Which firm's plastic panels are better. Which pvc ceiling panels are better for the ceiling: types and sizes

Every year, plastic panels for the bathroom are becoming more and more popular among finishing materials. If earlier the tile was considered the best option for decorating the walls in the bathroom, now it has a worthy competitor in all respects. These are plastic wall panels that are ideal for rooms with high humidity, i.e. bathrooms and kitchens.

Repairs are troublesome and very expensive. For this reason, many are trying in every possible way to save money and simplify this process. To do this, manufacturers of materials for interior decoration have come up with many different methods and periodically supplement the range with more advanced products.

They are so convenient and practical that some apartment owners use them in places where there is no particular humidity, but the coating on the walls must be good and durable. We are talking about narrow corridors and hallways.

Patterned bathroom panels are very popular

Still, the most common use of plastic wall panels is found in bathrooms. The popularity of this type of finishing materials is quite justified. The panels are easy to install and cost significantly less than tiles. The price of bathroom panels, the photo of which is just below, depends on the quality and the manufacturing company. At the same time, the plastic perfectly withstands both high humidity and sudden temperature changes, remaining in its original form.

An additional plus is the color range offered by manufacturers. Bathroom wall panels are so diverse that every (even the most demanding) buyer can find what he likes. Patterned bathroom panels such as marble, granite and other natural materials are very popular. Often, in addition to the walls, a screen under the bathroom is also installed in a similar color scheme. This is very convenient and makes it possible to hide communications behind a kind of screen.

The panels are easy to install and are significantly cheaper than tiles

In our time, wall panels are used as often as tiles. Moreover, the first option can often be found outside the bathroom. If it is customary to mainly lay out only the apron in the kitchen with tiles, then the walls can be completely decorated with plastic panels. It is very convenient, practical and looks very good.

PVC bathroom wall panels are chosen for their numerous and undeniable advantages. Plastic has a high level of fire safety, since modern materials do not support combustion. At the same time, the moisture resistance of the panels is very high. Material of this type will not allow moisture to pass through, which will exclude the possibility of rotting. With moisture and fairly high temperatures, PVC panels do not deform.

The indisputable advantage of plastic is that it perfectly tolerates both high temperatures and low temperatures, for this reason, it can be used even in rooms where there is no heating.

Plastic has a high level of fire safety

The service life of plastic panels is much longer than that of other materials that are often used for wall decoration in the bathroom. PVC will last even longer than tiles, not to mention regular paint and wallpaper. Moreover, plastic is an environmentally friendly material. It does not emit toxins even when heated significantly.

And yet, most of the owners do the decoration of the bathroom with plastic panels, the photo of which can be seen just below, due to the affordable cost. Thus, repairs in the bathroom and toilet will be much cheaper than using tiles. The ease of installation of plastic panels cannot be ignored. Complex tools are not needed to install them, and the work itself takes place in relative cleanliness, which is very rare during repairs.

The bathroom, finished with plastic panels, will not only last a long time without the need for re-repair, but also has a wonderful appearance. Depending on his preferences, the landlord can choose the most suitable texture and color for himself.

Bathroom finished with plastic panels will last a long time and has a great appearance

Types of plastic panels

Before proceeding with the choice of plastic for renovation, you need to decide on the type of PVC panels for the bathroom, since this type of finishing material is sold in several variations.

Rack panels are characterized by a narrow and long shape. They can be installed vertically or horizontally. Depending on the type of installation, the bathroom can become either wider or visually elongated. This is useful for correcting small or very low rooms.

The PVC strip panels are sold in various colors. At the same time, experts recommend not to dwell on one shade or structure. A little imagination - and from the slatted panels you can create something special that will delight the tenants of the apartment and surprise the guests. Often, slatted plastic panels are used to decorate a high-tech bathroom.

Rack panels are narrow and long in shape

Plastic bathroom panels in the form of tiles are considered more convenient than rack-and-pinion, since they are small and their installation is extremely simple. If necessary, you can choose plastic panels from 30 centimeters or more. There are also meter options. This type of panel is considered the most profitable, therefore it is chosen by economical owners.

Here, too, it is not necessary to use only one color. PVC panels in the form of tiles look good when laid in a checkerboard pattern or create an unusual geometric pattern.

When a large wall is to be finished, it is most convenient to use sheet plastic panels. They are dimensioned in such a way that the number of joints is minimized. Thus, you can significantly save on material. The only drawback of large sheet panels is that it will not be possible to combine different colors, so the room can turn out to be somewhat monotonous and boring.

Regardless of what type of PVC panels for the bathroom will be used, all these types of material have a high level of moisture resistance, maximum environmental friendliness and practicality, that is, they are easy to wash and clean. A big plus of plastic panels is that they do not allow moisture to pass through even at the joints. In addition, PVC materials provide good heat and sound insulation.

Installation nuances

Experienced craftsmen know how much easier it is to work with plastic than with tiles. Nevertheless, the installation of PVC panels has many nuances that you need to know about, and they cannot be ignored in any case. If a person does not even have the slightest idea of \u200b\u200bhow to decorate a bathroom with plastic panels with his own hands, it is better to watch the video, which can be downloaded below. As a last resort, you can leave this job for professionals.

It is rather difficult and risky to install plastic panels in the bathroom yourself.

Tiled and slatted panels are the hardest to work with. They will definitely need a crate, which is a frame made of metal or wood. It is attached to the wall with brackets, and then it will support the panels. With sheet panels, everything is much easier, since they can simply be fixed to the wall. Sheets, slats and tiles are connected to each other by special fasteners.

In order to correctly install plastic panels in the bathroom, some rules must be taken into account. First of all, you need to correctly calculate the distance between the frame rails so that the structure is as strong as possible. You also need to think about how you can make the joints more tight. In addition, special overlays are used that hide the places where the screws were used.

Experts say that it is quite difficult and risky to install plastic panels in a bathroom on your own, since incorrect installation will only be a translation of a rather expensive material.

The service life of plastic panels can be up to 25 years

It is better to combine the installation of PVC panels for the bathroom with a general renovation in this room and the bathroom. Thus, once you take care of the walls, ceiling and floor, you can forget about repair work in this room for a long time. Finishing materials manufacturers claim that plastic panels can last up to 25 years.

Experienced craftsmen recommend immediately repairing the bathroom not only around the perimeter, but also to deal with communications, replacing plumbing and all kinds of fittings. An integrated approach will ultimately be cheaper, both in terms of money and the amount of nerves spent.

Options for attaching plastic to walls

If the owner of the apartment has enough knowledge in the field of repair, desire and free time, while the plastic panels have already been purchased, it is worth considering how to install them. There can be several fasteners for PVC panels.

We offer you to get acquainted with the distinctive features of PVC products and their main standard sizes.

Read in the article

Scope of PVC panels

This finishing material is not afraid of moisture. It is widely used to decorate walls and ceilings in rooms with high humidity levels. It is used for finishing,.

Sufficient frost resistance makes it possible to use the panels for decoration, in an apartment or a terrace in a private house. Since the material is environmentally friendly, it can be used for decoration of residential premises. Ease of maintenance (the resulting stains are easy to clean) makes PVC panels relevant for the decoration of utility rooms.

Plastic slats are relevant not only for residential premises. With their help, walls and ceilings are designed in sales areas and office premises. In some cases, the products are used as decoration and or window.

Varieties of PVC panels by purpose

This finishing material is widely used for wall and ceiling decoration. The former have higher strength characteristics, the latter are lighter. When choosing, you should pay special attention to the purpose of the model you like.

Attention! PVC wall and ceiling panels are not interchangeable.

Wall models have a length of 2.5 ÷ 6 m, a width of 25 ÷ 30 cm and a thickness of 6 ÷ 10 mm. Considering that the ceiling is not subjected to mechanical stress during operation, the ceiling products are made thinner. Their sizes are 6 ÷ 10 m, 25 ÷ 30 cm and 4 ÷ 5 mm, respectively. Manufacturers offer products with matte, glossy surfaces, as well as varnished.

Using PVC panels as a finishing material, you can dispense with preliminary preparation of the base. Installation can be performed without the use of special equipment, which significantly expands the possible area of \u200b\u200buse.

Panel views by joining method

Manufacturers offer lamellas with different connection patterns. The presented assortment can be divided into products:

• seamless type;
• with a chamfer (rustic);
• with a relief surface.

Seamless products are relevant for ceiling decoration. Due to their special design, they are located quite close to each other during installation work. Observing the technology for performing installation work, you can make the connecting line practically invisible.

Attention!Low-quality PVC panels can undergo deformation changes as a result of thermal effects. This will cause a change in the shape of the formed coating. Material should be carefully selected.

Beveled PVC panels have a characteristic decorative recess at the joints of the lamellas. Such products are sometimes called rustic. Most often used for ceiling decoration.

Panels with a relief surface are relevant when decorating walls. A special finish significantly increases their strength characteristics and wear resistance. This is reflected not only in the appearance of the formed surface, but also in the selling price.

Advantages, disadvantages and properties of PVC panels

Plastic finishing materials made of PVC of all sizes have a number of undeniable advantages:

1. Excellent light and moisture resistance, resistance to environmental influences. The formed coating is able to maintain its presentable appearance for a long time.
2. Mechanical strength with a relatively low weight of the lamellas.
3. Heat and sound insulation.
4. Ease of machining. To form the required contour, you can use the standard set of carpentry tools. The individual panels can be glued and welded as required.
5. Environmental Safety.
6. Compliance with fire safety requirements.
7. Versatility. PVC panels can be used for decoration of premises for various purposes.
8. Various sizes. The presence of standard standard sizes allows you to use products of different sizes or the same size, but with a different pattern for decorating walls or ceilings.
9. A wide range of. Manufacturers offer with different textures and colors, which allows you to choose the right option for any interior.
10. Presentability. If desired, the appearance of the formed coating can be changed by applying a self-adhesive film or paint coating to the surface. The possibility of applying solvent or silk-screen printing will allow you to become the owner of a unique material. The availability of additional additional decorative accessories allows you to emphasize the contours of individual lamellas.
11. Long service life up to 20 years.
12. Ease of installation. Products can be mounted not only strictly vertical or horizontally, but also at any angle. Installation can be done in-house.

With the undeniable advantages of the material, there are a number of disadvantages. Sometimes the use of PVC panels can be, if the premises serve as escape routes in case of an emergency. When PVC burns, it forms corrosive smoke.

How to choose and buy high-quality PVC panels

Having decided to buy PVC panels, you should first decide on a suitable model. Given the wide range of products offered by manufacturers, in the selection process, you should focus on the main purpose of the room. Based on the choice, it will be easier to make a choice in favor of a particular model.

During the purchase process, you should make sure that all products have a perfectly flat surface. Only in this case the formed coating will have a presentable appearance. All lamellas must be from the same batch so that they do not differ in color. It is better to make a purchase in a specialized store.

If you have not yet decided on a suitable model, we suggest looking at the photo of PVC panels in order to make it easier to make a choice

1 of 6

PVC panels: dimensions, form of release

The thickness can be 5 mm or 8 ÷ 10 mm. For these standard sizes, manufacturers offer moldings with a standard configuration and dimensions. The sizes of plastic panels depend on their form of release. Manufacturers make lining by 3 m. The length of wider panels can be 2.6; 2.7 or 3 meters. Some manufacturers offer material up to 6 m in length. This length is sufficient in a room without horizontal seams. Width depends on the form of release:

• Lining. Width 10 cm. Manufacturers offer lamellae with a standard wide lock, which is sometimes called European, and with a narrower one (polka). In structures with a double profile, the width increases to 12.5 cm. However, this material has found limited use. lining can be different. However, the most widespread products are white;
• Panels. The width can be 15 ÷ 50 cm;
• Sheet. Width 80 ÷ 203 cm with a length of 150 ÷ \u200b\u200b405 cm. The thickness of the sheets can reach 30 mm.

The main types and sizes of PVC ceiling panels

When choosing a plastic profile for the ceiling, you should not only pay attention to the appearance of the material you like, but also correlate its dimensions with the configuration and dimensions of the room. It is worth giving preference to the standard size that will minimize waste. So, if it has a width of 1.5 m, most often choose PVC ceiling panels with a length of 1.5 ÷ 3 m. Using lamellas, the length of which is a multiple of the length of the room, you can reduce the number of butt joints.

Ceiling decoration is most often performed using products with a length of 2.5 ÷ 4 meters and a width of 10 ÷ 50 cm. The lining and profile of standard width are quite popular. The choice of standard size depends not only on the size of the premises, but also on the shape and location of the lighting fixtures.

The main types and sizes of PVC panels for walls

To decorate the walls, choose a material made of polyvinyl chloride, having a width of 0.5 ÷ 2.3 m and a length of 1.5 ÷ 4.05 m.The thickness can be 1 ÷ 30 mm. In the first case, the foundation must be properly prepared.

The dimensions of PVC wall panels depend on the design of a particular room. If with their help it is planned to finish only part of the wall, choose a material with the closest length, a multiple of the height of the finish. The shape of the profile can be different, but sheet material is the most popular.

Attention!When using large panels, installation work can be significantly simplified.

Characteristics and dimensional parameters of sandwich panels

They are in demand when decorating walls. They are distinguished by their increased cost, demonstrating an attractive appearance and high mechanical strength. With their help, slopes are often erected and formed.

The sizes of sandwich panels differ significantly. Manufacturers offer material that has a length of 3 m with a width of 0.9, 1.15 and 1.5 m.The standard thickness of products is 1, 2.4, 3.2 and 4 cm.

The main advantage of PVC sandwich panels is their high resistance to external influences. The formed coating can last at least 20 years.

Article

When making repairs in an apartment or house, the question of choosing materials often arises. After all, they must be both attractive and of high quality, and fit the chosen interior. The modern market offers a huge amount of finishing materials, and among them, PVC panels have recently begun to stand out. Due to the variety of options for this material, you can experiment. However, the abundance of options can make you choose the most suitable material for a long time.

Properties and characteristics

To understand what PVC panels are, you first need to find out what these three letters hide behind them. In fact, everything is extremely simple - they stand for polyvinyl chloride (organic polymer). This is a type of plastic with its own advantages and disadvantages.

This polymer material is used for decoration, and it is worth noting that recently it has become clearly very popular. The composition of polyvinyl chloride includes chlorine (57%), carbon (42%), hydrogen with impurities (about 1%). It is very rare, but still found, that lead is added to the PVC composition as a stabilizer. Of course, because of this component, there were rumors that the panels are unhealthy. However, today lead is substituted by zinc and calcium in equal proportions, and therefore they are completely harmless.

PVC panels are produced in standard sizes according to GOST. So, the length of the panels is 2700, 3000 and 6000 millimeters, and the width is 100, 250 and 375 millimeters. As for the thickness, it depends on the manufacturer and model, and its value varies from 1 to 30 millimeters.

PVC can be used at temperatures from -50 to +60 degrees. Moreover, it is desirable to use the panels for interior decoration. This is due to the fact that the temperature difference in the premises during the day is not too strong. Of course, there are types of panels, for example, for finishing a balcony, that are resistant to extreme cold or sunlight. In addition, they easily tolerate temperature jumps.

The strength of the panels depends on how many percent of the polyvinyl chloride they contain. The number of stiffeners also affects the strength. Moreover, the ribs should not show through the front side of the panel.

The colors and texture of PVC panels are completely unlimited. Today you can find both white classics and wood or stone style, and you can get absolutely any shade to order. It should be noted that when painting this finishing material, water-based paints are used.

The surface of the panels can be either matte or glossy. The manufacturing technology is the same - varnishing, just after polishing the panels undergo additional processing. Such a coating carries not only a decorative function, but also a protective one. After this treatment, the material becomes antistatic, wear-resistant, resistant to mechanical damage (scratches), and also better tolerates ultraviolet radiation.

The lining made of polyvinyl chloride is used for finishing walls and ceilings in residential premises, offices, shopping malls. Moreover, in apartments they can be used everywhere, including the entrance hall, bathroom, kitchen, living rooms. Of course, they are most often used in the bathroom and in the kitchen. Also, panels are used for finishing slopes on windows, as well as loggias and balconies.

Such an extensive use of this finishing material is primarily due to the fact that it is easy to care for and even easier to install. The low weight allows you to decorate both walls and ceilings with such panels even alone. Moreover, they are sold in very convenient packaging, which greatly facilitates their transportation.

Another important property of PVC panels is that they have a low degree of flammability. This just allows them to be used without undue hesitation, in particular in the kitchen, even next to a gas stove.

Advantages and disadvantages

Plastic panels, which are also widely known as plastic lining, have come a long way until they were appreciated. To understand why they've become popular lately, it's worth knowing their pros and cons.

Of course, it's worth starting with positive qualities:

• Affordable price. This quality can be safely called the most important advantage of PVC panels. The cost of this material is several times lower than most other materials for decoration. Moreover, despite the low cost, plastic panels also have excellent properties.
• Ease of installation... It is very easy to work with PVC. As a result, they are often assembled independently, which saves money on the services of a specialist. In addition, the ease of operation also saves on finishing time.

• Disguise flaws. Such a finish will become irreplaceable even if there are any flaws on the walls or ceiling. With their help, any irregularities or other defects are hidden very easily. After finishing with this material, a flat and pretty room is obtained.
• Easy to replace damaged PVC panel... In the event that for some reason one of the panels was damaged, it can be easily changed to another. As a result, you do not have to renovate the entire room again, which again saves time, effort and money.

• Easy to clean... A room with panels will always look clean, because they can be easily wiped with a damp sponge. To make them always look like new, simply wet cleaning periodically is enough. Of course, special attention will have to be paid to the joints of the panels, but these are trifles.
• Resistant to moisture.Not every finishing material can be used to decorate a bathroom or a room with a high level of humidity. At the same time, rusty deposits do not form on the panels and fungus cannot appear. Thus, they make it possible to fulfill the dreams of many housewives about the absence of problems with excessive moisture in the kitchen and bathroom.

• Little weight... Lightweight panels will not harm the supporting structures at all. Moreover, they are easy to transport and install, even alone.
• Long service life. Quality PVC can look like new for 40 years. Such dignity cannot remain unnoticed in any way.
• A wide variety of colors. A huge palette of PVC makes it easy to match them to any interior. Moreover, quite often the demand is not for plain panels, but with drawings, as well as in the form of imitation of wood or stone.

• Environmental friendliness. If quality materials are chosen, then they are completely non-toxic.
• Sound and heat insulation. Decorating the rooms with PVC makes them even more soundproof. At the same time, they will also retain heat better.
• Strength. Not everyone agrees with this dignity. In fact, the panels are durable and flexible, but many make the mistake of choosing. After all, for wall decoration, panels with a higher density should be used, and "lightweight" options are also suitable for the ceiling. Light blows and other minor mechanical damage to the panels are not terrible.

• Withstand temperature fluctuations. Most PVC panels easily tolerate temperature fluctuations from +50 to -50 degrees.
• Versatility of application... In addition to walls, ceilings, windows, door slopes, they are also used to create shower stalls, formwork of non-standard shapes is mounted. And even summer residents found a use for them, forming excellent beds out of them.

With all the presence of so many advantages, the negative qualities of this material are not so many:

• Distortion due to sudden changes in temperature. Of course, this material serves well in a certain temperature range. However, if there is a sharp jump, for example, by 20 degrees (it does not matter in which direction), then it can deform.
• Reducing the area. Sometimes in the premises it is necessary to use additional structures for the installation of panels. For example, if the walls are very curved, you first have to install a wooden or metal frame. As a result, the area of \u200b\u200bthe room may decrease somewhat.

• Acrid smoke in case of fire. PVC is practically non-combustible, but when it burns, it produces a very corrosive smoke. Therefore, prolonged contact with it can be harmful to health.
• UV-resistant. This drawback is especially noticeable on white panels, which turn yellow over time under the sun's rays, losing their beautiful appearance.

• Bad smell. This minus of panels disappears in a few days after their installation. Moreover, it does not always happen.
• Not suitable for children. Despite the high environmental friendliness of the panels, many experts do not recommend using them for children's rooms. In addition, some cheap panel options may contain harmful substances.

Varieties and application

There are a large number of plastic panels on the modern market. With them, the cladding of houses becomes pleasant and simple. Surprisingly, decorative PVC wall panels can make walls look like laminated ones. They are very different, and you can choose them even based on the type of furniture.

However, such a variety can sometimes even make the choice difficult. To make this task easier, it is worth taking a closer look at each of the types of panels that are on sale:

• Rack (vinyl) panels, they are also plastic lining. With their appearance, they really strongly resemble lining, hence the name. This type of panel is used for both wall and ceiling decoration. Moreover, the main advantage of the view is that the lining can be placed both horizontally and vertically. The first option will visually increase the height of the ceilings, and the second will slightly reduce it. Such type-setting rectangles are attached to the wall using metal brackets or just glue.

The most popular types of lining by connection:

"European" has a wide lock;

"Polka" is distinguished by a narrow lock connection.

• Panels for tiles. By themselves, such typesetting panels are often squares, that is, they look like familiar tiles. Installation of this type of material will be very difficult and time consuming. However, in the end, you can experiment with interesting designs, including unique author's ones. Squares differ in size, design, texture.

This type is especially relevant for interior decoration of a bathroom or kitchen. Moreover, in the latter case, it is best to select only the working area with panels for the tiles.

Installation of such panels is carried out using a special adhesive. They are connected to each other like a constructor or a puzzle - the panels have grooves and protruding parts, with which they are attached.

• Sheet panels, or seamless. They are by far the most beautiful type of PVC panels. This is due to the fact that no joints are formed between the panels during installation. Most often they are used for wall decoration. Installation of this type is carried out with glue or nails.

• Sandwich panels.This type is often used as a decorative finish. With such panels, any room will look more representative and aesthetically pleasing. They are also used for finishing partitions and window slopes. These panels consist of two sheets.

In order for this material to acquire the best thermal insulation properties, expanded polystyrene or polyurethane foam is used as a filler for it.

According to the material from which the outer layer is made, sandwiches are divided into three types:

Laminate. This plastic is formed by combining decorative paper, kraft paper and overlay. All this is impregnated with formaldehyde and pressed. Possesses high strength and reliability. Withstands even heavy loads.

Foamed. This plastic has a porous structure. Best suited for humid locations. In addition, it is a good thermal insulation material. The surface of such panels, as a rule, has a roughness.

Hard. It can be matte and glossy. Quite often it is used for finishing window slopes and door openings.

Dimensions and decor

The sizes of PVC panels differ depending on their type. Therefore, it will not be superfluous, before choosing the desired option, to familiarize yourself with what the panels can be in size. Indeed, depending on this, you can choose the most optimal option for a particular interior.

Dimensions of plastic lining:

• thickness - from 8 to 12 mm;
• length - from 300 to 1200 mm;
• width - from 100 to 500 mm.

Sizes of panels for tiles:

• thickness - from 0.5 to 1 millimeter;
• length - up to 1000 millimeters;
• Width - 500-1000 mm.

Sizes of sandwich panels:

• thickness - from 10 to 32 mm;
• width - from 900 to 1,500 mm;
• length - up to 3,000 mm.

In addition to the size, the panels also differ in their decorative appearance. The coating of the panels is different, which can be glossy or matte. They can be colored, patterned and even embossed. For example, the lining is most often white matte or glossy; sheet panels can even imitate tiles in their appearance.

Depending on the type of coating, the panel can be matte or glossy. There are also differences depending on the application of paint to the panel surface. For example, a drawing is applied to a white panel, and then using a special paint roller it is painted in colors. After that, a colorless UV varnish is applied as a protective layer.

There are also types with thermal printing, which makes them more diverse and affordable. However, such options serve less time.

Of course, today it is completely easy to choose the finishing options, even if the interior design requires something special. For example, if a marine or suburban theme is played up in the interior, then panels with an imitation of a stone cut will be an excellent option. PVC options with the image of natural slate look amazingly realistic. This solution is especially relevant for the bathroom.

Very sophisticated and subtle options among plastic tiles are also not uncommon. You can choose models in blue marble. With a few décor elements that fit, a room with these tiles will be the height of elegance. Of course, the most common color is white or patterned panels. However, dark colors have shown that they are in considerable demand.

Among those in demand are red shades, transparent panels, imitation of bamboo. Wide and thin sheets of panels look especially impressive, which give the walls the most smooth and luxurious look. It is worth noting that wood-like panels (especially pine) also proved to be one of the most popular.

Mirror PVC can be an amazing decor, which instantly gives the room an attractive look. They are actually polystyrene glass that is attached to the frame. Moreover, a pattern, perforation can be applied to its surface, or it will be with a holographic effect.

Panda panels are distinguished by their exclusive design. They have very high quality and bright drawings. Moreover, the images are visible very clearly, it is not difficult to see even the smallest details. The interiors of the bathroom, hallway, kitchen or living room with such panels will be chic. Indeed, the collections feature one main drawing and from one to five additional ones.

An excellent solution would be chic wenge color options. Their deep dark brown, approaching black, will add a real tropical flavor. An instant makeover can be achieved using black and white patterns on PVC. For lovers of brighter and more luxurious, there are options in combination with a golden hue.

There are a huge variety of PVC decorative designs. It is enough just to choose the right variation for a certain interior.

Manufacturers

There are a large number of panels from different manufacturers on the market. Of course, among them there are options that were able to prove the quality of their products. It is on such PVC that you should pay attention when choosing. Today, among the entire assortment, such manufacturers as KronaPlast, Aquaton and Vox stand out.

"KronaPlast"has been working on the PVC panel market since 2000. Currently, this company is the leading manufacturer of materials for decoration. Among the company's products, you can also find plastic panels for walls and ceilings, lining, floor plinths, accordion doors, moldings. Special attention should be paid to decorative plastic panels, the "Ceramics" collection for tiles, laminated, offset and ceiling panels from this manufacturer. The company's products are also distinguished by a large number of colors for every taste.

LLC "Aquaton" has been in business for over 16 years. The company now manufactures a large number of fiberboard and PVC materials. The manufacturer represents not only panels, but even PVC window sills, sheet panels, as well as various accessories. Aquaton offers interesting options in its Novita collection. This collection also includes wall and ceiling panels, moisture resistant floor coverings and rigid PVC composite marble.

VOX has been producing building materials and furniture since 1992. Today the company represents a huge amount of PVC materials for outdoor and indoor use. Moreover, there are panels for walls, ceilings and even facades. The company constantly cares about the development of technologies, which allows maintaining high quality and affordable prices.

Vox decorative panels are suitable for finishing both residential premises and commercial real estate (offices, shops, utility rooms). Unique interiors can also be created with Vox's Didital Print collection. It should be noted that the colors of the panels of this manufacturer are distinguished by a special European aesthetics.

Today you can buy high-quality and interesting panel options even in the online store. For example, the Axon store offers a large number of finishing panels for any interior from leading manufacturers. At the same time, they can even be ordered delivery by a certain time, which is very convenient. You don't even have to leave the house to update the interior.

Criterias of choice

When choosing PVC panels, you should pay attention to a number of some parameters. It is advisable to first decide where exactly the panels will be used. Today they are used not only for walls and ceilings, but also as facing for balconies and loggias, slopes of windows and doors, and even as floor formwork for steps of an original form.

One of the main parameters is the stiffeners inside the panels. It is they, or rather, their number and location (at least 10 millimeters between them) that determine how high-quality the product is. The higher the stiffness, the more pressure the panel can withstand. Moreover, the ribs should not be visible through the front side of the PVC.

It is also worth carefully examining how the paint is applied to the surface. Ideally, it should lie in an even layer, and there should be no spots, streaks or other defects. It will not be superfluous to carefully inspect the panels for scratches, dents, cracks. It is best if the panels are covered with a protective film.

Before choosing panels with a pattern, special attention should be paid to how it is made: thermal printing, offset printing or lamination. After all, each panel will need to be installed so that a full-fledged image is obtained. Moreover, such panels require very accurate measurements. Having made a mistake with the calculations, then you may not find the necessary drawing. It should be borne in mind that when ordering a batch with a similar pattern, you can find out that the panels differ in some details in the image.

For living rooms, printed panels are the best option. As for bathrooms, as well as kitchen spaces, thermal transfer options should be selected for them. Such panels are better suited to detergents and frequent friction.

When choosing panels, be sure to check how tight their joints are. The smaller the inter-seam space, the more neat and even the wall looks. Of course, seamless panels are the best option.

The weight of the lining matters, and this must be taken into account when choosing panels. Based on this parameter, you can get an idea of \u200b\u200bthe panel wall thickness, stiffness and number of stiffeners. For example, one square meter of standard PVC lining weighs about 1.5 kilograms.

Panel thickness is also important. It often ranges from 0.1 to 10 millimeters. However, this parameter is of greatest importance when decorating walls. And in this case, the greater the thickness, the better. For ceilings, you can also select panels with the smallest thickness.

According to professionals, high-quality plastic lining contains about 20 percent chalk. If this indicator is higher, then the product will be more fragile. To check the amount of chalk in the material, bend the corner of the panel. In a plastic product, in the place where there was a bend, neither a strip nor a crack will appear.

When choosing panels, it will also be useful to sniff at them. After all, if in the store where finishing materials are sold, there is a sharp smell of plastic, then this indicates their toxicity. In fact, the specific smell should only be when you open a new package with lining. Moreover, it can in no way be called sharp.

Well-known trade brands already have a well-deserved reputation, therefore it is better to choose well-known brands that try to maintain quality at a decent level.

When choosing panels, you need to think in advance where exactly they will be used. After all, PVC are ceiling and wall. Recently, you can even find floor panels. By design, they practically do not differ from each other, but their strength and some characteristics still differ.

If the material is purchased for wall decoration with large dimensions, then it is better to opt for sheets of maximum sizes. Thus, the interior will look more aesthetically pleasing.

The resistance of PVC to various temperatures deserves special attention. Especially this parameter should be taken into account when choosing a material for finishing a kitchen, bathroom or balcony.

Price also matters. Moreover, it often depends on the manufacturer and quality. However, it cannot be said with absolute certainty that the most expensive panels are of the highest quality. Better to stay in the middle.

Having chosen specific PVC panels, you can even ask the seller for a certificate confirming the quality standard, as well as durability, fire safety and other parameters of the product. Do not be afraid to request these documents, since their absence indicates a poor-quality product.

Panels with frieze are lightweight and highly durable, which makes them indispensable for bathrooms or kitchens, where interior partitions are made of fragile drywall. Panels for natural stone or wood are also an excellent solution. Moreover, the first option is lightweight, but looks very realistic, and the second is moisture resistant and does not lose its appearance over time. PVC with a 3D image will also be an interesting option.

For finishing a balcony or loggia, laminated panels will be an excellent option. They do not fade in the sun, do not crack, do not deform from low temperatures. In terms of resistance to mechanical stress and image quality, such panels can easily compete even with MDF.

If the apartment has high ceilings, then it is best to opt for glossy panels. They are an excellent light reflector that will make the room even brighter and more pleasant.

Hardware for the installation of PVC panels is also not the last point that should be considered when choosing. After all, the molding (special fasteners) must be of high quality, fit along the grooves to the thickness of the panel and be matched exactly in color. Otherwise, the fittings will stand out too much against the background of the panels. You should also be aware that the moldings may differ depending on the surface to be veneered.

Mounting

Finishing with PVC panels can be carried out with the installation of the frame or installing panels without crate. To better understand which method to choose, it is worth reading them in more detail.

The simplest option is to install the frame. A wide variety of materials can be used for its manufacture.

A timber frame will fit most living spaces. However, it is worth remembering that it is not suitable for bathrooms or kitchens, as it does not tolerate high humidity. And in these rooms, the panels will have to be washed frequently.

For quick installation, you must use a frame made of plastic strips.

The most reliable frame is definitely a metal profile. Of course, it should be borne in mind that it is very expensive.

To install panels without any lathing, you need to have solid experience, as well as even walls and ceilings. Of course, you can try and understand this process, but it should be borne in mind that skills are also important here. The main disadvantage of this method is that if one of the elements loses its appearance, then to replace it, you will have to revet the entire wall.

Which of the methods to use should be decided solely independently. Here it is necessary to take into account the area of \u200b\u200bthe room that will be finished, and the disadvantages of walls with ceilings, and most importantly, take into account the peculiarities of the microclimate.

When you have decided on the installation method, you should proceed to preparation. At this stage, you will need a tape measure, a level, a ruler (preferably a meter), a pencil or marker, a screwdriver, a drill, dowels, screws or nails, a stapler, a hacksaw. In addition, it is worth preparing bits, drills, staples and other consumables in advance. If you take care of all this in advance, then the time for finishing can be significantly reduced.

You should not mount the panels on the walls as soon as the sheets were brought home after purchase. It is best to give them 24 hours to mature. For this, the panels are unpacked so that they can "get used" to the room conditions.

Also, at the preparatory stage, a complete dismantling of the old wall and ceiling covering should be carried out. Then it is necessary to carefully level the surface, close up holes and remove other defects so as not to spoil the quality of the PVC coating. Otherwise, the panels will bulge in places, and in the future, their deformation will occur. At the end of the preparation of the walls and ceiling, they should be covered with an antiseptic. This is especially important in the bathroom and kitchen.

Frame mounting has several advantages. The main one is the ability to eliminate significant irregularities and various wall defects. Also, the frame allows you to make the thermal insulation of the room better and hide various communications.

When the walls and ceiling are prepared, you can begin to mark them. This is done exclusively with the help of the level. It is important to avoid even small mistakes here.

Installation of the frame starts from the bottom. The lowest row should be raised above the floor by 1-2 centimeters. This will allow the panels to fit very tightly against the wall. Next, using a square, a level and a pencil, you need to make a mark and go up 50 centimeters. At this point, you need to make another part of the frame.

Repeating this procedure, you need to reach the ceiling itself. Upon completion of the work, it is necessary to assess how parallel the lines are and whether they are at the same distance from each other.

When all the lines are outlined, you can install the crate. For wooden lathing, it is better to additionally use a disinfectant solution. The dowels should be installed at intervals of about 50 centimeters, and then fix the slats on them. Moreover, if the wall has obvious irregularities, then the grooves can be filled with chips or special wooden wedges of suitable sizes. It is worth noting that a wooden frame is best suited for finishing dry rooms.

The frame can also be created from a metal profile. This option is especially relevant for the bathroom, where the humidity is constantly high. During installation, an important point is the direction of the panels and the profile itself.

The most modern version of the frame is a plastic crate. In this case, the guides are attached to the wall using dowels. Clips are inserted into a special groove, and PVC is held on them.

When assembling the frame, it should be borne in mind that it is desirable to maintain a distance of 8 centimeters from the wall to the panels. This is necessary for normal air movement to avoid too much moisture.

After creating the frame, the panels themselves can be mounted. Installation usually starts from the left corner of the room. First, you need to install an inner plastic corner, which has connectors oriented to adjoining walls. After that, you should fix the upper and lower skirting boards.

Next, you need to attach the plastic panels to the surface and take measurements. It is important to take into account that they must be inserted into the slots of the lower and upper skirting boards. Measurements are best done with a tape measure and very accurate (to the millimeter). The first panel must be inserted into the corner, and if necessary, then cut the groove part using an ordinary construction knife.

Then the panel is cut to the desired length and inserted into the upper plinth, after which its lower part is folded over and immersed in the lower plinth. In the event that all measurements were made correctly, the panel will fit tightly and evenly. Now you can connect the grooves of adjacent panels and secure them using self-tapping screws or a stapler and staples. You can use silicone to remove the gaps at the joints of the panels.

This is how all panels are mounted. When the installation is complete, the molding should be installed. It is thanks to him that the finish will be more reliable and visually attractive. It is necessary to install molding elements along the perimeter and seams. You can make holes in the PVC panel for sockets, pipes or lamps with a simple stationery knife.

The panels can also be mounted using a frameless method using glue. However, it must be borne in mind that it is not as durable as the frame one, and the walls should be carefully aligned for it.

It is worth considering that if the panels are to be installed using this method, then the surface should be primed in advance. For this procedure, you must use special solutions that are selected depending on the material of the walls.

When installing panels on glue, it is important to choose a quick-drying glue (you can use "liquid nails"), which will not leave streaks, since it will not work. However, it must be resistant to excessive moisture. The glue is applied with a notched trowel to the wall in large drops in a checkerboard pattern. Then the panels are attached to it in turn, joining together. It should be noted that with this installation method, it will not be possible to install recessed luminaires.

With the help of panels, you can also create window slopes yourself. You can also make a whole panel on the wall or decorate an arch from PVC sheets. Various crafts will only transform the interior and make it even more interesting. The original painting of the panels will give originality to the room.

Examples in the interior

Numerous examples of room decoration allow you to quickly select the most suitable option. Today it is easy to find interesting options that fit both the Provence style and the loft style. Quite original design ideas can be realized using photo-printed panels.

The design of the hallway room with panels will be very interesting and bright. Moreover, you can choose bright PVC sheets with floral or abstract patterns that will look great against the background of wooden furniture. Panels with a picture, shaded with a not too catchy pattern, will also be an excellent option for a spacious corridor. In this case, it is best to give preference to bright and juicy shades to make the space seem lighter and more welcoming. For those who appreciate elegance and modesty, wood-like panels will become an indispensable option for decorating the hallway.

It is even easier to choose an interesting interior for a bathroom. Panels with a pattern for small mosaics or marble look ideal. They fill the bathroom space with a special charm. And you can give them a little pretentiousness due to the molding with golden and silver elements. Panels with 3D images of a marine theme can transform a familiar bathroom into a tropical oasis.

A kitchen area with cladding trims is able to look bright, practical and modern at the same time. For the main part of the walls (preferably the upper one), it is better to prefer a not too flashy color, but the smaller part can be revetted with panels with a bright pattern. In this case, the working part can be highlighted in a different color, conventionally dividing the kitchen into a zone. As for the choice of colors and shades, everything here is extremely individual.

Last updated: 27.01.2020 16:55:44

Expert: David Weinberg

* Review of the best according to the editorial site. On the selection criteria. This material is subjective and does not constitute advertising and does not serve as a purchase guide. Before buying, you need to consult with a specialist.

In recent years, more and more Russian homeowners prefer special panels for wall decoration. This building material allows you to revitalize the interior, carry out installation work yourself, save money during repairs. Today, there are products from different manufacturers on the domestic market. They differ in material, shape, price, etc. To choose the most suitable wall panels for a particular room, you should heed the recommendations of experts.

How to choose wall panels

1. Types of wall panels. Most often, buyers are faced with three types of wall panels. Rack products are produced in the form of strips 240-370 cm long, 12.5-30 cm wide, 8-12 mm thick. Such a finish is best suited for small spaces, the connection of individual elements occurs by means of spikes and grooves. Tiled panels are made in the form of squares measuring 30-98 cm. Such elements are fixed with glue or clamps. With their help, it is possible to create unique drawings. The largest are sheet panels. They reach overall dimensions from 1.22 to 2.44 m. It is best to use this finish in large rooms, installation takes place in the shortest possible time.
2. Base material... All decorative panels consist of a base and a cover. The most popular are PVC products. They are lightweight, affordable and moisture resistant. Fibreboard panels made on the basis of wood fiber sheets are considered to be convenient to use. The outer surface is covered with a decorative foil. MDF has become a popular material not only for making furniture, but also for decorating walls. A distinctive feature of this material is heat and sound resistance. Gypsum elements are considered one of the most environmentally friendly panels. They bring zest to the interior, while at an affordable price. Exclusive indoor design allows for cork. This material combines lightness and environmental friendliness, it keeps warm well and does not transmit sounds. Only in humid rooms, cork panels should not be installed.
3. Installation methods. When purchasing wall panels, it is important to consider how they are attached. If the base has a perfectly flat surface, then you can use a special adhesive or liquid nails. Mounting hardware is considered a reliable mounting option, but often requires a lathing device.

We have selected 13 of the best wall panel manufacturers for our review. Their products are widely represented in the Russian retail network; they received high marks from experts and positive feedback from users.

Which is better tile or wall panel

Cladding type	Advantages	disadvantages
Tile	Strength and durability Resistant to moisture and temperature extremes Sustainability Fire safety	High price Complex and time-consuming installation Simple design
Wall panel	Affordable price Rich assortment of patterns and textures Simple and quick installation	Low resistance to moisture (with rare exceptions) Limited service life Not all materials are sustainable

Rating of the best manufacturers of wall panels

Nomination	a place	manufacturer	rating
Best PVC Wall Panels	1		4.9
	2		4.8
	3		4.7
	4		4.6
	5		4.5
	6		4.4
	7		4.4
	8		4.4
Best MDF Wall Panels	1		4.8
Best gypsum wall panels	1		4.9
Best Cork Wall Panels	1		4.9
The best fiberboard wall panels	1		4.6
	2		4.5

Best PVC Wall Panels

PVC wall panels are widely used. Due to their moisture resistance, they can be used in all heated rooms, as well as in some buildings without heating. The experts highly appreciated the products of the following brands.

Forte

The leading European manufacturer of PVC wall panels is the Italian company Forte. For the high quality of products and a rich assortment, experts gave the brand first place in our rating. To achieve stable quality, the company was allowed by advanced equipment, strict selection of raw materials and strict control at every stage of the production chain. Domestic consumers can choose from two collections of finishing materials, where there are about 20 different colors. In addition to wall panels, the company produces accordion doors, as well as sliding curtains for showers and bathrooms.

Users praise the quality of the wall panels, a wide range of decors, and durability. The only disadvantages are the high price.

Advantages

• high quality;
• a wide range of colors;
• durability;
• stylish design.

disadvantages

• high price.

Venta

Since 1993 the Belgian company Venta has been working on the European market of building materials. The brand has become a leading manufacturer of PVC wall panels. The firm's clients include consumers not only from Europe, but also from the American continents and the countries of the former USSR. Since 2003, a branch of a Belgian company has been operating in the Moscow region, which is equipped with modern equipment and high-quality raw materials. Thanks to the location of the production site in our country, we managed to find the optimal combination of price and quality.

Russian consumers praise the products for their affordable prices and beautiful appearance. The brand failed to bypass the leader of the rating due to the fragility of thin panels. Therefore, the material must be cut with extreme care.

Advantages

• affordable price;
• easy installation;
• beautiful appearance;
• color retention over time.

disadvantages

• thin panels break easily.

Deceuninck

Another Belgian concern is in the top three of our ranking. The Deceuninck Group was founded in 1937, having won the trust and loyalty of consumers from different countries. Today the company has 14 production sites, 22 warehouses and 3,600 employees. In our country, the interests of the manufacturer are represented by a division of Deceuninck Rus Ltd. The experts highly appreciated the socially responsible approach to the production of PVC products. The brand is synonymous with sustainability, energy efficiency and innovation. In 2018, the products of the concern became a laureate in the "Energy Efficiency" category at the "Innovations in Construction" exhibition.

Those consumers who have purchased exterior finishing systems celebrate the beauty and functionality of the finishing. Users attribute the high price to the disadvantages of the product.

Advantages

• environmental friendliness;
• energy efficiency;
• beautiful appearance;
• ease of use.

disadvantages

• high price.

Vek PVC panels

The largest Russian manufacturer of PVC panels is Vek LLC. The company specializes in the production of interior decoration materials. Plastic is environmentally friendly, it does not emit toxic substances. The production chain uses German, Italian and Russian films, which have been certified and have the required qualities. To give an aesthetic appearance, imitation printing is used, and the uniqueness of the interior is ensured by author's developments.

Experts highly appreciated the two-layer varnish coating of the panels, which is resistant to mechanical stress. The users liked the affordable price, elegant appearance. But the fragility and persistent smell did not allow the brand to take a prize in the ranking.

Advantages

• affordable price;
• beautiful appearance;
• rich selection of colors and textures;
• ease of maintenance.

disadvantages

• significant were not found.

One of the most hi-tech enterprises in the world that produces PVC panels is the Chinese company Shanghai Zhuan. In the company's catalog you can find sandwich panels, blinds, aluminum products, etc. The Russian consumer is already well aware of PVC wall and ceiling panels, as well as accessories for them. Experts were surprised by the variety of colors, the rich range of standard sizes. In this way, the manufacturer tries to meet the requirements of any client. At the same time, the lineup is constantly being updated, today panels with a 3D image, with holographic paintings imitating mosaics, have appeared on the market.

Advantages

• high-tech production;
• spectacular design;
• constant updating of the lineup;
• acceptable price.

disadvantages

• the smell of plastic;
• inaccurate dimensions.

Green Line

In the Russian city of Kolchugino, the production of plastic panels under the Green Line trademark is located. The combination of many years of experience and modern equipment allows to create high quality products. The manufacturer uses only environmentally friendly raw materials from Europe and the USA that do not support combustion. Experts refer to the strengths of the panels as 100% moisture resistance, good sound insulation, and a wide range. With the help of UV printing technology, unique designs and logos can be applied to products.

Users praise the reliability and workmanship. There are complaints about the tonality of panels from the same series, it is not always possible to find the required dimensions.

Advantages

• environmental friendliness;
• moisture resistance;
• UV printing;
• affordable price.

disadvantages

• the tone of the panels from the same series is different;
• poor assortment of standard sizes.

Aquaton

The production company Aquaton has been working in the domestic construction market for more than 16 years. The company produces a wide range of PVC and fiberboard finishing materials. A plant in the Kursk region produces moisture-resistant panels, plastic products with an acrylic coating, 3D effect, etc. The manufacturer managed to achieve a combination of lightness and strength due to the PVC foaming technology. The presence of modern equipment allows you to accurately imitate stone, tiles or wood. To prevent the image from being washed off for many years, the surface is covered with a protective layer of waterproof varnish. Wall panels can be mounted using glue or staples (in the case of lathing).

Positive consumer reviews allowed the brand to be included in our rating.

Advantages

• rich assortment;
• ease;
• strength;
• affordable price.

disadvantages

• unpleasant odor;
• inaccurate dimensions.

Vivaldi

The history of the Vivaldi enterprise began 30 years ago, the first production site was built in Taiwan. In 2010, products with this trademark began to be produced in Russia. The experts included the brand in our rating for the unique design of textured films, fire safety and durability. Wall panels have a Russian certificate of conformity and meet strict hygienic requirements. The advantages of the Vivaldi finishing material include moisture resistance, versatility, ease of installation, and an affordable price.

Users are satisfied with the quality of panels, stylish appearance, ease of use. The disadvantages of the brand include a modest color palette, a small assortment of standard sizes, and the lack of additional items on sale.

Advantages

• versatility of installation;
• moisture resistance;
• durability;
• affordable price.

disadvantages

• few colors;
• small selection of standard sizes.

Best MDF Wall Panels

The area of \u200b\u200bapplication of MDF wall panels is limited to dry warm rooms. They can help make the room warmer and quieter. The specialists liked the products of one brand the most.

Aplast

A wide range of finishing materials is produced by the production and trading company Aplast. Domestic consumers are offered products made of PVC, MDF, HDF. The experts were especially interested in MDF wall panels. Decorative sheet materials feature precise imitations of wood, brick and masonry. The manufacturer managed to achieve this effect due to embossing. There are special overlays for connecting individual panels into a single composition. Interior MDF panels will help you decorate your kitchen in style. High-gloss kitchen aprons with embossed and shimmery effect are new to the brand.

Users are satisfied with the combination of quality and affordable prices, spectacular appearance, ease of installation and operation.

Advantages

• high-quality manufacturing;
• unique decor;
• affordable price;
• ease of care.

disadvantages

• low moisture resistance.

Best gypsum wall panels

The high popularity of plasterboard finishes has made gypsum-based wall panels in demand in our country. Durability and reliability are complemented by environmental friendliness, as noted by the experts.

Artpole

Artpole 3D panels have become a new extraordinary project in the world of design. The company focused on the production of gypsum wall coverings. They attract users with seamless connection, environmental friendliness and non-flammability. Today, the consumer is offered various design options, accessories are specially developed to order. High quality of products is ensured by strict control at every stage of production. The products were appreciated not only in our country, but also in Belarus, Kazakhstan and Ukraine. The brand is included in our rating for high-quality and stylish products, which are sold at affordable prices.

Since 1999, the Portuguese company Egen has been producing finishing materials. Cork wall panels are of particular interest to domestic consumers. But the assortment is not limited to one type of finishing materials, the company produces ceramic tiles and sanitary ware. Experts note the high level of quality that meets the requirements of international standards. Among the consumers there are serious companies from Central and Eastern Europe. The brand got into our rating not only for its excellent quality, but also for a wide selection of textures and colors.

Users praise Egen cork wall panels for their warm and cozy indoor atmosphere, unique design and environmental friendliness. The disadvantages include only the high price.

Advantages

• high-quality manufacturing;
• environmental friendliness;
• unique design;
• rich assortment of textures and colors.

disadvantages

• high price.

The best fiberboard wall panels

Low cost and ease of installation attract consumers' attention to fiberboard wall panels. The sheets can be attached directly to the base or to the crate. But experts do not recommend using them for wet rooms. Here are the best manufacturers in this segment.

DPI

The American DPI brand is well known all over the world. The manufacturer specializes in the production of fiberboard wall panels. The company managed to occupy a leading position in the domestic market due to its high consumer properties and affordable prices. The assortment includes panels with original interior solutions, which allows to carry out the most daring projects of designers. Thanks to a unique technology, the consumer is offered embossed surfaces like stone, imitation of brickwork and fibrous texture of wood. The experts gave the brand the first place in our rating.

DPI wall panels are praised by users for their beautiful design, high quality, practicality and reasonable price. Among the shortcomings mentioned is getting wet with prolonged contact with water.

Advantages

• original design;
• variety of textures and colors;
• practicality;
• quality workmanship.

disadvantages

• low moisture resistance.

The Skano concern sells decorative fiberboard panels under the Isotex brand on the domestic market. The manufacturer pays special attention to the safety of its products. Therefore, only natural raw materials are used in the production chain, which are combined into one whole using Finnish technology. Soft fibreboard, which is the basis of the decorative material, plays the role of heat and sound insulator. The surface of the panels is covered with washing wallpaper, they differ in a variety of colors and textures. Bonding is carried out using a water-soluble glue.

Advantages

• environmental friendliness;
• good thermal insulation;
• ease of care;
• affordable price.

disadvantages

• fragility.

Attention! This rating is subjective and does not constitute an advertisement and does not serve as a purchase guide. Before buying, you need to consult with a specialist.

Among modern finishing materials, plastic panels are very popular. And all this is because they are lightweight, hygienic, they are easily attached to walls made of any material, they are not afraid of moisture and are not subject to decay. Plastic panels made of polyvinyl chloride (PVC) are made by extrusion, which gives them the necessary strength and rigidity. In this article, we will define the main criteria for choosing this finishing material.

Today the industry produces a huge selection of plastic panels made in Turkey, China, Russia and Ukraine, differing in appearance, color, degree of gloss and other characteristics. In any hardware store, eyes run up from their abundance and variety, confusion sets in: so which panels to choose?

All panels are conventionally divided into ceiling and wall panels. There is no direct prohibition on the use of wall panels on the ceiling, and ceiling panels on the walls, but an easy finger pressure test unambiguously interprets that, having low strength, these panels cannot be used for wall cladding.

An additional distinctive element is the length. Typically, ceiling panels are 6 or 12 m long, while wall panels are shorter at 2.7, 3 and 6 m.

The thickness of ceiling panels is gradually decreasing by manufacturers, before it was 8mm, then it became 7mm, nowadays there are 5 and even 4mm, and wall panels are usually produced with a thickness of at least 10mm.

Many buyers consider the cheapest panels, but they do not want to pay attention to the fact that a quality product cannot be cheap.

After all, the vast majority of Chinese plastic panels are made from low-grade raw materials, bad adhesives and varnishes. In the future, they will quickly lose their appearance and, most importantly, they will begin to release toxic substances, even the option of provoking an allergic reaction of the human body is not excluded.

So, panels should be purchased thoughtfully, comprehensively considering and paying attention to the following factors. The main types of plastic panels are:

1. Plastic lining - used in the decoration of walls and ceilings, use special fastening brackets for fastening. Embossed panels are often called clapboard, because they create an imitation of a wooden panel "clapboard".
2. Plastic panels for tiles. It is advisable to use square tiles with a width of 30 to 98 cm.
3. Sheet panels - resemble plywood. Their main difference is in installation - fastening is done with glue or nails. The joints are sealed with a sealant or sutured with strips of the structure and color of the panels

From the point of view of the design of the premises, it should be emphasized that the sale has a varied color palette of panels that allows you to satisfy any desire of the buyer.

All panels are conventionally divided into glossy, matte and semi-glossy.

Their technical characteristics are the same, and the difference is solely in the surface layer. This is achieved by using varnish, which creates a layer of protective film on the front surface.

When choosing plastic panels, you must carefully study the following parameters:

1. Thickness of the face - large thickness has significant strength.

2. The number of stiffeners - the more, the stronger the panel. The external state of the stiffeners must be identical without visible deformations. A quality panel has more weight, which corresponds to its thickness and the number of stiffeners.

3. The outer surface must be uniformly painted, and viewing the stiffeners is not permissible. It is easy to check the quality of the panels - just press it down with a deflection of up to 50% and see the result. There are no dents in high-quality panels, mainly due to the low chalk content.

4. The panels must fit tightly and rigidly into the groove. The type of joint in panels is seamless and embossed. The most widespread at present is seamless, but it should be called conditionally seamless, because even with the highest quality installation, the joint is still visible.

Poor manufacturing or improper storage and transportation of plastic lead to inevitable deformation and, as a result, to the impossibility of perfect joining of its parts.

Characteristic advantages and disadvantages of plastic panels

Like any material, plastic panels have their own advantages and disadvantages. Let's start with the pros.

According to the manufacturers, all plastic panels are environmentally friendly, do not burn, have sound insulation properties, light weight, good moisture resistance, durability, easy to clean and, moreover, are inexpensive.

The disadvantages of plastic panels are as follows:

low strength, scratches, dents and chips remain on the surface (one strong enough blow or strong pressure leads to a crack);
panels have a limited scope;
initially there is a specific smell;
being a versatile material, plastic panels are usually used for interior decoration.

Installation of plastic panels

can be performed both horizontally and vertically and even at any angle.

They find their application in the decoration of loggias and balconies, and are also often used as a ceiling material in the bathroom, corridor and kitchen.

Sewing the walls with plastic is extremely simple, therefore, it is done without problems with your own hands.

a) Initially, it is necessary to bring the temperature of the plastic panels closer to the room temperature - if brought from the cold, then let them adapt.

c) Walls with a high-quality dry surface must be sanded, in this case the glue will fit perfectly, therefore, the panels will last a long time.

d) Cutting the panels is easy, using a hand saw for wood or metal.

e) For a good appearance, the panels must be cut and drilled on the front surface.

f) But it is necessary to remove the protective film from the plastic panels at the last stage, as it protects the panel surface from cuts and scratches.

Finally, a video on the topic from Roman ...

Was this article helpful? Subscribe to site updates to receive the latest articles on renovation and interior design before anyone else!