Interroom doors in the interior of a modern home. About the benefits of high doors and the rejection of stereotypical thinking Ways to open interior doors
In the market of goods for interior design, you can find a variety of models interior doors. They can differ from each other not only in cost and material, but also in height. Habitual are such products, whose length does not reach the ceiling by an average of thirty centimeters. However, there are interior doors, whose length reaches three and a half meters. Such models are called high.
Peculiarities
Interior doors to the ceiling, or Italian, are considered to be a highlight modern design interior. If you need to give the room the effect of spaciousness, it is worth giving preference to doors to the ceiling. High interior doors are an original interior detail that cannot but attract attention.
Design
The unusual appearance of the door to the ceiling suggests its special design. They are mounted with special hidden loops which cannot be seen when the product is in the closed position. Installation of a high door is carried out without the use of platbands. The ceiling-length structure is installed in a box made of aluminum.
A high interior door can have both a visible and a hidden box, so the buyer has the opportunity to choose the most suitable option for your home. The effect of a door built into the wall is created by painting the box in a single color scheme with a wall.
For residential premises, high sliding products are most often used. They not only look stylish, but are also quite compact. To carry out the installation of high sliding design, it is necessary to make a special niche in the ceiling for its guides.
Varieties
High products are sold in a wide variety of variations, among which are:
- glazed (window effect);
- veneered;
- deaf;
- made from solid wood.
The most expensive are high doors made from solid wood. The raw materials that are used to make the structure are thoroughly dried, with a duration of several years. A model made from solid wood is affordable for few. However, this is not a reason to deny yourself innovative products, because many companies are ready to offer consumers doors made of glued solid wood. The structures have their undeniable advantages, among which are:
- resistance to fluctuations in the humidity regime in the room;
- resistance to deformation;
- maintaining the integrity of the product throughout the entire period of operation.
Glazed high doors look especially stylish and elegant. They are widely used in the interior of not only residential premises, but also in offices, hotels, restaurants and other places that are considered public. However, special requirements are imposed on glass models that are installed in houses and apartments. Structures should be as durable and environmentally friendly as possible. The photo shows the most attractive models of high glass doors.
Veneered structures are made from solid pine, which is soft and flexible. To give the product strength, manufacturers cover it with oak veneer and a thick layer of varnish. Calvados, walnut and makore veneers can also be used.
Deaf high doors are smooth and paneled. The first are made from synthetic materials allowing you to achieve a huge variety of colors and textures. Finishing can imitate different breeds wood and stone. A smooth canvas is often used for interiors in the style of minimalism. Paneled doors are rightfully considered the most attractive. Their popular models are shown in the photo.
Advantages and disadvantages
If we evaluate the number of positive reviews about high doors, then we can no doubt talk about their advantages. Among these are:
- visual increase in the area and height of the room;
- a wide choice of styles and shades;
- resistance to deformation;
- original appearance;
- high quality raw materials used for the manufacture of door structures.
The only drawback of ceiling models is their high cost. However, the high cost is justified by the durability and excellent appearance. The video shows examples of residential interiors in which such doors were installed.
When purchasing high doors, it is necessary to give preference to manufacturers with impeccable reputation. In this case, the buyer will be sure of the quality of the goods.
The unique design of stylish high doors of the Helder series can become a real surprise for the consumer. In this series, our designers managed to combine equanimity and coldness with a bright and unique character. And this is especially interesting in view of the fact that the series presents models in cold colors.
The overall design that distinguishes Helder high wooden interior doors seems simple and at the same time ambiguous and active. The canvas of the product looks cut into pieces. In this case, the division is located asymmetrically, which adds general image liveliness.
It seems that the canvas consisting of paneled rectangles at the high interior door is filled with a special charm. At the same time, the "cuts" that formed overall design of this series, did not remain wide and empty. Inside the cruciform cavity, slats are located exactly in the middle of each line. The width of these rails is exactly 1/3 of the width of the opening, and in height they exactly match the height of the protrusion of the panels.
The inherent accuracy of all calculations allows us to create unique solutions. A clear analysis and selection of all parameters, drawing up a design based on classical calculation formulas, modern equipment and responsibility in work each time lead to the creation of unique high wooden doors able to decorate any room.
Hardware used in tall wooden doors
Modern doors of the Helder line are made in just three color variations: black, gray and white. And the sophistication of this choice is emphasized by the fittings used in these products.
Slightly below the middle door leaf handle and lock are a discreet and elegant composition. The chrome-plated finish, slight bend of the handle and comfortable shape allowed it to become not only a decoration of a high interior door, but also a practical element that provides ease of use.
Known issue - small apartments. Good decision- sliding doors - not always suitable: sometimes there is so little space that all the walls are lined with furniture and there is nowhere to move the canvas. But if the partition is not load-bearing and can be partially dismantled, then there is still an option: sliding doors sliding into the wall.
Structurally, the built-in interior doors do not differ from the coupe, they are based on the same components: a leaf (one or two), guide rails, carriages with rollers and fittings. If desired, an electric drive. The only difference is that when you open the canvas is hidden from the eyes. In the converted section of the wall there is a cassette into which a door slides on rollers.
The canvas itself can be anything: wood, glass, plastic. You can choose an option that will be in perfect harmony with the rest of the doors and the interior as a whole. The roller mechanism also does not differ from the standard one.
The difference is in fittings: locks and handles should not interfere with the displacement of the canvas into the wall. With handles and locks you need to decide in advance. If the sliding door into the wall will go completely, a lock with a button will be required to close.
The second difference is that sliding doors that slide into the wall require a greater energy intensity of installation than a compartment. It is necessary to dismantle part of the wall, fix the cassette, sheathe the structure with plasterboard and complete the repair with a finishing touch. There will be many construction debris, you need to prepare for this in advance.
It is better to buy built-in doors in the wall immediately complete with a cassette. Buying a cassette later and installing it separately will turn out to be too expensive and energy-intensive. The pencil case door kit already has everything you need - a canvas, mechanism, fittings and a cassette.
Attention: for partitions made of brick and drywall, pencil cases are different. This must be specified at the time of purchase.
Installation sequence
1. Check the verticality of the walls and carefully calculate the opening (two widths of the canvas).
2. Dismantle the required area, if possible without unnecessary damage.
3. Process the opening, repair cracks.
4. Install the pencil case and secure with the help of mortgages. The upper mortgages will serve as a reliable fixation of the canvas, preventing displacement of the structure.
5. Sew up the cassette with drywall: the upper edge is placed along the enclosing box.
6. Install built-in doors and fittings.
7. Produce finishing walls.
8. Install platbands.
Sliding doors sliding into the wall a good option save space occupied ordinary door, but they take away 10 centimeters of the thickness of the room at the expense of the cassette. That's why perfect option for their installation - to mount built-in doors instead of self-supporting walls.
