First you need to cut a lot of sticks that are square in cross section on a circular saw. Approximately 16mm thick. If there are six crowns in this house, then 24 sticks are needed. Our house is square in plan, which means the sticks are needed the same length. The length of the sticks must be chosen according to the length of the future walls of the house. Plus 2 inches.

Then you need to give the sticks a cylindrical shape. This is usually done on a special machine. We don’t have it, so we use a regular wood lathe.

The front and rear centers of the machine leave quite noticeable indentations when processing on a stick. Therefore, the ends of the sticks, where the recesses remained, must be cut off. A centimeter on one side and a centimeter on the other. And so you need to process all 24 sticks.
In this picture, the depressions are clearly visible.

Then two indentations are cut in each stick.

Then we smear these recesses with glue "Joiner" (quick-drying PVA). If necessary, then smear the entire length of the stick.

And we glue. Crown after crown.

Until we collect the whole log house. The “joiner” will need about 15 minutes to dry. Therefore, all this time the entire log house must be pressed from above. You can just use your hands. When everything is glued together, it should look like this.

Now we mark the slots for the door and windows.

And saw through with a jigsaw.

Before cutting out the windows, we drill a hole in the wall of the house. We will then insert a file into it. Sawing windows and doorways will just show us whether we glued the sticks tightly or not.

Where necessary, cut with a knife.

As a result, we should get this.

Then we grind and trim the ends of the logs on a rotating plywood wheel with sandpaper.

We paint the house strong mortar manganese. Can only be outside.

When the manganese dries, wipe the house with sandpaper. So we have a stretch in color. Some places are highlighted, others remain dark.

The result should be like this. Here we have blanks for two houses at once.

Then we cut out two triangular pediments from fiberboard. The roof angle on most houses is 90 degrees. In the blank of the pediment, you need to make two semicircular cutouts for the sticks. They are made with a semicircular chisel.

Then birch bark is glued onto these blanks. And already an embossing is made on it, depicting boards and the structure of a tree. Embossing can be done with a very large needle. Then the embossed surface is painted with manganese, and the excess dye is erased with the 646th solvent. You need to rub hard. Firmly pressing a cloth moistened with solvent to the birch bark. It should turn out like this.

Then windows are cut out of birch bark according to the size of the openings. Double layers are better. Then they need to be glued together and glued into the openings.

But the windows and gables are already glued into place.

Then we make the roof. The roof is made of birch bark on a cardboard base. On the birch bark, rows of scales are cut with two incisors. And thick cardboard is first dyed with manganese, then with a non-aqueous stain for shine.

02/19/2018 6,050 0 Anya

skillful hands

The use of natural materials in the decor of the room always evokes a romantic mood. With this decoration, you can surprise not only your guests, but also create crafts from tree branches with your own hands for a gift to friends and relatives. Moreover, with minimal cost, you will get the maximum pleasure from the process of creation original compositions, and from an interesting result.

Content:

Technical features

Beautiful products can only be obtained if you give Special attention the quality of the material. In the midst of summer season a very large amount of bark of branches is eaten up by various insects, so they need to be harvested in the first month of spring or at the end of October.

After the branches are collected, you need to immediately start drying them in order to avoid deformation of the rod and bark within a month. This will take approximately 7-14 days, provided that it is kept room temperature. An ordinary battery will help to speed up the process for several days, if you spread branches on it.

Processing can be continued by opening the material with varnish or paint of the desired shade. There is a special varnish for wood, but if you can't find one, you can always use a colorless nail polish, which is relatively easy to get at retail outlets.

Master class: 10 examples of creativity

Just taking branches and immediately creating a masterpiece out of them that fits perfectly into the interior is quite difficult. Therefore, we offer several master classes that will help you analyze in detail the stages of creating a particular craft.

Candlestick from tree branches

Before you start, prepare:

• dried branches;
• low glass;
• glue gun;
• a candle;
• secateurs.

Let's get started:

1. Look for suitable, not very thick branches, wash them and dry them properly, and then give them the same length with pruners.

2. Place a glass in front of you, apply glue to each branch and carefully lean them against the glass, holding them with your hands for about a minute. Glue each subsequent branch close to the previous one.

3. Now it's the turn of the candle. It should not be higher than a glass. The candle must be inserted in the middle and the product is ready.

This is not the only candle option using twigs. Next option much easier. Only after drying, it is better to immediately paint the branches in a golden or bronze color, and only then hot glue gun fit them around a thick candle.

Photo frame

Such the right thing in any family, like a photo frame, you can make it from dry twigs.

You will need:

• many branches;
• wooden rectangle for the base;
• glue gun;
• various decorative elements to choose from.

How to do?

1. Glue the pre-dried branches with a glue gun to a wooden base. First fill in the parallel sides, then the other two parallel ones, keeping the shape of the frame. The branches should be glued close together;

2. Take all the elements that you have prepared for decoration (we chose moss) and stick it in any corner of the frame. You can distribute in other places at your discretion. Now insert the photo into such an unusual frame.

Advice! Children can also be involved in the preparation and creation of such crafts by giving them very simple tasks - to collect twigs, spread with glue and apply.

You can make a photo frame with the following arrangement of branches:

And someone will like the following natural frame:

Pencil stand

This one is very useful item will never be superfluous, both on the table in the office and on the children's work table.

Prepare:

• a small stump (you can take a saw cut of a tree), whose diameter should be no more than 16 cm and a thickness of 8-9 cm;
• drill with a drill about 9 mm. to make a small number of cracks in the stump;
• sandpaper.

Progress:

1. Peel the stump from the bark;

2. Make a few slots with a drill (from 10 to 25). Step back from each half a centimeter to make the next;

3. Fine-grained sandpaper process all wooden frame, achieving smoothness and removing protruding places;

4. Insert stationery or art brushes into the finished stand.

If you like unusual shapes and want to be original, then a tree frame and, accordingly, the stand may look like this:

Clothes rack

A hand-made decoration for the hallway will cause more than one enthusiastic compliment, and you yourself will delight your eye every day with such original element home interior.

When getting started, do not forget to prepare the following materials:

• thick branches with the same processes;
• self-tapping screws;
• drill;
• saw;
• board for the base, pre-prepared (can be varnished).

Remember the following steps:

1. Prepare the hooks: cut the trunk of the branch into 2 parts, the length of which should be about 30-40 cm. Using a saw, form a part that looks like a hook. File a knot from the branch being processed approximately 5-10 cm back, and on half of the branch and knot make a cut on the edge;

2. Attach the resulting hook design with a self-tapping screw to the base of the hanger. If you are not going to use a hanger for heavy things, then you can use special wood glue instead of self-tapping screws;

Paint the hook branches with paint or varnish.

Flowerpot

To tidy up your flower pots or flowerpots, achieving a uniform style, you also need to use twigs and send your inspiration to create a product.

To make everything work out as it should, put in the workplace:

• twigs, dried and ready for use;
• saw;
• jute threads;
• piece of burlap.

Let's get started:

1. Using a saw, make all branches the same length.

2. Put on flower pot or flowerpot a piece of burlap and glue its edges.

3. Carefully tie the branches with a thin, strong thread in 2 places: closer to the top and closer to the bottom.

4. Cover the target object with tied branches. To keep everything and have aesthetic appearance, use a ribbon or thread with a bow.

Hanging table

Hanging things in the house speak of the originality of the owners of the apartment.

Moreover, you can place it anywhere - even near the bed and use it as a bedside table.

What you need to prepare for manufacturing:

• grinding machine;
• board;
• drill;
• glue gun;
• screw;
• S-shaped hook;
• polyurethane spray;
• felt cut;
• thick rope.

Progress:

1. When you have prepared the board, sand it with a special machine.

2. Drill 3-4 holes at the same distance from each other (one of them should be closer to the wall) so that you can stretch the rope through them.

3. Spray the entire piece of wood with polyurethane spray a few times.

4. From the side of the wall, glue the felt piece with a hot glue gun.

5. Pull the rope through the holes and tie knots at the bottom as tightly as possible so that at one awkward moment the whole structure does not end up on the floor.

6. Make a hole in the ceiling with a drill and fit the ring on the screw there. Attach an S-shaped hook to the ring.

7. Collect all the ends of the ropes at the top and make one very strong loop with a knot from them, which you place on the hook.

decorative tree

The tree in the house always looks beautiful and unbroken. To update your interior with such a wonderful product, prepare:

• a few dry branches;
• pebbles (preferably from the sea coast);
• Styrofoam;
• decorative moss;
• glue gun;
• capacity unusual shape.

Let's get started:

1. Pour the prepared stones into a container, almost to the middle.

2. Cut the foam to the shape of a pot and place it on top of the stones.

3. Make a hole in the foam and insert the pre-selected twig there as accurately and evenly as possible.

4. Top with pebbles again for stability and cover with moss.

5. To decorate the tree, glue the decorative flowers in any order with a glue gun.

Advice! The branch before being placed in the container can be painted in gold, bronze or any other color.

Wreath on the door of twigs

This wreath can be hung on New Year holidays, or you can just decorate the entrance at any time of the year.

You will need a minimum of material:

• twigs;
• copper wire.

Progress:

1. Wind the wire in the form of a circle and build a hook out of it.

2. Gather the twigs into small bundles, connecting with wire at the bottom.

3. Wind bundles of branches around the copper blank until the entire surface is covered.

4. Ready product can be decorated with mountain ash, bows and ribbons, etc.

Decoration of a mirror with cut branches

A boring mirror can be updated with small wooden cuts.

Before you start, prepare everything you need:

• thick and thin branches;
• saw;
• glue gun.

Let's get started:

1. Use a saw to make cuts from the branches. They must match each other in thickness.

This idea is very simple, anyone can do it. No need to spend money on materials, everything you need is right under your feet! DIY crafts from tree branches will be a wonderful gift for friends and family.

Craft from branches with your own hands

Wooden decor will perfectly fit into any interior. Use all your strength and inspiration, the result is amazing! See instructions on how to create a unique masterpiece!

You will need

• 10-20 branches of the same thickness
• hot glue gun
• deep dish, mold tray
• tweezers

Manufacturing

See more ideas on how to successfully use rods in decor.

It is easy to make miniature vases from branches. Use ribbons and natural materials to improve them.

Original candlesticks perfectly emphasize the romantic atmosphere.

Decorative wreaths are beautiful in any design. Thematic or New Year's, they set the mood for the upcoming holiday.

On the eve of the New Year please your loved ones. It looks magical in every apartment!

I hope the article was useful for you. Tell your friends about it, many will want to do it do-it-yourself autumn crafts from branches.

Using natural objects, in this case ordinary branches, will help create a unique atmosphere in your home. Eco-decor from branches is far from a new idea, but extremely interesting, especially for handmade lovers. We have selected ideas for you that will inspire you to make eco-friendly home decor.

Walking through the forest, you can find a lot of interesting, intricate snags, large and small dry branches and then use them to decorate your home. You can also buy them in a specialized store. Found dry branches must be cleaned and applied with a layer of a product that will protect your product from wood bugs and larvae. Prepared branches can be stained, varnished to preserve their original appearance.

What style of interior use dry branches

You can decorate your home with dry branches in any interior style. The most important thing is that the decor is combined with the main idea of ​​\u200b\u200bthe style and does not seem out of place. No need to overload the room large quantity branches. Remember that everything should be in moderation.

When we use tree branches for decoration in our home, we seem to become closer to nature, which gives originality and exclusivity to the environment.

Eco-decor elements from tree branches

Compositions from tree branches can be quite diverse. It all depends on your imagination. For example, you can decorate vases, candles, old flower pots.

Tie a mirror with woven branches, which will betray some originality to it.

You can also make decor from branches for photo frames. It will be a nice gift not only for yourself, but also for your loved ones. Very often we can see front door, decorated with a wreath of dry branches. This is an interesting decor item for your home.

You can also decorate with dry branches floor vase, which will give its particle of originality. This decor is the easiest to create, you just need to put the prepared branches in a vase.

Small branches of trees can be placed in vases, which can then be placed on a table or shelves.

If you attach paper, plastic or textile fruits to the branches, you can admire the fruit-bearing tree without leaving your room.

A picture made of dry branches will look very unusual and elegant.

You can use the decorative branch as a jewelry holder.

So that the wall does not look empty, it can be easily decorated using ordinary branches. And with the addition of lighting, it will look more impressive.

You can decorate decorative branches: pebbles, shells of various sizes. And in new year's eve instead of a Christmas tree, you can use a dry branch and hang it with holiday attributes.

Dry branches can also be used in the interior of a children's room. A branch above the bed, decorated with various toys, bows will give this room a kind of fabulousness.

V kitchen interior branches will also look very interesting. Dry twigs of the same length will help to perfectly hide an unsightly battery. You can make hot coasters from ordinary branches. And how interesting the fridge magnets will look, created from small dry twigs and tied with a ribbon.

Dry branches can also be used to decorate the bathroom. It can be a paper holder made from a dry knot, a hanger or a hook for towels and other small things.

Decorative branches - not only beautiful, but also convenient

Dry tree branches are used not only as an element of decor, but also as a functional element. necessary element in the interior. They can be used as an addition to furniture.

From dry branches can be made coffee table, chair, comfortable and roomy bookshelves, floor lamps, complementing them with decorative materials.

Railings made of simple dry branches will look very interesting in the interior.

If you have a small area of ​​\u200b\u200bthe room and you would like to visually separate the zones, it is interesting design move will use dry branches as partitions. Such a division into zones will look stylish.

In the interior of the bedroom, you can use a screen of branches.

Hangers that are made from dry branches look very creative.

Branch lighting fixtures

Chandeliers or lamps that are created using wooden branches will give your room a fabulous atmosphere.

You can make your own lamp. But when creating your masterpiece, remember safety precautions.

You can make such a lamp with your own hands. You just need to determine what form you want to give it. Will it be a snowflake lamp, a sconce made of twigs, or just a lamp in the shape of a ball.

Consider the step-by-step process of creating a spherical wooden chandelier:

1. You can buy decorative branches in a specialized store, or you can find them in the park. Choose only twigs at least 9 cm long and unusual in shape. You will also need a balloon, hot melt adhesive, cling film, secateurs, a light bulb and a lampshade.
2. Wrap the ball with cling film. Then glue it with prepared branches. When the glue dries, pierce the bead and remove it.
3. Insert the base with a light bulb inside the chandelier and fix it. wooden lamp in the form of a ball is ready.

In order to make a lamp from ordinary driftwood, you will need:

• dry branch, diameter from 3.5 cm;
• board;
• cartridges and lamps;
• screws and nails;
• engraver or knife, soldering iron, saw, pliers and screwdriver;

Consider step by step the creation of a chandelier.

The branch must be cleaned of bark and a groove made with an engraver or a wire knife. With a drill in the board we make holes for the screw and wire.

Branches with a diameter of at least 3.5 cm are cut into pieces 5 cm long. The middle must be drilled and inserted inside the cartridges.

We connect one end of the wire to the “wooden” cartridge, and the other to the hole on the large branch. We do this with all the cartridges. We lay the wire along the groove and solder all the wires together. The lamp is ready.

Many of our compatriots provide photos of romantic European interiors with the phrase: “You can’t forbid living beautifully.” This is true if you have a good mood, imagination and a desire to make your home cozy with your own hands. Literally everything is suitable for these purposes, for example, dry branches in a vase or in the form of a frame, which are without limitation in the garden. Our main task is to show readers how to make an attractive decor from branches and decorate the interior beautifully without any costs.
The branches are suitable for everything - the manufacture of furniture, decorations, panels. Eco-design has been in the TOP of design preferences for many years, inheriting the traditions of the exterior rustic style. This is not at all surprising, natural decorative materials- always perfect, and also great for creativity.
We recommend making from natural materials:

• wall panels;
• paintings;
• furniture;
• small trinkets;
• holiday decorations;
• lamps.

Wall panels

Eco-decor can be taken as the basis of a design project, it will look great. Note that the level of stylistic design depends only on talent, imagination and perseverance, since any products made from dry branches require careful implementation. Almost everything can be made from snags, tree trimmings, various large dry branches, thin tree trunks - furniture, lamps, decor and, of course, wall panels.

The theme of the autumn forest was repeatedly revealed by many artists, for example, Klimt. Trees with fallen leaves create a calming atmosphere that promotes relaxation. Meanwhile, such a decor of a hallway, living room or bedroom made of dry branches resembling a forest can be decorated with bright elements at any convenient moment, they will thematically enliven the interior and bring natural beauty into it.

Festive home decor - wreaths

Dry branches in the interior will help decorate rooms for Christmas, Valentine's Day and Easter. They can be used to decorate your home. To create an original candlestick on festive table for the house, take a strong branch that will stand steadily on horizontal surface, paint it with metallic paint. Then apply glitter with varnish, fix the candlesticks with self-tapping screws. For these purposes, any decorative candles are suitable.

Furniture and lamps

Branches in the interior can find their place as accessories original furniture, legs, stands, holders or frames to the mirror. It is better not to talk about furniture options, but to show interesting solutions designed by designers in different countries. Believe me, such interior items for the home will never look inappropriate, as they are real designer furniture.

Paintings from branches and small decor

An interesting solution that will allow you to avoid wasting money on photo wallpapers are paintings from branches. For example, birch branches in the interior look very elegant and in Russian. With the help of willow trimmings, you can create light "laced" compositions. To do this, it is enough to make a frame from a wooden plank and attach branches selected to the size using self-tapping screws or a stapler. Separate branches can be assembled into various shapes, create a modern graphic installation, decorating paintings with affordable finishing materials.

Christmas tree from branches