Choice of chainsaw. How to choose a good chainsaw for home and garden Choose a chainsaw

Even at the beginning of the last century, the process of felling a forest was a difficult and time-consuming process, but in the 20s the first chain saws began to be produced. Since that time, technological progress has not stood still, and today many different models are being produced. So that you can choose a good chainsaw that is not inferior to professional counterparts in quality and reliability, we have compiled a rating of the best chainsaws for summer cottages and at home, which includes a wide variety of models from popular manufacturers of this category of goods.

The main criteria for choosing a chainsaw

Before you start buying a chainsaw, you need to decide what you are going to use this tool for. It's no secret that the cost of this type of tool is determined by a combination of factors such as power, duration of work - that is, the class. Modern chainsaws are divided into three main classes:

1. Household. These saws are great for gardening and light repairs.
2. Semi-professionals are used for more complex work, including construction.
3. Professional saws - the most powerful and reliable among chainsaws, designed for industrial felling.

Chainsaw power

The performance of a chainsaw is directly dependent on engine power. The maximum power rating of this gas tool reaches 7 kW, which corresponds to 9 hp. Such saws are used in logging. The power of household appliances does not exceed 2.5 hp, semi-professional ones are produced with engines up to 3.5 hp, and professional ones have a power of up to 6 hp.

Weight

Low-power household devices weigh the least. Increasing the power of the saw entails, as a rule, an increase in the mass of the tool. The average weight of gasoline chain saws ranges from 3 to 6 kg.

Fuel consumption

An additional aspect when choosing a gas tool is its efficiency. Household-class products are the most economical, while professional products, on the contrary, are more voracious. The volume of the chainsaw tank is traditionally calculated for 40 minutes. work, so the larger the fuel tank of the model, the greater the fuel consumption.

Additional criteria for choosing a chainsaw

Additional, but important “little things” when working with chain saws include:

• Anti-vibration system. Its presence is necessary when working with the tool for a long time.
• Air filter. Protection against dust pollution provides it with more long work without the need for early repair.
• A reliable brake is an important criterion for tool safety. Depending on the manufacturer, they can be equipped with an anti-vibration and kickback protection system, the so-called inertial brake.
• The length of the bar determines the length of the cut. When choosing a tool, do not forget that the linear size of the tire must be consistent with the power of the saw.
• Long tires on low-power units will lead to their rapid failure.

We will review chainsaws of each class and rank the best, according to user reviews, models.

The best inexpensive chainsaws (up to 10,000 rubles)

Household series saws are the most common class with a minimum functionality, but perfectly suitable for work in the country, in the garden and for small construction work. In addition, due to a small (from 400 to 1000 hours) resource, compactness and low weight, they are relatively cheap. If you are looking for a tool for household needs, then a household saw is the best in terms of price and quality.

The Chinese model of the Husqvarna chainsaw, manufactured under the Partner P340S brand, belongs to household-class tools and is designed for short-term garden and construction work, as well as firewood. This budget chainsaw is ergonomic and easy to use. Equipped reliable system braking, has low level vibration and noise, which is rare in tools of this class, is distinguished by high quality components and a good fit of parts.

Advantages:

• a fuel pre-priming pump significantly improves engine starting, especially in the cold season;
• light weight;
• anti-vibration system reduces the load on the operator's hands;
• low consumption of the fuel-oil mixture.

Flaws:

• exactingness to the quality of fuel and oil;
• there is no window for visual control of the remaining oil and fuel;
• there is a possibility of spontaneous unscrewing of the intake manifold fasteners during operation.

Inexpensive but good chainsaw Echo CS-353ES-14 is an excellent saw for cutting firewood in the country or at home, cutting down small trees. The presence of carburetor heating allows you to use the Echo CS-353ES-14 in winter period. Steel springs and rubber shock absorbers, which this model is equipped with, significantly reduce vibration during operation. The use of advanced Japanese technology allows you to combine maximum comfort in use and high performance. Even though it is made in China.

Advantages:

• ergonomic design;
• the best power in its class;
• easy and quick to start;
• the presence of the G-Force air purification system allows you to clean the air filter less often.

Flaws:

• inconvenience of refueling;
• lack of a window for monitoring the remaining fuel and oil.

Chainsaw Makita EA3202S-40 - comfortable chain Saw, belonging to the segment of household appliances, has a 1.81 hp engine. Easy to start due to electronic ignition and primer. This model has an active vibration dampening system, a SafetyMatic chain brake and an adjustable oil pump. Unlike previous models of this manufacturer, it has practically no complaints from users. Among the reviewed household saws Makita EA3203S-40 is one of the best chainsaws in the ranking. Although Makita is recognized as the best manufacturer of power tools, this brand of gas tools is also worthy of attention.

Advantages:

• light weight, easy start;
• convenient chain tightening;
• low noise level during operation;
• large volume of the fuel tank;
• the ability to adjust the oil supply to the saw chain;
• best in its class in terms of price and quality.

Flaws:

• The disadvantage, according to user reviews, is one - a sensitive start button, but this is rather a matter of habit.

The best semi-professional chainsaws

More serious tools include semi-professional or farm grade chainsaws. Possessing average power and a higher motor resource, models of this class are suitable for operation up to 5 hours a day, but with significant interruptions in work. A good semi-professional saw will become an indispensable assistant when running a personal subsidiary or farm. Harvesting firewood for the winter season, construction and repair work, clearing the site of old trees - chainsaws of this class will do just fine with all this.

The lightest saw in the Echo CS-260TES-10 rating is designed to work with any kind of wood. This chainsaw is light and handy, weighing only 2.9 kg, the special coating of the body increases its durability. Due to the low weight of the saw, it can be used at heights and safely carried out. necessary work with one hand. Electronic ignition and easy start system allows you to work in any conditions. The oil pump is made according to professional scheme and supplies lubrication to the saw chain only during the sawing process. Engine power allows you to install a longer tire.

Advantages:

• light weight;
• small dimensions;
• easy start;
• reliability in work;
• Convenient for one-hand operation.

Flaws:

• monitoring of user reviews did not find any complaints about the operation of this model.

One of the best versatile semi-professional saws Oleo-Mac 941 C-16 provides maximum performance when working. Thanks to the three-jaw clutch, chrome-plated piston, and forged steel crankshaft and connecting rod, the chainsaw has high reliability and characteristics that bring it closer to the class of professional saws. Easy starting is carried out due to the magneto with electronic control, and an automatic oil pump ensures zero oil consumption at idle. According to the owners, this is a high-quality, hardy and comfortable chain saw.

Advantages:

• powerful two-stroke engine;
• easy start in all weather conditions;
• reliability;
• ease of use.

Flaws:

• high noise level;
• the inconvenience of the location of the chain tensioner mechanism.

Husqvarna saws are rightly considered one of the best. The Husqvarna 450E chainsaw is no exception. In terms of reliability and quality, it ranks among the best semi-professional saws. With a small mass, it has a fairly powerful 3.2 hp engine. Ergonomic handle, quick access to the filter and spark plug (cylinder cover is fastened with latches), fuel level indication and markings for felling trees make it much easier for the operator to work with the Husqvarna 450e.

Advantages:

• easy start even after a long period of inactivity;
• reliability of components;
• profitability;
• good power reserve.

Flaws:

• high price;
• expensive parts.

The leading position of semi-professional saws is occupied by the most popular chainsaw in the ranking - Stihl MS 260. Due to its versatility, power and durability, it is well-deservedly popular with lumberjacks and builders. Suitable for both felling trees and construction work. With a relatively small weight, it has a good power reserve, which allows you to use it during the day in any conditions. It is completed with tires 37 and 40 cm long, but its power allows you to install long tires, up to 50 cm.

Advantages:

• ease of launch;
• low vibration level;
• high quality chain and bar;
• ease of maintenance and cleaning.

Flaws:

• missing.

The best professional chainsaws

Professional grade saws are used for continuous operation for a long time, have high performance and reliability. The ability of such a tool to work 8 hours a day for many years is achieved through the use of durable, wear-resistant materials in its manufacture. Such saws are intended, first of all, for felling trees on an industrial scale, but are also used in construction and logging in large volumes.

The Husqvarna 395XP professional saw is used for sawing hardwood. It has a fairly high performance and power of 7.1 hp with a low weight for a tool of this class. High engine torque ensures fuel economy. The model is equipped with an excellent vibration protection system, an easy start and quick start function and a centrifugal air purification system. For long-term work, the saw is equipped with an ergonomic grip that does not tire your hands when loaded.

Advantages:

• adjustable oil pump;
• durable crankcase made of magnesium and aluminum alloy;
• quick-release air filter mount;
• high power.

Flaws:

• high noise level, it is simply impossible to work without headphones.

The Stihl MS 661-28 chainsaw is designed for extreme work loads, has high performance and power. This is the best model for harvesting large-sized wood. This model is equipped with “unlostable” nuts for fastening the chain sprocket cover, which is very important when working in the forest. The anti-vibration system is quite high quality, the saw does not create a load on the body. Existence of the compensator provides profitability and constant power of the unit. Heated carburetor, has a winter-summer mode switch.

Advantages:

• power and high performance;
• easy start;
• single-lever control gives comfort during operation;
• effective anti-vibration system.

Flaws:

• high price compared to competitors.

chain petrol saw from the Italian manufacturer EFCO MT 8200 is perfect for both logging and construction sites, and for owners country houses. The model is equipped with a decompressor, thanks to which even a beginner can handle starting a chainsaw. The controls are conveniently located on the saw handle. Due to the original electronic coil, the cooling of the mechanism is improved. Light weight and anti-vibration system create comfortable operation.

Advantages:

• easy start;
• convenient management;
• reliability and durability.

Flaws:

• missing.

What is the best chainsaw to buy?

We hope that our review of the best chainsaw models for home and garden for 2019 will help you decide which tool to choose for your tasks. In this category of gas tools, when selecting devices, our experts were guided by such parameters as reliability in operation, build quality, functionality and, most importantly, user reviews who already had the opportunity to evaluate the quality of each chainsaw presented in the rating.

Firewood preparation, preparation for the installation of building timber, trimming large trees and other labor-intensive sawing work require the availability of the appropriate tool. How to choose a chainsaw that fully meets the stated requirements?

The complexity of self-selection lies in the breadth of the range. In the production of chainsaw equipment for various purposes specializes in a large number of leading and less well-known manufacturers. Which brand to choose based on power, economy and reliability? Without proper experience, this is quite difficult to do.

Household chainsaws are the most affordable, most of them have a small overhaul life of 500 to 1000 m / h. simple in design, inexpensive chainsaw for a summer residence or a private household is designed for a fairly wide range of household work.

• Moderate, up to 2 horsepower power units. An exception is a number of household models made in China, with a power of up to 3.5 hp.
• The presence of a saw set up to 40 cm long.
• Minimum operating comfort.
• Small (up to 40-60 minutes) time of continuous operation.

The cost of a household chainsaw, depending on the brand and level of equipment, varies from 3,600 to 8,000 rubles. Budget models are included in the product range of well-known European and Asian manufacturers. A good chainsaw doesn't have to be expensive. A tool worthy of the main indicators can be selected in the budget list.

Features of the professional range

Chainsaw equipment in this category is distinguished by high quality materials and application modern technologies their processing. Power units with power from 6 to 8.5 hp allow you to effectively use the advantages of saw sets with a length of 45 to 75 cm.

Professional chainsaws are equipped with:

• modern systems easy start;
• booster pumps;
• vibration dampers;
• fuel equipment heaters;
• air intakes with efficient, multi-stage air purification.

Despite their great popularity, the price range of Shtilev chainsaws can be called moderate. The cost of household, farm and professional lineup has stabilized at the level of 17, 35 and 50 thousand rubles, respectively.

Chainsaw range of the Swedish brand Husqvarna

The quality of the presented model range and consumable components of this manufacturer is confirmed by the positive feedback from pros and ordinary users. In the list of popular model offers, and.

Husqvarna products successfully compete with the best models of Stihl chainsaws and other leading manufacturers. The cost of a branded household-class chainsaw is 14-16 thousand rubles. For 25-26 thousand, you can buy a farm-grade saw worthy in all respects, the purchase of a professional model will cost 30-35 thousand rubles.

The main drawback of the products of both manufacturers is the high cost of branded spare parts and consumables. Many owners partially solve the problem by using less high-quality and durable, but affordable Chinese-made analogues.

Products of the Italian concern Emak

The range of this manufacturer includes several versions of the basic models of Oleo-Mac and Efco chainsaws. Despite the affordable cost and high quality level, the demand for Italian chainsaw imports is small. The reason for this phenomenon is the lack of effective after-sales service, the difficulty of exercising the rights to warranty repairs, a significant shortage of spare parts.

The list of sales includes a large selection of budget-level chainsaws, such as Oleo-Mac GS 35-16, costing from 15 to 22 thousand rubles. Farm and professional class models are sold in the price range from 25-28 to 40 thousand rubles.

Asian brands

The Japanese corporation Kioritz Corporation is represented on the Russian market by chainsaws of the Echo trademark. The quality of products is inferior to the reference quality of the branded European assortment only in certain parameters.

This disadvantage is compensated by a wide choice of models costing from 12 to 65 thousand rubles, increased to 2000 hours of overhaul life. On the Russian market, the concern's products are represented by models, and others.

• Known for the excellent quality of household and professional tools, the Japanese company Makita initiated the production of modern chainsaws after the merger with the German company Dolmar. Accordingly, the entire the lineup is marketed under two brand names.
• By order of the MTD concern, several versions of the popular Cub Cadet chainsaw are being produced in parallel. Farm and professional class products, costing from 12-15 thousand rubles, are produced in Germany.

The production of the budget group chainsaws of the same name has been moved to China. According to experts, the complete set of German chainsaws with Chinese parts did not significantly affect the durability of budget chainsaw equipment, however, the number of positive reviews has recently decreased significantly.

European chainsaws made in China

The transfer of chainsaw production to Chinese enterprises had a negative impact on the rating of products of European and American brands. In particular, there was a decrease in such as Champion, Partner and Patriot.

The cost of budget chainsaws of these brands is in the range from 6 to 10 thousand rubles, the price of the most advanced developments does not exceed 20,000 thousand rubles.

The rating growth was positively affected by the transfer of state machine-building enterprises to a higher quality level. An example is the budget, from 5 to 15 thousand rubles, a series of chainsaws of the Carver brand. The number of criticisms regarding the quality and reliability of German Huter chainsaws assembled in China has also decreased.

The domestic marketing policy is set up exclusively for sales, so any manager is not interested in the wishes of the consumer, but in his financial capabilities. When choosing a saw for use in a summer cottage, it is better to focus on real reviews on independent Internet resources and construction forums.

Which brand of chainsaw to choose - such a question worries many who have a summer house or a private house.

After all, it is very difficult to do without this tool today - a chainsaw solves many household tasks and facilitates housekeeping.

Depending on the specifications, additional features and brands, manufacturers offer a wide range of devices.

Of course, choosing a chainsaw that will meet high quality is quite difficult, because the prices are presented in a wide range, but they do not always indicate reliability and efficiency.

Today, buying good devices is a real art, but if you make the right choice, you can not worry about cutting almost any tree species.

So what is the best chainsaw? Let's try to figure it out.

Before choosing a brand of a future device, it is necessary to understand the purposes for which a purchase is made, because chainsaws are divided, first of all, according to their purpose.

You can pick up a safe and popular brand, but this type will be completely unsuitable for giving. For example, the simplest option is considered to be a one-handed saw.

It is chosen mainly for the care of tree crowns, behind bushes and hedges.

Such tools can be of very high quality, but they are only suitable for decorative and garden work.

The best option for giving is a household chainsaw. Today, many brands are made specifically for business purposes.

Most often, such devices have a chain design, from time to time they require sharpening, as well as the fulfillment of all safety standards.

Such chainsaws are chosen for housework: infrequent, in a not very large volume.

The emphasis is on power, because often for a summer residence you need brands that can cope with fallen trees or a saw cut of a garden.

Here the most important question is how to choose a chain for a chainsaw.

Sometimes the cost of a saw can also be estimated by additional accessories, for example, a sharpening machine or a replacement chain may often be required.

If you need to choose a chainsaw for your home, then such a saw will be an excellent option.

And the most complex and provided with technical characteristics is a professional chainsaw. Such a tool can be used every day - it is designed for long work cycles.

For the most part, such devices are chosen by lumberjacks or people who have to cut down a large area.

Many brands in this market segment emphasize vibration protection, as well as good assembly, where the machine has a comfortable weight for carrying, and the handle allows you to work for a long time and without overstressing your hands.

Separately, it is worth highlighting the brands called semi-professional. In terms of power, they are more like professional ones, but they have a shorter duty cycle.

This makes them a good option for a summer residence or a private house. Their prices are in the middle range. However, they often require the purchase of a special sharpening machine.

What should you pay attention to when buying?

When asking yourself the question of how to choose a chainsaw, you need to pay attention to the main technical parameter of the device - power.

Today, there are brands of tools that allow you to cope with even the most difficult work, but a household chainsaw should not have a power of more than 2 kW.

The fact is that the power of the device and its weight are interconnected. With an indicator of 2 kW, it will be correct to use the tool for no more than 35 hours per month.

And choosing semi-professional devices that can reach 3 kW or more, you can get a stable 300 hours of work per month.

At the same time, you should not forget about weight, because you can choose a very powerful chainsaw, which, however, will be difficult to hold and work with.

Also important components are not only the machine, but also the tire with the chain. A chain is attached to the tire. It is logical that you need to buy the longer the tire, the thicker the workpieces.

Here you need to focus on the approximate cross-section of the logs with which the work will be carried out.

It is not entirely correct to choose a tire that is too long, because then both the power and the weight of the tool increase.

So these two parameters are interrelated, and it is important to pay attention to brands that give their optimal ratio.

Many companies themselves indicate the maximum available length parameters, for domestic purposes it would be correct to take brands that reach no more than 40 centimeters, and they also do not need a special sharpening machine.

Exist important question How to choose a chainsaw chain? The role is played not only by the state of sharpening and cutting characteristics, but also by the chain pitch.

The smaller the chain pitch, the less vibration and noise will be. However, it should be understood here that the lower this indicator, the lower the cutting speed.

The most suitable option for summer cottages and household needs in general is a step of 0.3 inches. The material and type of fastening for the chain also plays an important role, as does the possibility of sharpening.

Usually, a special machine is used for such purposes, and the process can be seen on the video.

Since a chainsaw is a rather dangerous tool, it is right not least to evaluate different brands in terms of safety.

It should be understood that the greater the power of the tool, the greater will be the reverse impact that occurs at the moment of contact with the log.

Therefore, many brands today can be bought without worrying about this indicator. Protection can be implemented in several directions.

First, it would be right to pay attention to brands equipped with a brake. It is also important to consider that a typical chainsaw machine should be equipped with a protective shield.

Firms Calm, Echo can boast of good protective properties.

It is also important to remember that when working with a vibrating chainsaw, sooner or later you can feel pain in the joints.

Therefore, mechanisms that reduce vibration are extremely useful when choosing a device and further work with him.

The easiest option is rubber pads that reduce friction and buildup of parts.

If you want to buy a chainsaw that is more thoughtful in terms of vibration protection, then you should pay attention to the principle of distributing two masses.

This means that the engine in such a device will be located separately from the fuel tank, which will balance the tool.

It is believed that this principle is fully implemented in Stihl brand saws.

Brands, manufacturers and subtleties of choice

The question of choice also rests on the variety of brands and firms that are on the market.

Of the manufacturers that can boast a wide range of models in a different price range, Husqvarna can be distinguished.

You can buy economical models, because this brand offers them just for domestic needs. You can select multiple devices.

Firstly, this is the Husqvarna 236 - the most versatile model of this brand, which is suitable for almost any simple household work.

It is also worth saying that an innovative engine has been chosen for it, which allows you to save up to 15-20% percent of fuel, which is an extremely important nuance for home purposes.

You can buy such a device at a price of about 6,000 rubles.

Also is good option the Husqvarna 240 chain saw, which, although not distinguished by a large duty cycle, allows you to cope even with thick tree trunks.

It is worth choosing such a saw for a special exhaust cleaning system and an anti-vibration system.

If the issue of increased safety during operation is important, then this brand provides a good option with a chain brake. More compact version Husqvarna 140 chainsaw.

It not only has a small size, but also allows you to organize silent operation and save fuel. Husqvarna 240 and Husqvarna 140 cost 7,000 and 9,000 rubles, respectively.

If we consider the models proposed by this brand, then it is worth highlighting more powerful units. For example, it is realistic to choose a Husqvarna 455 e-series Rancher tool.

It is quite expensive compared to other brands - 21 thousand rubles.

But for this price, the manufacturer allows you to buy not only a powerful car, but also an engine that has protective technology.

Not only the Husqvarna company is distinguished by high quality and popularity among users. Another sales leader is the Stihl brand.

Her distinguishing feature- chainsaws, which are compact, powerful and mobile, which is extremely beneficial for home conditions.

Shtil's equipment is not cheap, but it has practically no negative reviews to your side. Many experts advise paying attention to the Stihl MS 170 model.

She's different small size, but allows you to quickly harvest firewood. You can buy such a device for 7000 rubles.

Also, if the question arises, which chainsaw to choose, you can stop at the Stihl MS 180 C-BE model.

It is considered very economical, has a well-assembled machine and does not require additional, frequent sharpening.

At the same time, such a saw will be able to cope with a tree diameter of about 30 centimeters. Such a model will cost 11 thousand rubles.

But the real powerful unit is the Stihl MS 661 chainsaw. Such a device can work even under extreme loads, it can cope with almost any diameter of trees.

Large-sized wood can be sawn without problems with such a brand, and it costs 45 thousand rubles. Such a saw will not require sharpening for a long time, and the process can be found on the video in the section.

Other options available

Despite the fact that the two companies described above offer to buy chainsaws that have proven to be extremely popular and safe, there are other proven and available options choice.

Knowing how to choose a chainsaw, you can pay attention to the Makita brand. This manufacturer offers quite affordable models, for example, DCS34-35.

The machine of this Makita model is distinguished by good protection against vibration, while it copes with many household tasks, and such a chainsaw costs 6,000 thousand rubles.

You can also highlight the fairly young brand Echo, which has already managed to earn a good reputation in the domestic market, despite the fact that Japan is the home of the company.

Echo offers its customers chainsaws that can rightly be called champions in low weight. You can choose household models that will weigh less than 3 kilograms.

For example, the Echo CS-352ES chainsaw would be a good option. It weighs 4 kilograms, has good power and vibration protection, as well as a cooling system.

Usually, the cost of the Echo brand is affordable, so this model costs 7,000 thousand rubles. Echo products do not require additional sharpening.

Choosing a good tool is not easy. Today, the experts of the publication decided to figure out which chainsaw is better if there are more models on the market than the requirements for this tool?

What are chainsaws and which brand to choose?

A chainsaw (motor saw) is a hand-held chain saw with an internal combustion engine, usually a two-stroke.

The design of the chainsaw consists of:

• engine;

IMPORTANT! Modern chainsaws use a single-cylinder two-stroke carbureted engine as the engine. It has max speed - 13500 rpm, which automatically puts forward strict requirements for the oil added to the fuel mixture.

• clutches;
• ignition systems;
• carburetor;
• fuel system;
• air purification systems;
• starter;
• tires;
• chains;
• chain brakes;
• chain tension mechanism;
• chain lubrication systems.

Types, characteristics and important functions

Chainsaw classification

	Low power tools with minimal functionality. They are comfortable, lightweight and designed for 20 hours of use per month.
semi-professional	Used in repair and construction work, used when felling trees.
Professional	With high power (>2.5 kW) and a wide range of functions. They are used in the form of shaft saws. They work 8 hours without a break. The resource ranges from 1300 to 2000 hours.
One-handed	Used to care for the crowns of trees. Compact and lightweight. Design feature- the location of the handle is not at the back, but under the right hand - from above, exactly above the center of gravity.

IMPORTANT! Basic technical specification chainsaw is a power that ranges from 1.5 kW to 7 kW.

Saw sets are distinguished by length. A long tire is more suitable for felling (cutting) large diameter trees; the short one has a higher speed, therefore it is suitable for harvesting firewood, processing boards, cutting knots or small trees.

The chain pitch can be:

• 0.325" for amateur low power saws. Are characterized by the lowered vibration;
• 3/8 inch and 0.404 inch are installed on powerful chainsaws: professional and semi-professional.

IMPORTANT! Working with a chainsaw is always a risk and an increased danger. We advise you not to neglect the elementary rules and means of protection.

Protection functions

Chainsaw overview

Let's compare which is better - a chainsaw or an electric saw? Distinctive features:

Photo 1 - Makita UC3530A Electric Chain Saw

Electric saw advantages

1. it is better to cut wood with an electric saw and cut thin boards, while the cut is smooth and even;
2. emit min vibrations and little noise;
3. easy to operate;
4. much cheaper.

Cons of an electric saw

1. powered by electricity, mandatory connection to the mains;
2. with the active movement of the electric saw, it is necessary to monitor the cord so that it does not get underfoot and does not fall under the working chain of the saw;
3. can only be used under favorable weather conditions.

Photo 2 - Chainsaw Stihl MS 180-14

Chainsaw Pros

1. autonomy;
2. can be used in any weather, but in severe frost it may not start.

Cons of a chainsaw

1. engine lubrication must be maintained.

Nuances when working with a chainsaw

Carburetor - part of the engine that is responsible for mixing oxygen and fuel in the right proportions. Violation of the proportions leads either to excessive fuel consumption or to poor engine performance. The device of the carburetor in all saws is the same, Russian ones are no exception. But the Chinese are different.

Whether you have adjusted the speed correctly, the check will show:

1. gently press the accelerator;
2. if the engine speed immediately increased to max, it means that it works normally during acceleration.

• And what should be the turnover?

The maximum are considered from 2800 to 15000. If something went wrong, turn the screw L 1/8 turn counterclockwise. The maximum number of motor rotations per minute is 11500 - 15000. At a higher speed, the ignition process is disrupted.

• What compression should a chainsaw engine have?

Normal compression is considered to be 8-12 atmospheres (0.8-1.2 MPa). Below 8 and the engine will not produce the necessary power, and there will not be enough torque for the stable operation of the tool.

Candle selection

Candles differ in the geometric parameters of the body, diameter, thread length.

We recommend spark plugs from Shtil, Oregon, Brisk, NGK, Champion, Bosch.

IMPORTANT! To unscrew the candles, use a candle wrench, which is usually included with the chainsaw.

Cheap chainsaws: which company to choose a tool?

Stihl MS 361-16

Makita EA3203S-40

Champion 142-16

Usually, when buying a chainsaw for the home, budget options are considered. Inexpensive model can be selected among well-known manufacturers - Makita, Husqvarna. There is definitely a cheap one among the Bosch and Partner models.

Do not ignore the domestic manufacturer: Corvette and Interskol are not inferior in quality to foreign brands.

Chainsaw rating of the most popular in terms of reliability and quality in 2017

Name	Manufacturer country	Advantages
Makita	Japan	Leader in electric and petrol tools
Husqvarna	Sweden	Reliable, powerful and sustainable tools
Stihl	Germany	Lightweight and compact, suitable for both home and garden
echo	Japan	They have automatic chain lubrication, smooth speed adjustment; good at cutting trees

The best chainsaw models according to EtiDom

View	Model	Manufacturer country
household	Champion 142-16	USA
household	Champion 55-18	USA
household	Makita EA3203S40B	Japan
household	Makita DCS 4610-40	Japan
household	Makita DCS4610-35	Japan
semi-professional	Sturm GC99456	Germany
semi-professional	Energomash PT-99456	Russia
semi-professional	Patriot Garden 5220	USA
Professional	Husqvarna 365	Sweden
Professional	Stihl MS 361	Germany

IMPORTANT! Pay attention to Hyundai (South Korea) and Huter (Germany).

Chainsaw Ural

Photo 3 -

First produced in 1935, the Ural chainsaw can still be bought today. Initially, she stood on the technical equipment of the army. Ural-2 is an improved model and 80% of logging in the country is still carried out using it.

Weight - 11.7 kg, chain pitch - 0.404 inches; groove width - 1.6 mm, total number of chain links - 64.

Chainsaw Stihl

Photo 4 -

Swiss chainsaws for domestic, agricultural and forestry, firewood, tree work and rescue operations.

Stihl saw chains are endowed with good guiding properties and high sawing performance.

All drive links of the chain with special small lubrication channels, where adhesive oil enters, which enters the chain joints and is evenly distributed over the sliding surface of the guide bar.

Photo 5 - Stihl MS 390

All cutting teeth are made of steel. The cutting edges of the teeth are treated by electrolytic chromium plating for additional wear resistance, which increases the intervals for sharpening the cutting teeth.

The wear resistance of the entire bearing surface of the saw chain is increased by induction hardening.

On the cutting teeth of almost all Stihl saw chains there is a marking that determines the degree of wear. It helps to navigate when sharpening and observe its angle.

Stihl chainsaw: characteristics of manufactured models

Model	Description
	Used for domestic purposes; compact and lightweight; equipped with an IntelliCarb system carburetor and compensator, which makes it possible to optimize the performance of the saw; two modifications are offered; the chain is an endless closed tape of 50 links.
	Strong, powerful saw; refers to a professional tool; an indispensable assistant when cutting thick tree trunks; equipped with an anti-vibration system and a STIHL decompression valve; the presence of an inertial chain brake, carburetor heating; there is a regulation of the supply of chain lubrication.
Stihl MS 361-16	Dynamic saw with ideal specific gravity and 3.4 kW power; ultra-low vibration level; suitable for accurate cutting of forestry work, for thinning small timber, for construction work in a country house.
	Light weight; economical fuel consumption; equipped with anti-vibration system, inertial chain brake; carburetor with a special compensator; used for harvesting firewood, building and sawing down small trees.
	One of the most successful models unique system electronic ignition; the launch mechanism is easy and fast; there is a manual switch and an anti-vibration system.

Chainsaw Husqvarna

Photo 6 -

Husqvarna produces chainsaws of various models, both for professionals and just for amateurs, with high power and an advanced air filtration system.

Model Specifications

Model	Description
	Equipped with an economical 1.9 hp engine; starts easily even at sub-zero temperatures; engine displacement - 38.2 cm3; fuel tank capacity - 0.3 liters of gasoline; vibration is prevented by built-in shock absorbers and metal springs.
	It has an accelerated supply of gasoline and a quick start of the engine; on the side there is the possibility of adjusting the chain tension; there is an anti-vibration device; engine power 2 hp, tank capacity - up to 0.4 liters of gasoline.
	Professional model that is used for complex work (logging or construction); weight 6 kg; engine power of 4.5 hp; there is a magnesium crankcase, which provides high speed; equipped with anti-vibration devices, air purification system and free engine start; the capacity of the transparent tank is 0.77 l.
	Household model for sawing boards, trees, logs; weight 4.4 kg; powerful engine of 2 hp; tank capacity - 0.45 l; there is a built-in X-Torq system and soft handles; vibration is reduced by the LowVib device.
	Semi-professional model that is used both in everyday life and when felling forests; fast starting of the engine under any climatic conditions; equipped with a double-acting chain brake, a special limiter; engine power 2.6 hp; engine size - 40.2 cm3; fuel tank capacity - 0.41 l.

Husqvarna chains

Photo 7 - Chain and bars Husqvarna 15″ 0.325″ 1.5 mm 64 stars H25

Husqvarna models provide different chain lengths, but chain pitch and performance must be considered. They are divided into household (low-profile) and professional (high-performance).

The installation of a professional chain for household saws is not recommended, as it greatly reduces
tool performance. High-performance chains are made from special seals that do not dull for a long time.

• Which chainsaw is better - Stihl or Husqvarna?

Photo 8 -

Pluses

1. ideal technical characteristics;
2. low level of vibration;
3. light weight of the connecting rod and crankshaft;
4. at max loads - soft start and stable operation;
5. increase in motor resource due to two working ledges;
6. stable operation of the piston group; affordable price;
7. has an efficient cooling system;
8. reaches working speed quickly;
9. strong, reliable, trouble-free.

Cons

1. noise level is significantly higher compared to Husqvarna;
2. components are quite expensive.

Photo 9 - Husqvarna 357XP

Husqvarna pros

1. despite its simplicity, a reliable saw;
2. no problems with repairs;
3. at max load - low noise and vibration;
4. excellent noise reduction system;
5. economical fuel consumption thanks to the innovative X-Torq system;
6. high torque due to a powerful piston group and crankshaft;
7. easy and smooth start;
8. efficient cooling system;
9. affordable price.

Cons

1. more weight compared to Stihl;
2. expensive accessories.

Chainsaw Taiga

Model

Description

Reliable high power saw; actively used in everyday life and in forestry; has a rather significant weight of 8.95 kg excluding fuel; equipped two-stroke engine with a working volume of 75 cm3; gives an output power of 2600 watts at 7000 rpm; the internal combustion engine has a built-in cylinder Ø 50 mm in its design; dimensions - 900x280x300 mm; usually equipped with a saw set based on a 40 cm bar and chain with a pitch of 9.3 mm; It has a floatless membrane type carburetor.

Chainsaw Echo

The Japanese chainsaw Echo is the best answer to the legendary Calm.

Model	Description
	Professional chainsaw that is used for processing wood with any density; has a two-stroke engine with one cylinder; working volume 34 cm3; air cooling; power 2.16 hp; speed - 13500 rpm; at max load - fuel consumption 0.74 kg / h; automatic supply of oil to the chain; there is no feed intensity adjustment; manual starter with "easy start" system and primer; there is a protective shield between the chain and the handle; it is completed with the tire in a protective cover, a saw chain, a set of tools.
	Professional tool for home use; equipped with a two-stroke engine with a working volume of 35.8 cm3; air cooling; power - 1, 46 kW; max rotation speed - 13500 rpm; it is started by electric ignition CDI and the system "Easy start" with a primer; automatic chain lubrication with oil; it is possible to adjust its supply; at max load fuel consumption - 1.12 l / h; equipped for safety with a protective shield in front of the handle and an inertial saw chain brake; using the side adjusting screw, the chain is tensioned, the weight of which is 3.6 kg; there is a chain catcher and a protective shield for the rear handle; on the muffler - a casing; in a complete set – a saw chain with a cover and the tire; small screwdriver and T-key (10x19 mm).

Chainsaw chain and other components

The chain is the most important and indispensable component of any chainsaw. It is on it that the load falls, because it wears out quickly.

The chain is selected according to the following parameters:

1. tail thickness;
2. cutting depth and profile height;
3. chain length, tires and number of teeth;
4. link type.

IMPORTANT! Chains are also classified according to the way the wood is cut.

What does longitudinal and transverse type of chains mean? Longitudinal chains are oriented for cutting wood along the fibers, and transverse type - for cutting across.

The pitch defines how the circuit works:

• 0.325 inch - low-power household, non-professional circuits. Performance - 3-3.5 hp;
• 0.375 inch win chain or 3/8 with 4hp;
• 0.404 inch - designed for professionals, with a power of 5.5 hp.

Chainsaw chain oil

• What oil is used in a chainsaw?

All chainsaws are equipped with a two- or four-stroke engine and two tanks, one of which is filled with gasoline, the second with oil for lubricating the saw chain. If the oil is chosen incorrectly, the oil pump can be damaged.

For lubrication, oil is chosen depending on the operation of the chainsaw. During the warm summer season, use mineral compositions, in other cases - synthetic or semi-synthetic oils, but always refined.

IMPORTANT! Do not use used oils to lubricate the chain. There is a high risk of clogging the fuel system and breaking the tool.

Some nuances when choosing a lubricant that should be considered:

1. zoning should be minimal;
2. resistance to low temperatures;
3. density, liquid disperses faster;
4. it is preferable to use a vegetable-based oil or adhesive oil.

Specialized oil producers:

• Bio-Kettenol;
• Divinol;
• VegOil;
• Ravenol;
• shell;
• Castrol;
• Mobil.

What to fill in gasoline?

1. AI-92 is usually used in modern devices: Makita, Partner, Husqvarna, Calm, Echo. You can fill in AI-95;
2. AI-80 is suitable for domestic instruments Ural and Friendship.

IMPORTANT! Fuel consumption in any case should be kept to a minimum.

• What proportion of oil and gasoline should be?

Clean fuel when using a two-stroke engine is purchased separately and mixed with oil in proportions of 1:50. It is structurally impossible to install an oil pump in such an engine, so pouring clean gasoline into a chainsaw is strictly prohibited!

IMPORTANT! The quantity and proportions are indicated in the instruction manual.

Domestic chainsaws work well with M-12TPU, M8-V, M8-V, TP, MGD-14M oils.
Foreign options: 2.5 liters of FI-80 gasoline per 100 g of oil. In foreign models, the minimum fuel consumption, and the proportions are 1:40 or 1:50.

Chainsaw chain sharpening

The cutting edge of the chain tooth is characterized by:

1. width;
2. thick;
3. sharpening angle.

To sharpen the chain, you need a file and a holder with lines. With intensive work of the chainsaw, the chain is sharpened several times.

• How to sharpen?

1. pre-fix the tire;
2. perform turning movements smoothly away from you, and constantly turn the file;
3. first sharpen the teeth of the same direction;
4. sharpen the rest of the teeth.

• And what angle?

With a chainsaw, it is better to purchase a special template with which it is easy to set the optimal tooth angles and control the back angles of the upper and end blades, as well as the front angle of the edge.

The use of a template is especially important for estimating the value of the back angle of the upper blade, since this angle is very difficult to determine, and it must be maintained within a limited range - from 50 to 60 °.

The measurement of the sharpening angle is determined by the angle between the upper cutting edge and the line perpendicular to the chain guide.

The chainsaw chain sharpening angle can be changed, depending on the type of work.

The greater the hardness of the wood, the lower its value should be. The optimal value of the angle is considered to be 10-12 ° at longitudinal cut and 25-30 ° - when cutting transversely.

Compact and budget chainsaw Huter BS-45M

Andrey Kravchenko:

Bought for gardening. It starts up quickly with a half turn, if you start it cold. There is vibration.

Cons: instructions and weight.

Valery Zhigunov:

I took it for harvesting firewood and for small jobs. If you need to break the throttle cable, you have to break the warranty seal, which is very inconvenient. For domestic use best model.

Cons: Problems with candles.

Quiet and fast chainsaw Champion 137-16

Konstantin Loginov:

Good equipment - additional canvas, oil, keys. I sawed everything - branches, small trees, firewood. Great price for a toy like this. There were problems with the blocker: for it to work, you need to press hard.

Disadvantages: dust passes through the filter and settles on the carburetor.

Ivan Shumeiko:

If you take it for a summer residence (chopping some firewood and trimming trees), the chainsaw is excellent. Does not take up much space, economically consumes oil.

Disadvantages: chain blunted quickly, can not be stored in a cold room.

Ergonomic and durable

Vyacheslav Boyko:

Runs like a Swiss watch and is quiet. Oil consumes sparingly, the chain does not dry. for home use better tool can not found.

Cons: price.

Alexey Nikolaenko:

For serious tasks with a large volume is rather weak. If there was no Calm before, then you will not notice the shortcomings.

Disadvantages: jammed asterisk.

Comfortable PARTNER P340S

Mikhail Piotrovsky:

Good plastic, cuts for the third season, has not sharpened yet. Maintains chain/power/bar length balance. A mixture of 1:40 is not suitable, it is better to take 1:50.

Disadvantages: minimal equipment and poor vibration protection.

Alexander Voychuk:

It rumbles quietly at idle, but when sawing, the sound is tolerable. Sawed the old country house wooden house with nails. Not disappointed. Engine runs well, only stalled once in 3 years of use. After starting, do not immediately press on the gas, let it warm up for a minute.

Cons: no fuel level.

Hello dear site readers. Today I want to tell you about how to choose a chainsaw, based not only on price and quality, but also on many other factors. Such a tool has always been an indispensable assistant not only at home or in the country, but also in any farm (or the like), in the forest (for professionals).

It is also important to determine exactly how much work you want to do. It depends on the scope of work which class of chainsaw you need to choose.

Types of chainsaws. Which one to choose?

In the world of chainsaws, all tools fall into three classes. And each class presents its own line of excellent aggregates. various firms. Each class is designed for a specific type and scope of work. As I said, there are three classes namely: household, semi-professional, professional. Let's look at each class individually.

Professional chainsaw for advanced users

This class is for the most aggressive operating conditions. Such a tool can be chosen by people who are engaged in construction and logging. You can work with such chainsaws for 10-12 hours a day. The units have a high cutting speed. They are of the best quality.

You can cut logs of almost any diameter. The professional class has a power of 3.5 kW and above. Manufactured from high quality spare parts to withstand heavy and long-term loads.

But there is also a flip side to the coin. Such a tool is heavy and consumes a lot of fuel. It is not advisable to work with such a tool only on your site, as it will be difficult, given the large weight of the tool. They also have a very high price (of course, it all depends on the manufacturer).

Such a tool can be chosen mainly by organizations whose activities are related to logging. Also those people who are professionally engaged in construction. In general, if you do not plan to use the saw for 10-12 hours a day, then you do not need a professional model.

Semi-professional chainsaw for increased loads

This class is already designed for smaller loads than the professional one. Such a model can work for 6-8 hours a day (this is also enough good indicator), the power of semi-professional saws varies from 2.5-3.5 kW. Perfect for giving (everyday needs), as well as a small firewood harvesting (not big means about one house and a bathhouse, but no more).

The details in such a chainsaw are already less reliable than in professional saws. It makes sense to choose such a tool if you use it every day, but not for very long. Such saws, like professional saws, have a high price, as well as high fuel consumption. But the quality is good.

Household class of chainsaws for home and garden

This is the most common class of chainsaws. The tool has the lowest cost on the market. These are the lightest and most comfortable chainsaws. Their engines have low power, at the same time they are economical compared to the above classes.

This model can be chosen to work at home, in the country, on your own. personal plot. These units are not intended for use every day, but they can easily withstand 2-3 hours of work per day. Of course, if you load them more, their motor resources will be significantly reduced. Their power starts from 2.5 kW and below. Parts have a lower price and quality (than professional models).

Sawing safety

Sawing safety is one of the most important factors, although many do not give it due attention. There are a lot of different injuries due to the fact that the developers of the chainsaw did not worry about the safety of the consumer. And if the manufacturer does not care about the client, then the client does not need to pay a high price for low quality to such a manufacturer.

Therefore, before choosing a chainsaw for price and quality, take care of your safety. Consider the most common security systems, if such systems are on the tool, this means that the unit is of high quality.

Saw chain brake

Saw chain brake

The most important safety mechanism, almost every modern model is equipped with such a system. But the quality of this system in each chainsaw may vary. The brake has the function of stopping the saw chain in case of strong kickback.

The activation lever is located in front of the handle, by which the operator holds the tool with his left hand. With a strong kickback, the unit “jumps” up, touches your hand with the switching lever, the lever moves back, whether you want it or not, turns on the brake, which stops the chain in a split second.

Also, such a mechanism can be activated without pressing the brake lever. But the operating principle is very similar. If the chainsaw goes up sharply, the system is triggered and stops the cutting headset. I will not go into technical details, but it is necessary to check the operation of this mechanism when buying.

Chain catcher

This safety element serves to catch the chain when it breaks. At home, chains are torn very rarely, but still, this happens. First comes the stretch, and then the break (you can read more about chain stretching).

This element looks like a curved hook, which is located at the bottom of the drive sprocket cover. The principle of operation is quite simple. When the chain breaks, it flies out at a high speed (about 12 m / s) to the one who saws, but at the same time it winds up on the chain catcher and gets stuck. But if this did not happen, she would fly out to the operator (the one who saws) and could cause serious injury.

So before choosing any model, pay attention to the presence of such a system. The chain catcher can be either metal or plastic. May be on the saw body or come with the chain sprocket cover. It doesn’t matter for what purpose you want to choose a chainsaw, whether it’s working at home in the country or for construction, such an element should always be present on the tool. If not, then choose another unit.

While using the tool, I advise you to monitor the condition of the chain catcher. Since we only have one life, we don’t want to part with it because of such a trifle.

Anti-vibration system

It is also not an unimportant attribute and indicator that the chainsaw has good quality. Of course, visually you will not determine the quality of the anti-vibration mechanism, but, nevertheless, the manufacturer must indicate the vibration value, the smaller it is, the better.

Why is vibration dangerous? With prolonged exposure to a person (for example, frequent work with a chainsaw, about 3-5 years), the so-called "white finger syndrome" develops. This syndrome is characterized by pain in the hands and loss of sensitivity, it also has many more unpleasant consequences.

That's why good producers try to minimize the level of vibration on their chainsaws. This mechanism consists of several shock absorbers with which the body is attached to the handle. The best anti-vibration systems are on models from the leaders in production Stihl and Husqvarna, but they have a rather high price. Other manufacturers also have pretty good systems.

chainsaw tire

The chainsaw tire is part of the cutting system; many chainsaw indicators depend on it. Saws with longer bars have more power, as the power is needed to pull the chain over the bar while still cutting efficiently. It often happens (mainly on Chinese saws) that the tire that comes with the kit does not fit the power of the chainsaw and it is difficult for the saw to cut with it.

When buying, also ask the seller if tires are available for your model, as this is a consumable item that often has to be changed during active use.

Bar length

For domestic needs, a 35-40 cm tire is quite suitable for you; if you need something more serious, for example, for construction, then you can consider a length of 40-45 cm. A length of more than 45 cm is needed only for felling trees, etc. Sometimes it makes sense to replace the "native" tire with a shorter one, or vice versa, depending on your needs (of course, do not forget about the power of the chainsaw).

Lubrication system

The lubrication system is used to lubricate the rubbing, rotating parts of the cutting set. The oil supply is carried out from the oil tank and enters the groove of the bar, where it lubricates the chain. You can buy a model where there is one big inconvenience when the driven sprocket on the tire has to be lubricated separately (syringed) with a special syringe. If this is not done periodically, the sprocket on the tire will jam.

Lubrication system

To determine such a tire is quite simple by the presence of a hole for lubrication. It is better to choose a model where the driven sprocket is automatically lubricated along with the chain. This will protect you from unforeseen problems and purchases. additional equipment for tire maintenance.

Various systems that facilitate the operation of a chainsaw

If you want to use your saw model with certain amenities, then when buying, you should consider your wishes. If you do not need it, then you should not overpay for these functions. Chainsaw manufacturers have come up with a lot of things that will help us operate a chainsaw, consider the most important of them. But you have to pay for convenience, the more amenities, the higher the price.

Lost nuts and fast chain tension

Very often, when unscrewing the cover of the drive sprocket, nuts are lost. For such cases, manufacturers have come up with captive nuts that are part of the drive sprocket cover and are unscrewed without the help of a tool. Agree it is very convenient.

Together with nuts, some saws are equipped with a quick chain tension system. Such a function can be of different types, but the essence is the same. You loosen the sprocket cover, tension the chain without tools, all done in less than a minute. It also happens that the tensioner screw is not located as usual at the end of the chainsaw, but near the nuts of the sprocket cover, this is also quite convenient.

Easy start system

Easy start is easy starting of the engine. In the starter of such a system there is a cocking spring, which helps to crank the engine. You spend much less effort, the launch is made without jerks. Just pull and the spring will do its job.

This convenience is installed on almost all Chinese saws, but it often fails (and the very first one). The reason is that in Chinese models, this system is a poor semblance of a real development of engineers, but, nevertheless, it happens and works.

Another type of easy start is the decompression valve. It releases air from the cylinder the moment you start the engine, but when the engine starts, this valve closes. Basically, decompressors are on professional saws. It is up to you to choose a model with or without an easy start. With this feature, the price of the unit is much higher.

Opening tank lids without tools

It happens that the covers of the fuel and oil tanks have a groove for a screwdriver, they do not have finger protrusions. That is, if you tighten the tank cap tightly, then without a screwdriver you will no longer open it.

In this case, there are special covers on which a flag rises up, with which it is easy to open the tank, and then set the flag in place. This is far from a feature that cannot be dispensed with, but still it is quite convenient.

Possibility of use at sub-zero temperatures

Not every model can be used at sub-zero temperatures. But still, this problem is solvable. The model must have a winter / summer damper, which opens or closes the flow of hot air from the engine.

Also, with the help of heat from the engine, the carburetor is heated, which has a positive effect on the stable operation of the saw. And the heating is also brought to the saw handle, in the forest, and not only, this is a very useful feature.

Consumables

When you are going to choose a specific chainsaw model, it is worth asking the seller about the availability of consumables. Since their replacement during operation is inevitable. First of all, ask about the presence of air and fuel filters, as these filters have to be changed constantly. Air changes as it gets dirty, and fuel about once a season.

Another important consumables are the chain and the drive sprocket, if they are not in the store, then there may be problems with these spare parts. And you will need them anyway if, of course, you use the tool.

Saw chain parameters

One of the important parts of the cutting set is the saw chain. There are a huge number of them. Let's look at the options.

Saw chain pitch

The chain pitch is the distance between three rivets in succession divided in half. There are several types of steps.

1. 3/8 picco- This step is used on household models of chainsaws.
2. 325 - this step is already used on more powerful saws suitable for home and garden. Also for the care of your personal area.
3. 3/8 - This step is used on professional saws. Chains with such a pitch have large dimensions.
4. 404 - Also one of the professional steps.

Sharpening angle and tooth profile

The standard sharpening angle for cross cutting is 30 degrees. Most saw chains come with this sharpening angle. But so, there is an angle for longitudinal sawing, which is 10 degrees. Consider this when buying.

One more important point this is the profile of the tooth. There is a tooth with a right angle, and sometimes with a round one. A right-angled tooth is used mainly by professionals, as such a tooth cuts cleaner, dulls more slowly, but has a higher return than a round tooth. Choose a model based on your needs.

Popular chainsaw manufacturers

Let's look at the most famous chainsaw manufacturers. I hope this rating will help you choose a chainsaw for price and quality. And so let's get started:

1. Stihl– German company founded in 1926. Founded by Andreas Stihl. It occupies a leading position in the world of chainsaw production. It produces high-quality equipment that is worth its money. In the staff, it has about 900 qualified engineers who develop each node, think through everything to the smallest detail. Has its own factory in Germany, Switzerland, Brazil, USA, China.
2. Husqvarna– The Swedish company was founded in 1689, but then the production of chainsaws was still far away. Now the company is the direct and most worthy competitor of "calm". I put it in second place, as it is a very "capricious" saw. But its definitely worth the money.
3. echo- Japanese company founded in 1963. Very popular and high quality. In terms of quality, it is in no way inferior to Stihl and Husqvarna, but loses to them at its unreasonably high price.
4. Partner– A Swedish company that has been manufacturing chainsaws since 1949. Produces middle-class equipment at an affordable price. Part of the Husqvarna group of companies since 2006.
5. Sturm- German group of companies producing both household and professional tools. The quality of their chainsaws does not shine, but for that they have a very affordable price. There are also a lot of companies whose chainsaws are almost the same. In appearance, they are almost the same. Brands such as Soyuz, Zubr, Huter and the like. The only brand, in my opinion, that can be distinguished from all Chinese is Carver, these chainsaws are the most reliable of all saws in the economy segment, but although they are also not ideal.

Conclusion

Well, this article comes to an end. Thanks to everyone who read this post to the end. I hope that this article helped you choose a chainsaw and your tool will serve you for many years. I will be very grateful if you leave your opinion in the comments, and write what is really useful to you and what is not. Thank you for your attention, good luck!