How to clear a blockage in a pipe in the bathroom - ways and means. How to easily and quickly eliminate blockages in the bathroom: methods and instructions

Every day in the bathroom at least once they are engaged in water procedures. Gradually, various debris accumulates inside the pipelines and you have to think about how to clear the blockage in the bathroom. There are a lot of options due to which the siphon or other water communications are clogged: human and animal hair, pieces of rags, fat, various pollution pipe systems. Over time, the liquid leaves more and more slowly and a bad smell appears that the sink or bath emits. Something needs to be done about this.

What can cause blockages?

The most serious reason why a sink or bath is clogged is an error during pipe installation. When making repairs, the "craftsmen" are mistaken with the angle of installation of sewer pipes, which, in turn, contributes to the occurrence of traffic jams. Cleaning in this case is possible, but meaningless. Troubleshooting must begin with the dismantling of old pipes and installing them again.

The second more likely option is carelessness and neglect of preventive measures by the owners. Various objects, hair and debris can easily clog the drain. Even with a small blockage, it is recommended to get rid of it so that the situation does not worsen even more. So, how to clear a blockage in the bathroom?

Ways to eliminate blockages

Mechanical Tool #1: Plunger

If the hole near the drain is clogged, then we take an object that most people have - a plunger. Then you should take a rag or cork and close the top hole to drain the water so that there is no air passage. Then we lubricate the rim of the plunger with petroleum jelly, so we will ensure a tighter fit. We put the plunger on the drain, sharply and intensively begin to drive out the pollution. It is quite possible that it will not work the first time.

Mechanical Remedy #2: Hot Water Plunger

If the previous method did not provide proper cleaning, then add to it hot water. We fill a third of the bath with water, pump it into the pipeline with a plunger, and then pull it out sharply. Continue until the drain is completely clear.

Mechanical #3: Rope

Doesn't take a plunger or hot water. What to do? Remove blockage in the bathroom with a cable. With this tool, you can remove serious blockages. But keep in mind that it is possible to break through thin plastic pipes if you are not careful.

Building a rope at home is quite easy. To do this, you need to get a flexible metal wire. Then bend one of its ends in the form of a small hook, and wind the fabric to the second, making a handle.

Stick the fixture inside the pipe to the expected clogged place and push the debris. After removing the main part of the blockage with a cable, pull out the "fishing rod" with the remnants of pollution. Rinse the container at the end hot water.

Chemicals

In some cases it is appropriate to use chemicals if the tub or sink is clogged. The stores sell a large amount of chemicals in the form of a gel, powder, liquid or foam, which can remove all the bad things that are stuck in the pipeline in a few minutes. Organic contaminants are ideal for chemical removal.

Be sure to read the instructions included with the kit before use.
Use funds personal protection to avoid unwanted consequences.
Buy products that dissolve the hairline.

Folk method number 1: boiling water

Folk methods are no less popular and give good results. But, alas, removing a strong blockage in the sink or bath with the help of them is impossible. If pipes or drains have accumulated a large amount of fat, then this can be corrected with boiling water. Just pour boiling water into the hole until the water begins to flow better.

Folk method number 2: vinegar and soda

Baking soda and vinegar react with each other, so they are able to remove more complex pipe contaminants. At the very beginning, soda is poured into a glass, after which it is sent straight to the drain. Next, pour vinegar into a glass and pour it down the drain and plug it with a cork. Foam will begin to form if the vinegar and soda react. After 15-20 minutes, rinse with hot water to wash off the remaining vinegar and soda.

Folk method number 3: lemon

Folk remedies are beneficial and convenient to use at home, but they do not always give the desired effect. But lemon will help get rid of light pipe contamination. Squeeze the juice from one fruit down the drain and wait an hour or two. As time passes, the sink or tub is rinsed with hot water.

How to clean a siphon?

The siphon needs to be cleaned periodically, but if this is not done on time, problems may appear at the most inopportune moment. It is recommended to flush the siphon regularly to prevent the sink from emitting a bad smell. Now let's move on to cleaning.

Get unnecessary soft cloth and place a water container under the siphon. Open the fasteners and remove the flask. After all the water has drained out, carefully clean the siphon. Then rinse the device and mount it back. Also, be sure to position the nozzle so that it does not rest on the flask. Do not rush to remove the basin, first open the water. If nothing flows, then the siphon is installed correctly.

Don't brush aside preventive measures acceptance. Doing them regularly will save you a lot of time in the future.
To collect any debris, install a metal mesh.
In some cases, it will not be superfluous to use compounds that prevent the appearance of blockages.

Now it became clear how to clear the blockage in the bathroom. After all, anyone agrees that it is pleasant and comfortable to be in a clean bath.

Blockages periodically form even in the most tidy owners. The accumulation of mechanical particles, grease and other debris in the sewer pipe leads to the formation of a plug that prevents the water from draining. Having an idea of how to clear a blockage in the bathroom, it is possible to fix the problem easily and in a short time.

Causes of pollution

Even good pipes get clogged from time to time.

The drain pipe in the bathroom is clogged due to the fact that they settle on its inner surface:

Threads from clothes when water is drained into the bathing container after hand wash and rinses.
Hair of any length.
Fur of pets.
body fat.
Remnants. No wonder, after all hygiene products have a fatty base, therefore, it also takes part in the formation of blockages.

As a result, the pipe from the inside is overgrown with a layer of debris, which eventually narrows the clearance in the pipe. A dense cork is formed. Once it completely covers the cavity and makes it impossible to drain the water, and hence the use of the bathroom.

Possible Solutions

Bathroom clogs are more difficult to clear than sinks.

Exist different ways problem solving. In some cases, special plumbing fixtures help, in others, improvised home remedies, and in others, household chemicals from the store.

Folk remedies

First you need to scoop out dirty water from the bath, pour half a pack into the drain baking soda, and after 10 minutes, pour 100 ml of vinegar into the hole. If there is no result after an hour, add a few liters of boiling water. You can do it differently: first pour in vinegar, and then boiling water with dissolved soda.

Method 1: water and baking soda with vinegar

Really clean up heavy blockage hot water. If this was not enough, it is recommended to connect vinegar, baking soda, and table salt.

Method 2: water with washing powder and soda with salt

Pour half a glass of salt and the same amount of soda into the drain and pour two to three liters of boiling water. After an hour, add a handful of washing powder and turn on the hot water.

As a rule, these options allow you to cope when the main cause of blockage is fat.

How to clean a blockage in the bathroom with a cable

A plumbing cable is a thick wire twisted in a spiral. For convenient use, one of its two ends is equipped with a handle made of wood or plastic.

Pipes are cleaned as follows:

Insert the end of the spiral into the drain hole.
One person rotates the cable by the handle with rotational movements, while the other at the same time pushes it deep into the pipe so that it goes through its bends as much as possible.
As soon as it becomes noticeable that the voltage in the pipes subsides, pull the cable several times and remove it.

There are devices with a hook at the end. They allow, having stumbled upon a blockage, to turn the wire, hook and remove the plug. This is convenient if it is not formed too deeply.

How to clear a blockage in the bathroom with a plunger

Before starting work with a plunger, close the overflow hole

When a washcloth made of hair became the cause of poor drainage in the bath, a plunger can help out. It perfectly cleans pipes from other types of mechanical dirt. Necessary:

If the bath is dry, add some water to it.
Place the plunger over the drain hole so that the rubber nozzle completely covers it.
Firmly take the plunger by the handle and move it up and down with force, without lifting the nozzles from the bottom of the bath. It's about the same as pumping hand pump bicycle wheel.

One minute of intensive work is enough to move the blockage from its place. When the dirt floats, you will have to pump the drain a little more with a plunger for the best result. Floating debris must be thrown into a bucket so that it does not get sucked in again. After that, it remains only to wash the bath.

How to get rid of the problem with household chemicals

Compositions for cleaning drain pipes can be bought for moderate money at a hardware store or hypermarket department. They give excellent results, and in terms of efficiency they are comparable to mechanical devices.

Mole

The composition has been used in liquid form for decades, and today it is also available in the form of a gel and powder. "Mole" is an inorganic alkali enriched with other active additives that dissolve dense debris.

Tiret Turbo Pipe Cleaner

It is a highly effective gel for quick removal blockages. It has a thick consistency, thanks to which it quickly penetrates deep into, eliminating the blockage in 5 minutes. The composition of Tiret Turbo includes antibacterial elements and fragrances. It is suitable for metal and plastic pipes.

Deboucher

Another powerful remedy for debris and greasy plugs in pipes. It contains chemically active components that ensure a quick and effective action of the product. The instructions say that you can clear the blockage after one hour, but this happens much faster.

When using chemical compounds, it is important to remember the means and rules of personal safety so that the procedure does not harm health. detailed information on this topic is always available on the packaging or in a paper application. In extreme cases (for example, if the font is too small), it is not difficult to find it on the Internet. As for general recommendations, they boil down to using:

rubber (household) gloves, which can be replaced with a double plastic bag worn on the hand;
medical mask for respiratory protection.

How to clear a blockage in a bathtub siphon

In some cases, to eliminate the blockage in the bathroom, you need to clean the siphon. It is done like this:

They cover the floor with a soft cloth and put an empty basin.
The lock nut is removed, followed by the flask, after which the water with debris elements will begin to drain.
The empty siphon is washed by hand, carefully cleaning the walls from plaque.

Having assembled the structure, it should be installed back in such a way that the drain pipe does not literally lie on the flask. If you ignore this, the water seal will break. To check the degree of tightness of the joints, as well as connections, open the tap and fill the water seal with water.

Anti-clogging magneto-mechanical brush HELPPIK (HELPPIK)

It has been on the market since 2010 and has a reputation for being efficient and a simple remedy, allowing you to get the trash out of the siphon. This is a stick made of plastic, with notches and built-in magnets. Its length is 38 cm, and its diameter is about 5 mm. The ruff is inserted into the hole of the siphon grate and scrolled. In 10 seconds, he will collect the blockage. The stick is easy to remove and does not slip. The presence of magnetic elements allows you to get small metal objects. The ease of use of the device and its functionality are confirmed by domestic housewives.

How to clear a strong blockage

In this case, it is recommended to start with a cable and a plunger, combining their use with powerful means household chemicals. If there is no effect, then the cork is hard, large and deep. Such a strong blockage can only be cleaned by professional plumbers.

They can be invited by contacting management company or local housing office. When the matter is urgent (masters can come the next day), it is easier to contact a specialized commercial company. Often, those who are engaged in the installation and dismantling of plumbing offer services for cleaning pipes.

Problem Prevention

Hot water will help get rid of body fat

One way or another, you can always deal with a blockage, but every time it is extra trouble and expense. To make your life easier, you should pay attention to prevention. For this you need:

Equip the drain hole of the bathtub with a device for collecting hair, threads and other mechanical debris. Items can be purchased at the store. They represent different variants plastic traps.
Periodically pour a little of any store-bought liquid or pipe cleaning gel into the drain.
At the slightest suspicion of a blockage (for example, when the water does not leave the bath as quickly as it should), use a plunger.

Compliance simple rules It will help to get rid of the problem of blockages, as well as ensure maximum patency of the sewer.

The above cleaning methods are not difficult for an adult, even if he is not a professional plumber. It is important to remember that normal work drain pipe completely depends on the prevention of plaque and dirt, as well as on the elimination of blockages at an early stage of their formation.

A blockage in a pipe, namely in a bathtub or sink, is a very unpleasant phenomenon that brings severe discomfort. The drain is clogged throughput goes down and the water doesn't go away. In addition, a disgusting smell soon appears, the threat of flooding the premises or a pipe break.

To avoid this, it is important to eliminate the blockage in the early stages of appearance. As soon as you notice that the water began to leave longer than usual, you can carry out the procedure. In this article, we will learn how to clear a blockage in the bathroom or kitchen at home.

Causes of blockages

The reason for blockages is that hair, small debris, animal hair, spools and threads from clothes, soap residue and much more get into the pipe and drain. These components form a dense lump that prevents the passage of water. To clean the pipe, you need to remove this debris. In this case, you can eliminate the blockage in the bathroom at home.

In old metal pipes ah, over time, a mineral build-up forms. In this case, cleaning can only be carried out by an expert.

But such a problem is rare and mainly in old houses where cast-iron and steel pipes. A modern pipeline is made mainly of polypropylene, plastic and PVC, which is not subject to corrosion and deposits on the walls of products.

Causes can also be improper sewerage and insufficient pipe slope, prolonged use of the pipeline and wear of devices. In this case, it is necessary to replace old pipes, wiring and risers, siphon and other elements or eliminate defects made during the installation of the sewer.

However, most often the cause of problems is the accumulation of debris in the pipes, which must be eliminated. Let's find out how to do it.

How to clear a blockage with a plunger or cable

Plunger cleaning is the most common method used to clear blockages. The plunger exerts double pressure on the blockage, causing the debris inside the pipe to collapse. Before the procedure, tightly close the overflow hole, if any.

Then press the rubber part of the plunger to the drain hole, press on the device and start sharp, intensive up and down movements. Make sure that the water in the sink or tub does not rise above the rubber valve during the process. Then abruptly tear off the plunger and repeat the procedure several times.

To ensure a tighter fit of the plunger to the drain, you can pre-lubricate the rim of the device with petroleum jelly. If it was not possible to completely remove dirt and debris, the drain is cleaned with a plunger and boiling water.

To do this, fill a third of the sink or tub with hot water. Then we insert the plunger and pump the pipe in the bathroom, pull it out sharply and repeat the procedure several times until the drain is completely clear.

Instead of a plunger, you can use a vacuum cleaner with an air blowing function. The pipe of the device is attached to the blow hole, and the remaining end is wrapped with a cloth or soft material. This end is inserted into the drain hole and the vacuum cleaner is turned on.

The air pressure will push through or break the blockage. By the way, the air blowing function can also be used for outerwear after washing.

A strong, deep and serious blockage will help eliminate the pipe cleaning cable. The procedure must be carried out carefully and carefully, otherwise the plastic pipes may be damaged. To clean the blockage in the bathroom with a cable, first remove the siphon.

Then take the device by the handle, and point the other end into the pipe. Push the cable as far as you can and start turning the cable clockwise.

When the cable reaches the gap, increase and speed up the rotation of the cable. He will push the trash further. After removing the bulk of the blockages, pull out the product with the rest of the dirt. Rotate the cable only clockwise, otherwise it may break!

By the way, you can easily make a cable yourself. To do this, take a flexible metal wire, on one side of which wind the fabric and make a handle. Bend the other end into a small hook.

Cleaning chemicals

Today, in stores and departments of household chemicals, you will find various products for cleaning pipes and blockages in the bathroom or sink. These are gels, powders, liquids and foams. Choose compounds that dissolve hair well and are suitable for your type of pipes.

By the way, many products are used not only for cleaning, but also for the prevention of blockages. We offer an overview of the most popular drugs.

Mole is the cheapest and available remedy. It removes blockages and bad smell effective, but slow, acts from 1.5 hours;
Sanox is also an inexpensive drug that is suitable for every type of pipe. Delicately eliminates blockages and unpleasant odors, acts from one hour. Has a lid-lock "from children";
Chirton is a cheap remedy with a quick action of 15-20 minutes. Does not form dust and does not contain chlorine, but has a pungent odor. Released in the form of a gel and powder;
Tiret is a popular preparation for plastic and metal pipes, which is characterized by high cost and average efficiency. The action time is up to half an hour;
Deboucher is an effective gel in a convenient package with a blocking cap, suitable for plastic and polypropylene. Due to the chlorine content, it cannot be used for aluminum pipes. Valid for an hour;
Flup is an aggressive granular product with high efficiency without a strong odor. Features easy and quick cleaning of blockages;
Bagi Pothan is an expensive but fast-acting granular remedy that works instantly in 3-5 minutes. characterizes high efficiency, economical consumption and convenient packaging. Not suitable for worn pipes and for the prevention of blockages.

Majority chemical compositions have a pungent odor and aggressive action, so it is recommended to clean the pipes using protective equipment. Be sure to wear gloves and, if necessary, a respirator and eye protection. Carry out the cleaning procedure strictly according to the instructions and keep the product away from children.

Folk cleaning methods

Lemon removes light dirt. To do this, take one fruit and squeeze lemon juice into the drain hole. After two hours, rinse the tub or sink with hot water;
Grease and minor impurities in the pipes are removed with boiling water. Pour boiling water down the drain until the water begins to flow;
Cleaning with soda and vinegar is effective and efficient. The two components, when reacting with each other, quickly eliminate complex contaminants. First, a glass of soda is poured into the drain, and then a glass of vinegar is poured and the hole is plugged with a cork for 20-30 minutes. After that, the pipe is washed with boiling water;
You can clean the blockage not only with soda and vinegar, but also with one soda. Soda cleans and disinfects pipes by forming alkaline environment. First, pour a liter of boiling water into the drain and clean it with a plunger after 15 minutes. Remove the dirt and pour a glass of soda into the hole, pour three more glasses of boiling water. Repeat if necessary;
Using salt and baking soda is another way to clear a bathroom clog. To do this, pour half of both components into the hole, pour boiling water. Leave for 8 hours, periodically pouring new boiling water. Then rinse the tub or sink with hot water.

It is important to regularly clean the drain of hair. After each shampooing, be sure to collect and clean the hair. Use your plumbing properly so your tub or sink doesn't get clogged!

Do not clean in kitchen sink vegetables, as waste is easy and a short time clog the drain hole. Do not comb animals in the bathroom and do not wash hair, threads into the drain hole. Do not wash your shoes directly in the bathroom, as dirt and sand will also clog the pipe.

To prevent blockages, it is sometimes recommended to pour boiling water into the drain hole, as it reliably eliminates soap and grease. Clean the siphon regularly. To do this, place a bowl, bucket or other container under the pipe. Open the fasteners and remove the flask. Wait for the water to drain and carefully clean the siphon with a soft cloth and water. Then put the device back.

Sewer systems can become clogged not only in multi-apartment buildings, but also in private homes. Inner side pipes accumulate fat deposits, soap deposits and other debris, which serves as a barrier to the passage of water. There are many ways to clear a blockage in the bathroom or kitchen, as well as minimize the likelihood of a similar problem in the future.

Causes of blockages

Pipes can become clogged the following reasons:

Effective cleaning methods

To eliminate blockage in the bathroom, you can use one of the existing methods:

Pressure cleaning - in this case, a classic plunger is used.
Mechanical - debris is removed by disassembling the siphon or using a plumbing cable.
Chemical - corks are dissolved with industrial facilities containing harsh chemicals.
Thermal - you can eliminate the blockage with the help of hot water pressure.

The choice of method depends on the material from which the pipes are made.. Plastic products can be damaged by boiling water or a cable, and the use chemicals can only be carried out in strict compliance with all manufacturer's recommendations.

Cleaning with a plunger

The plunger remains easy to use, affordable and popular when it comes to clearing a blockage in a bathroom, toilet or sink. This device is in the form of a handle (plastic or wooden), one side of which has a rubber nozzle. Under the influence of its pressure, the debris accumulated in the pipes begins to move along them and collapse. With the help of a plunger, as a rule, it is possible to get rid of blockages, they are freely brought out and removed.

But to clean the pipes like this simple fixture, you need to use it correctly:

When using a plunger, it is extremely important that the water level in the sink or bathtub does not exceed the rubber valve. To remove the remnants of blockages and achieve the best result, a repeated procedure will allow.

Household chemicals

There are many ways to clean the drain in the bathtub and sink, but one of the most popular is the use of household chemicals. With its help, it is possible to effectively break through all blockages without replacing parts. The advantage of these tools is that they do all the work themselves, a person does not need to make physical efforts.

These products are characterized by a different consistency: foam, gel, powder and liquid, they can also cost in different ways. The principle of their use is simple: the required amount of cleaning agent is poured or poured into the drain and left for a certain time, which should be indicated on the label. After this time, the water must be turned on, which will ensure proper flushing of the pipes.

The use of any chemicals requires attention. Their contact with the skin or mucous membranes is unacceptable (all work must be carried out with protective gloves). In addition, it is not recommended to allow the product to come into contact with chrome-plated surfaces.

In order not to remove blockages, you should regularly carry out preventive procedures using household chemicals: a small amount of chemical liquid or gel is poured into the drain hole, after which hot water is turned on to flush the pipes.

Siphon cleaning

Replacing parts is a last resort, in most cases cleaning the siphon is sufficient. The algorithm of actions should be as follows:

This method of cleaning is recommended to be carried out regularly for prevention. Rinsing the siphon once every 2-3 months will minimize the formation of fetid deposits on its inner surface, which cause bad smell in room.

Using boiling water

If the blockage in the sink is taken by surprise, then you can use a simple and often effective way pipe cleaning - boiling water. The effectiveness of the method lies in the fact that, under the influence of high temperatures, dissolve fat, which causes most blockages.

First of all, it is necessary to assume the scale of the problem: if water has accumulated in one place, then the blockage is local in nature, and when water is in all drains, then the blockage is considered to be global. The solution to this problem is to clean the entire sewerage system, and with a local one, it is enough to clean one pipe.

You can use boiling water only if the plumbing system is made of metal pipes. The principle of operation is very simple: you need to heat up to 4 liters of water, and then send it to the drain. If necessary, cleaning is repeated. To achieve the desired effect, it is recommended to use a plunger or brush.

You should refrain from boiling water if water accumulates on the surface of the bathtub or sink. It should be taken into account that boiling water simply cannot affect trouble spot. In addition, you should be careful not to scald. For plastic pipes, you can use hot, but not boiling water.

metal cable

The debris accumulated deep in the pipes is unlikely to be eliminated with the help of household chemicals, boiling water or a plunger. In this case, it is recommended to resort to the use of a plumbing cable. This cable is characterized by the appearance of a thick twisted wire, one side of which is equipped with a drill, and the other with a handle. The length of the cable reaches no more than 10 meters, which is quite enough to eliminate the blockage. It should be borne in mind that this device is only suitable for dealing with contamination of metal pipes.

To successfully carry out cleaning, you should use the following recommendations:

The use of folk remedies

Time-tested folk remedies will help remove blockages in sewer pipes. Such procedures for removing blockages are easy to perform, environmentally friendly and do not require large financial costs, since ordinary soda is the active ingredient. Why not be convinced of the effectiveness of the product on your own experience, if the bath is clogged.

Let's take a closer look at how to clean blockages at home:

Table vinegar and soda should be prepared in proportions of 1: 1, but not more than one full glass of each component.
First you need to pour soda into the drain hole, and then pour the vinegar solution on top.
The drain is closed with a stopper and left to rest for at least 3 hours.
After this time, the pipes must be thoroughly rinsed with boiling water.

What to do if the pipe in the bathroom is clogged, many sources will tell you. Based on the reviews of household members, fragrant lemon is an effective folk remedy. To eliminate the blockage, you will need to purchase several large citrus fruits and squeeze the juice out of them into the drain hole (it is important that the bones do not get there). Leave at rest for at least 1 hour, after which you can start using the bathroom or sink in the usual way.

Sewer blockage is a very unpleasant phenomenon when water does not go down the drain, and a disgusting smell is felt in the bathroom.

There are many ways to fix the situation, although some housewives do not even know how to clear the blockage in the bathroom with folk remedies.

Usually blockages are formed due to improper use of sewers. Most often, pipes become clogged due to hair, animal hair, small debris and spools from clothes. All this turns into one big lump, because of which water cannot pass through the pipe.

plunger

This is a simple thing that is widely used to clear sewer blockages and.

It is believed that this method can be used as a preventive measure. The more often the hostess uses the plunger, the less often a blockage will occur in the bathroom.

Instruction:

The plunger must be installed so that the rubber nozzle completely covers the drain hole.

Before cleaning, it is worth filling the bathroom with a little water.

The plunger handle must be alternately lifted up several times, and then lowered down. Due to this, air will suddenly enter the drain hole and push through the resulting blockage. To wash it off, you just need to turn on the water.

Household chemicals

In fact, you can clear a blockage in the bathroom without a plunger. After all, you can just buy modern cleaning products.

If earlier only soda was used for this, today it is enough to visit the household chemicals department and choose the packaging you like.

It is best to choose the product, the instructions of which indicate that it dissolves hair and wool.

You can choose not only a special cleaning powder, but also a liquid product.

It is necessary to clarify in the instructions that the selected product is really suitable for a particular type of sewer pipes.

The agent must be carefully poured or poured into the drain hole. If this is a special powder, you should also pour a glass of warm water.

To definitely remove the blockage, you need to not use the bathroom for some time.

After a certain period of time specified in the instructions, it is necessary to turn on hot water in order to rinse well sewer pipes and take out the trash.

Folk remedies

In the old days, every self-respecting housewife knew exactly how to clean the blockage in the bathroom with soda and vinegar. Today for use folk remedies women come running infrequently. However, at home, blockages can be easily removed in two ways:

In the drain hole of the bathroom, where there is no water, you need to pour half a pack of soda. Hot water should be turned on after 5 minutes.

Pour 4 tablespoons of soda into the drain and pour half a glass of vinegar there.

Then the hole must be covered with something so as not to interfere chemical reaction. After a while, you can turn on hot water. The easiest way to get rid of debris is with strong pressure.

Such methods are quite effective, but they can adversely affect the condition of the pipes.

Cable

A plumbing cable is a thick twisted wire coiled into a small spiral. For convenient rotation, a handle with a wooden or plastic nozzle is provided at the end.

Such a device is actively used to remove sewer blockages. And we are talking mainly about metal pipes.

Application:

The end of the cable must be carefully inserted into the drain hole.

It is best to do the work together. So, one person slowly rotates the handle, while the other gently pushes the cable forward.

When the cable is twisted, accumulated debris is removed from the pipes, that is, the blockage is destroyed.

As soon as the tension in the pipes decreases, you need to pull the cable back and forth several times.

The cable is carefully removed, washed and stored.

If the procedure was ineffective, it is repeated.

Before removing the blockage, you need to pay attention to the tension of the cable. Lack of tension can damage the cable.

Siphon cleaning

The male owners do not think long about how to clear the blockage in the bathroom. As a rule, they immediately begin to clean the siphon. This procedure allows you to get rid of debris accumulated in the pipes and an unpleasant smell in the room.

Cleaning procedure:

On the floor directly under the siphon, you need to lay a rag that absorbs moisture well.

A basin should be placed on top of the fabric. Such a simple measure will prevent dirty water from getting on the floor.

The lock nut must be unscrewed very carefully. After that, you need to remove the flask.

Immediately after this, the water that formed the water seal will flow into the basin.

The siphon itself should be thoroughly rinsed with water and all plaque removed from the walls.

The entire structure must be installed so that the drain pipe does not rest on the flask. This is very important, otherwise the water seal will be broken. To check the tightness of all connections, you need to open the tap and fill the water seal.

Such cleaning can also act as a preventive measure. For this purpose, the siphon is cleaned every 2-3 months.

How to avoid blockages

Of course, any blockage can be cleared using one of the above methods. However, it is much easier to worry about prevention in time.

It is necessary to install small nets in the drain hole to retain debris.

From time to time, pipe cleaners should be poured into the drain.

A plunger should be used periodically.

Thanks to the observance of all preventive measures, you no longer have to puzzle over how to clean the blockage in the bathroom with a cable or a plunger. Moreover, the bath will always be clean, and the air in the room will be fresh.