What to do if batman arkham knight is buggy. Batman: Arkham Knight Won't Start? Black screen? No Russian on Steam? Is it slowing down? Gives an error message? - Problem solving

(abbreviated as BMT) is a utility designed to cure Batman ™: Arkham Knight from the plague that has struck it in the form of lags, increased system requirements, blurry graphics, microfreezes and crashes. With its help, the necessary changes are made to the files BmEngine.ini, GFXSettings.BatmanArkhamKnight.xml and BmSystemSettings.ini, as well as to the NVIDIA game profile, if the system has an appropriate video card installed.

Installation

BMT does not need to be installed, after Batman ™: Arkham Knight has been launched at least once on the computer, the utility will be able to find all the necessary files by itself, all that remains is to make changes to the configuration.
On first launch, the user will be prompted to do backup changeable configuration files.

Monitor settings

Resolution(screen resolution): set depending on the resolution of the monitor, in case of lowering it (for example, when setting 1280 * 720 on a monitor with a passport resolution of 1920 * 1080), the requirements for video memory will also decrease.

Refresh Rate(refresh rate): used when switching to full screen mode, set according to the characteristics of the monitor (most often 60).

Window / Borderless Window / Fullscreen: There are three display modes available in the game. Since in addition to full-screen and windowed, there is also a "frameless windowed mode". When you start it, in fact, the game is turned on in a window that perfectly closes the desktop and does not have a window "frame". This allows you to get the following benefits:

1. Removes tearing effect (when a horizontal bar in the center of the screen divides the image) without using vertical sync.
2. Reduces control delays.
3. Allows you to easily and quickly switch between windows (Alt + Tab).

And also disadvantages:

1. The screen resolution in the game will correspond to that on the desktop, in order to increase or decrease the resolution, you will need to change it directly in operating system.
2. AMD CrossFire and NVIDIA SLI are ineffective in this mode.
3. Video capture programs will not be able to record video passages normally.

If G-Sync or FreeSync technology is used, then Fullscreen mode is recommended, otherwise Borderless Window.

VSYNC(vertical sync): Used in full screen mode to eliminate tearing.

Maximum Framerate (maximum amount frames / sec or FPS): ideally, the game was created for 30FPS and was not even tested at 60FPS, however, this utility solves some of the problems with loading this and performance, which allows you to safely set 60FPS (if you are using a not too weak video card, where it is better to leave thirty).
For 144Hz monitors, the values ​​are 48 and 72!

Framerate smoothing(leveling frames / sec): due to FPS failures, the game is able to artificially speed up and slow down the process, which allows you to achieve greater smoothness, it is recommended to enable.

Smoothed Range: sets the FPS range in which the game will not make changes, so you should not set too significant deviations from the target figure, it is enough to indicate +/- 5% of the required (for 60FPS it is 56-64).

Loading textures

We have come to the most important thing. Batman ™: Arkham Knight is an "Open World" game that has suffered greatly in its struggle to realize a seamless world. To cope with the task, when loading a location, rather weak textures are used, which are replaced with high-quality ones in the process.
For this, the loading operation is used, in which textures are read from hard disk, then loaded into memory, and then deleted as unnecessary to free up space for others.
And the way this algorithm is implemented in Arkham Knight (timing when it is time to load or remove a texture, load priorities) does not stand up to criticism.
The following profiles are available for selection in the utility:

Default- this is the native algorithm, the reason for half of the problems in the game. Unstable and ineffective, never pick it!
Balanced- a balanced option, an average between speed, detail range and stability, recommended.
Slow- in all respects worse than Balanced, but better suited for weak machines (in the case of slow video memory or poor read speed from the disk).
Fast- an aggressive algorithm that bears fruit when installing a game on an SSD or high-speed (10k rpm) HDD.

FadeIn Rate and FadeOut Rate: the Unreal Engine used has functions for the appearance and disappearance of textures, unfortunately, in this case their use only makes it worse, since the benefits are not visible, and the load on the system increases. The FadeIn and FadeOut values ​​set the amount of time it takes for high-resolution textures to transition to low-resolution textures and vice versa.
It is better to set both values ​​to Instant and offload your system from meaningless operations.

Texture quality

The game uses a LOT of textures, most of them are quite "heavy", with their loading, as mentioned above, they lost a lot, so 2Gb of video memory appears at least (although it turned out to run normally on GTX570 with 1.2Gb).

Texture resolution(texture resolution): Low for video cards with less than 3Gb memory, Normal for 4Gb and more (it will go to 3Gb if you have enough RAM), High for 6Gb.
At the same time, the difference between Normal and High textures is imperceptible to the eye, draw your own conclusions.

Filter Type: Sets the level of anisotropic filtering. This technology has long been "free" (changes the performance by 0.5-1 frames per second and no more), it is recommended to choose 4x or higher.

Post-processing

Not the main cause of the game's problems, but worth fixing.
Blur Sample Count- to the value 4.
Shadowmap scale- for resolutions 1080P and below, set to 1.0.

PhysX settings

Disable Hardware PhysX- By default, the game disables the use of hardware physics by Nvidia cards when using only one video card in the system. Removing this setting in most cases guarantees frame gain and stability.

PhysX Leve l: PhysX level is best set to Low, the game will automatically raise this value if there is enough power.

Enable DX10 Features and Enable DX11 Features- performance unknown, but performance improvements are reported.
Enable Crossfire- only for configuration with AMD cards.

Game settings (from the utility)

Level of Detail(detail level) - the range at which higher-quality textures are displayed, which does not affect the need to load them into memory. On any configuration that meets the minimum requirements, you can safely set High.

Shadow quality(quality of shadows) - loads the map well enough, but not every player sees the difference between the levels of shadows. I advise you to check it yourself, if there is no visible difference to the eye, set it to a minimum.

Antialiasing(anti-aliasing) - instead of the normal FXAA or MLAA, the game uses a very capacious blurring filter, unambiguously disable it. If you really need anti-aliasing, it's easier to enable MSAA or similar in the video driver settings.

Interactive Paper Debris(interactive scraps of paper) - can be enabled on Nvidia cards if there are no overall performance issues.

Interactive Smoke(Interactive Smoke) - Can be enabled on Nvidia cards as long as there are no performance issues in Batmobile ™ mode.

Enhanced Rain Effects(rain effects) - does not work without the "miracle anti-overlay", you can leave it alone.

Enhanced Light Shafts(volumetric light) - the second (after loading textures) problem of the game. An option that professionally brings video cores to their knees.
Disable, in this game, the unoptimized volumetric light effect consumes resources 15 times more than its actual usefulness.

Hacks FPS (Framerate Hacks)

Solve bugs with the "teleports" of the Batmobile, if they are not there, then you do not need to touch.

Nvidia Driver Tweaks

It makes changes to the driver settings only in the profile of this game, the rest of the settings will not be affected. I remind you to use a fresh driver (not older than 3-4 months).
AMD cardholders will not be affected by this point.

Maximum Pre-Rendered Frames - 1
VSYNC Mode(vertical sync) - Force Off (if you really need and do not want to use "frameless" windowed mode, then put Force On).
Adaptive VSYNC- use if vertical sync is enabled.
SLI Mode- SLI in the game works "in any way". Install Single GPU, if there is a second video card, then PhysX can be transferred to it in the previous settings.
Powersaving Policy- Adaptive saves energy and video card resource, but given that the loads in this game change suddenly and uncontrollably, you can enable Maximum Performance.
Texture LOD Bias - -1
Allow Negative LOD Bias(negative deviation of UD) - some of the textures and algorithms of this game were created taking into account the use of this option, set Allow.

Long-awaited release took place today Batman: Arkham Knight- the final game in the series Arkham... Despite the fact that the release of the game was postponed several times, and the developers from Rocksteady promised to optimize the game. Users of the PC version of the game faced a number of problems. If you have Batman: Arkham Knight does not start? Gives a black screen? No Russian in the Steam version? Is it slowing down? Gives an error message? - read the solution to all these problems in our article.

To get started, we suggest you take a look at the minimum system requirements for Arkham Knight, which, by the way, were changed by the developers the day before the release. And make sure your computer meets all the parameters.

OS: Windows 7 SP1, Windows 8.1 (x64 only)
CPU: Intel Core i5-750 2.67 GHz or AMD Phenom II X4 965 3.4 GHz;
RAM: 6 GB;
Video card: NVIDIA GeForce GTX 660 (at least 2 GB) | AMD Radeon HD 7950 (3 GB minimum)
DirectX: version 11;
Network connection: would need;
HDD: 45 GB.

Inclusion of the Russian language in the Steam version

Despite the fact that in Batman: Arkham Knight there is no full localization, Russian subtitles of the game were added to the game, but, unfortunately, they do not turn on automatically. If you do not have Russian in the game, then the solution to the problem is below.

• - The first thing to do is turn off Steam.
• - After we look for the file "appmanifest_208650.acf" in the Steam \ steamapps park
• - Opens it in Notepad (we advise you to make a backup copy first)
• - Go to the Language line and change the English parameter to Russian.
• - Then we save and launch the game. Voila, everything works.

Inclusion of the Russian language in the disc version of the game

If you have a disc version of the game, and you also encountered such a problem, we have a solution for the problem.

• - Go to the Batman Arkham Knight \ BMGame \ Config folder
• - There we find the Launcher.ini file
• - Open it with notepad (we advise you to make a backup copy first)
• - In the file we are looking for a section
• - In the parameters default = Int, change Int to RUS (it should look like this: default = RUS).
• - After that we save everything and launch the game, enjoy Russian subtitles.

Batman Arkham: Knight launching black screen

If during the game your screen flickers or a black screen appears, then you need to set the resolution of your desktop windows desktop the one you have in Batman Arkham: Knight.

You can also run the game in windowed mode, for this you need to register "-windowed" without quotation marks in Steam in the game launch settings

Batman: Arkham Knight came out just the other day, and not to say that everything turned out very smoothly. If there are no special problems on consoles, then PC versions Studio Rocksteady spent too little time, banally giving out a buggy product. Most of the user reviews in Steam have negative character precisely because of the poor optimization of the game.

Thanks for the poorly working PC game Batman: arkham night worth a studio Iron galaxy studios which Rocksteady has given porting to outsourcing. Prior to that, the company was engaged in projects such as transfer Destiny on PS3, Borderlands 2 on PS Vita and, most importantly, Batman: arkham origins on a PC, which was also full of bugs at the start. So blame these 12 masters.

We will try to help you with technical problems in Batman: Arkham Knight, but remember that all these tips are temporary, while only a patch from the developers themselves can correct them. By the way, Rocksteady already working hard to fix problems PC-version of the game.

Flickering or black screen in Batman: Arkham Knight

If while playing Batman: Arkham Knight you have a flickering or black screen, then you need to set the desktop resolution to the same as the resolution in the game. Then the black bars should disappear. In addition, if you really want to play, the windowed game mode can help you, for this you need in the parameters Batman: Arkham Knight v Steam register -windowed.

You can also try disabling vertical sync in the settings.

Game crashes during Batman's flight

Unfortunately, so far only checking the cache in Steam.

IMPORTANT

Sometimes, when checking the cache, all game files are deleted, and so far there is no solution to this problem. You will have to re-upload the game files.

Characters are not displayed in detective mode

If in detective mode your characters are not displayed, just remove motion blur in the graphics settings. This will reduce the load on the graphics card and you will be able to see the characters.

SLI does not work in Batman: Arkham Knight

Option one: update your drivers Nvidia before latest version which were made specially for Batman: Arkham Knight.

Second option: open the BmSystemSettings.ini file in the game folder and change the bEnableCrossfire value from False to True.

The game lags on AMD or Nvidia graphics cards

For AMD: enable the game in windowed mode and disable tessellation in the Catalyst control panel.

For Nvidia: set PhysX settings on GPU in control panel Nvidia.

How to disable Batman: Arkham Knight intro video

Go to the game folder in the BMGame \ Movies category and find two files there: StartupMovie.swf and StartupMovieNV.swf. Rename them as you like, this will disable the movie.

How do I remove the frame rate cap in Batman: Arkham Knight?

Find the UserSystemSettings.ini file in the game folder and change the MaxFPS value from 30 to 60 in it.

Also, try disabling Motion Blur on the same file, it will increase performance and solve almost all fps problems. To avoid crashes, set the following parameters:

• AllowRadialBlur = False
• MotionBlurSkinning = 0
• MobilePostProcessBlurAmount = 0.0

The post will be updated.

We live in Yandex.Zen, try it. There is a Telegram channel. Subscribe, we will be pleased, and it is convenient for you 👍 Meow! The long-awaited release of Batman: Arkham Knight from Rocksteady Studios and Warner Bros. But unfortunately the PC version of the game was released in “not in the best possible way". Many users faced a number of problems when launching and the game itself. We tried to collect the most frequent mistakes and ways to solve them.

As usual, we advise you to update the drivers for your video card (Nvidia has released special drivers for the game) and install the latest version before starting to solve certain problems. And also get acquainted with the official and evaluate the capabilities of your PC.

Batman: Arkham Knight Technical Issues List and Solutions

Flickering or black screen in Batman Arkham: Knight

If your screen flickers, black bars, or just a black screen while playing, set your Windows desktop resolution to the same in the game. Launching the game in windowed mode will also help, for this in Steam, in the settings for launching the game, write the parameter: "-windowed" (without quotes).

Batman Arkham: Knight freezes, crashes or black (pink) screen

If you have updated your Nvidia or AMD drivers to the latest version and this problem appears. You will need to roll back the driver versions to the previous one. You can download them on the website of the video card manufacturer.

How to remove the frame rate cap in Batman Arkham: Knight

Go to the game folder and find the file: "UserSystemSettings.ini". Open with any text editor such as Notepad. Go to the MaxFPS line and change the value 30 to whatever you want, for example 60.

Batman Arkham: Knight is terribly slow on AMD graphics cards

Update the drivers to the latest version, including the beta driver. If that doesn't work, start the game in windowed mode and disable tessellation in the Catalyst control panel.

Batman Arkham: Knight is terribly slow on Nvidia graphics cards

Update your drivers to the latest version and go to your Nvidia control panel. Set PhysX settings to GPU.

Batman Arkham: Knight crashes during Batman flight

If the game only crashes while flying over a city, exit the game and run a full cache check on Steam. If that doesn't help, wait for the patch.

Batman Arkham: Knight - SLI issue

Until the patch is released, run the game on only one map.

Batman Arkham: Knight crashes after disabling motion blur

If you manually disabled the Motionblur option in the .ini file of the game, it will most likely cause bugs in the game. Solution - also disable the DepthOfField option to set the value to "false".

Detective mode in Batman Arkham: Knight does not work correctly

If you followed the above steps with the .ini file, then the detective mode will not work correctly in some cases. You will have to return the values ​​of the fields Motion Blur and Depth of Field to "true".

Controller issues in Batman Arkham: Knight

Disconnect the mouse from the computer and connect the controller. After check the operation, after successful check, the mouse can be reconnected.

Batman Arkham: Knight Files Removed When Checking Game Cache

Fortunately, this is not a common mistake, but it does occur. Checking the cache deletes the game files. If you have good internet connection, then a subsequent check will be able to re-download them. If your Internet connection is weak, it is better to wait for the patch.

How to turn off startup videos in Batman Arkham: Knight

If you are tired of viewing start-up screensavers, go to the game folder. Then go to the address: "BMGame \ Movies" there you will see two files StartupMovie.swf and StartupMovieNV.swf Just rename them.

How do I enable Russian in Batman: Arkham Knight?

For more information on how to enable Russian subtitles in Batman: Arkham Knight, see

Indeed, the way out Batman games Arkham Knight on PC can be compared to the release of AC: Unity. It seems that the game was not tested at all and decided to release it for show. Of course, it was not worth doing this, but that is what it is, and while the developers, hopefully, are working on the patch, we will try to solve the problems ourselves. Go!

Batman Arkham Knight black screen
Quite a common problem for many games. You can solve it by updating the drivers for the video card, setting the native resolution of the desktop, and also try to start the game in windowed mode by adding “-windowed” to the launch parameters

Batman Arkham Knight How To Remove Frame Rate Limits
Another topic under discussion last year- fps limit. Many games are locked at 30 frames in recent times, but it is possible to remove this limit if you have a powerful PC. To do this, find the UserSystemSettings.ini file in the game folder and change the MaxFPS value in it from 30 to 60 or 120.

Batman Arkham Knight How To Skip Introductory Cutscenes
When you watch these videos for the first time, they still do not get bored, but then they start to be wildly annoying. Luckily there is a solution:
Rename or delete the StartupMovie.swf and StartupMovieNV.swf files in the BMGameMovies game folder

Batman Arkham Knight crashes
Check the cache of the game in Steam, many files were broken when downloading, which led to crashes. Also try running the game as administrator and turning off your antivirus.
Make sure the graphics card or processor is not overheating.

Batman Arkham Knight not recognizing controller
In this case, try disconnecting the mouse and leaving only the controller while playing. If the controller is still recognized, you can plug the mouse back in.

Batman Arkham Knight bug, problems with objects in detective mode
Try changing the Motin Blur and Depth of Field values ​​from false to true in the UserSystemSettings.ini file.

Batman Arkham Knight slows down very much, lags, how to increase fps
What to do in this case:
1.First, it's natural, update the drivers for the video card
2.Increase the priority for the game in the task manager
3.Disable antivirus and all unnecessary software while playing.
4.In the folder with the game, find the file BmSystemSettings.ini - BMGameConfig and in this file
-change bAllowD3D9MSAA = False to bAllowD3D9MSAA = True
-change AllowD3D10 = False to AllowD3D10 = True
-Bloom to Bloom = False
-Reflections to Reflections = False
-MotionBlur = False and MotionBlurSkinning = 0
For many players, changing any settings related to MotionBlur causes crashes in the game. If you are one of those lucky ones, then try changing the following settings:
-AllowRadialBlur = False
-MotionBlurSkinning = 0
-MobilePostProcessBlurAmount = 0.0
5.Try launching the game using GameBooster or GamePrelauncher

Batman Arkham Knight error 0xc000007b
This problem has already been discussed on the site more than once. It is enough, for example, to look into this topic.

Batman Arkham Knight save save, return save
Read carefully and do everything slowly:
1.Saves for the game are stored in the cloud, but before sending to the cloud, the game saves files to My Documents Batman Arkham Knight
If the game progress is reset and you are unable to continue playing, try the following steps.
2. Go to the folder above and find the SaveData-> backup folder there - your save files are located here
3.Now go to the folder with Steamuserdataid profile208650
4.Here you will see the files BAK1Save0x0.sgd
5.Now, from the My Documents folder, copy the file that has the same numbering format (0x0, 0x1, etc.) as the file in the Steam folder and paste it into the 208650 folder, deleting or renaming a similar file before.
6. Rename the copied file and remove the save time from the name.
7. Start the game.
8. Now you know how to restore the save in Batman Arkham Knight and where the game stores them.

Batman Arkham Knight how to enable crossfire / sli problems with this
Actually, everywhere they say that at the start the game has no support for either Sli or Crossfire, and therefore it is better to play on one video card for now, but at the same time, gamers have found the reason.
In the BmSystemSettings.ini file, change bEnableCrossfire = False from false to true and you will be happy.
Although still wait for the patch, you never know.

Batman Arkham Knight how to enable Russian
The game really has Russian, but due to problems at the start, many did not notice this. How to activate it:
1.Find the file appmanifest_208650.acf in the steam folder, make a backup just in case
2.Open the file with notepad
3.Change the Language English parameter to Russian

Second way:
1.Find the BMGameConfig folder
2.Open the Launcher.ini file and find the section there
3.In the line default = Int, change Int to RUS (default = RUS)
4. Save and run the game.

This concludes our answer for now. If you still have any problems and nothing helps - write, we will somehow solve them. Until then, good luck and see you soon!