A do-it-yourself soldering iron stand is a sign of good work style. Homemade soldering iron stand with built-in power regulator DIY soldering stand

The topic of soldering iron stands is pretty well covered on our website. How is my stand different from others? - I tried to make it as compact, convenient and functional as possible. Do you want the same? - Please, under the cut!

The main feature of this stand is the built-in regulator. was inconvenient in that he was constantly lost and mixed with another pile-small on the table. This one is tightly screwed to the stand, will never get lost and will not bounce around the table.

The new one is better than the old one in that it has smooth adjustment and operation indication. Here is the diagram, according to which I assembled the regulator:

A diode bridge is any bridge that can withstand the mains voltage and the current consumed by the soldering iron. (formula for calculating current - Soldering iron power / Mains voltage) A suitable diode assembly or bridge can be pulled out of the input circuit of the computer PSU. Instead of a diode bridge, a diode can be used, then the adjustment range will be from 50 to 100%.

Fuse F1 is desirable, but not necessary.

Switch S1, S2 - Bipolar toggle switch with middle position. In the middle position, the soldering iron is turned off and the HL1 LED will not light up. In the position indicated in the diagram, the power of the soldering iron is regulated by the trimmer R3, in the opposite position of the toggle switch, the current flows to the load directly, bypassing the regulator.

I did all these troubles personally for myself, and it is not necessary to repeat this scheme exactly. Yes, a suitable scheme can be gleaned from there.

Regulator board:

To cover the guts of the regulator from external influences made a plastic case, bent the edges with a technical hair dryer:

WITH electronic stuffing we figured out the regulator, now we turn to creating the nodes of the stand itself.

In order not to lose various little things and store solders, I made a small box of tin, the corners of which for strength:

Directly the stop for the soldering iron is, in my opinion, the most successful design. In order for the soldering iron to hold well in such a stop, when inserting its centerline must be below the stop horns.

When soldering, a device is often needed, but you don't always need to clutter the table with such devices - just attach a crocodile clip to the stand, which is fixed with a screw:

To clean the soldering iron tip, I use a metal dishwashing sponge, which will be located in a box made under it with edges:

Stand base - Rectangular chipboard cabinet:

Milled rosin well:

I crumbled rosin from a jar into the recess and warmed it up with a construction hairdryer so that it would not spill out:

We begin to attach the above nodes to the base, further commenting is unnecessary:

Securing the main nodes is complete.

To prevent the stand from rolling on the table, I glued rubber rounds to the back side:

Well, so that everything would be Feng Shui, we glue the identification badges on the regulator body:

Greetings, Samodelkins!

For this we need the following tools and materials:
1. Scraps of laminate remaining after repair
2. A small piece of 16mm chipboard board
3. Clamp for polypropylene pipes
4. Electric jigsaw
5. Wood glue
6. Spray paint. The author used black, but then, in some way, regretted that he had chosen such a gloomy dark color... Therefore, it is advised to choose a more fun color.
7. Putty
8. Sandpaper
9. Usb lamp from fix-price store
10.2 clips crocodile
11. A pair of small bolts and nuts for them
12. Copper wire

The author begins work on a homemade product. First, you need to decide what you are going to store in your homemade product. To determine the size of the future product, it compactly folds up what will be stored in the near future. homemade organizer.

At this stage, he also notes approximate dimensions future product.
Now, but more precisely, he makes a drawing of the workpiece. When making a drawing, it is also necessary to take into account the thickness of the materials used.

Now the author proceeds directly to the manufacture of the organizer. To begin with, he cuts laminate and chipboard to size. Super precision is not needed here, but still try to cut as close to 90 degrees as possible. This is the box you should get.

Next, you need to mark what size the supports for the soldering iron holder should be. The indentations should naturally be higher than the walls of the box, and the supports themselves should be of such length that, when lying down, they can easily fit in the box, and in one layer. Now you need to cut a recess for both metal parts. The author does it like this:

After some time, he realizes that this could have been done much easier with a wood crown, and only then cut in half. Well, as they say, a good idea comes to someone else or to ourselves, but with a delay.
Here's what happened in the end. It remains to tighten a couple of screws and you're done.

Now he starts assembling the box itself. Starts from the bottom. He makes small indentations in advance for the caps of the screws. Then, in the places of gluing, using sandpaper, removes the entire glossy layer of the laminate. Next - gluing. The author takes a special glue for wood products and glues the wide side walls made of chipboard. When gluing, it is advisable to use clamps. After the glue has dried, it is necessary to fix the entire structure from below with self-tapping screws. Next, check the perpendicularity of the walls. You need to measure the angle between the walls. It should be straight - 90 °.

Everything is fine, let's move on. Now this structure has rigidity, so you can glue and screw on the screws at the same time. Here's what happened.

The author made the lid of the box for a thorn-groove connection. It is long and dreary. The author adjusted everything by hand so that it would fit tightly enough into one whole. Then he glues all the details. This will be quite enough, since practically no loads are expected on this part of the organizer.

Then you need sandpaper. It is necessary with its help to sand all possible irregularities and apply putty on the wood. The putty is mainly needed to close the shavings on the ends of the chipboard, well, to hide any jambs that were formed during the manufacture. After the putty hardens, it must be cleaned. The same sandpaper will come to the rescue.

The next stage is painting.

It is necessary to paint the box to give it a presentation.
Well, the paint is completely dry and here the author would like to add one point. It was necessary to choose a more cheerful color so that loved ones would not have a desire to take the box and bury, for example, a hamster in it. Anyway.

Now you can carefully separate the tape from the stand where the hot part of the soldering iron will be. We don't need the smell of burnt paint. If there are sticky marks from the tape, you can try to remove them. Or leave it as it is. After turning on the soldering iron, the adhesive remaining on the stand from the scotch tape should burn out.

And on the part where the handle will be, we put on our own elastic band from fasteners for polypropylene water pipe to prevent the soldering iron from sliding on the stand.

The very fixing of the soldering iron stand will be very simple. Nuts are glued into the racks and all this is pulled together by bolts with caps to the wall of the box. Here's what happened in the end:

Everything is very simple and practical. If you wish, you can drill several more of the same holes and, if you have more than one soldering iron, then this design feature will be very useful. It will be possible to rearrange the rack under different sizes soldering iron. Now, in the side wall of the box, the author decided to make a pair of clamps. They will be used as a third hand for soldering. To make such a structure, you will need such a miracle of Chinese engineering from the fix-price store.

In the store, it is marketed as a usb lamp for backlighting a laptop keyboard. It can also be used in conjunction with a power bank, or as a night light. As the latter, it suits better, since, to be honest, it shines so-so, but its flexible leg will be useful to us. You will also need a couple of small screws with slotted nuts.

It is necessary to disassemble this miracle lamp. In principle, he does not mind at all, and himself falls apart, thereby providing a kind of assistance in disassembly.

In the process of working with a soldering iron, a special stand is required. The soldering iron cannot be simply left on a table or some other surface. In this capacity, as a rule, any object suitable in the house is used. If you try a little, you can make a soldering iron stand yourself. Such a device will be cheaper and will be adapted to the needs of the master.

How to make a do-it-yourself soldering iron stand? To make it, first of all, it is necessary to make a stable base from a material that does not conduct heat well. To work, you need the following tools and materials:

A rectangular workpiece is cut out of a chipboard sheet, the sides are polished with sandpaper, rounding the corners. Next, four rubber legs are made, which can be cut from a piece of rubber or a cork from chemical test tubes. The legs are screwed to the base with self-tapping screws.

A hook is bent from a long strip of iron with pliers, which serves to install the heating part of the soldering iron. From one edge of the stand, an iron strip with a hook is fixed with bolts. To securely fix the structural elements, you need to pre-drill holes in the chipboard blank.

Soldering iron pen holder can be made from any part with a suitable recess ... It is bolted to the edge of the music stand... Closer to heating element install the solder holder in the same way. To do this, use a metal plate from old radio components or other consumable material.

At the place of soldering, you can melt a piece of tin, which is heated during operation. Thus, a convenient and universal device... Rubber feet give the structure stability and prevent damage to the table surface.

The simplest fixture can be made from thick wire. It is a cone spring that is attached to a stable base. A piece of wire, approximately 30 cm long, is wound onto the tool. An eyelet is made at the end for attaching to the stand. For the spring, you can use a thin clothes hanger.

The base is collected from any suitable item - a tin can, unnecessary detail from household appliances or a piece of plywood, etc. A hole is pre-drilled in the workpiece, where a spring is attached with a bolt.

In another version of the design, rectangular holders with recesses for a soldering iron are made from wire using pliers. They are fixed on both sides to the base made of chipboard or wooden block... The soldering station can be equipped with containers for tin or rosin, storage box small parts, which is glued with special glue.

Soldering iron stand with magnifying glass. To make it easier to work with small parts, a special stand with a flexible holder ("third hand") is installed on the stand. It can be used to fix various equipment: a magnifying glass, a backlight lamp and other tools. The holder is fixed with hinges, which allows the device to be rotated in different directions. All parts of the holder are made of metal elements to ensure the stability of the structure.

To work, you need a cover from a computer power supply and the following tools:

• scissors for metal;
• ruler or vernier caliper;
• file or sandpaper;
• marker.

We mark it with a marker approximate dimensions workpieces for parts from a computer (width 60 mm, height 35 mm). A stand is cut out according to the marks applied, then grooves are made on the sides, where the tool is installed. For safe work, sharp edges of the product are processed with a file or sandpaper. Thus, a homemade soldering iron stand can be made in 15 minutes.

A computer's power supply can turn into a mobile device. Such a device is a box or case, inside which there are compartments for soldering, rosin, a clip for circuits and other small parts. The wire holder attaches from the outside and folds easily over the top of the pencil case.

The product is simple to manufacture and does not require special materials. For the holders, fuse jaws are used, which are attached to a base made of a wooden block or PCB. The distance between the holders is set in accordance with the size of the soldering tool. The fuses are screwed into pre-drilled holes with self-tapping screws.

If you urgently need a soldering iron, you can quickly make a stand out of screws or nails. V wooden base nails are driven in crosswise. This design is quite stable and holds the tool well.

You don't need any special knowledge or skills to make a homemade soldering iron stand. For work, materials at hand are often used, which can be found in any home. Hand-made devices are simple and easy to use.

Many of us work with radio components, some professionally, some at the level of a radio amateur, but this is not important, since soldering something is interesting and fascinating process, and everyone has a soldering iron for this, and, of course, what kind of stand, whether it's a simple lid twisted from a can, or bought in a store already finished structure, nevertheless, all these devices simplify our work, the more convenient it is done, the easier it is to work. For these purposes, it was decided to make something universal, a good helper with good functionality, and at the same time use material and mechanisms common in everyday life, which, if desired, will not be difficult to find. And now I will tell you how to do it.

Initially, I wanted to do something simple, namely a holder for a soldering iron with a temperature controller, since the soldering iron was overheating, but when it started, it could not stop. Everything necessary fixtures I did it gradually, and therefore new and new ideas arose every time.

So, we need:

Material:

Chipboard board;

Bolts of different diameters;

Screws, self-tapping screws;

Wing Nut (10 pcs.);

Crocodiles (3 pcs.);

Door hinge (1 pc.);

Unnecessary flashlight;

3 motors (2 from the printer, 1 loose from the machine);

4 LEDs (3.5 volts);

5 switches;

Collet;

Small sharpening attachment (from the set for the engraver);

Helium paste (adapter for the nozzle);

Wires;

Soldering iron;

3 corrugated pipes (from a gas lighter);

Cigarette case;

Tin coil;

Socket;

Doorhandle;

4 meters of cable;

2 power supplies (from a 5 volt phone charger and a 9 volt router);

Self-adhesive film, edge;

Black paint;

Tool:

Soldering iron;

Glue gun;

Chisel;

Metal scissors.

So, let's begin

We take a chipboard board, mark it out and cut it out in an L-shaped shape, the dimensions are attached.

At a specially selected place we mark and cut out holes for pushbutton switches (4 pcs.).

In order to conveniently place our devices, and they knew how to be regulated, double L-shaped levers, cut from sheet metal, were made for each individually.

The cheapest soldering iron stand was purchased.

And now we are going to refine it!
It was decided to make 2 crocodile holders, for this we drill 2 holes on the sides, take steel wire, and push through the bottom.

Next, we bring the ends to the top, level them with each other, bend them so that they look solid? we take 2 corrugated tubes taken from a gas lighter, put on a wire, and then we attach a crocodile on each side, as well as drill a hole in the saucer, in order to screw it tightly to the surface of the board, as a result we get.

We make the third vertical crocodile, bend it this way.

It attaches to the bottom of the stand.

It was decided to make a mini drill, as well as a sharpener for small parts. For this, 2 unnecessary motors were taken from the printer.

A sharpening attachment was attached to the motor using an adapter from a helium pen. The motor itself was attached to the found metal mold, in this way so that he can stand upright.

In order to be able to work at night, we make lighting from an unnecessary flashlight, in my case of this type.

We remove the unnecessary, and leave only the part with the LED.

In order for the lantern to move up and down, an adapter (cover) was taken, drilled through hole, a long bolt is inserted, the holders are cut out, and everything is clamped with a wing nut, thus.

Sometimes you have to work in hot weather, so I wanted to add such a nice little thing as a fan. We take the most common motor and make a case for it. A broken charger from nokia fit optimally in size. We cut off the plug, take out the core and cut out a place for the motor.

The wires were soldered, assembled it looks like this.

In order to be able to solder small elements, we take a magnifying glass, remove the excess and make a backlight using 4 LEDs of 5 volts, and fix it with a glue gun.

We fix everything in place and get it.

We put on the switch.

We cut out two plates, bend them in the shape of a slingshot, drill, and thread a long bolt, this is how it all looks.

We attach to the body of our mini drill, in this way.

In order for the stand to be used anywhere, we add 4 meters of cable and the usual doorknob to rewind it.

We drill 2 holes for the plug.

We drill 4 holes for fastening, we make partitions.

We add up everything you need.

We make the main holder for the soldering iron, pen and tip.

Cut out 2 plates, bend, attach to door hinge, and from below to the board itself.

The door hinge is needed so that when unwinding the cable, we can remove the soldering iron to the side, and it does not interfere with us.

Since the soldering iron was very overheating, and it was almost impossible to solder at the same time, it was decided to make a temperature regulator, having looked at the diagrams, etc., I decided that it would be easier to buy an inexpensive dimmer (dimmer) of this type.

Having disassembled it, and having cut out a place for the board in the board, brought 2 wires to the bottom, left one half of the case, and drilled a hole in the middle for the regulator wheel.

Fixed to the board with 2 screws.

I will lay out the connection diagram below.

In order to be able to work in one place, as well as for convenience, we put an outlet, which makes it possible to connect glue gun, phone charging, etc. things.

We make such a stand where you can put a jar of flux, or something else. Carved from an old watch case.

When all the fixtures are ready and painted black, glue the self-adhesive tape to the surface of the board. Was chosen light color, since on such a surface all the details are clearly distinguishable, the side faces are pasted over with an edge.

A do-it-yourself soldering iron stand is a very convenient and practical fixture, which is a kind of table and performs protective function... Before soldering, the soldering iron must be warmed up. When warming up, the case heats up very much, which is why it is worth using a stand to protect any objects.

The design of the stand for the soldering iron: 1 - base, 2, 4, 5 - contacts from a relay of the MKU-48 type for 220 V, 3.10 - support stands, 6 - disc, 7 - spring, 8, rod of movable contact Kp 9 - square , D1 - diode of D7Zh type.

The need for a stand for a soldering iron

A high-quality and practical soldering iron stand is needed by all those who deal with soldering. You can make it yourself from scrap materials, you just need to have certain skills and certain tools. Homemade soldering iron stand is quite easy to manufacture and operate. For a thing to be convenient, it must have certain slots designed for containers with flux and alcohol, boxes for rosin and dispensing, as well as a place for removing some parts. A homemade soldering iron stand can be used with a tool of any power. When making a structure, it is necessary to place all containers in such a way that it is convenient to solder.

Back to the table of contents

How to make a soldering iron stand?

Factory options are very inconvenient and small, so many are wondering: how to make a stand yourself so that it is practical? Manufacturing must begin with the choice of materials. Need to have:

• duralumin sheets with a thickness of about 1.5 mm;
• a small wooden plate 50x40 mm in size, made of oak or beech;
• two small metal boxes with lids;
• bottles of varnish, preferably the same and with brushes.

When everything is ready, you can start making. In duralumin plates, it is necessary to make holes for bottles with flux, alcohol in such a way that they are inserted freely enough. The holes for the jars must be made so that they fit very tightly. After all the holes are ready, you need to bend the base slightly so that you can make a support.

If you wish, you can make special stands so that the stand is a little higher and you can work more conveniently. All parts must be carefully filed, and then sandpaper, so that you can round off the edges and all corners.

When everything is ready, you can start assembling. The lower container support must be screwed to the upper support and wooden platform... By using epoxy resin you need to glue the jars and bottles into the base. Alternatively, you can take a small rectangular jar and place it between the stands on which you can place the appliance. In such a jar, it is very convenient to store various devices that are simply necessary during soldering.

You can make a stand for a soldering iron from a regular tin can. To make it you will need:

The soldering iron stand can be made with a nail or drill in the bottom of the can, making a small hole for the bolt.

• wire hanger;
• washer;
• bolt with nut;
• marker;
• tin.

The wire taken from the hanger is very convenient for this type of product, because it has good strength, but at the same time it is a little springy.

For manufacturing, you must initially bite off the wire with pliers on both sides and align well. You need to support the wire with one hand and wind it around the marker with the other. You need to make a small eyelet on the resulting spring with pliers.

Make a small hole in the bottom of the can with a drill or nail. After that, you need to assemble the entire structure. It is necessary to insert the spring into the prepared tin can and tighten with the bolt, nut and washer. In such a simple way, you can make a very convenient and practical stand for a soldering iron.

Back to the table of contents

How to make a smart soldering iron stand?

You can not only make an ordinary stand for a soldering iron, but also make a "smart" model that will independently adjust the heating level of the device. When working, a smart stand for a soldering iron must be plugged into the network, and it will regulate the heating level of the device, thereby protecting it from overheating. Thus, there will be no overheating, but always ready to work. To make a stand for a soldering iron, you need to take materials such as:

The finished structure is assembled by tightening the spring inserted into the box using a bolt, washer and nut.

• double socket for outdoor installation;
• a piece of single-core wire, preferably copper;
• plywood;
• transformer;
• connector for fixing parts on a plane;
• LEDs;
• resistor;
• switch;
• wires;
• pin.

After all the materials are prepared for work, you can proceed to the direct assembly. First of all, you need to decide on the size of the base itself and cut it out of durable material.

After that, you need to make an outlet, for which it is worth drilling holes for the outlet socket, installing LEDs and a switch.

Then install everything in its place and solder the necessary wiring to each other.

From the outlet through the switch, you need to remove the wires for the subsequent connection of the transformer, then you need to remove the wires through the socket of the outlet and attach a resistor, a red LED, which will signal that the transformer is on. All this must be carefully fixed on the base. In addition to making a stand, it is necessary to make a holder for the heating device. To make it, it is necessary to fold the wire, preferably copper, in half and attach it to the base. It is worth taking care of special boxes in which the rosin and solder will be stored. The boxes should also be screwed to the base.

All bare wires should be wrapped with insulating tape and we can assume that the soldering iron stand is ready. You can get to work and be sure that heating device will work perfectly without overheating at all.