Fences and material on them. Fence material - comparative characteristics and useful recommendations

The first question that arises before the owner, who decides to enclose his site, is what material to choose for the fence. Indeed, there are many options, it is difficult to choose the best one for yourself. We have collected the most popular fencing materials today.

Decking

If the task is to make a blank fence and securely hide the site from prying eyes, then corrugated board has no competitors in terms of popularity. This is explained simply - this material is the cheapest. Yes, and mounting a fence from corrugated board with your own hands is simple.

This material has disadvantages, we do not argue. The corrugated board can be wrinkled upon impact, if it is fixed on self-tapping screws, they can loosen over time, there is a risk that the sheets will be unscrewed and stolen, and during the wind the metal sheet can make unpleasant sounds.

However, a large selection of colors, the ability to choose corrugated wood or stone, ease of installation and maintenance, durability and acceptable price make this material a leader in the construction of blind fences.

Tree

The main competitor of corrugated board, while completely unsurpassed by it. Wood is an affordable material that allows you to experiment with fences. You can make a wooden fence whatever you like - low and high, deaf and with gaps, carved and massive, paint it in any color. In addition, if the house on the site is wooden, the same fence will create a harmonious picture.

Of the minuses - flame retardant treatment is desirable, because the tree burns perfectly, you will have to regularly care for it, renew the paint, and wood does not last as long as metal. However, repairing a wooden fence is not so difficult.

Concrete

Concrete fences attract homeowners with their reliability, durability, variety of shapes. A simple gray fence can be painted, choose a fence to your liking. look after concrete fence it is not particularly necessary, however, during installation, more effort will be required - the fence is heavy.

Rabitz

Inexpensive fencing, which is often used on summer cottages. The main disadvantage is that it does not hide anything, it simply marks the boundaries and does not allow neighbors' animals to enter the site. Chain-link mesh is in demand due to ease of installation and low cost.

Brick

Already more expensive, but popular fence material. Brick fences have a number of advantages, including giving the site a well-groomed appearance, they look attractive, one might say, elite, they are distinguished by a variety of colors and shapes.

Build brick fence more difficult than mounting corrugated board or ready-made concrete sections. But on the other hand, the fence will last a long time, if necessary, it must be repaired.

Forging

Forged fences are always beautiful, elegant, openwork. Yes, they do not hide the plot, but they look very elite and attractive. In addition, it is easy to mount ready-made factory sections. Minus - cost forged fences a lot, especially if they differ complex shape. But they last a long time.

Polycarbonate

Polycarbonate fences themselves can look unreliable, too simple and unattractive. But if polycarbonate is combined in a fence with forging or chain-link mesh - a completely different matter! This version of the fence is now quite popular due to the excellent result, durability and ease of installation.

We repeat - we have chosen only the most popular materials for fences today. The choice is actually wider. You can use gabions, hedges, polyvinyl chloride (PVC), which is only gaining popularity, braided branches, a natural stone even plastic bottles.

Any construction or manufacturing of something begins with the choice of materials - the first question that arises in a person is what to build from. No exception in this regard is such a structure as a fence in the country - the whole thing is aggravated by a huge selection of different building materials. They will be discussed in this article - together with the website, we will study the materials for the fence and get acquainted with their features. Based on the information received, you can quite simply solve the question of what to build a country fence from?

Types of materials for photo fence

Fence materials: combined fence supports

It just so happened that combined fences made from diverse materials look more attractive - moreover, this approach to business allows you to change the properties of the structure as a whole and reduce or increase its cost. All in all, right choice material for separate parts buildings are not only cost savings, but also the reliability of the fence. First of all, support posts are responsible for the reliability and durability of the dacha fence, which can be made from the following materials.

As an option, you can consider concrete supports, which are mainly used in tandem with concrete spans (euro fence), and a decorative cinder block may also be a good option, under which, like under a stone, you will need to pour a foundation. About Options self construction at the cottage, see this video.

Materials for fences and fences: what to make sections from

Fence sections can be made from the same material as the supports, or from a different material. Naturally, not in all cases - for example, if the supports can be made from pipes, then sections of them will not look very good. This approach to business is acceptable only for brick, stone and other block posts for a fence - if sections are made from them, then the fence turns out to be very durable and attractive. In all other situations, again, you have to resort to combining - by the way, sections of other materials can also be made for stone and block fences. They look very attractive.

Alternatively, you can view other types of materials for fences - for example, brick or stone columns of sections welded from a square bar and diluted with forging elements will perfectly complement. Quite simply, cheaply and angrily, a mesh fence is made - in general, one might say, the most cheap material for a fence. Metal tubular racks, on which a chain-link mesh is stretched, do not obscure the garden and block the way for strangers.

cheap photo fence material

New fence materials: ready-made solutions

In addition to the approach described above to the manufacture of country fence, there is another option - it consists in acquiring a finished fence. This is a kind of constructor, consisting of supports and spans, the main advantage of which is a simple (if not elementary) assembly. There are a lot of designers of such a plan today, but only a few can be distinguished among the inexpensive and most common options.

These are not the only options ready-made solutions- besides them, there are other options for fences. For example, it is difficult to ignore a metal picket fence or a finished forged sectional fence. In general, there are plenty of options, and among all this assortment, it remains only to give preference to one of them.

I agree, it is difficult and it is for this reason that you should ask yourself a couple of leading questions. First, what do you want to see in your country house (reliable or decorative). Secondly, how long do you want to see her. And, thirdly, do you have enough money to purchase this or that material for the fence - you may have to be content with improvised materials, which is also very good. Showing your creative possibilities, from what is at hand, you can assemble a very good and strong fence for giving.

It would seem that the project has only recently started, and the final is just around the corner - all the rough work has been completed, the house is almost ready to receive residents. All the details of this large-scale and interesting project can be found in, and we will consider one of milestones arrangement of the adjacent area - the construction of a fence. As part of this master class, professionals will tell you what to look for when choosing a fence, share installation technology and answer questions from our users.

The article was written with the participation of the company's specialists.

• How to choose a fence
• Fence technology.
• Answers of the specialist to the questions of the users of the portal.

What to look for when choosing a fence

A fence is a functional and decorative structure, the main task of which is to protect the site from unauthorized visits. Secondary - to become an ornament of this very site, organically fit into the landscape design, at least not spoil the view. Considering that country estates are often located near towns and villages, and sometimes even within their boundaries, the fence should protect not only from unwanted visitors. These are neighbor dogs, and larger living creatures, therefore, the fence must be both decorative and strong enough. All existing varieties It is difficult to list the fences, since people have a rich imagination, the possibilities are different, and the market offers "any whim for your money." But you can classify fences according to the material used between the supports.

The most popular types of fences:

• from corrugated board;
• from eurostudent (metal fence);
• from a chain-link mesh;
• from wood.

There are also so-called combined fences. These are those fences in which two or more of the above types are present.

To summarize them, there is one similarity - they are all installed on metal supports(pillars). For fences made of corrugated board, wood and eurostudent, square posts 60x60 with a wall thickness of 2 mm are used, and posts are used to install a chain-link mesh rectangular section 60x40 mm, also with a wall of 2 mm. Since a chain-link fence is the lightest in weight, and it is not affected by wind load and many other factors at all, larger supports are not used.

The installation depth of the pillars and its technology depends on several factors.

The main ones are:

• soil type;
• freezing depth.

In most cases, the installation of poles at 1.2 m is used according to the driving method with preliminary drilling of a guide hole. If you decide to resort to concreting pillars, then you should remember about the depth of freezing. Concreting must be below the freezing level, otherwise such supports will be squeezed out.

So, you have decided on the type of fence, with the technology for installing supports, and it seems to you that all that remains is to buy the required material, and you can proceed. This is not entirely true. There are nuances that you also need to know about when choosing a particular material. For example, the metal walls of the main supports must be at least 2 mm thick, and the gate posts and gates must be at least 3 mm thick. In the event that the thickness of the metal of the supports is less, such structures are called times. This is very easy to check with an electronic micrometer. Sellers who value their name themselves offer the service of measuring the material before purchase or installation. If, nevertheless, you have purchased a material with a thickness of less than 2 and 3 mm, then do not be surprised if the poles are already deformed during installation. Such structures can be safely called temporary.

It is worth mentioning the fences on monolithic strip foundation. This is a separate category concrete foundation at the base of the structure. Very often, supports on such fences are decorated with bricks, stone tiles, etc. You can also say that this is the most durable design, but also the most expensive. Between the pillars, as a rule, the same corrugated board, eurostudent, wood or forging is installed.

When the site is not six acres or even twelve, but much larger, and the length of the fence is measured in hundreds of meters, as a rule, the front part is made decorative, and the remaining perimeter is closed with a slightly more budgetary option.

Less popular are:

• forged fences;
• 3D fences.

When they are guided mainly by taste preferences, the general style of the design of the site and financial capabilities, but other factors are also important:

• soil features - soil composition, level ground water;
• climatic conditions - freezing level, wind load, amount of precipitation, temperature regime;
• features of the relief of the site - the presence of significant level differences;
• blowing - a non-deaf fence (visible).

If, nevertheless, you are lucky with soils, and with a flat area, and with a mild climate, your own needs come to the fore.

The choice of material is often based on the needs of the client:

• It is necessary to close - corrugated board will do.
• Make a ventilated and at the same time impenetrable fence - a picket fence in a "chessboard" order.
• You just need to designate the territory - a chain-link mesh is the best option.
• Preference for the classics - a lot of options made of wood.

It is impossible to say which of the fences is the best, there are too many variables, different configurations have both advantages and certain disadvantages. Even the most popular

Representative of MASTEROVIT

It is very difficult to single out one thing, all types of fences solve their task, and certain costs are required to complete it. A fence made of corrugated board stands out against the general background, because most people want not only to mark their territory, but also to close themselves from the bustle of the city and prying eyes. These fences reduce the level of noise, dust ingress into the area, but also have their negative sides.

Fence installation technology according to the project

For the house being built according to the project, a "classic of the genre" was chosen - a "horizontal checkerboard" on square posts (60 × 60 × 2 mm), with wooden supporting logs made of timber (100 × 50 mm) and wooden picket fence(100×18 mm) to fill spans. This option is also quite popular with homeowners, consider the main aspects of installing such a fence.

Preparation

Regardless of whether professionals will mount the fence, or whether it is own hands and comrades, after the construct is determined, the turn of preparation comes:

• Measurements - with a tape measure and by means of a level for measuring elevation differences.
• The choice of a place for the entrance group - a separate or built-in gate, swing or sliding gates.
• Marking (setting reference points) of corner posts.
• Determining the type of soil and the proximity of groundwater

materials

The durability and strength of the fence directly depends on the thickness of the steel.

Representative of MASTEROVIT

Before buying, be sure to check its thickness with an electronic micrometer. Neglecting to measure metal thickness with an electronic micrometer is equivalent to buying products by weight without looking at the scales. If you do not compare the parameters when receiving the metal, you run the risk of purchasing a product at an overpriced price and with understated characteristics, which will subsequently affect the quality and durability of your fence.

Equally important are the characteristics of wood.

Representative of MASTEROVIT

The cross section of the timber for such a task needs at least 100x50 mm, pay attention to the humidity. If the wood is too dry, it will absorb moisture and swell, and if it is too wet, it will quickly turn black and the process of decay will begin. The best option- wood of natural drying.

In addition, all lumber before installation must be planed on all sides and coated with a protective antiseptic impregnation.

frame gates, wooden cladding, double frame: external - from profile pipe 60 × 30 × 2 mm, internal - from a profile pipe 40 × 20 × 1.5 mm.

Gate installation

Not a single fence is complete without an entrance group - a gate and a built-in or separate gate. There are two main types of gates:

• swing;
• retractable.

Swing doors most often consist of two doors of equal size, opening into the courtyard or the street, less often there is one leaf. Retractable, also called sliding or sliding, do not swing open, but move to the side, along the fence.

Pole installation

The approach to choosing the method of installing pillars, as well as choosing the type of fence, is complex.

Representative of MASTEROVIT

The choice of pole installation technology is influenced by slightly different factors: the density and type of soil, groundwater level, height difference, proximity to the fence line of a variety of objects, the possibility of detrimental effects of precipitation at different times of the year. To find out all this, specialists usually go to the sites to assess the conditions and select the optimal technology.

When a fence is erected by one's own hands, the role of the appraiser is the owner himself, he is also a foreman, he is also a supplier and performer. A great help in choosing will be the successful, or not quite, experience of the neighbors. There are several technologies for mounting pillars:

• clogging with preliminary drilling of a guide hole;
• clogging with preliminary drilling of holes and tamping of pillars with crushed stone;
• backfilling/bottling of pillars using crushed stone and sand;
• concreting of pillars to the entire installation depth using a reinforced pile.

The conditions in our case made it possible to do without wet processes - the pillars were hammered into the holes.

Representative of MASTEROVIT

To install the pillars, we drill guide holes with a manual gas drill with an auger diameter of 80 mm. The depth of the holes depends on the density of the soil. Pillars are installed in the prepared holes and they are reached with a sledgehammer by 1.2 m. When installing a fence on peat soils, the pillars are deepened to 1.4 m. This is done so that the soil layers inside and outside the pillar coincide. It is this installation method that will make the structure more durable and stable, and with seasonal fluctuations in the soil, the pillars will not lead or squeeze out.

The pillars are located every two meters - this is the optimal distance; if it is increased to three meters, the load on the structure will increase. When wet during rainy seasons, the three-meter span can sag.

Fixings were welded on the poles (before painting) - a corner and a strip (35 × 35 mm, 40 × 4 mm), to which a beam was screwed with galvanized self-tapping screws. A picket fence was horizontally fixed to the beam with a “chessboard”, equal intervals between the elements were maintained by means of a template.

Expert answers to user questions

As far as a fence made of corrugated board is popular, questions about its construction are just as relevant.

country fairy

I ask for advice from experienced people on replacing part of the fence. The total footage of the replaced area is about 31 meters. Approximately 25 meters in front (of which 4 meters are gates with a gate), behind - 5.5 meters. The replaceable part of the fence consists of pillars and frames, to which the chain-link is welded. The frames are 3 meters wide, the span between the pillars is 3.5 meters. The poles are made of a thick-walled hot-rolled pipe 89 mm, driven into the ground, filled with concrete from above, but they do not hold well and sway.

To reduce the cost of a new fence, our users want to use the old posts, as they are still in good condition. It is planned to cut the frames, take out the poles and drive them in again, at a distance of 2.5 meters from each other. Order a welded gate frame with a wicket at one of the nearby specialized enterprises, purchase logs and corrugated board there.

country fairy

There are several issues that there is no understanding after studying the thematic information.

Which minimum thickness corrugated board can be taken on the fence? Does 0.4 and 0.5 mm corrugated board behave very differently?

Representative of MASTEROVIT

The recommended thickness of corrugated board for durable fences is 0.5 mm, excluding galvanized, polymer coatings and other protective layers- exactly the thickness of the steel itself is 0.5 mm. A profiled sheet with a steel thickness of 0.4 mm is thinner and less durable, requires more careful handling both during installation and delivery, and it also needs 3 lags (12 attachment points per 1 m / p.), Against 2 lag (8 attachment points ) for a sheet of 0.5 mm. Take it as an axiom that a profiled sheet of 0.4 mm is for temporary (2-3 years) fences, and 0.5 mm is for durable, permanent fences.

The specialist advises to be more careful when ordering corrugated board. The sheets are almost the same in weight, for verification you need to use a certified electronic micrometer. There is also corrugated board with a thickness of 0.45 mm - this is an economical option. You can also consider it, but be prepared that some sellers may cheat by giving out 0.4 mm for 0.45 mm, citing a manufacturing error.

Be sure to ask the seller to measure the thickness of the metal with an electronic certified micrometer!

The next question is whether it is permissible to concrete (possibly with backfill) only three pillars entrance group, and drive the rest by 1-1.2 meters, taking into account heavy soil (clay)?

Representative of MASTEROVIT

The fence has long ceased to function as a barrier for thieves and has become an independent architectural object that complements and emphasizes all the features and advantages personal plot and your home. But as one user said: it is easier to decide what to build a house from than to choose a material for building a fence!

Difficulties of choice

So ? Stone, wood or metal? Perhaps, there is no consensus on this issue, but only one thing is clear - you should like the fence in the first place, and in order to make a choice, you should ask the following questions:

• How will the fence fit into the landscape of the site and will be combined with the style of your home?
• What will be the reliability and durability of your chosen design?
• The cost of the fence, in other words, how much are you willing to invest in its construction?

The opinion of our forum member with a nickname Pavel45:

– In general, all fences and fences can be divided into three groups:

• Decorative, made according to the sketches of artists;
• Symbolic, standing around the perimeter of the plots only for the pro forma,
• Monumental, erected where there is a need to hide from the dust and noise of the route, from strong winds or from unfriendly, and even frankly envious looks.

Symbolic fences are erected where there is no great need for them, but it is necessary to determine the border of your site.

It is important to know that the device for fencing a personal plot must meet the following requirements:

• From the side of the street or driveway, the height of the fence is set to 2 m, the degree of translucency is from 0 to 100% over the entire height;
• From the side of the adjacent area, the height of the fence is set to 1.5 m, the degree of translucency is from 50 to 100% over the entire height.
• The height of a solid fence between two sections should not exceed 1 m.

Also, when arranging fences, it should be remembered that it is completely deaf and high on small area creates the feeling of an enclosed space.

Landscape designer and user of our forum Elena Gerasimova:

- Each site owner decides for himself what he wants to close and from whom to hide. Or vice versa to show the beauty of the house and the site through the visible fence. Or maybe combine different in style and functionality in one area.

And for this you must adhere to the following principles:

• It is advisable to repeat the materials from which the house was built, and in the fence, at least one or two, everything depends on the proportions. It is possible and color solutions combine them. But it does not mean, stone house - stone fence.

This material can be combined with others and used in a minimal amount, for example, only for facing pillars or plinth.

• If style decision house is clearly expressed, then the image of the fence should not conflict with it, but complement it.

The house is the main "owner" on the site!

• The shape, color, material used in the fences create a certain image, and if harmony is found, then we can say that the fence is designer.

And there are no restrictions on materials in design.

All sorts of fences are important, but they are not always needed ...

As stated in folk proverb: they are greeted by clothes ... So the fence of the site can tell a lot about its owners.

In our climatic conditions, you can most often find three types of fence - wooden, metal and mesh. And although the chain-link mesh is considered budgetary with a competent approach, the same material, but embodied in the idea, can look very interesting.

For example, having enclosed your site with a net, with a chain-link, the perimeter of the site can be planted with climbing plants, which, using the net as a support, will eventually turn it into a hedge.

Elena Gerasimova:

- Increasingly popular hedges, either climbing plants, netted or trimmed densely planted shrubs or trees, it is not only beautiful, but also environmentally friendly.

But, do not forget, such a fence will require regular maintenance!

wooden fence

Despite the fact that such a fence requires maintenance, for example, periodic tinting, and its durability and aesthetics will directly depend on the type of wood, we can say that sometimes a wooden fence is one of the best exits to protect your site. The experience of our forum member with a nickname Spartacus.

– In front of metask was to secure the site irregular shape(pentagon), about 14 acres in the forest. One side was almost in the form of a normal wooden fence neighbor. The rest, just over 120 meters. To support the nature style of the Siberian forest, the decision was made: to build a wooden fence!

And really, what kind of metal profile can be in the forest?

• When erecting a wooden fence, it should be remembered that its design is most often of the following types:
• Fence with gaps. For example, due to the vertical, horizontal or lattice arrangement of the boards.
• Completely blank fence. With such a fence, the boards are overlapped, which eliminates the formation of cracks.

According to current regulations, a blank fence cannot be placed between two adjacent areas. Otherwise, such a fence will cast a shadow on the green spaces on the neighbor's land. Therefore, it is recommended to use mesh or lattice transparent fences: picket fence, chain-link mesh, polycarbonate and other fence options that would not block sunlight. A blind fence can only be placed on the side of the roadway.

• Combined fence using two or more materials. Great combination gives the simultaneous use of stone, iron and wood.

An interesting solution to this problem is offered by our forum member with the nickname olegok:

– The dacha starts with a fence. My wife wanted the fence from the facade to be solid and block us from prying eyes, but solid fences seem gloomy to me, and from the point of view of airing the site, it’s not very good. I decided that the best compromise would be a wooden lattice, like a blind, through which nothing could be seen from the outside.

With a similar design, if you look from inside the site, you can see almost the entire street. But the residents from the street are gone.

Also, when constructing a wooden fence, one should not forget about protecting it from sunlight and insects by painting and impregnating it with antiseptics.

Stone fence

, concrete or stone - it doesn’t matter which of these materials you choose to build a fence, but one thing can be said - such a fence has been built for centuries and often with its own appearance resembles the defensive fortifications of a medieval castle, making a depressing impression on others. After all, the fence is the calling card of your site. So how does a stone fence bring joy to oneself and surprise others? We offer the solution of our user - nickname on the forum Tetra59.

Even at the stage of building the house, the fence was made of profiled sheet, and mounted on a concrete grillage and poles dug into the ground. But since the time has come to build a more durable structure, the profiled sheet with a corner was cut off, and in its place a foam block fence was built.

The construction of such a fence costs approximately 3 thousand rubles. rub. per running metre.

After outer side the fence was plastered, and the inside was lined with limestone, sericite Tetra59 I realized that his soul required something more, namely ... to put a drawing on the fence that imitates rock art!

Tetra 59:

– I got acquainted with the artist, told him about the idea to put something similar to rock art on the fence. Then they approved his sketches and prepared the surfaces for painting.

And although the construction of such a fence is not cheap, only forged elements it took about 240 tr. the end result exceeded all expectations when children were taken to the fence on excursions!

But the area between the house and the forest Tetra59 framed differently.

– I didn’t want to visually cut off the forest from the house, so I cut off the temporary grid and installed a decorative mesh. And it's almost invisible.

When installing stone fences, it should be remembered that such fences are much more expensive than wooden or profiled sheet fences, and a strip foundation must be laid under them.

But, as they say, an original fence is not created by a single painting, especially if it is complicated by a user of our forum elephantmoto from gabions.

- I have long wanted to use gabions for construction and decoration, and now, finally, I got to try it. The main thing is to see the result!

Gabions are voluminous structures made of metal mesh and filled with crushed stone or rubble stone. And although initially they were intended to strengthen the steep slopes of the banks, rivers, lakes and artificial structures, today gabions are increasingly wide use, V landscape design allowing you to create spectacular and memorable designs from fences and patios, to flower stands.

This design is completely supported by its weight, since everything is connected together, and one segment weighs several tons, which requires painstaking manual labor and leads to a significant increase in the cost of such a fence.

metal fence

A wrought iron fence is not a cheap pleasure, and you can’t hide from prying eyes behind the openwork intricacies of such a fence, but the advantage ordinary nets - chain-links only in that it allows you to enclose your site with a fence in a short time. Therefore, the most common material for the manufacture of a fence is rightfully a metal profiled sheet.

Such a fence is made of corrugated board - a sheet of galvanized steel coated with polymer coated different colors. The fence is installed on metal poles dug into the ground. And the profiled sheet itself is screwed to the longitudinal logs welded to metal poles. Thanks to the speed of installation, such a fence is quite easy to install on your own. Forum member's experience karmanov- vlad.

- There was a dilemma - what kind of fence to make - wooden, on concrete pillars or iron. Having traveled to hardware stores, having studied all the prices, having thoroughly calculated everything, I found out that the most expensive fence in my area, as strange as it sounds, will be wooden, so I decided to build a fence from a profiled sheet.

When installing metal poles into the ground, it should be remembered that frost heaving forces act on them and in the spring the fence may squint. To prevent this from happening, contrary to popular belief, it is better not to concrete the pillars on heaving soils, but to drive them below the freezing depth into a pre-drilled well and then fill the hole with a sand-and-stone mixture in a 1: 1 ratio with obligatory tamping.

As for the cost of installing a fence from a profiled sheet, you can focus on our forum member with the nickname Yuriis:

- I poured 100 m of tape 25x40 (from 35 to 55) under the corrugated fence. Poles 60x60, distance between posts 2.4 m. My expenses were:

1. Metal - 40 tr;

2. Concrete M-300 - 50 tr;

3. Work - 40 tr.

4. Lags 30x30 - 300 m. p. - 15 tr;

Yuriis:

- There are still expenses for corrugated board. I think that together with the work, the price of the fence will be about 160 tr.

And here is the opinion of another forum member, with a nickname DimaGrek, who at first wanted to make a fence out of wood, but then changed his mind ...

– I thought for a long time, chose, wanted to build a wooden fence. After all, the cottage is nature, natural materials. But still, I preferred a professional sheet, because such a fence is built faster and is cheaper than a wooden one.

Advantages of a wooden fence: A natural material that is pleasing to the eye and harmoniously fits into the landscape of the site and the architecture of the house.

Cons of a wooden fence: This fence needs to be taken care of.

It takes longer to build and is more expensive.

Advantages of a fence from a profiled sheet: Practical in installation and operation; cheaper than wood fence or stone fence; durable, it is difficult to climb over it.

Cons of a fence from a profiled sheet: Reduces space.

Summing up, we can say that the choice of a fence is a crucial step and in order to make a final decision, you need to look at the fence of your site under different angles. Only then will your fence become not just a fence, but calling card your house!

clearly shows how to make carved elements for a wooden fence. And this video talks about correct formation hedge.