Installing Windows XP.

Windows XP users are increasingly starting to experience problems running new games, programs and support for certain components due to the lack of suitable drivers. Therefore, almost everyone is now switching to more recent editions of Windows, some are choosing the seventh version. Today we will take a detailed look at the process of how to upgrade Windows XP to Windows 7.

This task is not difficult and does not require any additional knowledge or skills from the user, just follow the instructions in the installer window. However, there are certain nuances that need to be dealt with.

Checking the compatibility of Windows 7 with your computer

Most often, the owners of old weak computers the XP version is installed, it is not demanding on the system, it loads to a minimum RAM and the processor, which can not be said about Windows 7, because its minimum system requirements are slightly higher. Therefore, we first recommend that you find out the characteristics of your PC and compare them with the requirements of the operating system, and then proceed to the installation. If you do not have information about your components, then special programs will help you find it out.

Step 1: Prepare a bootable flash drive

If you are going to install from a disk, then you do not need to prepare anything, feel free to proceed to the third step. Owners of a licensed copy of Windows on a flash drive can also skip this step and move on to the second. If you have a flash drive and an OS image, then you need to make preliminary settings. Read more about it in our articles.

Step 2: BIOS and UEFI settings for installing from a USB flash drive

Owners of older motherboards will have to perform a few simple steps in the BIOS, namely, you need to check USB device support and set boot priority from a USB flash drive. The whole process is described in detail in our article, just find your BIOS version and follow the instructions.

If motherboard equipped with a UEFI interface, the setup principle will be slightly different. It is described in detail in our article on installing Windows on UEFI laptops. Pay attention to the first step and follow each step in turn.

Step 3: Reinstall Windows XP to Windows 7

All preliminary settings have been made, the drive has been prepared, now it remains to follow the installer's instructions and the OS will be installed on your computer. You need:

Now the installation process will start. The screen will show the progress and what process is running on this moment. The PC will restart several times, after which the installation will continue, and in the last step, the desktop will be configured and shortcuts will be created.

Step 4: Prepare the OS for comfortable use

Now you have a clean Windows 7 installed, without a lot of programs, antivirus and drivers. All this must be downloaded and installed by hand. We recommend that you prepare offline driver installation software in advance, download a network driver, or use the included disk to install everything you need.

Reinstalling the operating system is not as difficult as it seems at first glance. It is not at all necessary to contact a specialist for this, especially if you have a disk with the necessary distribution kit. Despite the fact that Windows XP is considered obsolete and its support will end in 2014, its popularity is still very high. This means that it's time to talk about how to install Windows XP. My guide is suitable for those who have basic computer skills.

To begin with, I advise you to think carefully before reinstalling the system.

People who are poorly versed in computers often have one thing for all problems. one-stop solution- reinstall the OS. Yes, it almost always helps, but most errors and problems can be corrected more simple ways. If you know for sure that you need a reinstallation, this guide may come in handy. So, in order.

Preparing for installation

Naturally, you will need a disk with a Windows XP distribution kit. If you are working with a laptop that does not have an optical drive, you will need to pre-install the same distro. Don't forget that the motherboard must support booting from Flash USB or Flash HDD. You will find instructions, for example, for installing Windows 8. Make sure that the disk or flash drive is fully functional, after which you can proceed to the next step.

Before you install Windows XP from a disc on your computer, you need to do backups all the files you need located on the system partition.

For most, this is drive C. The fact is that a “clean” installation with the removal of the previous system requires formatting. This will lead to the loss of files, so you need to copy them somewhere beforehand. I recommend making backups of other partitions too if you have time and suitable media, although this is not necessary.

We start the installation

So, let's move on to the most important thing. Make sure everything is ready. Insert a disk with the system or connect a USB flash drive if there is no disk. Now you can go one of two ways. The first is to use the autorun program, in which you can select the type of installation and other options, after which it will automatically restart the computer to begin the process.

The second way, more preferable and universal, is to reboot yourself and choose to start from a disk / flash drive. I will tell you how to install windows xp from a disk via BIOS. You will probably need to change settings to do this. You can also make BIOS updates before installation, you will learn about it. The BIOS should have a tab called "Boot" or have that word in its name. You need to go there and change the download queue so that downloading from CD or Flash is in the first place. After that, exit the BIOS and save the settings. The computer will reboot itself and start the installation.

Key moment

Oddly enough, the installation itself is quite simple. At the bottom of the screen there will be tips on which keys you need to press in order to perform a particular action.

First, you will see a loading screen, which takes some time. Then the installer will prompt you to read the license agreement, after which it will ask you on which logical drive to install the system. You should select drive C, if it was you who always had it as a system drive. I remind you once again, all data from this disk will be deleted. Confirm your choice.

The installer will format the drive and start copying files. In general, from this point on, practically nothing is required of you. V right moment the computer will restart itself windows screen XP, after which a guided installation will begin. At some point, you will be prompted to select options for language, keyboard layout, time zone, etc. These settings can be changed later. You will also need to enter serial number disk.

Hello, friends! In the modern information world, everything is tied to personal computers, most of them work under the control of the Windows operating system. Most likely, you also have systems from Microsoft Corporation installed at home. These systems are good for everyone, but they can also be buggy. Therefore, knowledge about installing operating systems would not be superfluous. In this article I will try to explain as simply as possible how to install windows(Windows XP).

Let's look for an image on the Internet. To do this, you can enter in the browser line windows xp sp3 download. Many resources recommend installing clean builds of Windows XP, you can find them by typing in your browser windows xp msdn. The choice is yours. Personally, I like IDimm's builds of Windows XP. You can find them by asking in the browser line idimm.

At the moment, these builds have the following name: Windows XP SP3 IDimm Edition Full/Lite 24.12 RUS (VLK) (2012) Russian. Those. There are two builds: Full - full and Lite - lightweight. The VLK postscript indicates that this assembly does not require activation. The only thing you need is a key. Find it in the information when you download the image and save it. In the same place, read the difference between the full and lite versions and decide which one you need. I like the full version.

Another plus of these assemblies. They added a package of drivers "AHCI MassStorage" for the ability to work in AHCI mode. This mode is responsible for supporting NCQ technology, which can significantly increase the performance of the drive and, consequently, the system as a whole. Therefore, install operating system we will be in AHCI mode.

You can download the image from the site http://idimm72.ucoz.net/, but this is not convenient and slow. It is better to find and quickly download this assembly on torrent trackers. For example or .

The downloaded file has the name: WindowsXP_SP3_IDimm_Edition_Full_v.24.12.iso.

Before writing the file to disk, you need to check the hash sums to make sure that no error occurred during the download process and the downloaded image is 100% identical to the original.

File Hashes tab

Copy the MD5 amount below and paste it into the Hash Comparison: field. If the file is identical to the original, then instead of the picture with a question mark, a green “bird” will appear, if not, a red cross will appear.

At the beginning of the download, you should see the following window. We don't touch anything. We wait

A menu appears with several boot options to choose from. Choose Semi-automatic installation of Windows XP.

Windows XP installation disc menu

The difference between normal and semi-automatic installation Windows XP is that the last part of the user is excluded as much as possible.

After selection begins windows installation.

Usually, 5 GB is enough to install only Windows XP, but if you plan to install programs on the system disk (the disk on which the operating system is installed), it is recommended to make it larger.

Selecting a partition for installation

Setting the time and date

We get back to the main installation window

Main Windows Setup window

After the installation of Windows XP is completed, the computer restarts

It will also ask you to wait a while.

In the next window, you must enter the user or users who will work on the computer. You must enter at least one user

Computer users

Operating system installation completed

The process of installing additional programs is as follows

Installing selected programs

Windows installation XP completed successfully if you see the picture below on your monitor

The operating system is installed.

Driver installation

Conclusion

The article considered how to install windows xp. Namely: where and how to download the image of the operating system, how to burn the downloaded image to disk, how to directly install the operating system and how to install drivers. The first time it will be hard and long to install, but each time you will get it easier and faster. In fact, the operating system is the same program as others, just with a few installation nuances.

Another good news. The stability time of the operating system will increase with each reinstallation)

If you have any questions, please watch the video below or leave a comment. The only note is that it is not recommended to stop services especially the Automatic Updates service. I hope I was able to explain this in the simplest and most accessible way possible. how to install windows, in our case Windows XP.

Thank you for sharing the article in social networks. All the best!

This section describes in more detail all steps to install Windows XP Professional. Windows XP installation procedure Home Edition is a process that is similar to the task execution procedure - Professional Edition. Starting with Windows XP Pro being a more advanced operating system, by looking at it we will be able to demonstrate the installation procedure, but in a different way.

The most optimal and the right decision Windows XP installation will be in the case when the previous operating system is completely “removed” and all files and folders are deleted. It's not hard to do a clean install, just follow a few guidelines. Specifically, you will need to check the Windows XP Compatibility List to make sure your hardware is supported by XP. There is such an opportunity as a compatibility check on the network to download drivers for Windows XP. Be sure to save any necessary drivers to floppy disks or a CD before starting the installation.

Windows xp can also be installed from usb drive(flash drives). To do this, you need to prepare the usb itself (flash drive). How to do this is described here:. This is necessary when you have a netbook, or a broken drive. The installation procedure itself is no different from installing from a disk. Except for setting the boot priority in the BIOS. In our case, we will install from the disk.

So everything is saved Windows versions XP from the boot CD. To boot from CD/DVD-ROM, you need to set boot sequences. Look for the boot sequence in the BOOT tab, according to your BIOS settings, and check that the device comes first - from the CD / DVD-ROM. Only now, you can proceed to the following lists in order:

Guide on how to install Windows XP on a netbook and computer

Step 1— Start your computer and place the Windows XP CD in your CD/DVD-ROM drive. The computer will automatically detect the CD and you will get the following message: "Press any key to boot from CD". This is fine. Now, as soon as the computer starts booting from your disk, the following window will be displayed:

Step 2- Now you have to press F6 in order to install further drivers: SCSI or Raid. If you are using an IDE HDD, you do not need to press the F6 key. If you are using a SCSI or SATA hard drive, then you must press F6 otherwise Windows will not recognize the hard drive during setup. Be sure to check that the Raid drivers are on the floppy. Drivers are usually supplied on a CD that you can copy to a floppy disk ready for installation.

Step 3- Click "S" to indicate that you want to install an additional device.

Step 4- You will be asked to insert the Raid floppy or SCSI drivers. You must continue to follow the instructions displayed by the installation system. Press the enter key after you have inserted the disc.

Step 5- Here is a Raid list of drivers for your HDD. Now you should select the desired and correct driver for your device, and click the enter key (enter).

Step 6- After that, you will get a Windows XP Professional installer on the screen. You have the option to install new parts of your PC, "repair" a previous installation, or choose to quit (end the process). Since we decided to do a new and complete installation, just hit Enter to continue.

Step 7- A window will open for you to accept the licensed version and your consent. Press the "F8" button to accept the terms and continue with the installation:

Step 8 —Perform this action carefully! A partition will be created here, and Windows will be installed there. If you have a new unformatted drive that you received before this procedure, similar to the one shown below. In our case, the disk size is 10237MB. Here you can make a choice to install Windows on the disk without creating a partition, i.e., the entire disk space will be used. If this step seems right for you, just go ahead and press enter (enter), Windows will automatically create partitions and format the drive as one large space on disk.

However, for this demo, I will be creating two partitions. The size of the first partition can be 6001MB (drive C:) and the second partition will be slightly smaller - 4228MB (drive E:). We can create two partitions by having one that stores Windows applications and another that stores our data. So in the future, if something goes wrong with our Windows installations, such as a virus or spyware, we can re-install Windows on the C: drive and our data on the E: drive will not be affected. Please note that you have the opportunity to choose any partition size that suits you. Let's say if you have a 320GB hard drive you can split it into 2 160GB partitions.

Click "C" to create a partition.

Step 8- Windows will display information about overall size hard drive, and ask you how much you want to allocate for the section you're about to create. I will choose 6001MB. The screen shown below will appear. Notice this shows "C:" is partition 1 and then the size is 6001MB. This means the partition has been created. We still have 4236MB of unallocated space. Now select the unallocated space by clicking the arrow key. Press "C:" to create a new partition. You will see the total space available for the new partition. Just choose, in our case 4236MB.

Step 9- Now you will see that both sections are listed. Partition 1 (Drive C:) 6001MB and Partition 2 (Drive E:) 4228MB. You will also have 8MB of unallocated space. Do not worry about it. Just leave it. Typically, Windows has some unallocated space. You might be wondering what happened to the D: drive. Windows is automatically allocated to the D: drive, on a CD/DVD-ROM.

Select Partition 1 (Drive C:), and hit Enter.

Step 10- Choose to format the partition using the NTFS file system - it is recommended to use the file system for this procedure. If the hard drive was formatted before you started, then you can choose a quick NTFS format. We chose NTFS because it offers many security features, handles large disk sizes, and has a large array of secure formatting features.

Now, Windows will start formatting the "C:" drive and copy the installer files, as shown in the two photos below:

Step 11- At the end of the installation, copying all the necessary files to your computer, you will be warned to restart your PC. Do not remove the CD from the XP under any circumstances. After turning on the PC, a sign will be displayed, but this time DO NOT press any key when the message “Press any key to boot from CD”, etc. appears. After a few seconds, the installation program will continue. The Windows XP Setup wizard will walk you through the installation process to collect information about your computer.

Step 12- Select your region and language.

Step 13- Enter the desired name and organization name.

Step 14. Enter your product key.

Step 15- Computer name and enter the Administrator password (it is possible without it if you are the only user on this PC). Don't forget to write down the Administrator password.

Step 16- Enter the correct date, time and select your time zone.

Step 17- To configure the network, select normal and click "next"

Step 18- Choose a name working group or domain. If you are not a member of a domain, then leave the default settings and click next. Windows will reboot again and the display will now be configured

Step 19– As a result, Windows will start and display a welcome message screen. Press the "next" key to continue.

Step 20- Select "Help protect my computer, turn on automatic updates and click Next".

Step 21- Next, you need to choose how you will connect to the Internet. If you are connected to a router or local network, then select: "Yes, this computer will be connected to the Internet through local network or home network. If you have a dial-up modem select: "No, this computer will connect directly to the Internet." Then click the "Next" button.

Step 22- Done, now what do you need to activate Windows? Select "yes" if you want to activate Windows over the Internet. Select "no" if you want to leave the activation at a later time.

Step 23- Add users who will be subscribed to this computer and click "continue".

Step 24-Your PC system will display a window similar to "Thank you", you should confirm the end of the installation. Click the "Finish" button.

Step 25. Now it follows, forcibly restart the computer and enter, so to speak, “into a clean OS system” again.

Step 26- Now you should check in Device Manager and make sure all drivers have been loaded or if there are any conflicts. From the Start menu, select Start -> Settings -> Control Panel. Click on the System icon, and then from the System Properties window, select the Hardware tab, then click on Device Manager.

You will see a yellow exclamation point "!" next to any of the listed devices, this means that you have not found any drivers or drivers that are not correctly loaded. In our case, we have a Video Controller (VGA compatible) with no drivers installed.

To install the driver manually, use the following procedure:

(a) From the device manager, double click on the device containing the exclamation point.

(b) This will open the device properties window.

(c) Click on the Driver tab.

(d) Click the "Update Driver" button.

You now receive multiple solutions. The first solution provides an automatic search for the correct driver. The second parameter allows you to specify the location of the driver. If you don't know the location of the driver, choose automatic search, which can find the required driver from the manufacturer on the included CD or Floppy Disk. Windows will install the necessary drivers and may ask you to restart your computer for the changes to take effect. Use this procedure to install drivers for all devices that contain an exclamation mark. Windows will be fully installed and ready to go when there are no more exclamation points in Device Manager.

Windows XP is one of the most popular operating systems and although it has been around for many years, many people still use this system. if you have old computer that you want to restore, or if you want to install XP on a new computer, it won't take long.

Note: Microsoft no longer supports Windows XP, which means updates are no longer available for this system. So consider installing or .

Steps

Part 1

Setting

Your computer must meet (or exceed) the minimum system requirements to start Windows XP. You can find information about your computer's components in its instruction manual or by using DirectX Diagnostics.

• To run DirectX diagnostics, open the Run dialog box (press WinKey + R), type DXDIAG and click OK.
• Minimum system requirements
  • Processor: 300 MHz (Intel or AMD)
  • RAM: 128 MB
  • 1.5 GB free space on disk
  • Video card: Super VGA (800x600)
  • CD/DVD-ROM
  • Keyboard and mouse
  • Network adapter (for network connection)
  • Sound card and speakers or headphones

1. Find the Windows XP key. It is printed on a sticker on the disc box or system block. The key is a set of 25 characters divided into 5 groups (5 characters per group). You will need a key to complete the Windows installation.

   Set your computer to boot from the CD/DVD (rather than the hard drive). This will allow you to boot from the installation disk. You can change the boot order in the BOOT menu in the BIOS.

   Part 2

   Installation

   1. Insert your Windows XP installation disc into your optical drive, then save your changes and exit the BIOS. Your computer will restart and the message "Press any key to boot from CD" will appear on the screen. Press any key to boot from the installation disk.

      • The computer will download the files needed to start the installation; this may take several minutes. When the download is complete, a welcome window will open.

   2. The Welcome window will display several options, but if you are installing or reinstalling Windows XP, press Enter to configure the system installation options.

      Read the license agreement and then press F8 to agree to its terms.

      A list of partitions on the hard drive (or multiple drives) will be displayed. If you are installing Windows XP on a new hard drive, you will only see one partition called Unallocated Space. If you already have a system installed on your disk, then you will most likely see several partitions.

      • Installing Windows XP will destroy all data on the selected partition. Therefore, select an empty section or a section with the data you need.
      • You can delete partitions with the D key. They will turn into unallocated space. When you delete a partition, you will lose all data stored in it.

   3. Create a new section. Select the unallocated space and press C. A new window will open where you can set the size of the partition to be created. Enter the size in megabytes (MB) and press Enter.

      • By default, the size of the created partition will be equal to the size of the entire unallocated space. If you don't plan on creating multiple partitions, leave everything as default.
      • Windows XP itself requires at least 1.5 GB (1536 MB) of free space. Therefore, create a partition of at least 5 GB (5120 MB) or larger if you plan to install many programs.
      • You can create multiple partitions on one disk. This will allow you to store programs and media files on different partitions or install a different operating system. Windows XP can only be installed on one partition.

   4. Select a new section. After creating a partition, you will be returned to a window where you can select a partition. The new partition is usually named "C: Partition 1". Select it and press Enter.

      Select Format Partition as NTFS and press Enter. NTFS knows how to work with files big size and more secure than FAT. NTFS also supports system level compression.

      • If the partition is larger than 32 GB, you will not be able to select FAT.
      • Do not select the "Quick Format" option, as this will not check the hard drive for errors or bad sectors. Therefore, perform a full format of the disk. If the disc is damaged, it is best to replace it immediately.

   5. The duration of the formatting process depends on the size of the selected partition (the larger the size, the longer it will take).

      Windows will now begin copying files from the installation disk and will ask you to restart your computer when the process is complete. Press Enter when you are prompted to restart your computer, or after 15 seconds the system will do it automatically.

      When you reboot, you will again see a message prompting you to press a key to boot from the CD. Ignore this suggestion and let the computer boot from the hard drive.

      The Windows logo will appear on the screen, and then the left half of the screen will show a list of steps to install the system, and the right half will show tips for working with the system. The time remaining until the installation is completed will be displayed below the list of steps.

      • During the installation process, the screen may flicker, dim, or change the size of the image.

   6. Select the language and regional settings in the corresponding window that opens during the installation process. Select the appropriate options and click Next.

      • Enter your name (if you wish). This can be done in the "Owner" window; the name will be used in certain situations, such as when creating documents.

   7. Enter the key. You will not be able to complete the installation process without a valid product key. Click "Next" to continue.

      • Some versions of Windows do not require you to enter a key until the installation process completes.

   8. Set the computer name. Under this name, the computer will appear on the network. Windows enters a default name, but you can change it if you like. You can also set a password for account administrator. This is optional but recommended for public computers.

      Select your time zone and set the date and time. Click "Next" to continue.

      Set the network settings. Most users can leave the default network settings or consult a specialist (system administrator) for network settings.

      • In the next window, most users can select "This computer is not connected to a network or is connected to a network without a domain." Or contact your system administrator for help.
      • You can leave the workgroup name as default.

   9. Wait for the installation process to complete. This will take a few minutes, after which the computer will restart. After the reboot, you will be taken to the working Windows table xp. The installation of the system is complete, but there are a few more things you need to do.

      Part 3

      Completion

      1. Adjust screen settings. After starting Windows, you will be prompted to adjust the image on the screen. Click OK to start the setup. The screen will blink a few times and then a message will appear asking if you can make out the image on the screen.