How to remove moisture in the house folk remedies. Increased dampness of the room: reasons for the appearance and methods of struggle

For a comfortable stay in a residential area, you need not only to make high-quality repairs and tastefully place interior items. It is also necessary to maintain the necessary state of the internal environment, that is, the microclimate. Excessive moisture in an apartment, turning into dampness, can harm not only the people living in it, but also the furnishings and finishing materials.

Causes of high humidity

Allowable humidity indicators in residential premises should be in the range of 30 ... 60% (in accordance with GOST 30494 * 2011).

GOST in the current edition. Residential and public buildings. Indoor microclimate parameters. PDF file.

Before taking measures to eliminate dampness in the apartment, it is necessary to determine the reasons for its appearance. Otherwise, the measures taken may not have the desired effect.

In the vast majority of examples, an increased level of humidity in a home is caused by the following reasons:

The ventilation system must provide the supply of fresh air to the apartment, which is necessary to create a good microclimate, and the removal of polluted air. Periodic airing will not be able to fully cope with this task. The ventilation ducts can be blocked by the owners themselves, or the owners of other apartments are the culprits of the problem.

Often, it is impossible to quickly determine leaks in communications due to the installation of boxes that mask them. The neighbors living above can also fill in.

You can also determine the source of the problem by the location of the mold that has appeared. Biological damage spread over the entire wall in contact with the street signals poor thermal insulation. Mold in the upper part of the wall indicates the need to check the tightness of the interpanel seam.

If mold appears at the bottom of the walls in an apartment located on the ground floor, there is a possibility of poor waterproofing from moisture coming from the basement or mistakes in the foundation. Of course, the problem with this supporting structure is unlikely to be solved. But it is possible to significantly reduce the dampness caused by shortcomings in the isolation of the room from moisture penetration. To do this, it is recommended to tackle the installation of floor waterproofing. A lot of necessary materials are being produced today.

It will not be possible to solve the issue of moisture penetration from the roof by carrying out measures to waterproof the ceiling. It is necessary to repair the roof.

If the cause of dampness in the apartment is a leaking roof, flooding of the basement, poor thermal insulation or leaking seams between the panels, you must contact the management company.

The level of humidity in the apartment can be influenced by the laundry hung to dry, and the installed volumetric aquarium, and a large number of indoor plants, and the contents of the containers boiling on the stove. However, these factors have either a short-term or insignificant effect.

The source of the smell of dampness in the apartment can also be a washing machine. The reason is the clogging of some parts of the unit, long-term storage of dirty linen in the tub, dirt remaining on the bottom of the drum, etc.

Any of these problems can lead to dampness in a certain place in the apartment. Having found out the reason and taking timely measures to get rid of the misfortune, you can quickly eliminate the consequences to which this phenomenon leads, and restore the optimal indoor microclimate.

Interesting! Of course, a hygrometer helps to determine the value of humidity in the room. However, you can conduct an experiment by involving children in the event. To do this, you need a glass of water, which is placed in the refrigerator for a couple of hours (it is necessary for the water temperature to drop to 3 ... 5 degrees). After that, the vessel must be installed in a place where there are no devices that regulate the microclimate nearby. If, after ten minutes, dripping drops of condensation appear on the walls of the glass, the humidity in the room exceeds optimal values.

Factors that indicate a problem

It is possible to determine a significant excess of the humidity level in an apartment not only with the help of a special device, but also visually.

Pockets of mold and mildew appear on the ceiling or walls. Microorganisms multiply with lightning speed in a confined space when the moisture content in the air exceeds 70% and the ambient temperature is more than 18 degrees.

Symptoms of dampness are also problems with the state of the finish: plaster can collapse, wood materials rot or wallpaper may fall behind the walls.

Condensation appears on plastic windows. The reason can be both a factory defect in structures, and problems with the microclimate in the apartment.

In addition to the listed problems from dampness in the room, an unpleasant smell will also provide discomfort for those in the apartment, which cannot be eliminated with the help of any air fresheners.

What does dampness in the room affect?

As already noted, high humidity leads to deterioration of finishing materials and interior items. Products made of paper, wood or leather are particularly affected. Even door blocks can deform, paintings and books become unusable. All this leads to the need for repair work.

But the most important thing is that dampness can cause irreparable harm to the health of households. Young children and elderly residents are at greatest risk. Spores of harmful microorganisms lead to exacerbation of chronic diseases. Once in the respiratory system, they cause allergic reactions.

More often, apartment residents suffer from colds, and they occur in a more acute form. Damp textiles in contact with the body contribute to the development of rheumatism.

It becomes uncomfortable to be near the apartment. People have a decrease in concentration, fatigue appears, and problems with performance arise. The unpleasant smell coming from the clothes also does not add positive emotions. Finally, the shelf life of food is reduced.

How to deal with dampness

Having diagnosed the problem that has appeared, it is necessary to immediately begin to eliminate the cause of the resulting dampness. If you can eliminate the source of danger on your own, repair work should be done. Otherwise, you need to contact the management company to solve problems with waterproofing, insulation and ventilation of the home.

You also need to follow simple rules to maintain an optimal microclimate. It is important to periodically ventilate the room, as dampness does not tolerate fresh air.

You should not install an excessive number of indoor flowers in the room, watering which also leads to a violation of the microclimate indicators.

The room most susceptible to dampness in the apartment is the bathroom. To prevent this from happening, you need:

Important! Disinfectant should be applied before sealing joints.

Technique for moisture reduction

Dehumidifiers help remove excess moisture from the surrounding air. The devices have a different principle of operation, power and performance. They are floor-mounted, table-top or wall-mounted. For domestic use, models are suitable that can extract from 10 to 20 liters of moisture from the air per day. It is more convenient if the device is equipped with a built-in sensor that allows you to adjust the humidity in the room in automatic mode.

Prices for a range of air dryers

In the kitchen, where intensive steam generation takes place, one cannot do without forced ventilation, for which they are installed there. The most in demand is equipment with a capacity of 400 ... 600 m 3 / h.

High humidity problems can sometimes be solved with an installation. Poor heating during the cold season often leads to dampness.

Prices for various types of heaters

Heater

After the cause of the dampness is found and eliminated, it is necessary to take measures to eliminate mold and mildew. Masking the problem area with the help of finishing is not enough. Dangerous microorganisms must be eliminated completely.

Removing mold on walls, floors and ceilings

Getting rid of mold that has appeared is not easy.

Work technology.

Step 1.The foci of biodefeats in the apartment are determined. It is important to provide access to all problem areas: move interior items, remove carpets or curtains, etc.

Thermal imagers prices

Thermal imager

Step 2.During the event, it is necessary to use protective equipment, since many compounds are quite poisonous: gloves, respirators and goggles.

Step 3.A colony of microorganisms is eliminated with a coarse brush. To get to the base, you often have to remove the finishing material: wallpaper, plaster, drywall, etc. Moreover, it is necessary to clear a site larger in area so that it is possible to kill spores that did not have time to manifest.

Step 4.The contaminated area and the area around it are treated with fungicides or antiseptics, which are presented today in a large assortment. The compositions are applied with a roller, brush or spray gun. Reapplication may be required depending on the manufacturer's recommendations. After that, the surface should dry.

Prices for different types of Pufas mold protection

Mold protection Pufas

Step 5.The treated area is primed before finishing finishing works. To do this, you must wait until the base is completely dry.

Table. Chemicals for removing mold and mildew.

Name	Purpose	Application
	Means for removing green plaque and mold from walls and ceilings, as well as for prevention.	It is used for surface treatment inside and outside buildings. Consumption: 50 ... 100 ml / sq.m.
"Element T-0" ("Alp")	The chlorine-free formulation is suitable for the elimination and prevention of bio-damage (as a protective measure).	It is used for treatment against mold and mildew on various bases: concrete, brick, stone, wood, plasterboard, plaster. Consumption: 1 liter per approx. 10 m2 of surface.
	An effective preparation for treating surfaces from mold and mildew in rooms with high humidity.	The product with a pungent odor is applied with a spray bottle. After application, after 10 ... 30 minutes, the base must be washed.
	The chlorine composition is intended for the elimination of various types of biological damage from internal and external surfaces.	Before use, the concentrate must be diluted with water (1: 1). Substrates and coatings for processing: concrete, tiles, plastic, wood, wallpaper, drywall, paint, stone, etc. Consumption: 1 liter per 15 sq.m.
"Mold remover" (Neomid)	Quick removal of mold from mineral surfaces.	The composition is diluted with water (1: 1), applied with a roller or brush on the surface for about 0.5 hours. The package is sufficient for processing 20 sq.m. grounds.

For the treatment of the surfaces of the walls and ceiling, as well as for the elimination of traces of biological damage from interior items, you can also use folk recipes:

Important! The use of folk remedies, as a rule, involves repeated processing of the contaminated surface.

The smell of dampness absorbed by the bases and furniture can be eliminated with soda. It is necessary to prepare a mixture from it, the consistency of which resembles sour cream. You can remove the composition from the surface a couple of hours after application using a vacuum cleaner.

Dampness in an apartment can not only damage the environment and nullify all efforts to improve the premises, but also harm the health of household members. It is important to remember that the sooner work begins to remove mold, the more effective it is.

Video - How to get rid of fungus in the house and apartment

It is uncomfortable and sometimes dangerous to live in an apartment with high humidity. In such rooms, a fungus appears on the walls, causing allergic reactions. This microclimate leads to health problems. In the humid air, joints begin to ache, suffer from constant colds, insomnia begins, chronic nasal congestion, general weakness and other unpleasant symptoms appear.

Danger of raw air

The optimum humidity in a residential area is 45-60%. In winter, when the central heating batteries are working, the air in the apartment becomes drier. For human health, both an excessively high content of water vapor and excessive dryness are equally dangerous.

Most often, drying clothes on batteries and poor ventilation lead to an increase in humidity in an apartment.

If the air is often damp, sooner or later dampness will appear, from which interior items will suffer, furniture and leather upholstery will deteriorate, plaster will crumble, wallpaper will peel off, the wooden floor will deform. Books and documents deteriorate in a damp apartment, food quickly molds. But the worst consequence of dampness is mold and mildew that appear in the corners of the apartment. These microorganisms can ruin health and quickly render housing unusable, especially if the walls are made of wood.

In a damp apartment, the general condition of the body worsens. Excessively humid air is the cause of increased oily skin, greasy hair, skin rashes and allergies. People living in damp areas are prone to lung disease, chronic bronchitis and other respiratory problems. Excessively humid air is heavy, the room smells bad, which makes living in it unpleasant. Any bacteria grow rapidly in a damp atmosphere, so residents are susceptible to dangerous infectious diseases, including tuberculosis.

The reasons for the appearance of dampness in the apartment

Dampness in the room can appear for internal and external reasons. A little experiment is enough to determine where the moisture comes from - from the outside or from the inside. Glass is applied to the wall facing the street for several hours. If an enclosed area becomes damp, it means that dampness is entering the room from the outside. This is especially common in corner apartments or in houses, during the construction of which waterproofing standards are violated.

If the part of the wall covered with glass turned out to be dry after a few hours, you need to look for the causes of dampness inside the room. It can be:

on the ground floor in a house with a basement - rising groundwater or technogenic flooding of the basement;
poor ventilation or lack of it - this happens when neighbors close the ventilation shaft;
leaking plumbing, for example, the bath does not fit tightly to the wall and while taking a shower, water penetrates the floor, accumulating in puddles under the bath;
drying a large amount of linen in the apartment, which happens when the family has a small child or a bedridden patient;
hobby for houseplants - any indoor flower evaporates water with leaves and affects the microclimate in the apartment.

Sources of internal humidity on the 1st floor or any other, as well as in a private house without a basement, can be:

frequent showering or bathing;
daily wash;
cooking food;
breathing and evaporation of moisture through the skin;
the presence of aquariums in the apartment.

Microclimate correction

It is estimated that as a result of the economic activities of a family of 3, up to 100 liters of water are released into the air every week. It is not surprising that in apartments with sealed plastic windows and poor ventilation, the microclimate changes so much that the walls begin to damp, and black mold appears in the corners.

To reduce the humidity in the apartment, the first step is to check the operation of ventilation and the tightness of the heating and water pipes. If something is wrong with these systems, you will have to contact a specialist. If the ventilation and pipes function flawlessly, the humidity can be lowered in the following ways:

1. Ventilate the room regularly - just open the vents wide for at least 10 minutes and the damp air will go away.
2. The bathroom door should be left open at night.

Residents of megalopolises can turn on the air conditioner instead of airing. This will help get rid of dampness in the apartment and prevent gas pollution.

An alpine vent (supply valve) will help to dry the air. The device provides fresh air to the apartment even in winter. An alpine vent is necessary in a room with poor gas exchange. To install the system, you will have to make a hole in the outer wall. It is covered with heat and sound insulating material. You can regulate the level of fresh air entering the apartment using a damper. The exhaust air leaves the room through natural ventilation. Alpine vents are installed over the windows. The device is not suitable for airing bathrooms, kitchens and toilets - these rooms need forced ventilation.

Alpine window device

Alpine window - exterior and interior

The air conditioner effectively reduces humidity and removes the smell of dampness. The device has a dehumidification function. You can simply use it as a hairdryer for the room air, turning it on to the appropriate mode. But even during normal operation, the air conditioner slightly dries the room.

A high-quality antiseptic will help remove fungus and mold that have appeared on the ceiling and in the upper corners after the next flood. These products are sold at hardware stores.

The room, heavily affected by the fungus, needs renovation. Wallpaper is being removed from the walls. Sometimes you even have to remove the plaster. All surfaces are treated with an antiseptic and cleaned of mold and mildew. Severely affected areas of the walls can be smeared with creosote. After applying the impregnation, the walls and ceiling must dry completely, only then they can be finished. It is better to use wood and drywall for decoration. These materials absorb water when the air is too humid, and emit it in a dry atmosphere.

In winter, the room becomes damp due to the cold. To lower the humidity, it is enough to use electric heaters until the central heating is turned on. They will warm the room and dry the air. Chemicals for drying apartments are also produced. For example, Henkel implements the Stop Moisture system, which includes an absorbent and an absorbent. Atmospheric moisture is absorbed by the absorber and enters a special container, from where it can simply be poured into the sewer.

High humidity in the house can be caused by various reasons. Almost every second apartment and private house owner is faced with this phenomenon. Moisture causes mold.

Therefore, it is imperative to fight with excess moisture in the house. The source that causes this phenomenon should be found and appropriate measures taken. It is worth saying that fungus and mold appear in the house precisely because of the high humidity. In addition, dampness worsens the health of all residents living in the house. Therefore, today the portal will tell you how to get rid of dampness in the house with folk remedies?

Why does dampness appear in the house

The cause of dampness is directly sought on the territory of the house itself. To quickly get rid of dampness in the house, you need to find a place for the accumulation of mold, and only then think about what you can do in such a situation. If a wall facing the street is exposed to increased dampness, then it must be covered with a reliable insulating material. Mold isn't just found in private homes. Mold often occurs in modern apartments. This problem worries very seriously the owners of apartments on the first floor. Typically, in such rooms, mold forms at the bottom of the walls. This is facilitated by a number of unpleasant reasons. This could be:

Poor insulation of the foundation with the wall.
A damp basement with constantly leaking pipes.
Poor ventilation.

It is worth saying that it is much easier to eliminate dampness in a private house. After all, you just need to organize proper ventilation or install thermal insulation materials. It is very difficult to combat this phenomenon in apartment buildings. Here, the main reasons for the appearance of this factor are hidden in the first stages of construction. And if the developer misses important points, then the apartment will always bring unpleasant problems to its owners. Moreover, being in this room will adversely affect the health of all household members. People who are constantly in an apartment with high humidity can get sick: asthma, tuberculosis and other more serious diseases.

What methods will help get rid of dampness in a private house

Now it's time to understand what to do with dampness at home and how to get rid of this unpleasant phenomenon in your home. Dampness in the house must be fought without fail.

In this case, you need to use all modern methods.

So, a special product that can be purchased at any supermarket will help get rid of mold and dampness in the house. However, this remedy may seem ineffective if mold is caused by other factors. For example, the use of special tools will be useless if the house has problems with ventilation or ventilation. If the wrong construction of the building was carried out, then the tool also cannot bring the effect. After all, you need to fight the main causes of mold.
Mold on the walls in your home can form due to poor heating. Indeed, block walls are capable of letting in cold. In addition, they are filled with bulky furniture that does not allow heat to pass through. All these reasons contribute to the formation of mold, which for years releases dampness and unpleasant substances into the air of the room. Some people find it very easy to solve such problems with a special tool from the supermarket. However, it is not. This will require drastic methods. Even an air conditioner will not bring the desired effect, which will simply drive damp air around the apartment. But there is no need to despair! After all, if the house is constantly damp, you just need to install plastic windows that will not have partitions. The window will allow natural light to constantly enter the house. In addition, with such an item, you can carry out high-quality and constant airing of the room.
It is very difficult to fight mold. And every homeowner with such an unpleasant problem should remember this. In this case, it will take not only patience, but also a lot of effort. To make your family nest comfortable and cozy, you need to remove fungus and mold from the walls of the house. For such work, you will need to purchase a high-quality antiseptic that will clean the walls from fungus and make them aesthetic again.
If the walls of the house are covered with wallpaper, then they are removed. In addition, the plaster affected by the fungus is removed. In order not to harm your health, all work must be done in a mask. Before being treated with an antiseptic, the walls must be cleaned of mold and mildew. Only then can they be treated with an antiseptic and creosote. Other compounds are allowed to be used for wall treatment. For example, you can dilute office glue with water in a ratio of 1: 4. It is allowed to process the walls with urea. All of the above products should be applied only to the affected areas of the walls. Before applying, the affected areas on the walls must be heated to 50 degrees. After finishing work, the walls must dry completely.

How to get rid of dampness in the apartment and in the house? This question will be relevant at any time. It was said above that this process is difficult and painstaking. In addition, after removing mold in the room, it is necessary to create special conditions that will prevent the formation of mold and increased dampness.

High humidity in the house: methods of struggle, causes

So, sunlight and fresh air will help prevent the appearance of mold and dampness in the apartment. In addition, you need to not force all the walls in the room with furniture. Some plants can increase humidity in rooms. Therefore, it is necessary to remove from the room where there is high humidity: geranium and violet. If a normal level of humidity is observed in the dwelling, then mold and mildew can be forgotten for a long time. Experts do not recommend drying damp laundry in an apartment or house. In addition, dry building mixtures must be purchased for repairs.

A good effect can be given by the insulation of facades with the help of insulation or foam. Dampness in an apartment is quite common. Therefore, everyone should know how to get rid of this phenomenon. In a room with high humidity, there should be normal air circulation.

Therefore, it is better to keep the interior doors open. But the doors to the kitchen should be closed during cooking. In this case, it is recommended to use an extractor hood and vents to ventilate the kitchen.

For high-quality ventilation of the bathroom and toilet, you need to equip good ventilation. There is no need to invent something new and look for expensive solutions.

conclusions

To maintain good health and well-being, it is imperative to remove mold, mildew and high humidity from the rooms. In addition, you need to monitor the condition of your home and prevent this problem from appearing. For example, if an apartment or house is equipped with low-quality heating, then you need to purchase a heating convector that will dry the walls with warm air. During wet cleaning, you should wipe the floor well and monitor the condition of the walls, on which the appearance of the fungus has already been recorded.

If all the methods to combat the fungus have already been tried, if there is no good result, or there is no time at all to deal with such problems, you need to contact a special company that will send competent employees to deal with this problem.

Quite often, the owners of apartments and private houses have to deal with the appearance of mold. Therefore, they want to find the most effective ways to remove fungus at home. In this article, we will tell our readers about what types of fungi can grow in a dwelling, about the reasons for their formation, how to get rid of dampness in the house and what tools are best for such purposes.

So how do you deal with mold in your home? If you notice white formations in the corners or on the walls that look like cotton or fluff, you should immediately find the cause of the development of microorganisms. Ignoring this sign, it will be possible after a while to see how gray, yellowish, purple or pink shades appear on the surface. In the future, it will be very difficult to get rid of such mold.

There are several types of mold in your home.

White house mushroom actively destroys the structure of wood. It is able to change color, create cracks, drying out the base.

Blue fungi. This variety is also often found on wood. Microorganisms can destroy even the structure of dense coatings that are applied to the surface of wooden products - varnish, paint. After that, moisture will penetrate into the product itself. The colony of these fungi has a bluish gray tint.

Rotting fungus. This variety can be dry or wet.

The wet type will actively attack wood that is usually near the ground, sewers, or drainage pipes. Such areas quickly become loose and rotten, on which dark elements appear.

Dry fungus grows on walls and corners due to high humidity. Reddish pollen will appear on the surface. The gray stripes will destroy the tree.

There is also black and white mold. It appears not only on wood, but on almost any surface - stone, tiles, plastic, tiles, glass.

Actinomycetes are spores that soften wood and cellulose fibers. For several years, this type of fungus can destroy the structure.

In addition to the fact that these pathogenic microorganisms are capable of destroying many different materials, they also negatively affect the health of humans or animals. It is for this reason that you need to know how to get rid of mold in your home. However, before removing the fungus, you need to find out the reason for its appearance. This will prevent further appearance of the mold after removing the mold.

Video "Fighting dampness"

From the video you will learn how to deal with such an unpleasant phenomenon as mold.

Reasons for the appearance

First of all, the owners should be aware of how the fungus appears in the house. Knowing the real causes of this problem, you can speed up the cleaning process of any surface, as well as prevent the appearance of pathogenic microorganisms in advance.

The main reason for the signs of mold is dampness in the house. It is very difficult to fight the fungus, since its spores are found almost everywhere, and spread very quickly. As soon as favorable conditions appear for the development of microorganisms, mold will begin to grow on any surface: on the foundation, wood, plastic, tiles, wallpaper. Fungus on the walls and ceiling is a frequent occurrence if the microclimate is disturbed in living quarters.

In rooms where moisture constantly accumulates and does not have time to dry out, a fungus will almost always appear. In wooden houses, this can be a very big problem, since the roof and base in them are made of wooden beams. If mold has started up there, then over time it can disrupt its structure, which will lead to deformation of the main parts of the building. Therefore, you need to quickly get rid of the colony of microorganisms.

The floor covering damp very quickly, as well as the walls. Usually, dampness in the house is often observed in the lower levels. If this is a multi-storey building, then on the first two floors.

Such places are a very favorable environment for the development of colonies of fungi and toxic spores.

There is another reason why dampness appears - the absence or poor ventilation of the room. Indoor plants are often planted in small rooms, which require constant maintenance and watering. If there is no access to sunlight or the room is not regularly ventilated, then the appearance of mold will not keep you waiting. Hosts can also misuse humidifiers. That is why mold appears on the walls in the house.

Dealing with mold in your home can be a huge challenge as spores will remain indoors all the time. To effectively destroy such microflora, you should know how to get rid of dampness in the house.

How to get rid of a wooden house under the floor?

For any surfaces or products that are made of wood, the appearance of fungus can be detrimental. How to get rid of dampness in a house if it contains a lot of wooden elements?

Before looking for ways to kill mold, you need to determine the cause of mold formation. In a new wooden house, mold does not appear immediately, since the material itself for construction is used exclusively dry, and is also treated with special solutions and impregnation. This reliably protects the structure from mechanical damage and the effects of microorganisms. However, if you see raw material (for example, in an old attic or cellar).

So how do you remove mold from wood surfaces? Only by eliminating the real cause of its appearance, it will be possible to completely remove mold from walls, ceilings or any other surface. Otherwise, the owners will encounter it over and over again (possibly in new places).

Wet cleaning in this case will not be a sufficient measure. Removing visible and dirty areas does not guarantee 100% results.

The first step is to remove plaque that is on the surface. Some places may require brute force. For example, if the wood is completely rotten, then it must be removed with a plane or ax. Items that cannot be cleaned should be thrown away and then taken out of the house. It is highly recommended to remove the soil under the floor covering. If the fungus was found on the walls or floor, then this may indicate that the ground under the house is infected with spores. How to remove mold in this case? To clean the area, you will need to treat it with a special solution. You can use dry clay, limestone, cement and gravel (it can be replaced with expanded clay).

It is very important to provide good ventilation in this area.

Solutions for wood processing

How to get rid of fungus in the house using special tools? You can clean and process wood using an antiseptic primer. It is considered the most effective drug among all drugs. The primer actively destroys spores and microorganisms, and prevents the appearance of new lesions. Such a drug has an affordable price.

The cleaned area must be provided with regular ventilation for several days.

You can clean up mold in your home with bleach as it helps get rid of organics and spores. Bleach can be substituted for vinegar.

Areas with fungus can be cleaned with baking soda, ammonia, sodium fluoride. First, thoroughly rinse the surface, dry it, and then treat it with the selected agent.

If you know that dampness in your house periodically appears in a certain season, then you should know in advance how to get rid of it and the possible consequences.

How to get rid of the floor in a private house

How to get rid of dampness in a private house if mold has appeared on the floor?

The destruction of mold in a private house requires more time than this procedure would take in an apartment. Usually, in such a situation, there is much more territory for inspection and search for signs of mold.

If you find signs of mold or mildew on the floor, you can use one of the special preparations or strong active agents.

People have long noticed that there are rooms in which a person feels worse than usual. Some people notice that they feel uncomfortable when they come to visit, move to a new apartment. Often the air we are forced to breathe is to blame for the deterioration of health. If, you notice that there is high humidity in your apartment, a fungus has appeared on the walls, it's time to think about how to remove moisture from the apartment. After all, the "wrong" microclimate at home causes a number of unpleasant symptoms - nasal congestion, insomnia, sneezing, general weakness, pain in the joints.

Standard humidity in housing

In a living room, the optimum humidity is 60%. You can measure this indicator using a hygrometer. A decrease in air humidity in the summer months to 45% is allowed. The human body is adversely affected by both excessively dry and too humid air. Those who like to turn on the air conditioner should be especially careful. This device has the ability to "take" water from the room and reduce the level of humidity in the room.

If you dry clothes in the house, do not ventilate the apartment well, the air can be very humid. High humidity provokes the formation of fungus.

to the table of contents

Why you need to reduce the humidity in the apartment

Once in the human lungs, mold contributes to the development of allergic rhinitis and bronchial asthma. If a person often stays in conditions of high humidity, it is quite possible that he will more often experience migraines, runny nose, and disrupt the work of the cardiovascular system.

The lifestyle of a modern person contributes to the level of humidity in his home. If before people took a bath about once a week, today they take a shower twice a day, wash their clothes often, etc.

to the table of contents

Sources of humidity in the apartment:

Human breathing through the surface of the skin and lungs;
Taking a bath or shower;
Washing and drying clothes;
Plants, aquariums;
Cooking food;
External atmosphere;
Excess groundwater;

How to lower the humidity in the apartment?

In a family of three, the volume of half a bath is released into the air weekly. This is about 70-100 liters.

Moisture is the main factor in the formation of mold. To successfully combat this, you need to find out the cause of the moisture.

to the table of contents

Find the cause and eliminate

If the humidity in your home is temporary, such as when you cook food, it can be removed by ventilating the room or using heating appliances. Your main task is to thoroughly ventilate the room. If the moisture is concentrated on the walls, the air flow should be significant. Arrange a draft for several hours, or even better - for several days.

If your room lacks sunlight and heat, this can also cause increased humidity. To lower the humidity in the room, you need to use heaters that can heat the entire room.

In addition, the poor condition of the ceiling can be the cause of high humidity in the apartment. Dehumidification of this part of the room is a rather complicated process. You can simply additionally plaster the room. It is better to wait for the plaster to dry completely without furniture. It absorbs moisture, and then begins to give it away, which can cause another increase in humidity.

Hermetically sealed windows (eg PVC) often cause additional moisture. After all, in many apartments they become a barrier between the street and the room. It is better to immediately order frames with a well-thought-out ventilation system.

It is necessary to remember how to reduce the humidity in the apartment even at the stage of repair work. All plaster compounds contain water, so it is very important to thoroughly dry the room. This will prevent condensation from forming.

You can lower the humidity in the apartment with the help of modern chemicals. For example, Henkel has developed a new product that helps in the fight against excess moisture called Stop Moisture. It is a system that includes an absorbent and an absorbent. Active crystals fight the formation of excess moisture. The moisture is collected in special containers.