How to descale an electric kettle? How to remove scale in the kettle: ready-made solutions and the correct proportions of folk remedies Means for cleaning the kettle from scale.

Have you ever tested tap water? If not, then one can only assume what is contained in it, except for “ash-two-o”. Some substances are easy to detect even without careful analysis - these are metal salts of magnesium and calcium. The water in which they are contained is called hard water.

Take a look inside your teapot. If you see a persistent grayish coating (scale) - it means that the water in your water supply is hard.

Hardness of water

There are many ways to get rid of hard water. You can use chemicals or filters, but the easiest way is to boil the water. In this case, soluble hydrocarbons will turn into insoluble carbonates and settle in the form of scale on the walls of the dishes.

We note right away that it is impossible to use hard sponges or knives, this can damage the dishes. Knowing that the walls are only chemical compound, try to act on it by chemical means.

You can descale the kettle with the help of inorganic and organic acids. Have you ever extinguished soda with vinegar? Something similar happens with scale when acids are added. First, use vinegar. Moreover, it is in the arsenal of any hostess.

We take vinegar

People got acquainted with vinegar a long time ago, when the first barrel of wine turned sour from an unlucky winemaker. But it is unlikely that people thought that this spoiled wine would be quite a valuable tool in the economy.

Use at least 9% vinegar for cleaning. In one liter of water, 150 g of the substance must be dissolved. It is even better to use a more concentrated solution - vinegar essence. It can be taken one (maximum two) tablespoon. Pour the solution into the kettle (up to half the volume) and boil. You need to boil for at least half an hour.

During the cleaning procedure, there will be a strong smell of vinegar in the kitchen. Therefore, it is advisable to open a window or at least a window, and remove children and asthmatics to another room. After the procedure, the kitchen should be well ventilated.

If the plaque is large, it is not possible to remove it immediately. In this case, the cleaning can be repeated. At the very end, rinse the dishes thoroughly to get rid of the persistent smell of vinegar.

With the help of vinegar, you can also clean the electric kettle from scale. You have to pour it all the way to the top. clean water and dissolve the required amount of the product in it.

The peculiarity of cleaning the electric kettle is that continuous boiling for a certain time is impossible.

Proceed as follows: wait until the kettle turns off automatically, then wait a little and turn it on again. Repeat several times. After the procedure, boil the kettle with the addition of detergents, after which - with clean water.

Lemon cleansing

It is not difficult to clean a kettle from scale with citric acid. You can buy it at the grocery store. The advantage of this tool is the absence of a pungent odor and absolute harmlessness. Despite the fact that it is a weak organic acid, it is able to dissolve hardness salts.

The whole cleaning procedure consists of 6 stages:

Buy 1-2 25g or 20g packs of citric acid.
Pour two thirds into the kettle cold water and pour one sachet of citric acid into it.
Boil water for about 5 minutes.
Check the quality of cleaning. To do this, remove the kettle from the heat and gently stir the water in it. Flakes in the water indicate the effectiveness of the procedure.
After cleaning, drain the dirty solution and rinse the kettle under running water.
Boil the kettle twice with clean water.

If there is not a lot of scale in the kettle, the cleaning procedure can be carried out without boiling. Dissolve citric acid in water, pour into a teapot, wait about 5 hours. Then proceed as in the previous case.

Soda will help

And now we will tell you how to use soda to clean the kettle from scale. First, fill the kettle with clean tap water. Then dissolve the soda - a tablespoon with a slide - and boil.

Wait about 20 minutes, then drain the solution and refill the kettle. Then you need to add one tablespoon of citric acid and boil. Pour out the dirty water and clean the kettle with a soft sponge.

Citric acid can be replaced with vinegar. To clean it, you need to boil water and immediately add 3 tablespoons of soda to it. After half an hour, boil the solution again and pour it out of the kettle. Then fill it up hot water with vinegar essence (2 tablespoons).

Bring the solution to a boil, wait half an hour and pour. As in previous version, clean the remaining loose plaque with a sponge. Such cleaning can be carried out for teapots of any kind.

Baking soda loosens scale, while citric or acetic acid dissolves it. Using baking soda for cleaning is very beneficial because it is cheap, affordable and absolutely harmless.

Coca-Cola against scale

Why Coke? It contains inorganic phosphoric acid, which is added to the drink to improve the taste. And the ortho action phosphoric acid on carbonates similarly to the action of acetic and citric acids.

Of course, the concentration of acid in Coca-Cola is low. Therefore, with a thick layer of scale, it will not help. But it will cope with a small raid. Moreover, it is the most safe way clean the teapot.

Pour the drink into the teapot up to half the volume. Wait for the gas bubbles to come out. After that, boil the water and let it stand for half an hour. Then drain the solution from the kettle and rinse with clean water.

To keep your kettle always in perfect condition, descale it every month. With a small layer of contamination, the cleaning procedure can be carried out without heating. In advanced cases, use industrial scale removers. And do not forget to rinse the dishes well with tap water after any cleaning.

My greetings to all. Every housewife dreams of having a clean kettle that pleases with a pleasant tea party. But scale often accumulates on its walls. Today we will learn how to clean the kettle from scale.

What is scale dangerous and why you need to get rid of it

Scale is dangerous in that when it penetrates our body, it harms it, although we may not notice it right away. Scale in the kettle is salts, harmful impurities and insoluble metals.

If for many years they enter the body, then a person may develop osteochondrosis, gout, kidney stones and other misfortunes. Even if you pass water through a filter, salts still remain. The most best water for boiling - spring or from bottles.

Cleansing Methods

Plaque on the walls of the kettle can be cleaned. Many housewives try to buy the most expensive products in the store, even realizing that they cause great harm to their health. Isn't it better to find ways that at home will make any dishes shine.

Cleaning won't take long. It is enough to clean the dishes once a month so that the plaque recedes for a long time. With very hard water, this will have to be done twice a month. If the layer is small, then the easiest way is cleansing citric acid:

Fill the kettle cold water, for 2/3 of the volume.
Pour 1 tbsp. l. acids per 1 liter.
Boil for 5 minutes.
Wait until cool, then drain the water.
If the plaque has not disappeared, repeat again.

But citric acid is only suitable for electrical products, as well as stainless steel or glass. Enameled and metal products may deteriorate.

For simple and electric kettles stainless steel or glass Lemon cleansing is fine. Lemon can remove plaque of any thickness:

Cut the lemon into small slices, put in a container.
Pour 2/3 of the container with water, put on fire.
After boiling, reduce the fire.
Boil the lemon for 30 minutes, then let cool.
Drain the water, remove the rest of the layering with a soft sponge.

metal teapot you can clean it with vinegar, but it’s better not to touch the electric one:

Pour in the water too.
Pour in vinegar - 0.5 cups per 1 liter of water (essences - 3 tsp per 1 liter of water).
Boil, leave to brew for 1 hour, then drain.
Before boiling water for tea, boil twice and drain to remove the smell of vinegar.

This method will quickly and efficiently remove any layer, but you need to rub it with a sponge, achieving the perfect shine.

From cleaning with vinegar will spread around the room bad smell. Do not forget to open the window or turn on the hood.

A delicious drink will help in the household: Coca-Cola from scale

It's about about the drink Coca-Cola, which contains the acid we need. To clean with Coca-Cola, you need to take enough liquid so that it covers the bottom with a sufficiently large layer. Then boil and leave for 1 hour so that the acid corrodes the sediment. After this procedure, wipe the bottom and walls with a sponge. Sprite and Pepsi will do.

If the kettle has been in a running state for a long time, then you need to do this procedure 2-3 times. This drink cleanses well electrical appliance.

Almighty Soda

Where only soda is not used! It heals and makes pastries more fluffy and tasty. For laundering scale, it is also useful to us. This powder can be used to clean both electric and enameled vessels.

The advantages of cleaning with soda include its cheapness and safety. There are also disadvantages. Baking soda can scratch the surface of the product.

Carrying out the procedure:

Pour water up to half of the container.
Pour 2 tbsp. soda.
Boil for half an hour, let cool.
Wash the inside with a sponge.

Vinegar and soda. With these ingredients, you can bring an enameled and metal teapot to a shine, it is better not to touch the electric one.

First, boil water with soda for 25-30 minutes, 1 tbsp. l. for 1 liter of water.
Pour out the liquid, fill in a new one.
Pour 0.5 cup of vinegar per 1 liter. water, boil again for 30 minutes.
Wipe inside with a sponge to remove loose plaque.

Method for all types of cookware, except for electric ones. Soda, vinegar and citric acid will help get rid of old scale. You will have to boil the dishes three times, first with soda, then with citric acid, then with vinegar. Proportions as above.

Cleanups in action!

Hard salts will help remove apple or potato peels. It turns out that they also have acids that can cope with plaque. You can put potato, apple and pear peels together.

If you notice salt deposits inside the new dishes, then put cleanings in it, fill it with water, put it on fire for half an hour. But this remedy will not help with thick scale.

For all types of tea utensils, you can use pickle from cucumbers, where there is vinegar or citric acid. Just fill the container with brine, hold on fire for 30 minutes. Here is a simple way used by our grandmothers.

A glass teapot will clean lemon juice and soda well. Pour in water, pour in 2 tbsp. lemon juice and 2 tbsp. l. soda, boil for 15 minutes. Pour out the water, wipe the inside with a soft sponge. Instead of juice, citric acid is suitable.

The best products for cleaning a thermos-kettle

Thermos kettle will take more electricity if it is not periodically descaled. In addition, you will feel a salty taste of water, the device will make a lot of noise during operation. If you neglect cleaning, the device may simply burn out.

Soda and citric acid will help best.

First, pour 1 tbsp. soda, boil, wait for the liquid to cool.
Drain the solution new water.
Put 1 sachet of citric acid, boil again, leave to cool, then drain the solution.
Pour clean water, bring to a boil, then pour. The device is now ready for use.

Can be cleaned with vinegar essence. Take 1 liter. water 50 ml essence, bring to a boil, leave to cool. good method- cleansing with a colorless Sprite, as described above.

ceramic appliance can also be cleaned by the means described above.

Simple ascorbic acid It will also help to achieve shine inside the dishes. 1 tbsp is enough for 1 liter of water. l. ascorbic. It's safe, but effective method especially if the inside is heavily soiled.

With a little pollution, you can simply pour soda into the water and hold for several hours. After each purification, the first boiled water must be poured out to remove the remaining lime. This applies to all types of tea utensils.

plastic teapot it is best to clean with ascorbic acid and soda. The technique is described above.
Use citric acid to shine an aluminum appliance. Pour water, pour 1 tbsp. citric acid, bring to a boil, let cool.

Cleaning the outer surface

Stainless steel dishes are easy to bring to a shine on the outside if you use folk remedies.

The easiest remedy is toothpaste.

Take an old toothbrush that has lost its hardness.
Squeeze on her toothpaste.
Wipe the entire surface of the instrument.
Rinse first with warm, then cold water.
Pat dry with a towel.
Pour water into the kettle, warm it up a little, polish the warm appliance with a soft towel.

If the contamination is large, then squeeze the toothpaste onto the hard side of the sponge and gently rub the surface. Don't press too hard to avoid scratches. Scratched dishes will become more dirty and harder to clean. If the kettle is burned on the stove, then most likely it will have to be thrown away.

Another way to achieve shine is to boil for 30 minutes in water, where to add salt and soda - 1 tbsp per liter. spoon. It is important that the kettle is completely submerged in water. Then wipe it off with a soft sponge.

Another way:

In heated water, pour 3 tbsp. spoons baking soda And ;
Dip the dishes in the solution;
Boil for 5 minutes, leave to cool;
Rinse with water, polish with a towel.

It is better not to bring the stainless steel device to contamination. After each boiling of water, polish it. If there is no time for cleaning procedures, it is better not to buy such dishes.

Enamel teapot can be cleaned with ordinary soda, but do not rub hard so that there are no scratches. Plain soap - the best remedy. Lather the sponge with soap and thoroughly walk over the surface, then rinse with warm water. If you do not run the dishes, then this method will prevent your dishes from getting very dirty.

An aluminum kettle can be cleaned with. Pound 15 tablets of coal into powder, moisten the walls of the container, apply the powder, hold for 1 hour, then rinse with water, dry with a towel.

Descaling detergents

In stores, you can find enough detergents to help clean the outside of any kettle. The main thing is that they do not get inside the dishes.

When working with detergents It is better to wear gloves, do not touch your eyes.

Dear friends, you have learned many ways to clean dishes, use them and drink pure delicious tea!

Scale (salt sediment) disrupts the operation of the appliance, and white and red flakes fall into the cup along with boiled water. At first this layer is just white coating, then it turns into a stone that is difficult to remove. I will describe effective ways how to clean the kettle from scale at home.

Warn households that it is impossible to use the device temporarily.
Pour water up to the middle of the container.
Add active ingredient.
Turn on the device.
Wait at least half an hour.
Wash the interior thoroughly.

To remove old petrified plaque, use several methods at once or try again.

Traditional effective methods

Cleaning an electrical appliance at home is easiest with the help of improvised means:

Soda - softens salt deposits.
Acids - dissolve even hardened scale.
Brush and sponge- will not damage the surface of the kettle walls, like their metal counterparts.

So, the main sediment fighters are soda and citric acid.

Method 1: Baking Soda

Baking soda or soda ash will help restore cleanliness to any electrical appliances (plastic, metal, ceramic). There are 3 ways to descale the kettle with soda:

Image	Description
	Method 1 - with soda ash Recipe for multilayer scale: Fill the bowl with water. Pour the powder at the rate of 1 tablespoon per 1 liter. Boil and leave to cool. Rinse the kettle, removing any remaining sediment.
	Method 2 - with baking soda and vinegar Recipe from a small layer of salts: Empty the kettle from the water. Prepare containers for vinegar and soda. Here, soda from scale in the kettle works in combination with vinegar. Put on rubber gloves. Soak a sponge in vinegar and then dip in the powder. With your hands, rub into the inner surface of the device. Rinse the appliance. Vinegar and soda, when combined, give a reaction that destroys salt deposits.
	Method 3 - a powerful complex from soda ash and citric acid Dissolve in a liter of water 1 tbsp. a spoonful of soda and 1 teaspoon of citric acid. Pour the resulting solution into the device. Next - boil and leave to cool. Remove loose residues with a brush. Wash the device thoroughly. This method is not for plastic. Long-term contact with acid and alkali will destroy it. An aluminum kettle can also suffer.

Method 2: Applying Acids

Any old deposits will easily remove acids:

Acid	Application
	Vinegar For cleaning metal, ceramic and glass kettles: Prepare a solution: ½ cup of vinegar to 1 liter of water. Bring the solution to a boil. Leave for an hour to loosen the sediment. Wipe the appliance with a sponge removing the remaining salt layer. Wash thoroughly. The disadvantage of this method is the unpleasant smell in the kitchen from vinegar. Ventilate.
	2 types of citric acid are used: powder and lemon. Cleaning instruction: Dissolve a teaspoon of powder in 500 ml of water or cut sour fruit into 4 parts. Turn on the electric kettle. The next half hour is the time for cooling and softening the plaque. Clean up leftovers sponge. Rinse. The bonus of the method is the refreshing lemon scent.
	Cleaning the kettle from scale with oxalic acid: Pour the powder into the device, about half a cup. After 10 minutes, fill it with water. Boil. Wash thoroughly plenty of water. With a slight coating, you can use fresh sorrel: boil a few leaves.
	Lemonade contains phosphoric and citric acids, liquidating sediment: Shake it up carbonated drink. Pour into the teapot. Turn on device. Leave to cool.
	Organic peel acids get rid of the apple Electric kettle from scale: Peel an apple from the peel. Fold up cleaning into the device. Pour in the water and boil. Leave for the night. Use this safe natural remedy once a week for prevention.

Method 3: combined (for a thick layer of scale)

After such a powerful attack, all scale will come off. This is a two-step cleanse:

Step 1: remove with soda and acid. Pour a little soda in a saucer, add any acid from the table. Treat the entire surface with a touch of the resulting slurry. Rinse after 10 minutes.

Step 2: Remove scale and odors. Cut the lemon into slices and place in the electric kettle. Boil water with lemon and leave for half an hour. Wash the device from loose residues.

A variety of household chemicals from scale

Except folk methods, you can clean the electric kettle using chemicals specially designed for this purpose.

Their main components:

Organic and mineral acids(citric, sulfamic, adipic).
Sodium tripolyphosphate- the main product from the processing of phosphoric acid in expensive products.
Soda.

These tools also solve the problem of how to descale an enamel kettle. Available in liquid, powder or tablet form. Use strictly according to the instructions so as not to damage the equipment.

The general scheme of how to get rid of scale special cleaners:

Prepare a solution.
Boil in a kettle.
Then pour.
Remove scale. Softened, it can be easily removed.
Boil clean water 2-3 times to flush out any remaining chemicals.

Conclusion

We found out that the choice of ways to remove scale in an electric kettle is quite large. Home remedies are not inferior in efficiency to industrial ones, verified! Check out the video in this article, and you can ask questions in the comments.

Even if you use filtered or bottled water, pouring it into a kettle with a cleaning system, sooner or later you will have to face such a problem as scale in the kettle. In this article, we have collected the most effective ways to deal with it, as fast and harmless to technology as possible.

What is scale and why it must be removed

Sometimes on the Internet you can find the opinion that it is not necessary to remove scale - it carries a purely visual defect, which plays a role only in glass teapots. Such a statement is fundamentally wrong.

First of all, you need to figure out how scale appears. Most often, for boiling, ordinary running water which contains quite a lot of impurities. However, they are in both bottled and filtered water - though in smaller quantities.

Most of them are various salts, which, when heated, are separated into carbon dioxide and a solid sodium precipitate that remains on the walls of the dishes. It doesn't wash off though. plain water and has the ability to accumulate.

The problem of scale is not only in unaesthetic appearance

Such a coating harms your kettle: it worsens the thermal conductivity, which means that it will take more time to heat up. Because of this, in ordinary teapots, the layer gradually becomes thinner. ceramic coating, if it is, and in electric heating elements fail faster.

However, this factor can be considered rather secondary. The main reason why you should deal with scale is potential harm for good health. Since plaque consists of salt deposits, insoluble metals and a variety of harmful impurities, including chlorine, the sediment that enters the body can contribute to the development of various diseases. The mixture can provoke arthritis, gout, osteochondrosis, kidney stones or toxicological poisoning.

That is why you need to clean the kettle from plaque regularly. In the following sections, we'll show you how to do it right.

How often should the kettle be descaled?

The answer to this question depends on two factors: heater and the quality of the water you use.

Glass teapots need to be cleaned almost every week: any coating, even the thinnest, is noticeable on a transparent surface. But metal or ceramic can be cleaned of plaque about once a month - as it gets dirty.

In addition, kettles with an open heating coil need to be cleaned more than those with a heating element closed. Otherwise, the device will fail faster.

As for the quality of water, then see for yourself. Bottled or well-filtered water pollutes the kettle less, but it is not a panacea - only distilled water absolutely does not precipitate, but we do not recommend anyone to drink it - it is too unhealthy.

Quality tap water depends on the water service, its source, and even the condition of the pipes in your home. Sometimes it is enough to clean the kettle every couple of months, and sometimes after a week a thick layer of scale forms in the tank.

Therefore, it is up to you to decide on the frequency of cleaning your kettle - it is impossible to give an exact answer remotely.

How to prevent scale formation

You will hardly be able to completely avoid the appearance of precipitation - unless you really use crystal clear water, with a minimum of heavy impurities. However, reducing the amount of scale is quite realistic.

First of all, if the water quality in your home leaves much to be desired, get a good water filter. What it will be, cassette or streaming, you decide. Personally, we recommend the faucet attachment, which is by far the most efficient and cost-effective option.
Do not leave water in the kettle. After drinking tea, part of the water is not used? Pour it out. This will greatly facilitate the care of the kettle in the future.
Try to clean the kettle regularly with a soft sponge dipped in soapy water. If there is no old plaque on the surface, you will be able to remove particles that have not yet adhered, which will eventually turn into a persistent sediment.

Advice: Even if you do not have the opportunity to purchase a filter, try to defend the water before boiling. A day will be enough.

If it was not possible to completely avoid the appearance of scale or you need to clean the old kettle, we recommend using our recommendations.

Method 1: Clean the kettle with citric acid

Banal food remedy worth a couple of rubles, which can be found in any kitchen, easily copes with scale of mild and moderate severity. The procedure is not particularly complicated: fill the kettle two-thirds with water and add citric acid. The powder should be poured at the rate of one tablespoon for every liter of water.

Citric acid is one of the most available ways clean the kettle

Then turn on the kettle and wait for the water to cool. Drain the water when it has cooled to room temperature. Then wipe the teapot with a soft sponge. If necessary, the procedure can be repeated two or three times in a row until the scale is completely gone. After that, boil the kettle again with clean water and wash it thoroughly.

The method is effective, but it will not cope with the old scale that has eaten into the surface. In addition, it is not suitable for enameled teapots - the surface of the latter may tarnish from the aggressive effects of citric acid. But it can be used for both conventional and electric kettles.

conclusions: Effective, budget and very simple method.

Method 2: Clean the kettle with lemon

For those who prefer to use the most natural products in the kitchen, citric acid can be replaced with lemon. As with the previous method, don't experiment with enameled teapots unless you want the enamel to discolor or crack.

Cut the lemon into thin slices and place in a teapot filled with cold water two-thirds full. Then boil it. Further, the procedure is different for conventional and electric kettles.

The most environmentally friendly way to clean your kettle

In the first case, you must wait until the water boils, and then keep the kettle on low heat for 20-30 minutes.

For an electric kettle, you need to boil it several times, after the water has cooled down a bit - on average, reviews recommend three boils with an interval of 10 minutes.

After the water has completely cooled, drain it, and wipe the kettle with a soft sponge to remove any remaining plaque. Most often, a second procedure is not required, but if necessary, you can boil the lemon again. The bonus is a pleasant aroma that will spread throughout your kitchen.

Method 3: Clean the kettle with vinegar

First of all, it should be noted that this technique is not suitable for electric kettles: vinegar can only be used for ordinary metal ones. However, for them, this method is very effective and convenient.

As in previous cases, you need to fill the kettle by two thirds. Add vinegar, about half a cup per liter. If you are using a concentrated essence, you will need one and a half tablespoons for the same amount of liquid.

Measure the amount of vinegar carefully

Boil water and leave to cool for one hour. Then just drain. Wipe stubborn stains with a soft sponge - they will go away. After cleaning, it is necessary to boil the kettle with plain water two or three times.

Important: Please note that when heated, vinegar emits a very pungent aroma, so the procedure should be carried out only with open windows or a powerful hood turned on.

Method 4: Clean the kettle with baking soda

An inexpensive and safe way to get rid of even the oldest and toughest scale is to use baking soda. It is suitable for all types of teapots, including enamel ones.

It is important not to overexpose the soda in the kettle

However, baking soda should be used with care - it can scratch the surface, so do not try to just wipe off the plaque with it. In addition, in order to get rid of the old layer of scale, you will have to repeat the procedure at least three times.

In half a kettle of water, add one tablespoon of baking soda (no more!). For ordinary teapot Boil water for half an hour. For electric, it is necessary to turn on the boiling mode several times. Forum users claim that three or four times is enough.

Method 5: A mixture of vinegar and baking soda for cleaning kettles

As everyone knows, when soda is added to vinegar, a chemical reaction occurs. You can use it to clean the scale from the kettle, but you should be careful - you can’t just fill the kettle with vinegar and pour soda. Such an aggressive impact will damage the container.

Soda and vinegar, when mixed, give an active chemical reaction.

You need to fill the kettle two thirds and add one tablespoon of baking soda to a liter of water. Then pour half a glass of vinegar into the tank or add three tablespoons of vinegar essence.

Bring the water to a boil and keep the kettle on low heat for half an hour. Then wipe off any dirt with a soft cloth. This method is not suitable for electric kettles, but it perfectly cleans old scale from ordinary ones.

Method 6: Remove old scale with soda, vinegar and citric acid

This method cannot be called gentle: it acts very aggressively on the surface, so it is permissible to use it only if the kettle has not been cleaned for several months and a thick layer of scale has formed inside.

This method is only suitable for the oldest scale

In order to clean the kettle, you will need to boil water in it three times for 30 minutes. The first time - with a tablespoon of soda, the second time - with a tablespoon of citric acid, the third time - with a half glass of vinegar. For each case, water should fill the dishes by two-thirds.

After the last boil, carefully wipe the kettle with a sponge, and then boil it several times with clean water. It is very important to ventilate the room well during the cleaning process, as vinegar emits an extremely unpleasant odor when heated.

Method 7: How to clean the kettle with Cola, Sprite or Fanta?

Oddly enough, however, this method has a right to exist.

First of all, a few rules:

Don't use this method on electric kettles with an open heating coil - the sugar in drinks will do more damage to the coil than scale.
For enameled surfaces, choose drinks without dyes, otherwise the shade of the container may change in a completely unpredictable direction.
If there are scratches inside the kettle, the method should also be abandoned - dyes can eat into the damaged surface.

The cleaning process itself is quite simple. Fill the kettle half way with drink and turn it on. Leave it for 20 minutes after the liquid boils. Drain it and rinse it with clean water.

Cola is not only a drink, but also an excellent cleaning agent.

It sounds incredible, but even old scale can be cleaned in this way. However, another question arises here - how safe is it to drink such drinks if they remove something that aggressive detergents do not always cope with.

Method 8: How to clean the kettle with apple peels.

Another method from the category of "Unbelievable, but true." It does not always work: if the scale is old, it will not work in this way to get rid of it. But with a newly appeared plaque, the method works perfectly. In addition, it is considered one of the most gentle. It can be used for glass teapots - it's both eco-friendly and will help give them a shine.

The method is suitable for fans of savings: no waste!

Simply boil two handfuls of apple peel in half a kettle of water for 20 minutes. For electric kettles, you can turn on the boil mode 2-3 times. Then leave the device for two hours. After that, you can drain the liquid and wipe the kettle from the inside with a soft cloth. Rinse it well - a clean kettle is ready to use!

Method 9: Use brine to clean kettles

Frankly, this method is not for everybody. It is difficult to imagine a person who likes the smell of boiling brine. However, if you are not sensitive to aromas and the naturalness of the product is important to you, you can experiment.

It is necessary to pour the brine into the kettle, boil and leave for half an hour. Then drain the brine and rinse the kettle with clean water.

Boiling brine will not appeal to everyone.

True, not every brine is suitable - only one that contains vinegar or citric acid. It is through their action that the effect is achieved. But here the question arises: why boil the brine, if you can just use acid or vinegar?

Method 10: Chemical Descalers

If a quick result is important to you and you don't want to experiment with your own kettle, you can just go to the hardware store and get a descaling agent.

Antinakipin, Cinderella, Glitter ... There are many options, for every taste and budget. We recommend that you carefully study the composition: some drugs should not be used, as they can have an aggressive effect on the coating of the kettle or harm your health.

If you do not want to experiment on the teapot.

On the other hand, most safe means contain as an active ingredient all the same citric acid or soda. So is it worth paying more?

In any case, you can use any of the methods we have given - depending on the type of kettle you have, of course.

The water in the taps leaves much to be desired, therefore, on the walls of all devices in contact with it, remain lime deposits.

Even expensive water filters will not be able to prevent plaque. Sooner or later, it will appear on the surfaces of the appliance and the question will arise how to clean the kettle from scale.

Folk methods

Limescale can be removed quickly using special chemicals. But since they are not safe for health, many prefer folk methods that have been tested by time.

Vinegar

Vinegar is not suitable for removing lime deposits in an electric kettle. This tool is too aggressive and manufacturers do not recommend using it for such equipment.

You can clean the electric kettle with vinegar only as a last resort, when a large layer of deposits has accumulated.

During the procedure in the kitchen will be felt. Therefore, manipulation should be carried out in a room with good ventilation. Open all windows and vents.

When working with vinegar, wear a protective mask so as not to breathe in harmful fumes.

How to clean the kettle from scale:

For metal devices prepare such a solution: 150 ml of 9% table acid is mixed with 1 tbsp. l. essences. ⅔ of water from the total volume is poured into the container, then the prepared composition is added. The mixture is heated and boiled for half an hour. After turning off the stove, leave the kettle for 5 minutes so that the water cools down a bit and repeat the procedure again. This must be done up to 3 times. With a strong limescale, the solution is left overnight. After that, you need to be good.
How to descale an electric kettle: Plastic-cased devices can be damaged if pure acid is used, so preparing the solution is a little different. Water is poured into the device to be cleaned with 5 tbsp. l. citric acid and acetic acid. The device is turned on, left to boil, then turned off. After 15 minutes, the process can be repeated. The process is repeated 3-4 times until the entire plaque is removed. Then washed with detergent.

Descaling the kettle with vinegar is quick and easy. Only such a product leaves behind an unpleasant odor, even after using a detergent.

Boiling clean water, which is carried out at least 3 times, will save you from the stench.

Lemon acid

Cleaning the kettle from scale is gentle for him and safe for humans. Citric acid is an excellent remedy for getting rid of plaque from any thermal elements.

The advantage of this product is the absence of an unpleasant odor, which is good if there are small children in the house.

How to clean the kettle with citric acid from scale:

For conventional appliances: take 2 packs of product, fill the appliance with water, but not completely. Add citric acid to the liquid and boil. The solution should cool down, leave it for 10 minutes. Then cleanse and remove plaque. The procedure can be repeated if the plaque has lagged behind the walls unevenly.
How to clean the kettle from scale with citric acid, if it is electric: a solution of 1–2 tsp is poured into the bowl. funds and 1 liter of water. After the liquid boils, it is drained and another one is collected. It is necessary to boil clean water several times.
If the deposits are small, you can clean the kettle from scale with citric acid even easier. It is dissolved in warm water, pour into the device and leave for 6 hours. After that, you need to wipe off the plaque with a sponge.

Descaling the kettle at home is easy and cheap. You can buy the product at any grocery store.

Sodium bicarbonate

Not only Coca-Cola is suitable, but also Fanta, Sprite, Lemonade, Schweppes.

How to remove scale in an electric kettle:

First you need to release the gas from the drink.
Pour 500 ml of Sprite into a container, close and let it boil.
After boiling, the device is turned off and the liquid is allowed to cool.
Wash off the remaining plaque with a soft sponge, rinse the kitchen appliance several times with clean water.

Coca-Cola and other carbonated drinks contain orthophosphoric acid. Thanks to her, it turns out to remove lime deposits.

This method is ancient - it was successfully used by our great-grandmothers. The method is suitable for all types of devices and is available to everyone.

The only drawback is that it will not cope with chronic growths.

How to descale an enamel kettle:

Water is poured into the device and washed apple or potato peels are placed.
The liquid is brought to a boil and left for 1.5 hours.
Then they walk along the walls with a sponge.

You can clean the electric kettle from scale using this method if you carry out the procedure several times a week.

If the appliance has not been washed for a long time, do not waste your time. Apple peel and potato peels will not help in this case.

Brine

Plaque removal is possible with cucumber or tomato brine. This is an effective folk way.

How to remove scale in an electric kettle:

Pour the brine into the appliance.
Bring to a boil.
Cool, pour out the brine and wash thoroughly from plaque.

This tool is not standalone. Thanks to the vinegar and salt in its composition, the purification process takes place.

Oxalic acid

Of all cleansers folk remedies oxalic acid is considered the most aggressive. It removes heavy limescale deposits.

How to remove scale from the kettle?

Advice of hostesses - algorithm of actions:

I pour a small amount of the product into the device and fill it with water.
The solution must be boiled and left for 5 minutes.
I remove the remains of the product and clean it with a soft sponge.

Oxalic acid good remedy and many housewives recommend using it. Fresh sorrel can also be used to descale, only it contains a little acid, several manipulations may be required.

Household chemicals

The range of household chemicals is great. Products on the shelves of stores effectively remove scale in the kettle.

Before using any products, wear gloves and a protective mask.

Antinakipin and Major Domus can be used as cleaning agents. Such limescale removers chemical products effective on all types of pollution.

How to wash limescale:

Antinakipin. First, water is poured into the dishes to be processed, then the contents of the bag are poured at the rate of 100 g per 2–2.5 liters of water. The solution is brought to a boil and boiled for 20 minutes. After turning off, the liquid is left for 2-3 hours so that Antinakipin works better. To clean the kettle, take a sponge and remove the remnants of plaque.
Major Domus. The product is poured into a container, left for 20 minutes. You don't need to boil. After that, the device is washed with plenty of water. If necessary, the procedure can be repeated.
Cillit another good one industrial tool, capable of quickly removing plaque from the surfaces of the inner walls of coffee makers, kettles. It is necessary to fill the container with clean water, dissolve Cillit in water in a ratio of 100 ml for every 500 ml of water. The agent is left for half an hour. After that, the container must be rinsed. Cillit should be used no more than once a month.

Household chemicals can cause serious irritation of the mucous membranes. When using such tools, you must wear glasses, or do not touch your eyes with your hands during manipulation.

Removal limescale must be carried out in a timely manner so as not to resort to the use of household chemicals.

Because of a large number The accumulated plaque electrical appliance is not only a source of some diseases, because of it the functionality of the device suffers. Before changing the device to a new device, it is worth trying one of the popular cleaning methods.