Material

Advice! When choosing, you should pay attention to the overall budget of the repair. If the repair is "budget", then the laminate will be more than enough. If the repair is expensive, solid and for many years, then you should think about the parquet board.

Parquet board and laminate in everyday life

In everyday life, these two types of coverage manifest themselves in completely opposite ways.

Parquet board:

Good sound insulation

warm material

It is easy to push through with heels and scratch the varnish by moving furniture

Cold enough

Soundproofing requires a special underlayment

More resistant to external influences

Important! Laminate is not to be underestimated. When sharp and heavy objects fall on the laminate, chips are quite easily formed.

When choosing a flooring, you should first find out the purpose of the room. If this is an office or a walk-through room, a laminate would be more appropriate. For , more suitable parquet board.

Care

Parquet board is a rather capricious material in terms of care. Dislikes temperature fluctuations high humidity. Used for cleaning special means for the care of the parquet board, which will not have much, but still spend money. In addition, from time to time it needs to be opened with varnish or.

Laminate also does not like moisture very much, but this only applies to moisture in large quantities, it’s better not to pour a bowl of hot borsch on it, rather everything will swell at the seams.

But caring for laminate is much easier - a well-wrung rag and warm water are enough.

Durability

Despite the fact that the parquet board is very capricious in its care, its biggest plus is its durability. A good parquet board, the care of which is maintained in accordance with all the rules, will last for more than one or two decades.

Also a big advantage is the fact that it is a natural material.

Info! When the look is frayed and shabby, the parquet board can be varnished or oiled, and it will be like new. Almost like with parquet, except that the number of sanding-sanding is limited by the manufacturer (about 3 times), then you will already erase the top layer.

Laminate in this sense loses a parquet board. IN best case it can last 10-15 years (depending on the class, sometimes more). If necessary, you can change individual boards, but for this you need to disassemble the floor, which is not very convenient option in the living room. It is impossible to restore the entire laminate, only a complete replacement of the floor.

Among the many floor coverings, the leading position is firmly held by coverings made of wood materials. Their range is now so wide that you can choose on the go correct option happens to be difficult. The most famous and sought after are parquet and different kinds parquet boards and boards.

The popularity of wooden floors is evidenced by the wide and varied assortment of parquet, both in terms of the types of wood used and in terms of pattern. The main advantages of wood flooring are the beauty and naturalness of the material. And, above all, this applies to parquet, which can be matched to the interior in any style. Along with the "classic" oak, parquet is also made from lighter wood species: birch, beech and pine. Currently, parquet has become very popular, made not only from coniferous and mixed forests, but also tropical (bamboo and mahogany).

The most common type of this flooring is piece parquet. This, in fact, is the original version of all types of typesetting parquet (panels and boards). It consists of staves (boards of hard wood), the thickness of which in most cases is 22 mm. Each riveting can have grooves around the entire perimeter. Connect such rivets without gaps on the plug-in rails. Another type of rivet is with grooves and spikes on opposite edges. To the base, both those and others are glued with the whole face. After laying, the parquet is sanded and varnished, varnished or waxed.

Solid wood parquet is resistant to wear due to its relatively large thickness. When repairing, it can be easily sanded (cycled).

Panel and mosaic parquet are advanced options block parquet. Such species are small shields or packages assembled from individual narrow boards. Both types are also made of solid wood. They are distinguished by high wear resistance. They are also glued to the base with the whole face, and after laying they are covered with varnish or other protective agent.

Free-lying parquet, which is laid on the base without glue, can also be attributed to this group. If necessary, such a coating is easy to disassemble.

You can lay parquet in various patterns, which turns it into a real work of art. Such a coating is called artistic parquet. This installation allows you to combine different types of wood (oak, maple, ash and others). This parquet is one of the most expensive types of flooring, as its installation is accompanied by lengthy manual work.

In principle, any parquet can be laid on any floor, but there are situations when this type of coating should be used. For example, when installing underfloor heating, you need as thin parquet as possible, which to a lesser extent prevents the spread of heat in the room. Its thickness should not exceed 14 mm. In another case, thick parquet cannot be laid due to low door panels, because otherwise the doors will cling to the floor.

Of course, parquet is considered an expensive pleasure, but it goes well with other floor coverings. Magnificent mixed floor coverings are possible even within the same room. It is advisable to combine the parquet floor in the living room with the carpet. Other combinations are possible, in particular, parquet - stone, parquet - ceramic tile and others.

Along with parquet, massive parquet boards are also widely used. Coatings from such boards are outwardly similar to traditional ones. plank floors, which were laid from long, tightly knit boards, nailed to them. Modern parquet boards are connected into a groove and a comb, and they are hidden to the base.

Massive parquet boards are made both from hardwood (oak, ash, maple, cherry and walnut) and from soft coniferous wood (pine, spruce, fir and larch). Softwood boards are covered with azure, wax, and they can also be stained with stain. On sale there are already finished parquet boards.

Parquet and solid parquet board are not cheap building material. But an alternative still exists - a three-layer, more affordable parquet board. Its base is coniferous wood. In their structure, such coatings resemble plywood and consist of several mutually perpendicular layers, and have a groove and a ridge along the perimeter. This design makes them resistant to changes in humidity and temperature.

When laying parquet three-layer boards are glued together only. On the base (black floor), they lie freely, so that the floor covering consists, as it were, of their separate “floating” shields. Hence the definition - "floating floors" appeared.

With the help of parquet and parquet boards, you can create an atmosphere of warmth and comfort in your room, and outwardly the floor may look different depending on the type of wood and the type of coating itself. So, for example, elegant maple mosaic parquet looks completely different from parquet flooring made from the same material, but both options are spectacular in their own way. In any case, the choice is yours, and no matter what decision you make, with the help of parquet or parquet boards you will give your home a refined and noble look. A source

When planning repairs in an apartment, many people face difficulties associated with the choice of finishing materials. In this article we will try to figure out which is better: or laminate. First you need to study all the pros and cons of the floor coverings of interest to us, as well as them and choose the most suitable option for yourself.

Laminate - parquet board. Comparison.

Material strength

What do you think, in this regard, the answer to this question is unambiguous. Definitely laminate. It is based on high-strength fiberboard, which does not warp, bend, lose shape or sag. Thanks to these indicators, the flooring has a fairly long service life (about ten years), while the panel joints do not diverge, and the material retains its original appearance for a long time. The parquet board in this regard is more whimsical. The tree does not tolerate high loads, it can be scratched or damaged under the influence of heavy objects and even sharp heels. With high humidity, this material may even warp. However, despite a small operation, with careful care, it is able to maintain its attractiveness for about 20 years.

Environmental friendliness

The parquet board consists entirely of wood. Laminate does not contain natural material. It only imitates its coloring and pattern. Therefore, to the question: “Which is better: laminate or parquet board?” - in this regard, it is safe to give priority to the second floor covering.

Exploitation

Laminate is an absolutely unpretentious material. Its top layer is made of a high-strength film that protects the coating from various negative influences. It can be safely washed with an ordinary mop, as it does not absorb water. Laminate is unaffected chemical compounds, so when cleaning you can use almost any detergents. However, if damaged, this material cannot be restored. It can only be replaced separate parts. Consider further which is better: parquet or laminate? natural wood extremely poorly tolerates moisture. Therefore, you can wipe the floor on which the board is only with a damp cloth. Cleaning chemicals and abrasive brushes is also prohibited, because top coat may be damaged. However, due to its structure, this material can be restored quite quickly and easily by sanding and varnishing.

Advantages and disadvantages of parquet

This environmentally friendly finishing material retains heat well and conducts sound poorly. Parquet floors can be sanded up to four times. It has a fairly long service life and does not require antistatic treatment. Laying is carried out quite quickly, the main thing is that the base under it is even. Parquet does not respond well to temperature changes, chemical solutions and high humidity.

It may leave dents from heavy household appliances or furniture.

Disadvantages and advantages and laminate

The material is practical, it is able to withstand significant loads. The covering can be laid absolutely in any rooms. Laminate is easy to install and does not require any special care. However, this material does not isolate extraneous noise and is not repairable.

Now, having familiarized yourself with the main characteristics of the materials, it will be much easier to determine which is better: a parquet board or a laminate.

Working for the second decade in the flooring market, our company has accumulated considerable experience, which allows us to competently respond to main question this article: " massive board or parquet board - which is better?".

Through many years of natural selection, refusing to work with laminate, piece parquet and solid board, we decided to focus exclusively on parquet board, moreover, the only manufacturer - the Swedish company Kahrs.

In this article, we will focus mainly on comparing the products of this particular manufacturer with the products of solid board manufacturers.

Despite the fact that the industry of artificial floor coverings (laminate, vinyl, etc.) does not stand still, and offers the consumer more and more new types of its products, interest in natural wood floors not only does not fade, but, on the contrary, is constantly growing. The explanation for this is very simple - in our urban age, we are moving further and further away from wildlife, and, naturally, we want to have a piece of it in our home.

The visual difference between a massive board and a parquet board is barely noticeable. As you know, a parquet board has three main designs - three-strip, imitating piece parquet, two-strip - an analogue of a piece parquet of a larger format, and, finally, single-strip, imitating solid board floorboards.

In order to consider all the differences between a massive board and a parquet board, we will take the last variety as a basis - a single-strip parquet board, as close as possible in terms of visual perception.

The popularity of floorboards in the form of a massive floorboard in recent decades is due to several factors. On the one hand, more and more citizens of the post-Soviet era can afford the area of ​​​​apartments and country houses disproportionately larger than the area of ​​"Khrushchev" and "Brezhnevka". It is on the big open spaces these floorboards look the most advantageous. On the other hand, modern designs increasingly suggest a combination of elements from different eras. For many of us, the sight of a wide and long floorboard is not an empty phrase, but a nostalgic memory of a rustic experience. And finally, who stepped towards us from the West and received wide use in interior design, minimalism perfectly reveals the visual advantages of single-strip floors.

Everyone who is faced with the choice of a massive board or a parquet board inevitably asks the question, is it possible to visually distinguish one coating from another? Only manufacturers of parquet boards of the high level. In this case, only experienced professionals can find any characteristic differences. And it should be noted that these differences will not be in favor of the array. We will give below the differences between a solid board and a parquet board.

Working for many years in the sector retail sales, we can say with confidence that the main advantage of a massive board, which is seen by private buyers, is the ability to scrape and grind the board a large number of times. Is it really? Is this benefit exaggerated?

In the sketch below, you can see that the massive board is cycled only to the level of the "ridge - groove". And this is much less than half the thickness of the entire board. Of course, this work surface is larger than that of a parquet board. But who said that the second cannot be cycled? work surface a parquet board is quite enough for 2 full-fledged scrapings and 5-6 regrindings. Considering the fact that lacquer coating Kahrs serves at home for about 15-20 years (we dare to say this quite boldly from our own experience), it is easy to calculate how long a parquet board can last. In particular, Kahrs.

As for the floors under natural oil, whether it is a massive board or a parquet board, it is not customary to scrape them at all. The surface is updated by filling all scratches and dents with oil mastic.

Today, the aesthetics of a product often coincides with its practicality. What do we mean? The point is that in last years in design, a clearly defined trend of an aged board has been developed. And, it should be noted from the statistics of our sales, it is only gaining momentum. Any roughness during operation, be it scratches or dents, only organically complements the appearance of the board. Would anyone want to scrape a floor covering that has acquired a special charm of antiquity over the years?

But if we are still not talking about an aged board? Is the scraping issue really relevant, as it seems to almost all inexperienced buyers? For solid wood, yes, but for Kahrs parquet with the revolutionary Woodloc ® interlock, not at all.

On this subject, we will quote ourselves from our other article on thin parquet boards:

But what about when you scratched your floors, made deep dents, but the varnish has not yet rubbed off? After all, you experience quite understandable discomfort at the sight of these damages ... Analyze over what area of ​​the entire floor surface you really have to walk, drop objects and put scratches. It is unlikely that it will be even 50%. Moreover, it is not at all a fact that the entire exploited surface will be damaged. Sometimes it is enough to replace a few damaged boards (and Chersov's Woodloc ® lock allows you to do this quickly and efficiently) in order for the floor to look like new again. If you want to save money at the same time, it is not necessary to buy new boards, take those that were under the sofa or closet and simply swap them with the damaged ones. Many buyers ask how to deal with separate board located, for example, in the center of the room. There is nothing difficult to remove the baseboard and disassemble the entire floor from the wall to this board, and then assemble it with the same ease.

Lock connection Kahrs Woodloc ® 5S

Is it possible to replace individual damaged massive boards with the same ease? The question is probably rhetorical.

For this reason, the question of the longevity of both types of coating remains undisputed. Kahrs parquet board can continue its second and even third life in new premises, which, of course, the array cannot afford.

Based again on our own experience, we can say that when deciding in favor of a massive board, not all buyers are aware of how difficult and expensive the laying of this type of coating is. They are not aware of how much repairs will cost them in case of situations such as a battery break or a flood.

Below is a typical stacking array.

The figure shows that the massive board is attached to the base in the most careful way. Considering that many buyers take flooring to new buildings when the building has not yet given the necessary shrinkage, it is quite logical to assume which flooring will be at greater risk, then which is tightly attached to concrete screed or one that lies freely on the substrate.

In fact, array manufacturers can guarantee the stability of their products only if the humidity in the room is in the range of 50 to 65% throughout the year. What is the humidity in our rooms in reality? Anyone can easily check this by purchasing a hygrometer. You will find that in summer the relative humidity will rise to 90% and above, in winter it will fall below 16%.

Of course, parquet manufacturers also recommend keeping the humidity in the room from 30 to 60%, but this is only at the time of laying. In the process of operation, such stringent requirements are not set. Well, except for very capricious woods, such as beech and maple.

There is one essential detail that we cannot fail to mention, this is the "status" of the array. Yes, yes, many buyers in our country are not always guided by how practical it is, but by how prestigious it is. Well, if this is the last thing that can determine your choice, then we hasten to note that Kahrs parquet is very prestigious. Brand respect cannot be imposed, it is always somewhere in the air. And if you've ever heard of Kahrs, we're sure they were very flattering and respectful remarks.

It hardly makes sense to tell that the parquet board was born much later than the massive board. Of course, an important motive in her invention was the banal desire to save on raw materials. But as time has shown, this was far from its only advantage.

It is a well-known fact in the parquet world that the company Kahrs became the founder of the parquet board in 1941. Gustav Cher, the grandson of the founder of the dynasty, patented the first three-layer parquet board for the first time. How successful the invention was, we can see today on the example of the vast majority of parquet board manufacturers. There were many attempts to create their own design, but only a three-layer parquet board, proposed by Gustav Cher, withstood the test of time.

Many consider the minus of a parquet board to be that, unlike an array, it is somewhat springy underfoot. On this subject, let me quote myself again:

Some of our clients are not satisfied with the springy effect of the floor in floating floorboards. They want their flooring to be as hard as asphalt on the sidewalk. But in vain, because slightly springy floors significantly reduce the load on the spine, and the risk of age-related changes associated with thinning of the intervertebral discs (and, as a result, diseases of the spine) is significantly reduced. As for the unusual sensations when walking on a floating floor, then ... getting used to this is a matter of time. If you still insist on hard floors, there are no obstacles to gluing them to the base. In addition, there are gluing methods that allow you to do without expensive plywood.

For more than seventy years of history of the existence of parquet boards as one of the types of flooring, a huge number of consumers have become convinced of the numerous advantages of parquet boards. One of the main ones, of course, is the stability of the three-layer construction.

The figure below shows how wood tends to behave in any flooring. This is her natural desire. The only difference is that in the array she often succeeds, in a parquet board, extremely rarely, and then from low-quality manufacturers.

In the people, this effect is called the "boat". This is one of the significant disadvantages of a massive board.

The explanation for this is very simple. If a solid board by and large, it's just a skillfully crafted solid piece of wood, then a parquet board is enough complex structure, specially designed to minimize any movement of wood fibers as much as possible.

It works exactly as shown in the picture.

Often, considering all the pros and cons of a parquet board, the main counterargument of our visitors is the price of an array, which is much lower than that of a Kahrs single-strip board. At the same time, most of them are absolutely sure that they are talking about European manufacturers. According to our own estimates, from 80 to 90% of products masquerading as German, Dutch, English, Canadian, etc. are produced in China and countries former USSR. Let's say even more, those inexpensive brands that have become well known to our Russian consumers in recent years have nothing to do with Western countries at all. They were invented by our home-grown businessmen who simply place orders at factories in China and the CIS countries.

As long as Russian legislation does not require sellers to provide reliable information about the origin of their product, our buyers will deal with this kind of falsification.

Our reader should be well aware that if sellers deliberately hide the true origin of a product, then they clearly hide such an important aspect as its environmental safety.

As for truly European brands, they are on the Russian market. Only the price of their products is not at all 2 - 3 tr. behind square meter, and starting from 5 tr. and higher. And this, you know, is already the price of ready-made Kahrs single-strips. What does ready mean? This means that you need to add the price of the substrate to the price of Kahrs (about 100 rubles per square meter). As for the array, this is only the price of the board itself. To it you will have to add the price of all consumables, costing about the same if they are truly high-quality and environmentally friendly. Over the years of work, including with the array, we often had to see the disappointment of customers. They were not at all ready for such expenses, which they had to endure for the finished floor from the array.

In this article, we did not hide from the very beginning that our goal in the matter of “solid board or parquet board” is to convince the reader to take our side. It turned out or not, you be the judge, dear reader. We have told you the comprehensive pros and cons of a massive board and, now, the choice is yours. Let's just say that a considerable number of buyers, whom our managers reoriented from an array to, were very grateful to us for this.

In order to make sure undeniable merits and for more information, we invite you to visit any of the five showrooms of Leader-Parquet.