The best firm of plastic windows. How to choose the right plastic windows? Which company is better

When planning to replace the old frames in the house, many are faced with the question - which plastic windows are better? The quality of a metal-plastic profile depends on the manufacturer and the material that he uses during production. But that's not all: the long service life of a plastic window depends on the right choice profile for specific conditions (climate, building type), assembly and installation quality. Unscrupulous sellers can profit from people who do not understand the characteristics of a really high-quality profile, trying to sell a product of average and poor quality at a higher price. To avoid this, we recommend that you familiarize yourself with the recommendations for choosing a plastic window and the rating of manufacturers based on feedback from consumers and experts.

What is the best profile for plastic windows?

To answer the question which plastic windows are better, you need to consider the main characteristics of double-glazed windows. Starting from technical parameters profile, you can evaluate its quality at the time of purchase, so as not to be mistaken with the choice.

Material and profile uniformity

Plastic window structures are made of a material that is part of the thermoplastic group - polyvinyl chloride. During production, stabilizers, modifiers, plasticizers, pigments are added to powdered PVC. They make the window structure durable, resistant to ultraviolet light and other atmospheric influences. All PVC additives are harmless and do not harm human health.

But you should not choose cheap profiles - usually they add low-quality plasticizers. Therefore, when buying a window system, it is important to pay attention to the presence of an unpleasant odor and too cheap a cost - in this case, there is a risk of purchasing a product with a dubious composition.

To give strength and rigidity to the structure, it is reinforced with metal from the inside. Externally, the buyer will not be able to distinguish a high-quality, reinforced structure from an unreinforced one, therefore, you can check the presence of metal inside it using a magnet.

The coating of a quality profile must be smooth and uniform. A grainy surface with streaks or a gradient is a sign of a fake.

Conclusion: high-quality PVC profile is distinguished by uniform coloration, smooth surface, and has no unpleasant odor. Composition and environmental Safety window profile must be specified in the manufacturer's product certificate.

Wall thickness

The wall thickness of the PVC profile determines how long the window will last and how it will retain its shape from loads during operation. In accordance with the thickness of the outer and outer walls, there are three groups of structures:

The question may arise: which windows are better to put in an apartment of these three classes? Class A profile - the best option... It is used for glazing houses, apartments, offices. You can check the wall thickness when buying at the seller's office - he must provide samples of metal-plastic profiles in a section.

Conclusion: choose a design with a wall thickness of at least 2.8 mm. In this case, it is necessary to ensure that the thickness of the profile is uniform.

Number of air chambers

Air chambers are hollow spaces inside a window unit, which are formed by its partitions.

The more cameras, the better window retains heat, and the higher its sound insulation qualities. The minimum number of cameras is three.

For an apartment, 3 and 5-chamber structures are usually sufficient, they are the most common.

Conclusion: for glazing an apartment in temperate climates a three-chamber system is sufficient. But for glazing a private house with increased energy saving requirements, it is better to choose 5 or 6-chamber PVC windows.

The number of double-glazed windows and their characteristics

One double-glazed window consists of several glasses connected to each other along the contour with a special frame and sealant. Between them are sealed air chambers, sometimes filled with another gas.

By the number of double-glazed windows, window systems are 1, 2, 3 and 4-chamber:

Single-chamber double-glazed windows are the lightest. They consist of one air chamber and two glasses.
Double-glazed windows, as the name suggests, consist of 2 air chambers separated by three sheets of glass.
Three- and four-chamber double-glazed windows are heavy, let in less light than one- and two-chamber ones. Usually they are installed under the condition of living in a harsh climate with cold winters.

Due to their light weight, single-pane insulating glass units are well suited for glazing panoramic windows on terraces, balconies, loggias. But such glasses are too “cold” for an apartment or a house.

The quality of the glass also plays an important role. There are windows with ordinary glass, but there are double-glazed windows with the following features:

Anti-vandal glass coating. It protects the surface from impacts and other mechanical influences, making the glass more durable.
Toning: protection from direct sunlight.
Triplex laminating: when broken, the glass does not shatter into sharp fragments.
Energy saving glass. A special coating shields heat rays from the room back, reducing heat loss in the room.

Conclusion: double-glazed windows are most suitable for installation in residential buildings and apartments, having good thermal insulation properties... But for a harsh climate, it is better to choose thicker double-glazed windows.

Profile width

The profile width depends on the number of cameras. The wider it is, the warmer the window will be, and the more stiffening ribs inside the structure. The second factor speaks of the strength of the PVC block, since small-chamber structures are easily deformed.

Manufacturers produce profiles with a width of 58 to 90 mm. Window systems with a width of 58-70 mm are considered the most common, they are suitable for the normal provision of warmth and silence in the house. Width 58 mm is typical for single-chamber windows with double-glazed windows up to 32 mm thick.

The 70 mm wide construction will provide better performance. Suitable for most regions of the country. This profile is used for double-glazed windows 40 mm wide with glasses of any type.

Conclusion: if you live in a region with severe winters, it is better to choose double-glazed windows with an assembly width of 80 mm or more. They are showing best qualities for heat saving. For other regions, a width of 58-70 mm will be sufficient.

Which company is better to install plastic windows?

Having familiarized yourself with the main characteristics of plastic profiles, another question arises - which plastic windows are of the highest quality? When choosing a brand, that is, a manufacturer of a window block, you can rely on reviews from other consumers, recommendations of friends or expert advice. On the world market, the main leaders have long been identified, so the choice should not be particularly difficult.

REHAU windows

A German mark, but the production of windows in Russia began in 2002. The company provides each plant in Russia with its own quality certificate, so there is no need to doubt the level of the product being manufactured. REHAU is a wide range and high quality:

Window system BLITZ New: 3-chamber windows 60 mm deep. Energy-saving glass with two sealing circuits.
DELIGHT-Design: 70 mm wide 5-chamber windows. Height profile structure reduced, which makes the window leaf wider. Because of this, the structure lets in more light into the room.
GENEO: 86 mm deep 6-chamber windows with an additional (center) seal loop. Provide maximum sound insulation.
EURO-Design: 3-chamber systems 60 mm deep with two sealing circuits. A varied palette of shades, a choice of textures.
BRILLANT-Design: window system with five air chambers and 70 mm depth. Profiles with a smooth, shiny surface. The shade of the profile can be selected according to the RAL scale.
GENEO HST: lift-and-slide window system. Two options: standard and barrier-free.
SIB-Design: 3-chamber system with thermoblock (5) chambers, depth - 70 mm. Thanks to the “thermoblock” insulating chamber, windows are often installed in regions with a temperature difference of more than 60 C.
INTELIO 80: system with 6 air chambers 80 mm deep. In winter, a double-glazed window protects the room from heat loss, and in summer - from overheating by the sun's rays. The system is suitable for the production of panoramic windows.
EURO-Design Slide: sliding system for balconies, loggias, terraces with two sealing contours.
GRAZIO: 5-chamber system, 70 mm deep. Provide good sound insulation, burglar-proof, air and water proof. Smooth surface profile.
INTELIO: 6-chamber system with energy-saving glasses. Low porosity window surfaces are easy to clean.

Veka windows

Veka is a German brand. The subsidiary production company of this manufacturer “VEKA Rus” is located in Russia. The products have been awarded the German quality mark, so they comply with all control standards. Veka profile catalog:

Euroline: 3-chamber, 58 mm wide. Double-glazed window double and single chamber. They make double-glazed windows with triplex, soundproof, energy-saving. Burglar-proof and childproof fittings.
Softline: multifunctional solar control glass unit.
Artline: 6-chamber system 82 mm wide. Suitable for the manufacture of windows and balcony doors. Three sealing circuits. The window sash is hidden behind the frame.
Softline 82: 6-7-chamber system, 82 mm wide. Profile thickness 3 mm with reinforcement.
Swingline: 70 mm wide 5-chamber system with rebate seal.
Proline: 4-chamber profile, 70 mm deep.
Sunline: sliding 3-chamber system 58 mm wide for glazing balconies and loggias with reinforcement.

KBE windows

Brand of a German manufacturer, but in Russia any manufacturer can trade the KBE profile plastic windows... The cost of KBE window systems is lower than that of the first two manufacturers. During production, the Greenline technology is used, which eliminates the impurities of heavy metals in PVC. KBE systems are often installed in the mass development of capital objects. KBE window systems are produced in mounting widths of 58 mm, 70 mm, 76 mm and 88 mm.

Among the units of production there are blocks with air chambers in the amount of 3 to 7 pieces, which can withstand a drop in temperature down to -60 C.

The design of the windows is characterized by curly sashes, lamination, and the presence of aluminum overlays.

SALAMANDER windows

German manufacturer with a representative office in Russia and a manufacturing plant in the Republic of Belarus. Window systems differ in their not small price, but you can be sure that it corresponds to European standards quality. SALAMANDER produces profiles with widths from 60 to 92 mm 3, 4 and 5-chamber systems.

They are distinguished by their design: rounded sashes, the presence of aluminum overlays, more than 30 decors of lamination. The blocks retain their color for a long time thanks to a special surface sealing technology.

Deceuninck windows

The Belgian brand Deceuninck is represented in Russia by only one manufacturer. Deceuninck products are ISO certified in Belgium and Germany. There are conflicting reviews about the window systems of this manufacturer, which cannot indicate a dubious quality. The disadvantages of this brand are the expensive price for outdated modifications.

The product line is represented by highly effective window systems mounting widths 60, 71, 76 and 84 mm with the number of chambers from 3 to 6.

Rating of firms

The brands listed earlier can be ranked by rating, which is based on parameters:

popularity of the company among Russian consumers;

How to choose windows for your home with the best value for money? This will help you quality rating of plastic windows based on user reviews from Otzovik and Irecommend services. In addition, the distribution of seats took into account the popularity of the company, reliability and average cost.

The best plastic windows, rating of companies in 2016

10. PANORAMA

Average window price 2m? - 8500 rubles.

In 2011, the company entered the top twenty best window enterprises in Russia according to the WINDOWS MEDIA portal and the rating of the O.K.N.A. Marketing ”and received the“ Golden Window-2011 ”prize. She is praised for meeting deadlines, skilled staff and cheap prices.

There is negative reviews associated with the formation of condensation and freezing after the installation of windows.

9. SOK

Average price - 12,000 rubles.

Samara company operating on the market since 1999. One of the first in the Russian Federation established own production PVC profile.

Advantages: long warranty (3 years), the window profile is adapted to Russian conditions with a far from gentle climate, factory build quality in accordance with GOST, the windows are warm due to the large width of the profile system (62 mm).

On the downside, users refer to the high price and some note yellowing over time.

8. Deceuninck

Average cost - 10,800 rubles.

The Belgian company offers quality PVC windows at very attractive prices. The most affordable price is the Deceuninck Forward series with three-chamber profile 60 mm thick, which is better in terms of parameters than competitors from the economy segment. The Forward profile will last at least 40 years, the seal - over 20 years.

Disadvantages - at minus 25 degrees, it can freeze up, such a review was left about the Deceuninck Favorit series.

7. Proplex

The average price is 9,000 rubles.

The best economy class windows made using Austrian technologies. The company has been operating in the Russian market for over 10 years, and after all bad players they do not stay in such a competitive niche for long. Advantages: a wide range of colors, shapes and sizes of windows. Proplex offers 7 PVC systems profile with different amounts cameras. Condensation does not appear on the windows even at low temperatures, and at high temperatures it does not "lead".

Disadvantage - the manufacturer saved on fittings, they can become loose.

6. Kaleva

Average price - 10,200 rubles.

Russian window company with representative offices in 80 cities of the Russian Federation. Customers praise her for the quality plastic profile Decco, reliable fittings, fast working times.

However, the service depends on the specific office and dealer, the central office does not accept complaints, so in case of problems you will have to deal with the local installer. Also installers do not always provide full information clients, for example, that you can install a window with internal hinges.

5. MONTBLANC

Average cost - 8000 rubles.

Offers 7 options for PVC profiles. Of these, the Nord is perhaps the best, which is suitable for all weather conditions. There is good feedback about heat and sound insulation.

And the negative aspects are associated with the hardware of not the best quality.

4. SALAMANDER

The average cost is 26,000 rubles.

The most expensive windows in the rating of plastic windows in 2016. Made on German equipment(Haffner, Rotox, Urban), made of high-quality plastic that does not turn yellow over time. The spatulas "merge" with the window into a single whole, which improves appearance... High-quality fittings, three-chamber glass unit, PVC profile with three-sided reinforcement - what else do you need to meet frost and heat?

You have probably already guessed the disadvantage. This is the price.

3. KBE

Sold at a price of about - 7900 rubles.

German brand, whose products appeared on the Russian market in 1995. Since then, she has enjoyed the respect of both window installers and customers. With these windows, the apartment is warm and dry all year round (frost resistance - up to minus 60 degrees), noise from the street does not penetrate, in addition, they are environmentally friendly (do not contain lead).

Disadvantages: Sometimes they need to be washed.

2. REHAU

You can buy on average for - 9700 rubles.

There are various plastic window profiles on the market, but German ones such as REHAU are preferred. They are better than competitors in terms of insulating properties and durability (60 years). The REHAU profiles are available in 60 and 70 mm width, three and five chambers, with white and black sealing rubber. The most economical option is the REHAU BLIZ profile with an assembly width of 60 mm. The reviews praise the quality of the hinges and locks.

Disadvantages: the price for the promoted brand.

1. VEKA

Offered for - 9,700 rubles.

The best plastic windows according to user reviews... Advantages: German quality, attractive appearance (the profile can be laminated, that is, laminated with colored film), good thermal insulation and soundproofing is also excellent. Big choice profile systems: from the budget three-chamber EUROLINE to the six-chamber ALPHALINE.

It is recommended not to settle for Turkish or Chinese fittings, best of all - German. Do not be lazy to ask the installer about the thickness of the reinforcing profile (some save on it), it should be 1.2 mm, at least.

Plastic windows have several key benefits. They are easy to care for, durable, aesthetically pleasing and help to keep warm in winter better without additional papering than wooden ones. In addition, they do not rot and are famous for the best soundproofing qualities. You can sleep peacefully, even if there is a track right outside the window.

The popularity of plastic windows depends on many factors, first of all, they help to save energy resources. And they also create good noise insulation the rooms are, well, quite practical in design. But the installation of such windows requires a responsible approach, therefore, in such a case, you need to contact only trusted companies that provide guarantees for their work. And to choose according to such a criterion as the best company for the installation of plastic windows in Moscow, the following rating of window companies in Moscow in 2017 will help you.

What is the best company for the installation of plastic windows in Moscow

In a city with a population of over one million, like Moscow, there are many such organizations. But our rating is made up of the most trusted firms.

10th place. Stroymaster firm. It has 3 points of sale in Moscow itself, 3 - in the Moscow region. All services are highlighted on the website with a user-friendly interface. It lists all the services that are provided and the price list of price positions.

9th place. "Build windows". The company preferably works with the brands KBF and Rehau. Detailed information can be found on their own website, which discloses all the details of the service.

“Windows of Growth” takes the eighth line. Supports the products of the manufacturers Provedal, Veka, Eurobrus. It has seven points of sale in its state in Moscow.

7th place. Organization "German Windows". According to consumer reviews, this organization should occupy a leading position as best firm for the installation of plastic windows in Moscow. But she won only the seventh position for the reason that there is only one warehouse-office of this company in the city.

6th line belongs to the company "Mobillon Windows". Delivers products of the brands Agrisovgaz, KBF, Novoteks, Provedal, Eurobus. There are up to 12 offices in the city. User reviews are favorable.

5 leaders open the Window Continent, which in its working arsenal includes the following brands: Bowline, KBF, Newtech, Novotex and Provedal. twelve years on the market, has won many positive customer reviews.

The fourth place in such an issue as the rating of companies for the installation of plastic windows in Moscow in 2017 is assigned to the organization "Comfort Windows". The only company that was awarded the Rospotrebnadzor Prize. Has been working for its clients for seventeen years.

In the top three (position 3) is the "Window Factory". The organization works with a very understandable website where people can find all the information they need. The preferred models put forward by the organization are Rehau and KBF.

Second place - "Euro windows". With the exception of the quality of the work performed, he constantly invents various kinds of promotions or discounts for his clients.

The championship goes to a firm whose quality of work is not questioned - Kaleva. A multiple winner of the National Company of the Year award, he has six points of sale in the city. "Starozhil" in the market of such services - for nineteen years the company has been engaged in the window business.

As a result, it should be noted that from the above list, you can choose a company that really performs this kind of task at a high level, and such an organization will really be the best window installation company in Moscow.

Today, a huge number of window products are presented on the market. What plastic windows belong to the category of the highest quality and how do high-end products differ from cheap fakes? When choosing plastic windows, you need to be guided by the main characteristics and reputation of the manufacturer. The cost of a product does not always correspond to its quality, since sellers often unreasonably overcharge the price. Also, do not overpay for those design features that will not be useful to you in your conditions. What you need to know about plastic windows in order to choose a quality product?

The main characteristics of plastic windows

Plastic windows consist of the following elements:

window block and frame (profile) made of PVC;
double-glazed windows (glass chambers);
sealant;
window fittings.

Each component has technical characteristics that depend on performance windows in general. Let us dwell in more detail on what indicators each of the elements should correspond to.

Attention!

Quality PVC windows are manufactured under the control of ISO 9001 and have a corresponding certificate.

Profile

The profile, made of high-quality polyvinyl chloride, is resistant to mechanical, chemical and thermal influences. Its service life is 50 years.

What are the characteristics of a good PVC profile? Before choosing a manufacturer, familiarize yourself with the main characteristics of the product.

Profile width. It all depends on the purchasing power. The wider the profile, the better and warmer it is. One caveat: a wide profile must have more stiffeners, otherwise the strength of the product will suffer.
The number of heat-insulating chambers. For good thermal insulation, it is better to choose a profile with at least 5 chambers. In areas with very low winter temperatures, it is better to consider options where the chambers are filled with an inert gas.
Reinforcement. For rigidity, the PVC profile is reinforced from the inside with steel inserts. The one-piece circuit is more durable, but if the priority is thermal insulation properties, then it is better to put windows with an open circuit - they are warmer.
Country of origin of the profile. Traditionally, German products are considered to be of high quality. But often such windows are produced in Russia using German technology. In this case, the price should also be lower.

How to choose a double-glazed window?

A double-glazed window is chosen in accordance with the requirements required in your conditions. These are the designs of double-glazed windows:

single chamber - two glasses;
two-chamber - three glasses;
three-chamber - four glasses.

An important detail is the thickness of the glass and the distance between the glasses. The larger this value, the better the heat and sound insulating characteristics of the window. Average optimal thickness glass fluctuates in the region of 4-5 mm (the outer one can be thicker than the inner one), and the distance between them is about 10-16 mm with a total thickness of at least 30 mm.

In addition, the cost of the window will be higher if glass with advanced features is installed:

energy saving;
armored;
sun protection;
reinforced;
hardened;
self-cleaning.

The profile color is traditionally white. If you choose poor quality PVC, then it can fade in the sun and acquire a yellowish tint. In addition to white, you can put windows in other colors. In this case, the paint is applied to the surface of the profile or added directly to the plastic mass during the manufacturing process. There is an option like lamination - a painted film is glued to the profile.

What is a seal?

The gasket plays a significant role in thermal insulation and participates in the drainage system, ensuring the tightness of the window. It should go around the perimeter of the flaps and fit snugly on both surfaces. The following materials are used for its production:

rubber;
silicone;
special rubber;
rubber-plastic.

The material should be elastic, soft, but resilient, resistant to external influences... Better to install a seal made of ethylene-propylene-thermopolymer rubber (EPDM).

Choosing accessories

The fittings ensure the opening of the window sashes. Put good fittings- means lengthening the service life of the window as a whole and protecting yourself from unpleasant surprises... The opening mechanism can be simple - rotary, or more complex - swing-out; with slot opening (winter ventilation). High-quality fittings are made from high-strength alloy steel grades. At the request of the client, it is possible to install anti-burglary fittings on the windows, handles with a lock and a lock, hidden anti-drilling pads.

Good fittings are resistant to corrosion, have a smooth ride and an optimal ratio of metal and plastic in the structure.

The leading manufacturers of fittings for plastic windows include the following companies:

Siegenia-Aubi;
Roto;
Maco;
Winkhaus.

Window construction

The cost of PVC windows directly depends on their design. There are rectangular and square windows, you can put profiles in the form of arches and semi-arches, swing and sliding models, with fixed and opening sashes. Big size windows are mounted from several glasses, to give strength, separating them with shpross from aluminum profile... Modern manufacturers are ready to fulfill any whim, of course, for your money. The more custom window you wish to bet, the more opening and rotary mechanisms, the higher the final cost of the product will be.

Manufacturers and prices

Which manufacturers are considered the best? In Russia, about ten companies engaged in the manufacture of PVC windows have proven themselves well. Products of both domestic and foreign production are in demand. All of them occupy their own niche in terms of price-quality ratio, which makes it easy to choose the appropriate option.

Profile VEKA, Naro-Fominsk district, village Gubtsevo. The products have been awarded the German quality mark, and production control is carried out under the auspices of European technologies. TO undoubted merits VEKA windows include stable quality and a wide range of products. The disadvantages are the high cost, which is determined not so much by the quality as by the brand.

Profile REHAU, Gzhel. Today the company is the leader in the Russian sales market in terms of the number of manufactured products. pros REHAU profile: high quality and manufacturer's guarantees, a wide range of products. The disadvantages include the high cost of products.
Profile KBE (KBE), Voskresensk. Another German company engaged in production in Russia. Moreover, along with high quality characteristic of the first two manufacturing firms, KBE profile today has several more low price, which is explained by successful marketing moves.

These manufacturers hold leading positions in the plastic window market. In addition to them, the following firms are in the top 10 with varying degrees of success.

Profile SALAMANDER, Türkheim, Germany. Pros: European quality control, manufacturer's control of dealers, profile design. Cons - the cost of production.
Profile "Mont Blanc", Elektrostal. The advantages include: low cost, large assortment, product quality. Disadvantages - no ISO certification.
Profile Kaleva, Moscow. Pros - excellent design, full production cycle. Cons - no quality management certification.
Profile Proplex, Podolsk. This is a Russian company that has created a full production cycle. Profile advantages: low cost. Disadvantages - outdated designs, lack of international certification.
Profile Deceuninck, Belgium, branch - Protvino.
Profile SOK, Syzran. The company does not have its own profile, but manufactures it at the plant of the Profine concern (KBE). The windows are characterized by traditionally high European quality, but a small selection and unjustifiably overpriced finished products.

In general, the question "which windows are better to install?" there can be no single answer. It all depends on the conditions in which they will be used. For residential premises, for areas with low winter temperatures, more expensive structures are chosen, and in other cases, you can save on the number of chambers and glass units, fittings and glass characteristics. Before delivering windows, they determine the characteristics that they must comply with, and contact leading manufacturers with a good reputation and all relevant documents on quality standards.