Go to 3 gee. How to set up mobile Internet on Android: instructions and life hacks

And this problem is still solved! It is enough to set up 3G Internet on Android. How to do it - read this article.

Note - although EDGE is not a de jure second generation network (it is a GPRS network), but since it uses a set of frequencies close to GPRS, we will call it 2G hereinafter.

Does the Android device support 3G?

The first thing that will be required from those who want to set up 3G on their Android smartphone or tablet is to make sure that this device supports the appropriate networks. It would not be insulting, but many even modern devices are not equipped with this module, and therefore can only work in networks of the second generation - EDGE.

Especially often the lack of a 3G module affects budget devices (costing several thousand rubles) and old devices (for example, under Android control 3.3 and below).

How to do it? Need to find it on the internet specifications your device and note the supported networks. If indicated there only"850 MHz, 900 MHz, 1800 MHz, 1900 MHz" (or any set of these frequencies), then there is no 3G module in the design. And there is at least one frequency above 1900 MHz, which means that it will be possible to use third-generation networks.

In addition, the device must be certified to work in Russia, since Russian 3G networks have their own frequency spectrum.

Setting up 3G in Android

The next step is the detailed configuration of Internet access. Of course, all this is done through the Settings app.

And then it becomes clear why the smartphone must be certified to work in Russian networks. After the first connection to the Internet, the operator can send automatic settings. They need to be saved and installed.

So, you need to go to "Settings", there find the item "More" exactly under the item "Mobile communications" or "Data transfer", find the item "Mobile network" in it and already there conjure with 3G parameters.

Operator setup

The first thing to do is to choose an operator. It must correspond to the operator from which the SIM card is installed in the phone. To do this, go to the "Communication Operators" item.

The ideal solution is to click once on "Automatic". Then the smartphone will independently connect to a compatible operator using the data stored on the SIM card. If he stubbornly refuses to connect, you need to select the "Manual" item and there already find your mobile provider.

It is clear that if a SIM card from Beeline is installed, then you need to select Beeline. By the way, smartphones from this yellow-striped operator are already supplied with Internet settings configured. But this is their only advantage. You can read more about them in the relevant articles - and.

Setting up an access point

The next step is setting up an access point (APN). Does this in a paragraph, obviously, "Access Point". If the corresponding parameters “arrived” automatically, then this will not be difficult. It will be enough to select an access point called "Internet".

If they did not arrive automatically, then it is already somewhat more complicated. In the "Access Point" item, you need to press the "Menu" button and select " New point access". Then fill in the table that appears, strictly following the instructions of the operator. To find out the parameters, you should call the support service.

After that, you need to select the newly created access point as the default access point and you can use the Internet!

Priority

If you want to use only 3G, then you need to look at the "Priority" or "GSM / UMTS network settings" item. By default, it is set to "GSM/WCDMA". This means that the smartphone will seek to connect to 3G, but if it does not find this network, it will switch to EDGE. If you select "Only WCDMA", then the smartphone will only be connected to 3G, and if it does not find this network, then there will be no Internet.

Setting up 3G on Android may seem a bit complicated. However, the vast majority of smartphones are already pre-configured out of the box or receive automatic settings. And it is enough to complete this setting once - and you can use the Internet for the rest of the time.

Editor's Choice

Alcatel Idol 5 is a smartphone with a good aluminum body and Full HD display. It received the Android 7.0 platform with...

Smartphone Nokia 6 stands out from the background of conventional models, and the point here is the interface. The manufacturer has put a lot of effort into...

Internet not working on Android? In the article we will talk about how to set up the Internet on Android. Many Android users do not know how to connect the Internet on Android, but meanwhile, everything is quite simple. First of all, you need to decide what you want to get from accessing the network.

This may be the mobility and availability of the network, or, alternatively, the speed of the connection. Simple surfing on sites and things are different. In the first case, you can disable the maximum displayed elements of sites, and in the second, you need a pass-through WiFi connection, which will save traffic and money. This article will cover various ways internet settings on android. So, how to install the Internet on Android?

How to enable network access

To begin with, we will tell you what smartphones, tablet computers and other android gadgets can do in terms of connecting to the Internet. That is, how to turn on the Internet on Android. There are at least three common ways to access the World Wide Web on an Android device:

1. To plug wireless network WiFi.
2. Set up 3G Internet through a communication provider.
3. Run GPRS setup through the same mobile provider.

You can configure each type of connection in the Android settings:

We list the main features, advantages and disadvantages of all three ways access to the network. Let's start with the WiFi connection.

The advantages of Wi-Fi include:

• Free access. Free use is that you can find a public hotspot or save on mobile traffic, which costs more by doing
• Higher speed in relation to other types of connections.

Disadvantages of WiFi connection:

• Not everywhere you can find a free public wifi hotspot access.
• To set up a network at home, you need to buy a router (in principle, you can do without it if your laptop or computer has a Wi-Fi module)

Mobile Internet 3G (and partially 4G) is an alternative to WiFi. Moreover, 3G can be considered the main way, since 3G can be used where there is coverage, and operators are developing their own 3G networks. In Russia, 3G is offered by Beeline (beeline.ru), Megafon (megafon.ru), MTS (mts.ru) and Skylink (skylink.ru). All have their own rates and disadvantages.

The benefits of 3G include:

• Mobility and coverage.
• 3G coverage is increasing and today is quite common.

Disadvantages of 3G connection:

• Price. The disadvantage is conditional, since this is the most flexible Internet connection for mobile devices.
• Speed ​​and quality of data transfer. Unfortunately, not everything is so smooth.
• Cell phone scam. Unlimited tariffs are not so unlimited: after a certain amount of traffic is exhausted, the speed is usually cut to the minimum and it becomes almost impossible to use the Internet.

The last connection type is the ancient GPRS standard. Android devices still support it and it can come in handy where the first two types of connection are not available. For example, in the taiga, to send your friends a photo of a bear running at you. It can be said that this the only advantage of GPRS. Certainly, disadvantages of GPRS on the face:

• Low internet speed.
• All the same cunning tariff plans.
• High price.

On this, we have finished with connection types on Android, let's move on to practice. Since we have already given a link to setting up WiFi above, those who are interested can read the article and even ask leading questions -. Let's go through the 3G Internet in a little more detail and figure out how to set up 3g on android.

Internet setup via 3G

Setting up 3g on a tablet is no different from setting up on a smartphone or any other android gadget. If you want to use the network all at home, for example, and turn on traffic jams on Yandex, then 3G is just right.

The main difficulty in setting up 3G Internet on Android is to set up a connection for your operator. Manual and correct setting very important because it will help to avoid mistakes and loss Money. Android can apply the settings automatically by turning on roaming, for example, which is not good. Therefore, in order to set up 3G correctly, you need to know the following:

There are two ways to connect to 3G: automatically find an access point and create an APN point manually. In the first case, if you want to connect the network automatically, do the following. We go to mobile networks:

Setting > Wireless connection> Mobile networks

We select the automatic search for mobile operators and find our operator. After a while, network settings and MMS support will be added to "Internet Access Points" . It remains only to go to this menu item and check by activating these settings.

The second method involves creating an APN manually. We go to:

Settings > Wireless > Mobile networks > APN (Acces Point Names or Internet Access Points)

Your operator's website must have the initial data that you need to specify in the created point. For example, we provide data from MTS, pay attention to the highlighted items, the rest of the parameters should be left by default:

As you can see, you need to activate the name, APN, login and password. It is worth noting that for some android gadgets, for example Fly, Huawei, Lenovo, the Authentication Type field will default to Not Set. For the correct operation of the mobile Internet, you need to use the "No" parameter. Finally, a small hint that may be useful to you in the future to connect the Internet on Android:

We hope our article on how to set up the Internet on Android came in handy and everything worked out for you. Come on!

3G is a great way to connect to the internet for android smartphone but. With the help of 3G, you can get a connection speed sufficient for comfortable watching videos on the Internet, as well as fast loading of even the heaviest web pages. In this article, we will talk about how to enable 3G on an Android smartphone.

How to enable 3G on an Android smartphone with a standard shell

If you are using a smartphone with a standard Android shell, such as Google Nexus, then in order to enable 3G you need to follow the next steps.

Step #1. Open Android settings.

You can open the settings in any way convenient for you. For example, using a shortcut on the desktop or using the top curtain.

Step #2: Open the "More/More" section.

After opening the Android settings, you need to go to the section with additional settings. To do this, select "More/More".

Step #3. Go to the "Mobile network" section.

After opening advanced settings you need to go to the "Mobile network" section.

Step #4. Open the "3G Service" section.

The next step is to open the "3G Service" section.

Step number 5. Turn on 3G and select a provider.

Step number 6. Turn on the automatic selection of the operating mode.

After turning on 3G, in the "3G Service" section, the item "GSM/UMTS network settings" is activated. Open it and in the menu that appears, select "GSM / automatic mode".

Step #7

You also need to configure APN access points (if they have not been configured before). Without APN settings, the Internet on the smartphone will not work. In order to configure the APN, return to the "Mobile network" section and open the "Access Points (APN)" item. You can get more information about setting up APN in the technical support of your mobile operator.

How to enable 3G on an Android smartphone with a Samsung shell

If you are using an Android smartphone from the company Samsung then to enable 3G you need to do the following steps.

Step #1. Open Android settings.

First you need to open the Android settings. This can be done using the desktop shortcut, the program list, or the top curtain.

Step number 2. Open the "Other networks" section.

After opening the settings, go to the "Other networks" section. This section of settings is located on the "Connections" tab.

Step number 3. Go to the "Mobile networks" section.

Step number 4. Turn on "Mobile data" and change the network mode to "WCDMA / GSM (automatic connection)".

In the "Mobile networks" section, you need to check the box next to the "Mobile data" item. If you plan to use 3G in roaming, then you also need to check the box next to "Data in roaming". After that, you need to open the “Network Mode” item and select the “WCDMA / GSM (automatic connection)” option.

Step number 5. Set up APN access points.

You also need to set up APNs. Without them, neither 2G nor 3G Internet will work. To do this, open the "Access points" section (in the "Mobile networks" section) and add an access point with the settings suitable for your mobile operator. You can learn more about setting up APN in the technical support of your mobile operator.

Already highly developed, and the communicator can be used as a 3G modem. Many users are aware that it is possible to replace the slow Internet on the device with a faster one. Naturally, there was no such possibility before, but the needs of users gradually grew, and, accordingly, the new technology connections from cellular operators. To replace slow internet GPRS came to EDGE and is now the standard. In fact, the Internet has significantly expanded the possibilities for users, as it has increased along with the innovation. Today we decided to talk about how to enable 3G on Android, because many device owners are not even aware that this is possible. However, there is always a desire to get high speed Internet.

new standard

To date, almost all new mobile devices have the ability to use third-generation networks, this can happen both in the mode of Internet connections and for calls. If you are interested in the question of how to turn on 3G, then now we will tell you.

Green robot

If you are the owner of a mobile device that runs on the Android platform, then it certainly has a 3G option. When you want to go online using this connection for the first time, most likely you will see a message stating that the function is inactive or not configured correctly. Don't panic, because before you can access the internet on your device, you'll need to set it up. Accordingly, you have a question about how to connect 3G to Android.

Operator selection

In order to make settings on your mobile device, you first need to check if you have Internet traffic in your tariff. You can do this in the relevant sections, depending on the operator you are using. If you do not have Internet access, then we recommend that you connect it, because if you use the network without an active package, then you can spend a tidy sum. When you switched to a new tariff with data included in it, but your mobile device still refuses to open access, then you should find out how to turn on 3G on Android. This is done very simply.

Setting process

On the desktop of the mobile device, you need to find the settings section, this is where we will connect the Internet. Naturally, it all depends on your firmware version in the device, but you can find this menu. In order to enable 3G on Android, you will need to open the corresponding section in the settings, which is responsible for in most cases, this item is equipped with a Wi-Fi icon. When you have managed to jump to the specified function, you should specify APN settings, in most cases this section can be hidden under the inscription "additional" or "more". Now you will need to enter an access point. You need to do this, starting from the mobile operator you are using. If you regularly use the services of two companies, for example, if your device supports two SIM cards, then, accordingly, you will need to make settings for each of the numbers. However, when connecting to the Internet, you yourself can choose one of them. Before you go to the access point settings, you definitely need to check the box next to the settings, so you allow your mobile device to transfer data using mobile network. After completing these steps, you will need to enable the 3G function on your mobile device. But first you need to fill in all the required items in the APN section. If you do not know what you need to indicate there, then you can contact your mobile operator. As we wrote earlier, each has its own settings. You do not know how to enable 3G on "Android"? Then you can find all the necessary information from the mobile operator. The name that you will specify in the new profile can be absolutely anything, since this data is not sent to the network and serves to quickly and conveniently connect to the desired access point.

How to enable 3G on Android: conclusion

You can create several profiles for each SIM card, everything will depend only on your preferences. After you have set up the network and want to go online, you need to turn on 3G. One more fact should be mentioned, since in the material we focused on working with smartphones. Modern tablet computers running Android also allow you to access the Internet via Wi-Fi and 3G. In this case, the setting is carried out according to instructions similar to the one we considered in the example. mobile phones. It should also be noted that modern tablet computers are capable of automatically activating mobile Internet.

Connecting 3G Internet is real for every subscriber of the MTS cellular network who wants to have permanent opportunity to access the network without any difficulties and restrictions. The fastest coverage today is the 4G network, but 3G is the most popular among the population due to its large-scale distribution and economical cost. Not everyone can figure out the connection and installation problem, so our article is designed to help you figure out all the settings.

Activation methods on modem devices

There are several options that can help people understand the modem device and its functionality. How to connect 3g to MTS:

1. By text message.
2. Using the services of an Internet assistant.
3. Through a special application "Service MTS".
4. Send a request like * 111 * 18 # .

Regardless of the option chosen, the connection will occur at speeds up to 45 Mbps. The setup process itself is very simple - for this you need to perform the following steps:

1. Buy a 3G modem in a specialized store and a SIM card that has Internet access and is able to connect from the modem.
2. The SIM card is inserted into a device that is connected to a laptop or computer.
3. Next, you need to wait until the computer downloads and installs the program to access the network.
4. In order to be able to constantly connect to the Internet, you must enter the PIN code indicated on the packaging of the starter package of the card. As a rule, one input is enough: in the future, the connection will occur automatically.

Setting up 3G on phone and tablet devices

Mobile Internet has long been very popular among the population. MTS on a phone or tablet is configured by general principle and includes the following actions:

1. Specify access point: Internet.mts.ru
2. The username can be anything, but the base name is usually "MTS".
3. The password set by the system is usually the same as the name, but a person can change it at will.

To complete the setup correctly, you need to restart your smartphone or tablet, and then try to connect the Internet to MTS. If the procedure fails, you can call service center operator and order automatic parameters that will be sent in the form of an SMS message, and in the future are subject to mandatory storage in the memory of the mobile device.

Possible activation difficulties

If the subscriber has installed all the necessary settings or ordered automatic ones, but the Internet still does not appear, then perhaps the fact is that the funds have run out on the account or there is no connection or 3G network coverage in the place where the person is located. Sometimes it happens that the tariff that is used on the SIM card in the modem contains unprofitable subscriptions that take money from the balance, or unfavorable conditions for accessing the network. To correct the situation, it is recommended to use personal account on the main website of the MTS mobile company (registration is free), where you can choose any other tariff and switch to it there. Payment for the transition will be debited from the account at the time of activation of the new tariff plan. If, however, there are difficulties in technical installation then you need expert help. It can be obtained either on the website online or in the operator's help desk (calls are free at any time of the day).