Pasting old furniture with self-adhesive foil. How to wallpaper a wardrobe: ways to restore furniture

You don't have to buy to transform your home. new furniture... In place of this, you can update old items by changing them appearance, for example, you can finish an old wardrobe. Moreover, this does not require at all to have any special knowledge and skills.

Add furniture the new kind you can use wallpaper. The only thing you should be familiar with some of the nuances of the work in order to perform it as efficiently as possible. Therefore, further we will consider how the decoration of the cabinet with wallpaper is carried out.

Wallpaper selection

Using wallpaper is the simplest and at the same time the cheapest way to decorate furniture, however, the material for this should be used of high quality, otherwise all the work will be done in vain. As for the choice of color and texture, it all depends on individual preferences and the interior of the room.

If the walls are decorated in light colors, then it is advisable to select brighter wallpaper for the cabinet. In this case, the inner wall can be pasted over with material to match wall covering... If there is a drawing on the walls, then it is better to decorate the furniture in one color.

Often, furniture is pasted over with the same wallpaper as the walls or part as a special design reception interior decoration. Also, you can use canvases with a pattern for marble, wood or other material.

An interesting and unusual solution is to use wall murals on the closet. Moreover, you can purchase self-adhesive canvases, which will greatly simplify the pasting procedure. Of course, the choice of drawing in this case depends solely on your imagination.

When choosing a material, you should also think about its performance... It is advisable that it withstand wet cleaning, especially if you are going to upgrade. Conventional paper wallpaper should not be considered as an option, as they will quickly deteriorate if they are not varnished.

Advice!
If the furniture is defective, it is best to use a cover saturated color with small patterns or drawings.
This will hide the bumps.

In the photo - a variant of decorating the cabinet with wallpaper

Pasting the cabinet

Required tools and materials

To decorate a wardrobe with your own hands with wallpaper, in addition to the coating itself, you will need following materials and tools:

• Sandpaper;
• Ruler and pencil;
• Scissors;
• Putty knife;
• Primer for wood;
• Wood putty;
• Glue brush;
• PVA glue.

Advice!
In order for the furniture to really look like new, it is necessary to replace its fittings - handles, locks, etc.
Even if the price of the parts is relatively high, it still makes sense to purchase them.
For example, modern pens completely change the perception of even the most old furniture.

Training

This work consists of several stages and begins with the preparation of the product surface for pasting.

It is performed in this order:

• First of all, you need to remove from the cabinet all the old fittings, moldings, if any, dismantle the shelves, etc.
• If the cabinet is varnished, it is necessary to remove the varnish layer. This can be done with sandpaper. If a building hair dryer is available, then with its help the business will go much faster.

In this case, the varnish is heated with a hairdryer and scraped off with a spatula. However, at the end of the work, the surface will still need to be sanded to remove the remaining coating.

If the furniture is not lacquered, then it is enough just to give the surface a matt finish by "walking" on it with sandpaper.

• Then the surface must be cleaned of dust. To do this, you can wipe it with a damp sponge and dry it.
• Next, you should carefully examine the furniture for surface defects. All chips and cracks must be repaired with putty. If the chips or cracks are deep, then it will have to be applied in several layers.
• After that, the filled areas must be sanded with fine sandpaper.
• In conclusion preparatory work apply a primer and dry the surface well.

This completes the preparation, now you can paste over the wallpaper.

Wallpapering

Further instructions for decorating the wardrobe with wallpaper look like this:

• Work must begin by making a pattern of cabinet parts on canvas... To do this, it is necessary to carefully measure all the elements of the product and complete the corresponding drawings.
• Then the canvases must be carefully cut.
• After all the details are ready, you can wallpaper the cabinet... To do this, glue is applied to the surface with a brush and then canvases are applied. The most important thing is to stick the material evenly.
• The glued canvas must be smoothed.
• When the product is completely pasted over, you should wait until the glue dries.
• At the end of the work, you need to install the fittings and other parts of the product.

Note!
When the glue dries, it is necessary to exclude drafts in the room.
Otherwise, the finish may be damaged.

This completes the decor of the wardrobe with wallpaper. As practice shows, this technology allows you to achieve a much better result than when painting furniture. Especially if the work is not done by a specialist.

Output

Pasting the cabinet with wallpaper requires, first of all, accuracy. However, as we found out, there is nothing complicated in this work. Therefore, every home craftsman can update furniture in this way, the main thing is to choose quality material and follow a certain sequence of actions.

From the video in this article, you can find out more information on decorating furniture with wallpaper.

A person is designed in such a way that he needs to periodically update the situation. If finances permit, this can be done by buying new furniture. But if the family budget does not allow such expenses, then just update the facade of the old headset with a self-adhesive film.

With its help, you can give furniture a new look and eliminate defects that appear during its operation.

Recently, self-adhesive film designed for various furniture, is becoming more and more popular.

To give your furniture an unforgettable look, you need to choose the right self-adhesive decorative film. Modern industry offers various options of this material. From cheap polypropylene and polyethylene models to practical PVC claddings.

Each potential buyer can count on a variety of textures and colors.

It can be noted strength and durability, maximum safety in use, a variety of design options.

In addition to the material that forms the basis of the furniture film, you need to pay attention to the presence of a protective layer. In the kitchen, such a layer is important to protect against high temperatures and high humidity. If the self-adhesive film is used for pasting children's wardrobes and tables, then here too protective layer plays an important role.

It will help protect furniture from careless handling by the child.

If direct sunlight falls on the headset, then cover it with a cladding that has a layer that protects against ultraviolet radiation. Can be purchased today transparent models with such a layer.

He, without hiding the facades, will protect them from fading.

The presence of a protective layer adds to this material additional cost... But, without it it is impossible. If you are going to use the cladding in the bathroom, be sure to make sure that it has high degree moisture resistance.

The coating can be matte or glossy, imitate various materials.

Pasting of objects located next to heaters, stoves and other similar devices is carried out using a self-adhesive film based on a thermally stable polymer.

The modern assortment has an amazing variety, so you will definitely find suitable option for yourself.

The decorative layer can be made for stone, ceramics, fabric and wood. For furniture, "wooden" cladding or marbled material is suitable. Recently, photo wallpapers have been popular.

Especially if they are used for pasting wardrobes.

In addition to furniture, old doors, glass and even walls are suitable for processing with such material. The surfaces covered in this way can be easily washed.

Even a material that does not have moisture protection easily tolerates short-term contact with a wet sponge.

How to glue furniture over with self-adhesive film

One of the advantages of this material is the ability to work with it yourself. No need to look for specialists and pay for the service. You yourself can easily cope with this task.

You can successfully use self-adhesive type film to protect your table, windowsill in any room, countertops and kitchen furniture.

The most an important milestone facade processing is preliminary preparation surface.

After cleaning the surface from contamination, it must be degreased. Thanks to this procedure, you can avoid the appearance of wrinkles during pasting.

Any detergent or alkaline solution can be used as a surface degreaser.

After preparing the surface, we proceed to cutting the material. Sheets must be cut with a margin. This makes them easier to stick to the surface. If you need to take into account the pattern, then a margin of 2-3 cm is required. Without it, it will not be possible to accurately fit the drawing. Excess pieces are carefully cut off after the furniture has been pasted.

For the convenience of cutting the material, manufacturers print a centimeter scale (grid) on its reverse side.

It will not be difficult to stick the self-adhesive film.

If it was not possible to exclude bubbles, they are easily removed by piercing the lining with a thin needle. After gluing, the puncture site will not be visible.

Nuances that may appear when using self-adhesive film

Pasting flat surfaces will not cause problems for those who first encounter such work. Difficulty can arise when pasting corners. And here you can use a trick.

To make the corners of the sheets easier to bend, you need to take a regular handheld hair dryer and heat the material with it.

It is also difficult for a person who first encounters self-adhesive film to compile sheets of material. To avoid a gap, the sheets must be glued so that the next sheet overlaps the previous one by 1.5 cm.Then we apply a ruler to the central part of the allowance along the entire length. And along it, with the help of a sharp knife, we make an incision.

Remove the unnecessary strip. The joint will be perfect.

Lighting is important when working with this material. If it is not enough, then it is easy to miss minor flaws. They will become visible against the general background or in bright light.

With the help of the film, you can create unique interior and decorative solutions.

If you have purchased a self-adhesive tape that adheres too quickly to the surface and is difficult to work with, use powder or talcum powder.

Powder the surface over the entire area and you will have no difficulty in fitting the sheets.

How to remove self-adhesive film from furniture

Removing old cladding from furniture sometimes becomes a problem. If the material is of high quality, then it will not be difficult to remove it. But, if you are unlucky, and it is very difficult to remove, then heat the surface. Use the same hairdryer.

Warm up the material with it, and it will come off without much difficulty.

Adhesive tape- it's inexpensive modern material, which will help to update the appearance of furniture and protect it from moisture and ultraviolet radiation. It is not difficult to stick it on. The main thing is to do everything carefully and follow the tips described in this article.

Now you know how to ennoble and protect furniture and various surfaces with self-adhesive film.

VIDEO: How to stick the film on the table with your own hands.

Often there is a need to refresh the interior, give former appearance old furniture or increase the service life of new furniture, protect doors and window sills from external factors... An obstacle to the realization of such a desire may be a banal lack of time or finances.

Self-adhesive films for furniture, striking in a wide range of applications, will make repairs and extend the life of things dear to your heart cheaply and in the shortest possible time.

What is self-adhesive furniture film

Among the variety of materials that provide access to the embodiment of daring design solutions, manufacturers on the market have an impressive range of films with an adhesive base. Products in this category are sold in the form of rolls of various widths.

The structure of any kind of film is three layers. These are:

• Facial;
• Glue;
• Protective.

Depending on the raw materials used in the manufacture of products, the surface layer can be made of:

• Polymer film;
• Metallized foil;
• Paper.

The layer designed to fix the finishing material on surfaces is most often:

• Rubber;
• Acrylic.

The function of protecting the adhesive surface is realized by using siliconized paper, which can be removed directly during operation.

There are also different technologies production polymer material... Depending on the equipment used by the manufacturers, the film sold on the market can be one of the following types:

• Calendered;
• Injection molding.

The latter is more convenient to use, more durable, is able to maintain its previous appearance longer, opens up more ample opportunities application. This is due to the inability of calendered films to stretch when cooled, which means that they are glued only to smooth, even surfaces.

The ability of casting materials to stretch without the use of heat treatment opens up access to the finish of rough corrugated surfaces with projections in the form of self-tapping screws and rivets. The lack of shrinkage is also one of the advantages of cast films over calendered films, which can "shrink" over time.

Application advantages

• Versatility;
• Low cost;
• Ease of fixing on the surface, minimum time for repairs, no need to hire a team of workers;
• Ease of cleaning;
• Resistant to moisture;
• An abundance of textures and shades.

They are becoming a common option for interior decoration.

Selection criteria for self-adhesive film

If you want to buy a film in order to refresh furniture, a door, a kitchen or other elements of an apartment, it is worth considering a number of criteria for choosing a product. You need to take into account:

• Film quality;
• The condition of the surfaces to be pasted over in the future;
• The likelihood of damage;
• Aesthetics.

Quality

The first thing you should pay attention to when making a purchase is the quality of the product. The modern market is saturated with self-adhesive films for furniture made of polyethylene. The service life of the finishing layer made of such material leaves much to be desired, and giving preference to a product with a polymer layer, it is better to choose PVC.

Additional protective layer of UV stabilization - important elementprolonging the life of the film. The cost of the goods will be slightly more expensive, but the money spent will more than pay off due to the material's ability to withstand the effects of sunlight.

Many models of these products are considered universal. However, assuming the decoration of items located in the bathroom or in the kitchen, you should give preference to moisture-resistant film. Sections of walls near devices in the form of a heater, boiler or stove should be pasted over using thermally stable products.

Condition of finished surfaces

Deformation of old, unstable furniture can lead to tears and peeling of the film. Therefore, in order to refresh the heirloom item that has served faithfully for many years, it is advisable to use the material made by the injection method. It is also worth using a film of this configuration for gluing on surfaces that have protruding screws and rivets.

On stable areas without roughness and protrusions, you can stick a film made of metallized foil. In areas with frequent contact with other objects, in the children's room, this material is not appropriate to use. Otherwise, scratches and damage are inevitable.

Often, owners of old furniture have a desire to give it a new appeal. Such a desire can be realized with the help of self-adhesive film. This is the most popular way to decorate a variety of interior items with an already annoying appearance. But most people don't know how to glue the self-adhesive tape to furniture. Therefore, they cannot make their beautiful desires come true.

Using self-adhesive, you can change the look of not only any piece of furniture set, but the entrance or interior doors, window sill, various glass surfaces.

In this article, we will introduce you to some of the intricacies of choosing a self-adhesive film. With a number of its advantages. And also how to correctly stick it on any surface. This information will enable you to give new life various interior elements without special financial investments and physical costs.

Some advantages of using it

Self-adhesive decorative films have a number of obvious advantages over other types of decorative glued materials:

• good enough versatility;
• ease of fixation on various surfaces;
• do not require the involvement of a team of specialists for gluing it;
• provide an opportunity for a minimum period of time without problems to replace an accidentally damaged area;
• have a fairly good resistance to high humidity and sharp fluctuations in temperature;
• provide a rich assortment of textured designs from imitation natural wood and marble to a variety of geometric and abstraction patterns;
• have an easy-to-clean surface;
• have a fairly low cost.

You can learn more about the benefits from the video:

Several subtleties of choosing self-adhesive

Before sticking a self-adhesive film on any element of a furniture set or other interior item, you should take into account a number of criteria for its selection. These include:

• self-adhesive quality;
• the current state of the surfaces planned for pasting;
• aesthetic appeal of self-adhesive film;
• the possibility of accidental damage to the glued surface.

Tip: This film is ideal material for the restoration of both various elements of the furniture set, and other interior items. It can be easily glued to a variety of surfaces made of wood, ceramics, plastic, glass, plywood.

Variants of its application

Before purchasing self-adhesive, it is advisable to decide on functional purpose the surface on which it is planned to stick it. So the choice of design and color of such a decorative film largely depends on this.

If you want to give old furniture a more attractive look, then, as a rule, multi-colored self-adhesive parts or motley pictures are glued to it.

And if it is necessary to update the protective layer on it, then it is more rational to use a film that visually resembles the structure of natural wood in texture.

When planning the restoration of a furniture set in the living room or bedroom, it is advisable to select a self-adhesive with a pattern that most harmoniously suits general style the interior of the room.

Tip: Due to the easy removal of various types of dirt from the surface of the self-adhesive film and its rather good resistance to fluctuations in moisture and temperature, it is in great demand for decorating a kitchen apron.

Standard technology for decorating furniture with self-adhesive

Having familiarized themselves with its advantages and subtleties of selection, for many, the question remains - how to properly stick a self-adhesive film on a different surface.

Before gluing the film on furniture, you must have the following on hand:

• an ordinary wooden ruler;
• pencil;
• standard scissors;
• stationery knife;
• a piece soft tissue or a felt trowel.

Getting started with self-adhesive

To get acquainted with technological process Consider, for example, how to paste over a cabinet.

This is one of the main stages of the whole process. So the resulting appearance largely depends on the quality of its preparation. Therefore, the surface must be thoroughly cleaned of dust. Any dirt must be removed from it in good faith. If it has irregularities of a different nature, they need to be cleaned with fine sandpaper. As a result, the prepared surface should be perfectly flat and clean.

More details can be found in the video:

At the next stage, the side wooden surfaces of the cabinet must be primed. To do this, you can use a regular stationery or wallpaper glue... It is advisable to dilute it before applying it. big amount water. Working mixture must have a milk concession. This will make it possible to ensure a sufficiently good penetration of the prepared solution into wooden structure cabinet. And it will improve the adhesion of the pasted decorative film to the base surface.

Self-adhesive preparation

The cutting process of the self-adhesive film will be facilitated by a convenient scale printed on the protective paper on the back of the self-adhesive. Its grid is made with a gradation of 1 cm.Using a regular ruler or meter, determine dimensions glued surface.

Tip: If you are doing this work for the first time, it is advisable to add at least 1 cm to the length and width of the obtained measurement result. Since you are unlikely to be able to ensure a fairly accurate coincidence of the edges of the film and the decorated cabinet wall. On the already glued surface, you can easily cut off the protruding part of the film with a clerical knife.

Self-adhesive application on the surface

If you have to carry out such a procedure for the first time, then before starting work, it is advisable to familiarize yourself with the recommendations for performing this process. As a rule, manufacturers in an accessible form in the form of several pictures depicted on the protective paper layer explain its main stages.

For direct decoration of the cabinet with foil, carefully separate it in one of the corners small area self-adhesive from protective paper. Carefully glue the released section of the film to the corner of the cabinet wall. Now, over the entire width of the self-adhesive, separate the paper layer by 1-2 cm.Lightly press the second edge decorative material adhesive surface to another corner of the cabinet wall.

Tip: If your surface has significant dimensions, for example, more than 50 cm, then it is advisable to carefully "fix" the film in several places, evenly distributing them along the entire width of the furniture wall.

It is advisable to start "fastening" the self-adhesive from the place where it was first glued. Using a soft cloth or felt trowel, gently press the self-adhesive tape against the base surface. At the same time, make light circular movements with your hand. If folds or small air “bubbles” appear on the glued plane, then carefully “peel off” the film and apply it again.

Important: The adhesive layer retains its properties for 2 hours.

Having ensured high-quality fixation of the self-adhesive along the entire width of the wall, we begin to glue it in length. To do this, carefully separates the protective paper from the main decorating material in sections 2-3 cm wide.And making light circular movements with your hand, gradually press the film against base surface... At the same time, we periodically check that the pasted furniture wall had a perfectly flat and smooth plane.

After reviewing this information, we hope you understand how to glue the self-adhesive film on various surfaces.

In conclusion, we offer some tips for proper care of self-adhesive.

To remove various stains on it, just wipe it with water. Well, if the dirt could not be removed the first time, then you can use an alcohol solution or various detergent without "abrasive" inclusions. This can damage the glued surface.

After renovation works often there are finishing materials that are a pity to throw away. For example, wallpapers that are sold in large rolls, etc. How do I use them? You can glue them over cabinets, bedside tables, doors, and other furniture.

With this simple action, you will immediately kill two birds with one stone, use the remnants of the finishing material and decorate the old, well-worn furniture. To carry out such work, you do not need any special skills, but we will now tell you how to do this.

Bright accent in a calm kitchen

Wallpaper

You have probably heard more than once that wallpaper is used to decorate various interior items. How many master classes have you seen on TV from designers of all stripes, because each of them considers it their duty to give a second life to some household item.

This is done most often with high-quality vinyl or non-woven wallpaper, since it is extremely difficult to work with paper options, and you have to sweat a lot to get at least a satisfactory result.

Therefore, if you still have wallpaper, before you get involved in pasting surrounding objects, make sure of the quality of the finishing material.

The choice of color and texture is also limited with us, since we work with residual material, but if you want to buy a new roll for this purpose, then start from overall design rooms and their taste guidelines.

Decorating kitchen furniture wallpaper

It is quite acceptable to paste over furniture in the room with canvases with the same pattern as on the walls. Such an interior will look quite harmonious and holistic. If you need to use a different type of wallpaper, then do not forget about the general design concept of the room.

The use of simple design solutions will make the interior more harmonious. For example, if a room is decorated in light colors, then dark or bright options are good for pasting cabinets. If the walls in the room are pasted over with wallpaper with an ornament, then in order to avoid overloading the interior, the furniture is pasted over with plain canvases. It will look very cool interior decoration cabinet, made to match the walls of the room.

A good option for decorating cabinets, this is an imitation of other finishing materials, wood, brick, leather, stone. Such vinyl wallpaper is often used for decoration different rooms and they naturally remain. In addition, such canvases have significant relief and repetitive patterns, which will help to hide defects on the surface of the furniture.

Classic version cabinet decoration

In hardware stores, you can find special wallpaper designed for pasting doors and cabinets. Usually this paper options, which depict non-trivial plots, less often a banal imitation of a wooden covering.

In fact, the wood-like cabinet is easiest to paste over with self-adhesive film, which is just available in such colors. German and Dutch films are more expensive and of better quality, Chinese ones are cheaper, but this film often has edges that are not of the best quality.

Note that self-adhesive wallpaper can be plain, stained glass, if this option suits you, use it.

If you are going to paste over kitchen Cabinet or a bedside table in the corridor, it is desirable that the wallpaper is moisture resistant for holding wet cleaning... You need to think about this in advance. Self-adhesive film has moisture resistant qualities, like most vinyl wallpaper, but the paper is weak.

Using green and white colors that blend in with the interior

If you only have paper leftovers, in principle you can use them, but after pasting you will need to add gloss and protect the canvases from moisture.

We make pasting

We collect the necessary materials

Before starting work, you need to take care of the tools and material. Here's what comes in handy:

• sandpaper (sandpaper), the corresponding attachment for a drill or grinder, for preparing the surface for pasting;
• in some cases, a hair dryer, but not necessary;
• measuring instruments - ruler, tape measure, corner;
• tools for markings and marks - pencil, pen, marker;
• cutting tool - knife, scissors;
• wood primer and putty for preparatory work;
• tools for applying compounds - roller, brush, spatula;
• rags for smoothing and removing glue;
• pVA glue.

Using a grinder to sand surfaces

As you can see, the list is quite impressive. If you do not have any materials, buy them in addition. By the way, if the fittings of your furniture are worn out, then you can change it too. For example, a handle, a new cabinet handle will not be expensive, but will add color to your newly-made furniture.

Preparatory work

Before wallpapering furniture, you need to take care of the surface on which you will apply the material. We need to make it suitable for such work, so we will perform the following manipulations:

Typical domestic kitchen cabinet after decoration

• To make it easier to work with a wardrobe or bedside table, you need to disassemble it, remove all accessories from it.
• The next step is to sand decorative surface, remove the entire layer of varnish from it. This can be done with sandpaper, which is very laborious, it will be easier to put on a drill, grinder or screwdriver the appropriate nozzle and walk over the varnish.

You can also remove varnish with a construction hair dryer. For this, the surface is heated and the applied composition is scraped off with a spatula. But even in this case, sanding is indispensable.

• If your furniture is made of solid wood and has not been processed with anything, then it is recommended to go through with a zero sandpaper to create some roughness.
• In the next step, we remove all the dust from the skin, for which we use a damp cloth. We give the furniture some time to dry.
• After examining the dried surface for defects, we decide whether to putty it. If the cracks and grooves are not so large, and the wallpaper for pasting is embossed, you can skip this. If the defects are deep, you will have to level the surface with putty, maybe even in several layers.
• As you probably already guessed, after the putty dries, the putty places must be processed, level them with the general surface. This is done in the same way with sandpaper.
• Now the surface of the cabinet is almost ready, all that remains is to prime it for better adhesion to the wallpaper.

Carrying out preparatory work will provide 80% of success, even if you cannot glue the wallpaper beautifully the first time, you will already have a base for further experiments.

Pasting

Pasting of furniture also takes place in several stages:

Wallpapering furniture

• First of all, it is worth making blanks from the remains of wallpaper. For this, the item is carefully measured and the dimensions are transferred to the wallpaper. Some patterns are cut out in accordance with the dimensions of the cabinet or bedside table.
• Next, the prepared surfaces are coated with glue. You can use wallpaper glue, but it is better to use construction PVA, it will glue materials better. It is necessary to apply the cut pieces to the surface of the cabinet carefully, try to immediately level the canvas. This is not so difficult to do, since the patterns are small in size.
• It is recommended to stock up on plenty of dry rags or rags to smooth the sheets and remove glue residues from them. A special pressure roller will help to press the pieces more tightly.
• After pasting the cabinet or other furniture with wallpaper, it is necessary to give the glue some time to dry, and only then screw the fittings. Usually several hours are enough, but in the case of large-sized items, it may take a day.

As with standard wallpapering, try not to create indoors, there is some possibility that the sheets will not stick well.

The manifestation of imagination in the interior of the kitchen

Actually, that's the whole technology of decorating pieces of furniture with wallpaper. Definitely, after these manipulations, your wardrobe will look better, certainly more interesting than if you painted it.

You can glue the cabinets yourself, as you can see, there is nothing difficult here, it is enough to put a little effort, patience and accuracy. In addition, the restoration of such items with your own hands will give you self-confidence and confirm that you have design skills. Try it, maybe the world doesn't know the name of a new, successful designer yet.