I bought a house with what to paint the walls of the lining. Painting the lining inside the house in different colors: original ideas

It would seem that it is an ordinary wooden lining - is it possible to find a finishing material simpler and more affordable? But if you approach the finishing issues correctly and creatively, then you can create truly unique interior combinations. Today we'll talk about how you can paint the lining inside the house.

After applying the protective layer, you can proceed directly to the finishing. The lining inside the house is painted with various decorative means:

oil or acrylate paints;
decorative glaze;
stains or alkyd varnishes;
acrylic scuba diving;
opaque enamel.

This is not a complete list, but only the most common remedies. They vary in cost, in terms of environmental friendliness and, of course, in their decorative properties. So, painting with oil paint will preserve wood for a long time, give it excellent water-repellent properties. But such a coating has a pungent odor until it dries completely, and requires renewal about 1 time in 5 years.

If you paint the lining inside the house with glaze, you can successfully emphasize the texture of the wood, and if you add a little color to the solution, you will give your walls any shade you like.

A similar effect is obtained by coating with water-based acrylic varnish - the material is transparent, perfectly emphasizes the natural pattern of the tree, and can be used with the addition of a colored pigment. True, this type of coating is not applicable to the floor, due to its rapid wear.

Another option is varnish. But there is one condition in working with such a material - it is possible to apply varnish correctly only on a completely dry surface of the tree, otherwise it will crack during the drying process.

If you are a supporter of wood staining, you, of course, know that such a tool can only change the shade, but not paint over the wood. To make the walls look attractive, the stained lining must be perfectly flat, without noticeable flaws.

Painting stages

Before starting work, you should stock up on everything you need: prepare rollers and brushes, arm yourself with a paint bath, gloves and goggles. The painting procedure includes the following steps:

Cleaning the treated surface from dirt and dust, and possibly - from the remnants of the old decorative coating.
Degreasing wood (with an alkaline detergent) for better adhesion of the compound to the surface.
Sanding or leveling wood with a regular pumice stone;
A primer or antiseptic can now be applied for extra protection and better effect.
Directly painting with decorative material or varnish. The selected tool is applied in three layers, trying not to paint over the same area several times, and to give the lining the opportunity to dry completely between approaches.

Tricks for coloring

in the process of work, try to mix the coloring solution more often - then the color of the coating will be as uniform as possible;
do not work on a hot sunny day - then the coating may dry out too quickly;
using a primer, you can add to it the color that was chosen for the final finish, this will have a beneficial effect on the uniformity of the color of the walls.

Ideas for using lining in the interior

The misconception that wall clapboard decoration is applicable only in a country house is quite common. However, more and more modern interiors are debunking this statement: there are a lot of ideas on how to combine wood lining with decorative plaster, wallpaper, and even use it in a high-tech interior. For example, if you lay the cladding board vertically, you can make the ceiling visually higher, and the horizontal installation allows you to "move" the walls.

That's all the tricks for painting wooden walls indoors. Please note that if you are interested in how to paint the lining outside the house, you should not use these materials. For outdoor work, more sustainable means are used, which we will talk about next time.

The irrefutable advantages of wood made it one of the most popular finishing materials even in the era of "construction paradise", when every craftsman can choose a material for every taste. It is due to the low thermal conductivity and other positive qualities, such as ease of fastening, the ability to hide surface defects, as well as environmental safety, that wooden Euro lining has been provided with stable popularity for a long time. The lining is a thin finishing panel made of selected wood, intended for interior and exterior decoration of premises and performing several functions, among which a special place is given to cosmetic, decorative and soundproofing. Despite the fact that there are several types of lining - wooden and plastic, experienced specialists prefer the first option, in view of its significant advantages. In most cases, clapboard is sheathed on the outside of the house, as well as verandas, loggias and balconies. After finishing the walls with clapboard, which hides their irregularities and other imperfections, they acquire an aesthetically pleasing appearance. The use of wooden lining contributes to the even distribution of moisture and the preservation of heat in the room, which, after finishing with this material, is filled with a pleasant woody smell. The ideal option for interior decoration is pine, which nature has endowed with a pleasant golden hue that darkens over time. Despite the fact that, in theory, the lining is a durable material, like any other, proper care is necessary, which will extend its service life. The main component of proper care is painting the lining, which will protect the material from drying out, dust and damage by insects, as well as from changes in temperature and humidity. In connection with the relevance of this question, in this article we will answer the question: "How and with what to paint the lining inside the house?"

Painting the lining: the relevance of the issue

We can talk for a long time about the advantages of wood as a finishing material. It is characterized by the ability to heat and sound insulation, and the ability to visually hide the irregularities of the finished surface, and ease of installation, and, of course, durability. Thus, lining is characterized by all the advantages inherent in wood. However, wood also has its own disadvantages, such as a tendency to fire, rot, as well as susceptibility to damage by insects and fungi. In this regard, despite the fact that the lining is a durable material, over time it loses its original characteristics. To avoid this, wood finishing materials must be properly maintained, one of the stages of which is painting the wooden lining.

Important! Painting the lining is the final stage of finishing activities, however, it, as well as the implementation of other stages, must be approached with due responsibility. The selection of the most effective paint and varnish composition determines the service life of the lining and its ability to maintain its original performance characteristics.

Lining photo

How to paint the lining: the choice of paint and varnish composition

The lining, which was used for cladding the facades of buildings, is most susceptible to destruction and aging. This is due to the fact that it is constantly influenced by negative environmental factors, such as microorganisms present in the environment and causing wood to rot, ultraviolet radiation, as well as sudden changes in temperature and humidity, leading to the growth of mold. In this regard, for exterior decoration, experts recommend using lining made of coniferous wood, which contains resin that has antiseptic properties and prevents the development of mold and mildew. However, it also needs to be treated with special formulations to extend its performance. For processing wooden lining, functional and decorative compositions are used. The first group includes:

Fire retardants- functional compounds used to reduce the flammability of the material. Due to the fact that wooden lining is a fire hazardous material, processing with fire retardants is a mandatory measure;

Important! According to experts, the most effective is the industrial treatment of wooden lining with fire retardants, which involves the application of a protective composition under high pressure. Do-it-yourself application of fire retardants is considered a less effective measure.

Bactericidal and antiseptic compositions penetrating into the structure of wood to a depth of several millimeters and preventing its destruction under the influence of aggressive environmental factors such as ultraviolet radiation, precipitation, mold and rot. For processing wooden lining inside the house, compositions are used on which their purpose for internal work is indicated;
Drying oil- a composition that provides reliable protection of wood from decay, as well as giving it water-repellent characteristics. However, the disadvantages of drying oil, such as an unpleasant odor and a long drying time for each layer, significantly limit its use;
Acrylic varnishes- paints and varnishes that have not only functional, but also decorative characteristics. They are used for finishing the lining and are applied in two steps: the first layer involves the application of a transparent varnish, and the second is a varnish with the addition of a colourant. Choosing a water-based acrylic varnish is ideal for those who want to preserve the original texture of the material;

Yacht varnish forms a reliable and durable coating of wooden lining, which protects the material from moisture, mold and mildew, as well as ultraviolet radiation. Due to the presence of solvents in the varnish, it is characterized by an unpleasant, but quickly weathered odor. Distinguish between matt, semi-matt and glossy varnishes. The disadvantage of yacht varnish is its high cost, but it fully corresponds to the quality of the composition. In this regard, painting the lining with varnish can be significantly limited;
Synthetic varnishes- unlike water-based acrylic varnishes, they are more toxic, however, during application, they provide the lining with a rich shine and a smooth surface. Due to the fact that the composition of synthetic varnishes includes xylene and toluene, it can only be used for outdoor work;
An advantageous alternative to varnishes is considered wax-based formulations, providing the lining with a semi-matt shine. However, the limiting point in its use is the complexity of the application.

If the first group of funds is focused on protecting the lining from operational factors and extending the terms of its use, then the use of the second group - decorative compositions is relevant if you plan to radically change the design of the room.

Decorative compositions for painting lining:

Oil paints, deeply penetrating into the structure of wood and effectively increasing its resistance to negative environmental influences, including moisture. However, they are characterized by a fairly long drying time, as well as a gradual loss of color during use. In addition, the peculiarities of the composition of oil paints contribute to the fact that the air permeability of wood is reduced, and therefore, they can be used only for painting individual elements inside the room;
Acrylate paints their performance characteristics are superior to oil compositions, which guarantees a greater preservation of color and gloss of wooden lining. They are characterized by high elasticity, and therefore, they do not crack even with significant temperature changes and deformations, and painting the lining with paint can be used for both external and internal work;
Alkyd based enamels allows you to paint the lining in a wide color range both inside and outside the room. After painting a wooden lining with alkyd-based enamel, a glossy surface forms on the surface of the material, which can fade over time, which leads to the need for re-painting;
Water-based paints do not hide the texture of wood, giving it a matte finish. They are characterized by the absence of an unpleasant odor and a quick drying time, but they are inferior in reliability to varnishes. The construction market offers a wide variety of water-based paints and varnishes, among which there are facade, waterproof, washable, and also enamels intended for interior work.

Important! For painting wooden lining in a bath or sauna, professionals recommend choosing special impregnations or varnishes that reliably protect the decorative coating from moisture and dirt, and also do not emit harmful volatile components when heated.

Lining painting technology: step by step instructions

Regardless of what paint you choose, painting a house, in which the lining is the main finishing material, requires adherence to the technology of applying paint for the lining. Preparatory measures play an important role in this process.

What are the preparatory measures: preparing the lining for painting

First of all, you need to clean the lining of old paint. If the layer of paint and varnish material is held firmly enough, the painted lining must be cleaned with a 2% solution of soda, which will help to effectively remove the layer of old paint. If fragments of paint still remain on the surface of the lining, they can not be removed, since they make it possible to give the lining a new, original texture;
After cleaning the lining, it is necessary to grind it, for which it is recommended to use not a specialized grinder, but traditional sandpaper or even pumice;
After grinding, treat the lining with linseed oil;

Important! To improve the result of processing the lining with linseed oil, add 50 grams of turpentine and dry pigment to its composition, which can be red lead or ocher;

The final stage of the preparatory activities is a primer, for which primers are used for wood or compounds that will be used for further painting.

Important! Experts recommend replacing the traditional primer with a primer antiseptic, which will increase the protective characteristics of the treated wooden lining to a greater extent. Despite the fact that this preparatory stage is not mandatory, experienced experts do not recommend neglecting it, explaining by the fact that certain types of wood in the area of sawn knots have specific formations - "resin pockets", from which resin is released from time to time, reducing protective properties of paint or antiseptic. Currently, manufacturers offer many varieties of primers: both for outdoor and indoor use, as well as specialized antifungal and anti-mold primers that significantly extend the life of paint and varnish coatings.

Lining painting technology

Painting the lining, the video instruction to which is attached below, is a process that is not difficult and can be carried out even by a beginner. But, despite this, experts recommend following some tips, which can also be found in this article.
The paint must be applied in a thin layer, making continuous movements along the wooden panel. It is important that in the process of painting the lining, only the tips of the brush bristles pass along its surface, but not its base;
Even if the paint or varnish does not completely cover the surface of the lining, it is not recommended to apply too thick a layer of the paint and varnish composition, since several thin layers will provide a more durable coating than one thick layer;
To effectively paint over the lining in hard-to-reach places, as well as in the area of baseboards and platbands, experts recommend using a thinner brush, the diameter of which does not exceed 5 cm;
The next tip will allow you to avoid the appearance of marks on the surface of the newly painted lining. To do this, the finishing layer of paint must be applied from top to bottom, which will make it possible to smooth out the surface of the freshly painted lining as efficiently as possible.

Important! In the process of painting vertical surfaces, for the decoration of which wooden lining was used, a layer of paint must be applied continuously. At the same time, it is not recommended to paint over the same place more than two or three times, as this will lead to the fact that the painted surface will not be strong enough and will acquire a sloppy appearance. In addition, after applying each layer, you must wait for it to dry, and then proceed with the application of the next layer of paint.

To improve the quality of the painting performed, follow the advice of our specialists.
Before painting, as well as in the process of carrying out work, it is necessary to thoroughly mix the paint, which will allow achieving uniformity of color and gloss;
To make sure that the color is correct, make a test painting, which involves applying paint to a small area of an unused board;
To avoid color irregularities and shine, experts do not recommend applying too thick a layer of paints and varnishes, replacing it with several thinner layers;
The following fact may seem surprising to someone, but sometimes, during the dyeing of the lining, tsigey mittens may be required. Experts explain this by the fact that sometimes wooden lining can alternate with metal pipes and other metal elements that are difficult enough to paint, which is explained by the fact that one side is on the ground. To facilitate the dyeing process, it is enough to turn the tsigay mitt with its fur outward, put it on the hand and, dipping it into the paint, use it instead of a brush. This method significantly speeds up the painting process and allows you to paint up to 5 meters of pipe in 1 minute;
Experts recommend to tint the primer in a color that best matches the color of the subsequently used paintwork;
It is not recommended to carry out paints and varnishes in sunny weather or under the influence of direct sunlight, which can excessively accelerate the drying time of the paint and varnish material. To avoid this, do not carry out such activities in hot sunny weather, as well as on days of precipitation. The most optimal weather for carrying out paint and varnish events is warm, cloudy and calm weather;

The weakest point in this case is the ends of the boards, through which water is absorbed at the fastest rate, causing damage to the wood. This leads to the most careful approach to their processing, including the application of several layers of primer and paintwork materials;
An interesting fact is that in the process of re-painting the facade of the building (if there are no gross structural defects on it), you can use the same or a different shade. However, it is important to observe the rule according to which it is necessary to use the same paint and varnish material that was used earlier.
Determination of the types of paintwork can be done visually. For example, acrylate paint typically cracks along the grain and has a leathery surface. At the same time, it can be torn off and even rolled up into a tube, which will not affect its integrity in any way. As for the antiseptic, it is characterized by a glossy surface. A surface previously painted with an antiseptic can be painted with it, or with oil paints.

Separate tips for choosing paints and varnishes:

Due to the fact that during the drying process the oil paints change their color somewhat, in the process of choosing the tone of the paint and varnish composition, give preference to the darker one;
As for acrylic paints, they do not change their color during work and do not crack;
Water-based paints are environmentally friendly, but more expensive materials. Having given preference to them, you will be surprised at the vastness of the choice of the color palette;
Using aqualak, pre-paint the lining with water-repellent and anti-slip compounds, and also treat the lining with an antiseptic and impregnation, which will increase the fire safety of the treated wood;
If you are a family member with allergies, give preference to scuba diving, which is the safest material;
If you use lining made from valuable wood species and want to emphasize its texture and naturalness, give preference to transparent polyurethane varnishes;
To paint the wooden lining in the dressing room, use urethane-alkyd varnish or antiseptic paint, the service life of which exceeds a decade. They will reliably protect wood from rot, mold and mildew, as well as increase its water and dirt-repellent characteristics.
Due to the fact that oil paints reduce the air permeability of wood, to create an optimal microclimate in the room, use a primer and acrylic aqualak, which will reliably protect the wood from dirt and dust and emphasize its natural beauty.
Also remember that after applying varnish, a translucent film forms on the surface of the lining, the paint contributes to the formation of a strong film, and impregnations are not visible at all on the surface of the wood.

How to paint the lining: the choice of color scheme

Regarding the question: "What color should I paint the lining?" , then we can safely say that there is no single answer to it, and the choice of colors depends only on your preferences.

But, despite this, at one stage or another of the design development, certain trends dominate, and at the moment they are in the "leadership" of white, which contributes not only to the visual expansion of the internal space, but also to increase the mood of the residents.

Painting with a roller

Often, lovers of natural home decoration have to figure out in detail how to paint the lining inside the house. Such a procedure, in fact, is mandatory, and it is necessary for several reasons. First of all, thanks to the varnish-and-paint coating of wooden panels, their service life can be extended. In addition, well-chosen paint will preserve not only the texture, but also the appearance of the wood from which the lining is made.

Coating options for lining

Modern sellers of paints and varnishes are ready to offer their customers a large selection of different impregnation options. Between themselves, these compositions differ, depending on the purpose for which they are intended.

Use of fire retardants... These substances can significantly reduce the level of fire hazard of the processed material. Accordingly, treatment with a fire retardant compound is a prerequisite for extending the life of the lining, as well as for ensuring safety.

It is important! It is customary to apply a fire retardant under special pressure, respectively, it is desirable that such a composition be applied at an industrial level. Only this will allow you to get a more thorough effect than if you apply a paint that reduces flammability with your own hands.

Compositions from bacteria... With the help of such impregnations, it is possible to protect the lining from various kinds of decay, infection, as well as from damage by fungi and bacteria. At the same time, it should be noted that for the processing of internal walls, coatings with a special mark are required. This will allow you to choose a harmless option that is executed;
Acrylic varnishes water-based. Their use is suitable for finishing the lining when it comes to covering the interior of the house. With acrylic, you can achieve not only a purely aesthetic effect, but also protect wood panels from external influences.

Apply acrylic varnish in two steps:

Step 1- applying a transparent base, which is a prerequisite if you are looking for how and what is the best way to paint the lining inside the house;
Step 2- direct shading, this is possible if you use a special tinting mixture. Here you can choose absolutely any shade, depending on your preferences.

Synthetic based varnishes... They are more toxic than acrylic varnishes, which are based on water. However, using synthetics, you can achieve the smoothest surface and shine, since they contain certain substances. Among them are toluene as well as xylene. The presence of these substances in the composition of impregnations of this type allows them to be used exclusively for outdoor work, in view of the too high toxicity and harmfulness for the residents of the house;

Wax formulations... These lining materials are an excellent substitute for varnish. With their help, not only the semi-matt gloss characteristic only for them is provided, but also excellent protection of wooden panels. However, it will be difficult for a layman to apply this composition, it is advisable that only an experienced master does this.

Coverings for decorative function

Compositions for covering wooden panels indicated in the previous paragraph have one undeniable function in common - they serve, first of all, in order to extend the life of the material, to protect it from any influences.

In the event that for you in the first place is still the design of the room by means of it or changing the existing design, then you will have to figure out the best way to paint the lining inside the house again.

Among the various compositions for decorative processing of wood panels are distinguished:

Oil paints... They are distinguished by excellent resistance to all external influences, even when it comes to moisture. In addition, the paint perfectly penetrates the wood structure, but dries very slowly. Most oil paints have a tendency to lose color over time after application, which leads to the need for constant renewal;
Acrylic based paints... This option is much better than a simple oil one, since it will allow you to keep the color much longer, while maintaining the shine. They are not afraid of temperature jumps, since they are characterized by increased elasticity. Nevertheless, this type of paint has a certain drawback - it is the price.

It is he who determines the frequent choice of many homeowners in favor of simple oil coatings;

Lining painting process

You should proceed directly to the painting process only if the primer is completely dry. A special video can help with the staining technology, which will not only simplify the process, but also not forget about the following features:

Do not move the base of the brush over the surface of the lining, use only the tips of the brush;
If a thin layer does not cover, in your opinion, the entire surface of the lining, you should not make it thicker. It is much better to apply several thin layers, since this is the only way you can ensure yourself a durable coating that will be durable;

An increasing number of homeowners are choosing a natural material - wood when choosing a finishing coating for interior walls. This choice is not surprising, because wood combines many useful properties: environmental friendliness, health benefits, beautiful appearance. Added to these qualities are excellent performance characteristics: low weight, good sound and heat insulation. The simplest and most affordable wood finishing material is considered to be a lining, a thin sheathing panel with a thorn-groove connection. Painting the lining inside the house is a necessary stage in the finishing of housing, which allows you to give the interior a complete look and solve several additional tasks.

Lining in the interior: stylish living room of a country house

About the need to process the lining

Many people sincerely believe that the walls sheathed with wood panels are beautiful in their natural appearance and do not need additional processing. Knowledgeable people have several valid objections to this; they indicate the need to protect cladded walls from the following factors:

Ultraviolet actions... If sunlight regularly falls on a wall covered with clapboard, over time the wood darkens, and the walls in the room begin to look different.

Color changes... If the ventilation system in the house is unimportant, the air begins to stagnate. In places of high humidity, microorganisms develop and the wooden lining may turn blue.

Damage to the structure... In a room with excessive moisture in the wood, insect pests can easily start, mold settles; this causes rotting and destruction of the finishing layer.

Mechanical damage... A layer of paintwork will absorb scratches and bumps and will not spoil the beauty of the walls.

From the fire... It is considered prudent and prudent to protect wooden surfaces from the rapid spread of flame.

Unprotected lining is an easy target for destructive factors

Sometimes the owners plan to change the interior. The lining is easy to update - there are dozens of coating options and hundreds of shades that allow you to make familiar rooms unrecognizable.

There is no definite answer to the question of how to paint wooden panels inside a country house. The choice is determined by the goals - whether the owners only want to protect wooden walls, refresh tarnished surfaces or radically change the color. Materials suitable for processing the lining can be conditionally divided into two types: protective and decorative.

Protective compounds

There are many ways to protect a wooden surface from the destructive effects of external factors. Some of the means that can protect the panel covering include the following substances:

Fire retardants... This group of formulations is recommended for use in rooms with wooden walls or coatings. Fire retardant impregnation is not capable of stopping combustion, but it can significantly delay the spread of fire. This time will be enough to leave the premises and call the firefighters, and, perhaps, independently cope with the source of fire.

Painted lining is protected from the effects of solar ultraviolet radiation

Fire retardants practically do not change the appearance of the wooden surface, and during operation they do not emit harmful substances.

Antiseptics... Agents with bactericidal properties are used in the fight against biohazards - they are used as a preventive measure, but they are also effective if the fungus infection has already begun. The disadvantage of antiseptic treatment is that it must be repeated periodically, since the formulations tend to evaporate. Recently, complex impregnations have appeared, which not only cope with mold and wood-boring beetles, but also perform the functions of varnish and stain. Such antiseptics "three in one" create a film on the surface, are more expensive, but additionally protect the lining from moisture and give it a spectacular look.

Processing lining with stain

Linseed oil... It is used both for the manufacture of quick-drying varnishes and varnishes, and as an independent impregnation with valuable qualities. Oil is a natural agent that makes the lining water-repellent and insensitive to microorganisms. Oil penetrates deep into the material without creating a film on the surface and allowing the wood to breathe. A surface impregnated with linseed oil reveals its texture more clearly and takes on a light shade. Linseed oil impregnation, although relatively inexpensive, will cost more than stain or varnish.

Drying oil... There are natural, synthetic and combined drying oils. Every year they are used less and less - not the most attractive set of qualities affects: over time, the surface impregnated with linseed oil turns yellow and becomes sticky.

Primer... Before using varnish or paint, the wooden surface is treated with a primer. Such a base protects the wood from moisture and reduces the consumption of paints and varnishes. The decorative layer is smoother and more attractive in appearance.

The use of a primer improves the quality of the base coat

On our website you can find contacts of construction companies that offer the service of finishing and insulation of houses. You can communicate directly with representatives by visiting the Low-Rise Country exhibition of houses.

Bleaches... A group of products that allow you to get rid of stains of various nature that appear on a wooden surface. Bleach is applied to the problem area and then washed off with water.

Lucky... The varnish has not only protective, but also decorative functions, which is why it is often chosen for processing walls and ceilings from lining. Acrylic varnish is considered one of the best options for indoor use. Usually it is applied in two layers - the first is transparent, and the second can be tinted. Water-based varnish (aqualac) can create different effects - the walls after its application become glossy, matte or semi-matte. Aqualak creates a vapor-permeable film on the lining, often with protection from ultraviolet radiation and microorganisms.

Wax... Wax mixtures are a classic remedy with effective protection. They give wood a semi-matt sheen and serve as a good alternative to varnishes. Manufacturers offer hard wax (warmed up before work), as well as liquid and water-based (ready-to-use). The wax composition is difficult to distribute evenly, but preliminary application of the primer makes this process much easier.

Wax-polished lining is always in fashion

Decorative (covering) means

The means that make the color and texture of wood trim invisible are considered decorative. Sometimes they are used to hide a wooden surface that has darkened from time to time. Decorative options for painting the lining inside the house are of a pleasant variety; these include the following types of paints and varnishes:

Oil paint... An old, tried and tested way to protect and refresh a wall is to coat it with oil paint, which creates a tight, moisture-proof layer. The downside is the long drying time of the paint and its pungent smell. Because of this, the work is recommended to be performed in the warm season, when the walls are dry and the smell will disappear as quickly as possible.

Acrylic (acrylate) paint... In many ways, it is a better quality, easy-to-work material than oil based paint. It does not lose color and shine, creates a waterproof elastic film on the surface, which does not violate the integrity during temperature fluctuations. The paint is easy to use - it dries quickly and wears out.

Lining, covered with acrylic paint, in the interior of the living room

Having stopped your choice on painting the lining inside the house with acrylic paint, it will be correct to use it to decorate the walls in the bedroom and nursery - it is absolutely harmless. The only thing that spoils the impression of acrylic paint is its high price.

Acrylic scuba... An eco-friendly product that is gaining popularity can simultaneously decorate and protect the walls of the lining. The product has a high degree of protection against microorganisms, does not have an unpleasant odor after drying, when applied, it lays down evenly, without traces and streaks. Painting the lining inside the house with acrylic aqualak has its own separate plus - a wide palette of colors that allows you to create an original interior.

Alkyd varnish... This type of paints and varnishes is used mainly in rooms that need regular wet cleaning (kitchen, hallway, living room). The colored varnish is abrasion resistant, the colorless varnish is also resistant to water. Minus: alkyd varnishes take a long time to dry and are expensive.

Decorative glaze... It is used as an independent decorative composition. Can be transparent or colored; in both cases, it favorably emphasizes the texture of wood panels and protects them from moisture.

Video description

On the protection of wood panels in the following video:

Opaque enamel... It is beneficial to use it if it is necessary to hide defects on the lining; the layer is dense and solid.

Painting: features and nuances

Having chosen how to paint the wooden lining inside the house, they begin the painting process. In order for the result to be of high quality and delight the owners for many years, the following preparatory work must be performed:

Stock up on a tool... You will need paint brushes and a tray, your chosen paint material, a roller with replaceable nozzles, a bucket, fine sandpaper and protective gloves.

Clean the surface... The lining is cleaned of dust, dirt, old coating with a stiff brush or pumice stone, then treated with sandpaper.

Degrease wood... Treating the surface with an alkaline detergent will improve the adhesion (adhesion) of the paint to the wood.

Carry out grinding... You can level the surface with pumice stone, sandpaper or a sanding mesh. Defects are pre-filled with a putty, the resin is removed with a solvent.

Minimum set for painting wood panels

Pre-process the lining... A primer is applied, after it dries - an antiseptic impregnation. The process can be accelerated by purchasing a combined composition that combines both funds.

Paint the walls... After waiting for the primer and antiseptic to dry, start painting. The paint for the lining inside the house is applied in two or three layers. The number of layers depends on the selected material and is indicated in the instructions. It is possible to paint wooden panels with high quality before they are installed on the walls, but this is not always possible (a large awning or canopy is required for the procedure).

Video description

About painting the lining in different colors in the following video:

Some of the subtleties of the workflow will help to improve the quality of the painting. When processing wood panels, the following points are taken into account:

Reduce the cost of painting the use of paints and varnishes with a complex action will help. Tinted varnish or oil-wax is more expensive, but the effect of its use will be higher.

Pre-impregnation lining should be produced from all sides, this will greatly enhance the protective effect.

When working with oil paint its tendency to discoloration (fading) should be taken into account. So that over time the color change does not catch the eye and does not spoil the interior, it is worth choose darker, more saturated shades.

It is better not to paint on a hot day., as the coating will dry too quickly and lay down unevenly (stains of different saturation may remain).

To make the cover work uniform in color, the mixture during operation is necessary stir periodically.

The coating is applied along the fibers of the lining

To the color of the walls was uniform, the color of the finishing material (paint) can be added to the primer.

When choosing a paint composition take into account the total costs: not only its cost, but also the recommended number of coats, as well as paint consumption per 1 m².

The choice of color for painting the lining

The clapboard walls are the background for creating the interior of a country house, so the choice of a suitable shade is no less important than the choice of the optimal paint and varnish composition. So that the choice of color for wood panels does not violate the harmony of design, they are guided by the following rules:

For the walls, choose a shade that is different no more than a few tones from the color of the ceiling and floor. Contrasting transitions will harm the overall style (only if the interior is not sustained in any of the avant-garde styles).

White color- the classic way to expand the space and make it brighter. It adds elegance to the interior, goes well with other shades and hides surface defects well.

Warm colors are welcome in the bedroom design

In the design living room and kitchen on the walls, finished with clapboard, look best light and warm shades: cream, peach, brown.

Nursery interior allows the use bright colors(for which high-quality and safe acrylate paints are ideal). IN bedroom walls, sheathed with wooden panels, try to cover with varnish in natural shades or calm colors - lilac, beige, honey. For wall decoration cabinet gray-blue or brown-green gamut will do.

Conclusion

Walls lined with clapboard are an effective and practical way of interior decoration of a country house. For the coating to be durable, careful preliminary preparation of the wooden panels is necessary. Qualitatively processed and painted lining will emphasize the interior design and save you from too frequent repairs.

The lining has long been used for finishing all kinds of surfaces outside and inside the premises. This cladding method is quite reliable and simple, as well as versatile, because the material can be used in the area of ceilings, verandas, doors and loggias. Wood is so popular with the modern consumer for the reason that it is environmentally friendly, with its help you can create a comfortable and warm microclimate, and its appearance allows you to get a feeling of closeness to nature.

The need for staining

Over time, the surface of this finish may lose its appearance, which occurs due to changes in moisture and temperatures, as well as other negative factors. Therefore, she needs protective measures. If you paint the lining, it will save it from drying out, exposure to insects and damage, and extend the service life. Among other things, the painted surface can be subject to wet cleaning, which excludes the penetration of water and dirt.

Many owners of houses and apartments ask themselves not only about how to paint the lining inside the house in the country, but also decide for themselves whether it is worth doing such work at all. Without staining, the wood will darken rather quickly, it will have to be restored.

The choice of material for staining

If you are faced with the question of how to paint the lining inside the house in the country, you may prefer a material that belongs to one of the two existing groups. Compositions can be decorative or protective, in the latter case, you can choose impregnations and primers that are able to protect wood from insects, the emergence and development of fungus, rotting and drying out. If you prefer decorative means of protection, then you can choose acrylic or oil paint, decorative glaze or aqualac, stain or opaque enamel. This list is not complete, since there are many different products among paints and varnishes, each of which differs in cost, manufacturer, service life, decorative properties and environmental friendliness. If you are faced with the task of how to paint the lining inside the house in the country, then you may, for example, prefer a hypoallergenic varnish, which also has decorative qualities. As a result, it will be possible to obtain a glossy or matte surface.

When to choose oil paint

Thinking about how to paint the lining inside the house in the country in white, you can choose oil paint. These compositions are able to last long enough, they dry quickly, and in the process of use they are able to repel moisture. But you must be prepared for the fact that during carrying these mixtures give off a persistent odor, as well as during drying. Therefore, staining with oil compositions must be carried out on warm days, when it is possible to ventilate the room. After 5 years, such a surface will begin to lose its original shine, which will indicate the need to renew the coating.

Is it worth buying acrylate paint

If you still cannot decide how to paint the lining inside the house in the country, then you can buy one that has a higher cost compared to the one described above. You can apply this composition at any time of the year. The high cost will be offset by the lack of odor and the ability to apply at different temperatures.

Decorative glaze or acrylic scuba

The decorative glaze perfectly emphasizes the texture of natural wood, as it has a transparent structure. If there is a desire to give this composition a certain shade, then all kinds of colors can be added to its ingredients. Acrylic scuba dye retains its texture just as well, but it cannot be used for painting surfaces that will be exposed to intense stress.

Alkyd varnishes, stains or opaque enamels

Quite often, people ask experts how to paint the lining inside the house in the country. The photos presented in the article will allow you to understand which composition is best for this. If you do not want to hide the natural wood pattern, then you can use alkyd varnishes, but they are applied only on a completely dry surface. That is why you must make sure that the lining is prepared according to all the rules, which is not always possible. If this rule is not followed, the surface can quickly crack when dry.

It will not paint over wood and stain, but only change its basic tone. But you can use this composition only when you are sure of the ideal evenness of the products, they should not have flaws. When choosing low quality lining, it is best to refuse such surface treatment. If you are still thinking about how and with what to paint the lining inside the house in the country, then you can purchase opaque enamel that will completely paint the canvas. Natural wood will not be visible in this case, however, it is possible with the help of these mixtures to completely renew the surface, which has been used for more than one year and has lost its original beauty. The application of these compositions is carried out in several layers, between which you will need to wait a certain time.

Which varnish to choose

The huge assortment of paints and varnishes can be confusing for the modern consumer. By visiting the store, you can pick up varnishes that are great for covering the lining, among them alkyd, acrylic-polyurethane, water-based acrylic, water-based and polyurethane. Acrylic water-based are excellent for interior work, they can be glossy or matte in structure. Alkyd are versatile, as they can be used to cover the lining installed not only inside, but also outside the premises.

Traditional water-based emulsion excellently show their quality characteristics in interior decoration, but acrylic-polyurethane can be used even in those rooms, the surfaces of which will be exposed to sunlight. This is due to the fact that such compositions are completely not subject to burnout. If you are especially afraid that the lining will turn yellow over time or will age under the influence of ultraviolet rays, then you should choose polyurethane compounds that do an excellent job of protecting the wood.

How to paint the lining on top of drying oil

If the premises have not been repaired for a long time, then you may be faced with an acute question about how to paint the lining inside the house in the country on top of the drying oil. If necessary, you can grind the surface, only after that you can start applying any enamels or paints, however, you should abandon the organosilicon, which contains silicone. If you cover the lining with alkyd or acrylic compounds, then the materials will bond well together, as for even dry linseed oil. However, in the latter case, you should not rush, as the surface may subsequently become covered with ugly wrinkles.

If you cannot decide how to paint the lining inside the house in the country, it is recommended to read the reviews. From them you can find out that the base, if there are small cracks on it, ranging in size from 1 to 1.5 millimeters, can be covered with putty, but you should not be zealous when applying it. As a putty, you can use a composition made independently from chalk and drying oil powder. If you do not want to bother with preparing different mixtures on your own, then you can use a special putty for wood "Pufas", which is sold in tubes. Its cost is significant, but it meets all expectations. Another solution is a tinted one specially designed for wood.

Quite often, the owners of suburban buildings think about how and with what to paint the lining inside the house in the country, the reviews will allow you to understand which composition is better to choose. In most cases, the opinions of users coincide with the information presented above. But a successful outcome should be expected only with the correct choice of the mixture, as well as with the observance of the rules for application. To begin with, the surface is cleaned of dust and dirt, as well as old finishes. After the lining is sanded, for which you can use a regular pumice stone. In the next step, the master can apply a primer antiseptic to enhance the effect of durability. If you have already decided how to paint the lining inside the house at the dacha cheaply, then at the next stage you can purchase the appropriate materials and start work. To do this, use a roller, spray gun or brush. Movements should be directed from top to bottom.