Painting at home with a koroned. What paint paint plaster cored

Often for the finishing of facades and the inner walls of buildings, plaster "Coroed" applies. This is explained by the availability of material, as well as its high resistance to weather conditions. An important condition when finishing the facade "Koroned" is painting, which will give the walls presentable appearance. But before proceeding with the procedure, it should be familiar with the technology of its holding and possible difficulties.

Features "Coroed"

Since the price per M2 of painting work performed by professionals is quite high, many people try to spend painting on their own.

But, despite the simplicity of applying this decorative plaster, with which even a beginner can cope, its painting requires certain knowledge and skills. This is due to the fact that the "cored" is characterized by a two-layer structure, since the mineral particles are arbitrarily moved during the leveling, leaving characteristic traces.

These furrows can have the most diverse depth, shape and direction, which creates difficulty when painting the coating. Since it is quite difficult with this chaotic achieve a uniform distribution of the shade. Therefore, to understand how to paint the "Coroed" plaster, you must familiarize yourself with all the intricacies of the procedure.

Required tools in work:

rollers with different pile length;
several brushes;
sponge;
soft tires;
mitten.

Getting to the procedure is necessary after 48 hours after drying the base.

Types of paint

The trim of the facade "Koroned" must withstand the negative impact of ultraviolet rays and a variety of precipitation and at the same time maintain their decorative qualities. Therefore, staining should be carried out taking into account the further load on the coating.

Optimal types of paints for external works:

acrylic;
silicate;
silicone.

Each of them has a high level of moisture resistance and vapor permeability. In addition, their color gamma allows you to choose the optimal shade in combination with the roof. Facade paints during the drying form the upper layer, which protects the coating from the temperature drop and precipitation. Initially, they have a white color, and then they thank them according to the table of shades from the manufacturer.

For painting inland walls, environmental friendliness and safety are the main selection criteria. Therefore, wear resistance retreats to the background.

The main types of paints for painting "Coroeda" inside the building:

wATER -EMULATION,
acrylic;
latex.

The last two options are better to use indoors with high levels of humidity (kitchen, bathroom), since their wear-resistant indicator allows you to withstand this load. Subsequently, to strengthen the surface of the coating using the finish layer varnish.

Better to paint "Coroed", everyone solves independently, but when buying it is worth paying attention to the feature of the destination. Since paint for internal works is not able to withstand external conditions, it will later lose all their decorative qualities.

The main advantages of the procedure

Painting the stucco "Coroed" makes it possible to get a number of advantages.

A wide range of colors allows you to implement various design solutions, conducting experiments with mixing various shades.
Surface treatment creates a reliable protective layer, which significantly increases the resistance to the negative effects of external conditions.
The textured structure of the plaster makes it possible to paint into two colors, which is impossible to achieve when finishing the building with another coating.
The paint creates a dirt-repellent barrier, which allows the facade to remain clean and attractive at any time of the year.

Minuses

The main disadvantage of the painting "Coroeda" is the complexity of the process. This is due to the fact that the coating has an uneven structure and requires careful processing of all recesses.

The main difficulties in carrying out painting works:

When using a roller with a short pile, it is impossible to get to all the recesses, so part of the plaster remains non-crushed. This spoils not only aesthetic appearance, but also negatively reflected in the wear-resistance indicator, since part of the coating will remain unprotected.
Painting with a long pile roller is also difficult, since the tool will capture too much working solution. And this means that surplus, do not have time to dry, they will flock down. This leads to the need to apply additional tools to adjust the sublists, which will significantly complicate and drag out the process.

The optimal solution is the joint use of rollers and a sponge, but before the start of the procedure, it is necessary to practice on a small segment of the wall.

Is it necessary to primitive "Coroed" before painting?

Before proceeding with painting works, the basis should be prepared. This procedure includes stripping walls from dirt and dust, with further applying of primer, which will increase the adhesion of the layers. Subsequently, painting can be carried out immediately after drying the processed area.

The main quality of the primer:

increases the durability of the finishing layer;
strengthens the surface, and this is especially relevant for porous coating;
ensures uniform distribution of moisture, which is important when painting "Coroed";
it is an antiseptic, that is, prevents the development of fungus on the treated surfaces.

Ignoring this stage can lead to the fact that after a short period of time, the wall decoration will have to repeat.

Painting the facade implies a harmonious combination of all elements of the building, which will help to emphasize individuality.

Therefore, when choosing a color solution, you must adhere to certain rules of the combination of shades.

For the facade it is better to choose the paint of pastel tones, which will help him organically fit into the overall design, while it is easier to choose the shade of the roof. To avoid monotony, you can use the selected color in two different shades.
If in the idea to make the facade multicolor, then you need to pick up harmonious shades, which will help streamline the manifold.
The color of the walls is better to make the lighter shade of the roof, although the opposite option is possible. But it will be possible to embody it only with the help of a professional designer or architect.

Consumption on M2 and the cost of painting works

Before proceeding with staining, you need to calculate the required amount of finishing solution. It should be borne in mind that in this case the plaster has a relief surface, so the average paint consumption will be in the range of 500 g per 1 m2.

For more accurate calculations, arithmetic action is necessary. To do this, it is necessary to calculate the total surface area, taking into account all the openings and the boundaries of each color. In the future, examine the bank of the paint and find on it indicated by the manufacturer the indicator of covers and multiply it to the coefficient of 1.4-1.7, based on the structural feature of the "Coroeda". The result resulting will mean the estimated flow rate of a colorful solution by 1 m2. Subsequently, it remains to calculate the desired paint volume commensurately treated area.

The average price for M2 painting works on staining decorative plaster "Coroed" is 120-150 rubles.

Classic way

In this case, the procedure implies the use of one color. In this case, an uniform layer is superimposed. To do this, the paint is distributed with a long pile roller or with a sprayer, with a simultaneous score of the furrows and recesses with a neat brush. In the process of painting work, it will appear to appear, which must be brought to a sponge or mitten immediately.

The paint roller is applied up and down, but each next vertical layer must capture the previous one. When using the brush, the direction of the tool must be alternate - then vertical, then horizontal, which guarantees uniform layer overlay.

In order to save it, you can use the applied primer, which is directly applied to the plaster. After driving this layer, the paint is applied with a roller, but at the same time there is no need for an additional crushing of recesses.

To simplify the staining procedure, you can use the method of tinting plaster. To do this, you need to add a color pigment directly into the solution before applying to the walls.

An important condition for the uniform painting "Coroeda" is to create the same shade for the entire required solution. After driving the finishing layer, the roller should be applied from above another layer of paint, but avoiding it from entering into the recess.

It should be understood that only polymer cement dry mixtures can not be pigmented, since when adding a painting pigment, over 5%, their quality is sharply reduced, which is reflected in wear resistance.

How to paint the plaster "Coroed" in two colors?

In this case, with the help of different shades, you can achieve a more spectacular appearance of the building. But at the same time should be observed. Therefore, the optimal option is to use one color of paint, but different shades.

Initially, staining is carried out using a roller with a long pile. It helps to process all shuffle and recesses in the plaster.

The second stage of painting works is carried out using a foam roller or sponge. At the same time, it is necessary with the help of spikes on the tray with paint achieve a minimum amount of solution on the instrument. And then with light movements to cry out the protruding parts of the plaster without recesses. For this receipt of two, you can also use the method of the apparatus primer.

Knowing these subtlety of painting works, you can independently spend painting "Coroed". But it is first necessary to work out the technique at the most invisible place of the wall, but only after that begin to the face.

Color in two colors

Wonderful thing, this decorative plaster Coroede! Its convenience is that the cement base makes it possible to apply it in places such as facades of buildings and private houses. Eastern environment, she is not bad tolerate. And if you take into account the apartment, then balconies and loggias, even glazed, even open, are an excellent opportunity to apply this type of finish. The decorative plaster Coroed is convenient in operation, no special skills are required for applying, as necessary when working, for example, with Venetian decorative plaster. But there are cons. For example, painting the decorative plaster cores in two colors in many causes difficulty. Let's look at the options and ways to solve this problem.

About the minuses of Coroeda

Minus number 1. It's hard to paint.

This is actually a certain difficulty, as the texture is such that the finished surface has numerous recesses, similar to the deepening in the tree, an isolated Zhukom-Korothe. Here to scroll them - this is the greatest difficulty.

You need to take a roller walk and good to soak his paint. The paint will fall into the depressions, then flow from there, and ugly accumulate on the plane. We'll have to collect her roller. And after all, in these deepends there will still be a non-rope that will have to be painted with a brush. In general, to suffer, and think about what would be better not to paint.

Minus number 2.

After coloring in one color, you really will understand that it was better not to paint, since the coroede painted in one tone looks good only if it is made perfectly. And if you only once and other tried to make decorative plaster with your own hands, then before ideal you are still far away.

But the exit to fix everything. Painting the surface for the second time already different. But with such a condition so that only the plane is painted, and the strips, furrows and potholes remained in the original color. It already looks original enough. Therefore, if it happened, then forward. Krable with another tone over the already painted.

How to paint a cored in two colors

But there is an opportunity to avoid torment from the processary inside of the invoice. The method is quite simple. It lies in the koller to add to the plastering with it when it is mixed. Then, in the manufacture of a decorative layer, it will already have an initial color.

Perhaps you had a thought, how to achieve that I did not differ from the kneading color? This is actually not easy enough. But in fact it is not necessary. The approximate tone for each kneading will be enough. First you get the difference in the palette of different zones.

Project "Wet facade - secrets of installation" - Stage 20 Applying decorative plaster "Coroed"

Disadvantages of cores

Hard processing. This is very significant difficulty. The Cororad has a certain texture that has many deepends, which are similar to pits and trenches, left by the bugs-cores in the wood. For their treatment will have to suffer greatly. Of course, you can see many hours trying to process. But it will require a lot of strength, time and emotion.
Not very beautiful view after processing. After the processing is produced, the appearance will not inspire confidence. Only if the coroede was originally made perfect, then he will look beautiful.
If you tried to make a coroede plaster with your own hands, you can hardly achieve an ideal result.

Do not think that everything is so bad. There is still an output. You can paint the surface more than once. It is done that all the depressions and cracks are obtained by one color, and the rest of the surface is different. From the side, such creation looks very interesting.

Painting of the cores in two colors

For a modern person there is an excellent way to not expose yourself to torment when processing internal parts of the invoice. The photo you can see how the interior is originally described in this method.

To do this, add a keler to dissolved plaster during kneading. As a result, during the production of the layer of scenery there will be a given color.

Advantages of painting

As already mentioned above, all procedures can be performed with their own hands. This does not require any special skills.

So, what advantages has painting with decorative plaster?

Selection of paint

The choice of any buyer offers decorative plaster, which can be used for processing, color, or white. If you speak directly about white plaster, it implies use in further processing. Color purchased ready to be applied to the surface.

To competently approach the color selection process, you can consult with designers, or see the photo on the Internet, which present various options for design elements of apartments and houses. The main thing is that you yourself like the approach, because it will most often come into contact with future creation.

Technology

So, you figured out with flowers and tones, it remains to paint the plaster with your own hands.

First you need to prepare the walls for further decorative plaster on them. What does this mean? First, cleaning the walls, the preparation of the mixture, the leveling of the base and so on.

Secondly, painting can be produced in two ways. You need to stay on one of them. In the first case, the paint will be applied to the ready-made basis. In the second case, you will have to make a kel in the mixture.

If you speak directly about paint cover, then interior and facade paints can be applied. You can dye in two colors, change the color range, apply various colors overflow and so on.

Naturally, do not do without a certain set of tools. This refers here:

brush and roller to apply paint;
cord from Capron, designed to move the bucket with paint;
plate with spikes.

Before the start of the work, it is necessary to provide for the flooring on the floor, walls, utensils and other interior items to avoid paint from them.

Currently it is believed that the easiest and fastest way to paint is one pass. But at the same time, only one color is most often used.

How to paint the decorative plaster in two colors with your own hands: photo, video

Painting of decorative plaster in two colors is a spectacular and interesting type of finishing, which is easy to master your own hands.

Painting of decorative plaster in two colors - Basic rules

Many have already appreciated the benefits of using decorative plaster, which can perfectly decorate not only the facade, but also the inner walls of the rooms. There is a large selection of this material, and the painting of decorative plaster in two colors creates a unique and original interior design.

Features Painting

Before proceeding with the performance of work, you should familiarize yourself with the properties and characteristics of the material, as well as the rules of the technological process for high-quality and durable finishes.

Compliance with the rules for selecting material and properly performed work will provide not only the beautiful appearance of the walls, but also save money to alteration.

The double painting of the core has a number of features, the observance of which will eventually make it possible to achieve a qualitative result. To fulfill such work, there is no excessive experience, it is only in detail to get acquainted with technology.

The main drawbacks of the Coroeda

The use of such an embodiment for internal design of the premises has some difficulties to which refers:

A rather laborious process of surface treatment;
An attractive appearance is achieved only with properly performed works, which is quite difficult to achieve;
In most cases, it is recommended to turn to professional masters, in order to get a high-quality finish.

However, despite all the difficulties in performing plasters in this way, there are also positive parties. So, for example, the walls can be painted repeatedly, while the removal and the depressions are painted in one tone, and the rest of the surface is different, which looks quite original.

Main advantages of double shuttering

Painting with decorative plaster in two colors actually has many advantages.

Among which you can select the following:

A similar way to finish the walls allows you to create original and unique design, and when the collapse was used, you can create various design solutions;
Protection against moisture and direct sunlight;
When choosing light tones, the walls will not overheat.

Rules for choosing paint

In order to correctly pick up the decorative plaster, the coroede is still recommended to consult with a specialist, because the further decoration of the walls depends on the quality of the material.

There are two types of such paint: white and color. The use of white paint requires additional processing, for example, staining to a certain color.

Color plaster is offered in a wide range of color palette and is realized in a ready-made form, which only need to be applied to the surface.

Paint technology technology

After selecting the tone of the plaster, proceed to the preparation of walls, namely thoroughly cleanse them all possible pollution, old coating and dust. If necessary, surface surfaces should be aligned and get rid of existing defects and flaws.

Direct painting of walls can be performed by several options. For example, you can apply plaster on the prepared surface or add another shade into a pre-cooked mixture. You can also combine colors on the walls, thus creating a beautiful style in the interior, emphasizing the individuality.

For plastering the room, you will need a certain set of devices, which includes a special container with plates and spikes, brushes and rollers.

Before plastering, it is necessary to cover furniture items and the floor with a protective film to prevent plaster from them.

Options for staining of walls

There is not one way to dye the walls with decorative plaster.

To which refers:

Staining in one layer. The easiest option of wall finishing, which does not require professional skills and is used by one type of material;
Option dry brush. This method involves applying the starting layer of the dark color, which after its drying it is applied a lighter shade. This allows you to create relief and volumetric design, and to perform work it will take a brush with a short bristle;
Blur. This method of staining allows you to visually highlight the depressions on the surfaces, for which darker tones are used. This option is considered the most time consuming compared to the rest of the methods and requires significant material expenses, as well as more time on plastering.

When painting with decorative plaster in two colors, varnish can be used as the finishing protective layer. It is applied after the final drying of the Coroeda, and it is recommended to acquire water-based varnish.

In order for it to get deep into the plaster, it is diluted with half with water. Varnish is applied in several goals, after the previous layer is dry. Such a varnish coating not only additionally protects the walls, but also gives it gloss, the attractiveness and originality of the finish.

It is necessary to apply lacquer to the entire wall, while avoiding the omit, so that in the end there are no ugly footprints. And for its application, a wide brush is suitable, which is well pressed before applying a lacquer on the wall.

Painting of decorative plaster: selection of materials, work tools, work technology

The application of decorative coverage and painting of the surface is by no means cheap pleasure, given that the price for the services of professional masters of this area is large enough. Therefore, it is advisable to fulfill all the work on the finishing yourself. Painting of decorative plaster with their own hands - the occupation is not the easiest, requiring a thorough study of the theoretical component.

The photo shows the decorative coating

Decorative finishing coating is an exclusive in the design of the walls. It is the walls, both in residential and in any other rooms, are decorated with decorative coatings capable of radically transforming the inner space of the room.

Decorative plaster or wallpaper for painting in most cases require subsequent application of the paint layer.

Let's try to figure out how to paint the decorative plaster with your own hands and, which for this you choose materials and tools.

Choose materials, consider expenses

In most cases, the finished plaster mix is \u200b\u200balready diluted by the factory method, in different color shades and painting it, do not have to. It is enough just to choose a suitable color solution in the store and apply material on the prepared foundation.

Decorative plaster under painting, as a rule, is sold in a dry form and when diluted and further applied to the pre-prepared surface of the wall has white or slightly grayish tint. It is this type of material that is designed for further painting.

Finishing options, not all as you understand!

The composition of paints for coatings from decorative plasters includes ingredients on acrylic, silicate or silicone and water based.

To determine the required amount of paint for finishing, you must calculate the total area of \u200b\u200bthe treated surface. To do this, it is necessary to multiply the perimeter of the walls to the height, then from the resulting calculation result, you need to take a predetermined area of \u200b\u200bwindow and doorways.

To the note: it should be noted that the painting of embossed plaster will take more amount of material to the painting, and the finish will be carried out twice, which means that the resulting wall area can be safely multiplied by two plus 10-20% of the material on the supply.

By producing correctly the necessary calculations of the walls of the walls, you can calculate the total costs of materials.

IMPORTANT: It is strictly not necessary to choose to perform work on the finishing, for example, flame retardant paints for metal polystyl or no less well-known electrically conductive Zinga paint. These types of paints and varnishes are more suitable for protecting metal elements.

Tools for work

The set of tools is minimal and includes:

Plastic tray (cuvette);
Drill with a small mixer for stamping material;
Brushes with a wide working basis or roller;
Polyethylene film for floor protection against splashes;
Rubber gloves, glasses and special rob.

Small drill with plastic nozzle

Technology performing work

All work on the application of the paint-layer on the decorative coating should be performed only after the basis is completely dry. Approximate deadline for complete drying of plaster from 48 hours depending on the thickness of the layer, such as the material and air temperature indoors.

The preparation instruction is such that if the basis is not quite strong it is advisable to strengthen with special colorless types of primer. After the primer, the foundation is dried again and only after that break through the painting of walls.

Paint in the bank is thoroughly stirred and in small portions poured into a plastic tray. The surface of the floor closer to the processed wall is closed with a polyethylene film.

The composition should be uniform, so we thoroughly mix the paint.

Collect paint with brush, both in a vertical and horizontal position: so more convenient and faster. Or roller from the bottom up in a vertical position.

At the same time, it is necessary to thoroughly press the excess material from the brush or roller in the tray to avoid splashing to the floor. Thus, you will prevent excessive material overrun and do not stain the floor covering.

When applied with paint with horizontal strokes, in parallel, make a decisive in the vertical position in parallel, so you completely proceed the selected section of the wall and leave the unprocessed glimpses.

Conducting work, do not forget to take the composition of the material of the same brush to avoid the formation of frozen film on the surface.

You can perform actions and brush - how comfortable!

The application of paint with roller does not differ from the application of the brush.

For this, the roller needs to be dipped into the cuvette with the material about half of the tool in the horizontal position and roll along the ribbed surface of the tray for removing the excess material.

Apply the composition on the wall is best at the bottom up. At the same time, it should be somewhat overlapping the subsequent bands by about 5 cm, in order to avoid non-procrase areas.
As you need, pressure on the roller increases so that uniformly not released on the overall background coating.
In some cases, the masters are applied on the wall first with wide brushes with a maximum decisive, and then rolled with spongy or shaggy roller. Thus, the highest possible applying paint on walls covered with decorative plaster is achieved.

Prayes stucco in two layers

How to paint the decorative plaster in two colors? For this, at the stage of kneading a plaster mortar, it is better to add the color tone to it. Or in the case of buying a finished solution to choose the desired color.

Thus, you will receive the first base color and further experimented, you can process individual sections of the coating with other color shades until the optimal type of surface is achieved.

Two Color Finish

For example, you can withdraw with different colors and cracks and other individual sections of the wall finishing coating, thereby obtaining a stunning visually tangible effect.

Having studied our material and video in this article, you can repeat the entire process of applying paint to decorative coating with your own hands. After performing the work independently, you will get invaluable experience and can be repeated this procedure for decoration of the walls in your apartment or a private house at any time.

Painting of decorative plaster: how to paint in two colors and other ways, video and photos

How to give color decorative plaster

In recent years, decorative plaster occupies one of the leading positions among finishing materials. At the same time, I even often want to save on repair, and the best way to save money is to do everything with your own hands. We will tell how to paint the decorative plaster without attracting specialists. After reading this article, you can do everything qualitatively and creatively that the result of your actions is aesthetically attractive.

Painted decorative plaster will look very stylish

Main advantages

The popularity of use in the decorative plaster finish is growing due to such advantages as:

wide color gamut that allows you to implement any designer fantasy;
plasticity and simplicity of application - when working with this material, discomfort is not created, and at the expense of plasticity you will be easily applied;
ecology - Nowadays it is extremely important. We pay attention to what surrounds us, especially if we are talking about a children's room;
durability - long service life will save your expenses in the future.

Types of colors

The paint needs to be chosen depending on where it will be applied (inside or outside the house). And facade, and interior paints can be made on the basis of organic solvents, including:

There are compositions and water based. After choosing the paint, count, how many cans you need to buy. To do this, you need to measure the surface area that you gathered to paint.

At the banks with paint always indicate an approximate consumption. It is best to take the maximum value, multiply it to 2 (paint, as a rule, you need two layers) and add 15-20 percent to the resulting volume. Decorative plaster has a relief, and the higher, the more consumption.

Decorative plaster itself is white and colored. An extinguishing element has already been added to the color stucco, and in the future you need to paint. You can also add a koler in the mixture that you will apply on the walls. Be prepared for the fact that the color of the dried plaster will be different due to the fact that after drying, the finishing material becomes a little lighter.

Paint methods

If for your interior you have chosen decorative plaster under painting, you should know how to do it right.

First of all, it is necessary to wait for the complete drying of the plaster. Depending on the humidity of the air, the composition of the mixture and temperature in the room, waiting can delay the three days. It is recommended to process the finishing material of a colorless primer in order to prevent detachment and squeezing. After the primer snacks, you can safely begin painting.

Depending on the desired effect, it is necessary to use either roller or brush

To perfectly smoothly paint the surface, you must first use the brush, and then the roller. The simplest way is the color of "one pass". You will need a roller with a long pile (you can use the usual brush) for painting the surface (including all recesses and protrusions). As a result, a basic shade will be obtained.

If the protruding areas of the relief subsequently apply a darker paint, the wall will visually acquire an additional volume. Such an application technique is called "Dry Brush Method". You can make a highlight (of course, if it is fit into the interior design) and instead of dark paint use metallic (gold, silver, bronze). They are applied with a dry brush or a special veasage.

In order to reduce color contrast on the surface having a fine texture, you need to rub the paint with a rubber sponge. If you do not have it, you can use a mittens.

With this reception, you can strengthen the effect of deep relief - the coating will acquire the type of antiquity (again, it should be done only if such a wall will fit into the overall concept of your interior). In this case, the use of metallic will be relevant than ever.

You will probably sign the effect of "Coroed". To achieve it, you need to use a short pile roller. At the same time, the grooves will remain in which the paint did not get, which will create a pattern. You can carefully experiment and strengthen or weaken this effect by adding the coloring pigment and re-painting the wall.

Paint it is desirable to choose high-quality

If you like the blur effect, and you want to embody it on your walls, it is worth navigating into large temporary and physical costs. The "Blur" method lies in the fact that dark paint is applied on the main surface background. It is necessary to wait for this layer to drop (important: not dry completely). Then he was erased with a damp cloth from all the convex places. The depressions will be much darker, creating a bulk drawing.

For this method, high-quality paint is used, which has resistance to the washing of walls (for the base). At the same time, you can use a cheaper non-fatty aggregate, as it is easier to flush it.

The final stage of painting decorative plaster can be the applix of the protective layer of varnish. It is applied as a fixer to the surface of the walls after complete drying. For such purposes, water-based varnish is suitable.

In order for the varnish to penetrate all the depressions, it needs to be dissolved with water in proportion 1: 1. Apply a varnish in two - three approaches (take a break so that the lacquer can dry) a pressed brush, avoiding the flows. The surface will be spectacularly glilate at the expense of the varnished layer, and what is important, it will be easier to care for the walls.

We hope you were convinced of the appeal of decorative plaster. Now you know how to paint it, and you understand that there is nothing complicated. Decide with the effect you want to prepare the tools you need to work, buy paint and proceed to business. Let your walls acquire individuality, absorbing your fantasy and hard work.

How to paint decorative plaster

Why is it so often chosen by decorative plaster? What methods of painting decorative plaster exist?

Painting of decorative plaster in two colors

How to paint a cored in two different colors

The advantages of decorative facade plaster Coroed has already managed to appreciate many owners of private houses. With the help of such a finish, you can give your dwelling an attractive appearance and protect its walls from any external negative impacts. Among the important advantages of such decorative facing, it is often possible to paint the plaster with two colors.

It is quite possible to paint the facade with two colors yourself, however, for such a job, some knowledge and skills that can be learned from the Internet are required.

Facing KoroT.

Painting of facade plaster in two colors is the final stage of finishing work, before which the owner needs to be solved and other important tasks.

It is better to imagine what plaster Coroede, owner, should be understood in all the features of such a cladding, take into account all the pros and cons.

Disadvantages of plaster

First of all, it is necessary to deal with what difficulties in the work will have to face the owner of the housing, which decided to finish the facade of the cored independently. Z.

these people - specialists in the construction and finishing of residential buildings, usually allocate two minuses in such a finish:

Despite the disadvantages described, with the help of a korora, you can really give the house an attractive appearance, originality, even uniqueness. Painting in two colors is an excellent solution for all owners conducting installation work on their own. It is easiest to paint out obvious facade irregularities in one color, and the rest of the area is different. In this case, you can get a very original design.

When finishing the facade of the core, the cooler can be added to the plaster, in this case, immediately after applying to the wall, the cladding will already have one desired color, and therefore the owner will only remain the owner to the other enamel.

Benefits of staining

Despite the difficulties in working with the core, this option of facing the external walls of the building enjoys the owners of a wide variety of buildings. This is due, of course, with a large number of advantages provided by the plaster itself and the color.

Among the main advantages of the painted, the cores can be allocated:

How to choose paint

When buying decorative facade plaster, the owner can immediately choose the finishing material of white or other color. In the first case, the plaster will definitely need staining, in the second - at the request of the owner of the house.

As for the choice of color, then the owner has to be solved independently, the owner can order services of professional designers who will select the most suitable tones that will be applied to plaster.

Staining technology

When the facade paints are selected, it is necessary to understand what implies coloring in two colors, as paint is applied. First of all, before installing the decorative plaster, it should competently prepare the surface of the facade, that is, clean the walls, prepare a solution and close all defects.

In addition, before installing a koroad, you should choose whether the color can be added to the plaster before installing, or the plaster will be painted already after installing the coating on the facade.

A variant of staining of the already lined plaster surface give the owner's widest opportunities. For such treatment, you can use a variety of paints, you can use in two colors, you can use various technologies and methods by which the paint is applied to the surface, etc.

In any case, before staining, you need to purchase not only the selected paint, but the tools necessary for conducting such finishing works. For the color of the installed plaster, brushes, roller, means for mixing paint and spiked plates are required.

The easiest way to paint the croroede is painting in one pass, but in this case only one kind of paint is applied. To achieve any original appearance for your home with this method will not work.

Painting of decorative plaster is the final stage of the finish. Decorative plaster can be white or gray, except for the one that is already purchased at the finished form with the addition of color pigment into the plaster mix. White or gray stucco are designed under painting.

Painting of decorative plaster

For painting decorative plaster, both facade and interior paints are used. They can be on organic solvents, which are silicate, acrylic and silicone compositions, or water based.

In the event that the painting has plaster, then before starting work, first of all, it is necessary to determine the area of \u200b\u200bthe working surface. For this purpose, the perimeter of the walls should be measured, after which multiplying it to height. It is also necessary to measure window and doorways to then subtract them area. Now, choosing the paint, you can calculate its approximate consumption.

The surface covered with decorative plaster has usually a well-pronounced relief. The higher the relief of the surface and less elements, the amount of paint will be greater.

It is better to take the maximum value indicated on the can with paint. Multiplying this number on the placement location, double the resulting value, as the color is made in two stages. Then, add 15-20% to the resulting litter.

Stucco and painting of walls, choose tools:

For painting, the following tools will be required:

Roller with a tray for a brush
Kapron cord (on a bucket with paint to prevent its splashing)
A small plate with spikes along the edge of the tray.

For coloring plastered surfaces, you can use a wide brush, roller or a special mittens.

Painting of decorative plaster # 8211 Technology and methods

How to paint decorative plaster?

It is possible to start any painting work on the plaster only after the layer of plaster under painting is completely dry. To do this, you may need to wait from 8 to 48 hours. Duration of drying depend on the composition of the plastering mixture, the level of humidity and ambient temperature.

If there is a tendency to detret or squeeze the particles of plaster, to strengthen the surface it is advisable to process the plastered wall under painting with a colorless primer.

When the primer dries, you can begin painting on decorative plaster.

Before starting work, you need to protect against splashes and drops of paint furniture, floor, windows and other surfaces. To do this, it is recommended to use a special polyethylene film, which can be bought in any construction or economic stores. When painting facades, such precautions will not need, but the windows and the track near the wall still should be covered. Before using the selected paint, it is necessary to stir well. The paint is applied to the walls using a roller or brush. When painting walls with a brush, paint is applied both horizontal and vertical strokes.

Apply the paint first with horizontal strokes, then grow their vertical. In order to get a flat color, it is recommended to be the same brush that is applied to the paint, periodically shack it so that the colorful composition in the process of work remains homogeneous in color and delicate, and the sediment will not be formed on the bottom. Technique painting roller is also simple. First, immerse the roller in the paint and slide it through the studded plate along the edge of the tray to remove the surroundings of the paint.

On the wall, the paint is applied in the direction from top to bottom, and then from the bottom up. The paint bands need to be applied so that they lay one on the other, about 4-5 cm. As the paint consumes, the press force on the roller increases so that the paint lay down the uniform layer. You can paint the wall both in one and two receptions. In both cases, paint should be thoroughly growing.

Painting roller plaster

You can get an ideally colored surface, if you first use when applying a brush, we grow well, and then roll the surface with roller. The easiest way to paint decorative plaster is coloring in one pass, that is, the full painting of the plastered surface, including all the recesses and protrusions in one tone. You can also try to use a combination of several different colors. To do this, with the help of a roller, a light base layer of paint is applied to the surface. After it is completely dry, the protruding areas of the relief are covered with paint a longer shade. This technique of imparting an additional volume of the plastered surface is called the Dry Brushes method.

Sometimes metallic (bronze, gold, silver) is used instead of dark paint. They are applied using a dry brush or a special mittens.

To soften the color contrasts on the surface having a smaller texture, you can additionally rub the paint with a mittens or rubber sponge. The same admission is used to enhance the effect of deep relief or, if it is required to make a decorative coating as an antique. The protruding details of the relief permissible to emphasize the application of bronze, gold or silver paint.

Using a short-sighted roller, you can achieve an interesting effect when painting the surface of the plaster under the painting of the type of cored. Staying non-pecked, the grooves form a contrast cored pattern on the wall. This drop can be strengthened, or, on the contrary, muffled, after adding the coloring pigment to the plaster, then paint the walls in the same color, but with another tint.

How to paint decorative plaster with inhomogeneous texture?

Painting of textural plaster involves some features. If the woven surface of the wall combines textured and smooth sections to start painting with textured. Smooth elements can be painted only after it is completely dried. If you do not take this moment into account, then when applying paint on the entire surface of the wall, without taking into account its invoice, weakly fixed particles of the plaster surface can be peeling, naply on the smooth sections. After drying, when the layer is re-applying, the paint layer strictly observe this sequence is no longer required.

Dried and painted decorative plaster additionally can be covered with beeswax, in order to give a matte gloss surface.

Color in two colors

About the minuses of Coroeda

Minus number 1. It's hard to paint.

How to paint a cored in two colors

By the way, on the first photo, the lower part still did not dry, therefore it has stains.

But after you paint the entire plane in the second tone, this difference in deepening is completely invisible. Judge for yourself.

Decorative cored plaster with the addition of a collera and a solution painted by the second tone.

All the complexity of the coloring of the decorative plaster will be in this case that the paint does not turn around in the furrower of the cored. To do this, take a short pile roller, for example, velor, and easy to press, go through the text path plane. The result will be wonderful.

Another way to color decorative plaster

What to do if the decorative plaster of the crorot you have already applied, but did not add the kel into the solution? Is it possible to paint, avoiding torment from the procraner inside of the invoice? There is a second method invented by enterprising malariers. We take the primer, latex or acrylic, and add a kel directly to it. And then we impregnate the entire finished surface with this applied soil. The primer is liquid and quite easily crosses in all the pores. And when drying, it forms an imbued layer. At first you can be horrified, because it will be not enough.

Type of decorative plaster after applying primer with added in her with a color

But after the color of the plane in the second tone, you will not be disappointed. After all, the result will be such that you do not distinguish what you have been painted there for the first time, paint or impregnated with mounted soil.

Most likely, these small subtleties will help you that your decorative plaster Coroede looked impressive.

And one more advice. Many who first embark on such types of work, chooses the most noticeable and large wall immediately. Do not allow mistakes. Start with the most invisible. And when it comes to the big one, you will have some experience.

Painting of decorative plaster in two colors

How to paint the cored in two different colors of the content of the article: In this article: the advantages of decorative facade plaster Coroed has already managed to evaluate many owners of private houses. With this ...

A characteristic feature of this plaster is a texture surface, which depends on the type of rubbing. It has its difficulties - due to roughness of the base with typical furrows. It is important to handle the wall so that the three-dimensional effect is preserved - without filling the texture pattern.

Why do you need painting of the border

Before painting a coroede, it is necessary to give themselves a report in the complexity of working with a specific porous texture, made by "wormworms". A dense layer consisting of environmentally friendly components periodically updates painting. This will help:

update the interior, give novelty;
additionally, protect the surface from excess moisture, temperature drops, other devastating factors;
staining with different colors - one of the simplest techniques of functional zoning;
the transformation of walls with the use of double and triple staining will give depth and volume of the characteristic texture.

A lot is written and filmed video about how to paint a cored, but not a special composition for this type of decor.

Advantages and disadvantages of painting

The most important advantage of any repainting is excellent coating aesthetics. After the update, you can forget about the repair for a long time, the paint will protect the surface from drying out and cracking the porous plaster.
When they talk about the shortcomings, we mention the time-consuming time, the protracted processing process:

it is difficult to choose a tool for full filling of grooves;
it is necessary to have a skill to gain a solution to the roller so much so that it is enough for a full-fledged update, but it did not fill in the recesses in the plaster of the cored at painting;
often it is necessary to work with different tools, special roller nozzles for the uniform distribution of the composition, removing sponge of surplus.

Those who have enough patience to independently complete the painting process, will be lucky to see the excellent fruits of his work.

Which paint choose

Construction companies use modern facade paints and water-based emulsions, proven by practice. Thanks to special equipment, it is available to quickly processing large areas with decorative plaster.
For household staining indoors, alkyd or acrylic enamel is recommended. It is permissible to use classical oil suspensions, as well as the recent generation water-emulsion compositions.

Note! Paintworks are available with the "Coroed" effect - painting will combine the characteristic texture of various materials according to the properties of materials.

Oil

People of the older generation are well known to the suspension, which was bred by Olife and painted everything in a row - from windows to doors. Until recently, this paint did not have a decent alternative.
Characteristics:

thick oily base with a typical smell for solvent;
the coating forms a steamproof film;
the surface is transformed when contact with caustic solvents, alkalis and acids;
when heated is flammable;
under the direct influence of ultraviolet rays quickly fades.

Although the painting of the "Coroed" plaster is made very rarely, at large home reserves you can apply it for these purposes. Modern enamels practically crowded this variety from the market.

Alkyda

Alkyd enamels are also suitable for painting the plaster cores, including outdoor work. The binder persistently protects the walls of the house from atmospheric factors and temperature differences.
Available cost is the most important advantage of this suspension among the analogues.

Note! The building materials market is filled with poor-quality falsifications - there is a risk to acquire a fake for decent money. Do not purchase suitable paint without certificates.

The main drawback when using indoors is a characteristic smell of a solvent that will be felt after repair for a while.

Acrylic

Water dispersion based on acrylate - universal dyes under the plaster cored. They are widely used for indoor rooms, since it is environmentally friendly. Main advantages:

durable coating without persistent chemical smell (the water base is safe for people suffering from allergies and asthma);
a huge selection of color variations is an excellent opportunity to experiment;
the possibility of visual association of adjacent surfaces of a different type of common painting;
excellent vapor permeability - the walls "breathe", absorbing the surplus of evaporation, giving it into the atmosphere while drying, not cracking.

Important! Color or its intensity can be strengthened with the next painting of the plaster of the cored. The paintwork should be compatible with the basis, the color is to tone the darker coating.

Technology Painting

There are several ways to transform the decorative wall in the interior:

repaint the coafer plaster on the principle of contrasting blocks;
slightly update the texture in the former gamma;
paint with stripes or contrasting areas, out of several functional zones in the studio apartment or the combined living room;
paint the plaster core in two or three colors to strengthen the feeling of depth and volume;
add luxury, thanks to additional processing (patina effect or gravestone).

Note! The solution is prepared immediately before processing the walls so that it does not lose its properties.

Preparatory work and tools

The best tool is a specialized pulverizer for spraying water-dispersed paints by plaster. If it is possible, it is better to rent it for repairs. With a large amount of work, it is better to purchase a device for water-dispersed tinting. When there is no experience - entrust the team of specialists.
A good result will provide a suitable tool:

roller with nozzles (short and medium pile under fur);
brushes (small, medium) for penetration into hard-to-reach areas;
sponge or special verge of removal of excess mixtures.

In addition, you will need safety glasses, workers gloves, overalls. Work in a ventilated room without a draft.
The fastest result with the cororad painting provides a long-track roller. It is more convenient for them to work on wide stale. Inaccessible areas behind the battery, around pipes, sockets, switches are more difficult to operate without errors with a water-emulsion whitewash.
It is important to ensure that the surplus of the mixture is not accumulated in the furrows, which will dry for a long time. Too liquid composition can lead to cracking, swelling the foundation.
When preparing the premises to repair, it is important to make all the furniture, personal belongings, close the plastic film lamps, other design elements. Plaster is recommended to be treated with a vacuum cleaner to remove fine crumbs, suspension, dust.

Application of paint

Before painting a cored in two colors, it is recommended to make a sample on a hidden area of \u200b\u200bthe room. This will help make sure that both colors are harmonized with each other. The effect of depth can be achieved when selecting a darker color for grooves, a light shade - for the base.
The best preparation is the processing of suitable primer, the desired brand that the main dye has.

Important! Pigment can be added to the primer. It is applied by a pulverizer, carefully working on all decorative recesses.

It should dry (time is indicated on the package). For finishing, if it is a residential room, it is better to take import acrylic or water-emulsion paint. Processing starts from above to wipe the drift. It is preferable to operate with a roller, capturing wide areas, in complex places - brush.

Conclusion

The simplest way to update the interior is the staining of the plastered walls with a suitable composition. A competent selection of paint sprayed with a spray gun will make it easier. The best choice of paint is an acrylic or water-emulsion basis. Painting in two colors with a spraying will significantly improve the appearance of the room.

How to paint a cored in two different colors

In this article:

It is quite possible to paint the facade with two colors yourself, however, for such a job, some knowledge and skills that can be learned from the Internet are required.

Facing KoroT.

Painting of facade plaster in two colors is the final stage of finishing work, before which the owner needs to be solved and other important tasks.

It is better to imagine what plaster Coroede, owner, should be understood in all the features of such a cladding, take into account all the pros and cons.

Disadvantages of plaster

First of all, it is necessary to deal with what difficulties in the work will have to face the owner of the housing, which decided to finish the facade of the cored independently. Z.

these people - specialists in the construction and finishing of residential buildings, usually allocate two minuses in such a finish:

Benefits of staining

Among the main advantages of the painted, the cores can be allocated:

How to choose paint

Staining technology

The easiest way to paint the croroede is painting in one pass, but in this case only one kind of paint is applied. To achieve any original appearance for your home with this method will not work.

Want more information on the topic? Look at these articles:

Painting of decorative plaster

What paints choose and how to calculate the expense

For painting decorative plaster, both facade and interior paints are used. They can be on organic solvents, which are silicate, acrylic and silicone compositions, or water based.

The surface covered with decorative plaster has usually a well-pronounced relief. The higher the relief of the surface and less elements, the amount of paint will be greater.

Stucco and painting of walls, choose tools:

For painting, the following tools will be required:

Roller with a tray for a brush
Kapron cord (on a bucket with paint to prevent its splashing)
A small plate with spikes along the edge of the tray.

For coloring plastered surfaces, you can use a wide brush, roller or a special mittens.

Painting of decorative plaster # 8211 Technology and methods

How to paint decorative plaster?

If there is a tendency to detret or squeeze the particles of plaster, to strengthen the surface it is advisable to process the plastered wall under painting with a colorless primer.

When the primer dries, you can begin painting on decorative plaster.

Painting roller plaster

Get the perfectly smoothly colored surface can be used if you first use when applying a brush, it is good to grow, and then # 8220 roll # 8221 roller surface. The easiest way to paint the decorative plaster is the color of # 8220 into one pass # 8221, that is, the full painting of the plastered surface, including all the recesses and protrusions in one tone. You can also try to use a combination of several different colors. To do this, with the help of a roller first on the surface, light # 8211 base layer of paint is applied. After it is completely dry, the protruding areas of the relief are covered with paint a longer shade. This technique for the addition of an additional volume of the plastered surface is called # 8220 Dry Brush Method # 8221.

Sometimes metallic (bronze, gold, silver) is used instead of dark paint. They are applied using a dry brush or a special mittens.

To soften the color contrasts on the surface having a smaller texture, you can additionally rub the paint with a mittens or rubber sponge. The same admission is used to enhance the effect of deep relief or, if it is required to make a decorative coating view # 8220 under ancient # 8221. The protruding details of the relief permissible to emphasize the application of bronze, gold or silver paint.

Using a short-track roller, you can achieve an interesting effect when painting the surface of plaster under painting type # 8220 Coroede # 8221. Staying non-rented, grooves form on the wall contrast # 8220 cored # 8221 pattern. This drop can be strengthened, or, on the contrary, muffled, after adding the coloring pigment to the plaster, then paint the walls in the same color, but with another tint.

How to paint decorative plaster with inhomogeneous texture?

Painting of textural plaster involves some features. If on the plastered surface of the wall combines textured and smooth sections # 8211 to start painting with textured. Smooth elements can be painted only after it is completely dried. If you do not take this moment into account, then when applying paint on the entire surface of the wall, without taking into account its invoice, weakly fixed particles of the plaster surface can be peeling, naply on the smooth sections. After drying, when the layer is re-applying, the paint layer strictly observe this sequence is no longer required.

Dried and painted decorative plaster additionally can be covered with beeswax, in order to give a matte gloss surface.

Painting of decorative plaster video material:

Color in two colors

About the minuses of Coroeda

Minus number 1. It's hard to paint.

Minus number 2.

How to paint a cored in two colors

By the way, on the first photo, the lower part still did not dry, therefore it has stains.

But after you paint the entire plane in the second tone, this difference in deepening is completely invisible. Judge for yourself.

Decorative cored plaster with the addition of a collera and a solution painted by the second tone.

Another way to color decorative plaster

Type of decorative plaster after applying primer with added in her with a color

Most likely, these small subtleties will help you that your decorative plaster Coroede looked impressive.

Painting at home with a koroned. What paint paint plaster cored

Features "Coroed"

Types of paint

The main advantages of the procedure

Minuses

Is it necessary to primitive "Coroed" before painting?

Consumption on M2 and the cost of painting works

Classic way

How to paint the plaster "Coroed" in two colors?

Color in two colors

Project "Wet facade - secrets of installation" - Stage 20 Applying decorative plaster "Coroed"

Related Tagged Posts.

Disadvantages of cores

Painting of the cores in two colors

Advantages of painting

Selection of paint

Painting of decorative plaster in two colors - Basic rules

Features Painting

The main drawbacks of the Coroeda

Main advantages of double shuttering

Rules for choosing paint

Paint technology technology

Options for staining of walls

Painting of decorative plaster: selection of materials, work tools, work technology

Choose materials, consider expenses

Tools for work

How to give color decorative plaster

Main advantages

Types of colors

Paint methods

Painting of decorative plaster in two colors

How to paint a cored in two different colors

Color in two colors

Why do you need painting of the border

Advantages and disadvantages of painting

Which paint choose

Oil

Alkyda

Acrylic

Technology Painting

Preparatory work and tools

Application of paint

Conclusion

How to paint a cored in two different colors

Facing KoroT.

Disadvantages of plaster

Benefits of staining

How to choose paint

Staining technology

What paints choose and how to calculate the expense

Stucco and painting of walls, choose tools:

Painting of decorative plaster # 8211 Technology and methods

How to paint decorative plaster with inhomogeneous texture?

Color in two colors

About the minuses of Coroeda

Minus number 1. It's hard to paint.

Minus number 2.

How to paint a cored in two colors

Another way to color decorative plaster