Do-it-yourself wooden hanger: ideas, drawing, manufacturing procedure. Making wooden hangers with your own hands Hanger for clothes from branches

An apartment hanger made of wood directly with your own hands is always an original and unique thing, so it’s better not to limit your own imagination. At the same time, for the sake of decorativeness, one should not sacrifice the convenience of the design and its practicality.

Main nuances

Wall, and equally floor, a hanger will be useful in any room. Due to the ease of manufacture, home craftsmen often make them a highlight of the interior when they decorate:

kitchen;
bath;
hallway;
bathroom.

The nursery can also be decorated with a completely unique design for minimal money.

In general, the design of the product under consideration must be developed in such a way that the result meets the following criteria:

conciseness;
simplicity;
sophistication;
strength;
compactness;
cost moderation.

If there is not a lot of space, then it is worth making wall variant. The corner design is ideal for a small sauna or hallway.

A floor hanger is capable of withstanding a serious load, however, as a rule, it is not installed in a bathroom or kitchen. Such models take up a lot of space, and perform few functions.

For towels and a bathrobe (apron), it is much more advisable to hang a small hanger with a pair of hooks there.

The pieces of furniture considered in this article are also distinguished by the way clothes are placed. They, in particular, come with:

hooks;
barbell (under the shoulders).

The first option takes much less space indoors, but in the second it is much more convenient to hang things. They don't wrinkle and dry quickly. Most often, structures made of wood or chipboard are made in residential premises. Metal is more appropriate in a bathroom or kitchen, as it is easier to clean and is not so afraid of dampness.

When choosing a design, care must be taken to ready product fit the general style of the room where they plan to place it.

Yes, for classic interior it is better to create an antique hanger with curly details and a carved edge. Form it accordingly:

dark varnish;
worn effect paint;
decoupage technique;
gilding, etc.

Hooks are selected in a retro style. By the way, in this case, mushroom-shaped handles from old cabinets will perfectly replace them.

simple hanger

Based on the basic model shown in the drawing, it is easy to build a huge number of variations in the most different styles from almost any available material.

You will need to prepare:

jigsaw;
impact drill;
dowel;
self-tapping screws;
hooks;
pencil;
roulette;
spirit level;
screwdriver.

On the basis take a flat board of suitable length. If desired, it is easy to supply:

a shelf for hats with supports-sidewalls;
panels of wooden planks;
compartment for keys;
hooks for bags, accessories and umbrellas.

For a bath or kitchen, take natural wood coniferous species. Suitable for living quarters:

plywood;

It is important that the workpiece is free of visible defects (however, cracks and chips are easy to beat if the product is “antique”).

The length indicated in the diagram is approximate, choose it for yourself based on the needs of your family. It is only necessary to take into account that the hooks should be located after 10-15 cm, and the extreme ones should be installed from the end no closer than 5 cm.

The product is mounted on the wall using hidden loops or directly with dowels through the thickness of the material. In the latter case, the holes are drilled so that the hooks hide them. By the way, it is not at all necessary to buy them in a store, it is easy to make them from old cutlery. Steel forks or spoons bend perfectly and are easily fixed with self-tapping screws.

For a bath for this purpose, you can take cuttings of branches with protruding knots. In this case back side the workpieces are slightly grinded, fixed with glue and additionally with screws from the inside.

Also, the base can, in principle, be made of any shape:

round;
wavy;
trapezoidal.

It is also easy to assemble from several planks. different widths and length, fastening them with common guides.

So that the wall does not rub too much, it must be protected from clothing with a special panel. The simplest option is a piece of plywood covered with foam rubber, and on top: leatherette or silk.

Options

A wild-style hanger is easy to build from any board available on the farm. Its edges are deliberately crooked cut with a jigsaw with a sole set at a 45-degree angle. Then:

the surface is polished with emery;
treated with a piranha type nozzle or a wire brush;
chaotic hammer blows form dents;
cover with stain;
varnish;
screw suitable bronze hooks.

If there are houses welding machine, then it is not difficult to make a design from commercially available forged items. In this case wood panel framed with an iron corner, and selected parts are welded to the latter. Alternatively, the boards are used as a background, or only for a shelf for hats.

Hanger in the nursery

This tree-shaped model is both floor-standing and wall-mounted. For its manufacture they take sheet material. Plywood or chipboard is best.

The procedure here is:

on the surface of the plate with a pencil, draw the contours of a tree with a height suitable for your child;
the figure is cut out with an electric jigsaw, working from the wrong side so as not to damage the laminate;
the edges are sanded with emery and must be dedusted;
primed with any suitable composition and covered with thermal tape;
the product can still be simply painted in a suitable color with phthalic enamel - in this case, the end face is smoothed with wood putty and polished.
the hanger is attached to the wall using ready-made brackets;
a backlight is placed behind it - so it will replace the child's night light.

Wardrobe items are hung, if necessary, on branches.

Clothes hangers are a must-have in every home, as otherwise outerwear quite problematic. In addition, floor hangers are also useful in the bedroom, so as not to put clothes in the closet every evening and not to use chairs or armchairs. But in the store beautiful furniture is quite expensive, so The best decision This is a DIY outdoor clothes rack. After all, from inexpensive materials, you can make original and beautiful hangers that will greatly decorate and make your interior comfortable.

You can make a clothes hanger from almost any material. But if you are going to do it yourself, the choice of material should be approached carefully.

Wood and plywood are best suited for work, these are the most practical and plastic materials that are easy to work with. If products from them are used in the house, then they are guaranteed not to be exposed to moisture and their service life will increase significantly.

Working with metal or plastic at home is quite difficult, so you should not choose these materials. It is worth considering the fact that sometimes there is a significant load on the hanger, so you need to use materials of appropriate strength so that the furniture does not break.

Examples of floor hangers using metal water pipes

When you buy wood or plywood, pay attention to their quality, because this is a guarantee that the hanger will look beautiful. In most cases wooden crafts covered only with stain or varnish, so the texture remains visible on the surface.

Floor hanger in the form of a tree

Do floor hanger It is not difficult, and it does not require many tools and materials. This hanger is made from two sheets of plywood, approximately 70x170 cm in size and 18 mm thick. For manufacturing, you only need glue, a jigsaw and sandpaper. The work itself will also not take much time and you will not find such hangers in any furniture store.

First you need to draw on one of the sheets of plywood the outline of the future product. This can be done simply by transferring the drawing to scale on plywood. The most important thing is that the legs are of sufficient width - about 60 centimeters. This is necessary for stability, since if you make them narrow, then the hanger will fall if you hang heavy winter clothes on it.

In order not to draw a picture on the second sheet of plywood, you need to simply fasten two sheets of plywood with self-tapping screws or clamps before you start cutting. It is best to use the clips, rearranging them as you cut the plywood. Make sure that the sheets do not move and that both workpieces are the same.

To connect the blanks and turn them into a hanger, you need to make two slots. On one blank, you need to make a slot to the middle from the top, and on the second from the bottom. The width of the slot should match the thickness of the plywood.

Both slots with inside you need to process it well with glue, and then put the workpieces one on top of the other. As a result, you will get an original and beautiful floor clothes hanger, which will only have to be sanded and painted.

As you can see, making a floor hanger with your own hands is a simple task even for a beginner. And you can decorate it in any way. You can simply stain, varnish or paint the plywood. If you reduce the size, you get a children's clothes hanger that will decorate any room, especially if it is painted.

Wooden hangers made from natural elements

good design decision are racks made of natural natural materials. More specifically, from a tree trunk. Such a clothes hanger is very easy to manufacture and does not require special tools and materials.

First you need to find a good piece of dry wood, it must be completely dry and free of rot. The type of wood practically does not matter, but it is worth remembering that it is better not to use conifers with a high resin content. Glue can be released from the barrel even after complete drying. It is best to use hardwoods with a well-branched trunk so that there is more room for clothing.

First you need to completely clear the trunk of the bark, cut the lower branches to a height of one meter, and shorten the upper ones so that there are knots on which you can hang clothes. Then you need to completely sand the rack and clean it of dirt, bumps. If the wood is damaged by a bark beetle, then this does not interfere, since it creates quite beautiful pattern, which will perfectly fit into the design of the hanger.

The second stage of work is the stand, since the tree trunk cannot stand on its own. The most important thing to remember here is that the more massive the stand, the more stable the hanger will be. You can make a stand from a thick board, it will the best option for work. The stand itself can be given any shape, it can be a circle, square, triangle and any other geometric or abstract figure.

You can attach the stand to the stand different ways. For example, if Bottom part the wood is quite thick, you can simply screw the board to it with self-tapping screws. The heads of the screws will be at the bottom, so they will not be visible. If the bottom of the tree is relatively thin, then you can fix it in a stand by making a hole in it, it should be no larger than the diameter of the trunk itself. Then just the rack is fixed with glue on the stand - this method is the most reliable.

It is worth remembering one feature of the tree trunk - it has a cone shape. Therefore, it is better to make a hole in the stand smaller than its diameter, and carefully trim the bottom of the tree. Thus, the stand will hold well and there will be no gaps at the junction.

When the wooden hanger is ready, you just need to varnish it, as it is better to preserve the natural color of the tree. But if a light hanger doesn’t suit your design, then you can use stain or dark paint.

original and very practical option floor hanger, which is easy to make, make it in the form of a ladder. Such an accessory is perfect for the bedroom if you do not like to use an armchair or chair back to store clothes in the evening.

For manufacturing, you will need only two bars with a thickness of about 5x5, and a length of 170-180 cm. Also, for the crossbars, you will need three smaller bars, the length of which will be equal to the width of the hanger. All bars are ground or processed by a planer. To make the hanger look beautiful and neat, it is best to connect the parts together with spikes.

Then you just need to cover the hanger with stain and varnish. A convenient and comfortable clothes rack is ready. As you can see, this DIY clothes rack is very simple and it is suitable for a bedroom or a summer house.

Like any wooden piece of furniture, such a clothes stand will look great in almost any interior and you can arrange things on it so that they do not wrinkle. If desired, you can use several clothes hangers that can be hung on the top bar. If during the day the hanger interferes, then you can simply take it and put it upright, as it is light and does not attach to anything.

Other types of floor hangers

Despite the fact that the floor rack for clothes is a fairly simple element of the interior, there are so many ways to make it. It is enough just to show a little imagination and remember that the design must be stable. Otherwise, you can make clothes racks from any available material at hand.

You don't need any special tools to work either. Of course, there are hangers made on lathe made of wood, but they are made by professional carpenters.

Remember that any piece of interior made by you personally will not only be the next step in your skill. If you make something with your own hands, then this thing will be unique and unique.

In addition, by making the elements of the decor yourself, you not only show your individuality, but also save a lot. Since even the simplest clothes racks in the store will cost an order of magnitude more expensive than craft material. And this is another incentive to start making your own, since the products self made are even more expensive.
Floor hanger, one of the most simple tasks. Therefore, you should not buy it in the store, but rather make it yourself.

Click Class

Tell VK

Wall hanger in the hallway - important element storage of things. The layouts of many apartments have narrow corridors, in which it is not always possible to place a full-fledged closet, so the owners are looking for alternative options. I want to keep the design of the apartment, comfort and ease of use.
There can be a lot of variations of hangers from the most standard and simple miniature shelves to futuristic and most unthinkable ideas.

The most popular materials for making hangers are wood and metal.

Forged metal hangers amaze with their beauty and smoothness of forms. They are used in Provence and Art Deco interiors. This version of the hangers is mounted on self-tapping screws, and more often hung on them.

This option of hangers can be attributed to horizontal. Their function is only to store outerwear. Metal hangers often have an aged look, which gives them a picturesque look.

A very interesting option is the combination of forged elements and leatherette or fabric. Looks unusual and luxurious. Such a hanger will decorate any corridor and become its highlight.

The photo shows combinations of materials: wood with fabric and metal with fabric. The functionality and originality of products is preserved. In the first version, the wood gives an array and solidity to the furniture, and in the second, metal facilitates the composition and gives grace.

Hangers made of wood can be combined with a mirror, a shelf for shoes or for head appliances. The photo shows a very compact version hallway.

The hanger can have sections: for short and long top things, which helps prevent dirt on the wall.

A wooden hanger is completed with a shelf and a mirror, also a great option for small hallways.

When choosing a material, it is necessary to focus on its strength, whether the finished product will withstand heavy winter things.

For this function, you can strengthen the mount: use not only self-tapping screws, but also furniture corners.

Materials can complement each other, carrying their functions. Metal, as more durable, goes to the basis of the structure, and wood as decorative elements.

Ideas for hangers in the hallway from improvised materials

I picked up a lot of ideas when the hanger was made with soul from improvised materials. This can serve as inspiration for many families. I think that in the interior it is necessary to move away from stereotypes, because any design is unique with its non-standard solutions.

In the photo, a completely ordinary hanger from a piece of board is made in nautical style. The matching backdrop and anchor hooks add color to the entire hallway.

An interesting forged lightweight option, perhaps not entirely from improvised materials, but it has a place to be. A very functional and elegant option, it contains a stand for shoes and hats.

Connected in the form of rhombuses, slats with wooden hooks, it looks very eco-friendly and stylish. Placement of hooks on different height allows you to hang a lot of things and not create an untidy pile.

Curved leaves made of thin aluminum decorate the walls in a peculiar way. And it will be very easy to make such a hanger at home. To do this, you can buy a sheet of thin aluminum in hardware stores. This material is easy to cut and quite malleable.

Pallet hanger - the most affordable and modern version hallway decor. Creates a loft atmosphere and is suitable for non-standard young people.

And, most importantly, it is completely environmentally friendly and strong material. With the help of corners and self-tapping screws, you can build both a shoe rack and a shelf. You can simply coat the pallets with varnish or stain, then a beautiful wood pattern will remain, or you can paint over with thick colored paint to match the overall tone of the interior.

For minimalistic designs, the hanger in the photo is just a godsend. Comfortable, without unnecessary details and looks very stylish. A rod is inserted inside, which allows you to make hangers out of the hanger.

I will give a small master class on making hangers from wooden coat hangers. It turns out two rows of hooks. The option is unusual, but very functional.

Having slats of different widths, you can create the simplest option furniture by simply drilling hooks and adding crossbars for fastening.

For nature lovers, images of animals and birds can be used, and an artificially aged wooden product will add history to the corridor.

An interesting combination of two materials: wood and metal. Modern compact hanger with built-in hooks.

Many times I have come across the ideas of cutlery hooks: forks and spoons, as in the bottom photo.

An interesting option for a plastic hanger for a small family. AT summer period can only serve as decoration.

DIY wooden wall hanger

To make a hanger, you need to take a few boards, either ready-made or bought in a store. You can use any wood: pine, oak, birch.

We will analyze two options for hangers.

We cut out the same sidewalls, the top and the middle crossbar, to which you then need to attach the hooks.

We cut out beautiful bends on the sides and skin all the details.

We connect in finished structure self-tapping screws, furniture corners.

We mark places for hooks and drill them.

We check the finished product for strength and varnish it.

You can make an even simpler version of the clothes hanger.

The photo shows the diagram and dimensions of the future product.

We take purchased boards or lamellas, in this case pine wood was used.

We measure the same distance between the vertical parts and fasten the frame from the wrong side. We drill any fasteners. The shelf will be hung on self-tapping screws.

We attach hooks to the front side at the same distance from each other. And we admire the result.

This hanger model can be supplemented with a shelf, to give contrasting colors. The photo shows an option when the crossbars do not go from the wrong side, but from the front.

Tell VK

How to make a wooden hanger with your own hands? It's very simple, we'll show you how. It would seem, what is a hanger in the house? Almost no one notices it, although it is quite a weighty and functional item. You will be surprised how you can improve it, and even make it yourself. Special skills are not required there, so anyone can do it.

Materials for work: what kind of wood to make a hanger

Depending on the type of hanger, we may need different materials for work. There is a general handy list that will be useful enough for any of the jobs in this category.
The arsenal of tools looks something like this:

The material from which the hanger is made.
Self-tapping screws.
Screwdriver.
Saw grinder, with which you can cut the desired parts of the hanger.
Dowels, if the structure is wall-mounted.
Screwdriver or drill (best electric).
Level, tape measure, pencil.
Sandpaper for surface cleaning.
Hooks.

Do-it-yourself outdoor wooden hanger

Wooden things have always been of high quality and durable, as well as useful in everyday life. This also applies to hangers, so we will now try to build a wooden floor hanger with our own hands.
This work will not take us much time. It will take approximately 20 free minutes, as well as all the necessary materials.

To create a wooden floor hanger, we need:

Six knees (copper).
Four tees (copper).
Four plugs (must be the same inlet diameter).
Wooden round stick of the same diameter. total length should be 5.3 meters, cut into pieces: 2 pieces of 125 cm, two more of 70 cm, 4 pieces of 20 cm, and the last 6 pieces of 10 centimeters each.

The workflow is very simple. Following the drawing plan, we must assemble all the structural elements. To facilitate the task, they are marked in the figure with letters.

"A" - 125cm.
"B" - 70cm.
"C" - 20cm.
"D" - 10 cm.

To further secure our floor hanger, use wood glue. Copper inserts will look interesting, which, on the one hand, will attract attention, and on the other hand, will be quite strong in operation.

DIY wooden hanger

An integral part of any corridor, as well as an item that is simply necessary in every apartment.

You can build a wall hanger yourself using all the necessary tools. The material option can be different, wood is the best of course. In the "cheaper" option, you can use chipboard.

Among the tools that we will definitely need are:

Screwdriver or screwdriver.
Drill.
Drill set.
Roulette with a pencil.
Hooks.

It is done very simply - just measure the desired distance and drill hooks to the board, and then hang the finished hanger on the wall. But there is more interesting options such crafts.

Wall hanger made of hammers

In this craft, we need everything the same as in previous version, only instead of hooks we will use old hammers, from which we will need to cut off the handle, leaving a short end, which we will attach to the board.

Working process:

The approximate period of time for which it is realistic to make a wall hanger is about 2-3 hours (this is together with a shelf).

Extraordinary ideas for a wooden hanger

Floor and wall hangers are considered some of the classics, but when you want something out of the ordinary or creative, you can consider the following options design.

Master class "Hanger made of real wood"

By the word "tree" is meant not only wooden material(board), namely pieces of real natural wood. Oak chocks are best suited for this work, perhaps even with knots that will serve perfectly instead of banal hooks.

Working process:

The hanger will undoubtedly attract attention, as well as brighten up the boring atmosphere of the room. Most often, this option is placed in a country house or in the country, less often in apartments or mansions.

Photo of wooden hangers in the interior

As you can see, you can make a wooden wall or floor hanger - for clothes or jewelry, for children and adults, for a dressing room or for a hallway. It could be both a classic and some kind of unusual wooden hanger - from skis, hammers, old things, a fence or doors, from pallets, and so on. The main thing is to connect your imagination, and for inspiration, I suggest looking at photos of various wooden hangers which you can do by hand.

We can conclude that there are a lot of options for hangers, as well as ideas for their implementation, and each of them is unique in its own way. Therefore, choose which of the ideas is best suited to your home and start making your own masterpiece. Drawings and improvised materials will help you with this. The main thing to have original idea and the mood to embody it.

Coming home, the first thing we do is take off our outerwear and hang it in a closet or on a hanger. The latter option has some significant advantages: it takes up little space, provides quick access to things, is easy to install, and is suitable for corridors. various forms and sizes.

Due to the simplicity of the design, it is not at all difficult to build a hanger in the hallway with your own hands.

Advantages of self-production:

H low cost of the product;
AT opportunity to achieve the best combination with interior;
And individuality of the hanger: your friends and acquaintances will not have this;
R academic work is highly valued.

Original wall hangers in the hallway are an important and integral element of the interior.

Before proceeding with the manufacture, you need to analyze the shape of the corridor. If it is elongated enough, it is better to give preference to a long hanger with compact shelves or no shelves at all. For large rooms, you can choose any model.

It is also worth considering the features of the interior: style, details, prevailing colors.

The simplest type of hanger is a wooden board with hooks attached to the wall. It is allowed to have a shelf for hats, sides located above or below it. The basis of the design can be taken as a homogeneous large wooden plank, as well as several smaller ones, fastened together.

AT traditional version execution the wall hanger represents a level on which hooks and pins are located.

If you wish to show your creative potential, you can make a custom model. For example, an excellent hanger for a nursery will turn out if you create a blank in the form of a cloud, tree or twig. For the corridor, it would be better to cut out something else: horns, a fence or an inscription.

Wall hangers in the hallway and coat hooks are selected according to the style of the interior of the room.

Materials and tools

Now, in almost every hardware store, the buyer is provided with such a rich assortment that it will not be difficult to purchase everything necessary for a wooden hanger to be created with your own hands in the shortest possible time.

DIY wall hanger in the hallway - simple work happy with the result.

To do this, you should buy or prepare the appropriate tools:

jigsaw
Hacksaw;
Blowtorch;
Sandpaper;
Screwdriver or hammer;
Awl;
Pencil;
Roulette.

Tools to help you get the job done.

From the materials you will need:

A piece of wooden board;
screws;
Hooks.

Materials for the future hanger.

For decoration:

Primer;
Paint brush or roller;
Lacquer or other coating;
Blanks for decoupage, scissors, glue, textured sponge.

Materials for decorating hangers.

hanger manufacturing process

A classic do-it-yourself hanger for the hallway does not require significant effort. Production takes a minimum of time. Initially, it is necessary to think over the design in detail, it is recommended to make a drawing on graph paper and calculate the consumption of materials.

You need to transfer the drawing with a pencil or marker.

Then you should get a wooden sheet (or board) and put it on stable supports so that a few centimeters remain between it and the surface of the floor or table. Armed with a jigsaw, cut out blanks of the required shape, observing the contour. If you want to make the edges embossed, you need to go through them with the same tool.

It is necessary to process the roughness, sand the cut points and sand.

The next step - giving the desired appearance. For firing the boards you will need blowtorch, which is successfully replaced by a gas burner. At this stage, care must be taken not to injure the fingers, and not to spoil the material. Then you need to get paint or varnish and cover all the sawn parts.

After drying, the assembly of the product is carried out using screws.

The hinged method involves mounting small rounded metal strips, called "ears". Holes are drilled in them for fastening in dowels with screws. The reliability is determined by their length.

A DIY wall hanger can be fixed in several ways.

Another, no less popular way is to do through holes. After their creation and processing, screws or nails with a long leg are skipped and the hanger is attached to the wall.

For fastening, as a rule, screws or small nails are used.

To complete the work you need to attach metal hangers. You can arrange them randomly, in one or more rows.

It can be fixed with the following devices:

"Suckers";
adhesive strip;
Magnets.

Such methods do not cause difficulties and take little time. In this case, the fastening is not very reliable and is suitable only for hats.

Any brave design options favorably emphasize the relevance and originality of the interior.

Making hangers from longitudinal and transverse boards

This design resembles a lattice, it involves the manufacture of a base attached to the wall from horizontally and vertically arranged elongated boards. In this case, it is conditionally possible to distinguish two layers: the first- transverse, second- with longitudinal.

Drawing of a wall hanger with dimensions.

To create a wall hanger with your own hands, you will need to stock up on several long boards. It is better to give preference to lumber with a width of 10-20 cm and a length of 1 m. Having decided on the size, you should get the required number of blanks.

How to assemble the hanger.

After that, it is necessary to process them so that there are no bulges, chips and roughness, giving Special attention edges. Then it is necessary to decompose first the first layer, observing parallelism and the same distance between the planks. If everything suits you, it's time to move on to the second level. Armed with a screwdriver (or, in its absence, a hammer), fix their position at the intersection.

A simple hanger option for self-production.

Hooks need to be attached to the top boards. If they have a vertical position, then it is better to place the hooks in the upper part in one row. for hanger, outer side which is formed by vertical boards, you can create several levels by attaching hooks to each of them.

Hanger dimensions with shelf.

decoration

You can complete the production by giving the product the original appearance. The most interesting surface will be if:

Before proceeding with the coating, the wood should be cleaned of traces of dust, dirt and grease.

DIY materials for decoupage hangers.

We need to prime our wooden hanger with white acrylic paint.

Glizale is a transparent paint that, with some effort, forms a textured surface. Before starting work, you should dilute the glizal with water, according to the instructions. Then the mixture is applied to the prepared workpiece and a pattern is created using a textured sponge. It is necessary to act quickly, otherwise the coating will harden in half an hour. For artificial aging of wood, a type of varnish such as craquelure is used.

It is applied to a pre-painted surface, which as a result is covered with small cracks.

Decoupage allows you to create wooden products suitable for any interior. Most often they resort to it when they want to get furniture with the effect of antiquity and complex patterns. To decorate such a hanger, you will have to arm yourself with scissors and blanks with a pattern.

Having cut out paper patterns, it is better to lay them on the surface, evaluate how they will look.

If everything suits- smear the wrong side with glue, attach to the tree and level it so that bubbles do not subsequently form, then cover with furniture varnish and leave to dry completely.

Which finish to choose is up to you. After the varnish has dried, screw the handles into place.

If you have artistic skills, you can draw a picture acrylic paints. Initially, the background and large elements are created, then the details are drawn. To finish work better application varnish and craquelure.