My computer runs out of memory when installing or copying files: what should I do? If there is not enough space for Windows virtual memory: we solve the problem.

Hello dear readers of the Spectr-rv.ru blog. Today I want to tell you about one of possible causes decrease in performance (speed) of the computer. We will figure out what to do if there is not enough memory.

Everyone, I think, is familiar with the feeling of dissatisfaction with the slow operation of the computer, when you have to wait a long time for a page to load or the desired folder to open. There can be many reasons for this behavior of your PC. Computer performance is reduced due to system debris, autoloading of many unnecessary programs, severe disk fragmentation, virus infection, etc.

One of the reasons that negatively affect the speed of your computer may be a lack of memory. This mainly refers to "age" computers that have insufficient, according to modern requirements, the amount of random access memory (RAM).

Signs that your computer is running low on memory can be significant slowdowns or lag in response. Sometimes the program just stops responding and freezes. A picture may be observed when, when a command is selected in the menu, a blank page appears.

There are two types of memory: random access (RAM) and virtual (paging file).

RAM is a type of memory used for temporary storage of intermediate data obtained during computer operation. It is very fast and is used by all programs and applications. RAM is implemented in the form of removable modules that can be easily replaced or removed.

swap file. At not enough RAM, the system unloads RAM, directing unused to this moment part of the data in a special area on the hard drive - the paging file. This frees up space for new applications.

There are several ways to fix low memory problems, the most effective of which are installing additional RAM modules and configuring (increasing the size) of the paging file.

Installing additional RAM modules

If you are by characteristics made sure that your PC has problems caused by lack of memory, optimal solution will install additional RAM modules.

Before purchasing RAM modules, you should check the type of memory supported by the motherboard your computer. Also, you need to know the maximum amount of RAM supported by the motherboard. The necessary information can be found in the available instruction manual or on the manufacturer's website.

You can determine the amount of memory you need to run your computer smoothly by using the Task Manager. To do this, in windows 7, launch the Task Manager (Ctrl + Shift + Esc) and go to the "Performance" tab.

Here, in the "Physical memory" area, you see the amount of RAM (physical) memory installed on the computer ("Total" item). The "System" area ("Allocated" item) shows the amount of memory currently used relative to its total amount (RAM + virtual).

For normal operation computer, it is desirable that the amount of memory used, when running all the applications you use, does not exceed the amount of installed RAM. In this case, the system will not have to constantly use the paging file, which means that the possibility of undesirable manifestations in the form of "slowdown" will be minimized.

As you can see from the picture, my computer could use an additional 2 GB of RAM.

If, after installing additional memory, its size exceeds the level required for normal operation, then this will only benefit your PC. The operating system will be able to properly manage the excess RAM, which ultimately will give an additional increase in computer performance.

Swap file setup

Increasing the size of the paging file also allows you to partially alleviate the problem of lack of memory. By default, the system automatically sets and adjusts the paging file size, and it is not recommended to change this setting. However, in some cases manual setting paging file allows you to improve the performance of your computer.

When setting up the paging file, keep in mind that too large a paging file can slow down your computer. This is due to the fact that the speed of reading information from RAM is much higher than with hard drive where the swap file is located.

To configure the paging file, click the "Start" button and select "Control Panel" - "System" - "Advanced system settings" In the "System Properties" window, go to the "Advanced" tab and click the "Settings" button in the "Performance" section.

In the "Performance Options" window, go to the "Advanced" tab and in the "Virtual Memory" area, click on the "Change" button.

In the "Virtual memory" window that opens, uncheck the box "Automatically choose the size of the paging file."

Set the switch in the "Paging file size for each drive" area to "Specify Size". Set the initial and maximum size of the paging file. Click the Set and OK buttons. Restart your computer.

When configuring the paging file in order to optimize computer performance, it is advisable to observe the following recommendations

The optimal size of the paging file should be considered equal to 1.5 of the installed RAM.
On a computer with one hard drive, the swap file is best placed on the first disk partition.
If your computer has two or more hard drives, it is recommended to place the paging file on the fastest one.

Here are some ways you can fix the problems associated with the lack of RAM on your computer. And my article ends there.

I hope you understand what to do if the computer does not have enough memory, and also understand how the paging file is configured. Thank you for attention. Good luck!

P.S. Advanced SystemCare helps you optimize your computer.

spectr-rv.ru

There is not enough memory in the system: how to fix it?

AT modern world work on a PC is indispensable. But sometimes users encounter such problems that prevent them from performing any tasks. Such troubles include incompatibility of the program and computer capabilities, mechanical breakdowns and, of course, lack of memory. It happens that a person tries to install the application he needs, but receives an error and a message in response: "There is not enough memory in the system." It is about the solutions to this problem that will be discussed.

Virtual and RAM: how to understand what exactly is missing?

When a message occurs: "There is not enough memory in the system," the user is usually lost and cannot understand what is happening at all. You need to know what steps to take with such a problem. Many users mistakenly believe that hard drive space is all of the PC's memory. Usually newcomers have such an opinion. Therefore, when the corresponding message appears (“there is not enough memory in the system, save files and close programs”), not everyone understands what this means. Here is how this problem is solved.

First you need to figure out with which software the difficulty arose. It doesn't matter what version of windows a person uses, the computer always uses it initially RAM. Virtual memory is essentially a part of the operational. Therefore, if the user encounters a warning that there is not enough memory in the system, he needs to understand the following: when there is not enough space, the PC accesses the windows paging file.

Reasons for this error

In order to solve the problem, you need to figure out what could cause it. The reasons may be as follows:

too many applications are open, they all take up an impressive amount of space;
the computer itself has a small amount of RAM;
filled to overflowing HDD and there is simply no free space for virtual memory;
user manually configured too small size the swap file, and it is not enough for the normal functioning of the computer;
one of the applications takes up too much space;
a problem with a program that gives error messages like "There is not enough memory in the system."

These cases are the most common among users. Almost all of them can be solved by the owner of a portable computer or laptop. So, there is not enough memory in the system. How to fix this situation?

What to do if there is not enough RAM?

Getting rid of this error is not as difficult as it seems. If the difficulty lies in the amount of RAM, then just buy an additional RAM module. This part is now not very expensive and many will be affordable. Again, you need to understand that if the PC itself is old, then it's easier not to buy additional memory. This upgrade may not live up to expectations. Then it's better to save money for a new computer.

Low hard disk space

Today, hard drive storage capacities are impressively huge. But even with a disk size, for example, in terabytes, it often turns out that the user has filled it to the eyeballs, and there is literally a gigabyte of space left there. This is what often leads to slow work computer.

Each user should be aware that the computer memory, although large in most modern models but is far from limitless. And there is no point in constantly saving unnecessary files, programs and movies. At least once a month (and even then with occasional use) it is necessary to check the system for unused files and, if possible, get rid of them. This can be done manually or with an optional software. In addition, an antivirus scan also cleans the PC, clearing it of malware.

windows paging file

Some users sometimes change very important data on the computer, and then do not know how to fix everything back. And they suffer, most often, with the fact that there is not enough memory in the system, how to fix it (windows 10 is especially notable for this problem) is also not clear. And I don’t even remember that they manually changed the size of the paging file. Some users disable this file altogether. So if your system crashes and then you get a low space warning, you need to check if the swap file is enabled and increase its size if necessary.

Sometimes users install programs to optimize PC performance. And already these upgrades begin to host and change the size of the paging file or completely disable it. In this case, it is recommended to disable the action of this program or remove it.

One of the installed programs takes all the memory

It also happens that one of the installed applications crashes and starts taking up too much space. Then the user may also have a question like: “There is not enough memory in the system (windows 10), what to do with this problem?” Everything is simple. For starters, you can check the program for viruses. Malicious applications are often the cause of this error. If the program is not pirated and does not harm the PC, then most likely some kind of error has occurred in it. In this case, you need to deal first with the application itself.

In others windows versions Of course, there are such misunderstandings. If the question “There is not enough memory in the system (windows 7), what should I do if the program crashes?” you need to call the task manager and see how the processes are going on in it. When you open the "Processes" tab, you need to sort everything by the "Memory" column and determine which program is the culprit for the lack of space.

If the application with the largest coverage of space is the right one, and its removal will disrupt the operation of the entire PC, then you need to somehow reconfigure this software. Depending on the program that caused the problem, the solutions may also be different. As a last resort, you can try reinstalling the program.

But if the process that takes up a lot of memory is unknown and suspicious in itself, you should immediately turn to the network and find out by the name of the object what it is and how to rid the computer of its presence.

Nothing helped: what to do?

It happens that the problem is not solved in any way. Neither the change of software, nor the addition of iron does not help. In this case, it is a good idea to compare the age of the computer and the requirements of the programs installed on it. Perhaps that is why there are problems.

Many forums discuss similar difficulties. You can look for solutions there. If this does not help, it makes sense to contact technical support. Simply describe your problem, and the developers will advise you on how to make your PC more efficient.

Finally

The most common memory problems are due to computer games. It is recommended to carefully check the compatibility of the computer's capabilities and the requirements of the game, otherwise there is a risk of running out of memory.

New users can generally create problems for themselves by changing memory settings or by mistakenly installing malicious software. You need to check the installation files. In addition, downloading programs from unofficial sites can also cause your computer to crash. If there is no official website desired program, you need to check at least the reviews about the application. Subject to these simple rules You can save your PC from many problems.

fb.ru

The message "The computer does not have enough memory" in windows 8 / 8.1

Well, my work computer has been updated to windows 8.1 from the seventh version. Most new computers now come with this particular system, endowed with a bunch of new bugs and features ... and this, in turn, means that Microsoft company never stops giving topics for new articles.

Regular readers of the blog already know how to remove the message "Secure Boot (SecureBoot) is not configured correctly." Today I’ll tell you where the windows 8.1 complaint about lack of memory can come from. It was simply impossible not to notice this error, it was only necessary to open more than five tabs in Google Chrome how the application was closed with the corresponding error:

And this is on a freshly installed windows 8.1, on which the fly has not yet sat. It was impossible to put up with such a situation. A cursory analysis of a similar error on the network showed that all-knowing Internet experts on the forums unanimously blame evil viruses, although everything is much simpler. It turned out that the paging file was disabled, and the computer has only 2Gb of its own memory.

How to resize and/or enable swap file in windows 8

Right click Computer -> Properties -> Advanced system settings. On the "Advanced" tab, in the first item "Performance", click the "Settings" button. The "Performance Options" window will open.

On the "Advanced" tab, we see that the size of the virtual memory paging file is 0. Click the "Change" button Translate the "Size by system selection" switch and put a checkmark on the "Automatically select the size of the paging file" item. The computer must be restarted for the changes to take effect.

If you find the article useful, do not be lazy to like and share with your friends.

mdex-nn.ru

If there is not enough RAM

If the computer feels a lack of RAM, which is important for outdated PCs, and adding memory is not included in the plans for today, then you should try to optimize the memory and processor for running programs. But for this you will have to make some sacrifices. It is necessary to abandon full-color desktop wallpaper. After pasting pictures from the clipboard, replace it in the clipboard. Just select one character of any text and copy it. Thus, this symbol, which is not large in size, will replace the three-dimensional drawing in the buffer and part of the RAM will be freed. To optimize memory, do the following: right-click on the "My Computer" icon and select "Properties".

In the window that opens, go to the "Advanced" tab and in the "Performance" section, click the "Settings" button.

In the next window, go to the "Visual Effects" tab, check the box "Ensure the best performance".

Then go to the "Advanced" tab and switch to the "Programs" position.

Click OK. These simple tips I hope they will help at least slightly improve the performance of the system, and make it possible to use the computer until you are seriously engaged in its optimization.

tipskettle.blogspot.ru

PC is low on memory windows 10

1 Problem Solving
2 swap file
3 The disk may be damaged

Probably, most windows 10 users have come across an informational message stating that the computer does not have enough memory for its normal functioning.

As a rule, the problem only affects pirated and non-activated copies of windows 10. How to solve the problem without spending money on OS activation and without reinstalling it?

Solution

We check the amount of memory used and compare it with that installed on the computer.
To do this, go to the "Task Manager".
Go to the "Performance" tab and study the amount of available memory.

If there is not enough available memory to run programs, try quitting unnecessary and resource-intensive applications classical method or by terminating their processes on the manager tab of the same name.

Terminating processes can close applications running in the background, which is not always possible without a task manager, and lose unsaved data.

We go to the "Startup" tab, which appeared in windows 10, and uncheck the boxes opposite the programs that do not need to be launched together from the OS.

In the "Processes" tab, we identify resource-intensive applications and, if necessary, terminate them, or use the paging file to increase the amount of virtual memory for windows 10.

Be sure to check the tabs open in the browser: with a large number of them, especially if videos or pages full of multimedia elements are open, sometimes even a large amount of memory is not enough to store all the data in RAM at the same time.

swap file

In order to optimize windows work developers have implemented a caching mechanism, due to which programs that have not been used for a long time and their data from high-speed memory (RAM) are moved to virtual memory (paging file), thereby freeing up unused computer resources. Thus, even if you do not have enough memory to run several programs at the same time, Windows 10 will move data that it does not currently need from RAM to the hard drive.

Maybe the disk is damaged

If the suggested actions did not help solve the problem, but you don’t want to reinstall windows, check the system partition for bad sectors. Perhaps the problem lies in the fact that pagefile.sys is located in a damaged area of the hard drive.

We call the menu "Win + X".
Select the option shown in the screenshot from the drop-down menu.

Type "sfc /scannow" to check for system file corruption.

Whatever the result, enter the sequence of commands and restart windows 10.

As a result, the system will correct the detected errors and, with a high degree of probability, will save the work from the annoying message that there is not enough memory on the PC.

(Visited 14 055 times, 1 visits today)

Every now and then programs stop responding Or are they completely closed without any participation on your part? Tired of waiting for the menu to open in the app? tortured messages: « Not enough memory "? Don't know what to do? Let's find a solution together.

The simplest, but, unfortunately, often unacceptable way to avoid the appearance messages « Not enough memory ” - this is not to run a large number of programs at the same time. Or, at the very least, do not co-launch applications that consume maximum volume random access memory .

It is also possible increase swap file size which will increase stability operating system , but will have a negative effect on program speed.

To increase virtual memory , follow the path Start → Control Panel→ System → Additional system settings→ Advanced tab → Performance item - Options button → Advanced tab → Change button. Uncheck the box " Automatically choose swap file size". It is better to place the paging file on a different hard drive from where it is installed. Windows 7. Now let's talk about amount of virtual memory . If you are not a born gamer, then it is reasonable to set the size of the swap file to 1.5 times larger than the size random access memory. If games are everything to you, then this figure will increase to 2.5.

Not even advice, but a wish. If possible, buy additional bar RAM .

Be sure to check to see if memory leak as a result of incorrect operation of one of the applications. If message « Not enough memory "is called by the same program, update it to the latest version or even switch to a similar software product from another developer.
In order to find the program that is causing the crash, open the Task Manager (key combination Ctrl+Shift+Esc) and go to the Processes tab. Arrange the applications by the amount of memory used (click on the field Memory (Private working set).
Then follow the path Start → Control Panel → Administration→ double click to open " Event Viewer". Double click on " Application and service logs". Browse application errors (context menu→ Open ).

Check your computer for memory problems. Run memory checker Windows 7 . Why follow the path Start → Control Panel → Administration → Windows Memory Checker, or press the key combination Win+R and enter in command line mdsched. In the window that opens, select when to start testing memory. After the computer is restarted and memory diagnostics will run, by key F1 can be called additional settings testing. In order to start testing, click F10 .

As you can see, nothing complicated. Successful work!

operating room Windows system often annoys users with many small errors. "Lack of virtual memory" is one of them. Usually the computer starts to “slow down”, then an error message appears that your virtual memory is not enough. In this article, we are going to explain what is causing this error and how to fix it once and for all.

What is virtual memory?

Virtual memory, also known as the swap file, is a file on your hard drive that Windows uses in addition to physical memory (RAM) when needed. For example, when you run an application or process that random access memory (RAM) cannot handle, virtual memory comes to the rescue. Typically, the page file is 1.5 times the amount of physical memory, so if the system has 512 MB of RAM, then the page file will have a size of 768 MB.

Why does the "Not enough virtual memory" error occur?

There are two things that tend to cause this error:

You do not have enough RAM;
One or more applications on the computer are "buggy" and causing a memory error.

Asfix it?

Getting rid of this error is not that difficult, especially if it happens because your laptop is running out of RAM. If so, all you need to do is add more physical memory to speed up your computer. If you cannot do this immediately, you can increase the size of the swap file. Here's how to do it:

Right click on "My Computer" and go to "Properties". Click on "Advanced" or "Advanced system settings" (If you are using Windows 7 or Vista). In the new window that opens, go to the "Advanced" tab. Find the "Virtual Memory" section and click on the "Change" button. Select "System Recommended Size" or set the page file size manually. Click OK.

However, if the error is caused by an application error, you first need to identify the culprit. To do this, open Task Manager (press Ctrl+Alt+Del on your keyboard) and go to the Processes tab. Then click on View -> Select Columns. Check the box next to "Allocated memory" and click "OK". Task Manager will now show you how much virtual memory is being used for each application. If you click on the "Allocated Memory" column, the processes will be sorted as they use virtual memory, from largest to smallest. You will be able to see at a glance which app is consuming the most memory.

You will be able to find the processes that run applications like firefox.exe, it's fairly obvious.

If you are not familiar with processes, download a program called Process Explorer. It does not require installation - all you have to do is run the executable. Basically, this program is a much more convenient alternative to the Task Manager. After launching the program, click on View -> Select Columns. Then go to the "Memory Process" tab and check the checkbox next to " virtual size". Click the OK button. Like the Windows Task Manager, you can sort the results. Each process will have information about the application it is running. If you need even more information about a process, hover your mouse over it.

Now that you know what program is causing the lack of virtual memory, you can try to fix it. First of all, try updating your software - updates usually fix bugs. If that doesn't work, try uninstalling and reinstalling the app. If that doesn't work, try contacting software support or searching the internet for that particular software issue.

Is the question still relevant for you, how to make my computer faster? Read our other tips and tricks on how to speed up your computer.

We remind you that service center ASKAND provides services and model range such manufacturers: APPLE, ACER, ASUS, COMPAQ, DELL, EMACHINES, HEWLET PACKCARD, ROVERBOOK, FUJITSU, MSI, IBM, LENOVO, LG, SAMSUNG, SONY, TOSHIBA.

When working with heavy programs, many Windows 10 users periodically encounter a system message about low memory on the computer. What does this warning indicate, what memory in question, and what needs to be done in this case, we will talk in this article.

To free up memory for the normal operation of programs, save the files, and then close and restart all open programs.

Naturally, the message refers to the system's RAM and virtual memory, and not hard disk space. Some of the most common causes of low memory warnings include:

Too many programs or processes running
There is not enough random access memory (RAM) on the computer for normal operation
Incorrect paging file configuration (or completely disabling it)
The system disk space has run out, which prevents the dynamic paging file from growing
Memory leak in one of the programs

The amount of RAM and the number of running applications

The first and second reasons, I think, do not require special comments and are closely related. The solution is to increase the amount of RAM on the computer by purchasing an additional memory bar (on modern system for comfortable work should not be less than 4 GB of RAM) and / or close unused resource-intensive applications (how much memory a particular process / program consumes can be done using the task manager).

Swap file setup

As you probably know, the swap file is an extension of the computer's RAM and is hidden file pagefile.sys on the system drive, where Windows dumps the data of unused (but running) programs from RAM.

By default, the size of the paging file in Windows 10 is managed by the system (and this is normal). There are MSFT recommendations (simplified) that in modern Windows it recommends setting the initial (minimum) paging file size equal to the amount of physical memory (RAM) installed on the computer. The maximum paging file size is limited to three times the amount of physical RAM. However, these recommendations are often violated by the users themselves or by all sorts of "system optimizers". In the event that the amount of available space in this file is insufficient to accommodate new data pages of running applications, Windows may issue warnings about insufficient computer memory.

The paging file on disk is, by definition, slower than RAM, so the more data stored in it and the more actively it is used, the more the system will slow down from the user's point of view. Naturally, the decision to add RAM will be better than increasing the size of the swap file

To avoid the warning, check that the paging file is enabled and change the minimum and maximum size of the paging file.

Not enough hard disk space

Check that there is enough space on the Windows system drive to accommodate the paging file of the sizes indicated in the paragraph above. Everything, of course, is individual, but in the modern user edition of Windows, when there is less than 8-10 GB of free space on the system disk, this is not very good.

Memory leak

You can find the process with leaked memory using the task manager (Ctrl + Alt + Del), to do this, go to the tab Details and sort processes by column Memory.

See if there are programs with abnormal memory consumption in the list (naturally, you need to be aware that there are also resource-intensive applications in nature: games, graphics and video editors, a browser, etc.). Try updating/reinstalling/deleting such a program (everything is very individual here, perhaps a bug with a specific program has already been described by the manufacturer or on a specialized forum). In some cases, it is worth checking if it is enabled (this feature sometimes helps to save a lot of RAM).

In the event that a memory leak is associated with one of the drivers or system components, the utility will help you identify the problematic driver. poolmon(the technique is described in the article).

“The application could not be installed / updated because the device memory is full” - many Android users have seen such an inscription more than once. How to make up for the lack of MB and whether you need to do it at all, read our article.

How to check the amount of free memory

If you see a message about the lack of memory, the first thing to check is its (memory) state. Perhaps some update or downloaded file weighed more than you thought, and now the system really does not have enough free megabytes to complete the specified procedure. So, to check the state of the phone's memory:

If megabytes are really not enough, let's clean the phone from unnecessary data. If enough, we will look for the cause of the problem and fix it.

How to free up more memory on your device

If there is too much information stored on your device, the easiest option for clearing memory is to move some of the files to another device. It is not difficult to do this, you just need to transfer the taken photos and videos, downloaded files, etc. to them. We are mainly interested in the following folders:

But what if they are all empty, and MB is still not enough? There are several options for freeing up additional memory, and we will dwell on each of them separately.

Cleaning the cache (Dalvik cache, general and individual applications)

On any device that has access to the Internet, there is a cache - an intermediate buffer in memory that provides quick access to temporary files. This allows you not to load the page completely with each access to it, but to store part of the data in the system memory and retrieve it on the first request. On the one hand, this is convenient, because The site loads quickly, no matter how low the connection speed is. On the other hand, we have memory clogged with unnecessary files and slowing down the system itself. Therefore, even if you have not yet encountered the error discussed in the article, you should clear the cache on Android at least once a month. By the way, you can do this in three ways:

Delete all cache stored on the phone

To do this, go to "Settings", open the "Memory" section and look for the "Cache" item in it. We click on it and agree to the removal. A couple of seconds, and the treasured megabytes were released on our phone.

Delete the cache of a specific application

If you are only missing a few MB, it is not necessary to erase all temporary files. Sometimes it is quite possible to get by with the cache of some resource-intensive program. To do this, you just need to open the "Settings" menu, select the "Application" item and find the application of interest to us in the list provided. Open it and look for the "Clear Cache" button. We click on it and observe how the amount of free memory increases by the treasured megabytes.

Wipe Dalvik Cache by Putting Your Device in Recovery Mode

Dalvik cache is a temporary compilation of application code that is stored as executable files. Removing them does not cause any harm to the performance of the gadget. Therefore, to free up a few extra MB in this way, we do the following:

We turn off the phone.
We launch it in recovery mode(button combination for different devices will be different, you can find it out from the instructions or on the official website of the manufacturer).
In the menu that appears, first select the item Wipe cache partition, and then alternately - Advanced Options and Wipe Dalvik Cache.
After the unnecessary files are deleted, turn off the phone and restart it in normal mode.

Note! In Recovery mode, the touch display is disabled, the menu is navigated using the volume buttons, and the selection is made with the start button.

However, you need to understand that by deleting the cache, you do not get rid of it forever. Temporary files will be re-placed in the device's memory as soon as you go to the site or open the application.

Removing unnecessary data from the sections "Downloads" and "Other"

Files downloaded from the Internet, as well as data that the system cannot attribute to any of the prescribed categories, also take up a lot of space. You can get rid of them different ways. If you know in which folder or folders the download is being made, open them and clean them manually. If not, use the following diagram:

If you are afraid to delete something you need, but you cannot identify the file by its name, click on it and it will open for viewing.

Cleaning with utilities

If you do not want to deal with phone settings, you can clear the cache and much faster. Special applications will help you with this, you can download any of which in Play market. To start scanning the system, click the start button. The system will analyze all the files stored on the phone, find among them temporary and no longer needed. Then click on "Clear" or "Delete" and get rid of the garbage on your gadget.

The most popular cleaning applications are:

Clean Master is one of the most popular memory cleaning and virus protection apps. It has extensive functionality and allows you to free up not only ordinary memory, but also RAM.
Ccleaner quickly finds obsolete and residual files, allows you to uninstall several applications at a time, quickly stops running tasks, and also puts background programs into hibernation mode in 1 click.
noxcleaner. The program is interesting in that it independently removes any third-party applications that have not been used for more than a month, and itself weighs very little (8 MB, version 1.2.5).

Also in the Play Market there are various "Application Managers" that help you manage programs (install, remove, move, etc.) on your phone. However, for full functioning, many of them require root rights, which can adversely affect the security of the gadget.

Removing apps

the lion's share internal memory phone is occupied by third-party applications and games. Therefore, if you are thinking about cleaning your device, start with them. As a rule, users erase programs that have become unnecessary according to a simplified scheme: they pinch the icon on the home screen or in the general menu, and then drag it to the trash. Or open the application page in the Play Market and click the "Delete" button. However, the cache and some entries after such deletion may remain in the device's memory, settling there as a dead weight. Therefore, if you want to erase the application without a trace, we suggest using the following method:

Done, on the device, neither the application itself nor the files related to it are anymore. Data account are stored in your Google cloud profile, so if you want to reinstall the game, your progress will not be lost.

Transfer applications to external storage

If there are not enough free MB, and you don’t want to delete applications, you can try transferring them to an external drive. We’ll say right away that this option does not work for all firmware and not for all programs. However, why not try. To make a transfer:

If there is no such button, it means that the developer has intentionally prohibited installation anywhere other than internal memory. And you can free up space by transferring only if the user has root rights.

Manual cleaning with root rights

We consider it necessary to start talking about this method with a warning:

If something goes wrong during the installation process (download a virus-infected application, make a mistake in the actions, etc.), then there is a risk of getting "" instead of a phone. And devices with superuser rights are not covered by the service warranty. Therefore, you perform further actions at your own peril and risk.

To get root rights, select the application that suits your phone model from the list below and install it:

360 root.
Baidu Root.
DingDong Root.
Romaster S.U.
Root Dashi.
root genius.
Root Zhushou.

Run the program, after which you can delete through it (or by the usual deletion described above) system applications, files from the data folder and other components that are forbidden to be deleted.