well-ventilated room or on the street.

Now you can start decorating the countertop.

Back to index

Product decoration

For a mosaic panel, you will need the following materials:

tile (best to buy ready-made modules fixed on a grid or paper);
tile adhesive;
grouting mastic (you can purchase a colored product that will add expressiveness to the panel);
masking tape.

In addition, you will need a small notched trowel, an old toothbrush, clean rags, and a large cleaning sponge.

Tile adhesive must be diluted as indicated in the instructions. Do not cook a lot of composition at once. You will need approximately ½ cup of mortar to lay tiles on your countertop.

Using a spatula, apply adhesive to the wrong side of the tile block. Turn the module over and press it against the surface so that excess adhesive shows through the mesh. With a clean rag, remove excess compound, carefully scrubbing the mosaic. But do it carefully, otherwise the module may move. The table must be allowed to dry for approximately 24 hours.

small rubber spatula the composition is applied to the seams between the tiles. Then, with a toothbrush, you need to “drive” it into the gaps of the module. This is required in order to remove air bubbles from the grout. The mastic must be allowed to dry for 15-25 minutes, and then remove its excess by washing the resulting panel with a sponge.

The result of this decoration can be seen in Fig. one.

In this way, you can transform not only a coffee table, but also, for example, a bathroom cabinet.

Back to index

Decor with wallpaper

Figure 2. Decorating a coffee table with the remnants of wallpaper will help it blend in harmoniously with new interior premises.

Do-it-yourself furniture can be transformed even with the help of a piece of wallpaper that remained after the repair. Such a restoration will take you about 2 hours, and as a result you will get a very elegant piece of furniture made in Art Nouveau style. Such a coffee table is quite difficult to find even in salons. exclusive furniture. To remake the table, you will need the following materials:

vinyl wallpaper (their size should be equal to the area of \u200b\u200bthe countertop plus 15 cm of hem allowances on each side);
wallpaper glue;
transparent furniture varnish or a special composition for decoupage;
furniture carnations with decorative heads.

Also, do not forget to prepare a plastic spatula, brushes or rollers for applying glue and varnish, centimeter ruler, Pencil And Hammer.

If you have chosen this way of transforming your coffee table, then it is better not to pre-paint the tabletop, but cover it with 2 layers of furniture varnish. Before you start decorating, the surface must be completely dry.

Dilute the wallpaper paste and let it swell for 10-15 minutes. This time is just enough for you to remove from the countertop required dimensions and cut out the blank from the wallpaper. Be sure to cut the allowances in several places and notch them in the corners, cutting out triangles. Try on the workpiece, carefully bending the allowances.

Apply glue to the wrong side of the wallpaper, roll it up, allowing it to soak in the product. Glue can be smeared on the countertop itself.

Lay the wallpaper on the furniture, carefully smoothing out all the folds and creases. Use a plastic spatula to remove air bubbles. Bend the allowances and glue them to the inner surface of the table. Let the glue dry completely and coat the coffee table with 2 coats of varnish (letting the previous coat dry completely).

Then, using a ruler and pencil, mark the future location of the carnations. They can be placed in 1 line or make an interesting pattern from the heads. It is only necessary to ensure that the same distance is maintained between the caps. Drive nails along the markup.

The result of the modification is shown in Fig. 2.

Instead of wallpaper, you can use a piece of fabric, such as curtain satin. Then the countertop will also acquire an original texture.