How to make outdoor outdoor for clothes. Wheel hanger: Good solution in interior design

Hall in a sense is the face of the whole apartment. I want to feel comfort and comfort from the very entrance, so it sometimes makes no sense to clutch it with massive cabinets. In this article, we will tell you how to make a wall hanger with our own trees and other materials, show drawings, photos and video to create hangers for clothes to the hallway.

Some features

The wall hanger can be accommodated not only in the hallway, but also in the bathroom and in the kitchen, so you can make it a designer solution that will add a highlight to the interior of the room. The basic requirements that can be submitted to this item is:

• simplicity;
• ease;
• simpleness;
• strength;
• availability of materials;
• compactness.

By the installation method, it can be:

• wall;
• ceiling;
• mobile.

In the first embodiment, it makes sense in the manufacture of a corner design. If you install the hanger to the floor, you can place more weight on it. Options can be combined by creating, for example, a wall-mounted hanger with a support for the floor.

Outdoor design is usually not used in bathrooms and in the kitchen. It is inappropriate: such a hanger is quite a lot of useful space.

By way of hanging clothes, hangers highlight:

• with hooks;
• with a barbell under the shoulders.

In the first case, all the product will occupy a much less space, but you can hang any clothes on my shoulders, without fear that it will face, it stretches and will lose a presentable look.

Materials

For the manufacture of hangers most often use wood and metal. Someone may decide to order a ready-made forged design if it fits into the overall picture. Hooks can be fixed on:

• glue;
• self-tapping screw;
• magnets;
• suckers.

If you plan to hang up the outerwear, which in winter is especially heavy, then the best option will be the use of self-tapping screws. The rest are perfect for a bathroom or kitchen, where towels, bathrobes or tapes are usually placed.

The most simple

This option is used most often and it has a lot of variations that can be combined and combined. In order to make such a design, we will need:

• the material from which the hanger will be made;
• hacksaw or jigsaw;
• fastener;
• roulette;
• corner;
• level;
• pencil or marker.

The easiest solution will be a hook bar. For her manufacture, we need a wooden plate (it should be without cracks and chips, as well as well dried), you can use a part of the chipboard or MDF sheet instead. Its length is selected for your needs, and the width should be sufficient to place hooks on it. Wooden base can be covered with varnish or veneer, the plates do not need it, because They have already caused laminate. After that, several holes are drilled in the wall (their number will depend on the total length).

The distance between them should be so that the edges of the board turned out to be 5 cm. In order for the holes in the same plane, the construction level is applied. Dowels are inserted into the holes, and the base is screwed to them with the help of screws. Hooks are already attached to the plank. If you choose a good fastener, then such a design is able to withstand heavy upper clothes.

With regard to hooks, you can fantasize. Instead of buying them, you can apply, for example, old wrench. At first they are cleaned and polished. After that, bend. They are drilled in two holes, and the keys will be screwed to the bar. For these purposes, you can use forks. Just take steel, because Aluminum is very fragile. You can give an interesting shape to the tooth.

There are also knots from trees: it is necessary that such a bitch is located on a small branch. To fix it to the base, you can break the plane of the branch slightly with the grinding machine, after that the hook is simply screwed up with self-draws. Optionally place them in one row. You can make them at different levels. If you draw a note mill, then the hooks will serve notes. A rectangular plank is not a requirement. On the round - hooks can be twisted as numbers on the clock, and in the middle to draw arrows. In addition, the base can be performed in the shape of a heart, clouds, sun, etc.

It is important that the wall under such a hanger is with the final finish, but not whiten. It is necessary that things do not get dirty.

Complicate

So that things do not get on the wall, you can improve the entire design slightly. You must take two strips of the same size. Their length must match the width of the planned design. They are fixed in a horizontal position parallel to one another (one above, the other below). Next, they fix a few more vertical slats between them (we do it with the help of self-tapping screws, the length of the fastener should be twice the thickness of the planks, so that they are good to pull them together.).

In width, they can be like two previous or a little thinner, in length - 1-1.3 m. If it is a hanger in the hallway, it is good on top to attach a shelf for hats and caps. To do this, you will need a 25 cm width board (you can take several elements of smaller in width and secure them with each other with two jumpers). It can be fixed to the overall design using metal corners or wooden windows.

There is another interesting option. For its manufacture, you will need a bar with dimensions of 5 × 5 cm. They need 7 pcs. 30 cm each. For the start of the board are cleaned with a grinding machine. Sharp corners can be smoothed. After that, cover them with several layers of varnish. Further, they will need to fasten to the wall using a perforator and self-tapping screws. It is necessary to arrange them in the form of two letters n, which in the lower part are connected by the jumper.

In each bar using a 15-20 mm feathery drill, we produce two holes. Next, cut out cylindrical seasons with a diameter under our hole. We clean and stain with the color of hangers. We scroll them with PVA glue and blend, let it go well.

Most likely, you will enjoy a hanger in the form of a tree. To make it, we will need a sheet of MDF, chipboard or plywood. With the help of a marker we applied the outlines of the plant. Next, pierce the resulting figure. The ends are processed and painted or covered with edge (in the case of chipboard). With the help of self-samples, the product is attached to the wall, and hooks are hung on the twigs. Here you can apply real knots, as in one of the previous options.

Ceiling and tremende

Hooks are not always a way out of the situation. Often you need to have things having fun on trempels. In order to ensure this, it is necessary to provide a horizontal bar. In this role, you can use, for example, a wooden bar 50 × 50 mm. The sharp sides are better to round through the grinding machine, then the hangers will be able to move freely and they will easily shoot them. If the bar is a long length, then it is necessary to provide a horizontal jumper. Such a rod can be consolidated to the holls with a shelf, which was mentioned above. Instead of a wooden holder, you can use a special furniture chrome tube. She is fixed with the help of flanges.

You can not use the wall at all for fastening. For this we need a chrome tube. Cut off the two pipes with a length of 90 cm. I fix the two flange to the ceiling (the distance between them is chosen according to the need). Insert and fix these pipe segments in them. Next, we take another tube, its size will be such that it fit between two hanging nozzles. Mount the horizontal tube to vertical using the corners. It turned out a minimalistic hanger under the tremendous.

This article is created in order to give the direction to your imagination, and not provide all possible options. We are confident that everyone's houses have things that can be used in an interesting way.

Video

See what hanger can be made from just a few dashed:

Photo

25.11.2016 23:54

Not every house has a place for a full-fledged dressing room or a spacious cabinet. And even if there are those available, does not mean that there is no problem where to throw a robe or handbag - a hanger at hand will never be superfluous.

The simplest, stylish and at the same time a cheap idea is to make a hanger from the trunk or tree branch with your own hands. Rustic style is very moden today - residents of large cities tend to bring a small piece of wildlife into their interior. And even homeowners living outside the city prefer the atmosphere of country life as outside and inside the house.
Sufficiently many trading furniture brands draw their design in the rustic form and invoice, so whether it is worth spending a decent amount to acquire a stylish subject of the interior if it can be done with your own hands without much effort.
Below you will see hangers created by designers as a replica, imitation of natural wood trunk and hangers made from the present trunk.

The outdoor hanger from the tree trunk in the bedroom or hallway will not just solve the problem where to hang clothes or accessories, but will also become a pleasant accent in interior design.
The appropriate trunk can be found in the nearest park or in the forest. It is enough to cut unnecessary branches with a secateur, while keeping their "hooks" at the base of the barrel of the desired size. You can clean the trunk from the bark or leave in kind - it all depends on the intended design.
In addition, a tree hanger can be painted in any color in the tones of the interior or play in contrast.
For outdoor hangers, it is enough to come up with a solid base as a weighting agent - it can be a heavy wooden slice or a backup.

If you managed to find a fairly high trunk - the hanger can be installed in the entire height of the ceiling. Here it will take the accuracy of the calculation, but it will not be needed additional fasteners.

From the tree trunk with branches, several small sections can be selected. Securing them on the wall, on the blackboard or in a charming frame, you will get a nice and very functional hanger of several hooks. Such a suspension system does not occupy, very convenient and at the same time has a surprisingly cute decorative effect. Wooden hook hanger from the trunk will have to the yard in the bathroom or in the hallway, and, of course, in the kitchen - there is always a lot of smallest things that need to be suspended.

Another interesting way to attract the trunk of a tree to the decoration of the house - it can be suspended to the ceiling or in the window opening. And this suspension rustic decor can serve as a support for hanger hangers.

You can use a pretty tree branch for storing your favorite jewelry, jewelry or just decorate it with family photos, homemade hearts, beautiful baubles.

Tree trunk, branches, spins and cuts are often used in the Decore of the Scandinavian interiors or country houses, for example, chalet - so actively use this rustic decor in the design of such interiors. In cold industrial interiors, loft, sympank also add rustic accents to give the interior small warm barcode.

Below you will see a lot of amazing examples How to use a tree trunk in the interior design and home decoration - a hanger from the trunk or tree branches with your own hands! Inspire!

Note - What a zeal to nature has modern designers - we see in the decor: type a tree, like moss and even dirty boots ... type)

The ideas of interior design do it yourself, the ideas of interior design, the ideas of the decor do it yourself - Inspire!

What can be made of snags for home Shelves racks showcases from stairs

The corridor of the cozy residential premises begins with an important attribute - hangers. Thanks to her, it is possible to clean up the hallway. This indispensable piece of furniture can be bought, and you can get a hanger with your own hands for clothes. If there are elementary skills, desire and sketch of the finished attribute, then you should not stop, you need to make it yourself.

To the hallway was cozy, It is necessary that all the furniture in it be perfectly chosen in color and style. It's troublesome business, it is necessary to approach him with full responsibility.

The hallway in the standard apartment has very small sizes, so put there a wardrobe or chest of drawers there is not possible. But the clothes hanger must necessarily be, it will be the only subject attracting attention.

So that your entrance hall is different from others, you need to make the main attribute of its own hands. This will not only increase the rating of the owner, but also create a unique atmosphere in the entire apartment.

Many models. They are used for clothing and for small accessories. Wall and floor structures are found, which are equally well "performing their work." Any of two options can be made independently, the main thing is to be accurately represented as it should look in the finished form.

Advantages and disadvantages

If there is no place in a small corridor, then you can make a small, unusual hanger. It will serve both clothes and umbrellas or bags. Wall-mounted hanger for clothes with their own hands make it easy. From the materials will suit:

• wood;
• plastic;
• metal.

The advantage of the design is:

• compactness;
• functionality;
• a variety of forms.

Such a model is suitable for a small hallway. In addition to hooks, it can make shelves for storing hats, gloves and other accessories. Under it you can put shoes, and bags and umbrellas can be hung on extra hooks.

For the manufacture of such an indispensable item, you can use various materials, combine them, thanks to your fantasy.

The disadvantage of it is stationarity and the installation itself, in the process of which you have to drill holes in the wall. In case of incorrect or fragile installation, there may be problems in subsequent operation. And if during the permutation you want to transfer it to a new place, then you will need to remove the hanger and repair the wall.

The simplest model of such an accessory in the hallway is Planckon which hooks are nailed. The description was not colorful, but if for its manufacture, take the exclusive material, then the product will turn out exclusive.

If a wooden plank is taken for the product, it can be treated with different methods: grinding, colorful, etc. Hooks for hangers can be from real wooden hooks, metal hooks, from door handles and other material. They can be all the same or different, which looks very unusual.

So that the child always undressed himself, he needs a fun hanger. In this case, you can look after children's hooks in the form of cartoon characters or beloved animals. Because children's things are not so heavy, hooks for the product can serve any interesting plastic toys, for example: balls, cups, etc.

Small size rubber animals can be attached to the bar using a superclone or special glue for rubber.

To the hallway in the house looked original, you can kill different hooks in chaotic order to the wall, where there will be hooks for a child.

Old forks or spoons You should not throw out, you can make excellent hooks for the hanger, if you slightly bend the end. If the storage room occupies a place for old anyone not the necessary skis, they can be used as a plank for hangers. It is necessary to refresh them a little with paint, and nail decorative elements that are hooks. Seeing such beauty made by yourself, your guests will envy you.

For those who do not know how to work with a tree, but wishes to have an original product, there is a way out. In the store you need to buy a special decorative self-adhesive film, imitating a wall hanger, and glue it onto the wall. It remains only to choose the material for hooks and attach them to the wall.

Find a lot of fresh ideas, as well as master classes on the manufacture of wall structures, can be on the Internet.

Outdoor designs are different, so not all of them will be suitable for residential premises. Consider their options in Read more:

Pros and cons

This item is not only functional, but also stylish. Showing fantasy, you can give the product the most unusual forms. The advantage of hangers is:

• mobility;
• lack of installation work;
• large selection of forms.

Mobility - An important feature of the design that becomes more noticeable during the repair, when permuting and even with a complete change of the style of the room.

During the installation of the outdoor accessory, it is not necessary to make holes in the wall and spoil the decorative coating. If the hanger is not needed in the summer, then it can be simply transferred to another place or hide into the storage room.

Models of floor hangers are distinguished by sizes, material and forms. The product made by your own hands will fully fit your tastes and the selected room style.

Most outdoor structures have one drawback - dubious stability. Before proceeding with its manufacture, you need to provide maximum safety and stability. To the reverse side of the legs, the supports should be attached, the so-called, sole, so that the material does not scratch and did not spoil the floor. On the hanger there should be no pointed components that can damage clothes.

This model will differ from the wallSince it will take some place on the floor for its location. It will be more difficult to make a product, but it will not be able to stop a person who tries to decorate the interior of his home exclusive things.

From the old tree

The easiest option is to use an old tree painted paint. Of course, there should be durable branches on his trunk, which will serve as hooks. The stand for such a hanger can be any heavy flat object, the form of which does not matter.

If you have wooden stairs after repair, you will have a wonderful hanger. The length of the bar is selected, which will fasten the stairs. It is nailed from above so that one staircase is on the one hand, and the other on the other. At the height of the first or second stage, the shelf from the board is made from below. Its edges are also fixed with nails.

Depending on how many stairs at the stairsAnd what clothes will hang on this hanger, you can make another shelf. Things on such a model hang on hangers, which makes them always straightened, well-groomed. By the way, it can be painted in any color. The main advantage of such a design is that it can accommodate a significant amount of clothing.

For making at home, flooring-floor-laborers, you can use round or profile metal or plastic pipes. To get a steady product, 1.7 meters high, it is better to take sewer pipes 60 mm. The reason is better to make square. A detailed master class on the manufacture of such a design can be found on the Internet.

If there is an old floor lamp in stockYou can use it as a basis for the product. You need to remove the old lampshade and remove the wire. Come on the hooks, or use the wire frame of the lamp. If the floor of the lamp requires painting, then you need to prepare work, but only after them - paint the product.

Very nice and original will look at the product made with your own hands with forged metal elements. The design models can be found on the Internet, wrought-iron elements from artwork masters. To assemble a hanger from the details obtained, a welding machine will be required. After connecting parts into a single design, it is necessary to degrease it with a solvent, and then paint.

Worn hangers always look stylish. They can be added to the interior in the classic style. Openwork wrought iron elements are perfectly combined with attributes of various styles.

The ideas of making hangers for clothes do it yourself: photos and drawings of hangers for an entrance hall. Diverse options for making homemade hangers for clothes.

The clothes hanger can be made with your own hands from practically the girlfriend who are lying at home without a case. Folk craftsmen do not cease to surprise their ingenuity, this is a clear example homemade hanger for clothes from ordinary forks.

A similar option of hangers from metal spoons.

Clothes rack from the pallet.

Here is a clothes hanger from the pallet, and again the old pallet was applied. The wooden pallet is cut into two parts from each half of the pallet can be made along the hanger, it is enough to paint the workpiece and attach screws to the hooks.

Another option of the pallet hangers, the whole wooden pallet is used here, it is grinding sandpaper, staining the boards in different colors and attach hooks.

Wood hanger.

Such a hanger is more suitable for the cottage or bath, as hooks here are used wooden swirls, fixed in a wooden structure.

Hanger of metal profile and bars.

The design consists of several bars and metal profiles of fastened.

Wooden hanger with your own hands.

Here used a wide board with imitation under a piece of old wood, clothing hooks are made of bars and fastened with screws screwed on the back side of the board.

Wood is burned with a soldering lamp than and the original product texture is achieved, the final stage of the coating of the hanger with a transparent varnish.

In this embodiment, it was not without carvings.

And in this design, door handles are used instead of hooks for clothing, which can also be covered with paint.

An interesting option of hangers from boards.

Original homemade hanger in the form of a tree.

For the manufacture, a thick plywood is used, the contour of the pattern of the tree is drawn and is muffled with electric jigsaw. The design is painted and attached to the wall of the dowels.

Hangers for children's clothing.

Details of the hangers are cut from plywich from plywood and paint bright colors, so you can make a hanger in the form of animal figures.

Outdoor clothes hanger do it yourself.

The easiest option of the floor hanger for clothes from pipes, for the manufacture you will need a thin pipe from aluminum 2 - 2.5 m. The pipe must be used, as shown in the picture and clothes hanger is ready.

Wall hanger from pipes.

And this hanger consists of a drawing on the wall, the hooks for clothes are attached to the dowels right into the wall.

The first subject of the interior, which sees a visitor or guest, entering the apartment or office, is standing in the hallway hanger. Depending on this, it is an impression or opinion about all the premises and the owner of the house. The range of equipment intended for storing clothes is very wide, so there are ample opportunities for interior design (, corridor, hall and others).

Floor hangers on wheels are very comfortable and practical in the interior of the apartment. They can be used for the hallway, in or rooms, on the veranda. Modern designers come up with and give such a piece of furniture various forms and interesting figures.

Advantages of floor hangers for clothes on wheels:

What is the name of the clothes hanger on the wheels (views and photos)

Usually it is called: hanger on wheels. A little less often you can find another name: wardrobe rack on wheels.

Outdoor rack hanger on wheels has become a permanent attribute of various clothing stores. Frequently used such racks in locker rooms, wardrobes and exhibitions and sales. Clothes on them hanging on hooks or on her shoulders. The wheels, which are located at the bottom, create additional convenience for easy and fast movement even loaded hanger things.

Depending on what material made, hangers are:

• metal- have a lot of weight, stability. For the manufacture uses chrome aluminum, which, if desired, can be painted to any colors;

Metal hanger on wheels

• wrought structures - Unique in appearance, serve as an additional decoration for the room. Very practical and comfortable;

Wrought hanger on wheels

• wooden hangers - Have an attractive appearance, durability. For the manufacture uses various wood species. Suitable for different styles of the interior: ranging from classics to fashionable loft and country;

Wooden hanger on wheels

• plastic models- too light by weight, so can only be used with a small number of things.

Floor hangers on wheels are the most comfortable and common type of equipment for locker rooms in school institutions, offices or apartments.

Women's hangers - Wooden or metal?

Metal hangers on wheels

Due to the simplicity of the design of metal hangers on wheels, it can be mobile to move around the house. The hanger can be decorated with various decorative elements, which will decorate the home interior. If the room is clinging to other things or details, you can simply move the hanger to another room.

The designs of metal hangers can consist not only from the stands for the shoulders, but also be supplemented with boxes and shelves for various accessories. The shelves can be made of metal, wood or other material.

Photos of various models of racks on wheels:

Wooden hangers on wheels

The peak of the popularity of wooden hangers fell on the twentieth century, but now they are re-gaining popularity, they are often used in the hallways and other rooms. The advantage is their decorative features: they fit perfectly into the interior of the room, made both in the classical and in the modernist styles.

Modern hangers on wood wheels produced by an industrial way are several species. They differ in purpose, sizes, appearance and variety of wood, from which are made:

• Suit hanger- Usually medium heights are used for individual use. It can be overwhelmed with jacket pants and other details of a business suit. It is intended for one person, so most often these hangers put in the bedroom, office or hotel room. The advantage of hangers is the failure of clothing during storage.

The same hanger can be supplemented with a shelf for shoes below:

The size of such a hanger and height is selected by age and the growth of the child, for example, for a small child, a low hanger "Kid" is suitable, with comfortable boxes at the bottom for books, handbags and toys. Baby hangers are always beautifully decorated, distinguished by bright colors, and the wheels allow you to easily move such a thing in the room you need for the kid.

Children's wooden hanger on wheels

The reliability and stability of children's hangers is ensured by its cabinet design. It will be convenient that you can approach such a hanger from any side. Wood hangers are manufactured, polyurethane varnish are coated to avoid scratches when used.

For older children and in model racks, which can accommodate more clothing raves on her shoulder.

Wooden hanger on wheels for girls

There are also small models designed specifically for suturing school uniforms: a dress or pants on such a hanger will not be remembered, as it hangs on special crossbars.

Wooden hanger on wheels for school uniform

How to choose a hanger on wheels

In the home interior, the hanger is used for outerwear, storage of bags, umbrellas and other accessories. It saves space and can be used in various configurations suitable for this room.

The main question when planning and buying hangers on wheels is its purpose. Depending on this, the owner of the apartment and chooses the desired model. The hanger is also selected under the interior of the apartment or office:

• If necessary hanger for one person it is better to choose costume Wooder Hanger. Put such a hanger better in the bedroom for individual use or in the office of the office leader.
• For shops and exhibitions Better fit durable metal rack hangerswhich are withstanding a lot of weight (if a lot of things) and they will be comfortable to move indoors as needed.
• For selection of hangers in the hallway apartments or at home need to be repelled OT. design in the interior. If the interior is made in a classic style, the best options will be a stylish wrought hanger or a wooden hanger with decorative jewelry. A metallic chromed hanger is suitable in the interior of the house with a more modern style.
• The best option For the children's room Will be children wooden hangers selected by the growth of the child And decorated in accordance with the interior and his wishes.

Hangers for clothes on wheels do it yourself

Wooden homemade hanger. The original solution for decorating the interior of your house will be an outdoor hanger on wheels, made of wood with their own hands. Each homemade master will be able to do this.

The design is very simple: width 1 m, height 1.3 m, a plan, see photo:

• For work it is necessary to buy 2 vehicles with a size of 40 × 40 × 2000 cm. For the upper crossbar, a stalk is well suited from the shovel. Details are collapsed according to plan:

• The greatest difficulty is to make stable bottom hangers. To make the crossbar exactly at an angle of 45 to the bottom it is better to level the joint with the help of a square. Then you need to fasten the rails. Design of lateral part is ready:

• Similarly, the rail should be cast in place of connecting two sidewall at the bottom. For strength, all joints can be wrapped in PVA glue:

• The upper crossbar is screwed with long screws. On the bottom the wheels that can be bought in the construction store are screwed.
• That's ready hanger on wheels - the dream of some housewives. Its cost turned out about 150 rubles ($ 5):

Hanger on wheels from pipes with their own hands

The hanger is made of metal tubes with a diameter of 22-25 mm. You will also need wheels, screws and drill.

• For vertical base, you need a pipe with a length of 1.3-1.7 m (2-3 pcs.). Horizontal are turned into shorter - 0.7-0.9 m (4-5 pieces) and used as lower crossbars.
• One of the horizontal pipes connects two vertical pipes to gear with the help of screws, the remaining attached closely. Thus, these bottom pipes form the bottom of the hanger.
• Similarly, the upper crossbar is screwed, bonding all the construction.
• You can put the entire design on the wheels, they are attached in the corners of the base.

See also video how to make an outdoor hanger with your own hands: