Why can't the laptop find the wifi network. Why WiFi does not work on a laptop, and how to fix it

Owners of laptop computers are often faced with the fact that the laptop does not see the WiFi router. This is a rather serious and annoying problem that baffles many, even experienced users. What can cause the laptop to not see the WiFi router?

There may be several reasons for this phenomenon, and each of them requires separate careful consideration. This problem can affect not only users of portable machines, such as laptops and netbooks, but also owners of classic stationary systems with a WiFi receiver. Therefore, the solution to such a popular problem will be relevant and useful to know almost everyone who at least sometimes deals with computers or WiFi.

Connection problems - looking for the culprit

One of the most common obstacles to preventing a laptop from seeing a WiFi router is a failed WiFi module launching on it. It may even happen that the search for available networks is turned on, all points are within range, but if you just try to join, the system gives a connection error. These and similar complications most often occur on computers with Windows 7, namely this system most likely to create problems with WiFi connectivity.

Figure 1. Checking the driver installation on WI-FI. First you need to check if the driver is installed on Wi-Fi.

In addition to the fault of the computer, one should not exclude the possibility of a malfunction of the access point, i.e. router. Therefore, the first step is to determine what exactly triggered the problem, who is the culprit - a computer or a router? A simple and effective way to determine this is as follows:

Find a second computer and try to connect to the access point from it.
From the suspect computer, try to connect to various other points.

Thus, it should be found out which of the devices actually triggered the problem.

If one computer does not see the router, but other computers and mobile devices freely connect to it, then the problem is in this computer. Otherwise, if other devices do not have the ability to connect to the router, and the other access points do not cause any problems, you still have to deal with the router.

Checking the drivers

In the case when WiFi does not connect due to the fault of the computer, the first step is to check whether the WiFi module is running and whether all the drivers are installed on it.

To check the adapter, go to the Network Connections through the Control Panel and enable the adapter.

To this end, open the Device Manager (Computer - Properties - Device Manager), look for and open the "Network adapters" subsection in it.

We check if there is a device with the name “Wireless Network Adapter” in its name, or “Wireless”, or simply “Wi-Fi”. You need to go to "properties" and see if it works fine. (FIG. 1)

If such a device is absent, or does not work correctly, and there are unrecognized devices, you must reinstall their drivers. To do this, we find the website of the manufacturer of the laptop model, look for a suitable Wireless Network Adapter driver on it, download it and install it.

It is common for the system to automatically detect drivers incorrectly or outdated drivers that can prevent the wireless adapter from working correctly.

Checking the adapter

Be sure to check if the wireless adapter is enabled on the laptop. As a rule, it is turned on / off by pressing a key combination, for example FN + F2. To be sure which buttons you need to press, find the key with the wireless icon and press it at the same time as the FN key, or refer to the user manual for this laptop model. Some laptops have a separate switch to turn WiFi on / off.

Another way to check if WiFi is turned on or not is through the network management program. From the Control Panel, go to the Network Control Center, then on the left, select "Change adapter settings". A window for network adapters and connections will open, in which you need to find "Wireless network connection". Right-click on the connection icon. If in the opened context menu there is an item "Enable" and the connection icon looks gray, click on "Enable", the adapter should start.

Otherwise, if the icon is colored and the menu contains the "Disable" item, it is recommended to restart the adapter, ie. click on "Disable", wait a few seconds until the module turns off, and then turn it on again. The connection icon in the notification area should look like in the screenshot. This means that the adapter is turned on and access points are found. If a similar icon appears, but a red cross is shown instead of a yellow asterisk, it means that the module is running, but no connection points were found.

The situation is also quite typical when the computer finds available WiFi points, but does not connect to them, instead, an attempt to connect causes the error "Windows could not connect". But at present, there is no universal and unambiguous fix for this error. Quite often, the cause is incorrect router settings, such as incorrect security and encryption settings, or problems with the allocation of IP addresses.

One of possible ways, which helps out in many situations, is the reboot of the router and the computer. In some cases, clicking the Troubleshoot link in the error message box will help you fix the error. Another tip: go to the properties of the wireless adapter and disable it from being turned off to save energy. the reason may be that the computer does not correctly manage the power supply of the WiFi module.

Quite often, the connection is dropped after the laptop wakes up from hibernation or standby mode. This problem manifests itself mainly on Windows 7 and Windows 8. In this case, the measure described above also helps, i.e. prohibit disconnecting the adapter to save power. To do this, go to the Device Manager, in the network devices subsection we find the wireless adapter, go to its properties through the context menu. In the properties window, you need to go to the "Power Management" tab and there uncheck the "Allow the device to turn off" item. Click OK and reboot the system.

A connection error will inevitably appear if the password and encryption type for automatic connection, and on the router, one or both of these parameters have been changed. In this case, the system will try to connect to the router with the old parameters, and the router, accordingly, will not accept them and refuse the connection. The solution to the problem is to delete the network with the old parameters and connect using the new ones.

Checking the router configuration

You can enter the settings of the router through Network Connections, where we select the item "Network and Sharing Center", then, if necessary, change the settings of the router.

In the same case, when the router is to blame, and the restart does not help, there are several ways that can fix the problem:

Do not use channel autodetection, set it manually, check different channels.
Change the type, frequency and region of the network.
Do not use Cyrillic characters in the password and SSID name.

It's easy to get into the settings of the router, for this you need to do a few simple steps... First of all, the router must be connected to the computer with a network cable. There is an opportunity to join through wireless network, but it is not as reliable and secure as directly via cable. Then open any Internet browser, enter the router's IP into the address bar, usually 192.168.0.1 or 192.168.1.1, more precisely, you can find out in the instructions for the router or read it directly on the sticker on its case. Having entered the address of the router, we get into its web interface.

To gain access, you must enter a username and password, usually they are the same: admin. Sometimes it may differ, this should be indicated in the same place as the address - in the instructions or on a sticker. Once in the settings, you must first try to set them in accordance with modern standards:

WPA / WPA2 security type;
WPA2-PSK version;
automatic encryption;
region of the USA or RF.

https: // site /

It is recommended to change the WiFi hotspot name and password. Don't use Cyrillic, check your keyboard layout! Only names and passwords in the Latin alphabet work correctly, numbers are allowed. After you finish changing the parameters, you should reboot the router. After that, the new parameters will take effect, you can delete the old saved connection on the laptop and all other devices that have connected to the router earlier, and try to connect again.

As already mentioned, if, after changing the password, type of protection or encryption, you do not delete the old one and create a new connection on the computer, the computer may refuse to connect to WiFi, giving an error. To complete this procedure, you need to go to the Network Control Center, you can do this from the Control Panel or through the network icon in the notification area. Going into it, we find and click on the link "Manage wireless networks." Once there, select the network of the router on which the parameters were changed, right-click on it and select "Delete network" in the context menu.

This article will focus on what to do if Window 7 does not connect to a WiFi network. The fact is that although this operating system is more stable than its predecessors, there may still be various errors that must be corrected manually.

Before moving on to connection problems and their solution, you need to understand what WiFi is and how the technology works. This will allow you to quickly fix some problems.

The fact is that an access point is required to connect to such a network. Its functions are usually performed by a wireless router. And therefore, first of all, if there are no available connections to the WiFi network in Windows 7, you should pay attention to the router.

As a rule, the reason is precisely in it. But of course, there are other problems as well. So let's go in order.

Router check

Everything is very simple here. If the laptop does not see available connections, then you should go to the WiFi router settings menu and check if the wireless network is enabled. To do this, you need to connect to the router using a regular Internet cable. After that, open a browser (any) and write 192.168.0.1 in the address bar. Press "Enter". Next, a window will appear in which you will be asked to enter your password and login. As a rule, the default key and login are admin, admin, respectively.

How to easily find out the IP address of a WiFi router: Video

If you changed this data, then enter your values. Next, we find ourselves in the settings menu. We're interested in Network Wireless Settings. In the settings of the wireless network, you need to check the box next to Enable Wireless Router Radio. That's it, this completes the router setup. And if in a laptop with Windows 7 problems with WiFi still remain, then you should proceed to setting up the operating system.

Why does my computer not see available wireless networks?

There can be many reasons for this, as well as solutions. Fortunately, Windows 7 is user-friendly and has many options for diagnosing and fixing problems. But we will only consider the most common ones.

First of all, check the status of the wireless WiFi connections... To do this, you need to open the Network Control Center. To do this, click on the network icon in the tray and select "Network and Sharing Center" in the window that appears.

The menu will start, in which all the settings related to the network are made. Here we are interested in the item "Change adapter parameters". In the window that opens, you need to find a shortcut that has the name "Wireless Network Connection". If this connection is gray, it means that it is disabled. To enable it, you must right-click on it and select the "Enable" item.

Windows 7 Won't Connect to Wi-Fi: Video

The wireless icon is not displayed in the tray

Often users ask the question, what to do if the WiFi icon is not displayed in the tray in Windows 7? This can only mean one thing - the wireless module is turned off or does not work. occurs, as a rule, using the Fn key combination + the adapter power button. On different laptops, this button may be located in different places.

For example, on Asus laptops Is a combination of Fn + F2, on Lenovo - Fn + F5. The WiFi power button itself is indicated by the corresponding image. In addition, on some models a separate key is provided to activate the wireless module. In this case, just click it.

So, after turning on the wireless adapter, Windows 7 should automatically start searching for available networks. If this did not happen, and the icon in the tray did not appear, then you should check the correctness of the drivers.

What to do if a laptop with Windows 7 does not see Wi-Fi: Video

Driver check

Verify software in Windows 7 it is possible in the task manager.

You can start it by clicking on the shortcut "My Computer", which can be found on the desktop, in the start menu or in Windows Explorer, with the right mouse button. In the window that appears, you need to click "Properties". Next, a menu will open in which you need to open the "Device Manager".

In the window that appears, we are interested in network adapters. If you did not find this, then there are no drivers for the device and you need to install a driver for this module. If, nevertheless, there is such an item, then we open it. Typically, the wireless adapter is called the Wireless Network Adapter. Also, the device may be indicated by an exclamation mark. This indicates that the driver is not working properly and needs to be updated or reinstalled.

This is very easy to do. As a rule, a special disc is included with a laptop, which contains all required programs and drivers. If there is no such disc, do not rush to get upset. The necessary software can always be downloaded from the Internet, since the manufacturers have taken care of supporting their customers.

To do this, find the official website of the manufacturer of your laptop and write the exact name of the laptop (exact model) in the search. Next, download the necessary drivers and install them. It should be noted that it is not recommended to install software downloaded from third-party sources, as such drivers may work unstable, and sometimes even pose a threat to the integrity of the system.

How to Reinstall WiFi Driver: Video

It is also important to know that sometimes, even with the driver installed, the adapter cannot be turned on, because additional functions keyboard. This means that along with the software for the network adapter, you should also download the driver for the keyboard, as well as the recommended utility for managing the wireless module.

Quite a common problem for owners of laptops with Windows 7 or Windows 8 (8.1) - in one wonderful moment in the notification area, instead of the usual icon of a wireless Wi-Fi connection, a red cross is displayed, and when you hover over it, a message stating that there is no.

At the same time, in most cases, this happens on a completely working laptop - yesterday, perhaps, you successfully connected to an access point on it at home, and today this is the situation. The reasons for this behavior may be different, but general outline- the operating system thinks that the Wi-Fi adapter is turned off, and therefore reports that there are no available connections. And now about the ways to fix it.

If the wireless network was working and now there are no available connections

If everything worked recently and now you have a problem, try the methods below in order. And if these options have already been tested, go to the seventh point, from which we will begin to describe in detail (because everything is not so simple there for novice computer users).

7. Remove the wireless Wi-Fi adapter from the device manager, reinstall it

To launch the Windows Device Manager, press the Win + R keys on your laptop keyboard and enter the command devmgmt.msc and then press Ok or Enter.

In the device manager, open the "Network adapters" section, right-click on the Wi-Fi adapter, note if there is an "Enable" item (if there is, turn it on and do not do everything else that is described here, the inscription no available connections should disappear) and if it does not exist, select "Delete".

After the device is removed from the system, in the device manager menu select "Action" - "Update hardware configuration". The wireless adapter will be found again, the drivers will be installed on it and, possibly, everything will work.

8. Check if the "WLAN Auto Config" service is enabled in Windows

In order to do this, go to the Windows control panel, select the "Administrative Tools" - "Services" item, find "WLAN Autoconfiguration" in the list of services and, if you see "Disabled" in its parameters, double-click on it and in the field Set the "Startup type" to "Automatic", and also click the "Start" button.

Just in case, go through the list and if you find additional services that have Wi-Fi or Wireless in their name, turn them on too. And then, preferably, restart your computer.

Hopefully, one of these methods will help you solve the problem when Windows says there are no Wi-Fi connections available.

The misunderstanding, which we will touch upon in our article, is increasingly troubling users of laptops connected to a wireless network. This misunderstanding is of a technical nature - the essence of the problem is the unexpected failure of the built-in or external router to receive and transmit data.

In this case, the network icon in the tray takes characteristic appearance- a ladder crossed out with a red cross - and when you hover over this cross, a message appears stating that there are allegedly no available connections in the Windows 7 system. This network behavior is a complete surprise to the user. We will teach you how to deal with this problem, but for now, drawing your attention to the fact that it often appears immediately after reinstalling the operating system. It may very well be that the reason for the network failure is the incorrect installation of drivers or the installation of drivers that are not quite suitable for your adapter model.

In this case, find out the model of your adapter and download the latest drivers for it. To do this, go to the website of the laptop manufacturer - there they will probably be found. Download and install everything that will be offered to you. The fact is that in addition to the drivers necessary to ensure the operation of the network, you may also need drivers to support function keys.

Many laptops use the "Fn" type function keys to control the adapter. If you do not use these keys, then managing the adapter turns into a hassle. The so-called flight mode is also activated by the keys. Without installing the appropriate programs, you lose most of the functionality. No wonder the WiFi module starts to behave strangely.

First attempts to fix the problem

To begin with, you can suggest trying the following actions:

Restarting the router sometimes helps. To reset, simply unplug the power cord and plug it back in.
Call the standard Windows diagnostic tool from the context menu of the connection icon.
Sometimes the hardware WiFi switch on the laptop panel turns off. Check its condition.
For this, you can try to run the service utility supplied by some computer manufacturers along with the drivers.
Go to the "Network Connections" section of the control panel. Check if the wireless icon is active. If not, activate it from the context menu.
Check the drivers again.

These activities are supposed to liven up your grid. However, this may not happen. In this case, follow our further recommendations.

Device Manager - Help

Like any device on a computer, the wireless adapter is registered in a Windows snap-in called Device Manager. You can access the dispatcher in different ways:

Right-click on the My Computer icon. In the context menu, select the "Properties" item. In the window that opens, select the "Hardware" tab and click on the "Device Manager" button.
And you can do otherwise. Without further ado, call the Run command window and enter devmgmt.msc in the command field - this is the name of the snap-in. The "Run" window itself is called either with the mouse from the "Start" menu, or with a group of keys "Win" + "R".

As a result, a dispatcher window will open, something like the one in the figure:

Go to the node "network adapters".
Expand this node.
Find a device in its list whose name includes the word "Wireless" - this is a wireless adapter.
Then right-click on its name and select "Delete".
Then go to the main menu of the dispatcher window.
And in the item "Actions" click on the item "Update hardware configuration".

If the network is still unavailable after that, try to dig deeper into the system services settings.

Automatic WLAN Configuration Service

The service in question may also be responsible for the problem. It is located in the same place as all other Windows services, at "Control Panel" => "Administrative Tools" => "Services". Look for the "WLAN autoconfiguration" service in the list and find out if it is running. To do this, right-click on the service name and select properties in the context menu that opens. A window similar to the one shown below will open:

Make sure the Startup Type is set to Automatic. If this is not the case, then set this parameter, and then restart the service by first clicking on the "Stop" button, and then on the "Start" button. Save the changes made by closing the window by clicking the "Ok" button.

If everything is done correctly, then the wireless network should become active. If this is not the case, then it is worth looking for other reasons for its inoperability - it may be the matter in the equipment itself.

Technique, especially computer technology, can sometimes behave extremely moody and present various surprises. Yesterday you could use your laptop without any problems, go online using your home wireless connection, receive and send hundreds of files and photos, use social networks... And today there is no Internet connection, and in a place where there was not a single error in the system tray yesterday, a mysterious message is glowing: "No available connections." And what to do in such a situation is not entirely clear. We will try to analyze the causes of such a problem in as much detail as possible and talk about the most effective ways its solutions.

First, we turn to those who have encountered a similar problem after buying a brand new laptop or have just reinstalled Windows. If in one of these situations on your laptop you see the message: "No available connections", then most likely there is a problem with the network driver, which may easily be missing from the system after reinstalling Windows. Another reason in laptops different models there may be a mechanically disabled Wi-Fi adapter. How to understand which of the two situations became the primary source of the problem in your case, you will learn from the instructions below.

If a Windows laptop reported connection problems extremely unexpectedly, and everything was fine yesterday, there may be several more problems, and we will tell you about each of them today.

Any device can experience difficulties in operation and even freeze, like Windows sometimes freezes. Since a router that distributes a Wi-Fi signal is, in fact, the same computer with an operating system and a processor, it can stop working, or it can freeze too. At the same time, a working indication on its body can mislead the user and create the appearance normal work device, but no signal comes from it at this moment.

The display on the device does not always indicate network problems

In order to return the router to its normal operating state, you need to unplug it from the outlet, wait a few seconds (7-10) and turn it back on. After giving the device a minute to turn on and start all systems, try again to check for available networks on your laptop.

If you receive a Wi-Fi signal directly from your provider, contact support and describe the situation, mentioning that you have no available connections. The operator will be able to remotely reboot their equipment.

Problem with a disabled network adapter

Please note that many models of modern Windows laptops provide a mechanical enable or disable the Wi-Fi connection function. This saves battery power. Find the toggle switch on the ends of your laptop that turns on the wireless adapter and turn it on. If such a toggle switch is not provided, then you can help special key at the top of the keyboard with a wireless signal. In the event that there is no such button on the keyboard, then, probably, the manufacturer has provided a certain key combination. Most often, this is the Fn function key and the F2 or F3 buttons. Please refer to the specific model manual for this information.

After turning on the wireless adapter in this way, try searching for available connections again.

Problem with software disabled network adapter

Also, the Wi-Fi adapter in your laptop can be deactivated in Windows itself programmatically. To enable it and repeat attempts to find available networks, you need to launch the Panel Windows management, go to the Network and Sharing Center, and then in the column located on the left side of the open window, click on the link "Change adapter settings".

You will see information about all the network adapters and connections contained in your laptop. Find "Wireless Connection" and enable it using the right-click menu.

After that, also try to find available Wi-Fi networks using the system tray icon. Perhaps the problem you are facing has been resolved and then you will see an available network. But it may well happen that the adapter refuses to turn on, the items in the context menu after pressing the right mouse button will turn out to be inactive, or the adapter turned on, but still does not see available Wi-Fi networks. In this case, proceed to the next paragraphs of our instructions.

The problem is the incorrect operation of the driver or its absence

A specialized program is responsible for the operation of each function of the Windows operating system. And a system program called a driver is responsible for the operation of each component in your laptop. It is she who corrects the operation of devices, gives them system commands and monitors the correct execution of these very commands. If the system does not have a driver or a version of it is installed that does not quite match this network adapter, you may also experience difficulties finding networks, connecting them and transferring data.

There may be situations in which the driver was installed, configured, and the system worked quite correctly, but after another simple reboot, you saw the message "No available connections", and you cannot go online. It is likely that your operating system has a program that is responsible for automatically updating and installing drivers. various devices, and after a reboot, a driver version was installed that did not match the network adapter model, or a test assembly that did not work as expected.

To update and install drivers for various components of your laptop, we always recommend using the two most reliable sources - the website of the manufacturer of the computer itself or the website of the manufacturers of its individual components.

Go to the manufacturer's website, download the latest version of the software for the network adapter, making sure that it is designed for the same version of Windows that is installed in your laptop. After that, complete the installation and restart your PC. To avoid problems when installing a new driver, we recommend that you first uninstall the existing one by finding your network adapter in the Windows Device Manager, right-clicking on its name and going to Properties> Driver> Uninstall.

After installing the latest driver and restarting the PC, re-search for available networks to make sure all systems are working correctly and to connect to the network.

The problem is incorrect system configuration or violation of registry settings

When all the previous methods have been tried, but none of them has given desired result, you can resort to really serious and deep troubleshooting and system malfunctions. This is especially recommended for those users who are sure that until the moment of failure, the network adapter performed its functions correctly and you did not interfere with its operation. In this case, the cause could be third-party programs and applications, their installation or removal, reconfiguration separate parts systems. Any of these actions could not be the most the best way affect the network performance in your laptop, and then it is worth resorting to the following actions.

If you have a backup of your system created using specialized software, try restoring the system to the state in which it was at the time of the last checkpoint. This procedure will undo all the latest changes in the system and return it exactly to the state in which your network adapter performed all its functions correctly. Please note that restoring a copy that is too old can deprive you of a large number of settings, programs and parameters that have appeared in the system recently.

If a similar backup if you have not, refer to the built-in Windows recovery system, which creates checkpoints during some key procedures performed with the computer. To do this, open the "Properties of your computer" by right-clicking on the "My Computer" icon on the desktop, and then find the "System Protection" item in the column located on the left in the window that opens. Press the "Restore" button and select the system state point that should be restored on your PC.

If system protection was disabled and checkpoints were not created, we recommend that you resort to a full OS scan and check the integrity of Windows files. For this, there is a special service that can be started using the command line.

Open up command line, manually enter the sfc / scannow command in it and press Enter on the keyboard. If the system contains corrupted files or some parts of the registry are not working in the most correct way, the scan service will try to detect them and restore them to their original state. This procedure can take quite a long time, and upon completion, a mandatory system reboot is required.

As a rule, troubleshooting when there are no available connections does not require serious skills and is rarely a reason to contact service center... You can restore the wireless adapter to work using one of the methods provided here. If the desired result cannot be achieved using one of the instructions, it may be necessary to combine several methods at the same time. It depends directly on the specific laptop model, its configuration and system parameters.

Quite often, many users of computers running the seventh and eighth Windows versions it may happen that a cross appears instead of the usual wireless connection icon, indicating that there are no connections available.

And this happens mainly on a fully working computer. At the same time, up to
At this point everything worked fine and it was possible to connect to the Internet, but now this is not possible. This problem can occur for various reasons, however, it all comes down to the fact that the operating system does not see the Wi-Fi module and considers it turned off, as a result of which it displays a message about the absence of connections. But you can fix this problem. There are several methods for this.

If Wi-Fi was not previously used on this laptop, or Windows was reinstalled

If a wireless connection has never been used on a laptop, but now a Wi-Fi router has appeared and you need to connect to it, but this problem arises, then you need to search the Internet for tips on why Wi-Fi does not work on a laptop.

The main thing that needs to be done in this case is to install all the necessary drivers that need to be downloaded from the manufacturer's official resource, but not the driver-pack. At the same time, it is necessary to download drivers not only for the Wi-Fi module, but also to maintain the performance of the laptop keys, which are designed to turn on the wireless adapter.

If the wireless network was working and now there are no connections available

If everything worked fine up to this point, and then suddenly this problem appeared, then it is necessary to check in turn all the methods described below. You can try to disconnect the router from electrical network, and then turn it back on. In addition, you should try using the "Troubleshooting" section that appears when you click on the Wi-Fi connection icon with a cross.

In addition, you need to check whether Wi-Fi is turned on on the laptop, if any, and also whether it turned out to be turned on using the function keys. It is also worth visiting the proprietary Wi-Fi network management program, if available. In addition, you need to make sure that the wireless connection is in the list of connections.

In the "eight", in addition to all the described methods, you should go to the "Control Panel" and select "Options". In this section, you need to click on "Change PC settings", and then select "Network" or "Wireless", depending on the version. Here you need to check that all modules are active. In 8.1 you need to check if
whether the "Airplane mode" item is enabled.

In addition, you should visit the official resource of the laptop manufacturer and download the drivers for the Wi-Fi module from it and install them. It is worth doing, even if such drivers are already available, it is still worth trying.

If after doing all this, nothing has changed, then you can try another method. It is not the easiest one, so it will not be so easy for inexperienced users to complete it.

Remove the wireless Wi-Fi module from the device manager, reinstall it

To open the device manager, you need to press Win + R and register the devmgmt.msc command, after which you need to click OK. Then in it you need to go to "Network adapters". Here you need to right-click on the Wi-Fi module. It is worth checking that there is no "Enable" item in the context menu. If there is one, then you need to use it and not follow the steps described below. If this is not the case, then you need to select "Delete".

After removing the device from the operating system, in the device manager, select "Action" and click "Update hardware configuration". This will start a search for a Wi-Fi module, after which all the necessary drivers will be installed on it. Maybe after that everything will start working.

See if WLAN Auto Config is activated in Windows

To perform this method, you need to go to the "Control Panel". In this section, you need to select "Administration". After that you need to click on "Services". In this section, you need to find the "WLAN auto-configuration" service. If it says "Disabled", then you need to double-click on it and set "Automatic" in the "Startup type" line. After that, you need to click "Run".

These are all ways to solve Wi-Fi connection problems. Surely one of them can help. They are all pretty simple. In addition, among them there are those that can be used even by novice users, while not harming the computer.

Quite a common problem for owners of laptops with Windows 7 or Windows 8 (8.1) - at one point in the notification area instead of the usual wireless Wi-Fi connection icon ...