Spinner rapidly conquers the world. Millions of people from all over the world turn and throw this toy at work, in car traffic jams, at home, on a walk, in line, etc. Spinner - powerful and at the same time very simple and affordable antistress, which helps to get rid of tension and relax, not attracting attention. Spinner became so popular that the people began to extract various tricks with him. This toy loved everyone from Mala to Great: it is cool and kids and preschoolers, and large bosses in modern offices.

Spinner - the thing is available. If at first they could only find them on the network, today they are sold literally on every corner, and there is a very budget options. but homemade spinners not inferior in popularity ready options: Network users are actively looking for how to make a spinner with their own hands at home. And it is easy to explain: homemade spinners are unique, made of healthy materials, and their manufacture - also a kind of anti-stress.

We offer you several options for the manufacture of this accessory. The first is the most time consuming, the rest is slightly simpler. Choose the one that will seem most clear to you and most like it.

Option One: not an easy but interesting

We will use valid only tools. We will need:

• wooden sticks from ice cream (20 pieces);
• bearing from metal or ceramics (if you want the spinner to spin it easier and longer, make a choice in favor of the last) size of 8 * 22 * \u200b\u200b7;
• 50-penny coins (in its center do the hole with a seboard) (12 pieces);
• small in size and diameter of nuts and bolts (4 pieces);
• buttons from jeans or jeans (or the simplest stationery) (2 pieces);
• glue;
• sandpaper;
• paint (it is more convenient to take aerosol).

How to make a spinner?

Step 1: Billet

We take two wooden sticks and cut each into two equal parts (along). That is, there are already four at the exit of two sticks.

Now we take five whole sticks, tightly press each other and on top of the glue layer. We put on top of the second reservoir from the sticks: put four integers to the center, and at the edges we put the previously cut wands. Cover the layer of glue and their. The third layer will consist of five whole sticks (as well as the first). The fourth and last layers are the repetition of the second.

At the outlet, we have the basis consisting of four layers of sticks glued together.

Step 2: Main work

Spinner size choose for yourself. We will tell you the example of the 9 * 9 square, but the proportions can be freely changed.

Make marks on the workpiece and cut the square (say, 9-centimeter).

Now inside the square we draw an equilateral triangle. For this, one of the sides of our square is divided by half and forth the two sections of 9 cm from this point, and then connect the ends.

Then each side of the triangle is divided smoothly in half and make a serux. Connect each sector with an opposite vertex. The point of intersection of these segments (they are called medians) - the center of Spinner, in which we put the bearing. Circle its contour pencil.

On the same segments, make a seat at a distance of 2.5 cm from each vertex. In the center of each of them, place the coin (the hole is needed to combine a hole with a serif and not to get back) and circle it with a pencil.

With the help of sewn or acute knife, catch the holes inside the circulated circuits. And then loosen them to cut smooth holes. You can press the bearing and coin into the workpiece (but carefully, so that the glued pars are not separated).

Cut the triangle from the workpiece. Now we make two-chamber serifs in the center of each of it. Like this:

Sex height on median is 7 mm. Cut these side triangles.

Step 3: We carry the gloss

We take the sandpaper and sand the surface of the future spinner. We take place around the edges. Keep the workpiece on both sides and leave to dry.

Step 4: Loads

We glue four coins with each other. We will have 3 stacks that we insert into our holes in the spinner. In the center put the bearing.

To turn it easier, in the center of the bearing put the buttons or buttons harvested earlier and glued them. Ready product You can cover lacquer.

Tip: If you own the jigsaw and drill, take a note of the scheme from our instruction and make the spinner body not from sticks for ice cream, but from the usual wooden panel. Then just sanding your workpiece by sandpaper, paint and cover with varnish.

Ready!

Option Second: the easiest

With the help of a superclone, adhesive gun or cold welding We connect with each other three or more bearings. Video master class on the manufacture of Spinner at home below.

Option Three: Energy Commodity

Reliable to connect bearings not just glue, but also the case. For this, conventional ties are suitable, as well as wooden (as in the first method), plastic and metal housings. On how to do them, see the next master class.

Option Fourth: for cyclists

If you have an old bicycle chain, this method of manufacturing spinner do it yourself for you. True, you have to work well to make this popular toy. The chain is laid in a special way, fasten it with a screed, fix it, put the bearing into the center. Check out the video, which presents a detailed step-by-step instruction.

Fifth Option: If you do not have tools for drinking, but I still want to make a spinner

Spinner of paper or cardboard is also an excellent version of this toy. It will spin no worse! Relieve cardboard and circula, cut out 4 circles of equal diameter from it (definner size, it is not fundamentally), glue them with each other. Take a bright cardboard or paper so that the toy is more pretty and pleased you not only with your properties, but also appearance.

Bearing holes make a slightly less diameter of the bearings themselves. It is necessary so that they sat tightly and did not slip when you twist your toy. More about the manufacture of such spinner in this video.

Option Six: If there are no bearings, but the spinner is still very necessary

If you do not have bearings, the spinner can be made from simple materialwhich is easier to get simple - from plastic lids. We will need six pieces (take color, so that the toy looks more beautiful and more interesting) and the toothpick or rod from the handle.

We look at how to make a bearing of plastic covers.

Bonus

In the video structure presented below, it is described about the three most simple ways Production of Spinner at home. All of them somehow repeat the last three instructions (No. 4, 5 and 6), but in this video you will also find several important tips For the manufacture of popular anti-stress toys.

Choose the way that you seem most interesting and understandable. It is possible to make a spinner with your own hands in 2-3 minutes, but you can freeze and make a toy in a more time-consuming way. The result will be directly dependent on your efforts. However, whatever way you choose, you will definitely get a cool anti-stress toy that is so popular today.

Views: 5 559

Despite the fact that the peak of popularity is fashionable in 2016-2017, the anti-stress toys began to subsoine, many still seek ways to create an original thing that will help to slander to spend time in long trips, large queues or in heavy life situations. Naturally, we are talking About the spinner made about your own hands. How to create it at home, and that for this you need - more in our material.

What are the spinners and how do they work?

Each twist dismails the individuality of its owner.

Fidget Spinner. - this is a rotating flat or bulk toy that is popular in adults and children throughout ground Shar.. Its main purpose is to occupy and distract . Someone believes that spinner useful because thanks to it you can distract from everyday and psychological problems, relieve irritability, get rid of excitement. Others assure that thanks to the turntance you can concentrate on necessary things , distracted by all superfluous. Whatever it was, the fame of the toy does not need an explanation, because it loves everything literally.

There are many forms of the so-called hand twist. It will depend not only from the invented design, but also in the reserve of composite details. To understand the specifics of work when creating a spinner with your own hands, you need to know only a few important points.

Mandatory traditional elements of Spinner are:

• bearing;
• wings.

The most important part of Spinner is the bearing. It is from him that will depend on how long and quickly will turn to the toy, as well as him sound accompaniment and vibrations published. In many homemade toys Bearings are often replaced by primitive designs of toothpicks. which also allow you to spin the wings of toys.

Wings, or petals, can be from two to six But often you can meet two or three petals. It is these elements of Spinner and give a scope for fantasy, allow you to embody bold ideas, show personality.

Unusual design One of the most primitive forms of toys - round.

So-called twisters made from plastic, metal, wood, cardboard and many other materials. Often materials are combined. Recently, plastic or metal toys have become relevant luminous wings.

Products from plastic, wood and copper.

The design of many made by their own spinners amazing imagination. Many decorate their toys interesting engraving, illustrations, icons . The small spinner model placed on the palm allows you to characterize its owner without unnecessary words.

Spinner in the form of Snitch.
Fabulous illustrations and details look very interesting on spinners.
Male design turntables.
Recently, the toys glowing in the dark are very popular.
Fidget-spinners in female design.

Today, the spinner can be bought almost in any store. There are models of budget, and there are expensive original or even designer. But in order to stand out from the crowd, you need to make a certain effort, for example, make it yourself original thing For yourself or your child, relative, friend (for example, as a gift). If such a fashionable product as Spinner asked the baby - the better, because it can be attracted to the creative process, starting from the selection of the model, and ending with the creation of a memorable toy.

General instructions before work

Before starting work on your spinner, you need to have an idea that it is a person who wants to get as a result. To not disappointed the result, you need to work according to a simple scheme.

• Step number 1 - We select the model and design

As possible models Spinners There are countless, and we are all different, and we like different things, you can first choose suitable model From simple. It is necessary so that the process does not turn into punishment. Or you can go to another way, and choose the most original model Of the special material unusual shape. This option is suitable for those who have already tried to create things with their own hands.

Options for creating Hand Spinner do it yourself.

• Stage No. 2 - Blacks and Draw

So that everything works out is to take care of the drawing on 1: 1 scale. You can depict a future model of Spinner on paper, and you can search for ready pictures on the endless spaces of the Internet.

Drawings and blanks.

• Stage №3 - Produce tools

Now that the creator decided on the design, and schematic image Ready, you can begin to prepare all the necessary materials.

First of all, it is worth buying (or remove with old technology) bearing. It can be made of metal or ceramics. The most acceptable option is a diameter of 2 mm. To ensure a pleasant pastime in the future, professionals advise Clear Lubrication Detail In the "bath" from gasoline before it turns out to be in a toy. Why clean the bearing from lubrication? She makes the rotation slower, besides, dirty hands, clothing and furniture.

In addition to the combined parts of the spinner, the following tools will also be needed:

1. Construction marker (pen, pencil, ordinary felt-tip pen);
2. Scissors;
3. Stationery knife;
4. Elements decorative finish (optional);
5. Glue;
6. Special tools to create wings you need (Tools for wood or metal).

Preparatory stage.

• Stage №4 - Create Spinner

When the preparation is over, you can safely start making a toy with your own hands. Next, consider several popular options for creating spinners from different materials in several ways.

Varieties of twilight for the hands of created from the primary means.

Spinner of paper and cardboard without bearing

The most popular option for those who are in no hurry to run behind the bearing and cut out of metal or tree stoke - make the first simple spinner of cardboard and paper. Make it with your own hands is really easy, and if you show a little more fantasy, the simple cardboard can turn into an original canvas for your favorite icons or drawings.

Tools for work:

1. line;
2. compass;
3. pencil;
4. a pen;
5. scissors;
6. stationery knife;
7. cardboard;
8. glue;
9. toothpick;
10. nut - 2 pcs.

Step by step work can be viewed on the video:

With the help of plastic covers

Another simple way to create spinner with your own hands, which will require a little longer, is a model from ordinary bottles. By the way, this method also does not require the presence of bearings. Here is a small phased instruction.

Tools for work:

1. lids - 4-6 pieces;
2. plasticine (you can kinetic sand);
3. glue pistol;
4. glue rod;
5. lighter;
6. awl;
7. stationery knife;
8. toothpick;
9. scissors.

Progress:

• Three covers (or more, if Spinner has more wings) to fill in plasticine almost to the top. I fix it with a layer of glue from the gun, which should fill the lids to the top.
• The main cover remains without aggregate. In it we make a hole with a selection in the very center. To this central part of the future spinner on the sides we glue the lid with plasticine. It is important to do it at an equal distance from each other.
• Take the glue rod and cut off the two equal parts - approximately 1 cm each.
• Toothpick break in the center. Insert it into the central lid and attach a piece of silicone rod to the ends to make it convenient to keep the wood.
• Spinner is ready!

Wooden with bearing

Spinner of wood - the most pleasant and affordable optionwhich can be created with your own hands. Real labor lesson for adults and children!

Tools for work:

• Glue pistol;
• Bearing 2 mm;
• Plywood sheet, thickness 5 mm;
• Several coins;
• Drill;
• Lobzik manual;
• Clamp;
• Scissors;
• Sandpaper;
• Pencil or construction marker;
• Ready Spinner pattern.

Progress:

1. Print the diagram and cut it out. Fall on the plywood sheet and supply. It should be noted the places in each of the circles where the holes will be.
2. We drill the door on the sides of the circles. Additional holes allowing you to cut the beautiful circle figure from the inside of the wing.
3. The future spinner should be cut from plywood pubescoml. Then carefully process the edges and the surface of the sandpaper to the smooth surface.
4. Bearing You need to insert a hole in the center prepared for it. With difficulty, you can use the hammer and drive metal element in wooden.
5. Wings "Kratilki" need to be dragged - for this and will need coins. You can glue the weights for each hole in the following order: a coin with a par value of five rubles, then two, and again in five, as shown in the video.
6. You can cover its paint solid color, and you can decorate another interesting and in the original method - Here is a space for a fantasy, which is so nice to embody your own hands.

Video Creation Lessons

To get used to the creation of spinner with your own hands, you can familiarize yourself with some video lessons on this topic. Creating conditions can be the most different, as well as materials, and styles, but the home spinner may not get worse than the factory.

Here is another way to create paper twisters, this time in the form of Syricen :

naughty hands.

Spinner - like a certain toy, for those who like to rush with a handle or shampooed fingers on the table. It is surprisingly quickly addictive and in some cases helps to focus.

The basis of the design is a housing / rim with a bearing in the middle. To launch it simply hold the spinner with a large and middle fingers, at the same time spinning it index.

Step 1:

Step 2: Necessary materials and tools

• Wooden blank with dimensions 90x40x12 (mm);

• 22x8x7 (mm) Bearing with rubber seal;

• RGB LEDs;

• Battery and holder for CR2032 battery;

• M8x20 mm stainless steel bolt;

• Nuts caps from stainless steel M8.

Instruments:

• Electrolovik;
• Mill;
• Sooting and cooper saw;
• Drilling machine;
• Soldering iron;
• Thermoclaysheaver pistol;
• Forster drill and feather drill;
• Stepped drill;
• Cencle Drill (Roll-Zenkovka).

Step 3: Design and template

Let's start with what we will draw a drawing (we will design the design of the future crafts) Using Google Sketchup, and then use them when making templates for cutting and drilling.

Step 4: Cut the wooden frame

Stop the width of the sawing machine (40 mm) and cut down the blank of the width. Cut the end of the workpiece with a musting saw.

Measure 90 mm and renounce the workpiece of a given length using a mustard saw.

Step 5: Drills holes for battery holders

In order to cut holes for battery holders, we use the forstner drill with a diameter of 25 mm. The drilled holes must be a depth of 7.5 mm.

Battery holders (in my case) have a rectangular protrusion, so they draw rectangles of the corresponding sizes and using the chisel to choose the marked areas.

Step 6: Drills a hole for the bearing

We use a feather drill with a diameter of 22 mm for drilling the central hole under the bearing. The hole should not be through, from the opposite edge there should be a "wall" with a thickness of a couple of millimeters.

Then in the "wall" drills the hole with a diameter of 20 mm. The 2-millimeter side will perform a stop for the bearing.

Step 7: Drills holes for LEDs

Using a stepped drill, drill a hole with a diameter of 6 mm for LEDs. Upon completion of the work, we will pass through the holes of the Zenkovka drill.

Step 8: Form contours

To give the spinner of rounded forms we use reliably fixedinverted by an electric bison. You can use ribbon saw or a logging machine.

Delete a paper template.

Rounded edge crafts Using the milling table. After that, sanding the surface with sandpaper.

Step 9: Varnish the wood

Cook the wooden billet with several layers of varnish.

Step 10: Ship out LEDs

The next step is soldered the conclusions of the LEDs to the battery holders.

The long output of the LED is soldered to the positive terminal of the battery holder, and a short output to a negative terminal.

The LED is better to have directly under the hole at the base of the battery holder than between two soldered terminals.

Put on a small piece shrink tube on a short output of the LED. With a long output, we have done the income operation.

After we have a LED above the hole, begged the long output around the positive terminal, and the short one is negative. Solding them. Cut off the protruding parts of the terminals with knife / side.

Step 11: Mount Indication

Before assessing LEDs, advise you to test them for performance by installing batteries to holders.

Use the thermocons to attach holders in the holes.

Step 12: Remove the factory lubricant

In order for the spinner to spin quickly, clean the bearing from the factory lubricant.

Remove rubber seals From the bearing, hiding them with a screwdriver, and then process the "in-law" WD40. It is important for us to completely clean the bearing.

We also clean the rubber seals, and then set them into the bearing.

Step 13: Fresh axis in bearing

Now we need to cut off the hats of the bolt. Cleash it in vice and cut off everything excess with the help of a metal hacksaw. Processing edges with a file.

Note: Instead of a bolt, you can take a hairpin, sewing it under the desired size.

We produce a "hairpin" through the bearing and screw the cap nuts on it on both sides.

Step 14: Fix Bearing

Install the reliced \u200b\u200bbearing into the seating hole. For a lot of reliability, we scroll the hole superclosure.

Step 15:

Turn on the LEDs by installing the battery to holders. LEDs change color glow very quickly.

In order to turn off the LEDs, fasten the small strips of thin plastic between the battery terminals.

I hope you liked this project. Thanks for attention.

On the Internet, I found that spinners make from unnecessary bearings.

What is Spinner (Spinner)?

Under the end of 2016, the new trend porch America. A little more and our countries will also not silent from the English word Spinner, literally - rotator. On the Internet they write that this is a very effective tool of self-regulation that it is necessary to use it for removing the feeling of anxiety and for soothing, to reduce stress and excitement. Also, the toy will help increase tactile sensitivity and develop small motor Hand fingers, which in turn contributes to the concentration of attention, the development of intellectual abilities, strengthening memory. In short, the spinner is an antistress.
Looking at various optionsI came up with and drawn my own. And now I want to share with you instructions for creating spinner.

Do spinner with your own hands

Print and cut the spinner drawing.


Cutted stencils glit to a piece of 10 millimeter plywood. The thickness of the plywood should be equal to or be slightly larger than the width of the bearing. With the help of the electrolybiz, cut out the blank along the contour. At this stage, the main thing is gently cut down the concave surfaces, because in the future it is difficult to treat them the harder. The curved surfaces are also desirable to chop as close to the contour as much as possible, but as it is easier for them to get any tool, it is not so critical.



To increase the moment of inertia, we must provide weights. Most. simple optionIn my opinion, coins are glued together. For 10 mm plywood, it is necessary to glue 8 10-kopeck coins. Since 2 external coins will decorated, while we are making loads of 6 coins.


The inner surfaces of the workpiece align with the help of the borders. The outer surface is gently and quickly brought to the contour with a grinder with a grinding circle. All the remaining irregularities are removing manually by sandpaper.


Placed and drill the centering holes. First on the tree, drill holes under the bearing and weights. I use the bearing 608 with an external diameter of 22 mm, so the central hole is drilled by a pen 20 mm. And the diameter of a 10-kopeck coin 17.4, so the outer openings drill with a diameter of 16 mm. In order not to damage the outer layer, you must drill holes up to the middle, and then, turning the workpiece, continue on the other side. Bearing can be used by anything, it is not necessary to take the same as I.


Bormashinka brought all the holes for the diameters. The main thing is that the bearing has a landing with tension, otherwise it will have to incur. Holes under the weights need to be done so that the coins can easily be in them.
To facilitate the design, we will remove the radius radii throughout the perimeter of the workpiece. I did not foresee this moment in advance, so I had to damage the borders. IN new version This drawing has already defame already fixed. If someone wants to make his spinner even easier, then you can cut the workpiece that is why the contour.
Completely finished with grinding, go to the shtlock. It is necessary to cover the piece of putty in order to finally hide all the irregularities, and so that after painting it was not clear from which the spinner is made.
While driving putty prepare the upper coins to painting. Neatly in order not to fit the skin from the fingers wechly upper layer with 6 coins. It is easiest to do this from the side of the nominal. With the same success, you can half off the coins in vice and go through it with a file, and then flip and walk again.
Two layers include a yellow aerosol coin. Between the layers we give the paint a little silent. When the putty dry sucks the unnecessary layer of fine-grained sandpaper. It is also necessary to remove the entire putty from the surface of the holes, otherwise it will fall off when pressing the bearing and coins and will be seen not colored layer.


Fully processing the item, cover it in two layers of black paint from the can.


After all the details dried up to the assembly. On the one hand, insert 3 decorative coins into the case. On the other hand, we apply super-glue from pressing weights. At the same time, the main thing that the first coin does not fly out, otherwise it is possible to drink the body with glue, and also scratch it. We also apply superlocks and prescribe the remaining coins, while holding the coins on the other side.
Before installing the bearing in its place insert a wooden chopper for holders into its inner hole. The chopper should sit tightly and perform from the housing of 1 millimeter on each side. Press the bearing into the nest.
In principle, the spinor is ready and works fine, but you need to hide the bearing. I made such medallions from plastic and glued them to a chop. If you want to do something like that, you can cut two disks from plywood. Well, if you are too lazy to bother, you can use two coins or buttons as holders.
Before testing the spinner, we definitely give adhesion to dry completely.
That's all, the spinner is ready!


It turned out a very original trinket to take hands. In addition, I can confidently say that neither you nor your familiar ever seen anything like that, so such a thing can be surprised and, although not for long, to attract the attention of others. I, in turn, pleased that I found any use of an incomplete bearing. Later, probably, I will make a two-blade spinner from the second bearing. If you are interested in this topic, write about it in the comments and I will safely make another instruction.

Photo Spinner

Buy spinner cheap with free shipping

Well, if you do not want to spend time on the manufacture of Spinner with your own hands, you can buy it in our online store with free shippingby passing the link

From a plastic card.

Spinner is a fashionable, branded alternative to kidok. Very popular thing in England, and all over the world, thanks to the Internet. Cool toy - Hand Spinner - is a simulator for the fingers of the hands, reduces stress.

Everything spinner differ in size, weight, color and made of various materials (metal, plastic, wood, etc.)

Looking at various options, I came up with my own one.

For this it took me:

bearing;

inactive credit cards;

two bolts for 10mm, bolt for 4mm, two nuts for 4 mm;

a piece of sandwich panels;

double-sided tape;

vinyl automotive film.

Production of Spinner do it yourself

Make mine spinner very simple. This is an experimental model and exact sizes No, everything was done on the eyes. Yes, and the bearing in the original should stand Karamic.

W. credit cards We find the center and we drill a hole with a diameter of 18 mm. We cut off the heads of the bolts (they will be able to attend the desired intersament of the WECOM), and from a 4mm bolt with a pin. From the bearing remove the boot. In the sandwich panel, we supply the circuit of the map and drill three holes as in the photo.

We place the head of the bolts into the holes around the edges, and the bearing is in the central hole. Close from above and below plastic cards And with the help of bilateral scotch glue the resulting sandwich. Cut with a knife our product. The edges are gluable carbonic film for auto. Insert a stilette with silicone sleeve and tighten the nuts into the bearing.

Opened spinner With the name and surname of the owner.

For a successful start of operation, you just need to hold between big and index finger Middle bearing and rotate middle finger or second hand.

It turned out the original trinket. If neither you nor familiar ever seen anything like that, I advise you to look at the video with this thing on the Internet. She will attract your attention and maybe you want to make your Spinner !