How to restore your old desk with your own hands. How to make a new piece of furniture out of an old "boring" kitchen table Restore a coffee table with your own hands

Furniture that is lacquered is returning to use. After all, lacquered products look rich, and the interior is given originality and solidity. Although, to be honest, her surface is quite problematic. It can be easily damaged. A very common defect is the occurrence of scratches. You should not immediately get rid of the spoiled table, but you should try to restore it. This process can be entrusted to master restorers or try to restore the lacquered table with your own hands.

Restoration technique

Let's figure out how to restore a lacquered table using the restoration method. This is one of the most better ways the return of a dignified look to the varnished table. For example, to eliminate scratches, it is necessary to remove a layer of varnish on the defective places, and then apply a new one. This method is quite effective and will get rid of any scratches. But not only scratches are a problem for lacquered furniture... The next disadvantage that may appear over time is darkening varnished surface... As a result of clouding the surface of the countertop, appearance the table begins to lose significantly in relation to other furniture. Such a defect is corrected in a similar way: removing the old layer of varnish and reapplying a new one. This method is quite simple, and it is quite possible to varnish old table do it yourself.

The sequence of the restoration work

You can renew an old lacquered table in several stages. But first, you should prepare some tools and materials and think about your safety. So, let's get acquainted in detail with the algorithm for performing work on the restoration of the lacquered table.

Determine the degree of wear

Before restoring the varnish on the table, you should first assess the degree of defects formed.

Choosing a material

The question arises of how to remove the varnish from the table. The correct materials must be selected to ensure the quality of the restoration. Many believe that problem areas can be removed with alcohol. In some cases, minor defects can indeed be applied with alcohol, but unforeseen consequences may occur, such as roughness, light areas, etc. Therefore, we will focus on specialized materials that will become good helpers for novice craftsmen.

Shellac varnish. Such material not only helps to restore the surface, but also emphasize its originality. This is one of the oldest and most proven materials. The consistency of the polish is more like a liquid than a varnish. To achieve a high-quality result, this composition is applied in about 50 - 60 layers. It is because of this that the original deep color is achieved. This is very good option, which will remove scratches on the lacquered table.
Nitrocellulose varnish. This solution is used to restore large table surfaces. For its application, sprayers are used, which provide a very fast and uniform spraying. At a lower speed, the droplets of the solution begin to solidify, and the desired effect of a smooth and uniform surface will be quite difficult to achieve. That is why it is not recommended to use standard spray guns, which additionally form air bubbles, which are almost impossible to get rid of.
Pentaphthalic varnish. it perfect material for table restoration, as it is quite simple to work with. It does not require special devices for application and dries quickly enough. Apply it in at least 4 layers. It is possible to exclude the acquisition of primer solutions, since the first layer of pentaphthalic varnish will act as a primer. After applying the composition and completely drying it, sanding should be done.

After you have decided on the choice of the restoration composition, you need to pay attention to such a moment as the definition of color. You can use a colorless varnish, or you can purchase a varnish that imitates the color of any wood. In the second case, it is necessary to correctly determine the tone of the varnish.

Step-by-step instruction

Let's give detailed instructions, which will answer the question of how to properly varnish a wooden table. It consists of several stages:

The preparatory stage consists of the following aspects:
the surface of the table is thoroughly cleaned using a specialized compound or using ordinary warm water;
remove the damaged layer with a scraper;
we begin to grind the surface with sandpaper until matte is achieved;
we clean the surface of dust.
Applying varnish on water based:
the surface is covered with several layers of water-based varnish;
each subsequent layer is applied after the previous one has completely dried;
after last layer completely dry, we perform surface sanding;
we clean the surface of dust.
Performing work with acrylic-based varnish:
initially we choose a varnish that matches the surface of the table in shade and shine;
diluting the varnish by 15% with white spirit, priming the surface;
after the primer layer has dried, we perform intermediate grinding;
cover the table surface with undiluted varnish in several layers, letting the previous layer dry beforehand;
we produce finishing surface grinding.
Please note that after all layers have been applied to give the surface a glossy shine, the surface should be sanded.

By following all the recommendations, you can get a very high quality varnished surface. It is clear that in order to get a decent quality, you should use a spray gun. Below is translated a video on varnishing the table and given useful tips for restoration.

Video: Varnishing. An original and simple workshop at home.

Video: The varnish is dry. What to do? New life old furniture.

Video: Common mistakes when painting with a gun

Video: Turning pine into wenge.

To add gloss, exclusiveness and chic, to make an unusual accent in the interior, you can use original table... Moreover, no one will guess that this piece of furniture used to be an unprepossessing ruin.

Restoration methods

There are many ways to improve, decorate, and refurbish an old table. But before starting work, you need to prepare the future "canvas" - remove the old coating, sand it, screw all the nuts and screws (so as not to stagger and dangle), putty, stain (if necessary) or varnish. Then start decorating. Conventionally, all methods of decorating a wooden table can be divided into two groups:

Surface painting, including self-painting, painting through a stencil or using stamps;

Surface gluing special materials - wallpaper, self-adhesive film, decoupage with napkins or interesting clippings, overlaying, photo printing, the use of mosaics or tiles.

The glass table will have to be updated a little differently. It is quite possible to glue it with wallpaper, film or make decoupage from the inside.

You can also paint the glass surface with special paints and get an interesting design.

How to upgrade a glass table?

Beautiful glass coffee table quite often can be found in modern apartments... As a result of improper care glass top loses its attractive appearance.

The legs are loose, chips and scratches appear on the glass. If there are scratches on the tabletop, in which a nail can fit, then it is better to give the table to a special workshop, dispose of or replace the glass with a new one.

If the damage is not so terrible, then you can try to reanimate this piece of furniture.

You can get rid of the glass countertop from scratches at home both by handymen (toothpaste, soda, transparent nail polish) and special means(GOI paste, car polishes, means for polishing precious metals).

First you need to clean the surface, then gently rub in or apply the composition to the scratch. Do not overdo it, otherwise you may get several more instead of one scratch. Wait a little for the compound to set and clean the glass again.

To get rid of scratches, use the most common, non-gel toothpaste... Soda is dissolved with water to a state of gruel, approximately in a ratio of 1: 1. GOI paste must be used proven, real. Transparent varnish will not completely eliminate the problem, but only partially. At a certain angle of illumination, it will be noticeable that there were scratches in that place.

Loose table legs are also subject to repair. Usually, the table legs are attached with special glue. This glue can dry out over time. It can be removed and replaced with new adhesive. If the legs are attached to screws, self-tapping screws, then they can be unscrewed and replaced with new ones.

Now the table can be given a completely new sound using various decorating techniques:

Paste over the table from the seamy side with decorative foil. Avoid bubbles when wrapping the table. It is better to glue the film a little, gradually pushing back the substrate. If bubbles do appear, then you can pierce them with a needle and smooth them out;

Make decoupage. To do this, you need pictures (for example, from napkins or on rice paper, or images specially prepared for this), PVC glue or special for these works, brushes, a file, varnish for decoupage. The necessary equipment can be purchased in shops for creativity and scrapbooking;

Paint with stained glass paints. Acrylic contour, stained glass paints, cotton swabs and napkins, alcohol for degreasing the surface, a sketch of a drawing, scotch tape - this is a set of items that will be needed for this work;

Fix the backlight around the table perimeter, led strip;

If the design allows you to make a mini-garden, an aquarium or a bright composition of stones, shells. When the table has a small box, which is covered with a tabletop on top, then you can put a pallet on its bottom and plant succulents there (plants that do not need frequent watering). Or decorate the box with shells, stones, or other items.

How to restore a wooden table?

Wooden table can be made from MDF or chipboard, or from solid wood. In any case, the restoration of the old table at home will take place in several stages. Let's take a look at all these steps.

Preparatory- check all fasteners, disassemble the table and re-fasten, clean the surface.

Removing the old coating. Sometimes it may only be necessary for this special composition which removes varnish, paint. But most often you also have to use coarse-grained and fine-grained sandpaper, grinder... It is necessary to sand along the grain to avoid the formation of new scratches.

Sealing cracks and chips. To do this, you need a putty for wood or a polyester analog. After filling, re-sanding. At this stage, you can stop and not carry out further work (except varnishing), cover the wood with a stain, which will give the table new color and view. For example, turn an oak table into an imitation of wenge or another type of wood. But when the damage is significant, the next step is necessary.

Primer and subsequent puttying. Without a primer, the varnish will lie poorly and unevenly. An alkyd or shellac primer is suitable for wood.

Giving the final design. At this stage, painting, pasting of the table is carried out. If the table is painted, the paint should be applied in at least 2 coats.

Final coating with varnish or wax. Varnish and wax should be covered in several layers.

This refurbished polished table will last for years to come.

Written or magazine, children's or toilet - regardless of its purpose, it will become an interior decoration, because you spent so much time on it and put your soul into it.

How to recolor?

Table staining is the most popular restoration method. What could be more laconic than a white table? Only black. Therefore, the choice of paint (acrylic or oil, enamel) is very important. How long the restored table will serve depends on what paint the repair was made, or rather on its characteristics.

To choose a paint, you need to understand where and how the table will be used, what materials it is made of.

Water-based acrylic paint suitable for heated rooms, withstands moisture well. Dries quickly. Can be washed off with water during application. But after drying, it does not lend itself to water. Alkyd compounds are considered more reliable.

Oil paints are losing their popularity due to an unreasonably high expense.

Wood enamels attract with their glossy surface and high performance. In addition, nitro-enamel paints set quickly.

The paint was selected and purchased; further repair of the table presupposes its coloring.

The surfaces must be pretreated, cleaned, removed the old coating, removed scratches and chips, putty, primed, protected decorative inserts, for example, glass, tape. And only after the primer has dried can you paint.

To give an even color, the paint is applied in several layers. The first layer is actually rubbed into the surface.

Two or three layers are enough for a rich color to show through.

To apply an additional pattern to the countertop, you can use pre-prepared stencils or the most common tulle. When the base color has dried, the tulle (or stencil) is fixed and the pattern paint is applied. You can do this with a brush, but it is better to use a sponge or spray paint. Ready product, to give more aesthetics and strengthen the surface, varnish.

To give a graphic pattern (lines, zigzags, rhombuses, squares), you can use scotch tape. Mark the future drawing with adhesive tape, apply the first color with paint. If necessary, repeat the procedure with other colors. Varnish the finished worktop.

If it is necessary to achieve the effect of aged wood, then first a special composition is applied to the treated surface (cleaned, sanded and primed).

Patination can be done with a dark stain. Then the first coat of paint is applied to the wood. Then a second layer is applied lighter and more liquid paint... When the paint is dry, we go over the surface of the sandpaper. The desired effect has been achieved.

The table is ready for topcoat varnish.

We update the plastic table

Many are afraid to start decorating a plastic table because of its material. In fact, a plastic surface is a more rewarding material for restoration. It does not require preliminary and lengthy processing.

The maximum is getting rid of scratches and chips. Well, if the surface is even, then it is enough to sand it just a little to roughen it up, the paint or soil could adhere better, or degrease it for further work- gluing films, wallpapers, tiles, mosaics, eggshell or decoupage.

To decoupage a plastic table, you will first need to process the table top. Sand it, put acrylic primer. Then think about how you will arrange the pictures. Make small sketches of their future location. Usually napkins or drawings on rice paper are used for decoupage, but for these purposes you can use any clippings and even pictures printed on a printer.

At the end of the work, the tabletop is varnished.

For a spectacular decoupage, you can use fabric. For decorative purposes, cotton material with a bright pattern is suitable. The decoupage procedure is the same, only PVC glue is applied immediately to the entire fabric.

Decor options

The restoration and subsequent decoration of the table is a very time-consuming process. But the result is worth it, because you can get an exclusive designer item with which memories are already associated. Furniture decor can be completely original and at the same time very organically fit into the concept of using the object and the room.

Suitable for a book-table or folding table laconic design... It can be dyed one or two colors. And you can give nobility and accentuate the natural structure of the tree.

If you own an old table that needs to be updated, or you have purchased a table that looks very boring and you want to decorate it with something, then the tips below are for you!

In fact, changing the look of a piece of furniture like a table is easy enough. And there are many ways how exactly this can be done.

Adhesive tape

Let's start from the very easy way Is the use of self-adhesive film. Surely you have seen such a film in stores. It is usually sold in rolls like wallpaper.

At the same time, it has a smooth surface that is easy to wash and which simply cannot be damaged or deformed in any way.

First, take measurements at home - exactly how much of this film you will need to purchase. Take it a little with a margin so that there are no ugly joints on your table.

The very process of using self-adhesive film is very simple - there is no need to prepare furniture before this. You simply peel the film off the paper and apply it to your desk, gently pressing it against the surface.

The table doesn't even have to dry. He will immediately be ready for use in an already updated form.

Paint and stencils

If you are ready to get a little more confused than sticking a self-adhesive film on your piece of furniture, you can, armed with paints and a brush, appear in the image of a graphic designer.

The most important thing is to come up with a storyline for your table. Think about what you would like to portray on it? It can be whatever you want. If you have the makings of an artist, you can start painting right away, with or without sketching.

Note! Sofa cover - what should it look like? 100 photos fashionable novelties and design!

But if you are “for you” with art art, do not despair! Stencils will come to the rescue. You can purchase a stencil at a stationery store or make your own.

To do this, it is enough to cut out a drawing from a magazine and use it as a kind of template, according to which this drawing will be transferred to your furniture.

Or draw any of the items you like with a pencil on a sheet of paper, cut it out and, in the same way, putting it on the table, paint over the gap of the cut stencil with paint. After removing the stencil, you will see the drawing on the table.

If you think this method is difficult to do, you can turn to a professional artist for help, for whom this type of work will not be difficult.

True, the artist's services will need to be paid for and this method can no longer be called budgetary.

As for the paint to be used, it must be moisture resistant. Most the best option acrylic paint is considered. It is odorless and dries very quickly.

In addition, acrylic does not fade in the sun, is water resistant and high humidity generally.

We can safely say that a table covered with acrylic paint will serve you for a whole century, and this will not be an exaggeration.

Decoupage

There is another way to decorate a table, which is very similar to using stencils. This method is simply called decoupage. What is it?

Any fragments of drawings from magazines, napkins, various albums are taken. It can even be photos from your personal archive or just your favorite pictures from the Internet.

In general, whatever you like. You cut out the elements that interest you and put them on the countertop. First, see if it looks pretty. If you like the option and you are ready to decorate the table with these fragments, then you can get to work.

The piece of furniture must be thoroughly sanded, paint removed or varnish removed. The table surface must be clean, dry and perfectly level. In general, it must return to its original appearance.

After that, you take previously prepared elements or photographs, cover the reverse side with PVA glue and put them on the countertop.

Such manipulations must be done with each photo. Then you should cover all the superimposed pictures with varnish.

The varnish will prevent your table from unwanted damage, scratches and other deformations. Your photos (decoupage) will be under reliable protection... At the same time, the decoration of the table will not only update it, but will also delight your eyes!

There are many options for table decoration. Most importantly, don't be afraid to experiment! And you will definitely succeed.

Photo of ideas for decorating the table

Furniture items take center stage in the interior. So, in the kitchen or in the dining room, the main attribute is the kitchen table. In order for the product to serve for a long time, the hostesses cover the tabletop with a tablecloth or special napkins. But what if the furniture is damaged or deformed? In this case, you can restore the kitchen table with your own hands. Exists different ways and technologies for improving the appearance of the structure. Therefore, you should not throw away the worn out items, because they are easy to fix, decorate and decorate.

Covering with self-adhesive foil is the most economical option for updating the table.

Preparatory work

Before decorating the kitchen table with your own hands, you need to prepare the product. It must be free of dust and dirt. To do this, wipe all table elements with a damp cloth. If the product is heavily soiled, you can use special household chemicals. After wet processing of structural parts, everything must be thoroughly dried. Otherwise, the accumulated moisture will contribute to the appearance of mold and fungal infections, which will negatively affect the quality of operation.

The wooden kitchen table must be carefully inspected. If cracks or gaps appear on its surface, then they need to be processed with sandpaper. This will help to strengthen the structure and facilitate recoating.

It lies not only in its aesthetic transformation. It is also necessary to take care of the reliability of the fastening. Therefore, in order to update the kitchen table, it is recommended to detach all of its elements. If the fastening mechanism is deformed, then it should be replaced. Strengthen the hold kitchen table you can use additional metal corners and brackets.

Very often the kitchen countertop is equipped with a polishing coating. In order to renew an old kitchen table, the cover must be removed. Experts recommend doing most of the work in an open, well-ventilated room. Cover the floor with unnecessary cloth or paper.

For finishing work you will need the following tools:

dry cloth;
polish remover;
putty knife;
metal wool;
alcohol solution;
brushes;
gloves;
mask for the face;
sandpaper.

The brush is moistened in a special solution used to remove the polishing coating. It can be thin or thick. For ease of use, it is recommended to pour a small amount of the mixture into a separate container. This consistency is applied in a thick layer to a specific area. After that, you must wait until the surface has absorbed the solution. A stiff brush can be used for some areas. Thus, it will not be difficult to clean the kitchen table with your own hands. To do this, you need to choose the right materials for processing.

Experts recommend that after removing the polishing layer, treat the table surface with sandpaper and metal wool, after which the base will become even. The resulting surface becomes ideal place for decorating and creating a new design.

Tiled update

Decorative tiles are one of the most popular materials for cladding kitchen sets. For self-design of the countertop, you need to measure it and choose the right material for it.

Tiles of various textures are a durable and reliable means for cladding countertops. The good thing about the tiles is that they are easy to clean and that you can safely put hot dishes on them. For finishing the kitchen table, it is recommended to choose elements with matte finish... For work you will need:

tile;
grout for joints;
plastic crosses;
special glue;
edge profile;
brush;
notched spatula;
building level;
dry cloth (sponge).

A special tile adhesive is applied to the prepared and cleaned base of the countertop. This procedure should be done using a notched trowel. During fixation, the material will be firmly and securely attached.

The tile is pressed firmly against the base of the table. The elements of the product are connected to each other in the desired composition. It is recommended to strengthen the seams between the materials with plastic crosses. Thus, the products will be fixed to each other at an equal distance. By using building level you need to monitor the position of the parts.

After the main work is done, it is necessary to wipe the seams between the tiles. To do this, use a special mixture that can be purchased at any hardware store. The grout is applied to the base of the table after the glue has completely dried.

In order to make the kitchen table look beautiful and festive, it is recommended to decorate the side parts of the countertop. This procedure can be carried out using special edge profiles. They can be matched to the appearance of the tiles.

Restoration with paint

This method, which allows for an unusual update of the kitchen table, is available to everyone. You can paint both the table top and the legs of the product. The color and design of the new construction depends on the preferences of the owners. In order for the kitchen table to become the central attribute of the room, it can be painted with bright paint. Decorating an interior item allows you to show imagination and skill and create an original masterpiece at home.

For work, it is recommended to purchase a quick-drying paint and a brush. The work space should be spacious. It is recommended to cover the surface of the table. Some owners prefer to use a solid color, but combining different shades will help create a unique furniture design. Some masters use stencils for decoration: the main part is painted in one tone, and on the sides or in the center of the tabletop they create an original drawing using a stencil.

Decoupage technique

Decoupage napkins are ideal for decorating any kind of furniture.

Spray paint quickly applies and dries completely in 2 hours.

With their help, you can unusually decorate the table in the kitchen. The attribute should be decorated taking into account the theme and style of the room. There is a large selection of appliqués that will perfectly complement the look of your countertop. In addition, the decoupage technique can be used for the side parts of the structure and framed with the legs.

To work, you need to prepare tools:

napkins for decoupage;
PVA glue;
capacity;
brush.

With the help of glue, the drawing is transferred to the table surface. For work, you can use both special napkins and images from magazines, newspapers. If defects appear, they can be masked with paint. At the end of the work, it is recommended to treat the surface with varnish. This will significantly increase the service life of the product.

Table decoration methods

The variety of decoration methods allows the owners to radically change kitchen set... An affordable and practical decorating method is self-adhesive foil, which helps you decorate your furniture yourself. It is enough to choose the desired shade of the material with increased density. Gluing the film on the base of the table top allows you to update the product in the shortest possible time.

Some owners use old cuts of wallpaper to decorate furniture. For work, you need to purchase a special glue. Decorating with wallpaper will make the interior unusual and original. In addition, you can purchase wallpaper with imitation of stone, brick or tile.

In the reconstruction of old furniture, you can show imagination, ideas and skill. You should not be limited to just decorating the countertop. Replacing the legs will create new design in your own kitchen. Updating the table is available even to people who have never encountered such work. It is enough to use different decorative overlays and homemade decorations to radically transform this piece of furniture.

After all, this is a very exciting and creative process. In addition, it is much more enjoyable to have unique furnishings in your home than buying replica furniture. It is also necessary to take into account the fact that the repair of worn out chairs and cabinets is much cheaper than buying new furniture.

Painting a table using the doodling technique is a complex and time-consuming process, but all you need is a sketch, a marker or paints, as well as varnish.

But if this is your first time taking on such work, then you should start by reworking a fairly simple item. For example, restoring a coffee table with your own hands does not require special knowledge and skills. And it can be completely restored in just a couple of evenings.

Preparing for reworking the table

Before giving a coffee table a new look, it must be carefully prepared. To do this, you need the following tools:

grinder or special drill attachment;
a set of sandpaper of varying grain size;
flat metal spatula;
screwdriwer set;
adjustable wrench.

Craquelure-style coffee table restoration - creating a cracking effect.

First you need to disassemble the table, remove the table top, legs, disconnect the shelves and drawers. Remove all fasteners very carefully, being careful not to damage the wood. If necessary, the adhered bolts can be cut or drilled out. Be sure to remove all hardware, even if you intend to reuse it.

Next, you need to remove decorative coating... The veneer comes off easily if its edge is picked up with a spatula. Varnish coating it cannot be restored at home, so it must also be removed. Old oil paint it is easier to scrape off if it is preheated, for example, with the help of a building hair dryer. Be extremely careful not to scratch the surface.

Every detail must be thoroughly sanded to bare wood.

All large cracks and chips must be putty. For this, a product designed for woodworking is suitable. If desired, it can be tinted with a few drops of water-based paint or a special pigment available in stores. Small scratches and the cracks are filled with epoxy glue. After the putty is completely dry, the surface of the furniture must be processed again with fine-grain sandpaper.

Now the coffee table must be reassembled, replacing all the fasteners with new ones. Be sure to coat the slots under the fasteners with glue and tighten them with clamps for about a day. At the last stage of preparing furniture for decoration, all surfaces must be thoroughly degreased.

Back to the table of contents

Decorating countertops with mosaics

Figure 1. Using a mosaic, you can not only make a coffee table unique, but also hide cracks and spots that appear. In addition, the whole process does not take much time and money.

Any alteration of a coffee table begins with painting it. You can cover the entire surface with wood stain, then the structure of the wood will appear more clearly. Usually, a transparent agent or stain is used, which contains coloring pigments. In this way, the furniture is given a resemblance to expensive types of wood: oak, sandalwood or ebony.

If you want to paint your table, then it is wiser to use acrylic paints. They dry quickly, do not leave streaks and have virtually no unpleasant odor.

In combination with a countertop decorated with a tiled panel, both dark and light furniture look great. Therefore, the appearance of a coffee table completely depends on your taste and the general interior of the room in which you are going to use it.

But it should be remembered that under light paint on old furniture, yellow spots may appear over time. To prevent this from happening, the table must first be covered with 1 layer of transparent acrylic varnish.

After the varnish is completely dry, 2 coats of primer are applied to all surfaces. It will add strength to the final coat. The coffee table is painted last. It is most convenient to use spray paint in cylinders. Such a coating turns out to be even, with a slight glossy shine. In addition, it is easier to paint over with a spray bottle. hard-to-reach places... But sometimes such dyes (unlike traditional acrylic paints) have a pungent specific odor. Therefore, it is wiser to carry out work in a well-ventilated room or outdoors.

Now you can start decorating the countertop.

Back to the table of contents

Product decoration

For a mosaic panel, you will need the following materials:

tile (best buy ready-made modules fixed on a grid or paper);
tile adhesive;
trowel mastic (you can purchase a colored product that will add expressiveness to the panel);
masking tape.

In addition, you will need a small notched trowel, an old toothbrush, a clean rag, and a large household sponge.

Tile adhesive must be diluted as indicated in the instructions. Don't cook a lot of ingredients at once. You will need about ½ cup of grout to lay the tiles on the countertop.

Using a spatula, apply the adhesive to the wrong side of the tile block. Turn the module over and press it against the surface so that excess glue comes through the mesh. With a clean cloth, remove excess composition by scrubbing the mosaic thoroughly. But do it carefully, otherwise the module may move. The table must be allowed to dry for about 24 hours.

Small rubber spatula the composition is applied to the seams between the tiles. Then with a toothbrush you need to "drive" it into the gaps of the module. This is required in order to remove air bubbles from the grout. The mastic must be allowed to dry for 15-25 minutes, and then the excess must be removed by washing the resulting panel with a sponge.

The result of this decoration can be seen in Fig. 1.

In this way, you can transform not only a coffee table, but also, for example, a bathroom cabinet.

Back to the table of contents

Decor with wallpaper

Figure 2. Decorating the coffee table with the remnants of wallpaper will help it harmoniously fit into new interior premises.

DIY furniture can be transformed even with a piece of wallpaper that remained after the renovation. Such a restoration will take you about 2 hours, and as a result you will receive a very elegant piece of furniture made in the Art Nouveau style. Such a coffee table is quite difficult to find even in salons. exclusive furniture... To remodel the table, you will need the following materials:

vinyl wallpaper (their size should be equal to the area of the table top plus 15 cm of hem allowances on each side);
wallpaper glue;
transparent furniture varnish or a special composition for decoupage;
furniture carnations with decorative heads.

Also, do not forget to prepare a plastic spatula, brushes or rollers for applying glue and varnish, centimeter ruler, pencil and hammer.

If you have chosen this way of transforming your coffee table, then it is better not to paint the tabletop first, but to cover it with 2 layers of furniture varnish. Before you start decorating, the surface must be completely dry.

Dilute the wallpaper glue and let it swell for 10-15 minutes. This time is just enough for you to remove from the tabletop required dimensions and cut a blank from the wallpaper. Be sure to notch the allowances in several places and notch them in the corners by cutting out the triangles. Try on the workpiece by carefully bending the allowances.

Apply glue to the wrong side of the wallpaper, roll it up, letting it soak in the product. You can also glue the countertop itself with glue.

Lay the wallpaper over the furniture, carefully straightening out any creases and creases. Remove air bubbles with a plastic spatula. Fold in the allowances and glue them to the inside of the table. Let the glue dry completely and cover the coffee table with 2 coats of varnish (letting the previous coat dry completely).

Then, using a ruler and pencil, mark out the future location of the studs. They can be placed in 1 line or make up an interesting pattern from the heads. It is only necessary to ensure that the same distance is maintained between the caps. Drive in nails along the lines.

The result of the rework is shown in Fig. 2.

Instead of wallpaper, you can use a piece of fabric, such as a satin curtain. Then the tabletop will also acquire an original texture.