Can the phone receive and distribute wifi. How to connect a smartphone as a USB modem

Today the Internet is used for various devices from phones to TVs. Most people have a high-speed connection at home and a Wi-Fi router that can distribute the Internet to all devices in the house. But sometimes it happens that the router fails, the line breaks, or they simply forgot to pay. And then there is an urgent need to use the information on the World Wide Web. What to do?

Android devices distribute Wi-Fi no worse than iPad (iPhone)

You can try to access the Internet from a tablet or smartphone, but the small screen does not compare with the screen of a laptop. In addition, mobile browsers do not always support all web standards like their desktop counterparts. This is where the ability of Android devices to work as a wireless access point comes to the rescue. Just a few touches of the screen - and you can use the mobile Internet on any other device via Wi-Fi. Also, modern 3G and 4G standards have almost caught up in speed, and in some places even surpassed cable connections, and tariffs allow you to fully use the World Wide Web.

There are two ways to distribute Wi-Fi from Android to other devices: regular tools and third-party programs. Let's take a closer look at each of them.

Regular funds

This feature appeared in Android version 2. Users welcomed this feature with joy, because in some cases it is very useful. The principle in the new versions of the system has not changed, the only difference is in the location of the menu items.

In most models, pure Android 4 is installed (without additional proprietary shells), so the wireless access point is turned on as follows: Settings - Wireless networks- More - Tethering mode - Hotspot WiFi access. After switching on, an information window will appear with the network name and password.

On Samsung devices with their proprietary Touchwiz shell, the settings path will be as follows: Settings - Network connections - Tethering and hotspot - Mobile hotspot. Other systems may display "Other networks" instead of "More". It is difficult to list absolutely all cases, but the principle is just that. On older devices with Android 2.3, the distribution is activated in Settings - Network - Modem - Mobile tethering.

How to enable, we figured out. Now the access point needs to be configured so that no third-party can use our limited mobile traffic. Regardless of the shell, the system allows you to configure the name of the network, method . You can also limit the number of connected users. Opposite the power slider, enter the point settings menu. In the "Setting up a Wi-Fi access point" item, change the required data. After exiting, all settings will be saved.

All manipulations need to be done only when the function is turned on for the first time. In the future, it will be enough for you to turn on the access point and distribute the Internet. The built-in functionality is enough for regular use.

Special applications

If it seems to you that it is difficult, or you are just too lazy to poke around in the settings, you can download from Play market special applications that activate the Internet access point with one click. They do not change anything in your phone, but only turn the tethering mode on and off.

osmino: share wifi for free

After installing the application, find it in the menu of your tablet or smartphone and launch it. A window will open with the name of the network and a password, which, by the way, can be disabled. You can change them if you wish. Press the "Give" button and you can. In the menu, the icon will become of blue color with the slider moved to the right. To stop the distribution, re-enter the program and click "Stop distribution". The icon will turn black and the slider will be moved to the left.

WiFi hotspot (widget)

A small program that has a desktop widget for quickly enabling and disabling the wireless modem mode on Android device. Allows you to change the widget color and icon size, enable or disable data transfer, and start Wi-Fi after the distribution is disabled.

A modern telephone can perform a wide variety of functions, thereby replacing a large number of other devices. For example, a phone can replace a Wi-Fi hotspot. To do this, you just need to configure the distribution of Wi-Fi from your phone to other devices.

How to share Wi-Fi from an Android phone

In order for you to open the Android settings. You can do this by launching the Settings app from the list of all installed apps. You can also open settings using the top curtain or desktop icon.

After opening the settings, you need to go to the "Other networks" section. It should be noted that this section may have a slightly different name on your phone. If you cannot find this section, look through all the settings sections that are next to Wi-Fi settings and bluetooth.

Next, open the subsection with the name "Modem and access point". Again, on your device, the name of this section may be slightly different. It may be called "Modem", "Tethering Mode", "Access Point Connection", or simply "Access Point".

After that, you must activate the "Portable Hotspot" feature. To do this, move the switch to the "On" position.

After activating the portable hotspot, you will see a pop-up window warning you to turn off Wi-Fi. In this window, click on the "Yes" button.

This completes the setup, now your phone is distributing Wi-Fi. You just have to see the password to access the Wi-Fi network created by your phone. To do this, open the "Portable hotspot" section.

After that, a window with information about the access point will open in front of you. Here you can view and change the hotspot name and password.

How to share wifi from ios phone

If you have an iPhone, then in order to set up the distribution of Wi-Fi, you need to enter the settings and open the "Modem Mode" section. If this section is missing, then this may mean that mobile Internet is not enabled or configured on your phone.

In this section, you need to activate the "Modem mode" function. To do this, move the switch to the on position.

In the same settings section, you can see the password that you need to use to connect to Wi-Fi.

On this iPhone setup finished. Now you can connect to the created Wi-Fi network.

How to share wifi from phone to windows phone 8

If you have a phone based on the operating Windows systems Phone, then in order to distribute Wi-Fi you need to open the "Settings" application.

After that, you need to open the "General Internet" section.

On this setting Windows phone completed. Wi-Fi network is working and you can connect to it.

Modern tariffs of mobile operators and quality mobile internet allow you to use the latter not only from smartphones or tablets, but also organize distribution for home PCs or laptops. This state of affairs is especially relevant in regions where there are 4G and LTE coverage areas. There remains a small questionto other devices. Let's talk about this in more detail.

Distribution settings from an Android device

The need to distribute the Internet from a mobile may arise for various reasons. Most often, users use these features of smartphones when or simply stops working. Before proceeding with the settings, make sure that the quality of communication and the speed of your mobile Internet are at the proper level, otherwise the idea will be a failure.

Today, several configuration options are available for Android devices: via WiFi, via a USB cable, or as a Bluetooth tethering. Moreover, the second type of connection is not suitable for distributing the Internet to several devices at once. Let's take a closer look at the configuration features of each type of connection.

Via WiFi

This option for organizing the distribution of the Internet from the phone is the fastest and easiest. In this case, the smartphone acts as a router and, with the proper signal level, will be able to provide several devices with access to the network at once. If the phone has only 3G, then you should be prepared for the fact that the connection speed on the PC will be quite low.

Follow these steps to set up distribution.

After that, the access point will become active and devices will begin to see it. To connect to the network, you must specify a password. You can find out the combination in the WiFi access point settings. Open the section and under the password field, check the box in the "Show" parameter. After that, the symbols of the protective combination will become visible.

USB modem

If you have a cable at hand, then one of the devices can be provided with access to the network. Let's figure it outhow to share internet from phoneusing this kind of setting. There is one small device, special drivers are required to organize the process. Usually, when you turn on the desired mode, they are installed independently, if this does not happen, the user will have to find and download them separately. The software googles without problems through the indication of the phone model and the problem that has arisen.

To set up a connection, follow these steps.

This completes the settings on the smartphone side and you need to go to the computer configurations. Open the network connection settings menu, on the icon "Connect via local network» Right-click and select Enable. After that, the computer will be connected to the Internet through your smartphone. Make sure that the amount of available traffic will allow you to fully work on the network from your computer.

Bluetooth modem

Another option is to access the Internet by connecting via a Bluetooth modem. We learnhow to share internet from phonein this case. There are also some subtleties here. Before setting up, make sure that the Bluetooth module is active on all devices. And also open the visibility of the smartphone to search for available gadgets. These settings should be checked additionally before proceeding to the main one.

Further process, the following.

1. Open the smartphone settings and go to the "Tethering" section. The path has already been detailed previously.
2. In the window that opens, put a tick in front of the "Bluetooth modem" item. This completes the manipulations on the part of the mobile device.
3. On the computer, open the "Control Panel", go to "Devices and Printers" and click on the "Add Devices" command.
4. As soon as the computer detects the smartphone as a device available for connection, you must confirm pairing and give permission to use the device as a Bluetooth modem.
5. Then, in the "Devices and Printers" section, by right-clicking on the smartphone icon, we call up the context menu and in the "Connect via ..." setting, select "Access Point".

This completes the connection and the computer has access to the Internet through a mobile gadget.

If we compare all three types of connection, then WiFi will be the fastest and easiest. But it is quite energy-intensive, so if there is no outlet nearby, it is better to use a USB modem, in this case the battery consumption is less, but the connection speed is slightly behind the previous one. Connecting in the third way should be used only as a last resort, when the previous ones are not at all suitable. The connection speed in this case is very low and it will take a long time to wait until the page loads.

How to distribute the Internet from a phone: settings for the iOS platform

Now let's figure out how you can organize the distribution of the Internet from an Apple mobile device. The instruction is suitable for the latest versions software and on older firmware may be irrelevant.

First of all, you need to make sure that the smartphone itself has access to the Internet and the signal quality meets the established requirements. In this case, the cellular network icon in the settings section will be green.

1. Go to your iPhone settings and select Cellular.
2. Open the "Modem mode" and activate the function by placing the switch in the appropriate position. Some tariff plans of the mobile operator may block the possibility of distribution, in which case the switch will be inactive.
3. After successful activation, instructions will appear on the smartphone screen for connecting the PC to the network in various ways.
4. Connect your computer.

To connect via WiFi, just find the access point and enter the password. To use a USB cable for connection, you will need to install latest version iTunes apps and establish trust between devices. Only a computer or an Android smartphone can be connected to the iPhone via Bluetooth, it is better to connect iOS devices via WiFi.

In this article, step-by-step instructions on how to distribute the Internet from Android. This article describes setting up a WiFi hotspot on Android 6.0, however, on android versions 5 is done in the same way. And even on the version of Android 4 in general the same way.

Similar articles for others operating systems:

What you need to distribute the Internet from Android

In order to distribute Wi-Fi from Android, you need a device running Android OS. And this device must have two network interfaces - a cellular 3G or 4G module and a WiFi module. It can be a phone (smartphone) or a tablet. But not any phone (smartphone) or tablet will do.

There are phones without a WiFi module. There are tablets without a 3G-4G module.

In 2016, there are probably no such smartphones that do not have a WiFi module, but there are tablets without a 3G-4G module. So, if you have a tablet, check if it has a 3G or 4G module.

Term hint

• Tap, tap- short touch with your finger touch screen. Similar to left clicking on a computer.
• Long tap- Touch with finger hold. Similar to right clicking on a computer.
• Swipe- movement of a finger (or several) on the touch screen. Swipe, for example, scrolls the contents of the screen on mobile devices. Or the output of additional control panels (swipe from the top or from the side edge of the screen).

android wifi hotspot

The article is written on the example of a custom version of Android 6, called Freeme OS, version 3.08. But on other custom releases, everything will be the same.

Need to open" Settings", and there to find a group " Wireless networks". In this group, find the item " More"and tap on it:

In the screen that opens More"you need to tap on the item" Modem Mode":

On screen" Modem Mode"you need to tap on the item" WiFi hotspot":

Full path: " Settings - Wireless networks - More - Tethering mode".

And this screen already shows information about current state access points. There is also a switch and access to the access point settings. To change the name, password or encryption type, you need to tap on the item " Setting up a Wi-Fi hotspot"::

In the settings screen, you can change the name of the access point. Encryption type. Password. Set a limit on the number of connected clients. In some smartphone models, you can also change the operating frequency of the access point.

Most importantly, after making changes, do not forget to tap on the "Save" button at the bottom of the screen:

When the hotspot is working, " WiFi hotspot", a list of connected clients is shown:

Note. Option " Save hotspot"governs automatic shutdown access point if not in use. This option sets the period of inactivity after which the access point will be turned off.

If you will be connecting multiple devices, you can specify a speed limit for each connection. So that one of the connected clients does not pull out all the available speed. This is done via the "Bandwidth Usage" option (previous illustration), tapping this option will open a new screen:

This figure is the speed limit for each connection.

What number to indicate? Example:

1. The device receives the Internet (via 4G or 3G modem) at a speed of 15 Mbps.
2. 3 clients will be connected to the access point.
3. If you set a limit of 5 Mbps, this means that each of the three clients at the same time will be able to receive the Internet at this speed.

Hotspot Management Android

It is most convenient to turn the access point on and off not through the screen in the settings, but through the Quick Actions curtain:

This curtain opens with a swipe two fingers from the top of the screen.

Or two successive swipes with one finger. The first swipe opens the notification curtain, the second swipe opens the action curtain.

Note: Of course, put the password more complicated than 12345678. And do not forget that the minimum password length for WPA2 is 8 characters.

Note 2: If this access point will connect Windows computer XP SP2, then you need to install the "WPA" security protocol. Since Windows XP SP2 does not know how to work with the "WPA2" protocol! However, not all devices have a large selection of encryption methods!

Note 3: In the future, you will not need to re-configure the access point, it will be enough just to turn it on.

Phone or tablet as a WiFi hotspot

Using your phone or tablet as a WiFi hotspot is very convenient. It turns out in the truest sense of the word a mobile access point. And more practical than WiFi routers that sell cellular operators. You can use such a router only as an access point. And you can also make calls on the phone, you can browse websites from a tablet, write letters using e-mail and so on.

Of course, there are not many settings for the access point on Android, much less than on a specialized WiFi router. However, this is much more than available, for example, on Windows 10 Mobile - only the username and password can be changed there.

WiFi network protection

Ivan Sukhov, 2016

If you found this article useful or just liked it, then don't be shy - support the author financially. This is easy to do by throwing money on Yandex Wallet № 410011416229354. Or on the phone +7 918-16-26-331 .

Even a small amount can help writing new articles :)

The need to distribute the Internet from a phone to a laptop or other devices is quite common. For example, in those places (in the country or in remote areas) where there is network coverage, but the prospects for a wired connection are not observed even in the foreseeable future. In such cases, the problem could be solved by connecting your PC to the Internet via a smartphone. But how to distribute Wi-Fi from Android? We will talk about this now.

Actually there are several possible ways, with which you can connect your computer to the network using . The cost of the service, the amount of traffic, and settings can be obtained from your telecom operator.

This method is the easiest to set up and is suitable for any combination of devices that we want to connect. Its essence lies in the fact that the mobile gadget will be used as a wireless router, which is especially important when you need to connect several devices to the Internet at the same time.

So, we put the smartphone into Wi-Fi modem mode:

Having opened the settings, we find the "More" line, from there we go to the "Tethering mode" window and put a tick in front of the "Wi-Fi access point" line (on some devices this may be a virtual switch that needs to be set to the "on" position), and click "Access Point Settings":

In the settings window that opens, enter the network name (arbitrarily), then the protection method (the most optimal WPA2PSK), it remains to set a password and save the settings:

How to share internet from android via usb

After our Android device is connected, as in the previous method, through the "Settings" go to the item "Wireless networks", click "More" and get into additional settings. Select "Modem mode" and check the box "USB modem". If your device model has a “Save” button, then click it:

Now a new connection should appear on our laptop (netbook, PC). To activate it, open the window with network connections, right-click on the "Local Area Connection" item, and select the "Enable" item in the drop-down context menu:

How to connect Android to a computer as a Bluetooth modem

To create this connection, we repeat the path described above: "Settings", then, "More ..." and "Tethering mode". Only this time we select "Bluetooth modem". In the Bluetooth settings on our smartphone, we must make sure that our Android device is visible to other devices.

Now we need to check the activity of the Bluetooth interface in Windows. To do this, we need to open the “Control Panel”, and in the window that pops up, click on “Add a device”. This will start searching for devices that are currently available for connection via Bluetooth.

After our phone is detected, its icon should appear in this window, by clicking on which we will open a window with a code, and a request will be displayed on the smartphone, click the “Pairing” button, and then it remains to allow the phone to be used as a Bluetooth modem (click on the "OK" button):

After completing this procedure, right-click on the icon of our smartphone in the "Devices and Printers" window. It remains to select "Connect via" - "Access point" in the context menu:

The test results showed a significant superiority in the speed of the Wi-Fi connection, however, in an environment where there is no electricity, it is preferable to choose the USB connection as the most energy efficient.