How to hang a flower pot in unusual ways. How to make pots and pots for petunias with your own hands: simple and original ideas for decorating a garden, step-by-step photos and videos

Flower pots are very popular, and you can find a lot of instructions on how to make them online. In one of ours, we have already told how to make pendant flower pots do it yourself, today we offer you a different approach. The pots themselves do not need to be made; we offer completely ordinary flower pots to turn them into hanging ones.

Materials and tools for making hanging flower pots:

3 small flower pots with planted plants
a skein of thin clothesline
15 raw wood beads approx. 18 mm in diameter
9 wooden beads with a diameter of 25 mm
11 beads with a diameter of 38 mm
copper tubes¼ inch diameter
pipe cutter
acrylic paint
tassel

DIY hanging flower pots

Color the beads in different colours... If you want the paint to lay in an even layer, the beads can be pre-sanded with sandpaper.

Advice: The easiest way to dry the beads is by putting them on the wire.

A rather interesting effect is obtained if you paint the beads for each pot in different shades of the same color.

Pull two ropes through each group of beads. In our case, each pot was made using six ropes tied in a knot at the top.

The beads can be placed in any order. In our case, their diameter first increases and then decreases.

Determine the height at which you want to fix the wooden beads, and tie a knot in this place on each pair of ropes.

Divide each pair of ropes, and knot the left rope from the first pair to the right rope from the second. Tie all six ropes in pairs in the same way. Repeat the procedure one more time, moving downward.

Tie all three pairs of ropes with one knot, cut the ends of the ropes, or leave them as they are.

We make the second hanging pot according to the same principle.

Cut the copper pipe into lengths of about 70 mm.

Alternating between colorful wood beads and copper tube lengths, decorate each pair of ropes. In this case, it is better to use beads. small size so that their diameter is not much larger than the diameter of the tubes.

Secure the beads and tubes with knots.

Separate each pair of ropes and tie them with ropes from adjacent pairs. Repeat the same with a slight downward movement. Tie all the ropes into one knot.

Place a flower pot in each of the resulting rope sleeves. Now all that remains is to hang the pots in the window or doorway, decorate them with a veranda or living room.

It is not necessary to use wooden beads and copper pipes to decorate hanging pots, it all depends on your imagination.

The original article is in English.

To decorate a garden and a house, summer residents often use hanging planters.

Vine baskets look very beautiful, which can be made in a wide variety of shapes, for example, in the form of a ball, a cone or a rectangular box.

Perhaps a harmonious decoration for any landscape design will become flowerpots made of wire or forged metal... This option is especially attractive in that it creates the feeling of a kind of complete "flight" of the flower bed.

In addition to the shape, material and design of the flowerpot itself, when choosing it, it is important to pay attention to the fastening. In addition, the fastening of containers for hanging flower beds must be very durable and reliable.

This is necessary so that when decorating a flower bed in the yard, you can rotate the plant from time to time to protect it from the sun's rays.

The specifics of planting suspended flower beds

The planting of a hanging flower bed depends on the shape of the flowerpot. Plants are planted in simple flowerpots that resemble indoor flower pots, that is, those that have only one open surface.

It is quite another matter if the flowerpot is designed to create a hanging ball. In this case, the walls of the frame are filled with moss, which is designed to retain moisture, and the entire basket is covered special film, which is most often sold complete with such flowerpots

Then, in those places from which shoots should subsequently grow, small holes must be made. The seedlings should be carefully pushed into the holes made, and the soil should be poured into the flowerpot and the plants should be planted at the top.

Having planted flowers to create a hanging flower bed with your own hands, you should water the soil a little and hang the flowerpot in cool place for several days.

Hanging flowers in the garden: which plants are suitable for hanging flower beds

To create hanging flower beds, it is better to choose unpretentious plants in the care that do not have special requirements for the condition of the soil.

In addition, when choosing inhabitants for such flowerpots, it is important to take into account the ratio of the size of their root system to the size of the pot.

For example, the roots of petunia grow very quickly, and if the flowerpot for this flower is less than 6-8 liters, then it root system will soon fill the entire volume of the container, because of which the plant may die.

Very beautiful design will have a hanging flower bed with his own hands when planting lushly flowering summer plants in flowerpots, for example, pansies, petunias, verbena, marigolds, etc.

Also, almost all houseplants, including Kalanchoe, nasturtiums, daisies, rejuvenated, stonecrops, etc., get along well and grow in a hanging planter or flowerpot.

Of course, bright colorful flowers will always become a worthy decoration of any garden or interior, but you should not think that you can only use flowering plants... For example, flowerpots with spicy herbs- mint, rosemary, etc.

And those who love originality can be advised to make a very unusual, but very useful decoration- a hanging basket with small-fruited vegetables, for example, strawberries, which will bear fruit even on the veranda or on the balcony.

The specifics of care for hanging flower beds

The care of plants planted in hanging planters depends on whether they have pallets.

Baskets without a pallet prevent moisture stagnation in the soil, which, on the one hand, is good, as it slows down the rotting of the plant root system, and on the other hand, it can lead to a lack of moisture if the flower bed is in a sunny area.

If the flowerpot is equipped with a pallet, then you should not water the plant too often, and also install it in darkened areas.

In addition, the soil in suspended flower beds must be fertilized periodically, because during watering, minerals are washed out in it.

In all other aspects, the care of plants in pendant garden beds is no different from caring for plants planted in open ground- they also need to be watered regularly, removed dead leaves and pest control.

Hanging flower beds are exactly that addition that can add brightness and expressiveness to any suburban area.They can be hung in gazebos and pergolas, on fences and on poles, on garden benches, in the recreation area, on the summer terrace, balcony and even on the walls of the house - everywhere they will look beautiful and harmonious.

However, when decorating suspended street beds, it is also important to take into account the style features. personal plot... You can beautifully highlight the beauty of the landscape with bright color solutions or unusual shapes, but you can focus on the natural beauty of plants.

If such "settle" in your garden hanging flower beds, rest assured that this solution will not disappoint you. Beautiful flowers and plants, neat and well-groomed, always delight the eye and create an atmosphere of comfort, and if they are also hung in beautiful, original flowerpots, then such an arrangement of the site can only be envied.

Old enamel bowls, flower pots, buckets will be used to create pots. The containers are hung on chains and hung as high as possible so that any passer-by can see and appreciate this beauty.

It is such a pleasure to do simple things for your garden with your own hands. Treat yourself to a hanging flower pot, it can perfectly decorate the porch of a private house or a balcony in a city apartment. And we will share with you a master class on making it ...

What you need:

Wire wicker basket, you can use an old one or even weave it yourself
Sphagnum is peat moss, it is used in gardening and construction, you can find and collect it in a swampy forest or purchase it in specialized stores
Latex gloves
Land for planting
Small plastic trash bag
Bucket of water (for soaking moss
Beautiful flowers and plants for planting

Soak the sphagnum fibers in a bucket of water, squeeze out a little and lay out the bottom of the basket.

After you have laid out enough moss, place a piece of plastic on top and make small holes in it to help trap some of the moisture.

Fill in the remaining space with soil to plant the plants.

Start planting your flowers and plants. It seems to me that ampelous petunias or other ampelous flowers will look great in this planter.

We decorate the garden with our own hands. Enjoy)))

wooden planter

For the original hanging pots, you will need 24 bars 15-20 cm long.Laying them in a checkerboard pattern, they form a square box with through holes.

Connect the bars with nails or screws. Ropes are tied to the bars at the corners of the top edge of the planter and a homemade planter is hung on any tree in the garden.

Wooden pots with viols:

Wooden planter similar to hanging swing, "Hold" on itself a whole flowerbed with pansies(viola)

pots made of burlap (tarpaulin, felt)

Thick fabric, such as burlap, is perfect for making pots in rustic style country. All you need to do this: cut out two blanks from the fabric in the form of a semicircle or a square, sew them like a pocket and hang them on the fence.

For hanging, you can use a cloth strip sewn to the top edge of the planter or a wire threaded into the fabric.

Hanging garden planters made of felt

In felt pots, you can put a pot with garden annuals.

New outfit for the watering can.

If you have old watering cans or buckets with basins lying around in your country house, do not throw it away, treat the surface with rust-proof sandpaper and paint them in bright colors. It is fashionable to put pots (or bags with soil) and flowers inside. And these items will turn into fun pots

You can hang them on racks, trees, fences

How to make a hanging flower pot from a plastic container

1. Materials and tools. The plafond itself. Galvanized wire with a diameter of 2 mm from the latest project. Key ring. Round nose pliers and pliers.

2. Prepare three pieces of wire 25 cm long.

3. Using round nose pliers, bend a round eyelet at one end of each wire.

4. At the other end of each wire we make a "P" -shaped bend. After all modifications, the length of the three blanks should be the same.

5. With the help of an awl or the sharp end of scissors, we make three holes with our own hands in the area of the neck of the plafond.

6. Insert "U" -shaped hooks into the holes

7. We put on the wire blanks on the key ring. The pot is ready.

8. We plant the plants. Plants can be varied, but it should be borne in mind that there is no drainage in the pot and, if the plant requires frequent transplantation, in this pot design, it may be difficult to extract the plant.

Planters can be built not only from cans, but also from plastic bottles (The most common raw material... which is always at hand).

Paint the surface of the pots

You can also decorate the pots with twine.
To do this, we need a plastic bucket for ice cream or other products:
and you will also need jute twine

Glue the beginning of the skein together to attach the handle.

And we begin to wrap the twine around the bucket. Make sure that each circle fits snugly against each other, without glueing the twine. When you have reached the bottom of the bucket, the last few circles can be glued, and we also glue the end of the twine well.

Then it remains to make 4 holes and hang the bucket-pots decorated with twine.

Wicker planter for flowers

Braid a flower pot so you can hang it in a simple way imitating macrame.

In order to make a hanging planter, we need about 10 pieces of thick rope, about 90-120 cm long, several large buttons and a metal ring. And decide on the size yourself.

Instructions:

We fold our pieces of rope in half and fasten with a simple loop as shown in the figure:

Then select the two adjacent buttonholes and fasten the adjacent ends with a button as shown. It is better to place buttons at a distance of 5-7 cm from the ring.

(18 estimates, average: 4,08 out of 5)

An unusual planter can bring originality to the interior of the house and emphasize the beauty of the flower planted in it. Making beautiful decorative pots for the garden with your own hands is a snap. Any object, whether it's an old shoe or a leaky one car tire, you can give new life, turning it into a vessel for a flower. The choice of materials is not limited by anything except the master's own imagination, and the result will be made by your home garden unusual and bright.

Materials (edit)

Plastic is an inexpensive and affordable material from which both flower pots and planters are made. For greater safety and overheating in the sun, it is recommended to choose bright hues for planters made of plastic. Plastic products good because they are easy to decorate with any decorative elements.
Clay is traditional material, from which pots and pots have been created for many thousands of years, and the plasticity of the material allows you to create the most various options and shapes. The disadvantages of clay are that it is difficult to make additional holes for drainage, and also not always such a capacity allows the plant to develop naturally.
The stone is most convenient for outdoor decoration options. This material is environmentally friendly and durable.
Wooden planters are a very unusual and attractive choice. In such containers, the roots do not dry out and retain heat well. However, natural material has a very limited lifespan, over time, pests start in it, the tree rots and decomposes.
Metal planters are suitable for strict interiors... It is a very dense material with high thermal conductivity, therefore it is recommended to use metal in combination with other materials with insulating properties.
Hanging pots in macrame style are woven of nylon thread. These pots are cheap, exclusive, in perfect harmony with any interior style and do not take up much space.
For plants that need constant monitoring of the liquid level, glass containers are well suited.

It must be remembered that the planter does not have special holes in the bottom, from where water should pour out, as in flower pots. So that the roots of the plant do not rot, it is necessary to drain the water regularly.

Whatever material is chosen for the product, first of all, they must be resistant to high humidity and sudden changes in temperature.

The master classes below describe some ideas on how to make a flower pot with your own hands.

Cement planter

This decorative cement planter will be not only original, but also very durable. Make a planter with your own hands can be done in different ways.

Option 1

Materials:

Cement;
An old curtain, tablecloth, or any cloth of a suitable size;
A vessel for creating a shape;
Water;
Bucket;
Perforator or drill attachment in the form of a "mixer";
Paint of the required color.

Making a planter out of cement is very simple... First of all, you need to make a cement mixture. To determine how much mix you need, place the fabric in an empty bucket and mark on the wall how much space it takes up. Along the edges of the mark, you need to pour water for the future solution, and then gradually add cement to the water, stirring it with a "mixer". As a result, a mixture should be obtained that resembles liquid sour cream in consistency.

The whole fabric should be placed in the finished mixture and left for several minutes until it is completely impregnated. After you pull out the fabric, you need to make sure there are no dry areas on it.

Hang a cloth soaked in cement mortar on the container chosen for the form, straighten the material and leave to dry until the mortar has completely solidified. Then the product can be removed from the mold and given the desired color. Special paints for concrete will be more durable.

Option 2

Materials:

Bricks;
Cement;
Sand;
Two plastic containers of different sizes;
Drill attachment "mixer" or perforator for mixing;
Mixing container (bucket, basin or saucepan).

For less sticking cement mix, need to grease plastic containers vegetable oil ... The smaller one is outside, the larger one is inside.

Then you need to do cement mortar... Gradually adding cement and sand to the water, stir the future mixture until the consistency becomes similar to liquid sour cream. Ready mix pour into a large plastic container, and put a smaller one inside. The thickness of the walls of the future pots or pot depends on the difference between the volumes of the containers.

Put a load inside a smaller container: bricks, rubble or any other weighting object, and then leave the product to dry. Depending on the volume, the cement slurry will dry out from two or more days.

After complete solidification, you need to cut the plastic and remove it from the product.

It will look very good DIY cement planter for the garden, since such products look good in large sizes. However, small pots, despite their bulkiness, look very original in the home interior.

If you wish, you can paint finished work acrylic paints, paint for concrete or other decorative elements.

Gallery: unusual pots for flowers (25 photos)

Plaster pot

Materials:

Water;
Gypsum;
Two plastic containers of different sizes.

Plaster pots production technology similar to making a planter out of cement... Into oiled large capacity a gypsum mixture is poured, mixed in a ratio of 2: 1. A smaller one is placed inside the solution, the desired level is set with the load, and then the product must be left until completely dry.

Birdcage planter

The old birdcage is very beautiful and original version for pots. Plants decorated in it look very unusual. The advantages of using a cage are that it can be placed on a windowsill or hung in any convenient place.

Materials:

Bird's cage;
Acrylic paints;
Gloves;
Brush.

Make such a planter extremely simple... The washed and dried cage should be covered with paint. In order not to get very dirty with paints, you must first paint the cage from the inside, and then outside. The shade of the paint should be in harmony with the colors of the interior.

After the paint has completely dried, you can put several flower pots... Birdcage planters work best climbing plants that can twine around the rods.

Hanging multi-tiered planter made of wood

The best option for a decorative planter for an apartment is hanging wooden planter... Due to the fact that there are several tiers in the product, flower pots will not take up much space. Making a wooden hanging planter with your own hands does not require a lot of time and money, and the result will perfectly fit into any interior.

Materials:

Cut as many squares from a wooden plate as you plan to arrange in tiers in a future product ... In order to determine the size, need to:

Turn the pot upside down and place it on a wooden plate.
Outline the odds of the pot. Using a ruler, stepping back five centimeters from the edges of the circle, draw a square.
Cut out the squares along the contour.

Then you need cut holes for pots in the finished squares... For this

With a drill, the diameter of which does not exceed one centimeter, you need to drill holes for the rope in the corners of the squares.

Using sandpaper, sand the wood, smoothing out all internal and external irregularities and protrusions. Then paint the plates with wood varnish or paint... If desired, the pots can also be painted so that they are all in the same color scheme.

To assemble wooden squares, you need to cut 4 ropes, 180 centimeters each.

The ropes must be fastened to a strong knot in the corner holes of one of the squares. It will be Bottom part pots.
Having measured about 25-30 centimeters from the beginning of the stand, you need to tie one more knot on each of the ropes, and then string the second tier on them. It is important to make sure that all the nodes are even, and the second square is strictly horizontal above the first.
Repeat these steps with the rest of the plates.

The wooden flower pot is ready and you can plant the plants. The advantage of this design is that when watering, water will flow from the upper plant to the lower one, so a stand is required only for the lower pot. To prevent the pot from falling if someone accidentally hooks it, you can glue it to the stand with superglue.

If you put absorbent filters on the bottom of the pots, then of them the earth will not spill out, which, however, will not interfere with watering the plants.

Garden pots from twigs

A beautiful planter decorated with sticks or branches will give a natural and harmonious look to the garden in the country. Such a planter will hide a faceless plastic pot, creating an atmosphere of natural nature in the garden.

Materials:

Technique for making garden pots

The sticks must be cut into pieces of the same size. The length of the blanks depends on the height of the plastic pot, and their number depends on its diameter.
The branches need to be tied together both above and below. To do this, on each branch you need to knot two knots, continuing until you get a single canvas.
Burlap is wrapped around and inside the pot. You can fix it with super glue or sew it on tightly.
A blank made of wood must be wrapped around the pot with the plant, and the edges of the ropes must be tied together, fixed with glue and cut off the excess.

Cache-pot for a summer residence

You can show your imagination in the design of garden pots. You can make a planter for flowers with your own hands literally from any subject, which has already outlived its term. Garden flowers in a bucket and a multi-tiered planter from an old chest of drawers with drawers... Do-it-yourself hanging flower pots for the garden can be made from an old hat, broken dishes, unnecessary shoes or a garden watering can.

No more space on the windowsill? This method will be interesting for those who cannot attach their favorite flowerpots even on the floor!

I really like the idea vertical gardening ... And all because this way helps to save space when there is a lack of space and frees up window sills and other horizontal surfaces from green spaces, and it also looks unusual, stylish and very beautiful.

And today the editorial office "So simple!" invites you to find out interesting ideas how to do beautiful hanging flower pots using simple and affordable materials at hand. Now this is not a balcony, but a real garden of Babylon!

DIY hanging planter

And, perhaps, I'll start with macrame techniques, which, in my opinion, is most suitable for creating hanging planters.
Planters in this technique can be either very simple, which can be made in literally 10-15 minutes with your own hands, or complex - the result of many hours of work.

Therefore, I propose to practice first on the lighter ones, honing your skills, and then move on to more complex ones.
Hanging pots made of metal baskets can be immediately covered with substrate, but in order to prevent moisture from passing through, you need to lay coconut fiber on the bottom, and this will only improve appearance pots.
Great idea for crochet lovers!
Hanging planter made of straws suitable for the interior with innovative touches. Just grab a pack of neon cocktail straws, a strong string, and get started. And even 15 minutes will be enough for this!
Old hoops, good glue, an unnecessary bowl - and in 20 minutes you are the owner of such an unusual and very stylish planter.
To do this, place a half of the hoop vertically, put a bowl horizontally inside and mark the points of contact on the hoop. Glue is applied to them, a bowl is placed and held until the glue hardens.
For making hanging planters You can use a wide variety of materials available in the house: baskets, buckets, bottles and even old balls!
And here are some simple master classes on the technique of weaving macrame.

I am delighted with these options!
The tree also gives a fairly wide range of actions, a variety of shapes and colors. Just choose what you like best and create!

And this is not even a flowerpot, but a real shelf for flowers! Arm yourself with the old cutting board and strong threads, and so that the flowerpots do not fall and the board does not slip out, make small grooves along the edges of the board or fix the thread with a drop of glue.

As for me, this is an incredibly simple and neat idea at the same time!

This hanging planter will wonderfully complement your home interior... It is done quickly and easily, it will not take a lot of money for materials either.

To see the process itself weaving pots in the macrame technique, I suggest watching this video.

And this - great idea hanging planter for orchids! A decent result, while everything is quite simple and easy, isn't it?

I also suggest that you familiarize yourself with 6 great ideas

Flower decoration of both interiors and landscapes is in demand among many people. They are successfully used by designers to implement their projects. For a more harmonious fit, they use do-it-yourself flower pots, which they create at master classes according to their sketches. But not only they use such techniques, ordinary people successfully come up with complex structures from what is "at hand".

Types of pots by material

The choice of hanging decorations should be based on the location, the permissible weight per support, the amount of water consumed by the plant and temperature regime. Materials are as follows:

There is a large assortment on the market, but some people prefer to make outdoor hanging flower pots with their own hands and admire their creation. Hangers for pots are made of chains, ropes, metal rods and from cuts of fabric, twine and yarn using the macrame technique.

Cage, chandelier or wooden boxes

The frameless hanging planter is formed directly from coconut fiber. The roots of the plant with a lump of soil are wrapped with a piece of polyethylene, then fiber is wrapped over it. Everything is fixed at the base of the plant and the suspensions are placed in the chosen place. For the base frame, you can take a basket made of wire, metal rods or vines. To make it yourself, you can use the following materials:

Rigid wire.
Pieces of reinforced-plastic pipes.
Waste plastic arches from the greenhouse.
Willow or newspaper vines.
Wooden planks.
Or what the fantasy tells.