The spiky framing of the area's concrete fence. Wire fence - reliable protection of the territory from intruders

All products of our plant in Lyudinovo can be purchased in Moscow from dealers at the price of the plant.

Fences to order !!!

Among dozens of types of fences, in Europe and Russia, the most popular is a fence consisting of metal sections of a welded mesh with a zinc coating (SSSP). The mesh is made of galvanized steel wire by spot welding, and is delivered in compact rolls to production, where individual elements of the fence are prepared. A wire fence is mounted directly at the installation site, where the SSSP is attached to metal racks, either using a welding machine, or by means of hardware products - bolts, studs, etc. It should be noted that the SSSP fence performs not only decorative and dividing functions, but It is able to very effectively protect a territory that is large enough around the perimeter, since the SSSP brilliantly plays the role of a signal canvas included in a vibration or any other security system. Among other things, a fence made of SSSP is currently one of the most inexpensive signal fences, and the canvas does not require special care, is not subject to any atmospheric influences, and a high-quality zinc coating provides a guaranteed service life of about 15-20 years of continuous operation. All these factors influence the decision of our customers to buy fence wire.

Fence made of SSTSP mesh with barbed wire.

Mesh SSCP produced by the plant in Lyudinovo

Flat Barrier Safety Barrier Gyurza and SSTSP mesh

Flat Gyurza Safety Barrier and Fence

Grid SSTSP gate.

Screw feet

Metal poles are one of the main elements of barbed wire fences and fences made of light materials such as corrugated board or slate. The strength of the pillars and their competent installation largely ensure the reliability and stability of the entire structure, therefore, the choice of the type of supports and the method of their installation is decisive.

The easiest and cheapest way to install supports for lightweight fences or barbed wire barriers is to drive the post into the ground, but this is not very reliable and not feasible on all types of soil. In the process of installing the supports, a complete concreting of the column can be performed or a combined method can be used, in which the column is concreted at the surface and deepened below. This is long enough, laborious and not always economically justified. The best way to install wire fences and fences is to use screw poles, which have a number of fundamental advantages. Screw poles are a metal pipe of different lengths with a flange and blades, thanks to which the support is screwed into the ground.

Installation of ssp barriers from ssp installation options

Scheme

To install the screw poles, you do not need to mix concrete or involve a whole team of workers. This process resembles screwing in a self-tapping screw, and if the characteristics of the soil are very important when installing other types of supports, then the installation of screw poles can be performed even on weak soils and in hard-to-reach places. For maximum stability, the screw post is immersed in the ground to a depth of at least 1.5 meters, that is, below the seasonal freezing point. The wire can be pulled onto the screw posts immediately after installation, while in the cases described above, it takes time for the concrete to harden. The screw post is suitable for multiple mounting and dismounting without compromising its performance, therefore, for the construction of not only permanent, but also temporary barriers, screw supports are indispensable.

A metal fence is installed to protect your property.
This is its main function, but a modern fence is usually installed
with an eye to the "exterior" of the house, landscape design and other details, which ultimately create what is commonly called an individual style.

Therefore, it is very important, when choosing a fence for your home, to take into account such points as: the combination of the style of the fence with the style of the house, the strength of the structure, the connections of all parts of the fence, the presence of an anti-corrosion coating, etc.

High-quality 3D metal fences are one of the strongest and most durable types of fences.
Therefore, it is recommended to install a 3D metal fence.

The fence serves as protection and is an external manifestation of the quality of life, the hallmark of the house, the style of its inhabitants. A modern and stylish fence can become a source of pride for the owner.
Fences can be very diverse, as well as their purpose: protection from gusts of wind, safety of children, hide not too beautiful places of ownership - each of these cases requires its own individual approach.

Our company represents 3D welded fences on the Russian market.

3D welded mesh sectional railing in terms of durability, it is not inferior to a brick or stone fence.
The elements of the fence are made of high quality steel industrially on automatic machines. Installation of panel-type fencing is much faster than the construction of any other permanent fencing.

Purpose of 3D welded panel fences:

• cottage villages - fences for cottages and houses;
• fences for railways, highways;
• park zones;
• fencing of industrial facilities;
• administrative buildings and territories;
• sports facilities and territories;
• parking lots and car dealerships;
• fencing of warehouse areas.

Advantages of 3D welded mesh fencing:

• reliability and quality;
• high color fastness;
• does not require maintenance;
• ease of installation;
• coverage guarantee - 10 years.

Durability of 3D welded fences:

Durability and high quality products are achieved thanks to a special steel processing technology - microcrystalline phosphating. Microcrystalline phosphating is a technology recognized and used in the automotive industry. Unlike conventional phosphating of the amorphous type, this technology guarantees high quality products and increases the durability of products by 3-4 times.

Today welded fences are presented in the most demanded
on the Russian market color: moss green (RAL 6005).
All profiled products are covered by a proprietary warranty.

Welded 3D fencing is reliability, quality and ease of installation.

To fence off the territory against unauthorized entry is necessary. But sometimes the area is very large, and making a capital fence becomes a costly affair. Moreover, a beautiful fence will not always be a serious obstacle in the way of intruders.

If desired, intruders will climb over it. Or, there is no need for beauty at all, but you only need to create a difficult obstacle. For example, in industrial or agricultural areas, it is only required to provide protection from entering the protected object. A barbed wire fence is a good option in this case.

Design features

A barbed wire is a metal thread or a narrow strip with barbed wire attached to it. The wire is available in several types of configuration. The material is used both for the construction of a full-fledged barrier, and for an additional obstacle on an already installed fence of any kind.

The thorn is used both for fencing private houses and for protecting industrial facilities.

Initially, the design was invented to protect the territory against animals, and was often used in cattle breeding.

Such a wire fence does not allow painless passage into the fenced area, since the thorns cling on contact, which leads to large scratches and injuries to the body. Later, the technology began to be used for fences against people. The advantages of the design are its cheapness, practicality and the ability to install a fence with your own hands.

Types of barbed wire

Barbed wire is made by cold drawing and then winding sharp parts - thorns. More often, the thorn is round in cross-section. Diameter and hardness vary. There is a soft wire that is easy to install.

The other option is a tougher material that is more difficult to work with, but more reliable. The production is carried out on special machinery. Steel is used for manufacturing.

The most common design is a single or two-strand thread, onto which short lengths of wire with pointed ends are wound. The wire is made galvanized or uncoated.

The ribbon barb is knocked out in the form of a long metal ribbon with protruding pyramid-shaped spikes. Such a tape is wound on solid bases. By itself, it is quite soft, it can be cut with metal scissors. Even when used on solid substrates, it can be removed, which reduces the reliability of the fence. Therefore, most often the tape is used on a strong base - a steel core. A simple option is regular padding.

The disadvantage is that you can separate the thorn from the steel strand. A more reliable option is to crimp the tape around the core. In this case, the structure is very difficult to separate, and the steel core does not allow cutting the barbed wire fence.

The latter is known as Egoza. A tape 0.6 mm thick is made of steel with a small amount of carbon in the composition. It has a zinc coating. The protrusions on it are very sharp and tenacious. The core is a spring carbon steel wire with a diameter of 2.5 mm. Possesses high strength. Also has a zinc coating.

Installation methods

Installation of barbed wire is carried out in various ways:

• On top of an already installed fence. The main fence can be made of any material: brick, wood, metal sheets, concrete slabs. The wire at the top creates an additional barrier in the way of border trespassers. Today, the fidget is more often installed. The thorn is attached to brackets of various options.
• On the roof or around the roof. The wire is attached either to brackets or to additional metal strings.
• A continuous protective sheet is created. Barbed wire is attached between adjacent posts. The poles are made from different materials, most often from metal or wood. The fence is made flat or voluminous. Such a wire fence is not inferior in its functionality to any other fence.

Despite the fact that the installation of barbed wire can be done independently, this work requires the utmost care and attention, otherwise you can get serious damage. Mounting pliers and sturdy leather or canvas clothing are required to install the fence.

Flat canvas

The canvas is made from fencing. It consists of loops fastened together with staples. Each subsequent turn is shifted relative to the previous one by a certain value. Such a barbed wire cloth has an acceptable aesthetic appearance. Therefore, it is used in the city or in private households. It is slightly inferior to the spiral design in protective qualities, but at the same time, it is cheaper and more compact.

Spiked spiral fence

In addition to the flat canvas, volumetric structures are also made - fidget spirals. A fence made of such a structure is made in the form of turns of barbed wire, connected to each other by small staples. The staples are staggered. The diameter of a fencing carriage is 450 mm - the most common option for fences. The volumetric form is an impenetrable barrier. The spirals are springy and resist crushing.

Fence

The fence is a weaving of barbed wire stretched over poles. It can be flat or voluminous, depending on the type of thorn used. With a good frame, the fence turns out to be quite strong, despite its apparent simplicity. In addition, it provides unobstructed sunlight penetration.

Installation

There is no need for a foundation to build a fence. You just need. They are made from concrete, metal or wood. The distance between the posts is from 2 to 3 m. The supports are driven into the ground or concreted. The latter option is more reliable and durable.

In the first case, wells are drilled approximately one meter in depth and with a diameter smaller than the cross-sectional area of ​​the pillars. Then the support is driven in with a sledgehammer. Or the recess is done with a shovel. In the second case, a well is also drilled, but its diameter in the upper part by half the depth should be more than the cross-sectional area of ​​the support by 15–20 cm. Then the support is driven into it. The upper part is filled with filled concrete.

The barbed wire attachment scheme is quite simple. Next, you need to pull the wire between the posts so that it does not sag. Either a structure is made of several parallel threads, or a canvas is made, consisting of diamond-shaped cells, fastened together with staples.

Fences made of wire panels are a metal structure, sections of which are made of wires of various diameters. In our production, for the manufacture of various standard sizes of sections, wire with a diameter of 3 - 6 mm is used.

Our company offers to buy fences made of welded mesh panels of the ProPerimeter trademark. We specialize in the production of turnkey fencing system kits. Having the status of a manufacturer. We offer premium-class metal mesh fences at the best price throughout Russia.

Choosing a fence made of wire panels: 2D or 3D

Mesh welded panels are made from high quality wire. Two types of anti-corrosion coating are applied to the panels: zinc and zinc + polyester enamel. Zinc is applied to mesh welded sections by hot-dip galvanizing. The next layer is nanoceramics, which makes it possible to increase the degree of adhesion of the zinc and polymer layers. The final coating is weather-resistant paint, which is baked in a polymerization oven, forming a high-strength polymer layer.

The standard color of the polyester enamel is green; at the factory, you can order the fence to be painted in any color according to the RAL color system.

Depending on the purpose and individual preferences, the owner can purchase from our company fence systems made of 2D or 3D panels.

A fence made of 2D wire panels is made of wire with a diameter of 4 - 8 mm. The sections are flat - no bends. The panels are reinforced with horizontal rods to obtain a reinforced version of the "triplet" mesh. Height 530 - 2930 mm. Width 2500 - 3100 mm.

A fence made of 3D wire panels is made of wire with a diameter of 3 - 6 mm. The sections have V-shaped bends along the entire height in an amount from 2 to 4. The more bends, the higher the rigidity and strength of the structure. Height 530 - 2930 mm. Width 2500 - 3100 mm.

Also in production, you can order the production of wire panels and other components of fencing systems according to individual sizes or in accordance with the requirements specified in the project.

Why buy a wire mesh fence

The mesh panel fence is in high demand among buyers. This is due to a number of unique advantages that make it easy to win in competition with fences made of other materials.

reliable, sturdy construction that will serve without additional investment for more than 60 years;

no need to paint, it is not subject to corrosive processes, it is not afraid of sudden temperature changes;

does not block the territory of the site from sunlight, does not take up much space;

easy to install; installation does not require high construction qualifications and special tools;

low price is an important advantage.

At what price to buy a fence made of wire panels

We offer to buy a wire fence 3d and 2D in the ProPerimeter company. We have our own production, so we can offer our customers affordable prices for the entire set of fencing systems. The price of a fence made of wire panels depends on the diameter of the wire, the height of the panel, the type of protective coating. To find out the exact cost, just contact the sales department by phone on the website. The specialist will answer your questions, calculate the exact price.

Driving into the line of the Internet - search engine "buy a fence", choosing a supplier, pay attention to the declared thickness of the fence rod and the real one. If you buy a wire fence with a nanoceramic coating with a rod diameter of 4 mm, then the real thickness of the wire in the panel should be more than 4 mm. Some manufacturers use smaller wire diameters and, by coating, obtain a diameter of 4 mm. We are selling honest fences.

Today, there are many different wire structures that are designed to perform the main function of fencing and isolating a territory or object from unwanted intrusion. A metal fence made of barbed wire is a lightweight and reliable structure with very sharp spikes. Such a wire fence, today, is in great demand and therefore is widely used to protect various property. No special qualifications are required to erect it, and barbed wire is one of the cheapest materials.

Barbed wire fencing: features and types of material

Today, a wire fence is not only a chain-link, but also many other options. Such a specific fence can have different designs and shapes, and is also made from different materials. One of the most widely used is barbed wire. It is a thick wire with sharp spikes at equal intervals, hence its name.

This type of wire appeared a very long time ago, however, only since 1982 has it become popular. This happened thanks to the American farmer Henry Rose, he was the first to introduce a barbed wire fence, which made a splash. In the future, the design of the wire was improved, and the cost was minimal, which led to its active use.

There are many options from the material that barbed wire can be made from. Wire that does not have a protective coating is rarely used, since it is highly susceptible to corrosion. Usually, for the manufacture of barbed wire, galvanized steel is used, the thickness of which is 2.8 mm, or reinforced tape.

The main types of thorns:

• "Thread" with spines, which are located along its entire length;
• Straight reinforced tape (ACL);
• Reinforced twisted tape (ASKL).

The first type of wire has the simplest design and is used for fencing rural structures: summer cottages, personal plots, farms. The other two options are more reliable, they are used to protect both private and industrial or public facilities. Reinforced tape has its own subspecies. It can be in the form of a grid, diamond-shaped or volumetric spiral with different diameters. There is also a flat fence or just spikes that can be installed on an already finished fence. The reinforced spiral tape is called Bruno and has a cylindrical shape. The diameter of such a structure can reach one meter, but the length of the finished product is 25 m. The Bruno Spiral is usually used to fence off secret objects, military installations and prisons.

Wire fence: areas of use

Today, most private property owners have switched to barbed wire fencing. This type of material is more reliable and at the same time lightweight, and it is also not expensive at all. Barbed wire is a reliable protection of your property from unwanted guests and various animals. With it you will feel comfortable and safe.

On the modern market, you can find a wide variety of barbed wire, as well as ready-made sections for quick installation. It is very easy to install a barbed wire fence, without the appropriate skills for this.

A barbed wire fence can be either an independent structure or in the form of an ordinary fence installed on a ready-made protective fence. Such a barbed wire fence can be used to reliably protect any private or city property.

This type of fence is used for the fence:

• Industrial and warehouse enterprises;
• Private territories;
• Sports and playgrounds;
• Strategic objects;
• Construction sites;
• Areas where dogs are walked and trained;
• Regime objects;
• Pastures.

Such fences are distinguished by their simplicity and effectiveness. Such a construction of a fence is distinguished by its installation work; a foundation is not required here. However, any base will make the barbed fence more attractive and reliable.

Barbed wire fence: its advantages and disadvantages

Barbed wire is manufactured today by many manufacturers. For its manufacture, it is best to use only galvanized wire with springy properties. If the wire is not galvanized, its service life will be reduced to a minimum, since all structures made of this material are constantly not protected from weather conditions, therefore they are prone to corrosion.

Such two brands as "Gyurza" and "Egoza" are currently the most popular. These two types are used both for fencing important areas or objects, and as a decorative decoration. You can create interesting and original landscapes with the help of a small thorn by painting it in various colors.

Fences and other structures made of any type of barbed wire have a number of positive advantages that distinguish them from other wire products.

Benefits of barbed wire fencing:

• Affordable cost;
• High degree of protection;
• The product quality is very high;
• Corrosion resistance;
• Simple and easy construction;
• Repair speed;
• The presence of decorative qualities;
• Possibility to connect to voltage;
• Excellent light transmission;
• A variety of species.

Another positive quality of this material is the ability to erect very high barriers, of various shapes and sizes. Possessing such positive qualities as durability, strength and reliability, the thorn still has one drawback - it is very light. Therefore, when erecting a fence made of this material, good fastening is necessary. For this, special fasteners are used.

Do-it-yourself barbed wire fence

You need to start making a barbed wire fence by choosing its type, since the installation itself will depend on this. Then we decide what the structure will be: independent or installed on a ready-made barrier. For an independent fence, it is imperative that there are support pillars, between which the barbed wire will be attached.

Support pillars or pillars are selected from metal, wood, concrete and installed by driving them into the ground at a certain distance or concreted in holes dug for this purpose. The distance between the posts should not exceed 2 - 2.5 m.

For fastening the wire, special brackets are used, which are attached directly to the support posts with bolts or simply welded. Brackets can be of different sizes and types: straight brackets, L-shaped brackets, which are attached at a slope, as well as Y or U shapes, which allow you to attach the wire in various ways. You can do all the installation work with your own hands, using the necessary tools, protective gloves and tight clothing to avoid dangerous injuries and wounds.

Installation work order:

• Using a rope, we mark the territory;
• We install support racks;
• We fasten the brackets using welding or special fasteners;
• The barbed spiral is installed on top of the brackets and secured with brackets;
• A double string is pulled through the entire length of the spiral; for reliability, they must be perfectly stretched;
• The spirals of the tape itself are aligned along the strings and fixed with twists;
• Between the pillars, at a distance of 10 - 20 cm, stretch a wire with barbs;
• Using mounting brackets, overlap the wire.

In order to enhance the protective function of the fence, an additional more modern technology is used, namely, a voltage line is supplied to the structure. Necessarily, then it must be marked with a special sign.

Barbed wire fence (video)

The unusual fence made of barbed wire is at the forefront of property protection, it is a reliable fence that does not require unnecessary efforts and high costs. This is a great fencing option to keep your property safe from unwanted intruders and nosy bystanders.