All from a folding bed. From a folding bed - a chair What to make from an old folding bed

The health status of the bird is determined by the early organs, and if everything is normal, they are also sent for sale. The gallbladder is cut from the liver; the heart is cut and blood clots are removed; the stomach is cut and the membrane is removed from the inside; paws are immersed for 2-3 minutes in hot water or singe, after which the skin is removed and the claws are trimmed; the heads are singed or scalded, the feather stumps are removed, the eyes are taken out and the beak is cut off; scallops are scalded, the film and feathers at the base are removed using salt, and if there are blood spots, they are soaked; the necks and wings are cleared of stumps.

The bird has been domesticated by humans for a very long time; over the past centuries, enormous experience in its cultivation and maintenance has been accumulated. It is simply impossible to cover everything in one article. Breeding work The development of new breeds and crosses does not stop. Work continues on the selection of feed compositions and the introduction of new light, temperature and humidity regimes. In the near future, apparently, the bird will be even more precocious, hardy and prolific.

A.I. GERASIMOV

An old folding bed is a treasure for a craftsman

Metal tubular elements and connections from old folding bed frames can become the basis of many homemade devices. Such frames with worn out canvas are often taken out for

sent to scrap metal or landfill. As a rule, frames are made of duralumin tubes, which can be easily processed with home tools (hacksaw, drills, files, etc.). It is easiest to assemble from such parts with some modifications folding tables, armchairs and chairs. These products are lightweight, take up little space when folded, are convenient for transportation in public transport or in personal cars, are quickly brought into working position and quickly dismantled. It is advisable to use such devices in garden plots and dachas, especially since you may not find the necessary devices in stores, and they are very expensive. The peculiarity of homemade products is that due to individual distinctive characteristics and appearance their devices, as a rule, are not “privatized” by outsiders, who often penetrate private property, while purchased standard products usually end up with new “owners”.

Using the principles and solutions outlined below, you can assemble with your own hands the necessary useful homemade products. It is hardly advisable to copy devices, since something can always be changed and improved. Therefore, you should initially sit and think, design product options on paper, choose acceptable technical solutions taking into account the available tools and the possibility of purchasing or ordering some parts externally and only then starting work.

Folding table

In Fig. Figure 1 shows a tubular frame of a folding bed (for adults) with the tarpaulin and springs removed, securing the canvas along the perimeter to the top of the frame in increments of about 70 mm. Every

Folding beds are a versatile item, and once they reach the end of their useful life, there are also many options for use. However, the prevalence of the named object is increasingly spent, since it is superseded by new designs. Indeed, in modern world More and more advanced products are becoming available.

REFERENCE! In order not to give in to fashion, you can discreetly decorate old furniture, thereby adding some individuality to the home interior.

In this article we will look at the most popular methods that even an inexperienced master or beginner can handle.

What can you make from an old folding bed?

First, let's look at the simplest method of transformation, namely into a regular bench; even one person can assemble it, and the structure will be supported by about two people. To build a structure, you must perform the following steps in a specific order:

1. First of all, the main part of the device is cut out. She won't be needed anymore.
2. Next, you should arm yourself with plywood to form the back and seat. To give maximum strength and reliability, it is worth fixing each part with a fastener.
3. This way, you should have an updated bench that will last for some time. You can also take it with you into nature or just to Vacation home. This recommendation is explained by the fact that the device folds easily, which is so important when using the structure outdoors.

In addition, you can just as successfully create a sun lounger yourself. For this it is desirable:

1. As well as in previous version It is necessary to liquidate the main part.
2. Then you should purchase bars and process them sandpaper. This is necessary in order to eliminate uneven surface and form a smooth one. Thus, users will be guaranteed security.
3. The next step is to proceed directly to assembling the structure. Namely, the connection of each part with each other. This is done using special fastenings. These can be various nuts, bolts, screws.
4. The activity itself involves the placement of each bar product - in a certain order. The main thing is to maintain distance. It should not be too narrow or wide.

Thus, from an initially old and unnecessary folding bed, you can create a completely new and exquisite thing that can not only decorate the interior of the room, but also come in handy in a really necessary situation. So, as mentioned above, the unit is quite convenient to use outdoors. However, in this case, processing is mandatory. This is explained by the fact that there is a high probability of damage due to the mass of various insects and high humidity.

When does a known product expire? universal item– folding beds, it’s time to invent new option its use. Previously available in almost every home, over time the lightweight folding bed is inferior to its more modern counterparts. Improved products conquer their owners, but what can be done from old folding bed?

To keep up with fashion trends, everyone is able to discreetly decorate old, used furniture, thereby adding individuality and comfort to the home interior.

This article is dedicated to the simplest and accessible ways, which both a novice master and a novice designer can do.

New life for an old folding bed

The simplest way to transform an old cot is to turn it into a regular bench that can support two people. One person can assemble such a structure by following simple steps according to the following instructions:

1. The first step is to cut out the main center part of the former clamshell because it is no longer needed.
2. The seat and backrest are cut out of plywood specially selected for its thickness. To make the new structure as strong and reliable as possible, careful fixation of each part using fastenings will allow.
3. If everything is done correctly, the end result should be a brand new bench that can last for a long time. for a long time. This product can easily be taken with you on a picnic, outdoor recreation, or transported to a country house. It folds and unfolds easily, which is very appreciated when choosing a bench for outdoor relaxation.

In the same simple way, you can easily assemble a new lounger. To do this you will need:

1. To begin with, also cut off completely old base- the central part of the folding bed.
2. Select the bars and thoroughly sand them. In this way, unevenness on the surface is completely eliminated, and it becomes smooth and safe for everyone who will use the future lounger.
3. After preparing all the parts, the next step begins - the complete assembly of the new structure. To begin with, using special fasteners, each individual part to each other. Screws and screws, bolts and nuts can be used as fasteners.
4. It is important to strictly follow the assembly instructions - correctly place each prepared block in its own specific order, maintaining the required distance, which should not be too narrow and not too wide.
5. After complete assembly, they are treated with construction varnish, which allows the structure to last for many years. This method can guarantee protection against rot and minor surface damage.

Therefore, with this simple method you can turn an old and unnecessary folding bed into a completely new, cozy and useful thing, which will both decorate the interior of the house and come in handy in some unexpected situation. For example, it will be indispensable on a trip to nature. By the way, in this case, it is necessary to treat the surfaces, as this will protect the updated folding bed from minor damage, the influence of high humidity and insects.

We will not necessarily talk about the one that you have and continues to serve you, helping you out when relatives or distant guests come over. If you still need it, let it stand in the closet or be on the mezzanine. But it’s no secret that many throw them away as unnecessary - how many of them can you find around holiday villages, former pioneer camps or recreation centers. But the material of the tubes is durable, and the design of the folding beds is, as they say, durable. So I propose to give them a second life; This will be especially useful for owners of dachas or garden houses, and just elderly people who go out to breathe in nature, in the nearest green corner. I mean a light, comfortable folding chair.

Making one from a clamshell is easy and accessible to almost everyone. To do this, you only need a hacksaw and any drill, and even a metal rod (or steel pipe).

FROM THE EDITOR:

If you use this solution and make several chairs, do not throw away the sawed-off middle parts of the folding beds. Turn them over with their sheaths up: these are ready-made supports for film coverings of the greenhouse. By the way, they are also foldable and lightweight, which is important for gardeners and gardeners.

The idea is this: cut the folding bed so as to remove its middle part (along with the leg), and connect the “head” and “leg” parts again to get something like a chaise lounge.

First, we mark on the frame tubes the places where we will cut with a hacksaw. We choose them based on the desired size of the future seat. Before or after sawing, we prepare an insert about 80 mm long from a metal rod (the diameter of the insert should allow it to fit tightly inside the tubes of the clamshell frame). At the place of the cut, stepping back from it by 30...40 mm, we drill in one of the tubes through hole for a future rivet or M5 screw; We drill the same hole in the insert. Then we connect them and fasten them with a screw. After this, we slide the end of another joining tube onto the insert and drill them together. Finally, we fasten the tubes with the insert with rivets or screws with Grover washers and nuts. The chair frame is ready.

A - points for sawing the tubes of the “head” part, B - “foot” part.

1- clamshell frame tubes, 2- insert (steel rod or tube; diameter corresponds to the inner diameter of the clamshell frame tubes).

1 - “head” part of the folding bed frame, 2 – joint insert, 3 – folding middle part of the lounger panel, 4 – rivet, 5 – “foot” part of the folding bed frame.

1 - frame, 2 - seat panel.

If the folding bed still has the lounger panel, you can leave it for the chair. It is enough just to remove the spring stretchers on the freed former middle part and, accordingly, bending the wire inserts of the sunbed, fold the middle part of the panel in half and place it on the seat. If the sunbed cover is worn out or missing, it is better to sew a new one from awning or mattress fabric or canvas - any dense material you have. In this case, the panel can be removable (see figure) or directly sheathed around the frame tubes.