Railing systems for the kitchen: types and installation instructions. Self-installation of the roof railing Scheme of fixing the roof rack in the kitchen

Install railing in the kitchen with your own hands is not difficult if you have a certain skill and necessary tools... Let's consider the standard option: fastening round railing with a diameter of 16 mm on the wall. The wall or apron can be made of wood (chipboard, MDF), glass, plastic or ceramic tiles... They are usually installed in places where kitchen utensils are most often used, that is, near the sink and near the stove. Install a kitchen rail better at chest level, at a height of 45-50 cm from the table top. If there are mounted kitchen cabinets, rail systems hang at a distance of 5-7 cm from the bottom shelf of the upper cabinet.

Drilling holes for holders

To begin installation of roof rails to the kitchen, it is necessary from the marking of the holes for the holders. For this you need a pencil and building level... The number of railing holders is determined by the length of the railing itself. If the kitchen rail is longer than one meter, for safe use railing system in the future, there should be at least three fasteners to the wall. You can shorten the railing tube with a hacksaw for metal. Having decided install kitchen rails on both sides corner kitchen, connect them in the corner with a special corner connector.

After marking, start drilling the holes. For drilling ceramic tiles or glass, use a diamond drill, a special drill for tiles and glass, or a victorious drill, after disabling the hammer mode.

various drill bits for tiles

Installing the railing holders

Insert plastic dowels into the holes formed (the fasteners must be included with the railing holders). Next, insert the self-tapping screw into the bushing and fix it in the installed dowel, by this action you will fix the bushing on the wall.

The next step in installing the roof rack in the kitchen is installation of railing holders, which are a rectangular or tubular piece with two holes, large for the railing, small for the bushing. Slide the holder onto the bushing and use the small screws and an Allen key to fix the railing holder to the bushing. In this way, secure all holders. Position the holders so that the screws are at the bottom so they cannot be seen.

Further in installed holders insert railing so that the ends of the tube extend evenly beyond the extreme holders. Fasten the rail with screws and hex wrench. Corner rail connectors (90 * or 135 * arc) are attached without holders and connect the straight railings to each other.

railing holders and corner connector

Installing decorative caps on the ends of the rail

The final stage in railing mount in the kitchen is installation decorative plugs on the ends railing. Cover for kitchen rail consists of two parts, fastened together with a screw. Connect the two pieces together and hammer the plug into the hole in the rail. In order not to damage the decorative upper layer cover caps for railing, hammer it in with the wooden part of the hammer. Now it only remains to add rail system various

Every person at least once in his life has seen a car on the roof of which roof rails are installed, i.e. special slats (skids), with the help of which the transportation of bulky household goods is carried out. In addition, roof rails allow you to transport on different distances sports equipment and tourist equipment... Often such additional elements used as a base for car boxing. It should be noted that the installation of roof rails on the vehicle gives the interior a sporty look and makes the vehicle more individual.

Types of roof rails and types of their placement

Today, in numerous specialized stores, a variety of both model and universal roof rails are presented. Their difference lies in the fact that model fixing elements are made for a specific brand of car, so it is not possible to mount them on other cars. Universal fastening elements are designed for installation on most modern vehicles of domestic and foreign manufacturers... There are two types of roof rails placement: transverse and longitudinal.

Components of car rails

A standard rail consists of the following elements:

The main pipe, the diameter of which most often varies from 25 to 51 mm.
Holders (2 pcs.).
Plugs (2pcs).

Materials from which the roof rails are made

Anchoring elements can be made of plastic, steel or a combination of these materials. A layer of specialized powder paint that minimizes the negative impact high humidity, ultraviolet radiation and changes in ambient temperature.

Installation procedure

Practice shows that it is best to entrust the installation of roof rails to specialists who have professional knowledge and a sufficient amount of experience in this matter. In addition, station workers Maintenance are responsible for the quality of the work performed, therefore, if any defects are detected, their elimination will be carried out at their expense.

If for some reason it is not possible to contact the specialists, then you can try to install the roof rails yourself. The first thing to do in the case of installing fastening elements with your own hands is to find out if there are seats for them on the roof of the car. If such holes are provided in the car structure, then they are hidden under protective plugs, which are quite easy to remove. To do this, pull the plugs in the direction indicated by the arrows on them and pull them up. Further, regular holes must be cleaned of dust particles and degreased, after which a layer must be applied to the seats silicone sealant used for outdoor use. If the holes are not carefully sealed, there is a high probability that moisture will get into the interior of the car over time. At the final stage, the roof rails are attached to the prepared surface of the car body.

It is much more difficult to install roof rails on a car, the design of which does not provide for the presence of standard holes for fastening elements on the roof.

Immediately before installation, it is necessary to carry out preparatory work, namely:

Thoroughly clean the roof of the car from dirt and dust;
Degrease the body surface to which the roof rails will be attached;
Remove the headliner.

After execution preparatory work you can start drilling holes in the body. In order not to have to drill extra holes, it is necessary to carefully calculate the places of future seats for the roof rails. Protect paintwork body from hot chips that are formed during drilling, you can use masking tape, which must be glued to the roof surface around future holes.

Operating rules

In order for car rails to serve as long as possible, motorists must follow simple rules:

It is recommended to transport the first load on the fastening elements no earlier than 24 hours after their installation;
Before each trip, you need to check how firmly the roof rails are attached to the car body;
Cargo transported on rails must be evenly distributed over them and carefully secured;
The maximum carrying capacity of the roof rails must not be exceeded.

Compliance with the last paragraph of the rules is most important.

Experts do not recommend transporting cargo on rails, the weight of which exceeds 70-80 kg, because overloading can cause the most negative consequences, from a skewed vehicle roof to deformation of doorways.

If any difficulties arise during the installation of roof rails, then there are at least two ways to solve any problems:

seek help from third-party specialists;
to examine step by step photos and videos on self-installation of fastening elements on the roof of a car.

Video

Installation of Voyager roof rails on TOYOTA Land Cruiser Prado 150:

Photo

The issue of creating coziness in the kitchen and providing convenience there can be solved in different ways. For example, by placing a variety of trinkets, napkins, bouquets, or vice versa - by excluding all unnecessary objects from the field of vision. But there is one thing that proponents of either approach will undoubtedly enjoy. This is a railing system.

Installing roof rails in the kitchen will allow you to get rid of unnecessary running around in search of the necessary, at the moment, kitchen utensils.

What is railing

This fashionable foreign word is a metal or plastic tube fixed to the kitchen wall, on which various shelves, nets and hooks for storing kitchen utensils are suspended. The railing is fastened in the kitchen using special brackets and does not cause any difficulties.

Benefits of using a rail system

They are as follows:

lack of randomly lying kitchen utensils;
all the necessary things are always in sight and within reach;
the ability to easily and quickly outweigh from place to place any shelves and hooks, and with them kitchen appliances
practically does not require maintenance - it is enough to wipe it with a rag from time to time.

Types of roof rails

These designs are classified into two main types:

Multi-tiered. (Used, as a rule, not large kitchens, are mounted on a free section of the wall or between cabinets);

Long. (They are used in kitchens with large area, or where instead of wall cabinets hinged shelves for the kitchen).

Organize usable space a lot of gadgets help in the kitchen. And the most favorite of them is the metal rail. From the moment of his appearance, the hostesses sighed calmly - now there is always a place for kitchen utensils. The rail is especially convenient for small spaces, on which it is difficult to place spacious wardrobes. Therefore, some of the things can be safely hung on the railing. Installing the railing is quite simple, as you will see further.

Railing is a metal structure in the form of a pipe that is attached to the wall. Various accessories - holders are hung on the pipe. This perfect fit for storing various things. The rails can be used to hang kitchen utensils, holders for oils and spices, towels, boards and much more.

Roof rails can be of several types:

horizontal;
vertical;
suspended;
magnetic.

Horizontal roof rails are the most popular and common design. They are mounted horizontally to the wall and usually run along the working area between the table and the wall cabinets.

Important: in small kitchens, you can run a horizontal rail along all walls. On such a railing, you can place most of the things that should be at hand. On the walls opposite the working area, the roof rails should be at such a height that they do not touch them when driving.

Magnetic roof rails serve as a modification of the horizontal one. They are designed to hold metal objects without hooks. They don't need accessories - they usually carry knives and cutlery. The installation of such roof rails is carried out above the work table at the hostess's hand.

Vertical rails are attached in the area of the bar counter or as separate structure for storing things. It connects the ceiling and shelves, countertops, or stretches to the floor. Various accessories are hung on it - holders for bottles, glasses, cups, hanging shelves.

Installation of wall rails is ideal in large kitchens where the work area is made in the form of an island. These roof rails are fastened to the ceiling. Any accessories are hung on it.

Which rail to choose is decided individually, depending on the design of the room, its area and personal preferences.

pros

These simple metal structures there are a lot of advantages in the kitchen.

They are convenient because:

all things are at hand in a conspicuous place;
you can swap them, organizing a comfortable space;
free space in the table and in cabinets for storing other things;
the space in the kitchen ceases to look cluttered, order is created;
easy to care for.

You can zone the space with roof rails, organizing different work zones. On the rail along the sink, you can install soap accessories, detergents, towel. On a horizontal rail along the working area there are accessories-holders for cutlery, spices and butter, and on a magnetic one - knives. You can hang pots on the vertical rail between the stove and the wall.

Types of accessories

Before placing the railing, you need to decide what accessories are available for them. And a great many of them have been invented.

Currently available for purchase:

shelves;
towel holders;
containers for bottles;
containers for spices;
dryers for plates and cups;
containers for spoons;
hanging hooks;
bread bins;
baskets.

Accessories in the kitchen can be swapped, removed.

Manufacturing material

The material for the manufacture of the railing is always metal - steel. But it can be coated with various other types of alloys: chrome, brass, alloys that imitate gold or silver.

V Lately appeared design views roof rails - covered with leather Or glass with lighting. I must say that leather-covered roof rails are completely impractical and non-functional and in to a greater extent suitable for creating pictures for interior magazines than for real work kitchens where food is prepared.

At what height to hang

The choice of the height at which to install the railing is selected based on the height of the one who works in the kitchen most often. Usually, standard height installation - at eye level. Before installation, you need to roughly determine this distance and make marks on the wall.

Installation rules

Installing the railing is quite simple - and it doesn't matter which type the choice fell on. The fastening rules are almost always the same. So how to do it:

make marks on the wall at the points of fastening of the fasteners - in order to position the railing strictly horizontally, it is better to use a level;
put the holders on the pipe and fix with screws, which should be at the bottom;
drill holes in the wall;
attach the railing with fasteners;
put caps on the edges.

Important: Fasteners are selected depending on the type of wall material in the kitchen. The fastening must be strong - if the length of the roof railing is 100 cm or more, it must be attached to the wall in 3-4 places.

A car is not just a vehicle, but reliable assistant and a workhorse. Everything seems to be fine, but problems arise with overall things and equipment, because the trunk is limited in volume and you simply cannot put a large boat or bicycle there. We have to look for an alternative: the most famous is the trailer. True, you will have to pay a tidy sum for the purchase and registration, and it is not always pleasant to ride a "train". Rails (from the English rail - rail) come to the rescue - structures in the form of pipes with fasteners that are mounted on the roof of a car.

Rails are rarely included in the basic configuration, although modern models the possibility of their installation is provided.

You can attach an additional rack to the rails: in the form of a lattice or a closed sealed box, as well as mount special slats for skis, bicycles, boats and other equipment.

How to choose roof rails for a car?

Be sure to check when buying whether the fasteners are suitable for your car model. Model roof rails can be purchased from dealers and car services, universal ones are less common, and you will have to drill holes for them yourself.
By the type of installation, roof rails are vertical and horizontal with different amounts racks. As a joke, motorists nicknamed them "rails" and "sleepers".
Material - often the slats are made of aluminum, steel, metal alloys or metal-plastic, they perfectly withstand the test of gravity and the effects of atmospheric phenomena.
Product length and pipe diameter.
The shape and color of the roof rails.

Be sure to consider the load carrying capacity of your vehicle: in particular the maximum permissible roof load. If there are extraneous noises while driving, and the car loses its maneuverability, it is advisable to reduce the load.

Installation of roof rails

The easiest and most unpretentious way is to go to the service department, where specialists will fix your design in literally 15 minutes. If you bought a part and want to mount it yourself, instructions are always attached to the rails. Pay attention to the markings: most often, manufacturers cover the places for the roof rails with special plugs - they insert the fasteners into these connectors.

On some models, you have to remove the headliner in order to fix the fasteners inside. The standard rail consists of two holders, a main support tube and plugs. There are wires and connectors for lighting under the headliner, so be extremely careful.

Step-by-step instructions for installing roof rails on a car:

We are looking for plugs on the seats for the roof rails and remove them (turn them in the direction where the arrows point and carefully remove them).
Degrease the holes, clean them from dirt and dust.
Apply silicone sealant to the holes.
If necessary, dismantle the headliner in the passenger compartment.
We install and fix the supporting parts.
We return everything to its place.

If the manufacturer has not provided for holes in the roof, they will have to be drilled independently according to the dimensions of the railing. To prevent the hot shavings from the drill from damaging the paintwork of the car, you can stick masking tape around the future holes. Don't forget about silicone, otherwise water will seep out in rainy or snowy weather.