Types of structural plaster for internal works: advantages, disadvantages, photos. How does structural plaster applied

You are tired of standard general user finishing coatings different surfaces? Want your accommodation to look important, stylish and modern? Then the structural plaster will come to the rescue.

This coating can mimic natural stone (torn, marble, sandstone), brick masonry, mahogany, dear fabric. We will tell you in this article about the varieties of structural plaster, ways to prepare and apply in this article.

Types of coatings with severe relief

Structural plaster - inhomogeneous composition of grainy, containing various fillers ( quartz sand, mica, stone crumb, wood fibers). It is used to give the surface of the decorative species.

Thanks various technology structural coating, it looks harmonious in the interior of any room

Plastering based on cement-lime composition, synthetic components, silicates are manufactured. The form of a structural coating is a white plastic mass. The mixture is superimposed on the wall by a layer of a certain thickness, and then processed by special tools until the formation of the required pattern is formed.

Examples of wall relief - solution application of solution

Structural plaster for facades - moisture and weather-resistant coating, resistant to abrasion, designed specifically for decorating external walls Buildings, base. It is manufactured on the basis of dispersion, silicone resins, silicates, or mineral additives. The coating can be applied to brick, aerated concrete, concrete, plaster with a brush, spatula, roller. Its varieties - mineral plaster, "Coroed", "Crocodile", "Barashki".

On a note: High-quality structural plaster for external work retains its decorative and protective properties up to 10 years.

Stucco Decorative structural for registration of the building outside does not fade, and the color of the coating can be replaced with time

Structural plaster for internal work - thin layer coating that is applied to bricks, concrete, wooden walls, Plasterboard. It allows the walls to "breathe", is cleaned with cleaning and washing, unpretentiously in care.

Modern decorative mixtures are able to imitate almost any coatings, ranging from wood crust, Snake skin, silk canvas, torn stone, marble (Venetian). Read more about how the silk plaster is applied - instruction:

Making a solution with your own hands

A mixture that can decorate walls, ceiling, sold in finished videoOr you can cook it my own. How is the structural plaster?

At home, you can cook the mixture for texture finishes from simple storage materials. For this you need:

6 kg dry putty;
200 g glue;
2 l of water.

First mix putty and water. Then glue is poured into the solution, stirred and applied to the surface. The pronounced surface texture will be obtained due to the addition of a certain fraction in a mixture. A grain of 0.3 mm is used to simulate sandstone, the pattern of wild stone is recreated using a 1.5 mm fraction filler. For plaster, the cores are used by grains of 2 mm, and to create the effect of wood bark - 3 mm.

Important: The ratio of filler to the astringent substance (gypsum, glue) - 3: 1.

Easy way to create relief using structural roller For decorative plaster

Methods for creating decorative relief

The method of applying structural plaster frightened on its type and desired effect. To work will be needed by the following devices:

reservoir for breeding the mixture;
halfury, Kelma, scraper;
spatulas different species;
mixer.

For your information: Regardless of the type of plaster applied, the surface under it should be pre-cleaned, align and process to.

Instructions on how "Coroed" is applied, structural plaster with their own hands - Video:

Sprinkle way

Plastering is carried out using a broom and a stick. In one hand hold a broom, and in the other - stick. The tip of the broom is dipped into the solution, and then hit them by stick in such a way that the splashes fall on the wall. Sprints are performed in 2 layers.

An example of how to make the structure of "fur coat" by the usual broom

Creating a relief of Caelma

First, a solid base layer of plaster on the entire surface is applied. When it dries, proceed to the overlapping of the second layer, immediately forming on patterns, conducting a celma in different directions. An example of how to apply structural plaster on video:

Creating a structure with a brush

On the freshly mounted layer of plaster spend a metal brush, forming thin chaotic lines. When the coating is dry, small particles are removed from it with a soft tassel.

On a note: this structure In a different way, called "Nachi".

Simple technology creation creation "Nachi" - structural plaster with your own hands, photo

Punching with roller

Another way to obtain an interesting structure is the use of a relief roller. It can be sold with a finished inflicted pattern, or the texture can be created independently.

Idea: If it is wrapped with thick threads, when applied, the plaster will imitate the stems of grass.

Structural Plaster Technology Relief "Grass" using roller:

Methods for applying relief set. Want to know more how the structural plaster is applied? Video lessons will help you with this:

Structural plaster belongs to the category of finish coatings. And if the coating plaster is used only in order to align the surface and prepare it to subsequent processing, then the structural plaster in addition to this itself is finishcoat.

To form the necessary surface texture to the conventional plaster mortar (based on lime, cement or acrylic), a large grain filler is introduced. The size of the grain is selected depending on what should mimic the plastered surface. For example, for plaster in the style of a coroede, it is recommended to use a filler with a grain size of about 2 mm.

If the grain size does not exceed 1.5 mm, then the plastered surface will resemble the raw stone, and the sandstone imitation is achieved during the grains of no more than 0.3 mm.

Strong and weaknesses of structural plaster

Structural plaster has a number of indisputable advantages:

Easy application. The mixture is characterized by high plasticity, due to which it is perfectly applied to any surface.
Thanks to the texture, it can hide small defects Surfaces.
High strength. The hardened layer of structural plaster perfectly resists the chips, scratches and other mechanical stress. This provides a long service life of such a coating.
May act as a warming layer.
Does not change its operational performance in a wide range of temperatures (from -50 ° C to + 75 ° C).
Due to the ability to vary the color and texture of the surface in a wide range, structural plaster without problems will fit into any interior.
Supports the microclimate in the room (structural plaster breathes due to micropores). At the same time, it absolutely does not absorb moisture, so it is very easy to clean from pollution.
The color of the plaster can be changed at any time, simply painting the solidified plaster.
Enough low price.

Structural plaster is practically devastable. It can be noted that it is very poorly flushed, so before performing work, it should be carefully wasolate all surfaces that are not subject to plastering.

What type of structural plaster to choose

Structural plasters are sold already in the finished form, so the choice of a particular mixture is determined by the result that must be achieved and the conditions in which work will be performed. If the work is carried out in the room, then preference should be given a plaster mixture based on water. This solution will not affect the well-being of residents. Solvent-based solutions are recommended for plastering outdoor walls or non-residential, well-ventilated premises.

As for the size of the aggregate, it must be remembered that the fine-grained plaster after applying on the wall looks almost smooth, it can be used if it is then planned to apply patterns using a roller. Mixtures with coarse aggregate form beautiful pattern from chaotic groove (depending on the method of application).

The basic color of all structural plasters is white. The required color is attached to either the introduction of a dye into the solution, or by staining the dry layer of plaster.

In addition, there are mixtures based on the mineral base (cement, lime is used as a binder, on the basis of synthetic laters and using potassium silicate. Latex plasters are forbidden to apply on the surface treated with dispersion or water-free primer. For coatings containing sand, it is better to use mineral structural plaster.

Tools for applying structural plaster

To perform work, you will need such tools like:

A hammer.
Bucket in order to apply plaster.
Plumb.
Level.
Spatulas.
Master OK.
Rule.
Roller with pattern, brushes to give the surface texture layer plaster.
With a large front of work, it is recommended to use a gun to apply plaster.

Technology application of structural plaster with their own hands

The quality of the preparation of the base under structural plaster depends on its strength and durability. Therefore, on preparatory Stage It is necessary to thoroughly clean the surface of the walls from dirt, dust may have to remove part of a weakened material, and large potholes should be sealing. At the same time, it is not necessary to strive for a perfectly smooth surface, the structural plaster will allow to disguise small defects.

Before directly applying plaster, the prepared surface is covered by primer deep penetration. The main purpose of the primer is to strengthen the microcracks and ensuring the optimal clutch of the layer layer with the surface of the wall.

To prepare a solution of structural plaster with their own hands, it is necessary to simply pour with water ready to dry the mixture in accordance with the requirements of the manufacturer and mix it manually either using a mixer. Before applying the solution on the wall, it should be arranged for about 10 minutes, after which the mixture must be reused.

The plaster is applied in layer, the first layer - spray, after its application you need to quickly align the surface, corners. After that, it is necessary to wait for the layer setting. At the second stage, the cross-hard layer of plaster is applied. After applying and alignment, it is necessary to wait for the solution to begin to capture and sweep the plaster. At the last stage, the wizard fantasy is practically not limited to anything, and it can create any surface with a conventional spatula, brush or texture spatula.

If it is not planned to apply structural plaster on the ceiling, then work is recommended to start with the top of the walls.

Fully structural plaster will clarify for 1 - 2 days. After that, the ridges must be sanded, and dust and dirt from the surface of the plaster remove with a damp cloth or sponge.

Properly applied structural plaster with a well-selected color scheme can rightly be considered a real work of art. Combining all the advantages of ordinary plaster (such as strength, durability, environmental friendliness, etc.) they perfectly fit into the existing interior and themselves are finishing premium-level coating.

Structural plaster has a number of features and advantages over other building materialsused to finish interior. It is applied on any surface: from concrete and brick, drywall and wood, etc.

The surface on which there is a facing is very resistant to mechanical impact damage, such as: strikes, cracks, scratches, etc. In addition, such plasters also various temperature differences are able to withstand, from minus fifty, up to seventy five degrees! But this plays an important role on what areas they can be applied.

Due to the fact that the decorative structural plaster there are micropores, the most favorable microclimate is ensured indoors.

The structural types of plasters are high pile, which is why there can be played on the ceilings and walls any, even the most complex texture. And if done redecorating iStokexpert.ru/remont/ Indoor, it can be easily repainted with a different shade or color.

Behind such coatings are easy and care. After all, they do not let moisture. And this means that you can safely do wet cleaningapplying special means from household chemicals.

Applying structural plaster

First you need to prepare the surface, diving from them, dust, etc. Next, eliminate flaws and defects, it concerns cracks or chosel. Of course, if there will be very low-taste irregularities on the wall, it is not scary. After all, structural plaster is capable of hide them. Therefore, it is quite easy and just with your own hands to carry out all the work to eliminate defects.

After that, the surface must be rebounded. And to facing material The most effectively cling to the base, you need to take the primer of special, deep penetration. If we talk about the walls of the tree, then for it the primer must be mineral.

In order for the work to be made more reliably, after complete drying of the soil is applied further than another layer of primer paint. With the help of it, the joints on which leaf bases (from GCL, DSP, etc.) are connected together, will be even more fortified.

After the work described above, you should prepare plastering mix. This is done strictly according to the instructions indicated on the packaging of the material.

You need to mix a dry mixture with water with a special building MixerOr a drill on which a special nozzle is dressed. After this mixing, leave the mixture for ten minutes, then hindle again.

To apply structural plaster you need to start with the upper parts of the walls, if the ceiling coating is not provided by this material. If we apply material to the outer parts of the corners, the plaster must be applied on both parts of each angle, then complete the corner spatula.

The first layer of plaster should be applied by a spraying way. It needs to be dissolved and arranged eaves, angles. After this layer grabbies, apply the second layer, immediately leveling it.

When this layer is already a little seized, make rollers to various reliefs and any texture. But the toothed spatula can be smoothed out the surface, inflicting pictures of geometric shapes or just circular. To do this, you can use sponges and brushes.

The desired texture is also made if you choose a material with a certain content. For example, from popular types of structural plasters, a core, grain in the composition of two millimeters, and here to make the effect of the tree of the tree, you need to take such a material in which the filler is three millimeters. Accordingly, your interior will be the most unique!

When the picture was drawd on the surface with the plaster, let it stand for eight hours, well, so that it completely froze and removed, it will take two days. After that, you need to sand crests and remove dust with a wet sponge.

As a rule, textured types of plasters - on sale white color. To give other colors, a separately acquired dye is added to it. It is advisable to buy it the same firm as the plaster.

So that you are not disappointed with the color scheme, try applying the material to a very small area.

In addition, you can paint the surface after it hardens. With the help of a rubber sponge, you can create smooth transitions. And the dry surfaces are covered with wax. See on the selection of photos of structural plaster, how diverse ways of interior designs by this material are!

Structural plaster - 25 photos

Today during repair often masters stop their choice on decorative structural plaster. Due to its special composition, it protects the surface, will allow air to circulate, and also gives a special, unique, original relief.

Meaning and features

In addition, depending on the manufacturer and variety of material, wood fibers, mica and quartz can enter.

They are used during the finishing of the room. The basis of the coating is a fraction of stone chips.

If you use the smallest fraction, the surface will be smooth, but still, small textured elements you will see. If the plaster is applied, which contains a slight granulation, finish finish will have a relief coating.

Optimally carrying out internal work with medium granulated fractions. They fall exactly on the walls, and create an incredible pattern.

Coloring colors, as a rule, white, but not many consumers it suits it. The desired shade can be made personally. For this, professional pigment is sold in stores, it is selected by color gamma premises.

A small amount is enough to make the color brighter, the shade is adjustable as the pigment is added to the mixture.

Structural plaster can be distinguished from other analogs, thanks:

source material as well as color;
viscosity;
obedience mixture;
the stability of the finishing coating;
bowl thickness;
frozen speed.

Most often, future repairmen acquire already ready to apply a mixture that sold in a plastic container has already been packaged.

Mineral components or synthetic materials may include mineral components.

Depending on the components that are part of the components, the mixture will perform different functions. For example, the more mineral substances there, the easier it will be the easiest walls of "drawing".

They quickly miss steam, but they are often still additionally treated with paint or other coating to improve technical indicators.

Also at present, a large variety of dry mixtures are presented on the market, packaged in paper bags.

It is enough to dissolve with water.

If you pay attention to polymer plaster with special components and purchase it, then you will soon realize how much it is resistant to exposure high humidity , Promotes the death of fungi and stops the formation of mold.

Color abundance can be obtained in several ways:

during production;
before applying;
after you have fallen.

The first option is the most convenient to use, because it does not require a special careful preparation As for the latter, it can be purchased, as a rule, in the form of a conventional white paste, which will be painted in parallel after creating structures and full frost.

For details on the structural plaster, watch the video:

pros

The structural plaster composition is characterized by a number of benefits that successfully allocate them from a long list of other types of plasters. Below are some of the main advantages:

universality. Used not only for internal, but also an external finish;
ease. Ideally contact and go to any surface. It has good adhesion with cement, brick, concrete, wood and other surfaces that require processing;

masking of flaws and irregularities. A perfectly smooth coating on any wall is created;
resistance to mechanical damage;
ease of cleaning the surface from any contamination. At the same time, the plaster does not suffer at all. Cleaning is carried out cleaning and washing agentsnon-solvents;

completeness to temperature drops. Ideally transfers oscillations within +38 and -55 ° C;
the material is very plastic. Due to this, it is very simple to apply it on the surface, it creates an original relief;
coating strength. Air circulation occurs in the walls, they seem to be "breathing", which will prevent the formation of fungus;
ideal attitude between price and quality.

Minuses

Despite the fact that so many advantages, one minus is still there: a very high price. Not every resident of the country can afford to hold such an internal finish.

Views

Despite its versatility, structural plaster can also be divided into different types. Most often they differ from each other with the composition of the main ingredients.. The leading positions on the market occupy the following types.

It is used during internal work.

It is the main ingredient of cement, so you can get a mixture in a dry form, then it must be dissolved with water immediately before applying.

The only insignificant inconvenience during work with these components is the need to carry out surface staining paint and varnish materialWhat you chose. It is rational to apply on any surface: concrete, wooden, brick, metallic, it is not exposed to water.

The composition includes separate elementsthat prevent famous blur, Due to this, the treated surfaces can be purified by water. This composition is an ideal heat insulator, besides, it is consumed quite economically.

It is used for outdoor and interior decoration.

Its use as simple as possible, the material has a unique plugness with a mineral surface regardless of its type.

The plaster can be treated with any wall, it does not affect the temperature and moisture drops, but may be deformed and losing their initial characteristics during the exposure to sunlight. It is inferior to the mineral and silicate analogue.

Plaster is a universal finish material that can be used for external and internal work.

It is characterized by excellent elasticity and adhesion. Well complements almost all types of surface.

In addition, you will never notice dirt and dust on it, they simply do not accumulate there, and those that still fell, are easily cleaned using a wet cloth. Characterized by a huge color variety. This is precisely the choice of customers, many colors are also divided into tones.

The plaster may include water or solvent.

It is worth looking at what you want to get as a result. If you do not know how your room will look like, after applying structural plaster, be sure to look for the appropriate photos on the Internet or in special magazines.

Among the entire diversity of finishing materials for construction in the domestic market, the most popular is considered to put the Rotband's putty from the famous company Knauf. Plaster - that's high quality and reliability.

The wall decoration, which is carried out outside, plays a huge role and is considered one of the main stages of work. Turning to familiarize yourself with the wall facade panels.

The screed is a mandatory component of the design of any floor, which is located under outdoor coating, and provides durability and persistence finishing. You can find out how to make a light screed.

In addition to all the drawings, you will find techniques of application and even phased instructions on creating decorative colors and other geometric figures that visually can be similar to high-quality 3D print.

Do it yourself

Lack of funds to buy a ready-made composition in a specialized store? Do not be discouraged, after all, armed with some knowledge and skills using them in practice, you can make a good structural plaster.

basis should take a lime-cement mixture. In addition, you can not do without plaster or clay. Natural solid particles are added to this mixture. It can be broken in a crumb of shell, stone crumb, sand particles, and even special flour;
if you choose an acrylic resin as a basis, it is not easy to use it with synthetic granules necessary sizes or krzka at the stone;
basically, on their own masters mix the plaster from cement-limestone or clay composition, all because necessary components will always be available for purchase.

Also necessary:

surely those who have come across the repair are aware of the existence of cement M400. Directly it will be most suitable for the implementation of the intended purpose;
to create stucco you do not do without lime. But, remember that it is worth acquiring only hawed or bring it to such a modified composition with its own;
when choosing sand, stop the eye on the river quartz. Often, consultants are offered to acquire orange sand, but it contains clay impurities. Before adding the component, it should be sifted, the more times, the better;
preparing the plaster You can not do without water, but do not hurry to run into the bathroom, it is better to go to the nearest spring and gain water from there.

To accelerate the process, some glue or gypsum can be added to the composition. If you want to achieve a result with an accuracy of the opposite (for example, during the drawing of the bulk decor), several milliliters of detergent add to the future mixture.

A little to know what materials are needed, if the sequence is not compared and the proportions are not expected. The volume of material is calculated in individual order. But, after all, it is necessary to take the proportion: 1x3x0.7, where the first number is cement, the second is sand, and the third is lime.

It is preparing to lime as follows.

The oversized mixture is properly hammered into the metal container, poured with water so that the top ball is completely covered, the lid closes and is placed on top of the additional cargo.

During the reaction, a large amount of heat is distinguished, which provokes the emergence of numerous evaporation. After some time, the resulting mixture is necessary to strain through the gauze layers and leave the resulting solution for another 24 hours.

"What a ratio should sand and cement be?" - The answer is simple: regardless of the area, connect these two elements 1: 3.

Surely there will be those wizards that they are ready to argue and say that it is more rational to take the ratio of 1: 6, but if you apply these knowledge in practice, they demonstrate that in this case you will create a little-elastic plaster, to work with which it will be very difficult.

After performing all previous steps, start entering decorative particles.

Dry components flooded using mortarwhich is mixed to homogeneous consistency. Stucco, which will eventually work out, will remind you of light gray water.

If you dreamed of a completely different shade, add a little mineral painting pigment.

Clearly see

If you want to see what options for structural plaster offer advanced international companies, be sure to check out several videos, which are presented on this channel.

There you will find a detailed consideration that such a structural plaster RollPutz, as well as a video of the useful inventory, which will be needed during the application of plaster.

Information and detailed familiarization with the structural plaster "lamb" Triora, you will find here:

If you do not know how to properly apply structural plaster, it will help you video:

Here, the main thing is that not only the composition of the acquired material is taken into account, but also the technique of its application, different non-accuracy only make the result more attractive, it is so that the unique decoration is obtained

Modern option decorative coating Walls or facades, which enjoys more and more people is structural plaster. In this article, we will consider the characteristics and types, advantages, features of the choice, as well as the technique of use.

Characteristic features of structural plaster

The popularity of the use of structural plaster is provided by a variety of color shades, as well as the ability to create any textures. Such a solution is always suitable for any interior and style of an apartment or country house.

By its structure, plaster is made of inhomogeneous masses and different fillers. Regarding the latter, the composition can be used by mica, quartz sand, as well as various mineral supplements. In some cases, wood fibers or silk thread are also added.

Structural plaster gives the form and texture due to the heterogeneous grainy mass. Usually, decorative mixture Made on different bases, for example, on mineral (still called cement-lime), synthetic latex or potassium silicate. All fillers are manufactured on solvents, for example, on water or organic. For internal repair work, it is recommended to use plaster made on the basis of aqueous solvents, as they do not smell and do not distinguish chemical substances in room. For facade finish Mixtures can be used on an organic basis.

One of the features of the plastering may be plasticity and multifunctionality regarding the use of various kinds of finishing tools. It is convenient that the factor is that the mixture does not need to dissolve the IL to mix with other materials, because all the products are sold in a homogeneous mass of approximately 15 or 25 kg.

Classification of structural plaster

Structural decorative plaster As usual is distributed over the basis of such subspecies:

the plaster with the mineral base represents the composition made on the cement, produced as a dry mixture that needs to be processed and prepared for repair;
silicate is a mixture based on potassium silicate. Such plaster can be immediately applied, only pre-stirred and smoked;
latex, produced as material with synthetic additives and is the most common type.

For the masters it is important to remember that plaster based on mineral additives is dissolved with water, and other mixtures with various kinds of solvents. All formulations can be applied, both during internal work and external, it should only be remembered that water based on water does not smell.

Selection of structural plaster

The scope of different types of structural plaster can be distinguished by such parameters:

1. Structural plaster on mineral base It is recommended to use for painting the facade of the house, because its main quality lies in thermal insulation properties.

2. Latex additive-based mixtures have resistance to excessive moisture. In their structure, they form a surface waterproof, and therefore their most useful to use in the bathrooms, which is most efficient. Such plaster does not apply for external work. Some of the manufacturers make a mixture only for internal work.

3. Plaster on a silicate basis is practically used when finishing the facade. It owns specific features such as resistance to the straight rays of the sun, as well as a different kind of natural impacts.

It is worth noting that all types of plaster are quite plastic and efficiently work with them, because they have a lot of advantages.

Advantages of structural finishes

Structural plaster to buy for painting room is not so much, because it is distributed over the wall with a thin layer, so the consumption of material is small. However, the approximate quadrature on the package should be increased by 15 - 25 percent, because not all manufacturers come honestly. It is worth noting that the plaster owns a mass of advantages:

1. To finish the walls are used various materials. Many use wallpapers, but in the plaster there are enough advantages so that when repairing the choice was made precisely in its favor. A wide variety of manufacturing technologies and decorative paints different colors And shades make it possible to pretend the rooms with individual, and the low price is an additional advantage of this processing method.

2. Plasters are divided into facade and interior. But there are also universal options that can be used in both cases. According to the type of binder, they are divided into organic and mineral. At the price of plastering can be in a wide range, but should be taken into account that they are durable than wallpaper, which makes it possible to reduce the cost of repairs in the future.

3. The quality of the proposed plaster today is much higher than before.

4. Much appeared different species Plasters, for example, Venetian. It consists of marble dust and water emulsion, in some cases hated lime. Granite dust can be used. This transparent plaster allows you to create realistic imitation textures. Effective view It has for imitation marble. Appearance Stuccoings at the same time do not differ at all from the present marble. Time proven, it proved its moisture resistance and durability.

5. Plasticity - distinctive trait These plasters, they can be applied by any tool. Also thanks to special additives, they can be washed and cleaned.

6. The advantages of the plasters are that they can be applied on any surface. They also mask the shortcomings of surfaces: cracks and dents.

7. Another pleasant feature of plaster is compatible with all kinds of insulation systems.

A large number of advantages is a weighty argument in favor of its choice as finishing material for walls, and lower prices for trendy views Plastekers makes them even more affordable. Thanks to the plaster, you can not only change the color of the wall, but also change its texture, relief and even imitate the noble rocks of the stone.

Technology for the application of structural plaster

The list of works on the distribution of structural plaster includes a specific sequence:

preparation of any surface;
process of application;
education or patterns.

Considering the fact that the structural plaster will be able to hide the main defects and irregularities, after all before repair work It is necessary to prepare a wall for work. This in particular concerns the walls made of concrete or brick. Consider all stages of applying in detail.

Preparation of the surface before applying plaster

Before applying plaster on the wall or other surface, it is recommended to prepare a base. Given the factors that the mixture can remove all errors, it is still necessary to pay attention to the consumption of material of structural plaster. The price of such a mixture is still higher than usual, so it is important that the surface is already perfectly smooth. So preparation occurs as follows:

it is recommended to remove the paint, tile or remnants of wallpaper;
apply standard plastering on the working surface;
explore the surface on the fungus or mold, and in a positive result, be sure to treat with anti-grib. With a huge area of \u200b\u200bdefeat, handle the walls again to completely get rid of bacteria;
after that, check the walls for the presence of irregularities and bugs. With large quantities, re-apply a plaster layer and try to align the wall;
all work is carried out in a standard order using different mixtures. If the wall already matches good sight, It is necessary to apply plaster again, but a certain type as the basis for a structural one.

After performing all stages, it is possible to apply structural plaster on the wall or a different surface. It is important to take into account that the Silicate Substance is the base of special red dyes based on quartz sand.

Applying structural plaster

Before starting work, it is important to close all the open surfaces, the floor and the ceiling to close with another material:

plaster owns a feature of increased adhesion, which makes it difficult for its remoteness from other surfaces;
the mixture can be applied in several layers, which depends on the consistency of the mass;
final strokes are formed using a roller or special tool For the invoice, which will give a certain pattern to your room;
the more layers are distributed over the wall or ceiling, the texture becomes relief, but in this case, all other layers should be thinner than the previous ones. In practice, they are applied about two or three layers.

As a rule, the plaster is applied with a roller in the top view. Otherwise, the mixture will sprinkle on the already applied layer, which will create defective zones, fix that is difficult.

Selection of patterned textures

Choosing an invoice for the room, you can see the structural plaster photo, which is presented in the article.

For example, it is quite realistic to make a wall under ancient or display an antique marble coating and so on. Also possible installations can be walls under wood, skin, or in the form of abstractions.

In stores you can offer artistic application of plaster. Professionals and specialists will display all your desires, embodying interesting patterns into reality. Of course, the cost of such services is not small, so most prefer to do everything with their own hands.

Like all other materials, structural plaster has some features when working with it. We offer a couple useful Sovietsthat will help make your work easier and professional. Before starting work, it is important to close all the free spaces with a glue or paper so that the plaster does not fall on the floor or on the ceiling, and after not to handle it from the surfaces.

Also, it is recommended to make a test applix of the mixture on another material. After you wait until everything gets free, so you can see the real shade of painting. By choosing the most suitable for you, you can start applying plaster over the entire surface. It is all necessary that your expectations are justified at the end of the repair. To better understand the work process, you can see about structural plaster video instructions from famous masters.