I can't set up internet on android. Setup steps

It is hardly possible to imagine modern man who does not use the Internet in Everyday life: It's not just about receiving email, searching for information, and viewing media files. Often the Internet is associated with work and study, but also going to shopping center often impossible without the use of the World Wide Web, no matter how strange it sounds. Everyone needs the Internet - from businessmen to old women and schoolchildren. Therefore, the question arises, how to connect the Internet on an Android phone.

How to connect Wi-Fi on your phone

The easiest way to connect to the Internet is through traditional Wi-Fi. There are access points everywhere, at home, too, many people use Wi-Fi connection, because it is fast, convenient and affordable.

How to Connect Wi-Fi on Android

• Go to " WiFi networks»
• Choose the right network
• Connect if the network is not password protected (no padlock symbol next to network signal strength). When using, do not forget that it is better not to pay for purchases through such networks and not to log into personal accounts, as traffic can be intercepted.
• To connect to a secure network, you need to know the password and enter it when connecting.

After connecting, you can use the network, but it is advisable to check whether this network distributes the Internet (for example, go to the browser and try to load some page or using the Speedtest program).

How to connect 3G on Android

• Go to " Settings»
• In the "Wireless networks" section, access to 3G can be found in the item " More" or " Additionally»
• Turn on 3G
• A list of available 3G networks will appear

How to set up internet on android phone

The times of Internet clubs have sunk into oblivion, and all thanks to new technologies. Today, the World Wide Web is available to everyone. You will not surprise anyone with mobile Internet, mobile operators offer a variety of tariff plans through network modes such as EDGE, 3G or 4G. The user only has to choose the best offer for himself. Operators usually send automatic settings after installing the SIM card in the phone. If this does not happen, call the support center and, using the tips of the informant, order the settings, or use the official website of the mobile operator.

How to set up APN. Parameters for connecting the Internet operators of Russia

If you are not connected to the Internet, you need to make settings manually. To do this, you need to know which telecom operator provides you with services (MTS, Beeline, Life ...), what type of 3G network is available to you (you can find out on the website or by calling technical support) and connection parameters, including the so-called APN ( Access Point Name) is the name of the access point.

• Go to " Settings»
• Find the line " SIM cards and networks»
• Select " Access Points (APN)»

• Select internet access point (or APN)
• Click " Add APN»
• Enter the parameters for accessing the Internet, which should be obtained from your operator. A password, login, network name and APN are required.

After the performed operations, you should check if the " Data transfer". Now select your preferred " Network mode» (2G, 3G or 4G) depending on the services provided by the telecom operator.

The page below shows the parameters for connecting popular Russian operators so that you understand how to set up the Internet on an Android phone:

Internet settings MTS

• APN hotspot - internet.mts.ru
• Username - mts
• Password - mts

For devices such as Huawei, Fly, Lenovo, in the field " Authentication Type» is set by default to « Not set". For proper functioning mobile internet We recommend using the " Not».

Internet setup Beeline

• Name - Beeline Internet
• APN- internet.beeline.ru
• Username - beeline
• Password - beeline

Internet setup Megafon

• Name - Megaphone
• APN- internet
• Username - gdata
• Password - gdata

Internet setup Yota

• APN hotspot - internet.yota
• Username - yota
• Password - not entered

Internet setup Tele2

• APN hotspot - internet.tele2.ru
• Username - Tele2 Internet
• Password - not entered

Parameters for connecting the Internet operators of Ukraine:

Internet setup MTS Ukraine

• Name - MTS Internet
• APN hotspot - internet
• Username - any
• Password - not entered

Setting up lifecell internet on Android (setting up lifecell internet on Android)

• APN hotspot - internet
• Password - not entered

Setting up 3G Kyivstar on Android

• APN hotspot - www.ab.kyivstar.net(for contract subscribers: www.kyivstar.net)
• Username - not entered
• Password - not entered

TriMob internet setup

• APN hotspot - 3g.utel.ua
• Username - Trimob
• Password - not entered

How to set up Internet Phoenix on an Android phone

• APN hotspot - internet
• Username - not entered
• Password - not entered

If you are roaming and want to know how to set up the Internet on your Android phone, you need to enable the appropriate settings. Keep in mind that roaming charges are quite high.

How to delete internet settings on Android

Sometimes there is no need to use a particular access point (APN) and the question arises of how to delete Internet settings on Android. We proceed as follows:

• We find " Settings", then " More»
• Go to " Mobile networks»
• Choose " Access Points (APN)»
• Click on the three dots in the upper right corner
• Reset settings

The site recently published an article about Android network settings. We advise you to read it if you have problems with the network.

If I connected my smartphone to the Internet, can I use this connection on my tablet at the same time?

Yes, it is possible using a smartphone as a modem or hotspot. To do this, go to Settings” and select the connection method for the hotspot (Wi-Fi, Bluetooth).

A modern smartphone can theoretically be used without an internet connection. But in this case, in terms of its functionality, it will not be far from the simplest push-button mobile phone. Therefore, we recommend that you connect the Internet using our guide. And you do not have to put money into the account - in the article you will find instructions on connecting to public Wi-Fi networks.

If you are just going to buy a smartphone, then be sure to pay attention to its characteristics. The fact is that different models have different data rates. It is rarely written in numbers - instead, the supported communication standards are indicated in the characteristics. Here is a list in ascending order of speed:

• GPRS;
• EDGE;
• 3G;
• 4G (LTE);
• LTE Advanced.

Focus on this item in the specifications if Internet access is very important to you. Also remember that not all operators have 4G equipment in absolutely every major city our country. And there is nothing to say about towns and villages at all - a 3G smartphone will fit perfectly in them.

You can also pay attention to the supported Wi-Fi standard. In the vast majority of cases, we transmit data via WiFi 802.11n. But in Lately routers supporting the standard are becoming more and more popular 802.11ac, providing a very high speed of receiving and transmitting information. If you plan to install such a router in the near future, then it is advisable to purchase a device that is capable of working with the above Wi-Fi standard. However, this is absolutely not necessary.

Setting up a Wi-Fi network

But enough talk about theory. It's time to talk about how to set up the Internet on Android. And you should start with wifi settings. This is usually what novice users have problems with, since this process hardly automated. Note that it is easiest to connect to your own router. It is a little more difficult to do this with friends, at work, and somewhere else. So, you should do the following:

Step 1. Go to " Settings". If the corresponding icon is not in the notification panel, then find it in the menu.

Step 2 Go to the section " WiFi". On some devices, there is a switch next to it. It must be switched to the on position.

Step 3 If there is a checkbox in this section, then activate it.

Step 4 Now click on the name of the Wi-Fi network with which you want to turn on the Internet on Android.

Step 5 If the network is secure, then enter the password for it. For your convenience, you can check the box next to " Show password". When you're done entering your password, click on the " To plug».

That's all. Now your smartphone has memorized this network and will connect to it automatically. With public networks, the same thing - if you have already connected to one once, then in the future, in this place, your device will connect to it on its own. Although there are exceptions.

Using WPS

Friends can connect to Wi-Fi using another method. It consists in pressing the WPS button on the router. This allows you not to drive in the password and network name. But first, on a smartphone or tablet, you also need to press the WPS button - in this case, not physical, but virtual. This is done as follows:

Step 1. Go to " Settings».

Step 2 Go to the section already mentioned by us " WiFi».

Step 3 Activate the switch if necessary. Then click on the button " Options". On many devices, it is made in the form of a vertical ellipsis and is located in the upper right corner.

Step 4 Click on " Additional functions". On some gadgets, this step is skipped, since the item " WPS” is located directly in the context menu.

Step 5 Click on " WPS button».

After that, the smartphone will connect to the network distributed by the router, as a result of which you will be able to access the Internet.

Setting up GPRS, EDGE, 3G and 4G

With setting up mobile Internet, everything is both easier and more difficult. Usually, the user does not need to delve into the settings at all - telecom operators send a special file that automatically prescribes all the parameters. This does not happen only in the most extreme cases - when your smartphone or tablet model is not in the operator's database. But believe me, these databases are so extensive that you can not find there only all sorts of Chinese non-names. If you are unlucky, you will have to configure Internet access manually. This is done on Android as follows:

Step 1. Go to " Settings' as you did before.

Step 2 Go to the section " Other networks". On some smartphones and tablets, it may be called " Other networks" or " More» - it all depends on the translation.

Step 3 Here you need to click on the item " Mobile networks».

Step 4 What happens next depends on the specific implementation. software. In some devices, you will be taken to a menu, which is shown in the screenshot below. In this case, you need to open the item " Access Points (APN)". In other models, the corresponding settings may immediately open.

Step 5 Be that as it may, you need to add your carrier's access point if these parameters did not arrive after you inserted the SIM card. In our case, this is done by pressing a button with a plus sign.

Step 6 After clicking the appropriate button, you will see a lot of fields. First of all, pay attention to the points " Authentication Type' (may also be referred to as ' authentication type") And " APN type" (on older devices it has the name " Access point type»).

Step 7 In the first paragraph, you must select "PAP". It is this type of authentication that is used by the vast majority of cellular operators around the world.

Step 8 In the second field, manually enter " default,supl" - without quotes and space, as in the next screenshot. Click the button OK».

Step 10 Finally, click on " APN" or " Access point". Enter your operator's special internet address here:

• MTS - internet.mts.ru
• MegaFon - internet
• Beeline - internet.beeline.ru
• TELE2 - internet.tele2.ru

• MTS - mts and mts
• MegaFon - gdata and gdata
• Beeline - beeline and beeline
• TELE2 - both fields are empty

If you use the services of some smaller telecom operator, then you can find out its settings by visiting the official website. You can also call the call center - you will be prompted for APN, username, and password.

Summarizing

As you understand, you can set up mobile Internet without any difficulty. This is done almost easier than on old push-button phones. Fortunately, with current technology, you need to bother with this in very rare cases.

Nowadays, a person, for obvious reasons, cannot do without the Internet on his smartphone. After all, it is the presence of a connection to the World Wide Web that turns the phone from an ordinary “dialer” into the most functional device. Download the application, send a message in the messenger, scroll through the feed on the social network, check the mail and even buy a movie ticket or book a table in a restaurant - the mobile Internet will allow you to perform any such task wherever you are.

But, as practice shows, not always when installing a SIM card in a new device, the Internet is configured automatically. Therefore, in today's article, we will consider how to connect the Internet manually on a smartphone (or tablet) under Android control, iOS and Windows Phone/Mobile. In addition, we will provide all the necessary data to fill in all the key operators in Russia, Ukraine, Belarus and Kazakhstan.

How to connect to the Internet on a smartphone or tablet

• Android
  1. Enter the "Settings" menu.
  2. Select "More".
  3. Then select "Access Points (APN)".
  4. Press the "+" button to add a new access point.
  5. Enter the data required for your carrier.

  Operator settings

  Russia

  • beeline
    1. APN: internet.beeline.ru
    2. Username: beeline
    3. Password: beeline
  • MTS Russia
    1. APN: internet.mts.ru
    2. Username: mts
    3. Password: mts
  • Tele2 Russia
    1. APN: internet.tele2.ru
    2. Password: leave blank
  • Yota
    1. APN: internet.yota.ru
    2. Username: leave blank
    3. Password: leave blank

  Ukraine

  • Kyivstar
    1. Username: leave blank
    2. Password: leave blank
    or
    1. API: internet
    2. Username: leave blank
    3. Password: leave blank
    or (for contract subscribers)
    1. Username: leave blank
    2. Password: leave blank
  • Life:) Ukraine
    1. API: internet
    2. Username: leave blank
    3. Password: leave blank
  • Vodafone
    1. API: internet
    2. Username: leave blank
    3. Password: leave blank

  Belarus

  • MTS Belarus
    1. APN: mts
    2. Username: mts
    3. Password: mts
  • Velcom
    1. APN: vmi.velcom.by
    2. Username: leave blank
    3. Password: leave blank
    or (for subscribers of tariff plans "PRIVET" and "Communication without obligation")
    1. APN: wap.privet.by
    2. Username: leave blank
    3. Password: leave blank
  • Life:) Belarus
    1. APN: internet.life.com.by
    2. Username: leave blank
    3. Password: leave blank

  Kazakhstan

  • beeline
    1. APN: internet.beeline.kz
    2. Username: @internet.beeline
    3. Password: beeline
  • Tele 2 Kazakhstan
    1. APN: internet.tele2.kz
    2. Username: leave blank
    3. Password: leave blank
  • Active
    1. API: internet
    2. Username: leave blank
    3. Password: leave blank
  • Kcell
    1. API: internet
    2. Username: leave blank
    3. Password: leave blank

  After entering all the necessary data, you must save the changes by pressing the appropriate button and reboot the device. After that, you may also need to enable data transfer over mobile network. Now the Internet on your smartphone should work properly. Write in the comments if this guide helped you.

A modern user, when buying a smartphone, is primarily interested in the ability to set up mobile Internet. After all, it is the function of connecting to the World Wide Web that turns the phone from an ordinary means of communication into the most functional device. Download the desired application, process email, buy a movie ticket or book a table in a restaurant - the mobile Internet will allow you to complete any such task in a matter of seconds.

In our article, we will tell you how to turn on the Internet on your Android phone through two main modules:

• Network connection using 3G or 4G
• Dot tuning WiFi access

How to turn on mobile internet on your phone

The first way to access the Internet through an Android smartphone is to provide mobile operator mobile internet services. Make sure your smartphone or tablet is on the main network communication bands. Then connect the tariff that will provide you with an Internet connection. After that, you can start setting up your phone:

• Enter the Smartphone Settings;
• Select the "More" tab;
• Click on "Mobile networks";
• Set network type (4G, 3G, 2G);
• Select an access point and operator if your phone has 2 SIM cards;
• Exit to the main screen;
• At the top of the screen, pull the curtain with the main settings;
• Find the button with the name of your operator and click it.

After that, you will get access to the network. Please note that in the settings on the "Data transfer" tab, statistics of downloaded data are displayed, as well as information on the amount of traffic of applications that use the Internet connection, such as Facebook or Instagram.

About how to choose best phone 4G, you can read in our article.

How to turn on the Internet through the phone using Wi-Fi

It is equally easy to set up the Internet on your phone through a Wi-Fi access point. Make sure that the appropriate communication module is installed in your smartphone. Next, you need to go through the following steps:

• Go to Settings;
• Select Wi-Fi;
• Click on the "Enable" button;
• Select the access point to which you want to connect from the list;
• To access a closed point, you will need to enter a password.

If you repeatedly use the same access point, for example, through a home Wi-Fi router, it is no longer necessary to get into the settings. As in the case of mobile Internet, just pull the curtain at the top of the screen and press the Wi-Fi enable button.

Please note that by setting up the Internet on your phone, you can use your gadget as a router and even connect the Internet via your smartphone to a computer or laptop. Read more about this in the articles "How to connect the Internet through a computer to your phone" and "Using your phone as a Wi-Fi router".

If you have any difficulties in setting up your phone as a modem, they will help you find a solution on the forum of the official Fly website.

To access the network and further work you need a powerful and high-quality smartphone, in which the following parameters must be met:

• Large screen for full-fledged work with applications, documents and photos and videos;
• Powerful processor capable of instantly processing numerous requests;
• 4G LTE communication module for high-speed connection;
• A capacious battery that can withstand loads from running communication modules.

This combination of characteristics is fully consistent with the high-quality and affordable smartphone Fly Cirrus 9.

Why fly?

The British company Fly has been producing mobile gadgets for 14 years, in which modern technologies combined with thoughtful design and affordable price. Thus, the widest range of consumers get access to smartphones with the current version operating system Android, a powerful processor, a capacious battery, a high-quality camera, and at the same time they spend no more than 150-180 dollars from their budget.

LTE-smartphone Fly Cirrus 9 will become great solution to surf the web. The large 5.5-inch IPS screen delivers vibrant, rich colors for great ease of accessing applications, creating and editing documents, and watching videos. A powerful 1.25 GHz quad-core processor ensures multitasking and smooth interface operation. Fans of hanging out on the Web may not consider the percentage of the charge indicator, since a capacious 2800 mAh battery will keep a smartphone in working condition with a running network module for up to 6 hours.

If you find an error, please highlight a piece of text and click Ctrl+Enter.

Modern gadgets greatly simplify our lives, but what are they worth if they cannot be connected to the Internet? Yes, many users of mobile devices, smartphones. tablets and other devices, it is difficult to imagine life without access to the World Wide Web. However, the question arises, what to do if you have purchased a brand new Android phone, but do not know how to set up internet on android

Setting up GPRS/EDGE/3G/4G Internet on an Android phone

This article will help you understand not only in general terms, and will demonstrate all sorts of options for settings. Will be offered step by step actions, which will greatly simplify the task even for those who have never faced such a task before.

Where to start

Initially, you should decide what exactly you need from access to the network. This will be the starting point.

If you need network availability and mobility, this is one thing, but if we are talking about the connection speed, things are a little different. Ordinary surfing on web resources and a primitive Android update are absolutely different things and this must be taken into account.

If we talk about the first option, then everything can be done to make the Internet faster and more productive. As a rule, for this, all possible display elements on the resource are disabled through special settings.

The second option involves the so-called end-to-end connection via WiFi (that is, a wireless network). Using the second option, you significantly save not only traffic, but also money.

We will consider both options.

How to enable network access

This is the first practical step you need to take. Having mastered it, you can easily connect network access at any time and disconnect it if necessary. Consider the most common network connection options:

Connecting using a wireless WiFi network.

Here you should select the settings menu on your gadget. To do this, turn on the phone and drag the top menu with your finger down, as shown in the following figure.

Now you need to click on the gear, which will take you to the settings menu

Here, one should take into account the fact that various versions Android icons may differ, but it will still not be difficult to find it.

Now we see almost at the very top the inscription WiFi and a kind of switch on it. We need to move the slider from Off to On. In some versions, a translation is made from 0 to I. This is the same thing.

Everything, now we have an Internet connection via wireless network. Tap now on the Wi-Fi icon, you will see a menu where you can enter the necessary data for setup or select the available network options

Of course, you are unlikely to get on the free network, and therefore you need to know the password. Then you select the desired network name, for example "Megaline_1" and enter the code

Everything, now the Internet should work.

Here you should focus on the fact that there are cases when it is not possible to automatically connect to the desired network and there is a need for manual data entry, as we showed above in the screenshots. This introduces many into a real stupor, but there is nothing complicated here, especially since we will now analyze this moment as well.

Go to Settings->Net->WiFi settings. How to get here, we showed in the images a little higher. You need to add new point Access or available, but manually. To do this, you must at least know its SSID (in other words, the exact name), password and protection mode.

We will not consider the WPS key, which distributes the Internet for those who wish, in public places. If you want to give access to this network, then you don’t have to press anything.

Actually, this is where the configuration via WiFi ends.

Outcome: the option is good in principle and often free, but its main problem is that as soon as you move away from the distributing point, you lose the ability to connect and you need to look for a new source of free Internet.

This option should be used when you are at home and you have a device that distributes the Internet via a wireless network;

Setting 3G/4G/GPRS/EDGE/ and internet via ISP on android

Here things are much more complicated, especially for beginners. The task can be greatly facilitated if you have automatic network settings that the operator gives for your mobile device. If this function does not work or it is not possible to determine the device (which often happens in the case of Chinese copies of famous phones or your own models), then you need to enter everything manually.

But there is another problem - this is the need to enter exact parameters for each operator. In this article, we will provide settings for each type of popular providers.

We go to the network settings in the same way as we did with WiFi, only now we select " other networks»

And we get into such a menu, scroll down

Apparently there are 2 points below

Fill in the first paragraph

Fill out the second paragraph

That's all, now we see our Internet in the settings

There was also a very simple option for setting up using the most convenient Mobile.Yandex service. Now for some reason it either does not work, or it works, but not correctly. What was its essence:

• We select the operator you use from the list, after which the model of your smartphone or tablet is entered;
• The number is indicated in the international format;
• When you receive SMS with the necessary settings, you immediately install them in your gadget.
• After saving the settings, the Internet will work for you.

Agree that it was not very convenient way but we were able to do it ourselves and learned how to set up the Internet on android. At the same time, there is no difference whether to set up the Internet on a tablet or on a phone, since the Android OS system is the same!

How to enter parameters for connecting to a mobile Internet operator

Setting up the Internet by Rostelecom on Android or setting up the Internet on Android Tele2 is also simple. You just need to visit the official website of the required operator and enter the parameters. It will be even easier to call the operator, and he will dictate to you all the necessary data.

Outcome:setting up the Internet on Android ncc is not so difficult. But its effectiveness is many times greater than in the case of the first option. Just keep in mind that the cost of such an Internet is quite expensive and not everyone can afford to constantly be on the Internet with very expensive tariffs.

How to choose an operator for mobile Internet

A common question on the Internet, approximately the same as the question - how to set up an Internet motive on Android. Study all the offers from different operators, look at promotions, bonuses, profitable programs for providing mobile services, study all the packages and then make a choice.

Conclusion: I recommend that you use both options. WiFi will allow you to update the system, download applications, chat on Skype, even watch videos or listen to music online. And the second option is ideal for surfing the vast global network. However, do not forget that everything rests not so much on money, but also on what you want to receive from your Internet.

Thank you all if the article was useful to you say Thank you!

Do you have any questions? Ask!

Were you interested in this news?