How can you remove traces of scotch tape. How to wash traces of adhesive tape on various surfaces
I think that the problem of sticky spots left from adhesive tape on plastic is not familiar to me alone. I wonder how to quickly and with your own hands remove the adhesive tape and sticky residues from it? I propose to figure it out and solve this problem once and for all.
Removing tape from smooth surfaces: 10 options
Before you wash the plastic off the tape, you need to remember a few nuances:
- Try to act as quickly as possible - the longer the adhesive tape is on the smooth surface, the more difficult it will be to remove marks from it.
- Do not use metal brushes or scrapers - they leave small scratches behind.
Tools at hand: 7 options
To remove tape from plastic, you can use simple and always available tools:
| Photo | Instructions |
 |
Means 1. Scotch tape
Surprisingly, but removing the remaining adhesive tape will help ... adhesive tape:
|
 |
Means 2. Oil
Any vegetable oil is suitable: sunflower, burdock, mint, linseed, rapeseed, etc.:
|
 |
Remedy 3. Rubbing alcohol
It will help not only remove the remaining glue from the plastic, but also remove yellow spots on it. It is enough just to moisten a cotton swab in alcohol and treat the surface with it.
|
 |
Tool 4. Eraser
A regular stationery eraser will handle even old sticky dirt on a plastic surface:
|
 |
Means 5. Soap solution
You can remove fresh traces of scotch tape with a hot soapy solution:
|
 |
Means 6. Dishwashing liquid
It will help wipe off the tape not only from the plastic, but also from the car. Proceed in the same way as indicated in the instructions for use of the soap solution. |
 |
Means 7. Hairdryer
You can try removing old masking tape by heating it up. For these purposes, it is impossible better fit hairdryer.
|
Special aids: 3 examples
If you didn't manage to remove the traces with the usual improvised means, it's time to use heavy artillery. She is potent substances that can be purchased in the store.
| Photo | Description |
 |
Sticker remover (price from 130 rubles)
Produced in various forms(in a spray can, in the form of a pencil or liquid). Despite its affordable cost, it effectively helps remove adhesive tape residues from any substrate. |
 |
Kiehl tablefit (price from 800 rubles for 750 ml)
Copes with a variety of stubborn dirt. It must be applied to a napkin or rag, and then wiped off the sticky residue from the adhesive tape. |
 |
Taygeta S-405 (from 414 rubles for 500 ml)
Sold in a convenient spray bottle. It is applied to the remaining adhesive tape, removed after 15-30 seconds. |
Outcomes
Now you have learned how to remove plastic from the tape. You can try one or several methods at once and return the plastic surfaces to a clean look.
Do not forget to watch the video in this article - you will learn a few more effective methods... If you want to ask a question or clarify something, write in the comments.
From the article you will learn:
Ordinary scotch tape or its paint analogue is often used for household and construction work.
It is a narrow or wide film tape (paper, fabric - in the case of masking tape) on which adhesive composition from one or both sides.
Depending on the thickness and characteristics of the adhesive, adhesive tape can be weakly and strongly fixing as well as adhering instantly or requiring time to set to the surface.
Unfortunately, this useful working material has a significant drawback - traces after its use are poorly removed from some surfaces. One of these surfaces is plastic, and therefore the problem of cleaning plastic windows from traces of adhesive tape is quite relevant today.
Removing glue residues from plastic frames complicates yet another circumstance - the aesthetics of the structure and a change in its color should not be allowed under any circumstances. Proven methods available to every owner help to successfully cope with the task.
Method number 1
If the adhesive tape has recently been removed from the plastic surface and the remnants of the glue have not yet hardened, then glue to the stained areas new tape, press it down well, and then pull it off with a quick motion. To completely eliminate traces, the procedure will have to be repeated several times - but this method is guaranteed not to damage the plastic surface. In case of failure, you can use a regular clerical eraser to erase pencils and remove the adhesive from the tape with it, simply erasing it.
Method number 2
A cleaner that is safe for plastic windows can be prepared from household tools at hand. Have to take regular baking soda and dilute it with water until the consistency of thick sour cream. This composition is applied to the frame and left for 2-3 minutes, and then removed with a cloth soaked in water abundantly. If the remnants of the adhesive tape are not cleaned the first time, then the mixture is applied again. Just like the first method, this procedure allows you to effectively remove ugly glue marks without worrying about the loss of aesthetics of the design.
Method number 3
If you have to decide how to wash the plastic windows from the adhesive tape removed a long time ago, and the dried glue has already firmly eaten into the surface, then you can help neutral alcohol-containing composition: vodka, alcohol solution, colorless lotion. They should be used to saturate a sponge or a lint-free cloth and gently wipe the contaminated area. Before starting work, it is recommended to test the solution on a small area hidden from the eyes - not all types of plastic can tolerate the effects of alcohol (it can change the color or deform the surface).
Read also: Window ventilator for plastic windows. Types and possibilities
Method number 4
To get rid of the remnants of glue on the plastic window will help and household products without aggressive components... It is better to choose formulations in the form of a fine powder, gel or solution, since substances with large crystals can leave scratches. A sponge or washcloth is moistened in the composition and the frame is wiped with it, increasing the pressure in areas with glue residues.
Suitable for cleaning windows and dish gel, as well as glass cleaner spray. Spray should be sprayed onto the glue spot and wipe off after 5-10 minutes. After using the spray, the frame must be rinsed with clean water.
Method number 5
You can use specialty chemicals sold at hardware stores or hardware stores to peel off adhering tape. As a rule, they are issued in the form of aerosols and convenient for work, however, they are quite expensive. After spraying the substance over the surface with tape, a reaction occurs that dissolves the glue, and the tape is removed without any difficulties. Remnants of dried glue also dissolve quickly and to remove them, you just need to wipe the plastic with a regular cloth.
Manufacturers promise that their products are safe for window plastic, but still recommend checking the absence of a reaction to small areas before work.
Method number 6
Enough effective means for cleaning adhesive tape are considered white spirit and pure gasoline... They quickly dissolve the adhesive base and clean the plastic, but they can also damage its surface. Not all frame types can withstand this kind of contact. In order to check whether similar solvents can be used in your case, wipe an inconspicuous part of the window of a small area with them and watch the reaction. If after 5-10 minutes the surface has not changed color and shape, then the agent can be applied to the entire window.
Method number 7
From the windows from heat resistant material adhesive tape and its traces can be removed by heating the frame with a hairdryer or household steamer... It is not necessary to warm up the entire window, as pulling on the tip that has come off will remove most of the adhesive tape. The marks left after removal heat up quite a bit and are washed off with a sponge or damp cloth.
Read also: Accessories for plastic windows. What are they ranked among?
Blitz-survey: Do you lubricate the fittings of your plastic window?
Poll Options are limited because JavaScript is disabled in your browser.
For non-heat-resistant plastic, there is a more gentle version of this procedure: a cloth soaked in hot water is applied to the adhering tape. The material rolls up in several layers and squeezes well. To obtain the desired effect, the "compress" will have to be applied to the adhered area 2-3 times. If this effect is not enough, then use rubber spatula or with a scraper.
Method number 8
To cleanse plastic window from scotch tape, fit and regular liquid oil: sunflower, linseed, olive, etc. With an abundant layer of oil, you need to lubricate the surface along with scotch tape, and after 10-15 minutes remove the tape or its traces with a rag or sponge. Residual oil is rinsed off the frame with soapy water. If you use aromatic oil instead of edible oils, then the room will smell pleasant for a long time without any fresheners and deodorants.
The method is absolutely safe for any type of plastic.
Method number 9
The traditional mechanical method of getting rid of plastic windows from complex contaminants has not been canceled, especially if they have existed for a long time and have strongly eaten into the surface.
One of the options for mechanical cleaning is to gradually separate the remaining adhesive tape by hand, but this work will take a long time and will not rid the material of glue traces.
Another option suggests using a sponge with a cleaning layer, rubber scraper and laundry soap... A coarse layer of damp sponge is lathered and rubbed over the frame. The surface should be completely moistened with soapy water, which is left for a short period of time (5-6 minutes). Using the sharp part of the scraper, you need to pick up the tape and gradually separate it from the window. Repeat wetting with soapy water as necessary.
After wiping off the adhesive tape, the remaining glue is removed by wiping the frame with the hard side of a soapy sponge. Complete cleaning requires considerable effort and patience.
Method number 10
Enough in an original way getting rid of scotch residue is using toothpaste... In this case, to the surface plastic frame a layer of toothpaste is applied and kept for 5-10 minutes. Then, the frame with the dried paste is thoroughly wiped with a dry cloth and washed with soap and water.
Double-sided tape is a tape consisting of a main part (foamed or polypropylene) and an acrylic adhesive that is applied to both sides of the base. In some cases, the base can be foil-coated or metallized, which increases its strength. After using such fastening material, situations arise when it must be removed without damage.
When removing such a fixing material, it is necessary to take into account the fact that this object is very tightly attached, and this leads to the fact that it becomes very difficult to remove it completely, and without the use of additional means, it is impossible.
The methods associated with the removal of this type of adhesive tape directly depend on the type of plane on which it was fixed.
Removing double-sided tape by heating
Heating is good for separating the main part of the adhesive, however, it is recommended to use this method only if the surface under the adhesive is heat resistant. Otherwise, serious damage to the object may be sustained instead of the cleared area.
For the heating procedure, a regular hair dryer, which is used for hair styling, is quite suitable. First, there is a heating and subsequent softening of the glue mass. After that, the remnants of dirt can be easily removed with a cotton cloth, for this you need to rub the desired place without effort.
Destroying footprints with vegetable oil
With vegetable oil, you can easily destroy the adhesive residues that were not removed with the main part. The method of using vegetable oil depends on the location of the area where the glue remains. If the surface was horizontal, then the oil just needs to be poured onto the required area, but if the material was glued on a vertical plane, then a napkin, previously soaked in oil, should be applied to this place. It takes time for the oil to interact with the adhesive (about 15-20 minutes). After the time has passed, the remaining glue can be easily removed with a napkin. In order to remove oil stains, the contaminated area should be washed with soapy water, then washed clean clean water.
Using a stationery eraser
Using a regular stationery eraser can easily help in removing any remaining residue. To do this, you need to gently rub the residual adhesive layer with an eraser, then simply remove the resulting glue lumps. Do not press too hard when rubbing, as this may damage the surface.
Using a drill for cleaning
To remove sticky marks from the tape, you should use a specialized drill attachment, which is made of durable rubber. A drill is good if the contamination is spread over a large area. When using a mechanized device, you do not need to apply much of your own effort. The device will do everything on its own. Also, the rubber attachment can be used to peel off the adhesive tape itself, this significantly speeds up the process.
Chemical liquids as a way to destroy glue residues
Of liquids, gasoline and paint thinners are best suited to erase the effects of gluing the fixing material. The liquid is required to be applied to a napkin, then treat the glue stain. When exposed to chemicals, the glue dissolves, the stain can be removed without problems. However, it is important to remember that this method cannot be used to process such planes that, when exposed to reagents, can be seriously damaged. Another disadvantage is a pungent chemical odor. It will be present in the room for a long time; it is impossible to completely wash it at one time.
Another liquid that can help remove scotch marks is nail polish remover. The condition for its use will be the complete absence of acetone in the composition.
Paraffin-based lighter fluid can also help in removing contaminants, but it works only on certain types of adhesives.
Removing scotch tape with vinegar
Plain vinegar can easily remove double-sided tape. A good result is achieved due to the fact that vinegar, which is an aggressive agent. When applied to the desired area, it softens both the adhesive layer and the base itself. After the vinegar treatment has been carried out, the area should be wiped with a dry cloth to finally remove any residual contaminant. With vinegar, it is good to carry out the removal process from materials such as glass, tiles, metal, plastic, as well as mirrors and ceramics. And the smell from vinegar, despite its harshness, disappears rather quickly, since the vapors of vinegar are a volatile substance.
Removing contamination with a window cleaner
Factory liquids designed for glass cleaning not only effectively fight the remaining dirt, but also remove the specified material itself. The action of such substances is based on the content of the alcohol component and soap.
Removing traces of scotch tape using baking soda
To use baking soda for this purpose, you should, first, make a paste of soda and hot water... The resulting mass is carefully applied to the desired area, after which the traces are easily and quickly removed with a sponge. The final stage of cleaning is rinsing off the cleaning composition with clean water. Baking soda widely used for cleaning materials such as plastics or tiles. It is important not to rub too hard during the baking soda procedure, so that there is no small scratches and other damage.
Ethyl or ammonia
It is recommended to apply ethyl alcohol on a cotton-gauze swab or cotton pad... Then you need to scrub the area until all the dirt has come off. An important condition in this case, timely replacement of dirty tampons with clean ones is necessary, since the speed of the cleaning process depends on this. Ethyl alcohol affects the base of the adhesive tape already at the molecular level, destroying its structure.
In addition to ethyl alcohol, you can also use ammonia... It works in a similar way to ethyl alcohol. The difference is a pungent peculiar smell, which quickly disappears.
According to experts, fresh traces left after removing double-sided tape are easier to remove than old dirt. The more the age of the stain, the more it is absorbed into the underlying material, respectively, the more difficult it will be to remove it without residue. In addition, adhering dust and other small particles significantly complicate the cleaning process and restoration of the original condition of the affected area. For stubborn marks, heating procedures work well if the characteristics of the material to which the tape has been fixed allow it.
We all know the adhesive tape called "scotch", which we use for many purposes in everyday life. Its producers gave it the name "scotch" for a reason. Such a name had a well-known Scotsman in wide circles, and in the last century in America it had a synonym for "stinginess".
This nickname was given to the first samples of the world famous tape from users who had complaints that there was too little glue on the tape. A lot of time has passed since then, and the situation has changed a lot - now we are racking our brains so that there are no traces of adhesive tape on the surfaces, because there is a lot of glue on it.
In practice, however, difficulties in removing the remnants of such a tape arise only for those people who do not have sufficient knowledge and do not have an idea of some of the tricks that would allow, without making any efforts, to remove the adhesive on acrylic bases.
From this we can conclude that for the collection the right remedy Must have general concepts about the surfaces to which the tape was applied.
The abundance of plastic in our homes is off the charts: most of our everyday items are made of this material - children's toys, furniture, frames, etc.
And before removing traces of adhesive tape from plastic, you need to understand how good this material has performance characteristics... It is not difficult to clear it in this case - it is important to understand how aggressive it can tolerate.
Again, you need to take into account the time the tape is on the surface of the plastic, because the longer it stays on it, the more difficult it will be to wipe it off. As improvised means boldly can be used:
- sunflower oil;
- petrol;
- regular eraser;
- with which we dry our hair.
Try to remove the adhesive from the tape with the tools that everyone in the house has. If this does not help, resort to more effective methods... Let's take a closer look at each of the proposed options in practice.
As strange as it may sound, ordinary vegetable oil can help you remove traces of scotch tape. The thing is that it mixes with the texture of the glue and thereby changes its properties.
It is as easy as shelling pears to do this: pour oil directly onto the surface, or soak a cloth in it and apply it to the dirty surface for a couple of hours.
After this time, the glue will lose its qualities, after which it will not be difficult to remove it with an ordinary napkin, and the entire surface will eventually need to be washed with a solution of soap so that there is no fat content left.
There is one caveat: if you do not have the opportunity to thoroughly wash the surface with soap and water after the procedure, it is better not to use this method.
You probably have stationery in your house, and an ordinary school eraser is sure to be lying around somewhere. Using such a banal means, you will not leave a trace of scotch tape even from the most "ancient" times.
The dirt will be removed in the same way as the traces of children's pencils in the album - just brush off the remaining specks in the end. Wipe off the tape according to this principle it is possible from absolutely any surfaces:
- from glass;
- with plastic;
- any children's toys;
- and even electronics.
The disadvantages include only the time it takes to remove these marks, because the surface can be rather big and it will take more than one hour to wipe it off.
Use white spirit, or refined gasoline, which in Everyday life we refuel lighters - such methods will forever be able to from almost any surface made of glass or plastic.
The point is small - just moisten a small cotton swab in such a product and wipe the surface. After the procedure, it will need to be washed thoroughly. warm water with soapy water.
Please note that in an ardent desire to wipe off the marks on the surfaces, you can overdo it and the glue will be removed together in top layer products. In this case, you run the risk of getting white spots and remove the gloss.
To prevent this, try on a barely noticeable area of the affected object. If you need to remove the adhesive from the glass, remember that "flammable" methods will require special care and a lot of air.
It is not so easy to clean up traces that are already old. In plastic surfaces and glass, glue can stick tightly, so professionals recommend cleaning it as soon as possible. It is better to carry out the procedure in one fell swoop than to hold out until the glue and your glass literally turn into a single whole and it will be simply impossible to wipe it off.
Be that as it may, we do not always do everything according to the rules, and it happens that time is wasted, and you want to end up giving the original look to the products. In such situations, a regular hair dryer can come to your rescue.
Of course, he himself will not remove the glue, but thanks to the heat that the hair dryer will radiate to the surface, the structure will become softer and more pliable, after which it can be easily removed using any detergent, which will be at hand.
This method will be simply irreplaceable in cases where you need to remove double-sided tape from the surface. The thing is that, in addition to acrylic, it also contains rubber and other foams - they are difficult to clean.
Pay attention to the surface structure. Keep in mind that not every plastic product will survive such a change temperature regime without losing their aesthetic qualities.
Are there scotch marks on the refrigerator? You won't find a better remedy
In the struggle for a "clean face" of his household appliances we often resort to a lot of options, while omitting the most elementary ones.
Do not hesitate to ask to remove the tape right in the store: it happens that store employees simply miss this moment if they are not reminded. But they should have in stock specialized pencils and liquids, which help one hundred percent to clean the technique of glue.
If you missed this moment, do not despair. In your house there will definitely be tools to help you:
- acetone;
- vinegar or alcohol;
- detergent for windows.
Such substances can be safely used in order to get rid of glue spots on mirrors, glass, ceramics and tiles.
And it’s impossible to argue with that. Using nail polish remover, you will effectively, and, most importantly, quickly remove traces of the tape.
If, in addition to glue, there are pieces of the adhesive tape on the surfaces, then moisten the sponge in the liquid and apply it to the tape for a while - after a few minutes, the procedure is repeated.
The disadvantages include the fact that this method can not always be used.
For example, it is undesirable to wipe tinted glass or metal products with such a liquid.
As it has already become clear, it is quite possible to get rid of the hated traces of adhesive tape with the help of improvised means. To do this, you need a little diligence and free time.
Take your time to draw conclusions - try several options. It’s no one’s fault that you held out until the moment when the glue was strongly eaten. Do your best and you will succeed.
You use scotch tape when transporting furniture - you "fix" the doors of cupboards, cabinets and nightstands with it. This ribbon is very reliable and usually does not fail. But when the furniture has already been transported, it is waiting for you an unpleasant surprise... Suddenly it turns out that it is not at all easy to wipe the sticky miracle from the bedside tables. And even if it succeeds, then you still have to suffer with the remaining sticky spot. So how can you scrub the scotch tape from furniture, so as not to leave any traces? You will find out now.
Regular gasoline for lighters is a great way to get rid of sticky tape:
Just take a piece of cloth and moisten lighter gasoline liberally.
Walk through the "remains" of the tape.
Rinse the cleared area with warm water.
Wipe it dry, that's all.
But we warn you: the stench will still be the same, so the method is effective, but not without flaws.
Very important! Use gasoline very carefully, especially with polished and varnished surfaces... If you keep the "fuel" on them for too long, then it will eat up so much that you cannot remove it later. Well, maybe together with polishing.
White spirit solvent perfectly relieves adhesive tape. The method of removal is the same as with gasoline for lighters.
Eraser
The eraser not only erases various pencil daubs - it also cleans up the places where you had to glue the tape without any problems. Do it in this way:
Take the eraser, until it turns blue, three on the remnants of the sticky miracle.
Then "polish" with a dry cloth, and the business is over.
The method is excellent, but quite long - you just need angelic patience to completely remove the Velcro.
The oil perfectly removes adhesion from polished and painted surfaces:
Dampen a clean cloth with oil.
Rub the sticky spot well.
Do not touch for 20 minutes, so that the sticky spot has enough oil to "nap" and begin to disintegrate.
Rinse off with polish and clean with a spatula.
Wipe with something dry ( paper towel will do), and say the long-awaited goodbye to the sticky miracle.
The disadvantages of this method are the same stench. Plus, if the surface is untreated wood, it is dangerous to rub it with oil on it - oily stains may remain.
You can wash away sticky marks and essential oil, which is sold in any pharmacy. But even after it, the smell remains. True, it is much more pleasant than the aroma of sunflower, which will delight only the fetishists of this plant.
Soda
To remove sticky stains from furniture, regular baking soda is enough:
Prepare baking soda and dilute it in water to form a paste that looks like sour cream.
Apply "sour cream" on a sponge and three on sticky spots with it.
Rinse and dry.
Hairdryer - for furniture plastic
Scotch tape can go into plastic almost forever. The sun's rays are to blame - they literally "crown" the adhesive substance with plastic surfaces, make them a single whole - it becomes almost impossible to wash the stains. But there is salvation and its name is hair dryer. Yes, yes, the one with which you dry your hair after a shower or shower. Just:
Heat the sticky spots with a hairdryer (to soften them, hot air- the very thing).
Then put a tampon dipped in the same vegetable oil... Rub it well over the heated sticky spots.
Remove the oil with soap and that's it.
Important! Furniture plastic does not always cope well with the attack of hot air vapors. If it is not of very high quality, yellow stains that are difficult to remove and even deformations may appear. To hide them, you will again have to glue something on top: film, wallpaper ... well, and in general, why not decor?
Tooth powder - for chipboard furniture
You won't have to mess around with scotch tape stuck to chipboard furniture. Enough regular tooth powder and shaving foam (or any decent dishwashing detergent):
Mix the toothpowder with the foam.
Apply with a sponge to the remaining tape.
Wait (literally a couple of minutes) until the gummy spot begins to liquefy.
Take a damp sponge and carefully remove the liquefied glue without using strong pressure.
Acetone - for upholstered furniture
WITH upholstered furniture The easiest way to remove the sticky substance is with acetone:
Treat the sticky spot with it.
Dampen a cloth with a cleaning solution or regular soapy water.
Wipe off the remains of the tape.
Finally, run with a dry cloth to permanently remove any marks.
Abrasive paste - for glass
If there are traces of sticking on the glass of the sideboard or sideboard, then it will be difficult to do without abrasive pastes. So:
Be sure to wear latex gloves, after all, after all, you have to work with chemical- abrasive paste. It is better that it does not get on the skin.
Take a sponge and put some paste on it.
Thoroughly go over the remaining adhesive tape with a sponge. Attention! Be sure to clean the sponge from time to time (with a regular rinse) from sticky particles and "waste" paste;
At the end, rinse the glass thoroughly and dry it dry.
Important! Abrasives are only safe for glass. They easily damage other surfaces, rough, scratch.
Drill - for double-sided tape
Double-sided tape can be a real headache. It contains rubber and some other foams, thanks to which the double-sided tape sticks literally tightly. But you can still remove the adhesion. To do this, you need to buy a special rubber drill bit. Outwardly, it resembles an ordinary eraser and is designed just for removing particularly sticky substances. The nozzle does not pose a great danger to furniture. And angelic patience, as in the case of a "hand" eraser, is not needed - the drill will deal with sticky spots in no time.
All-in-one anti-label and dishwashing detergent
If you do not want to be fooled, the advice is simple - buy a universal remedy against labels in the store. It will clear the traces of the tape, but the truth will have to fork out.
Here, watch a video about one interesting "wagon":
Well, if you want it to be cheap, but cheerful, just use a regular dishwashing detergent. Do it like this:
Add dish soap to hot water.
Using a cloth or sponge, apply the mixture to the sticky spot.
After a couple of minutes, the glue will liquefy, and you can easily remove it with a regular dry cloth.
But be sure to keep in mind: this method is simple, but far from always effective. As the saying goes: breaking - not building, gluing - not tearing ...
Scotch tape with scotch tape. This is not a joke at all. Just:
Apply a strip of adhesive tape to the remains.
Tear it off abruptly.
If necessary, repeat the procedure a couple of times.
There will be nothing left of the adhesive tape.
Our congratulations! Now you finally know how to get rid of the adhesion. It's time to get a bottle of scotch tape out of the cabinet-bar and drink a couple of sips for defeating his sticky namesake.
