Sewing French curtains with your own hands. How to sew a French curtain: preparation and sewing technology

Hand-knitted things are always in fashion. They are very stable in wear, the quality is much superior to the purchased ones. Even an inexperienced needlewoman can easily understand how to learn how to knit simple little things that are accessible to beginners.

Step-by-step knitting instructions on 2 knitting needles for scarves, socks, booties for newborns will help you learn new skills and add useful needlework techniques to your creative piggy bank.

Depending on the raw material, knitting yarn is natural and artificial. In the production of natural yarn, animal hair or vegetable fibers are used - viscose, wool, silk, linen.

Artificial yarn is made from synthetic threads - acetate, polyester, polyvinyl chloride, polyamide, acrylic. In addition, there are different kinds mixed yarn, using both natural and artificial raw materials.

The most popular wool yarn:

• regular wool- it is spun from sheep wool, this yarn of all natural species considered the cheapest and most affordable. It is coarser than other types of yarn, but at the same time it lends itself well to dyeing, including with natural dyes. The price is always available.
• Alpaca- this is the wool of the llama alpaca, which is bred in the mountains South America. Alpaca has only 22 natural shades from white to black, and is usually not dyed. It is very warm, soft and very expensive.
• Angora- angora rabbit wool, delicate, fluffy, shiny, lends itself well to dyeing in the most different colors. When knitting and wearing, it should be borne in mind that short angora fibers can “crawl out” of the threads. Therefore, if it is not properly handled, the angora quickly loses its edge. This is a very expensive type of wool.
• Mohair- wool of Angora goats. These are long-haired animals with a very beautiful wavy coat. Mohair is very light, fluffy and extraordinarily warm material for knitting. Mohair villi are very slippery and long; artificial or cotton thread is usually used to secure them. Therefore, mohair is never 100%.

Summer yarn for knitting consists of vegetable fibers. The cheapest and most common is cotton. It is hygroscopic, light, lends itself well to staining. Linen is a smooth, even yarn with a characteristic sheen, more elastic and heavier than cotton.

In the manufacture of silk yarn, defective silk cocoons, tangled and short fibers are used. After appropriate processing, the silk yarn acquires a magnificent appearance, the threads are shiny, even, very tear-resistant and elastic.

There is no pure silk yarn, usually cotton is used for the basis of spinning threads. Products made of silk yarn are easy to wash and do not wrinkle.

Artificial yarn is extremely diverse both in quality and appearance. Particularly attractive are synthetic threads with various fantasy additions - bumps, thickenings, dyed in different colors, boucle, long fluffy threads, shiny lurex.

In general, yarn is twisted from several threads, and may consist of one. In some types of yarn, the fibers can be very tightly packed and tightly twisted. In others, on the contrary, the thread is lighter and looser. Yarn varies in thickness and length of pile.

Needle sizes

The dimensions of the spokes are determined by their diameter. There are standard needle numbers from 1 to 10, which corresponds to their thickness from 1 mm to 10 mm.

You can determine the size of the spokes yourself with improvised means. If you attach a needle to centimeter ruler, then you can measure its diameter by eye and determine the corresponding number.

For knitting thin smooth yarn, small-diameter knitting needles are chosen. For fluffy yarns such as mohair, use at least size 5 needles.

It all depends on what task the knitter sets for herself. If you plan to create a product with a tight knit, then even for a thick thread, you can take knitting needles that are smaller in size. When knitting an openwork, loose pattern, thicker knitting needles are used.

Determining which needle number will suit the chosen yarn is easy. The thickness of the thread for normal knitting density should be at least twice as thin as the knitting needle.

Knitting for beginners on 2 knitting needles

How to learn to knit - clear step-by-step instruction for beginners. You first need to master this type of needlework on 2 knitting needles. You should choose medium-sized needles and a smooth thread of the appropriate thickness.

Before you start creating a product, you need to master the basic knitting techniques. Therefore, first of all, you need to try to tie a sample measuring 10 by 10 centimeters.

So it will be clear what density the knitted fabric is, how evenly the loops lie.

Set of loops

The thread must be placed on the left hand, stretched between the index and thumb. Hold it gently with three others.

The knitting needles need to be folded together with each other, and then insert their ends under the thread from the side of the palm and pull it slightly towards you. The result is a loop on the thumb. Now you need to insert the ends of both knitting needles inside the resulting loop. Then pick up the thread with index finger and drag.

Release the thumb and tighten the knot formed on the knitting needles. When dialing at the beginning of the row, there are always two loops on the knitting needles at once.

So, repeating these steps, dial the desired number of loops, which is indicated in the diagram or measuring the width of the future product using a centimeter ruler. Upon completion of the set, one knitting needle is carefully pulled out. All resulting loops remain on the left knitting needle. Now you can knit the first row.

Facial loop

The loose knitting needle that is in right hand, must be inserted into the loop from the front. Hook the thread and drag it to the right knitting needle. This technique of knitting is called classic.

Another technique is to insert the needle into the loop from behind. It is called "grandmother's front". When knitting facial, you need to make sure that they do not twist in the canvas.

Purl loop

The thread is superimposed on top of the left knitting needle. Then an empty knitting needle must be inserted under it and pushed into the loop. Then pull out the thread, which lies with a new loop on the knitting needle, which is in the right hand.

Nakid

You just need to throw the thread on the right knitting needle without knitting. In the next row, the yarn is knitted as a regular knit or purl, depending on the scheme or pattern.

Yarns always increase the number of stitches on the needle. Therefore, the knitting fabric becomes wider.

How to complete the product?

They complete the work with a special non-dissolving row. The first loop is removed on a free knitting needle. The second is simply passed through it, without tying. The whole canvas is processed in the same way. When the last loop is on the needle, the thread must be cut with scissors and pulled through it, tightening the knot.

English gum

English elastic is more elastic than regular elastic, so it is used in products that require greater elasticity.

First, you should tie two rows with a regular elastic band, alternating two purl and one front loops on the front side of the product.

1. In the first row, all purl loops are knitted according to the pattern, and the front loops are simply removed on the right knitting needle untied. At the same time, the working thread is left, without tightening it strongly, behind the front loop.
2. The second row is knitted according to the pattern, all front loops are knit, and purl - purl.

Openwork technique

Openwork knitting is always performed according to a special pattern. Its peculiarity lies in the fact that there are small holes in the knitted fabric.

You can make such a hole with the help of a crochet. At the same time, so that the number of loops does not increase on the knitting needles, the next or previous (before the yarn) two loops are knitted together with the front or back loop, according to the scheme.

The next row is knitted according to the pattern, including the yarn, it plays the role self loop. A hole in the canvas appears where the yarn was made. It can be performed anywhere in the row, regardless of where the two loops are knitted together.

It is necessary to ensure that the number of loops in a row does not increase due to yarn overs.

If it is necessary to make a large hole, then make a double crochet, wrapping the thread around the right knitting needle twice. In the next row, one turn around the knitting needle is knitted, and the second is simply discarded.

Circuit designations

Patterns are always read from the bottom, the bottom row is knitted first. The designation of even rows goes from right to left, and odd rows, on the contrary, from left to right. In some schemes, there are no purl rows, odd. Because they knit according to the pattern.

In one scheme, only one rapport can be presented to create a pattern. This means that it needs to be done several times either in the height of the product or in the width. As a rule, a decoding of the icons is indicated near the diagram of the figure.

If no explanation is provided:

• An empty square means no loop.
• Facial - indicated by a small vertical line.
• Purl - a horizontal line.
• Nakid - usually represented in the diagram by a circle.
• The triangle directed to the right side is two loops knitted front in front.
• Triangle directed to the left side - two front loops at the back.
• An oblique line passing through several empty squares at once means that it is necessary to cross the loops with each other. The number of loops is the number of squares. The top end of the line indicates the direction of the crossover.

For beginner knitters, it is better not to take fancy yarn and mohair into work, as they are easily tangled when knitting. To learn how to knit an even fabric, you will have to dissolve the connected section of the product several times and perform it again.

This is the only way to develop the necessary skills. It is almost impossible to safely dissolve a canvas with tangled mohair villi.

You should also refuse yarn, which consists of several twisted threads. Since it is not always possible to correctly stretch the loop, holding all the thin threads on the knitting needle.

The result is confusion, which will also be very difficult to dissolve, and it will look ugly in the product.

You can not take on a complex drawing or large work. You need to start your creative journey as a knitter with small and very simple things to do.

Most suitable option for a person who is just mastering the knitting needles, this is to knit the simplest scarf.

In the process of its manufacture, all the necessary skills will be worked out, the fingers will get used to holding the knitting needles correctly, the loops will begin to turn out even and neat. The speed will gradually increase.

How to knit a baby scarf

This is the simplest product, a completely inexperienced knitter will cope with it. For knitting a scarf, it is better to take a smooth yarn of medium thickness and pick up the appropriate knitting needles for it. The width of the scarf should not be too large, 10 cm is enough. The length is optional.

The number of loops cast on depends on the thickness of the thread. You can knit a children's scarf in garter stitch. All rows, both from the front and from the inside, are knitted with facial loops.

You can decorate the ends of scarves with a fringe. To do this, we cut the threads 10 cm long and stretch each through the loop in the last row. Fold the yarn in half and tie in a knot.

Classic men's scarf

How to knit a men's scarf for beginners is clear. The previous step-by-step knitting instruction on 2 knitting needles for a children's scarf is taken as a basis. It is only necessary to increase its length and width. The length of a classic men's scarf should be at least a meter.

A scarf is a two-sided product, which means that the pattern, both on the front side and on the wrong side, should look the same. Therefore, it is best to knit it with a garter stitch. Rubber also looks good. It is performed by alternating two front and two wrong loops in an even row, and in an odd one it is knitted according to the pattern.

You can also decorate the ends of a men's scarf with a fringe.

Snood scarf for beginners

Scarf-snood is performed both on two separate knitting needles and on circular ones.

It is necessary to knit a rectangle on two separate knitting needles, 50 cm high and a length equal to the circumference of the head or a little more. Then sew together its side parts.

It is most convenient to knit such a product on circular knitting needles. Before knitting the second row, you need to stretch the plastic wire between the loops in the middle. Then close the circle by knitting the last loop of the first row.

In this case, the entire snood scarf is knitted on the front side, which should be taken into account when creating a pattern.

Socks for beginners on knitting needles

How to knit for beginners step by step on 2 knitting needles socks - the simplest and most available technology. Work begins with 22 loops to knit the cuff for the back half of the sock. An elastic band 1x1 4 cm wide is knitted. Next, the work is done with the front stitch to the same height.

They begin to form the heel, reducing the loops by 2 in each row. At the same time, two loops are knitted together in front of the hem loops with an inward slope. After 12 loops remain on the knitting needles, proceed to expand the canvas.

The addition of loops goes in each row by 2. New loops are knitted through the edge loops in the previous row. As a result, 22 loops should appear on the knitting needles. The heel is ready, it's time to start making the sole.

The length of the sole depends on the size of the foot. For size 37, you need to knit the front stitch 8 cm. Next, the sock is knitted. This stage of work is very similar to the previous one, when the heel was formed. You need to decrease the canvas until there are 12 loops left, and then it expands again.

Now you need to make the top half of the sock. The length of this part is equal to the length of the sole.

The peculiarity is to pick up with knitting needles and knit the edge loops of the sole so that they do not need to be sewn.

Slippers for beginners

How to knit slippers for beginners according to the easiest pattern. This step by step master class allows you to make slippers on 2 knitting needles very quickly, in a couple of hours.

The slipper pattern is a rectangle, one of the corners of which is cut out so that the slippers do not look like a gnome's slipper with a pointed toe. Slippers are sewn on the sole.

For the thirty-seventh size, you need to dial on the knitting needles such a number of loops that it will correspond to 44 cm. Next, the fabric is knitted with a stocking stitch 7 cm high.

After that, the number of loops corresponding to 3 cm is closed from one edge. Here there will be a toe slipper. After that, another three centimeters in height are knitted. Slipper blank is ready.

Now it needs to be stitched correctly. First we make a sock - the cut corner is folded in half and sewn together.

Accordingly, the triangular part of the finished web is bent. Align it along the bottom edge of the side of the rectangle where the tip of the sock was sewn.

From the opposite end, where the heel will be located, we bend 17 cm of knitted fabric towards the toe. With one seam, the entire slipper is sewn along the sole. There is one more small seam that connects bow and sidewall.

We turn the slippers on the front side. Along the edge and the oblique seam on the front, you can lay a braid or tie it beautifully with a crochet.

We knit footprints in stages

When knitting footprints, you must adhere to the following steps:

Poncho for beginners

How to knit a poncho for beginners with knitting needles, because this product is voluminous. step by step principle Its manufacture on 2 knitting needles is very simple.

You need to tie two large rectangles, each 40x80 cm in size. The thickness of the yarn and knitting needles, the pattern can be chosen any. For inexperienced craftswomen, even a simple facial surface is suitable.

The main secret is in stitching the two resulting canvases. Each must be folded in half. Shoulders will be in the fold area. Then attach the narrow side of one rectangle to the wide side of the other so that you get a nice angle at the bottom of the poncho, and lay the seam.

We do the same on the other side.

Now you can process the neck by typing loops along the edge. A collar with a large lapel, like a sweater, knitted in a circle, is perfect for such a poncho.

Booties for newborns on knitting needles

These booties are designed for the length of the baby's foot 8 cm. They are made in garter stitch with knitting needles number 3.

Knitting begins with the part that is above the ankle and wraps around the shin. Then the toe is knitted, after which the middle part is knitted, connecting the sole and the top, then directly the sole and the back of the booties.

Progress:

1. Cast on 27 stitches and knit 12 rows. The last edge in each row is purl.
2. The next step is to make holes for the string. The next 2 rows are knit in stockinette stitch. Fifteenth row: 2 together, 1 yarn over, at the end of the row - 1 front and edge. The sixteenth row goes all purl.
3. We knit a sock, divide the fabric into 3 parts of 9 loops. Knit 17 stitches. The eighteenth loop is purl, after which the product must be turned over. And now only the middle part of 9 loops is knitted separately for 16 rows.
4. We proceed to the side part, here it is necessary to lift the loops from the sock canvas. First of all, we do this on the left side. Therefore, we knit the row to the end, and we start the left knitting needle into the edge of the previous row, pull the thread and knit it with the wrong one. Then we collect in this way another 7 loops to the end of the fabric. Next comes the left side of the canvas, which is done front. We turn the product inside out and do everything according to the drawing. Now cast on 8 stitches on the right edge. After that, the loops remaining on the knitting needle are knitted according to the pattern. There are 43 loops left, which are further knitted with a garter stitch for 12 rows.
5. We carry out the sole. In this case, only the middle part of 9 loops is knitted with the gradual attachment of the sides. First knit 25 stitches. Then the 26th loop with the 27th is performed together with the front. We turn the product over, 8 facial, 9th goes with the 10th together with the wrong side. The work is turned on the face, and the sole is knitted further in the same way. The loops that are knitted together follow the pattern. At the end of the sole, 9 loops remain.
6. Then the back is knitted. The edge loops of the remaining parts are connected. After the first row of the back, we remove the last loop on the knitting needle, which is in the right hand. Then we collect an additional loop from the hem, re-shoot the last loop from the right knitting needle to the left and knit them together with the front one. We turn the product, we perform a series of purl to the end. We remove the last untied loop on the right knitting needle, insert the left knitting needle under the hem side part. Then we drop a free loop from the right knitting needle to the left, and knit 2 together with the wrong side. So we continue to do until we come to the place where you need to make holes for the lace. In the next front row, alternate yarn overs and knit 2 together, while lifting the loops on the side of the product. Next, knit according to the pattern until the end of the product, until all the sidewalls are attached to the back of the booties. We close the loops.

This step by step diagram knitting on 2 knitting needles for beginners, as experience shows, is universal. On its basis, you can knit booties different models adding new details. All you have to do is show your creative fantasy.

You can decorate hand-knitted products with the help of embroidery with multi-colored woolen threads, beads, braids. Some craftswomen use natural materials - buttons made of pieces of wood, limiters for strings made of shell walnut, leather straps. A bold fantasy allows even inexperienced needlewomen to create impressive exclusive things.

How to knit for beginners step by step on 2 knitting needles:

Knitting socks on 2 needles:

How to knit booties on 2 knitting needles:

How to knit footprints on 2 knitting needles:

Home knitted slippers on two knitting needles are incredibly comfortable, light and easy-to-wear shoes for the house. You can buy them, or you can tie them yourself with your own hands, even if you have never done anything like this before.

You can learn to knit step by step description and lessons. This is not a very difficult task. The main thing is that a person has a desire, time and patience, because the first time it may not work out.

Note! Knitting slippers on two knitting needles without a seam is carried out by any type of knitting, and a pattern is selected at will.

Table: patterns for beginner needlewomen.

The above patterns are very easy to knit. It doesn't take much time or effort.

To create beautiful men's, women's or children's slippers you will need:

1. Two stocking knitting needles numbered "four".
2. Yarn about 150 grams. If slippers are supposed big size, then you need a minimum of 200 grams.
3. Centimeter.
4. Pin.

The choice of yarn should be taken seriously. Indeed, in the future, home shoes will be subjected to considerable stress and frequent washing, so choose durable, but pleasant to the touch.

If you are going to knit warm slippers, then choose yarn based on sheared sheep's wool with the addition of artificial fibers.

Table: the most common and popular types of yarn.

For summer slippers, cotton yarn is suitable.

The simplest tracks are knitted in stocking stitch.

An easy way to create cozy indoor shoes: step by step instructions:

1. Initially, a set of forty loops is made.
2. So eight rows are knitted.
3. Then you need to divide the piece into 2 identical parts with a pin.
4. We knit the first loop, we make a crochet, we knit exactly to the middle and we throw on another loop. We do this until the last one.
5. Yarn over the last stitch.
6. The remaining rows are knitted in a similar pattern with one remark: in each row it is worth adding three loops in the middle and on the sides. This is done until their total number becomes 66 pieces.
7. Then six more rows are knitted in stocking stitch.
8. After that, four rows are closed during the process with one loop.
9. Then we are engaged in the design of ten more rows using the hosiery method.
10. The loops that remain are closed.

Using the above technique, you can knit cozy and original seamless slippers very quickly. On average, the process takes from 2 to 6 hours, depending on the level of "qualification" and experience.

From the specified amount of yarn, shoes of size 37 are obtained (the length of the foot of a knitted masterpiece is 22.5 centimeters).

Table: the number of loops initially dialed based on the size of the leg.

Second option

If for some reason the first method failed to create the desired slippers for yourself, then try to knit them using the second method.

To create you will need:

1. Hosiery knitting needles at number three.
2. Yarn in the amount of two skeins of one hundred grams.

Step-by-step instruction:

1. We collect thirteen loops.
2. We decorate them in a garter way (only eight rows).
3. In the ninth row, edge, front, edge are added.
4. The purl rows are made according to the scheme, crochets are made on the purl and facial rows.
5. Do in this sequence until there are thirty-nine pieces.
6. Then select nine pieces in the middle and make a toe.
7. After that, the cloth is turned over.
8. We make out eight rows, and we do the ninth and tenth together.
9. In this sequence, we do until there are nine central pieces left.
10. On the sides we collect eighteen edging.
11. We distribute the collected:

    Five pieces of edging are made using the garter method.
    Twenty-one pieces of wrong side are made out with the front surface.
    Four is knitted with a tourniquet.
    Five pieces of edging by the garter method are made out.

12. Then we shift each next row by four loops.
13. At the end you should have forty rows.
14. The heel is done the same way as the toe.

Important! At the end everything is closed.

Two tone slippers

With the help of stocking knitting needles, you can create not only plain, but also two-color slippers that will please the eye and warm in the cold season.

Step-by-step instruction:

1. Initially, an odd number is typed.
2. Rows are made in a garter way from the ankle to the base of the heel.
3. Next, we count exactly half of the loops and place the colored odd thread.
4. Then we make out the garter knitting method, making two throws: the first is done before the central loop, the second after it.
5. Next, the product is knitted with a stocking method six rows.
6. After that, we go back to the scarf.
7. We reduce through a row of four loops.
8. Using the decrease method, we make eight more rows.
9. The last one is closed.
10. The panel is folded in half and connected with a pin seam.

Useful video

Slippers are a simplified version of socks that can easily replace slippers. You can buy heels in a store, order from a master, or you can knit them yourself, especially since it is not so difficult and even a beginner needlewoman can do it. There are a lot of knitting variations: using two knitting needles, three, four, round and so on.

If you knit traces with knitting needles, models with a description will be presented below, regardless of which option you choose, it is better to choose dense yarn, but at the same time not stiff, so that when worn, the product can take the shape of your leg. Also focus on the season, woolen yarn is perfect for the winter season, and for the spring-summer season, take natural light threads.

In order for the product to be warm, soft and serve for a long time, it is recommended to knit the sole in several threads, and the relief pattern will have a massage effect on the feet.

Abbreviations

For convenience, some abbreviations will be introduced:

• Row - r.
• Loops - p.
• Facial loops - persons.
• Purl loops - out.
• Center loops - center.
• Extreme loops - kr.

Instructions for creating the most common model

For work you will need:

• Yarn.
• Needles number 3, 5.

Consider traces with knitting needles, models with a description. Knitting pattern:

1. Cast on 5 stitches on the needles.

• 1r. - kr. 2 persons., n., center., 2 persons. cr. - should form 9.
• The next row and all even ones are purl, and cent. p. is thrown off.
• 3r. - kr., 2 persons., n., center., n., 3 s., cr. - should form 9.
• 5 p. - kr., 3 persons., n., center., n., 3 sheets., cr. - should form 11.

3. Formation of the foot. Divide 41 stitches into 3 pieces: 15, 11, 15.

• 1 p. - 15 persons., then the transition to another knitting needle 10 persons., 2 persons. in 1 p., coup.
• 2 p. - 10 persons., 2 persons. in 1 p., coup.

4. We continue the process as on the heel, knitting loops in the center and grabbing one at a time from the edge. As a result, 11 should remain in the center.

5. We are working on the side parts. Dial 15 sts on another knitting needle and follow the pattern:

• 1 p. - 9 out., 5 persons., 2 cr.
• 2 p. - all persons.

6. We knit the remaining 11 sts from the sole. On the other needle to form the second side, we collect 15 p:

• 1 p. - 11 p. from the sole and 5 persons., 9 out., 1 cr.
• 2 p. - coup and screed garter method.

7. We try on the length of the footprints and proceed to create the heel.

• In each row, 11 sts of the soles are central.
• We knit the last one with the capture of the loops from the side and make a uniform descent on the central ones, knitting twice - 2 p. In 1 p.

8. The final step. We close the remaining loops.

"Rectangular" tracks

You will need:

• Threads.
• Needles number 4, 5.

Scheme of knitting slippers with knitting needles:

1. Cast on 50 stitches.
2. We knit 20 rows with a handkerchief method.
3. The height of the product is selected individually, the final stage is the closing of all loops.
4. As a result, you should get a knitted fabric 37 centimeters long, the height is up to you. You can create traces with knitting needles with patterns. To decorate the top row, knit with openwork knitting using a hook according to the following pattern: form columns of 5 yarn overs every 3 loops. As a result, the outer part of the footprints will be decorated with a beautiful openwork pattern.
5. Next, the rectangular canvas needs to be bent at the base with an angle and the sole stitched. After that, the remaining part of the sole is stitched, and two elements of the upper part of the product are carefully sewn under the columns.
6. Tracks are ready!

Following this scheme, each craftswoman will be able to tie traces without much difficulty.

Knitted footprints on the sole with knitting needles

So, we knit footprints with knitting needles. Models with descriptions are given in this material. Another option for slippers is footprints on the sole. Ideal material there will be a felt insole for the sole. You can make insoles yourself: circle both feet on paper, and then transfer the resulting patterns to felt material. Please note that the insoles must be symmetrical! We put the finished sole aside and proceed to knitting the elements of the footprints:

1. In order to size 36, you need to dial 42 loops.

1. Knit with a garter or facial method for 2 cm.
2. Divide the loops into 4 parts:

• Leave the ends on the needles.
• We continue to knit the two central parts (20 p.) to the end of the little finger.

5. We knit a toe. Knit unfinished rows until 4 sts remain on needle.

6. We continue knitting, picking up loops along the edge of the opposite side.

7. To form the height of the track, we knit another 6-8 rows.

8. Try on the product on the leg, if everything is fine, close the loops. If there is not enough height, the rows should be knitted, then again try on and close the loops. Knitting finished.

9. Product assembly. Using a large needle, it is necessary to sew to the previously prepared sole.

10. Sew up the seam on the heel.

11. Warm slippers are ready!

Footprints with embroidery

And these are one more traces with knitting needles (models with a description will be useful for both novice craftswomen and experienced ones). This pattern uses a seamless knitting technique without elastic.

You will need:

• Yarn.
• Knitting needles - 4 pcs.

Step-by-step instruction

1. Cast on the required number of stitches depending on the size of your foot.
2. Knit 3-4 rows using the "smooth" method and start forming the heel on four knitting needles.
3. Next, leave traces on two knitting needles (set the rest aside for now) and continue knitting the heel height.
4. To create a heel wedge, we begin to knit by connecting two loops into one.
5. We close all side loops.
6. We collect edge loops and continue to work in a circle.
7. For creating required size we carry out the removal of loops in even rows on 1, 3 knitting needles.
8. We knit the desired length until the canvas overlaps the little finger or half of the thumb.
9. We begin to close two loops in even rows on 1, 3 knitting needles, until they become half as many. Decrease in both even and odd rows.
10. We tighten the last four loops with a thread.

We decorate knitted slippers with embroidery. You can make it both with multi-colored yarn and floss threads. The easiest way is to use the usual one and everyone can choose a drawing at their discretion.

Advice! Do not place the pattern so that it is in contact with the floor when walking, that is, on the side parts with a transition to the sole.

Warm house slippers

This technique is good for those who are familiar with knitting socks, but it will not cause any special difficulties for newly-made needlewomen. Slippers are designed for 41, 42 size.

Step-by-step instruction

1. We start creating the product from the top of the cuff. Cast on 60 sts plus 2 cr.
2. Knit 12 p. using the "American gum" method or 6 rapports in height.
3. For the 1st rapport "American gum":

• 1 p. - kr., 2 persons., out., 2 persons., out., cr.
• 2 p. - kr., persons., direct yarn over, 2 persons., throw the yarn over through 2 cr. p., persons., throw the yarn over through 2 cr. p., cr.

4. Repeat the pattern of these rows.

5. After knitting the cuff, distribute all the loops on 3 knitting needles:

• 1 - cr. plus 24 p.
• 2 - 18 p. Central.
• 3 - 24 p. and cr.

6. Take a different shade of yarn and continue the American Rib method on needle 2 (center loops), this will be the length of the upper leg.

7. Having finished the pattern repeat, it is necessary to start knitting the side element of the trace. To do this, on the sides of the previously knitted top, cast on loops, 30 from each edge, simply picking up the extreme loops on the knitting needle.

8. Then connect the thread with the beginning of knitting from the cuff, knit the side element using the "American gum" method - kr. plus 24 sts, the upper side piece - 30 sts, the color in the center - 18 sts, the second upper side element - 30 sts and the other section of the cuff 24 sts plus cr.

9. Turn the product over and continue knitting the second row of the pattern in the opposite direction.

10. Having created 3 rapports of a drawing or 6 p. in height with yarn of a different shade, change the color of the thread and knit 3 more rapports or 6 p. to the desired height of the side element.

11. Outsole. Attach the thread to the central part of the base (18 p.), And continue knitting with the “front surface” technique, while reducing the number of loops on the sides.

12. When working with individuals. R. discard 1 p. as faces., without knitting, knit the remaining 16 p., and knit the last 18 p. from 1 p. side part.

13. Turn the product inside out and remove 1 p. As out. Without knitting. Knit the remaining 16 sts, purl 18 sts. from 1 p. side part. When forming the sole of the track in each next row, you need to decrease 1 st from one side, then from the other side, however, the number of central ones should always be 18 sts.

14. As soon as there are 10 sts on the sides, proceed to decrease the base for narrowing the heel as follows:

• Remove on faces. rows cr. n. without knitting them, then continue faces.
• As soon as 3 sts remain in the row, knit two of them simultaneously from the first person, and tie the last one in one with cr. n. side element.
• The purl rows are knitted in the same pattern.

15. Thus, in each next row, decrease on the sides, as well as in the central area, as a result, 3 sts should remain.

16. Knit them with a single loop with a broach.

17. Cut the thread you worked with, and to secure the extreme loop, pull the tip of the thread through it.

18. Finishing work on the trace, sew the product according to back element from heel to cuff.

19. Try on the product and you're done!

1. Products can be knitted in different techniques, however, it is advisable for beginner needlewomen to start with simple models, where the knitting pattern is described in detail.
2. Do you want to create beautiful footprints with knitting needles? To give the product a zest, you can decorate it with various applications, pompoms, buttons and other decor.
3. Homemade knitted boots are very popular now, which are easy to form by simply lengthening the footprints with an openwork shaft. A high side is made from the ankle - an elastic band.
4. And also from knitted footprints you can create homemade moccasins. To do this, you need to sew on a thick insole and knit the sides above the ankle.
5. You can knit women's footprints with knitting needles. Some craftswomen improve slippers with a knitted ribbon. It is created after the manufacture of the side elements, captures the ankle and is fixed on the instep. And you can also tie a strap across the product, which will be fastened with a button.

Conclusion

Making slippers with knitting needles is a very creative process that requires time and skill. Try to knit any model you like, pleasing yourself or someone from home.