Enable wireless on laptop function keys. How to turn on Wi Fi on a laptop without hotkeys

Modern technologies do daily life much easier and more convenient. Wireless Wi-Fi is a prime example of this. The fact is that nowadays there is no need to connect an Internet cable to a computer and work while sitting in one place. WiFi allows you to freely move around your apartment or house without losing your connection. Moreover, this technology allows the creation of private groups, combining several computers into one network to transfer data. Everyone knows this technology, and successfully uses it, but not everyone knows how to turn on Wi-Fi on Windows laptop 7. This is what will be discussed in this article.

What is a Wi-Fi adapter

Before proceeding directly to the system settings on a laptop, you should determine what a Wi-Fi adapter is (or, as it is also called, a wireless module). To do this, you need to know what WiFi is. As you already know, this wireless technology has a high data transfer rate that rivals a cable connection.

Radio waves are used to transmit information. It is in order to receive and send signals over radio waves in a laptop that a Wi-Fi module is needed. It performs the function of a transmitter and a receiver in one "person". As you already guessed, this module consumes electricity, which is why, to save battery power in a laptop, the manufacturers have provided the ability to turn the adapter on and off. So we got to the heart of the topic. Next, we'll look at how to enable the WiFi module on a Windows 7 computer.

How to easily set up a Wi-Fi adapter: Video

How to turn on the wireless module

First of all, it is worth noting that for this, a special button is provided on the laptop, on which the corresponding icon is displayed. To use it, you need to hold down the "FN" button and, without releasing it, press the button to turn on the wireless adapter.

Everything is elementary and simple. However, in some cases, this button may not be available. In addition, for the additional keys to work, you need to install drivers - a special software... Also, the drivers must be installed on the Wi-Fi module itself. How to do it? It's simple.

As a rule, a disc with all necessary programs for Windows 7, including drivers. If there is no such disk, do not rush to get upset, since everything you need can be easily and quickly downloaded from the official website of the device manufacturer. The main thing is to know the model of the computer and the name of the adapter.

The model is usually indicated on the laptop itself - on the lid, at the bottom of the screen, or under the keyboard. The name of the adapter can be found as follows. In the "Start" menu, find "My Computer" and right-click on it. In the window that appears, select "Properties".

Windows 7 WiFi Connection: Video

After that, you need to go to the "Device Manager" item. In the window that appears, you need to find the item "Network adapters" in which you will see the Wireless Network Adapter. This is your wifi module. Here you can turn it on or off as needed.

It is worth noting that there are several ways to enable the Wi-Fi module on a laptop with Windows 7:

With the help of a special button - you already know how to do it;
Through the task manager as described above;
By setting up a network environment on a computer in Windows 7.

You already know the first two methods. Therefore, let's look at how to enable Wi-Fi communication on a computer with Windows 7 using the network environment settings.

How to enable wireless module in Network Neighborhood settings

To do this, go to the "Start" menu and run the "Control Panel". Next, in the menu that appears, you need to select "Network and Internet", and then go to the Network and Sharing Center.

Here on the left in the column you need to find the item "Changing adapter parameters". In the window that appears, you will see various shortcuts, we are interested in "Wireless Network Connection".

If this shortcut gray, then the module is disabled. To enable it, you need to click on the shortcut with the right mouse button and click "Enable" in the menu that appears. If after that the computer still does not start searching available connections, you should use the first method to enable wireless communication. If everything is done correctly, the laptop will start searching for available wireless networks and offer a list of connections, from which you select the desired network and click "Connect".

Often, users who have purchased a laptop or netbook face difficulties when enabling and configuring wifi. The procedure itself is quite simple, but in some cases there are various snags and unforeseen difficulties, it is also sometimes required configure a router before proceeding, connect the wi-fi to the laptop. In this article, we will consider both standard connection and solutions to such problems.
How to turn on wifi on a laptop
Usually, to turn on wifi, it is enough to perform 2-3 simple operations. Which one depends on the model and manufacturer of the laptop. Here are the options for enabling the wifi network on beeches from the most popular manufacturers:

On an ASUS laptop, you need to press the combination of FN and F2 buttons.

On Acer and Packard bell, hold down the FN button and press F3 in parallel.

On HP notebooks, wi-fi is activated by a touch button with a symbolic antenna image, and on some models - by a combination of the FN and F12 keys. There are also such models on which a regular button with an antenna pattern is provided for this purpose.

To turn on wi-fi on Lenovo, hold FN and press F5. There are models that have a special connection switch for wireless networks.

On laptops from Samsung to turn on wi-fi, you need to hold down the FN button, press either F9 or F12, depending on the model.

To connect wi-fi on laptops different models and different manufacturers its original key combination can be used. Detailed description for a specific model, you need to look in the user manual that came with the laptop. The FN button is found on almost all models of modern laptops. With its help, various functions are connected and the beech is connected with other devices. If the laptop does not have an FN button, then a special button or switch is used to turn on the wireless network. As a rule, it is indicated by one of these figures.

If not found on the keyboard, examine the ends of the laptop, perhaps the switch is on the side. And also carefully examine lower part your laptop. There are models in which the switch is located on the bottom cover. Moreover, manufacturers make this button barely noticeable. It practically merges with the body, and you may not see it at first glance. It can be signed by Wireles or Wlan. Turn on wifi with the right button or combination, but it doesn't work? You should set up Wi-Fi on your laptop.
Hidden WiFi Switch Example

.

Attention: It should be said that such switches can be found in the most unexpected places, even on the back cover of a laptop. So if your WiFi doesn't work, take a close look at your laptop for a switch.
How to set up wifi on a Windows 7 laptop
Before configuring, you need to check the availability and connection of drivers. Driver check Checking the driver is to find out if they exist at all on your device and whether it is involved in this moment... So in Control panels select item Device Manager which may be hiding inside the clause Hardware and Sound.

A window opens in which we find Network adapters... There should be two items: Ethernet and Wi-Fi. One of them should have the word “Wireless” in its name. This is your adapter.

If there is no entry about the wi-fi adapter, or there is an icon with an exclamation mark on a yellow background opposite it, this means that you have a problem with the drivers. If there is no entry, it means that the drivers are not installed and you have to install them from the disk that came with the laptop. Or find it on the manufacturer's website. Without them, wi-fi will not work. If there is a record, but opposite it there is a yellow exclamation mark, right-click on this item. In the window that appears, select "Engage". The reason for the difficulties in connection may lie in the fact that the power saving mode is set in the adapter. To turn it off, right-click on it, then Properties - Power Management, now you need to uncheck the box "Allow this device to be turned off to save energy".

Now the driver is fine. Turning on the adapterwi- fi . For this through Control Panel→ Network and Internet go to Network connections... Here we find Wireless network connection... This is the wi-fi adapter. Open the dialog box with the right mouse button and select the "Enable" item. Connecting to an access point. It remains to connect the laptop to the access point. Make sure the access point is active. Find the wi-fi icon in the lower right corner of the screen on the taskbar. When you click, a window for managing networks will open, select the desired network, click "Connect".

If the network is protected by a password, the system will ask you to enter it (if you forgot the password for your network, you can find it out in several ways). Only after entering the required password will you be able to use the Internet. If the network is open, it will connect automatically. That's all. Enabling and configuring Wifi on a laptop completed... If you once set up wi-fi, then you will not need to do this anymore, since they will be automatically saved in the laptop's memory. You will only need to enable it with the appropriate button or keyboard shortcut. Remember that connecting wirelessly is draining a lot of power from your device, so the battery will be used up rather intensively. Pleasant and simple connections without incident!

24.03.2015

The wi-fi function is, essential element laptops which are very popular today. A laptop without wifi is like a gas-prom without gas.

Usually, when buying a new laptop, the wifi function is turned off by default, or you have to manually adjust the wifi settings.

The configuration is done differently on different operating systems. There are also external settings that differ by laptop model (turned on with the keys).

In this article I will tell you how to enable wifi on different laptops and how to make internal settings.

The first step is to configure the router and check if wifi is enabled on the router itself. You can turn off wifi on the router in two ways:

1. There is a wifi button on the back of the router to turn it on and off.

2. Turns on and off wifi in the internal settings of the router.

We make an external examination of the laptop, if you see an icon in the form of an antenna that glows, this means that wi-fi is on, if it is not lit then it is off.

If you see an "X" on the wi-fi sign at the bottom of the panel, it means that the network is disabled.

For almost all laptop models, there is a mechanical wifi switch or built-in software that turns wifi on and off. Laptop with mechanical wi-fi switches.

How to enable and wifi on different laptop models

HP laptop:

HP Connection Manager software.

To open the program, go to "start" - "all programs" - "HP Connection Manager". We open this program in front of the device, press the power button. Look at the picture

Asus laptop:

In asus laptops, wi-fi is turned on using a mechanical switch (on or off button).

In this case, wi-fi control becomes convenient, but if the switch fails, there will be some problems.

Also, wi-fi is controlled using the Fn + F12 key combination on the keyboard, hold down the Fn key and press F12

Acer laptop:

But some models of acer laptops do not have a button on the case to enable and disable wi-fi. Therefore, the Fn + F12 keyboard is used to control the wi-fi connection. It is necessary to press Fn and without releasing press F12.

Lenovo laptop:

To enable wi-fi on lenovo laptops, use the Fn + F5 keys. Press the Fn key and without releasing press F5. After performing such actions on the laptop, the wi-fi indicator should light up

Samsung laptop:

To connect a laptop wireless wifi networks you need to press the combination Fn + F9 on the keyboard. Hold Fn without releasing press F9. As in all cases, if the connection to the network is successful, the indicator on the laptop will light up.

Toshiba laptop:

To activate wi-fi on Toshiba laptops, use the Fn + F8 keyboard shortcut. Again, hold down the Fn key while holding down and pressing F8.

Internal wifi setup on laptop

These settings are operating system dependent, which are customizable. Basically, all settings are related to wi-fi is in sleep mode i.e. in some cases it is necessary to enable them manually. Let's consider the settings on each windows operating system. Before starting the settings, check the next parameter.

On the bottom panel on the desktop, we are looking for the battery charging sign. Click on this sign with the right mouse button and select "windows mobility center".

We are looking for the wireless network section that opens in the window, make sure that it is on.

How to turn on wifi on a laptop with windows 7 operating system

Open "start" go to "control panel" select "network and Internet". The window that opens, go to the "Network and Sharing Center". Further, on the left side of the window, go to the section "changing adapter parameters".

After that, a window with wireless networks will open. Right-click on "wireless network connection", select "enable"

if the network is on, we leave everything as it is. If the data section is enabled, then the window that opens will contain available wifi points.

Choosing the desired network and click to connect. If, when setting up wifi on the router, you specified a password, then when you connect to the network, the laptop will require that password from you, enter the password and press ok.

How to enable wifi on a laptop with windows vista operating system

In order to configure wifi on windows vista, you need to follow the same steps as on windows 7.

We go "start" and open the "control panel". On the left side, click "switch to classic look».

Now you need to select "Network and Sharing Center". On the left side of the window, click "manage network connections".

Now go to "manage network and connections" right-click on "wireless network connection" and click "connect".

After completing these actions, the wifi connection list will open. Select the desired connection, press connect if necessary, enter the password, press ok.

How to turn on wifi on a laptop with windows xp operating system

For the laptop to be able to connect to the wifi network on operating system windows xp, you need to follow these steps.

Press "start" open the "control panel" go "network connections". Right-click on the "wireless network connection" section.

Right-click on "connect" select "view available wireless networks". A window will open in this window, click on "change the order of preference networks."

Next, click on "network and access point" click on the checkbox " automatic connection to the network ". Now go to the section "view available wireless networks", select the network you need and click "connect". If everything is done correctly, a message will appear on the taskbar in the lower corner that a completely successful connection to wifi.

If, when applying the above settings, it was not possible to enable wifi on the laptop, then you need to check the following parameters.

Installing wifi adapter driver on laptop

In order to check whether the wifi adapter driver is working, you need to go to the "start" "control panel" "system and security" and click "system". Next, go to the left side of the "Device Manager" window

Opened in the window, go to the network adapters section. If there is a yellow triangle with an exclamation mark as in the picture

This means that the driver is not working, in order to fix this situation click on the non-working driver with the right mouse button, select "update driver".

In the window that opens, select "automatic update", in the event that you have an Internet connection. Or go to the official website of the manufacturer of your laptop, in the drivers section, download the required driver.

In practice, there are cases when the wi-fi adapter is disabled. In this case, press the right mouse button on the adapter and press “activate”.

There are also cases when the adapter is under the energy saving filter. To check if the adapter is under this filter, go to the "control panel" "security system" "system" "device manager" then click on the driver itself with the right mouse button, click on "properties" that opens in the window, go to "power management"

In this window, uncheck the "Allow this device to be turned off to save energy" checkbox.

On this question, how to turn on wifi on a laptop is resolved. I hope the information was useful to you. If you have any questions, write comments.

Understanding how to turn on wifi on a laptop

Hello, friends. In this article, we will analyze the question of how to turn on wifi on a laptop. Quite a common situation when it seems that everything works for friends and acquaintances, but you do not.

We highly recommend that you pay attention to the article about cleaning laptops in Minsk. It depends on the timely cleaning of beech from dust, how long it will work without breakdowns.

Introduction

First of all, it's worth saying that to enable wifi, you need to install a driver on it. Perhaps you have it installed (it may be present in the operating system in advance), or perhaps not. If it is absent, then in most cases it will not work to turn on wifi on the laptop.

Check if the driver is missing

In order to make sure that the driver is installed, go along this path in Windows 7: right-click on the "My Computer" icon, select properties there. A window like this appears:

In it on the left we find the line "Device Manager". It contains information about the main devices of a laptop or computer, including whether you can determine whether the drivers are installed or not. We are interested in network adapters. There should be a network card and a wi-fi adapter, some of which are usually written as wireless.

There should be no exclamation marks in this tab of network devices, they mean that the driver is not installed. If we checked it and so far no deviations have been found, then double-click on Wireless, that is, a wi-fi adapter.

There you can see whether the device is active or not. If it is written, turned on, then everything is fine, we figured out the technical part. Then it remains to turn it on on the beech itself.

Keyboard shortcuts to enable wi-fi

And so, Asus, in order to turn on wifi on a laptop, you need to hold down the fn and F2 keys.
On MSI models, this is done with the fn + F10 buttons.
On copies of Acer and Packard Bell, you need to hold down the fn + F3 keys.
On HP models, we use the touch button with the antenna image, and it is also possible to use the fn + F12 buttons.
On Lenovo beeches, it is connected by pressing the fn + F5 keys. There may also be a situation, as in the IdeaPad z570 model, where you need to switch a special switch from the right side.
On Samsung beeches, press fn + F9 or fn + F12.

also in rare cases the fn button may be absent, which means that wifi is turned on on the laptop with some kind of button. She needs to be found. It usually looks something like this, although some manufacturers may place it elsewhere on the case:

If you did not find anything similar to these icons, then it is worth examining the entire beech body and possibly finding a switch labeled Wireless or Wlan. Plus, if you successfully find it, after pressing, if you look closely, an indicator light should light up, such as, for example, which shows the charging of a beech.

But it is not a fact that there will be such an indicator. After you have turned on the adapter, the icon should change in the taskbar at the bottom right near the clock, where the network connections are located.

You will only have to select it, a list of available ones will open in front of you. wifi networks... Select the one you need and connect to it. If you have problems with this, then we advise you to refer to the article on how to connect wi-fi on a laptop.

That's all we have sorted out with you the situation of how to turn on wifi on a laptop. Perhaps you will not be able to do this, due to the fact that beeches are different and there is no universal method. But you will be well informed about how the process is going, this in any case will bring you closer to your goal. Finally, if not difficult, please leave a comment on the article, thank you.

“I sat in a cafe today and could not connect to wifi in any way. The staff said that everything was fine with them. What could be the matter? What should I press? "

Thanks in advance, Alina Kireeva

If you have a laptop, then you probably want to use it to access the Internet. To take advantage of this feature, you first need to turn on Wi-Fi on your laptop. Let's see what you need to do to make your laptop see all available wireless networks and could connect to them.

Enabling Wi-Fi via switch and hotkeys

If the wireless icon in the system tray is missing or shows that there are no available networks, although you probably know that you are in range Wi-Fi signal, then:

Have different models In laptops, the keyboard shortcut for controlling the adapter may differ. For example, for ASUS laptops, Wi-Fi is enabled by Fn + F2, and for HP - Fn + F12.

By the way, on some laptop models there are special utilities for enabling the Wi-Fi adapter. They can be called in different ways: "Wi-Fi manager", "Wi + Fi Assistant", etc. Without running these programs, the adapter will not work, no matter what you do, so make sure you have them enabled.

Wi-Fi connection via operating system

If the adapter is physically enabled, but no available networks appear, then check the status of the wireless connection - it may be inactive.

After that, check again if there are networks to which you can connect. If yes, then click on the desired access point, enter the password and establish a connection.

Using Device Manager

If the listed methods do not help (for example, there is no wireless connection), then try turning on Wi-Fi using the device manager.

Click on the "Computer" icon with the right button.
Launch the Manage tool.
Find "Device Manager" in the menu on the left.
Expand the Network Adapters section.

Find your Wi-Fi adapter. If it is marked with an arrow pointing down, it must be turned on. Right click on the equipment and select "Engage". Sometimes an exclamation mark is displayed next to the device - this is a message that the drivers are not installed correctly.

To fix the error, go to the laptop manufacturer's website and on the "Support" or "Service" page, find and download the latest drivers for the Wi-Fi adapter of your laptop.