Low power gas heating boilers. Low power floor standing gas boilers

The boilers are equipped with a microprocessor modulating power control system (57-100%), premixed burners, which guarantee minimum NOx (less than 25 ppm), CO and CO2. The boilers are equipped with a full range of interlocks and safety systems, built-in circulation pump, built-in storage tank-accumulator (for dual-circuit models). Heat exchangers of Indurance boilers have a 5-year warranty.

Gas boilers low power are often used in residential buildings. Due to the peculiarities of installation, they are divided into floor and wall. To provide housing hot water and for heating the premises, a household double-circuit gas boiler is used. In such a device, the boiler, the boiler itself, the burner and the automation system are connected. This is almost a miniature boiler room in the house.

Low-power gas boilers are installed quickly, they do not need a separate room, they are mounted on the floor or wall. Floor standing boilers more powerful, better suited as heating devices... When choosing which floor-standing double-circuit gas boiler to buy, it is recommended to focus on the material of the heat exchanger: cast iron, copper or steel. The best heat conductor is copper, but it is more expensive. A household double-circuit gas boiler with a built-in boiler is suitable for country house... Such a model has in stock large quantity hot water, can work at low head and less scale forms in it.

Double-circuit household boilers They also differ in the type of gas burner, which can be atmospheric with air supply by gravity or can be pressurized. With this option, air enters the combustion chamber forcibly, using an electric fan. The second option is more economical, as it has a higher efficiency.

You can buy a floor-standing double-circuit gas boiler in a specialized organization, where specialists will help you choose the most suitable model and install a hot water device in the house.

Model range of gas boilers "Indyurans"

Distinctive features of Indurance boilers: Indurance boilers in standard configuration contain:
  • beautiful design
  • compactness (width - 46 cm)
  • no soot formation process
  • high operating efficiency (efficiency not lower than 95%) in all combustion modes
  • reliable operation in any water (permissible hardness up to 6 mg eq / l)
  • low content of nitrogen oxides NOx (less than 25 ppm)
  • reliable operation both on natural gas and on liquefied propane (maximum gas pressure - 3.2 kPa, minimum - 1.2 kPa)
  • modulation power control mode (100% - 50%)
  • forced gas-air mixture supply system and smoke exhaust system with built-in fan
  • frequency regulation by the built-in fan
  • built-in circulation pump with bypass ring
  • built-in storage tank for hot water (75 l for models EBP110 and EBP175)
  • self-diagnosis unit with display panel
  • power supply from 220 V, 50 Hz
  • maximum water pressure in the boiler - 0.21 MPa
  • boiler outlet water temperature - from 60 ° С to 105 ° С
  • reliable operation in the temperature range environment from 4 ° С to + 60 ° С
  • built-in frost protection
  • quiet operation
  • microprocessor control unit for boiler operation control
  • frequency controlled fan
  • electronic spark ignition unit with flame sensor
  • circulation pump with bypass
  • modulating automatic gas valve
  • water flow switch
  • boiler water level switch
  • thermomanometer
  • maximum water temperature switch
  • safety valve for maximum water pressure in the boiler
  • factory fitted stainless steel burner block
  • bronze heat exchanger headers
  • the combustion chamber is insulated with a proprietary lightweight cast refractory with working temperature up to 11000С
  • built-in storage tank 75 l for hot water (models EBP110 and EBP175)
  • water level switch storage tank(models EBP110 and EBP175)
  • DHW plate heat exchanger (models EBP110 and EBP175)

At high efficiency boilers "Indyurans", operating costs are minimal. Perfect design, ease of operation and low costs guarantee savings! All equipment is certified by Gosstandart, Gosgortekhnadzor of the Russian Federation and approved for use on the territory of Russia
Boiler production is ISO9002 certified

Are you going to buy an efficient gas boiler that can provide heat in the most severe frosts? There are many factors to consider when choosing equipment for your home. What's the best option? What are the most important criteria? Owners of both private houses and apartments have to think about solving this problem.

Agree, it's a shame to pay twice and in the end get an insufficiently functional boiler that is not able to heat Vacation home with the onset of cold weather. Therefore, before choosing a gas boiler in a store, you will have to weigh the pros and cons. Otherwise, you can take a model that is far from suitable.

We will help you determine the main criteria that radically affect the choice. Helpful hints and important nuances set out in our article. Photographs and a selection of videos with advice from experienced heating experts are provided to help the homeowner.

The absence or constant interruptions of centralized heating and hot water supply force the owners of cottages and city apartments to create.

Their main element is a boiler, which, by burning fuel, heats the coolant for the heating system and water for domestic needs.

Choice in favor gas equipment due to the economical use of gas as a fuel. All other options for combustible fuel are more expensive or give less heat at times.

Plus, modern heaters of this type do not require constant supervision. I connected the installation to a main pipe or a cylinder, and it works smoothly as long as there is something to burn.

Usage natural gas Is the optimal solution for heating a private house in terms of fuel costs and operating maintenance costs

However, in order for the gas boiler to function properly and in optimal mode, you need to choose it correctly when buying and regularly service it after connecting.

There are a lot of different functionality and special modules within the models of this equipment. The purchase of a gas heating unit should be approached thoughtfully.

Selection criteria gas boiler quite a few, but the main ones are:

  1. The power delivered by the device.
  2. Layout solution (number of circuits, body type and heat exchanger material).
  3. Place for installation.
  4. Availability of automation for safe operation.

All these issues are closely related. The lack of space for a large unit or the desire to mount a device with an aesthetic appearance in the kitchen forces you to choose a wall-mounted model of lower power than floor version... And the need to heat hot water for the washbasin and shower makes you look for a boiler with two circuits.

When choosing a heater, you should remember about the need to repair it if the workshop for service there is no selectable model nearby, then you should look for another option

The subtleties of choosing a boiler for heating and hot water supply

Modern heating equipment has a stylish appearance, filled with all kinds of sensors and can work in several modes.

Each gas boiler has a burner inside the body and a combustion chamber with a heat exchanger, but there are also models with a circulation pump and other modules.

First, the gas in the burner is ignited using an electronic system or a piezoelectric element. Then, as a result of its combustion in the firebox, water is heated by means of a heat exchanger, which is sent to the heating system circuit.

This is how classic single-circuit models work. To prepare hot sanitary water, you must select or connect a boiler.

Image gallery

Most of us live in a house or apartment small size... Therefore, when installing gas system heating, the owners want the boiler to occupy as much as possible less space... Many people place it in small bathrooms or kitchens. This generates interest in small wall-mounted gas boilers that have minimal dimensions. Most of the attachments have a height of 700 mm, a width of 400 mm and a depth of 250 mm. Consider the models of gas boilers with the smallest dimensions.

One of the smallest wall-mounted gas boilers is the Ferroli DOMIproject Slim F18. It is 655 mm high, 350 mm wide and 230 mm deep. The weight is only 27.3 kg.

This two-circuit model with closed chamber combustion has a power of 18 kW, which is enough to heat an area of ​​up to 150 m². It has a bithermal heat exchanger and is equipped with the "Comfort" rapid hot water function.

The unit is equipped with a digital heating system, a modulating burner that can change power in the range from 6.7 to 18 kW. Thanks to the easy access to the internal elements, this gas boiler is easier to service.

Main characteristics of Ferroli DOMIproject Slim F18:

  • Efficiency = 90%;
  • DHW performance at Δt = 30 - 8.6 l / min;

Ferroli DOMITECH C24

Another compact model from Ferroli is the DOMITECH C24. Its height is 700 mm, width - 400 mm, depth - 260 mm. The boiler weighs 27 kg.

This double-circuit device with an open combustion chamber has a power of 24 kW and is capable of heating a room up to 200 m². It is equipped with a bithermal heat exchanger, as well as multifunctional control and safety control systems. The type of combustion chamber requires the installation of a classic chimney.

Main characteristics of Ferroli DOMITECH C24:

  • Efficiency = 90.5%;
  • country of origin - Italy.

Bosch Gaz 3000 W ZS 28-2KE

The dimensions of Bosch Gaz 3000 W ZS 28-2KE are: height - 700 mm, width - 400 mm, depth - 298 mm. Model weight - 30 kg.

This single-circuit unit with an open combustion chamber has a power of 28 kW and is capable of heating an area of ​​up to 250 m². It is equipped with a multifunction display and ionisation flame monitoring. The heat exchanger is made of copper. The type of combustion chamber requires the installation of a classic chimney.

The main Bosch specifications Gaz 3000 W ZS 28-2KE:

  • Efficiency = 90%;
  • country of origin - Turkey.

Teplovest KGO-18-S BUDGET

The compact hinged gas boiler Teplovest KGO-18-S BUDGET has a height of 700 mm, a width of 350 mm and a depth of 250 mm. The weight of the unit is record low and amounts to 21 kg.

This single-circuit boiler can be equipped with a turbocharged (C) or atmospheric (B) burner. Its power is 20.5 kW, which is enough for heating 150 m². Equipped with a mono-thermal heat exchanger and can easily replace the old floor-standing boiler in the existing system heating.

Main characteristics of Teplovest KGO-18-S BUDGET:

  • Efficiency = 90%;
  • gas consumption - up to 2.1 m³ / hour;
  • country of origin - Ukraine.
Note! Most owners buy small wall models boilers in order to sew them up in niches or hide them in a closet, while forgetting about the need for repairs. Therefore, during the installation process, leave a place for free specialist access to the heating device.

Fondital Antea CTFS 24

One of the smallest hinged gas boilers is Fondital Antea CTFS 24. Its height is 700 mm, width - 400 mm, depth - 250 mm. It weighs 26 kg.

This two-circuit model with a closed combustion chamber has a power of 25.5 kW, which is enough for heating 220 m². The boiler is equipped with two separate heat exchangers: the primary one is made of copper, the second one is made of steel. It has a modern control board and a user-friendly interface.

Main characteristics of Fondital Antea CTFS 24:

  • Efficiency = 93%;
  • gas consumption - up to 2.7 m³ / hour;
  • DHW performance at Δt = 30 - 11.1 l / min;
  • country of origin - Italy.

Ferroli FER EASYtech C 24

The Ferroli FER EASYtech C 24 model has the following dimensions: height - 700 mm, width - 400 mm, depth - 230 mm. The weight of the boiler is 27 kg.

This double-circuit unit with an open combustion chamber has a power of 24 kW and is capable of heating a room up to 200 m². It is equipped with an enlarged bithermic heat exchanger and modern multifunctional control and monitoring systems for safe operation. The type of combustion chamber requires the installation of a classic chimney.

Main characteristics of Ferroli FER EASYtech C 24:

  • Efficiency = 90.5%;
  • DHW performance at Δt = 30 - 11.1 l / min;
  • country of origin - Italy.

TERMET MiniMax DYNAMIC 24 kW (turbo)

The compact boiler TERMET MiniMax DYNAMIC 24 kW (turbo) has a height of 700 mm, a width of 360 mm and a depth of 300 mm. The weight is 28 kg.

This double-circuit unit with an open combustion chamber has a power of 24 kW and is capable of heating an area of ​​up to 200 m². The primary heat exchanger is made of copper, the secondary one is made of stainless steel. The boiler is equipped with a modulating burner and the necessary safety monitoring systems. The type of combustion chamber requires the installation of a classic chimney. Main characteristics of TERMET MiniMax DYNAMIC 24 kW (turbo):

  • Efficiency = 91%;
  • DHW performance at Δt = 30 - 11.4 l / min;
  • gas consumption - up to 2.7 m³ / hour;
  • country of origin - Poland.