How to remove mesh from plastic windows. How to remove a mosquito net from a balcony door for the winter? Frame mosquito nets

Plastic windows have long been a very commonplace. They are found in almost every window opening, every house or apartment. On construction market they appeared a long time ago and almost immediately won the trust of consumers, as they have good properties and characteristics that satisfied all needs.

Buy metal-plastic windows you can in a specialized store, there is also an opportunity to get acquainted with the assortment and ask questions of interest to specialists. For example, the REMOKNA Almaty company provides a wide selection of these products, which can be found on the company's website.

One of the components of the window structure is a mosquito net. Of course, you can buy a window without a mesh, but having one has a number of advantages. This attribute requires special care. The mesh should be periodically removed and washed well.

Types of installation

There are three most famous and commonly used types of mosquito net installation:

on plungers;
frame installation;
sliding installation.

We remove the grid that is installed on the plungers

This type of connection is used frequently, and is one of the most reliable. This design involves screwing the top and bottom of the grid to the window frame with pins.

Grid dismantling technology:

unscrew each of the plungers that fix the pins;
pull out all fasteners;
carefully remove the mesh.

Removing the mesh

The constituent elements of this design are a metal frame and plastic or iron corners with a mesh stretched in the middle. Removed quickly and easily:

lift up the special handle by 2 cm;
after lifting, the lower fastening is released and the structure can be removed by pulling it to the bottom.

Removing the mesh

Sliding screens are installed in the windows - compartments. This design is special in that it is able to move around, as it is located on the guides with runners. To remove the grid you need:

lift it, and give it the opportunity to get off the guide;
gently pull the grid down.

These are the ways to remove mosquito net from the window. But be extremely careful and do not let the net fall off your hands and fall into the street. This is fraught with the fact that it will simply break and you will need to buy a new one.

The mosquito net installed on the window sometimes needs to be removed: this is necessary for winter storage to prolong the life of certain types of structures, or to clean them. Knowing how to remove the mesh from a plastic window , you will be able to do it yourself without damaging the mesh frame. Pick-up methods different types products may vary.

Regardless of what type of product you have installed, if you decide to remove the mesh, you need to choose dry, calm weather. The grid has large area, so a gust of wind can rip it off when you unscrew it, or snatch it out of your hands. Falling to the ground, with a high probability the frame will break. The rain will drip in the face, which is not very pleasant.

If the design has sashes, then how to remove the mesh from the window , you don't have to think. You just need to open one sash and unscrew the outer fasteners.

How to remove the frame mesh

It is easy to recognize such a structure: it consists of metal frame with plastic or iron corners, and the mesh itself is stretched inside it. The corners themselves are usually located on the side of the street, and they are not visible from the room. Most nets have special handles, so you need to pull them up to remove them. Raising the frame by 2 cm, this will release the lower fasteners, then the structure must be pulled down.

Before removing the mosquito net from the plastic window , keep in mind that just like that it will not pass through the opening. It will need to be deployed on the street, and then dragged into the room. Remove all interfering objects located near the window inside the room: first of all, this concerns the windowsill. If the mesh is equipped with pockets that are screwed to the corners of the frame, it can be removed in a similar way, with the only difference being that it will not need to be deflected up and down, but to the side.

How to remove the sliding mesh

If compartment windows are installed in the house, they are equipped with sliding nets: a feature of this design lies in its ability to move to the side using special runners and guides for this. They are located at the top and bottom. Guessing how to pull the grid out of the plastic window , no need. The mesh is removed elementarily, it is enough to lift it slightly so that it comes out of the guide, and then pull it down with an offset.

Removing sliding nets

If the mesh is pleated (able to fold into window opening), the technology of its dismantling is no different from the usual sliding one.

We remove the grid on the plungers

The pin connection is used quite often, as it is considered the most reliable. This design is screwed to the window profile on pins from above and below. You can remove such a grid only if you unscrew all the plungers that fix the pin, after which the mount can be removed and the necessary actions can be taken with it.

Removing the grid on the plungers

Advice: in order to prevent the plunger from being lost, it is recommended to rotate the pin only clockwise.

Other ways to remove the mesh if its design is different I

Thinking about how to remove the mosquito net from the window , it also occurs in cases where it has some special structure: for example, an old-style mesh. Such structures are screwed to the frame with self-tapping screws or nailed with nails. You will need to pull out the fasteners or unscrew it. Leaving the holes left by the fasteners in the public domain is not recommended: they should at least be sealed with tape.

Removing mosquito nets on hooks

If you are dealing with a door mesh, then keep in mind that it is attached to its own hinges. To remove it, you will need to unscrew or disconnect them, depending on which loop is installed. Some difficulties can organize rolled nets, as they are placed above the window in a special box. Without dismantling the box, it is usually impossible to remove the canvas. If the frame is held on the flags, they will need to be bent, only after that it will be possible to dismantle the structure.

Conclusion: knowing how to remove a mosquito net , you can, if necessary, clean and repair it or clean it for the winter, if you do not want the canvas to experience additional loads.

And the design, you need to know how to remove them.

Such protection has a large windage and it will be very difficult to keep it at the time of bad weather.

Removing the frame structure

The classic version of the frame mesh is made in the form of a quadrangular frame, most often in the form of a square or rectangle. Fastening to the window is carried out in several ways:

Using plungers.
Hook fastening.
On special pockets and Z-shaped holders.

Due to the wide variety of designs of mosquito nets, there can be no standard way to remove this device from a plastic window.

Consider the types of grids and how to dismantle them.

Fixation on holders and pockets

Difficulties in removing these parts are almost not felt, since the fastening elements are very similar. By the handles located on the frame, it is raised to the stop and the lower area of the frame is moved away from the window so that it passes near the mounts when lowered. The mesh is slowly removed from the fasteners. Now you need to take the frame and deploy it horizontally. In this form, it will be convenient to bring it into the room for storage or cleaning.

First of all, it is important to check whether the handles are securely fastened. Otherwise, they may suddenly break off at the most inopportune time, which will lead to the fall of the grid, and it will need to be repaired.

We remove the frame on hooks

This method of fixation involves attaching hooks to the frame itself. The frame is attached to the inner area. Thus, when fastening on hooks, it is possible to remove the mesh as described above. But if the fastening is made using metal hooks, it is necessary to take into account some nuances that will allow you to cope with the removal.

For this method of fastening, the mesh is installed so that its central part is slightly recessed in the window opening - it must be structurally designed for this. Each hook is fastened with one self-tapping screw, so that the hook can be turned if necessary. For dismantling, slightly loosen the screws, and carefully turn the hooks inward. In this case, the hooks located below do not need to be touched. After completing the sequence of actions, the upper edge of the structure can be easily pushed outward, the frame can be lifted up and removed from the window opening.

If the hooks are tight to the side, you still need to loosen the self-tapping screw. Otherwise rubber compressor can be torn.

Dismantling the grid on the plungers

When fixing the mosquito net with plungers, such a fastening can be considered the most reliable option; it will be more difficult to dismantle a fixed one in this way. To do this, first of all, two plungers are simultaneously pulled out of the lower profile. Further, slightly pushing the structure, the upper plungers are pulled down. The work is easier to do with an assistant who will hold the frame so that it does not fall.

In some cases, plunger fasteners come out of the holes with the mesh without additional effort.

Removing the sliding structure

Most often, this method of fastening is used on compartment windows. The frame must be removed from the guide rail along which the movement is carried out. To correctly dismantle the moving frame, it is lifted and removed from the rail, and then pushed aside, lowered and removed.

If there is a pleated or sliding mosquito doorlocated on a loggia or balcony, it can be removed in a similar way.

About Roll Mesh

At the core roll construction there is a roller mechanism. Its work is carried out similarly to the work of a sliding grid. To remove it, it is necessary to dismantle the entire mechanism, including the guides. The work is not easy to do, since the mechanism mount is located outside. While unscrewing the screws, you need to hold the entire structure so that it does not fall. It is much easier to dismantle the grid from the balcony, but this is not always possible.

Perform dismantling winter period not required.

We have tried to present the material as clearly as possible so that you can use this article as if it were a manual.

Video

Watch a video on how to remove and install a mosquito net:

This video is about the types and variety of mosquito nets.

The frequency and variety of problems that arise when removing a mosquito net prompted us to detail how to properly remove it from a window. No pain, no damage, no loss.

Removing the grid is a simple process. One has only to deal with the mount and the type of construction.

Frame-type mosquitoes are attached to the window in 4 ways:

Z-fastener (metal or plastic)
lambs (plastic flags)
hooks (metal brackets)
spring rods (pin, plunger fastening)

Most tutorial videos on how to remove a mosquito net show Z-mounted or hooked nets as an example. This is a common option for fastening frame structures, and it is convenient from the point of view of dismantling. To remove the frame mesh from the window, you need to slightly lift it up, holding the handles, remove lower part and deflect the structure from the window by 2-3 cm. Now lower the mesh down, freeing it completely, turn it over to a horizontal position and bring it into the room. The grid has been removed!

We think that there will be no questions about how to remove the mosquito net if it is attached to the “lambs” (“lambs” you just need to turn). But we will tell about how the mosquito net fixed with plungers is removed separately.

To dismantle the structure on spring rods, unscrew the plunger from the hole. If it didn’t work the first time, try turning the plunger pin several times. Turn clockwise (!), otherwise you may lose parts by spinning the plunger.

Sliding grids are installed on sliding windows and fastened with the help of guide bridges (top and bottom) and runners, similar to doors in sliding wardrobes. The sliding mosquito nets are also easy to remove. Raise the mesh slightly upwards, holding it by the fasteners specially designed for this purpose, remove the runners from the lower bridge, deflect the mesh and remove it from the window, releasing the upper runners.

The pleated mesh can be moved to the side and folded like an accordion until spring. As well as rolled nets, which are twisted into a box for the winter.

General recommendations on how to properly remove a mosquito net from a plastic window

2. Ask someone to back you up: sometimes you have to lean out of the window to remove the net

3. Control power. Mosquitoes are removed quite easily and, if overdone, you can break, for example, plastic fasteners

3. Don't lean on the net! Never and never!

4. After removing the mesh, rinse it and dry it in a horizontal position.

With the onset of cold weather, the need for mosquito nets disappears, since annoying insects disappear until spring, and windows are opened much less often for ventilation. So that the nets do not gather dust in vain and do not wear out, it is recommended to remove and store them for storage, even if they do not prevent the window (or door) sashes from opening and closing.

The procedure for removing products is quite simple, but differs slightly depending on what type of mesh you want to dismantle. It also depends on the method of attaching the structure to the window or window opening.

General principles of mesh dismantling

The structures should be removed in favorable weather without wind.
It is desirable that the net is held by assistants (if possible).
Fasteners can be removed through the window sash in the neighborhood.

How to remove the mesh on the frame

The mesh on the frame is a quadrangular structure of metal or plastic profile, between which a mesh fabric is stretched. It is attached to the window in one of three ways: with the help of corners (PVC or metal), pockets, fasteners-flags. Fastening is made for the corner parts from the outside.

Such a grid is removed by lifting plastic handles with simultaneous deviation from the frame of the lower part. After the lower corners are blown out of the mounts, the frame can be intercepted with one hand at the bottom and, turning horizontally, brought into the room.

Similarly, the product with mounting brackets placed on the frame is dismantled - the structure is lifted, deflected and removed from the mounts.

The mesh with fastening in the form of hooks is easily removed (the hooks are located on the mesh and, when fixed, cling to window profile with inside premises). When lifting and tilting the frame, the anti-mosquito protection is easily separated from the window. The mounts themselves are not removed from the frame.

How to remove sliding nets

Insect nets sliding type are attached to the window using a special guide, which simultaneously performs the role of a rail along which the structure moves. The product may have one or two guides, which are placed at the top and (or) at the bottom of the frame. To remove such a mesh, it is lifted so that the roller comes out of the groove of the guide. Then the structure is lowered and removed from the window.

Pleated mosquito net - one of the sliding options. It is more compact and conveniently folds when opened. The structure should be dismantled in the same sequence as a conventional sliding grid.

How to remove meshes on plungers

Pin fastening, more often called plunger fastening, is considered the strongest and most durable. It provides for fixing the mesh in the window opening using pins with springs inserted into specially prepared holes. To remove the structure, the pins must be removed from the recesses, for which they should be turned several times in the clockwise direction. It is not allowed to rotate elements in reverse side, as this can cause the plunger to spin up and scatter it into parts.

How to shoot other types of meshes

To dismantle old meshes nailed or screwed with screws, you will have to use a screwdriver or wire cutters. The fasteners should be removed from the frame, and then the mesh itself should be removed. Holes in the frame can be sealed with adhesive tape or putty.

Nets that are attached to door or window frames with the help of loops, it is necessary to remove them from them, lifting the structure up.

Modern roll models are removed assembled together with a pencil case in which the canvas is removed.

Certain difficulties may arise when removing the mesh with a flag mount - after all, the mounts located on the outside must first be bent. The procedure is quite risky, so it should be performed only with insurance or with an assistant who will support you. The "flags" of the fastening from the side of the street are bent, while you need to lean out from the adjacent part of the window. After the fasteners are unfastened, the mesh can be easily removed.

In principle, the process of removing the mesh is quite simple and does not require special skills and abilities. Nevertheless, in order to avoid any hitches and difficulties, this operation can be performed once under the guidance of specialists during the installation of the structure.